Search Results

Search found 1192 results on 48 pages for 'c w holeman ii'.

Page 29/48 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

  • Strange performance from RAID5 using WD RE4 disks

    - by Howard
    I've noticed a bit of a performance issue with some WD RE4 drives I'm using under AMD's hardware RAID solution. First a bit of background: Environment: Windows 7 home premium x64 HDD's: 3x 1TB WD Raid Edition 4 in a RAID 5 setup with 128 kbyte stripe (2TB usable space) Testing Tool: HD Tune, process set to "High Priority" Processor: AMD Phenom II x6 1100T Ram: 16GB DDR3/1600mhz Motherboard: MSI 970A-G45 The image below pretty much depicts the issue I'm having. Every test has the same thing, a period of similar length where the performance drops to a few megabytes a second. This can't be a TLER issue as the purpose of RE4's is to work around that. Any help would be greatly appreciated.

    Read the article

  • Error installing Windows7 64 bits on VirtualBox

    - by MetaDark
    I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

    Read the article

  • Compiling Assembly Manually [migrated]

    - by John Smith
    I am having trouble with translating a specific line in assembly to machine code for the Nios II. I have successfully compiled these lines: START_TIMER = 0xF68C r0 = 0x0 r8 = 0x8 label = 50000 addi r8, r8, %lo(label) - 01000 01000 1100001101010000 000100 subi r8, r8, 1 - 01000 01000 1111111111111111 000100 bne r8, r0, START_TIMER - 01000 00000 1111011010001100 011110 The line in question that I have trouble with is this one: orhi r8, r0, %hiadj(label) As explained in the handbook linked above, "%lo" means "Extract bits [15..0] of immed32" and "%hiadj" means "Extract bits [31..16] and adds bit 15 of immed32". However, 50000 in binary is 1100001101010000, and is therefore a 16 bit number. As far as I can see, it doesn't contain any bits between 16 and 31. I tried with 0000000000000001, but it's incorrect. What am I doing wrong?

    Read the article

  • replacing 3 Cisco Catalyst 4500

    - by hoberion
    Our network supplier recommends replacing our 3 cisco catalyst 4500's because they are EOL and dont speak OSPF (which we really want) Its not my area of expertise so I cant say for sure if we really need to replace these units but for my company the estimated costs of 250K euro is a huge problem. Is there any way to cut down on costs (without moving from cisco devices), I heard the 4500´s can speak ospf but would need an upgrade of sorts? edit: version: IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version 12.2(20)EW, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) supervisor: WS-X4013+ Cisco Catalyst 4500 Series Supervisor Engine II-Plus density: WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45)

    Read the article

  • Recommendation for PCI SATA addon card?

    - by edmicman
    I have a couple of dead PCs from my wife's office that have working SATA HDDs. Sorry, I don't know if they're SATA I or II, just that they're SATA. Unfortunately, all my spare hardware at home is pretty old; all I have is IDE support. I was thinking I could get a PCI addon card on the cheap that would support SATA and put together a budget server of sorts to play with and be able to use those drives. So I've got a couple questions: After some searching it looks like I can get an addon card for ~20 bucks, but it looks like they're all SATA I? Would that matter? It looks like going to SATAII bumps the price up to $40-$60 or so. Are there any recommendations on a card to get?

    Read the article

  • IBM PS/2 Keyboard with OS X 10.6 and PS2->USB Converter

    - by public static void
    Just got a new Mac Pro at work and as I can't stand the ZX Spectrum-esque 'dead flies' feel of the new Apple keyboards, I brought my trusty IBM SpaceSaver II to the office (with a USB/PS2 adapter) All seems generally to work ok - even the Trackpoint 'nipple' but periodically the modifier keys, notably the Ctrl and Windows keys seem to go into 'sticky' mode so that typing an 'S' brings up the save dialog, 'O' = open dialog etc. etc. Its generally fixed by switching windows and then returning back to the offending one, but this is really beginning to cheese me off. Can anyone suggest a fix?

    Read the article

  • Battery backed write cache behavior upon disk change

    - by Halfgaar
    We use 3ware Inc 9650SE SATA-II RAID PCIe RAID controllers with battery backed write cache. Our spare hardware has the same controller. I was wondering; are these controllers smart enough not to sync the cache when the disks have been changed? For example, if I deploy one of those spare machines by putting in the disks of another machine and that spare machine still has pending writes, will it be smart enough not to perform those writes on the replaced array? Edit: my scenario is not really made clear, so let me give an example: server1 goes down because of power supply failure. I put the disks in server2 and start. I repair server1 I put the disks back from server2 in server1 (it's not relevant right now that in reality I would probably keep server2 running). If server1 doesn't have safeguards, it will write to the array, thinking it's simply powering up again, corrupting it.

    Read the article

  • XenServer migrate machines between hosts

    - by Hubert Kario
    I have a XenServer 5.6 Free setup with 5 VMs (Windows and Linux) using about 1.5TB of directly attached storage. Because our virtualisation needs have grown a bit, we currently are preparing a faster XenServer 6.0 Free machine with more RAM and a more storage. Again, directly attached disks. How can I migrate the VMs between XenServer machines? I don't need to keep the machines up and running during migration, but using VM export and import would definitely take too long. Would making a VM with the same configuration on new host and dd'ing the LVM volume over network be the only quick and least painful solution? Are there any "gotchas" I should look out for when doing something like this? The old machine has an AMD Phenom II, the new has Intel Xeon E5 CPUs.

    Read the article

  • Increase performance of Samsung 830 256GB SSD

    - by Robert Koritnik
    I have a Samsung 830 SSD in my notebook connected to a SATA interface. This is a rather old HP notebook nc8430 which means SATA is SATA I and not II or even III that disk supports. But SATA I still supports speeds up to 150MB/s so I expected at least double values as per image below. CrystalDiskMark shows rather slow performance: I've been using this SSD for over a year now and I would like to know what to do to make it blazingly fast as other reports say it should be? Edit As suggested I'm adding AS SSD screenshot of the test. And Samsung Magician's benchmark which is likely biased...

    Read the article

  • ASUS EAH5770 CuCore problem: VLC Stutting!

    - by aiacet
    Hello to everyone and thank you in advance to all the people that will want help me. Like in the title my problem concernig this boring stutting when i play a Tv series episodes or a film on VLC whit my mew PC. Pc components are: AMD Phenom II X4 955 Black Box 125W Asus M4A785TD-M EVO Radeon HD5770 1GB GDDR5 Asus CoolerMaster GX 650W G.Skill 2x2GB PC3-12800 1600Mhz-787 4GBECO Western Digital 1TB SATAII 64MB Monitor are SyncMaster 920Nw OS: Windows XP 32 bit Display adapter drivers are updates at the latest release (catalyst 10.4) and also the ATi Vga bios are updated Besides when i play the same episode with DivX Plus Player i have video and audio stutting. I can play very well Dragon Age Origin and other games but i'm unable to see a beutyfull movie. Please help me

    Read the article

  • How to scale out OpenStreetMap data efficiently

    - by Pierre
    For over a year now, I'm running an in-house PostGIS server filled with OSM data, used for both Mapnik-based tile generation and Nominatim-based geocoding, updated with day replicates. This works pretty well. However, as usage is growing exponentially, I would like to achieve better reliability and performance by adding additional PostgreSQL servers. And I'm kind of lost. Since PostgreSQL doesn't seem to handle replication by itself, I would think about using a piede of middleware like PgPool-II to keep the servers in sync. But I'm afraid it would be nothing but necessary for this usage : very high read-to-write ratio, where all writes are done at the same exact time every day. My questions are simple : What would you do to keep these servers in sync? And, what is done for this at the OpenStreetMap Foundation, MapQuest, Mapbox or CloudMade? Thanks.

    Read the article

  • Sporadic disk clicking sound

    - by Abdó
    Hi, I'm having some unusual and sporadic hard disk clicking issues. Here is a cronological description of the facts. I'm using an ASUS P6T-SE with Intel Core i7, 6Gb RAM 600W Power supply and ATI4670 graphics, running Ubuntu 10.10. About one month ago my hard disk (SATA II Seagate Barracuda 1Tb 7200 rpm) started making a clicking sound: a sort of loud tic-tac, every second or so, when involved in disk activity. The system was clearly slower than before at disk access, but it was functional and I could not find any signal of trouble on the linux logs. I disconnected the disk and tried an older SATA drive I had around: no problem with it. Then I reconnected the Seagate disk, and the problem was mysteriously gone. Ubuntu booted normally, usual speed, no clicking. A couple of weeks later, the problem reappeared. I tried disconnecting reconnecting (as it somehow solved the problem before) without luck. So, despite it was a rather new drive, I assumed it was a hardware issue, made backups and bought a new drive. The new drive is a SATA II Seagate Barracuda 1.5 Tb 7200 rpm. I installed both drives at the same time, with the intention of transferring my files from on to the other. To my surprise, when I booted the computer with both drives, both started making the clicking sound !! Even worse, I removed the old drive, leaving the unformated new drive connected, and booted from a LiveCD. It kept clicking ! Puzzled by this, I tried both drives on my laptop with a SATA to USB cable. At the moment I connected any of them, they made one or two unusual clicks and immediately stopped doing that and worked normally. The old drive I thought almost dead, was working like a charm as if nothing happened. Then I thought: "ok, it must be the motherboard. Let's try again". So, I reconnected the old drive to the ASUS P6T motherboard (the same cables and SATA port as before), and it worked as if nothing happened ! The problem was gone again. The new 1.5 Tb drive was also working ok: No clicking nor slowdown. So I left the old 1Tb disk connected and kept using the computer daily during 3 weeks, until today it happened again. Now I don't really know what to do or check. I'm not even sure if it is a hardware issue any more ! This is rather annoying as it seems it happens with a period of 2 or 3 weeks and I have no means of forcing it to happen. Does anyone have a clue of what can causes this behaviour or have any suggestions of things I should check when it happens again ? What I did today is checking some SMART parameters Error log: smartctl -l error /dev/sda. No errors Short selftest: smartctl -t short /dev/sda. No errors Disk Health check: smartctl -H /dev/sda. passed And here are the vendor specific parameters (smartctl -A /dev/sda) Which I'm not quite sure how to interpret. === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 235962588 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 187 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16348045 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3590 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 94 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295164029 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 057 045 Old_age Always - 30 (Lifetime Min/Max 19/31) 194 Temperature_Celsius 0x0022 030 043 000 Old_age Always - 30 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 037 026 000 Old_age Always - 235962588 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 73950746906346 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1832967731 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3294986902 Any clue to this mystery will be really welcome. Thank you very much !!

    Read the article

  • How to lock the c prompt?

    - by allindal
    Is there anyway to lock the command prompt? I need my computer to require a password to use the command prompt. I lock the workstation occasionally but sometimes I forget and if I could just prevent my roommate from doing the "c: net user user *" to change my password it would be great. I do not want to have to use the rundll.32 user command with script to automatically lock the computer. Just a way to lock the c prompt. Sorry for not saying this earlier, I'm running a vista 32bit Asus gene II motherboard with a core i7 CPU

    Read the article

  • Computer cables explained

    - by Robert English
    I've noticed lately that places to learn about both power supply cables and also peripherals and fans aren't that easy to find. There's very little information available that gives detailed explanations of what cables are used inside a computer. What I found was very dated and often lacked detailed explanations. For someone planning out their first build it would be great way for this to be explained all in one place, like here! Important things to know about cables and connections in a computer? What are their names? Where do they connect to and why? What typical Voltages do they output? Changing Voltages for Overclocking? Please refernce PSU cables(Full modular, Modular and Non-Modular,24-pin, 20+4-pin etc), SATA(I, II, III), Molex etc. EDIT: Forgot to mention any information about PSU rails would also be appreciated :)

    Read the article

  • Startup error BackgroundContainer.dll on windows 8.1

    - by Manolis Karagiannis
    I have the same problem with this topic! How to resolve BackgroundContainer.dll error on startup? The thing is i did everything that says in answer but i)I found nothing when i started regedit.exe and searched (F3 or CTRL+F) for BackgroundContainer.dll ii)I made a full scan with AntiVirus Scanner like Microsoft Security Essentials/ Defender and also i scaned my PC with Malwarebytes' Anti-Malware,but i found nothing. So this pop up message on start up keep appeared! any idea? Thank you!

    Read the article

  • What happens when you add a Graphics card to a i7 with build in graphics (e.g. HD 4000)

    - by Matt
    I'm thinking of upgrading my computer from an AMD Phenom II X4 955BE with a AMD Radeon HD 6800 Graphics card (not integrated) to using a Intel Core i7 3770. As I have no knowledge of integrated graphics, my question is, what happens to the computing power when not using the HD4000 integrated graphics of the CPU (does it mean the CPU will run faster then it would if I relied on it?) Also what is better the CPUs inbuilt HD4000 or my Radeon Graphics card? I am mostly interested in terms of content creation: Using Adobe After Effects, 3D Rendering etc. Not too bothered about gaming performance. I will be using the spare parts of this build and older systems to make a second computer for network renders so what will be the advantages of keeping the Radeon with the current system for that?

    Read the article

  • Minimum Requirements for (open) Solaris?

    - by Electrons_Ahoy
    I'm thinking about knocking together a Solaris box at home to act as a combination server and learning exercise. What are the minimum hardware specs I can throw at it such that it'll be actually usable? I'd be cobbling the machine together from a stack of various x86 PC spares/leftovers. Does anyone have experience with Solaris at the lower end of the spectrum? The Sun site, for example, claims it'll run with as little as 255 megs of ram, but is it worth the exercise with less than a gig? Will my old Pentium II 450 cut the mustard? (I'm willing to throw a couple of bucks at pricewatch/mwave/newegg on this, but if I need to build a better rig than my main PC, I may not bother.)

    Read the article

  • Missing Jumbo and MTU for Broadcom NIC?

    - by Mike
    I have two Broadcom BCM5708C NetXtreme II GigE NICs in my Dell Windows SBS 2008 server. I would like make one them them Jumbo Frames enabled so that I can add it to my SAN whose VLAN on the switch is already using 9000 MTU. Broadcom's own data sheet for this NIC claims that it is Jumbo Frame capable up to a 9000 MTU. The problem is that there is no setting for Jumbo or MTU in the NIC's configurable settings. There are other settings but just not the one I need to change. Am I missing something here? The driver claims to be up-to-date when I allow Windows to search on-line.

    Read the article

  • Is Windows Server 2003 on 96 MB possible?

    - by Nifle
    I have an old laptop, a Pentium II with 96 MB. I have had Windows 2000 on it for ages, it was slow but usable. But now I have to upgrade since I can't get my USB-wlan drivers to install (the old PCMCIA network card broke). I would prefer to install Windows XP but I have no spare licence, but I do have a Windows Server 2003 licence. Do you think it's possible (and usable) to squeeze in 2003 on this computer? Edit: Unfortunately 2003 simply refuses to install on the laptop. It hangs with an error message (paraphrased) 2003 has detected a problem with your computer and has halted the installation to prevent damage. And then some error codes This happens very early in the installation while it's copying the installation files just after I accepted the licence. So I give up for now.

    Read the article

  • xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)

    - by mazgalici
    root@mazgalici:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-28-server i686 Ubuntu Current Operating System: Linux mazgalici 2.6.18-194.26.1.el5.028stab079.2PAE #1 SMP Fri Dec 17 19:34:22 MSK 2010 i686 Kernel command line: quiet Build Date: 10 November 2010 11:25:26AM xorg-server 2:1.7.6-2ubuntu7.4 (For technical support please see ) Current version of pixman: 0.16.4 Before reporting problems, check to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 11 01:28:48 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log

    Read the article

  • File corruption

    - by firesoul
    Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

    Read the article

  • Lenovo ThinkServer TS130 1105 - does 32/64 depend on RAM?

    - by Ecnerwal
    Just got in a Lenovo ThinkServer TS130 1105 (Xeon E3-1225V1) and a (new, sealed, holographed, looks legit) copy of Windows Server 2008 32/64 (standard) to run on it for a pretty lightweight job (currently handled, adequately, by a terrifyingly old Optima P4 running Windows 2000 server - really lightweight, but long-past-due for replacement, without any particular need or excuse for server 2012...) The 64 bit disc sits there and does nothing. The 32 bit disc boots. I haven't spotted any mention of this in the TS130 Manual (I have now combed it, and find no mention of a need to populate in pairs - a preferred order to populate in, yes, but no mention of pairs being required) but I begin to wonder if it's due to the fact that the 4GB RAM suppled with it was a single DIMM, rather than a pair. Better for upgrading, but perhaps requiring an upgrade (or sidegrade) right away to install the x64 version?? Anyone know? I tried the 64-bit DVD on a desktop with an AMD Athlon II X4 635 processor which normally runs Windows7 in 64 bit, and it booted up just fine.

    Read the article

  • I have problem with pc. Random reboots with post hyper transport sync flood error

    - by user29867
    I have problem with my pc. Random reboots with post "hyper transport sync flood" error. It happens completely random. Most times i watch movie, some times when i play a game, even when i browse internet. My spec are as follow: MB ASUS M4A78-E CPU Phenom II 940 Sapphire Radeon hd4850 Vapor-X RAM OCZ DDR2 PC2-8500 kit 2x2GB PSU CM Real Power M520W CASE CM Centurion 590 Temps of MB, CPU and 4850 are in normal range. MB is hooter, around 60-70°C under load, Radeon 60-65°C under load (playing game for couple hours). CPU dos not past 50-55°C. So i think its not a cooling problem, CM case is pretty good, and have a lots of fans. I try with this memmory: TWIN2X4096-6400C5DHX same problem.

    Read the article

  • Tests for hard drive health

    - by Samik R
    I have a 5-year old hard drive (bought new at the time), but it was sitting in my closet for 5 years, unused. I have just started using it, and seems to be getting a whirring sound (rather distinct from the other noises like fans etc.). I ran a few diagnostics tests, like Seagate's SeaTools, and the SMART test, and a few generic tests and all passed. Should I be concerned? Is there any other test that I should run? It's an internal IDE WD 5400RPM drive. Being used for a desktop, which is itself pretty high-end (AMD Phenom II X6 1100T, AMD Radeon GPU etc.), but would be used rather occasionally to begin with (avg. 1-2 hrs. per day). Thanks for any pointers.

    Read the article

  • Mac OS X Lion (10.7.3) Virtual Machine?

    - by Ben Hooper
    I have been looking into this for a while and have attempted quite a few "solutions" (hackintosh boot images, universal unlockers, etc) before I gave in and asked for help. I know this is extremely difficult to accomplish, especially with an AMD CPU, but it has been done and it can't hurt to ask. Question Does anyone know of any way to actually get Mac OS X Lion (10.7.3) to boot in VMware Workstation 8.0.2? I know that Mac OS X is heavily dependant on hardware configuration, so I will post my PC's hardware below, if it helps. As far as I know it's only reliant on the CPU, but I will post it all just in case. PC Hardware Motherboard: ASUS M4A77T CPU: AMD Phenom II x4 955 Black Edition Graphics Card: Palit Sonic Platinum nVIDIA Geforce GTX 460 Memory: G-Skill [RipjawsX F3-12800CL9D-8GBXL] 8GB PSU: Arctic Power 700(W) Hard Drive: SAMSUNG HD204UI 2TB Thanks in advance. :)

    Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >