Search Results

Search found 1446 results on 58 pages for 'dropped'.

Page 29/58 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• MDADM RAID5 array showing as CLEAN FAULTY

  - by Dean Reilly

  A drive dropped out of my raid 5 array yesterday. It looks like the reason was due to a bad controller so I switched it out and attempted to re-add the drive but mdadm claimed it couldn't do it. So I zerod the superblock and just added the drive normally and left it to resync. When I came to check on the array this morning I was unable to mount it at all and it's now showing as CLEAN FAULTY with two drives missing. The two missing drives are listed as spare and faulty spare. Is there anything I can do in this situation or is the array gone?

  Read the article

• How do I open a file with a program via a shortcut from the cmd prompt

  - by PassByReference0

  Here's my predicament: When I add a program's location to my PATH, I can do the following in cmd prompt to open a file in my current directory: notepad++ open_me.txt And this opens open_me.txt in notepad++. However, I don't want to have to add every single program I want to run to my path. What I want is to add a folder called C:\Users\Me\Documents\Programs to my path and just drop shortcuts to various programs into that folder and have them function the same as adding them to my path. So I dropped a link to notepad++.exe named "np" in my folder, and what I got was this: I have to run it with start np (instead of just np) But more importantly, if I try start np open_me.txt, it opens notepad++.exe but looks for open_me.txt in notepad++'s directory. How can I do this properly? (Also, I'd like to be opening notepad++.exe with the shortened name of np)

  Read the article

• Does a bad Internet connection increase bandwidth usage?

  - by Synetech

  My (Rogers) cable connection has been pretty bad recently (channels 3 and 10 are particularly fuzzy—it’s analog, not digital cable). Not surprisingly, this has caused my cable modem to drop out and have to reestablish a connection a couple of times since it started. The poor connection of course means higher corruption (not necessarily dropped per se) which causes the TCP/IP stack to have to retransmit packets more often. Reduction of bandwidth throughput aside, I got to wondering if it increases the actual bandwidth usage. That is, if there is a high error rate on the line causing packets to have to be retransmitted: Does this increase a bandwidth monitoring program’s numbers? Does the ISP count the retransmitted packets toward the monthly cap? Based on what I remember from my university networking courses and common sense, I have a feeling that the answer to both questions is yes, but I cannot reliably measure the first, and have no authoritative answer for the second. I’m wondering if maybe the retransmitted packets are acknowledged as being duplicates and thus not counted somewhere along the line.

  Read the article

• Laptop connecting to Wifi but not to internet

  - by eddard stark

  My friends laptop is able to connect to the wifi router . Typing 192.168.1.1 in the browser shows the login page for the router . But he cannot connect to the internet. This is true on both windows and linux (dual booting setup) . There are 3 other laptops connecting to the internet via wifi just fine and his was fine too until this happened all of a sudden . I tried doing a tracert from windows to an external ip . The first hop to the modem is fine but then the packets seem to be getting dropped . If his wifi adapter is damaged how is it connecting to the modem via wifi . I havent asked a question here before but this is really weird . If anyone needs any more information I shall post it here.

  Read the article

• Configure SMTP server windows

  - by Jake

  I am configuring a local network and for some reason I can't get server to send an email. I already install the SMTP server and configured using this tutorial http://www.itsolutionskb.com/2008/11/installing-and-configuring-windows-server-2008-smtp-server/ but when I try to send an email using code, the email gets pickedup from mailroot/pickup and dropped in mailroot/queue and stays in queue forever, it never goes anywhere, I even tried dropping a basic mail.txt file with this in it: to:[email protected] from:[email protected] subject:This is a test. this is a test. still the same thing happens. Is the smtp server not configured right, is their something else I am missing, because this is my first time setting up an smtp server

  Read the article

• Is there still a place for tape storage?

  - by Jon Ericson

  We've backed up our data on LTO tapes for years and it's a real comfort to know we have everything on tape. A sister project and one of our data providers have both moved to 100% disk storage because the cost of disk has dropped so much. When we propose systems to potential customers these days we tend to downplay or not mention our use of tape systems for data storage since it might seem outdated. I feel more comfortable with having data saved in two separate formats: disks and tape. In addition, once data is securely written to tape, I feel (perhaps naively) that it's been permanently saved. Not having to rely on a RAID controller to be able to read back data is another plus for me. Do you see a place for tape backup these days?

  Read the article

• How can I throttle the bandwidth consumed by Windows Automatic Updates?

  - by eleven81

  We have many Windows XP computers sharing one connection to the internet. These machines are set to download all available automatic updates and then prompt the user to install them. Whenever Patch Tuesday rolls around, our internet usage pegs out, and remains that way for most of the day, and sometimes into the following Wednesday. This hurts! I still want the machines to start to download the updates as soon as they are available, but if it takes until Thursday or Friday before the last updates are downloaded, that's still better than the latency and dropped connections we are seeing now as a result of the internet connection bottleneck. What can I do to throttle back how rapidly each machine downloads the updates, while still having them all start the download process as soon as the updates are available? I have no desire to run a WSUS server. Also, the internet connection is more than enough, whenever there are no updates to download.

  Read the article

• google video chat works faster on local LAN

  - by bashrc

  Recently the internet speed on our college LAN has dropped drastically. ( Avg file download speed 13 Kbps :( ). However g-talk's video chat remains unbelievably fluent when done with someone within the college's LAN. However video chat is practically impossible for anyone else who is not in the college network. My college has a proxy server through which all computers inside the college connect to the internet. I suspect its due to the proxy server. Also how g-talk maintains video chat? Is it something in the mechanism that speeds up video chat between two clients with the same IP? Since all computers use the same proxy,their IP would appear to be the same to google server.

  Read the article

• Wireless dropouts that only affect subset of devices

  - by jwaddell

  When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

  Read the article

• Finding spoofed IP address on network

  - by Jared

  I have a few IP spoof dropped messages coming out of my Sonicwall firewall, we'll call them Source A and Source B. Both of these sources have the same mac address indicating they're coming from the layer 3 switch behind my firewall. Source A has an ip within a valid subnet on my network and it shows up in the ARP table of my layer 3 switch. I was able to trace the exact location and fix the issue. Source B's ip however, is not within valid subnet on my network and it's not showing up in my layer 3 switches arp table. Any idea how I can trace the location of this device within my network? Thanks in advance.

  Read the article

• How can I get data off of a damaged thumb drive?

  - by Lord Torgamus

  A guy I work with just came by to ask me about a damaged thumb drive/USB flash drive. Apparently his son dropped it on a hard surface and it won't power up anymore. They've tried plugging it into multiple machines without success, even though each port they tried was able to power other USB devices. He knows it's not a lost cause because a local tech store is offering to recover the data for $500, but he says they're not worth that much. I figured someone on SU would have an idea about this; he doesn't care about using the drive in the future, just wants to salvage a few files that would be a pain to recreate. Is this possible without advanced equipment, and if so, how? He said he already tried the advice on the Internet about typing in different drive letters and such, but that failed because there was no power going to the drive. He also said that he opened the case up at one point, but I'm not sure what, if anything, he did inside.

  Read the article

• Any way to stop VMWare workstation from dropping SSH connections?

  - by oljones

  I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

  Read the article

• Windows XP/Firewall -- Can't open UDP port 9100 for JetDirect sharing

  - by Barton Chittenden

  I'm setting up my Dad's laptop (Vista) to print to an HP Deskjet printer attached to a Windows XP Desktop box. The XP box is running Windows firewall. Laptop sits on 192.168.1.66, Desktop 192.168.1.65. I set up logging in the firewall, and determined that it is dropping inbound packets on TCP port 9100, used by JetDirect, the printing protocol. I set up an exception on TCP port 9100, allowing access to the local subnet. There's also an entry under the 'allow applications' tab which was marked for the exact printer model. I selected this as well, then tried to print again... I see more dropped packets from 192.168.1.66 to 192.168.1.65 for TCP port 9100. What do I try next?

  Read the article

• How to backup metro "app" data, manually

  - by ihateapps

  I'm a PC tech and I have been getting more and more Windows 8 issues. First off I hate metro, and secondly I hate "apps". I like to do fresh installs of Windows8. I backup my user's data and then fresh install. Assuming there is no recovery partition how can I manually backup the user's app data so that in the event of a reformat I simply redownload their apps (dumb, I wish there was a way to actually back them up too) and plop the data back in. Do most normal people even use "apps", or do they use Windows8 like a desktop OS? I totally dropped metro with ClassicShell.

  Read the article

• Windows Server 2008 R2 - Can't connect RDP over the Internet

  - by Jonathan DeMarks

  I have two networks: Domain and Public, Domain is a VPN connection and Public is the local connection to the network. This is not a domain controller or a DNS/DHCP server. I can connect via RDP from the local network (192.168.1.), from the VPN network (10.1.2.), and from the VPN network over the internet. I cannot connect from the internet (anywhere besides where the server is VPN'd) Wireshark indicates that the server is getting packets, and the audit log is indicating that the packets are being dropped. Advanced Firewall has explicit options to allow RDP, and has no deny policies. I have also tried turning Firewall off completely to no avail. I'm really lost on this one.

  Read the article

• routing weirdness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router. edit: Facepalmishly, turning the firewall on my router on and off fixed it. I don't get why it dropped off at different ip addresses each time, or why the router set it self to block.. everything, or why it affected the ipv6 tunnel as well.

  Read the article

• Proccess of carrying out a BER Test

  - by data

  I am subscribed to an ISP supplying a 3meg ADSL line. Lately (for the last 4 weeks) speeds have dropped from the usual average downstream speed of ~250kbps to just 0.14Mbps (according to speedtest.net) and employees are complaining about lack of access to the server. I have been calling customer support and logging calls for the last 3 weeks, but they have been unable to determine the source of the problem other carrying out a few bitstream tests and checking the DHCP renewal times. I am going to call back and suggest carrying out a BER test. What type of equipment is needed to carry out this test? I have access to a wide range of Cisco networking equipment. Other: We dont need a leased line as there are less than ten employees.

  Read the article

• Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose? [migrated]

  - by Moshev

  I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

  Read the article

• wireless dropping out

  - by Sam

  My wireless network connection is dropping out and its driving me nuts. It is weird because it happens at totally random intervals and other devices work while my computer has been dropped. Both my USB dongle and wifi card randomly disconnect from the router and I am unable to connect for a couple of minutes. It is especially irritating because two different adapters are failing at the same time, sounds like a software problem to me, but where? Both my laptop and iPod remain connected when the connection drops. What on earth is happening? I doubt its the router because the other devices would disconnect as well.

  Read the article

• Is it possible to dump the names of all the open files in notepad++ to a file?

  - by mark

  So, I dragged and dropped multiple files onto notepad++. The files came from different directories and were selected using different criteria. So, I have many files open in Notepad++. Now I need to have a list of all the open files in another file. Right now, my only option is to script the decisions used to guide me in selecting the files in the first place. Which is probably the best in the long term, but I wonder if there is a quicky one in Notepad++. Some plugin magic or whatever. Suggesting another free editor which has this function is a good option too (not that I am going to ditch notepad++, God forbid)

  Read the article

• Laptop display not working unless DVI cable is plugged in

  - by marien

  I have a Lenovo ThinkPad T420 with an i5 processor and integrated graphics. I dropped the laptop and now the screen is not working. I replaced the screen and it is still not working. It shows the BIOS and then at Windows login the screen gets all static looking. But if I plug in a DVI-to-HDMI cable the laptop starts and works fine. Even the external display works and the laptop display works too. As soon as I unplug the cable the screen crashes and is all static. I cannot figure out the problem. The video works because the external screen still works. How can I fix this?

  Read the article

• General purpose ticketing/tech support system [closed]

  - by crazybyte

  Possible Duplicate: What’s your favorite ticketing system? I was wondering if somebody could recommend me a very user friendly or simple general purpose ticketing/tech support system. I need something that is web based, preferably open-sourced/free software implemented using PHP, Ruby, Ruby on Rails or Java (as back end) with MySQL or PostgreSQL as database engine. I need something that is not development management oriented or project management oriented like Eventum or similar (random example), something to which the user can connect open a tech support request and be able to follow it until is solved or dropped.I need it to be open-sourced to be able to modify it if there is a need or extend it. I tried a number of such systems available and I found that osTicket or eTicket is something that it's close to what I need, but the code is somewhat flaky and some of the features are working badly or behaving strangely. Any thoughts/advice where to find something similar? Thanks!

  Read the article

• Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose?

  - by Moshev

  I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

  Read the article

• Server freeze restarted quickly so how do I fiond what went wrong?

  - by Charlie

  I have a SQL SERVER DB running on a windows server 2008 (VMWare) Yesterday I could not RDP to it so I ended some RDP sessions which were left logged in. This seemed to solve the problem. However last night I learned that the DB was inaccessible and unresponsive to customers. My colleague checked the server but again is unable to create an RDP connection. He then restarted the server and since it has been fine. Looking at the CPU Readings of the Server it spiked up to 100% before the original RDP problem .After I ended the extra seeions uit again dropped down to normal levels however before the time of the customer complaint it had rose to 100% again - before it had to be restarted. Is there anyway I can investigate which processes may have caused the problem in the first place. Would there be some kind of memory dump from when it was restarted. I would prefer to find out what is wrong now instead of waiting until it happens again.

  Read the article

• Outlook keeps forgetting safe sender domains and ignoring contacts

  - by Jivlain

  I get a large number of quite similar emails from a particular address, most of which Outlook 2010 identifies as spam. None of these are actually spam. I have Outlook's junk email proection set to Low, and have told it to trust email from my contacts. I have added the address to my list of safe senders, and I have also tried adding it to my contacts. However: it keeps dropping the address from my safe senders list - I add it, it stays there for a while, but eventually I'll have a legitimate mail identified as spam, and the address will have been dropped from the list. Meanwhile, despite adding that sender to my contacts, it is still classifying their mail as junk. Any ideas of how to fix this?

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >