Search Results

Search found 25400 results on 1016 pages for 'enable manual correct'.

Page 29/1016 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36 | Next Page >

Gvim displays wrong font when set from _gvimrc, but correct font when set from menus

- by dggoldst

This question applies to gVim running on Windows. I have the following line in my _gvimrc set guifont=Lucida_Sans_Typewriter:h11:cANSI When gVim starts up, it strange italicizes everything! A call to :set guifont shows that things seem to have been set correctly, as it returns guifont=Lucida_Sans_Typewriter:h11:cANSI Then I manually select Edit-Select Font ... and then choose Lucida Sans Typewriter, and font size 11 and submit, the italics disappear and it looks fine. I've posted my _gvimrc for reference at http://vim.pastey.net/132157 So my questions are: Why am I getting different results from setting it manually and from _gvimrc? Is there a way to capture the command that the dialog box is sending back to the program? It might include extra commands that I'm missing.

Read the article
Enable CPU fan always on

- by Gundars Meness

I am using 3 years old overheating laptop and I want my CPU fan to be spinning 24/7 regardless of the consequences. How to make it spin? The problem is that CPU & GPU heats up to 68°C (154 F) right after boot and never goes down, because CPU fan is not spinning full throttle. It starts spinning faster when temperature goes over 70°C and stops when it reaches seventy again. When doing heavy work on databases, it gets from 70 to 90 in no-time and automatically powers off. Bios does not contain any "fan spin 100%" options, just "spin slowly all the time" and "auto" which is more useless than the first one since my fan doesn't have pwm wire. Currently I'm solving this with cooling stand (3x5V), but it isn't much of a help. I would rather use the CPU fan since it is the only fan directly responsible for cooling down CPU/GPU. But how to make it spin 100% all the time? Should I attach it's red power wire to motherboard to get constant 5V (is there such option?), or is there an option to control it via software? Laptop: Samsung R528 2.3 GHz Intel i3 with Nvidia GeForce 310M Bios: Phoenix 03KT.M003.20100622.KSJ (and that is latest update) OS: Ubuntu 12.04.2 LTS with 3.2.0.51 kernel CPU fan: Image/Description Has 5V 0,4A and only 3 pins, no pwm. P.S. Yes, I did clean everything with alcohol, freed the air vents, changed thermal paste etc; that reduced temperature by 4 degrees.

Read the article
How do I reinstall/enable snapper?

- by Aaron Digulla

I had errors in my root filesystem (btrfs) so I recreated it from a backup but now, snapper doesn't work anymore: # /usr/bin/snapper -v -v -v -v create --description test IO Error. # snapper -v delete-config Deleting config failed (deleting snapshot failed). # snapper create-config / Creating config failed (subvolume already covered). # snapper -c root create-config / Creating config failed (subvolume already covered). # snapper list Type | # | Pre # | Date | User | Cleanup | Description | Userdata -------+---+-------+------+------+---------+-------------+--------- single | 0 | | | root | | current | I also tries to reinstall/remove and install the package snapper but without any luck. Any ideas how I can make snapper work again? openSUSE 12.3 with kernel 3.7.10-1.1-desktop.

Read the article
Internet doesn't work when enable local Lan

- by rakesh yadav

We have the following network setup: A) Router IP 192.168.51.49 B) Windows Server 2008 R2 with dual NIC: B1) WAN interface (192.168.0.2) ( Used for internet) B2) LAN interface (192.168.1.2) ( used for local connectivity) when i keep both LAN Enabled than my internet doesn't work, but if I disabled my local Lan than internet working fine. so please help me how can resolved this issue or should i need to do routing on my server Please find the below attached route print result C:\Users\Administrator>route print =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.51.49 192.168.51.50 276 0.0.0.0 0.0.0.0 192.168.30.227 192.168.30.228 266 192.168.30.224 255.255.255.240 On-link 192.168.30.228 266 192.168.30.228 255.255.255.255 On-link 192.168.30.228 266 192.168.30.239 255.255.255.255 On-link 192.168.30.228 266 192.168.51.48 255.255.255.240 On-link 192.168.51.50 276 192.168.51.50 255.255.255.255 On-link 192.168.51.50 276 192.168.51.63 255.255.255.255 On-link 192.168.51.50 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 202.56.230.5 255.255.255.255 192.168.51.49 192.168.51.50 21 202.56.230.6 255.255.255.255 192.168.51.49 192.168.51.50 21 192.168.26.124 255.255.255.255 192.168.51.49 192.168.51.50 21 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.51.50 276 224.0.0.0 240.0.0.0 On-link 192.168.30.228 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.51.50 276 255.255.255.255 255.255.255.255 On-link 192.168.30.228 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.30.227 Default 0.0.0.0 0.0.0.0 192.168.51.49 Default ===========================================================================

Read the article
Ensure Mac's get correct machine name from DHCP?

- by Greg Whitfield

I have a problem in our network where our Mac's occasionally get given the wrong machine name while, I guess, getting a new DHCP lease. The DHCP servers are Windows based - the bulk of our network is Windows, but we have some Linux machines and an increasing number of Macs. The problem specifics is that occasionally a Mac will take on the name of another machine in the network. For example, I have a new Macbook Pro. In the OSX setup is gets called "gomez", and initially starts up on the network with that name without any problems. But after a few days when the machine was restarted (it had several restarts in the meantime), it ended up being called "florrie", which is actually the name of another machine in another part of the network. All network ops work fine, and indeed you don't notice most of the time - it's only when you run apps like Perforce that require the hostname that you get problems. I'm sorry I don't have more info than that, but if I know what to look for I can dig out some more facts. Or any hints on checking the network setup would be useful.

Read the article
Windows Swap (Page File): Enable or Disable?

- by d03boy

From my personal experience I've noticed that disabling the page file in Windows XP has given me, in general, the most speed gain out of any other software change I can make. Obviously this has to be done when a significant amount of RAM is available. Typically I find that it works nicely with +2GB of RAM. The only issues I've ever really had were loading up Adobe Photoshop. Is this really a speed improvement or am I imagining it? Note: In order to actually turn it off, you must not just set it to 0MB, but disable it. Otherwise Windows will just expand it when it needs to in order to meet its needs.

Read the article
How to enable an external USD harddrive with ubuntu

- by LarsOn

Hello I'm trying to install a new LaCie Hard Disk design by Neil Poulton 1TB USB 2.0 GParted reports /dev/sda1 (with exclamation mark and key sign) ntfs 1 KiB unallocated 320 MiB /dev/sda2 hfs+ 2.84 MiB unallocated 931.2 GiB When trying to create a partition with Disk Utility it says Daemon is inhibited It seems I can't create the partition that way. Can you recommend how I can proceed? Thank you

Read the article
Linux: shortname stuck as "localhost" even though full hostname is correct

- by DrStalker

I have a linux (CentOS 5.2) server with the name myserver.mycompnay.com, which is correctly returned when I run 'hostname'. When I run 'hostname -s' however it returns "localhost" which is causing some backup scripts to put stuff in a "localhost" directory instead of a "myserver" directory. All of our other CentOS boxes correctly return the first part of their hostname when 'hostname -s', where do I go on this server to make it behave the same? Other than having "HOSTNAME=myserver.mycompnay.com" in /etc/sysconfig/network what should I be looking at?

Read the article
Enable FTP on OS X 10.8 Mountain Lion Server

- by Oleg Trakhman

There is a LAN comprising several mac machines (iMac, Mac Pro, macbook etc.), Airport Express router and Mac Mini Server running OS X Server 10.8 (Mountain Lion Server). I need to share a folder on Mac Mini Server by FTP. What did I try so far: Made special partition for FTP Access, call it "Reports" So shared folder would be "/Volumes/Reports" Gave access every user and group in system, and also enabled guest access. I checked posix acl, which is "rwxrwxrwx", I checked sharing settings in "Preferences.app" and "Server.app" Checked that users have access to FTP service Enabled FTP in Server.app I tried access to shared folder (by FTP): via Cyberduck via Finder via shell: ftp server.local And what I got: $ ftp [email protected] Trying 10.0.2.2... Connected to server.local. 220 10.0.2.2 FTP server (tnftpd 20100324+GSSAPI) ready. 331 User ftpuser accepted, provide password. Password: 530 User ftpuser may not use FTP. and $ ftp [email protected] Trying 10.0.2.2... Connected to server.local. 220 10.0.2.2 FTP server (tnftpd 20100324+GSSAPI) ready. 331 User admin accepted, provide password. Password: 530 User admin denied by SACL. ftp: Login failed ftp> (admin is administrator account , ftpuser is special user account made to access ftp) What I'm doing wrong? Getting really tired of this...

Read the article
How to enable extended logging for classic asp on IIS7 on Windows 2008 R2

- by Neil Trodden

I had to deploy an application that was not written by me onto the above configuration. It is a rather bizarre hybrid of asp.net and classic asp and it's the classic asp that is proving troublesome. The client is having problems with 500 Internal Server Errors appearing and I can see some of these in the logs but I only get the error code and the page name but little else. What I would like to see is the actual error message to at least give me an idea what is going on (or not going on, depending on your point of view) I don't want to display errors in the browser as I don't know the code well enough and this could (for all I know) display some crazy code where the db password is hard-coded into the site.

Read the article
apache2 mod_rewrite enable, but not working

- by user611478

I have enabled mod_rewrite on my server and confirmed it using phpinfo() and it shows as enabled. I have the following in my httpd.conf file: ServerName 172.16.1.114 RewriteEngine on RewriteRule ^/test$ /index.php I've tried the rewrite rule on another server and it works as expected. No errors are thrown to my apache error log and it restarts cleanly. When I try the page it 404s and doesn't load index.php I'm sure this must be a simple problem, but I am at a loss on how to figure it out. Any help is appreciated.

Read the article
Getting Correct Edition of Office 2007 from Serial Key

- by Lloyd Sparkes

I have been asked by a Client to refresh one of their Machines. To do this i managed to get Windows XP Setup to run in Repair mode, and while in setup i ran a serial key grabber, which grabbed the key for Office 2007 The only thing is that the key grabber didnt tell me what edition of Office 2007 was installed. I have aqquired a number of ISO's for the different editions (Home & Student, Standard, Professional, Ultimate) but the key doesnt work in any of them. Is there a way to get the edition from the Serial Key, or is there a generic ISO that will install any edition depending on the Serial Key?

Read the article
Chrome not selecting correct language for Help tab

- by Andy

When I click Help in Chrome, a new tab appears with the Google help links etc as expected, but I have a message saying: "This Help Centre is not currently available in your language...", etc. The drop down box at the bottom is not selected correctly for en-GB (my location). Instead it is set at the first language on the list. This happens if I am signed in to my Google account or not. Selecting English from the drop-down works ok, so no great drama. Just wondering if anybody else sees this behaviour? EDIT: Using current stable build 8.0.552.224

Read the article
How to enable caching on Apache / Ubuntu Linux?

- by Jim Mischel

I have a large (several megabytes) XML file that's updated rather frequently (every 10 minutes or less) and gets a lot of traffic. I'd like to implement some caching to reduce bandwidth and server load. Looking at the Apache documents, I see a dizzying array of configuration options that involve various combinations of mod_expires, mod_headers, and mod_cache (and variants). I end up running in circles and the results aren't what I expect. I'm comfortable editing the various configuration files if I have some idea what I'm supposed to change. But at the moment I'm poking around in the dark and that's never a comfortable feeling. So, perhaps if I describe what I want, somebody here can take me by the hand and say, "This is what you need to do." Periodically, this file, call it "stuff.xml" is updated and a new version copied to the directory. The external url would be, for example, http://example.com/stuff.xml. Understand, this part works. Whenever I request the file, I get the expected result. But the file is big and I want to save bandwidth, so first I'd like to implement conditional GET semantics with the If-Modified-Since header. How do I do this? I've enabled mod_headers and mod_expired and added the <FilesMatching> section in my httpd.conf as recommended in countless examples I've seen online, but that didn't change the behavior when made a conditional GET request. I always get a status 200 with the entire document. So how the heck do I implement this? That'll cut down on neeless transfers. I'd also like to limit the amount of data transferred. Seeing as this is XML, gzipping it should save me 50% or more. My next step would be to somehow gzip the file and, if it's not too difficult, store it in memory. That'll cut down on per-access data transfer, and also reduce disk transfers. So how do I implement this type of caching? Thanks in advance.

Read the article
Enable Remote Desktop File Transfer

- by Eric J.

Most of the servers I RDP to support cut-and-paste file transfer (from my Win7 64 machine). One does not, and I can't figure out what configuration step is missing. I followed the steps outlined here: http://support.microsoft.com/kb/313292 but do not see the local file system on the remote server (or vice versa for that matter), and I cannot cut and paste files from the local to the remote system. If I try to cut and paste from the remote system to the local one, I get the error Cannot copy FILENAME: Windows cannot find '%1!ls!'. Check the spelling and try again, or try searching for the item by clicking the Start button and then clicking Search. The remote server is Windows Server 2003 Standard Edition.

Read the article
How to Enable an External USB Hard Drive with Ubuntu

- by LarsOn

I'm trying to install a new LaCie Hard Disk design by Neil Poulton 1TB USB 2.0. GParted reports /dev/sda1 (with exclamation mark and key sign) ntfs 1 KiB unallocated 320 MiB /dev/sda2 hfs+ 2.84 MiB unallocated 931.2 GiB When trying to create a partition with Disk Utility it says Daemon is inhibited It seems I can't create the partition that way. Can you recommend how I can proceed? Thank you

Read the article
NIC are not advertising Correct Speeds

- by Squidly

I have an IBM x336 that is not advertising the proper LINK speeds. One interface is the other is not. I've tried to Force it to 1000/Full but then it just shows link down. I have confirmed the switch is set to auto negotiate like my switches. I have also changed out my Ethernet Cables. I'm at a loss where to look further. I have verified that it will connect at 1G on a different swtich. This also has happened on two different servers on the same switch. This is my output from mii-tool -v for each interface. eth0: negotiated 100baseTx-FD, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD eth1: negotiated 1000baseT-FD flow-control, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

Read the article
Midnight Commander: how to enable find-as-you-type behavior

- by wuser

Ok, I just need Total Commander 'quick search' feature.

Read the article
Can't seem to install the correct version of PHP, using apt-get install

- by Mark Tomlin

I'm using Ubuntu 11.04 LTS server, it's a new install on a VPS box from MediaTemple (their ve server). I'm trying to install PHP 5.4.3 on this box, but I'm having a common problem not matter what version I get. I'm trying to get the php-cgi process, so I do the command apt-get install php-cgi and that installs, but does not provide me with the php-cgi executable. I need this so that I can run php-cgi -b 127.0.0.1:9000 and have it has a FastCGI process for my nginx install. Any idea what I can do to get this to work, bonus points if you can get this to work with PHP 5.4.3, because all I can seem to install is PHP 5.3.5.

Read the article
How do I enable TUN/TAP forwarding?

- by rafal

I have a program which writes packets (destination address 10.3.0.2) to the TUN/TAP interface. Network: host1|tun0----eth1(10.3.0.1)|-------------------host2|eth1(10.3.0.2)| Wireshark captures these packets from interface tun0 but they are not forwarded to interface eth1. Commands: sysctl -w net.ipv4.ip_forward=1 sysctl -p iptables -A INPUT -i tun+ -j ACCEPT iptables -A FORWARD -i tun+ -j ACCEPT iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT /etc/init.d/networking restart /etc/init.d/openvpn restart

Read the article
how to enable mac like task bar in Windows 7

- by Reddy

I have recently got a laptop with windows 7 installed and it is showing normal task bar at bottom and one taskbar with glass like background (I think I seen similar one in either mac or ubuntu) which have the icons for accessing internet, email, mediaplayer. But after sometime it suddenly disappeared and I don't know how to get it back? I don't even know what it is called ;( Can anybody please help?

Read the article
Correct way of bringing network interface down in linux

- by Karolis T.

For example: $ ifconfig dummy0 up $ ifconfig dummy0 "192.168.1.190 netmask 255.255.255.0" Calling ifconfig with no parameters shows the interface dummy0 Link encap:Ethernet HWaddr b6:1f:f3:92:6d:20 inet addr:192.168.1.190 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::b41f:f3ff:fe92:6d20/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:1050 (1.0 KiB) How can I bring the interface down so that it doesn't show up in ifconfig ifconfig -a ifconfig dummy0 without rmmod dummy because dummy is used just for example purposes. If there is no way to do that, what "throw-away" IP could I set to it and be safe from any trouble? like $ ifconfig dummy0 down $ ifconfig dummy0 0.0.0.0

Read the article
Enable user registration - eJabberd

- by travega

I am a complete n00b to configuring Jabber/XMPP servers and I am hoping to get some help getting set up. I have done all of this and installed pidgin. I seem to be able set up my "admin-user" in pidgin no problem but when I try to register a new user I get a 403 Fobidden message back from pidgin. Do I need to change the ejabberd.cfg file to allow users to register? If so how do I go about it? If not what do I need to get basic chat and fileshare going?

Read the article
enable offline files for all users home drives via Group policy or other

- by JohnyV

I am trying to get all users of particular notebooks to make the users h drive offline. i know you can do it manually but is there a way to set this value somewhere so that users dont have to do it themselves? I am running 2008r2 domain controllers and windows 7 clients. I have folder redirection enabled but i want to make the users h: available to them when they are offline. I know the group policies are located in the computer configurationPoliciesadministrative templatesNetwork but there doesnt seem to be any place to select which folders/drives will be offline files without a users input. Even if there is another method not through GP. Thanks

Read the article
have ffmpeg scan and report correct time

- by acidzombie24

I am encoding a section of a song. I used -ss offset -t 30 (duration). When i use -i file.acc i see it says the audio is 31, 32 and once 36 seconds long. Opening it in vlc showed it as 30sec after a few seconds of playback. My code needs to filter sounds more then 30 seconds. I can fudge it and allow 30.99 (maybe 20.48 is better) however 2 seconds too long is not good and i would need to filter this out even though playback is 30seconds long. How do i get ffmpeg to scan the file and report an accurate time?

Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36 | Next Page >