Search Results

Search found 3817 results on 153 pages for 'extjs direct'.

Page 29/153 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36 | Next Page >

MultiPath configuration on RHEL5 and Clariion CX-300

- by Kamil Z

I have problem with discovering my FC-connected CX-300 storage. Frankly speaking I'm complete novice in FibreChannel, so step by step explanation would be appreciated. My configuration consist of two IBM HS20 blades with RHEL5.4 on board and 2x Qlogic ISP2422-based 4Gb Fibre Channel HBAs on each blade. As a FC switch there are two Brocades built in BladeCenter Chassis, and finally there is EMC Clariion CX-300. CX300, and Brocade switches should be configured properly, because they were working fine with previous configuration, which main defference was RHEL3 instead RHEL5.4 Below there is my output from several usefull commands: #lspci | grep Fibre 06:01.0 FibreChannle: Qlogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X HBA (rev 02) 06:01.1 FibreChannle: Qlogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X HBA (rev 02) #lsmod | grep qla qla2xxx 1084741 0 scsi_transport_fc 37577 1 qla2xxx scsi_mod 141717 10 scsi_dh,qla2xxx,sg,scsi_transport_fc,usb_storage,libata,mptspi,mptscsih,scsi_transport_spi,sd_mod #cat /proc/scsi/scsi Attached Devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: LSILOGIC Model: 1030 IM IM Rev: 1000 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 01 Id: 00 Lun: 00 Vendor: IBM-ESXS Model: ST936701LC FN Rev: B418 Type: Direct-Access ANSI SCSI revision: 04 Host: scsi0 Channel: 01 Id: 00 Lun: 00 Vendor: IBM-ESXS Model: ST936701LC FN Rev: B418 Type: Direct-Access ANSI SCSI revision: 04 I'd followed instructions from this site (editing /etc/multipath.conf), but i failed after multipath -ll - the output was empty. Do you have any suggestions about discovering FC Connected LUNs in such configuration?

Read the article
Windows 8 Internet Explorer proxy automation script

- by Stefan Bollmann

Similar to this post, I'd like to change my proxy settings using a script. However, it fails. When I am behind the proxy, IE does not connect to the internet. Here I try the first solution from craig: function FindProxyForURL(url, host) { if (isInNet(myIpAddress(), "myactualip", "myactualsubnetip")) return "PROXY proxyasshowninpicture:portihavetouseforthisproxy_see_picture"; else return "DIRECT"; } Also this test, where isInNet should surely return true does not help: function FindProxyForURL(url, host) { if (isInNet("myactualip", "myactualip", "myactualsubnetip")) return "PROXY proxyasshowninpicture:portihavetouseforthisproxy_see_picture"; else return "DIRECT"; } **This script is saved as proxy.pac in c:\windows and my configuration is* in LAN settings: No automatically detected settings, yes, use automatic config script: file://c:/windows/proxy.pac No proxy server. *(i am not allowed to post screenshots..) So, what am I doing wrong? ---------------- update -------------- However, when I set up a proxy in my LAN configurations: IE -> Internet Options -> Connections -> LAN Settings check: Use a proxy Server for your LAN Address: <a pingable proxy> Port: <portnr> everything is fine for this environment. Now I try a simpler script like function FindProxyForURL(url, host) { return "PROXY <pingable proxy>:<portnr>; DIRECT"; } With a configuration described above** I am not able to get through the proxy.

Read the article
virtual disk image - file or partition

- by tylerl

I'm looking at the differences between using a file versus a partition to store a virtual disk image in VM use. The common knowledge is that partition-based images are faster than file-based images because of a decreased overhead. It makes sense, but I've never seen any actual numbers. My own testing bears out a different result. When I benchmark a direct-to-partition virtual disk, then format that same partition with ext4, create a virtual disk image stored on that ext4 filesystem, and then benchmark that, I see no speedup at all for the direct-to-partition virtual disk. Instead on some systems the file-based image is even faster (possibly due to host OS caching or something like that). This test was repeated many times on many systems, with fairly consistent results. So perhaps throwing out the performance justification, is it still considered better to use a partition rather than a virtual disk image? Is there some other reason why direct partition access is better than image files? Or perhaps is there some reason to go the other way around? Perhaps an advantage in one of the virtual disk file formats that you don't get with raw partition images?

Read the article
Wireless disconnects at random after upgrade to Ubuntu 10.4

- by Daniel Elessedil Kjeserud

After upgrading my home server from Ubuntu 8.10 to 10.4 my wireless seemingly drops out, even though my IRC client keeps it's connection to the servers, so it looks like the machine just stops taking wireless requests. A ping will give a me this Request timeout for icmp_seq 27 ping: sendto: Host is down After a while the machine just starts responding again, without any interaction from me. When the machine comes back, this is what dmesg gives me [ 18.296288] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.296350] wlan0: deauthenticating from 00:1b:63:22:a4:5f by local choice (reason=3) [ 18.296440] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.298697] wlan0: direct probe responded [ 18.298706] wlan0: authenticate with AP 00:1b:63:22:a4:5f (try 1) [ 18.306836] wlan0: authenticated [ 18.306886] wlan0: associate with AP 00:1b:63:22:a4:5f (try 1) [ 18.309396] wlan0: RX AssocResp from 00:1b:63:22:a4:5f (capab=0x411 status=0 aid=2) [ 18.309402] wlan0: associated [ 18.310187] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.447742] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 18.447748] apm: overridden by ACPI. [ 19.163282] padlock: VIA PadLock not detected. [ 28.352022] wlan0: no IPv6 routers present kjes@brin:~$ lspci 02:07.0 Network controller: RaLink RT2561/RT61 rev B 802.11g It's on a wireless network with WPA2, the machine worked without any problems on the same wireless network since Ubuntu 8.10 was the most resent version, and there have been no changes to my network recently. Even though the server drops out, everything else on the network keeps working like normal.

Read the article
internet-based sync software that will keep running after Windows Live Sync stops doing PC-to-PC-syncs?

- by Warren P

According to the wikipedia page, Microsoft Live Sync will shortly stop offering the PC-to-PC sync service. There are lots of apps to sync two PCs on the same LAN, but I want to sync two PCs that are in different cities, across the internet, traversing two different NATs, and that requires some kind of service running in the internet that both connect into. There is already a few questions about syncing folders and files, but this is not a duplicate because none of them answer this basic question: Microsoft Live Sync works better than RSYNC, or any of the linked SYNC solutions in any of the "not really duplicates" because it works even when the two PCs have NAT and firewalls between them that forbid direct connectivity, because Windows Live Sync has a free always-on internet server that all the client PCs connect into. I'm looking for a FREE (no-fees) Microsoft Live Sync work-alike PC-to-PC sync solution that works between PCs and Macs, at least, as well as between PCs, and works behind NAT and firewalls at least as well as Microsoft's solution. (Note that Microsoft's solution makes only outbound socket calls to a microsoft server, so this solution must necessarily include a server-hub component that is hosted publically on a free site and which does not require that I set up and manage and pay for my own public internet hosting site) Hint: None of the answers in the linked duplicate are equivalent (PureSync,FreeFileSync,BestSync 2010,SyncButler,Comodo BackUp,QuickShadow,Gbridge) in that none of them work for the PC to Mac situation, where firewalls and nats prevent direct connection, or else they require money to be paid. When Microsoft Live Sync / Live Mesh finally kills direct PC-to-PC mode, the limitation will be that you will have to pay for more than 25 GB of cloud service, and you can then only sync PC #1 to PC #2 if you first sync to the cloud, then down to other clients. I can currently sync 100 gb of data from one computer to another, only temporarily "moving the data" through Microsoft's data servers without using up my Skydrive storage quota.

Read the article
Domain Controller DNS Best Practice/Practical Considerations for Domain Controllers in Child Domains

- by joeqwerty

I'm setting up several child domains in an existing Active Directory forest and I'm looking for some conventional wisdom/best practice guidance for configuring both DNS client settings on the child domain controllers and for the DNS zone replication scope. Assuming a single domain controller in each domain and assuming that each DC is also the DNS server for the domain (for simplicity's sake) should the child domain controller point to itself for DNS only or should it point to some combination (primary VS. secondary) of itself and the DNS server in the parent or root domain? If a parentchildgrandchild domain hierarchy exists (with a contiguous DNS namespace) how should DNS be configured on the grandchild DC? Regarding the DNS zone replication scope, if storing each domain's DNS zone on all DNS servers in the domain then I'm assuming a DNS delegation from the parent to the child needs to exist and that a forwarder from the child to the parent needs to exist. With a parentchildgrandchild domain hierarchy then does each child forward to the direct parent for the direct parent's zone or to the root zone? Does the delegation occur at the direct parent zone or from the root zone? If storing all DNS zones on all DNS servers in the forest does it make the above questions regarding the replication scope moot? Does the replication scope have some bearing on the DNS client settings on each DC?

Read the article
Windows 8 folder to folder sync software

- by Danny

I'm looking for direct folder to folder synchronization in Windows 8. I was previously using Live Mesh to accomplish this, but now it looks like that is no longer an option. Note that I'm talking about direct folder to folder sync between different computers, not syncing to the cloud. I'm aware of products like Google Drive, SkyDrive, Dropbox, etc. The problem with them is the space limitation. Basically, I was syncing important files before between my desktop and all of my laptops. One folder for example is My Pictures. This folder has almost 40 gigs of files, which is why the options listed above are not going to work for me. Just need direct syncing, nothing stored on the cloud. I was told by a Microsoft employee that SkyDrive would be replacing Mesh and would provide all the same functionality. So far this looks to be completely false, since the ability to remote desktop is gone along with folder to folder sync. Unless I'm just missing something?

Read the article
Problems with 5.1 digital out on Ubuntu 12.04

- by user895319

I've recently bought a new PC, installed Ubuntu and am now unable to get 5.1 digital sound working. Simple analogue stereo works fine on both the front and rear connectors. On my old box I connected the coax connection from my soundcard to my surround sound amplifier, set Settings-Sound to "Digital Stereo Duplex" and it worked. My old soundcard doesn't fit in my new machine so I'm using the built-in sound hardware. I'm connecting the combination output socket on the back of the PC via the same cable to my surround amp as before. The MB is an MSI Global H61M-P31 with an RealTek ALC887 sound chip. When I go to Settings-Sound I only see "Headphone Built-in Audio" and "Analogue Output Built-in Audio" - no digitial options. The output from aplay -l is: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC887-VD Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Hardware device with all software conversions While googling for ALC887 I've seen some references to "ALC887 -VD Analog" and some to "ALC887 -VD Digital". Does anyone know if I need to force it to chance mode somehow? It's worth mentioning that when I set the output to 5.1 digital surround in Windows 7 on the same machine I still don't get any sound so it's not a unique Linux problem. Thanks for any help.

Read the article
nginx redirect what is not coming from load balancing

- by dawez

I have nginx on SERVER1 that is acting as load balancing between SERVER1 and SERVER2 in SERVER1 I have the upstreams for the load balancing defined as : upstream de.server.com { # similar upstreams defined also for other languages # SELF SERVER1 server 127.0.0.1:8082 weight=3 max_fails=3 fail_timeout=2; # other SERVER2 server otherserverip:8082 max_fails=3 fail_timeout=2; } The load balancing config on SERVER1 is this one: server { listen 80; server_name ~^(?<LANG>de|es|fr)\.server\.com; location / { proxy_pass http://$LANG.server.com; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; # trying to pass a variable in the header to SERVER2 proxy_set_header Is-From-Load-Balancer 1; } } Then in server 2 I have: server { listen 8082; server_name localhost; root /var/www/server.com/public; # test output values add_header testloadbalancer $http_is_from_load_balancer; add_header testloadbalancer2 not_load_bal; ## other stuff here to process the request } I can see the "testloadbalancer" in the response header is set to 1 when the request is coming from the load balancing, it is not present when from a direct access: SERVER2:8082 . I would like to bounce back to the SERVER1 all the direct requests that are sent to SERVER2, but keep the ones from the load balancing. So this should forbid direct access to SERVER2:8082 and redirect to SERVER1:80 .

Read the article
CodePlex Daily Summary for Wednesday, February 24, 2010

CodePlex Daily Summary for Wednesday, February 24, 2010New ProjectsADO.Net DataSets to ExtJs.data.Store: A JavaScript (and C#) based project to reduce the amount of client-side code necessary to consume ADO.Net / ASP.Net web services when using ExtJS.AMP.Net Wrapper: AMP is a platform to build on-line marketplaces (http://www.poweredbyamp.com). AMP.Net provided Object-Like interaction with AMP's restful service...ArkSwitch: ArkSwitch is an easy to use, finger-friendly task manager for Windows Mobile 6.5.3 (with a WM6.5 compatibility mode). It is developed mainly in C#,...Biffen: Cinema-booking project in Computer Science at University College Nordjylland, Denmark.Braintree Client Library: Client library for integrating with the Braintree Gateway.Business Framework: A framework which helps building business applications. It provides business rules, validation rules and a text-based language for writing rules. I...Camp Araminta: This project will be used to coordinate development efforts on the Camp Araminta website.ChoServiceHost: Simple and easy way to create and host Windows Service Applications in .NET 3.5/Visual Studio 2008Delta College Game Development Project: Project site for cs 16 game development classDotNetNuke® Labs: DotNetNuke Labs is a collection of "research & development" type projects for the DotNetNuke platform.Generic web part for hosting Silverlight content on SharePoint sites (WSS,MOSS): This is a generic web part for hosting Silverlight content on WSS 30 and MOSS 2007 sites. The objective of this web part was to make it easy for us...GpTiming: GpTiming is a simple "lab" application related to race events, based on a Domain Model.HTML Forms in Windows Forms: As the names suggests this code library is designed to introduce HTML code (primarily form code) into Windows Forms. It was created because standar...imgur uploader - .net open source uploader for image sharing site imgur: Imgur uploader strives to be an easy to use uploader for images you would like to share with friends and family. It is written in c#.kuuy static system: kuuy static system is a full static publish website system!LaTeX Grapher: The goal of this project is to make a tool that facilitates making high quality two dimensional vector graphic function plots with a minimal amount...LightREST: A .NET library to consume REST-based HTTP services.Machiavelli: Machiavelli is Stackoverflow inspired project that I am working on following Andrew Siemer's article on DotNetSlackers. Mover: Mover makes it easier for developers to create programmatic animations in Silverlight. It provides an expressive API to the platform's underlying S...MVC Presenter: ASP.NET MVC 2で作るプレゼンビューアーnHibernate Attribute mapping: How to use Attibute mapping with a ManyToMany Relationship with nHibernateNIPO Data Processing Component Framework: NIPO is a general purpose component framework for data processing applications (that follow the IPO-principle). Its plugin-based architecture makes...PowerShell Remote File Explorer: This project intends to develop a Windows forms based file explorer to browse/transfer files over PowerShell 2.0 remoting channel. The file transfe...Process Flow Tracking of Biomass Distribution Project (University of Mumbai): At Larsen & Toubro Infotech India Ltd., my team worked on a SCM (Supply Chain Management) based project titled 'Process Flow Tracking of Biomass Di...VS2010 Rc1 Fix: Illustrates a fix for working with the ASAP.NET Wizard control with VS2010 RC1Yicker: a microblog program devolep by c#.New ReleasesADO.Net DataSets to ExtJs.data.Store: Ext.net: This is the first version of Ext.net. This version contains a single class, Ext.net.Store which extends the Ext.data.Store class to consume ADO.Ne...AMP.Net Wrapper: AMP.Net v1.0: Provides abstraction for all the product search functionality offered by AMP.ArkSwitch: ArkSwitch legacy versions: Old versions - no need to download themArkSwitch: ArkSwitch v1.1.0: ArkSwitch v1.1.0Braintree Client Library: Braintree 1.0.0: Braintree .NET client library 1.0.0Business Framework: BusinessFramework preview: Early preview bits. See Rules for a sample.Business Framework: Samples: SamplesCC.Votd: CC.Votd 1.0.10.224: This is the initial release of CC.Votd. Marking as beta since I'm the only one who has used it up to this point.ChoServiceHost: ChoServiceHost.msi: Easy way to develop Windows Service applications in .NET 3.5/VS.NET 2008. (Installer)ChoServiceHost: ChoServiceHost-Src.zip: Easy way to develop Windows Service applications in .NET 3.5/VS.NET 2008. (Source Files)CHS Extranet: Beta 2.4: Beta 2.4 Release: Change Log: Added HTML preview options for XLS, XLSX, DOCX File Changes: ~/MyComputer.aspx ~/mycomputer.css ~/basestyle.css...Composure: AvalonDock-55751-VS2010.NET4: This is a "convenience build" of AvalonDock (drop 55751) for VIsual Studio 2010 and .NET 4.0. Nothing has been altered in the source code (which ...Data Access Component: Version 2.6: Add LINQ support.Desktop Google Reader: 1.3 Beta 1: New features: Read it Later included (see http://readitlaterlist.com/) Liking added (working: see number of liking users, see if liking yourself,...Explorer Plus: Explorer Plus v0.3: Amazon Locales AddedFree Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts 3.0.3 Released: Hi, Today we have released the final version of Visifire v3.0.3 which contains the following major features: * DataBinding. * IndicatorEn...Generic web part for hosting Silverlight content on SharePoint sites (WSS,MOSS): CTP: The objective of this release was to gather feedback from the wider community. I intend to pursue further development and make fixes wherever appro...HTML Forms in Windows Forms: HTMLForms 1.0: First Release.imgur uploader - .net open source uploader for image sharing site imgur: Release 2010-02-23-01: This is the first codeplex release! Let mayhem commence...Jeremi Stadler: Stick Tops 2.5: Sticktops is a very light program that makes it easy to paste stuff on small notes on the screen. All notes you have is saved on a server so you ca...kuuy static system: kss_v1.0beta sql: kss_v1.0beta sql scripts sourceMDownloader: MDownloader-0.15.2.55998: Fixed detecting uploading.com dead links; Added hiding rss entries without files;Mover: MoverLib for Silverlight 3: A first version of MoverLib for Silverlight 3.nHibernate Attribute mapping: 1.0: Source CodenHibernate Attribute mapping: Download 1: Zip fileNodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Class Libraries, version 1.0.1.113: The NodeXL class libraries can be used to display network graphs in .NET applications. To include a NodeXL network graph in a WPF desktop or Windo...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.113: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version inclu...OAuthLib: OAuthLib (1.6.0.0): Difference between previous version is as next. 7079 Make it possible to pass factory method of request in ObtainUnauthorizedRequestToken and Reque...patterns & practices SharePoint Guidance: SPG2010 Drop 5: SharePoint Guidance Drop Notes Microsoft patterns and practices ****************************************** ***************************************...PowerShell Remote File Explorer: PSRemoteExplorer 0.1: This release is the initial release of PowerShell remote file explorer. This enables the basic functionality of a remote file explorer. This also p...Reusable Library: v1.0.3: A collection of reusable abstractions for enterprise application developer.SharePoint Outlook Connector: Version 1.0.2.4: Version 1.0.2.4 Minor bugs have been fixed.Silverlight Server File Manager: First production release: This release is in production. Release on change set 37268.SIMD Detector: 2nd Release: Released C/CLI assembly project for use in CSharp and VB. Tested in CSharp console application. A Windows Form application coming soon. Projects ma...Source Analysis Policy: Source Analysis Policy v1.1 SP1: This release contains the compiled, and signed binaries in an installation package. This package also registers the policy with Microsoft Visual St...SpecExpress : A Fluent Validation Framework: SpecExpress 1.1: UpdatesAdded Validation Contexts feature Fixed bug with handling for Bool Types and Required MessageStore now allows for overriding individual ...VCC: Latest build, v2.1.30223.0: Automatic drop of latest buildVS2010 Rc1 Fix: RC1Fix01: This is a very simple project implementing a Microsoft Walkthrough at http://msdn.microsoft.com/en-us/library/wdb4eb30%28VS.100%29.aspx and the man...WPF AutoComplete TextBox Control: version 1.0: Initial releaseMost Popular ProjectsASP.NET Ajax LibraryManaged Extensibility FrameworkAccelerators for Microsoft Dynamics CRMWindows 7 USB/DVD Download ToolDotNetZip LibraryMDownloaderVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2MFCMAPIDroid ExplorerUseful Sharepoint Designer Custom Workflow ActivitiesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETInfoServiceNB_Store - Free DotNetNuke Ecommerce Catalog ModuleRapid Entity Framework. (ORM). CTP 2SharpMap - Geospatial Application Framework for the CLRjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryXcoordination Application Space

Read the article
What output and recording ports does the Java Sound API find on your computer?

- by Dave Carpeneto

Hi all - I'm working with the Java Sound API, and it turns out if I want to adjust recording volumes I need to model the hardware that the OS exposes to Java. Turns out there's a lot of variety in what's presented. Because of this I'm humbly asking that anyone able to help me run the following on their computer and post back the results so that I can get an idea of what's out there. A thanks in advance to anyone that can assist :-) import javax.sound.sampled.*; public class SoundAudit { public static void main(String[] args) { try { System.out.println("OS: "+System.getProperty("os.name")+" "+ System.getProperty("os.version")+"/"+ System.getProperty("os.arch")+"\nJava: "+ System.getProperty("java.version")+" ("+ System.getProperty("java.vendor")+")\n"); for (Mixer.Info thisMixerInfo : AudioSystem.getMixerInfo()) { System.out.println("Mixer: "+thisMixerInfo.getDescription()+ " ["+thisMixerInfo.getName()+"]"); Mixer thisMixer = AudioSystem.getMixer(thisMixerInfo); for (Line.Info thisLineInfo:thisMixer.getSourceLineInfo()) { if (thisLineInfo.getLineClass().getName().equals( "javax.sound.sampled.Port")) { Line thisLine = thisMixer.getLine(thisLineInfo); thisLine.open(); System.out.println(" Source Port: " +thisLineInfo.toString()); for (Control thisControl : thisLine.getControls()) { System.out.println(AnalyzeControl(thisControl));} thisLine.close();}} for (Line.Info thisLineInfo:thisMixer.getTargetLineInfo()) { if (thisLineInfo.getLineClass().getName().equals( "javax.sound.sampled.Port")) { Line thisLine = thisMixer.getLine(thisLineInfo); thisLine.open(); System.out.println(" Target Port: " +thisLineInfo.toString()); for (Control thisControl : thisLine.getControls()) { System.out.println(AnalyzeControl(thisControl));} thisLine.close();}}} } catch (Exception e) {e.printStackTrace();}} public static String AnalyzeControl(Control thisControl) { String type = thisControl.getType().toString(); if (thisControl instanceof BooleanControl) { return " Control: "+type+" (boolean)"; } if (thisControl instanceof CompoundControl) { System.out.println(" Control: "+type+ " (compound - values below)"); String toReturn = ""; for (Control children: ((CompoundControl)thisControl).getMemberControls()) { toReturn+=" "+AnalyzeControl(children)+"\n";} return toReturn.substring(0, toReturn.length()-1);} if (thisControl instanceof EnumControl) { return " Control:"+type+" (enum: "+thisControl.toString()+")";} if (thisControl instanceof FloatControl) { return " Control: "+type+" (float: from "+ ((FloatControl) thisControl).getMinimum()+" to "+ ((FloatControl) thisControl).getMaximum()+")";} return " Control: unknown type";} } All the application does is print out a line about the OS, a line about the JVM, and a few lines about the hardware found that may pertain to recording hardware. For example on my PC at work I get the following: OS: Windows XP 5.1/x86 Java: 1.6.0_07 (Sun Microsystems Inc.) Mixer: Direct Audio Device: DirectSound Playback [Primary Sound Driver] Mixer: Direct Audio Device: DirectSound Playback [SoundMAX HD Audio] Mixer: Direct Audio Device: DirectSound Capture [Primary Sound Capture Driver] Mixer: Direct Audio Device: DirectSound Capture [SoundMAX HD Audio] Mixer: Software mixer and synthesizer [Java Sound Audio Engine] Mixer: Port Mixer [Port SoundMAX HD Audio] Source Port: MICROPHONE source port Control: Microphone (compound - values below) Control: Select (boolean) Control: Microphone Boost (boolean) Control: Front panel microphone (boolean) Control: Volume (float: from 0.0 to 1.0) Source Port: LINE_IN source port Control: Line In (compound - values below) Control: Select (boolean) Control: Volume (float: from 0.0 to 1.0) Control: Balance (float: from -1.0 to 1.0)

Read the article
Android: Getting Error: Conversion to Dalvik format failed

- by Rupesh C

I am building an app on android and running into an error and while searching on net, came across your posting on this and changed the eclipse.ini to increase Xms and Xmx params but still this error does not go away. I am using Eclipse IDE for Java with Andrioid SDK 2.1 on Mac OS. Please help or please point me to someone who might know. Btw, this error only happens when i add external jar files (which i need for my project). here are the list of external jar files that i have in my classpath.) // httpclient-4.0.1.jar from apache // httpcore -4.0.1.jarfrom apache // commons-codec-1.3.jar from apache //commons-logging-1.1.1.jar from apache // json_simple-1.1.jar from google Here is the complete error: UNEXPECTED TOP-LEVEL EXCEPTION: java.lang.IllegalArgumentException: already added: Lorg/apache/commons/logging/impl/AvalonLogger; [2010-05-02 21:57:05 - MyApp] at com.android.dx.dex.file.ClassDefsSection.add(ClassDefsSection.java:123) [2010-05-02 21:57:05 - MyApp] at com.android.dx.dex.file.DexFile.add(DexFile.java:143) [2010-05-02 21:57:05 - MyApp] at com.android.dx.command.dexer.Main.processClass(Main.java:301) [2010-05-02 21:57:05 - MyApp] at com.android.dx.command.dexer.Main.processFileBytes(Main.java:278) [2010-05-02 21:57:05 - MyApp] at com.android.dx.command.dexer.Main.access$100(Main.java:56) [2010-05-02 21:57:05 - MyApp] at com.android.dx.command.dexer.Main$1.processFileBytes(Main.java:229) [2010-05-02 21:57:05 - MyApp] at com.android.dx.cf http://com.android.dx.cf.direct.ClassPathOpener.pro .direct.ClassPathOpener.processArchive(ClassPathOpener.java:244) [2010-05-02 21:57:05 - MyApp] at com.android.dx.cf.direct.ClassPathOpener.processOne(ClassPathOpener.java:130) [2010-05-02 21:57:05 - MyApp] at com.android.dx.cf.direct.ClassPathOpener.process(ClassPathOpener.java:108) [2010-05-02 21:57:05 - MyApp] at com.android.dx.command.dexer.Main.processOne(Main.java:247) [2010-05-02 21:57:05 - MyApp] at com.android.dx.command.dexer.Main.processAllFiles(Main.java:183) [2010-05-02 21:57:05 - MyApp] at com.android.dx.command.dexer.Main.run(Main.java:139) [2010-05-02 21:57:05 - MyApp] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) [2010-05-02 21:57:05 - MyApp] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) [2010-05-02 21:57:05 - MyApp] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [2010-05-02 21:57:05 - MyApp] at java.lang.reflect.Method.invoke(Method.java:592) [2010-05-02 21:57:05 - MyApp] at com.android.ide.eclipse.adt.internal.sdk.DexWrapper.run(Unknown Source) [2010-05-02 21:57:05 - MyApp] at com.android.ide.eclipse.adt.internal.build.ApkBuilder.executeDx(Unknown Source) [2010-05-02 21:57:05 - MyApp] at com.android.ide.eclipse.adt.internal.build.ApkBuilder.build(Unknown Source) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:627) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:170) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:201) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:253) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:256) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:309) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:341) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:140) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:238) [2010-05-02 21:57:05 - MyApp] at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) [2010-05-02 21:57:05 - MyApp] 4 errors; aborting [2010-05-02 21:57:05 - MyApp] Conversion to Dalvik format failed with error 1 Thanks, Rupesh

Read the article
Objective-C categories in static library

- by Vladimir

Can you guide me how to properly link static library to iphone project. I use staic library project added to app project as direct dependency (target - general - direct dependecies) and all works OK, but categories. A category defined in static library is not working in app. So my question is how to add static library with some categories into other project? And in general, what is best practice to use in app project code from other projects?

Read the article
Obj-c categories in static library

- by Vladimir

Can you guide me how to properly link static library to iphone project. I use staic library project added to app project as direct dependency (target - general - direct dependecies) and all works OK, but categories. A category defined in static library is not working in app. So my question is how to add static library with some categories into other project? And in general, what is best practice to use in app project code from other projects?

Read the article
RMI applet is making requests on random ports and blocked consequently

- by Dan

/// I have set up RMI system successfully on local ubuntu srver. Registry port 1099 and remote object export on 1100(fixed by calling super(1100)) Now I am trying to make it work on Ubuntu over internet with a public IP. I could bind service properly with public ip.But the client applet is trying to connect to ubuntu server at random ports. Below is the error thrown by client applet: // Exception network: Connecting public-ip:1100 with proxy=DIRECT network: Connecting public-ip/cgi-bin/java-rmi.cgi?forward=1099 with proxy=DIRECT network: Connecting public-ip:3733 with proxy=DIRECT network: Connecting public-ip:3721 with proxy=DIRECT // java.rmi.ConnectException: Connection refused to host: public-ip; nested exception is: java.net.ConnectException: Connection refused: connect at sun.rmi.transport.tcp.TCPEndpoint.newSocket(Unknown Source)Source) at java.net.AbstractPlainSocketImpl.connectToAddress(Unknown Source) ... // // I have only 2 ports open on server, i.e., 1099(registry) and 1100(export). How can I fix ports in applet requests such that it does always connect server on same open port? // // Another issue.As I have bound service on public IP i.e. //public-ip:1099/ServiceName, a job running on server to send message to clinets is not able to make request to RMI service. public-ip URL does not work on same machine,i.e., server.Do you think I should use fixed socket factory?If so please give me code snippet and guide me how i can set it up. //Exception java.rmi.ConnectException: Connection refused to host: public-ip; nested exception is: java.net.ConnectException: Connection refused at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:619) at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:216) at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:202) at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:128) at java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(RemoteObjectInvocationHandler.java:194) at java.rmi.server.RemoteObjectInvocationHandler.invoke(RemoteObjectInvocationHandler.java:148) at $Proxy5.getUserID(Unknown Source) at rmi.source.xxxxxx$JobScheduler.run(xxxxServerImpl.java:293) at java.util.TimerThread.mainLoop(Timer.java:555) at java.util.TimerThread.run(Timer.java:505) Caused by: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:337) at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:198) at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:180) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:391) at java.net.Socket.connect(Socket.java:579) at java.net.Socket.connect(Socket.java:528) at java.net.Socket.(Socket.java:425) at java.net.Socket.(Socket.java:208) at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:40) at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:146) at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:613) ... 9 more Coould you please help me? Thanks a lot in advance. Dan

Read the article
setup apache virtualhost (windows)

- by nightingale2k1

Hi, How to setup virtualhost for multiple domain name on windows ? I will use it for my own test projects. I have 3 projects that I need to setup and at the moment I'm using xampplite for the portable apache. www.foo-bar.com -- direct to c:\xampplite\htdocs\foo-bar\ www.abcdef.com -- directo to c:\xampplite\htdocs\abcdef\ www.qwerty.com -- direct to c:\xampplite\htdocs\qwerty\web\ I also need to access on another project but it just like typing http://localhost/my-project/ how to write the vhost configuration for that ?

Read the article
jQuery - .toggle() triggering on page load

- by Jean

Hello, When I click on the word Directory, the up arrow image must change to down, and vice-versa when clicked again. In this code, when the page loads, toggle is triggered. $('#direct').click(function(){ $('#arrow').attr('src','images/down_arrow_black.gif'); }); <div id="direct"><img src="images/up_arrow_black.gif" id="arrow" />Directory</div> Thanks Jean

Read the article
How can a program tell if another process is running as a service?

- by quietdragon

I have a Win32 program which I can direct to monitor another Win32 process. I want to find a way for the monitoring program to determine if the monitored process is running as a Win32 service. Not all services run as SYSTEM and not all services have services.exe as a direct parent, so I don't regard these obvious techniques as being robust enough.

Read the article
Why Is Faulty Behaviour In The .NET Framework Not Fixed?

- by Alois Kraus

Here is the scenario: You have a Windows Form Application that calls a method via Invoke or BeginInvoke which throws exceptions. Now you want to find out where the error did occur and how the method has been called. Here is the output we do get when we call Begin/EndInvoke or simply Invoke The actual code that was executed was like this: private void cInvoke_Click(object sender, EventArgs e) { InvokingFunction(CallMode.Invoke); } [MethodImpl(MethodImplOptions.NoInlining)] void InvokingFunction(CallMode mode) { switch (mode) { case CallMode.Invoke: this.Invoke(new MethodInvoker(GenerateError)); The faulting method is called GenerateError which does throw a NotImplementedException exception and wraps it in a NotSupportedException. [MethodImpl(MethodImplOptions.NoInlining)] void GenerateError() { F1(); } private void F1() { try { F2(); } catch (Exception ex) { throw new NotSupportedException("Outer Exception", ex); } } private void F2() { throw new NotImplementedException("Inner Exception"); } It is clear that the method F2 and F1 did actually throw these exceptions but we do not see them in the call stack. If we directly call the InvokingFunction and catch and print the exception we can find out very easily how we did get into this situation. We see methods F1,F2,GenerateError and InvokingFunction directly in the stack trace and we see that actually two exceptions did occur. Here is for comparison what we get from Invoke/EndInvoke System.NotImplementedException: Inner Exception StackTrace: at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous) at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args) at WindowsFormsApplication1.AppForm.InvokingFunction(CallMode mode) at WindowsFormsApplication1.AppForm.cInvoke_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) The exception message is kept but the stack starts running from our Invoke call and not from the faulting method F2. We have therefore no clue where this exception did occur! The stack starts running at the method MarshaledInvoke because the exception is rethrown with the throw catchedException which resets the stack trace. That is bad but things are even worse because if previously lets say 5 exceptions did occur .NET will return only the first (innermost) exception. That does mean that we do not only loose the original call stack but all other exceptions and all data contained therein as well. It is a pity that MS does know about this and simply closes this issue as not important. Programmers will play a lot more around with threads than before thanks to TPL, PLINQ that do come with .NET 4. Multithreading is hyped quit a lot in the press and everybody wants to use threads. But if the .NET Framework makes it nearly impossible to track down the easiest UI multithreading issue I have a problem with that. The problem has been reported but obviously not been solved. .NET 4 Beta 2 did not have changed that dreaded GetBaseException call in MarshaledInvoke to return only the innermost exception of the complete exception stack. It is really time to fix this. WPF on the other hand does the right thing and wraps the exceptions inside a TargetInvocationException which makes much more sense. But Not everybody uses WPF for its daily work and Windows forms applications will still be used for a long time. Below is the code to repro the issues shown and how the exceptions can be rendered in a meaningful way. The default Exception.ToString implementation generates a hard to interpret stack if several nested exceptions did occur. using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; using System.Globalization; using System.Runtime.CompilerServices; namespace WindowsFormsApplication1 { public partial class AppForm : Form { enum CallMode { Direct = 0, BeginInvoke = 1, Invoke = 2 }; public AppForm() { InitializeComponent(); Thread.CurrentThread.CurrentUICulture = CultureInfo.InvariantCulture; Application.ThreadException += new System.Threading.ThreadExceptionEventHandler(Application_ThreadException); } void Application_ThreadException(object sender, System.Threading.ThreadExceptionEventArgs e) { cOutput.Text = PrintException(e.Exception, 0, null).ToString(); } private void cDirectUnhandled_Click(object sender, EventArgs e) { InvokingFunction(CallMode.Direct); } private void cDirectCall_Click(object sender, EventArgs e) { try { InvokingFunction(CallMode.Direct); } catch (Exception ex) { cOutput.Text = PrintException(ex, 0, null).ToString(); } } private void cInvoke_Click(object sender, EventArgs e) { InvokingFunction(CallMode.Invoke); } private void cBeginInvokeCall_Click(object sender, EventArgs e) { InvokingFunction(CallMode.BeginInvoke); } [MethodImpl(MethodImplOptions.NoInlining)] void InvokingFunction(CallMode mode) { switch (mode) { case CallMode.Direct: GenerateError(); break; case CallMode.Invoke: this.Invoke(new MethodInvoker(GenerateError)); break; case CallMode.BeginInvoke: IAsyncResult res = this.BeginInvoke(new MethodInvoker(GenerateError)); this.EndInvoke(res); break; } } [MethodImpl(MethodImplOptions.NoInlining)] void GenerateError() { F1(); } private void F1() { try { F2(); } catch (Exception ex) { throw new NotSupportedException("Outer Exception", ex); } } private void F2() { throw new NotImplementedException("Inner Exception"); } StringBuilder PrintException(Exception ex, int identLevel, StringBuilder sb) { StringBuilder builtStr = sb; if( builtStr == null ) builtStr = new StringBuilder(); if( ex == null ) return builtStr; WriteLine(builtStr, String.Format("{0}: {1}", ex.GetType().FullName, ex.Message), identLevel); WriteLine(builtStr, String.Format("StackTrace: {0}", ShortenStack(ex.StackTrace)), identLevel + 1); builtStr.AppendLine(); return PrintException(ex.InnerException, ++identLevel, builtStr); } void WriteLine(StringBuilder sb, string msg, int identLevel) { foreach (string trimmedLine in SplitToLines(msg) .Select( (line) => line.Trim()) ) { for (int i = 0; i < identLevel; i++) sb.Append('\t'); sb.Append(trimmedLine); sb.AppendLine(); } } string ShortenStack(string stack) { int nonAppFrames = 0; // Skip stack frames not part of our app but include two foreign frames and skip the rest // If our stack frame is encountered reset counter to 0 return SplitToLines(stack) .Where((line) => { nonAppFrames = line.Contains("WindowsFormsApplication1") ? 0 : nonAppFrames + 1; return nonAppFrames < 3; }) .Select((line) => line) .Aggregate("", (current, line) => current + line + Environment.NewLine); } static char[] NewLines = Environment.NewLine.ToCharArray(); string[] SplitToLines(string str) { return str.Split(NewLines, StringSplitOptions.RemoveEmptyEntries); } } }

Read the article
using respond_to format.js to replace the content of a textarea on rails

- by Stacia

I have some saved text in my create controller. If it's not stressful, I'd like it to populate a textarea on the page with the saved text along with displaying the error message fields (which is what's already happening). I've used things like replace_html before, but I don't know if there's an easy way to get to textarea or text field IDs and just replace the value of the text. For now I'm just going to do some javascript but it would be nice to know the rails shortcut. edit: I wasn't in the right mindset because this app uses extjs and was trying to figure out how to do it this way. The text box is actually an ext status bar (same as here : http://www.extjs.com/deploy/dev/examples/statusbar/statusbar-demo.html ) which doesn't get created until the page is finished loading. When I try to enter commnands like the first poster suggested, I get "setvalue is not a function". Playing with firebug on the page I can get it to set the value after loading by using (whatever method to get it through ext or scriptaculous).value = "lol" but none of the page update things work with this.

Read the article
Another sound not working post

- by Thomas Smart

Tried all the other "sound not working" posts i think, lost count. purge/reinstall alsa and pulse, reboot, add user to audio group, various lines in the alsa config file such as "options snd-hda-intel model=" then tried different options like generic, auto, basic, default, etc. tried pulseaudio -k && sudo alsa force-reload a few times, with and without rebooting. Hardware: 16gb ram, core I7-4790, Intel Haswell mboard with onboard sound and graphics Multimedia: Audio Adapter: HDA-Intel-HDA Intel HDMI OS: Ubuntu server 14.04 with ubuntu-desktop installed. GUI sound settings lists only the dummy sound card alsamixer -c 0 ¦ Card: HDA Intel HDMI F1: Help ¦ ¦ Chip: Intel Haswell HDMI F2: System information ¦ ¦ View: F3:[Playback] F4: Capture F5: All F6: Select sound card ¦ ¦ Item: S/PDIF ¦ ¦ +--+ ¦ ¦ ¦OO¦ ¦ ¦ +--+ ¦ ¦ < S/PDIF > ¦ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server hdmi:CARD=HDMI,DEV=0 HDA Intel HDMI, HDMI 0 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample mixing device dsnoop:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample snooping device hw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Hardware device with all software conversions cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7d14000 irq 46 cat /proc/asound/devices 1: : sequencer 2: [ 0- 3]: digital audio playback 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer mplayer -ao alsa:device=hdmi /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1' [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory [AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory [AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi [AO_ALSA] Playback open error: No such file or directory Failed to initialize audio driver 'alsa:device=hdmi' Could not open/initialize audio device -> no sound. Audio: no sound Video: no video Exiting... (End of file) mplayer -ao alsa:device=hw=0.3 /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] Format floatle is not supported by hardware, trying default. AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: 0.4 (00.4) of 0.8 (00.7) 0.1% Exiting... (End of file) Thank you for your time and help :)

Read the article
Tablet design guide, Endeca patterns now available

- by JuergenKress

UX Direct, an Oracle program that offers consultants, partners, and customers the same scientifically proven and reusable user experience best practices that Oracle uses to build Oracle Applications, recently added links to a new design guide for creating tablet-based solutions for enterprise applications, and to the recently published Endeca User Interface Design Pattern Library. The tablet design guide is available from the UX Direct Home page. Tap the button under “Latest patterns & tools” for “Oracle Applications UX Tablet Guide.” It provides basic help for designers, developers, and project managers trying to approach tablet design and testing from an enterprise point of view. To hear what developers are saying about it, follow the links from this post on the User Experience Assistance blog. The newly released Endeca User Interface Design Pattern Library is also available from the UX Direct Home page and from a post on the User Experience Assistance blog. It describes principled ways to solve common user interface (UI) design problems related to search, faceted navigation, and discovery. The link between Simplified UI and Oracle UX strategy, plus content you can share on the cloud, ADf, tailoring, and more Simplified User Interface in Oracle Fusion Applications Fronts Oracle Cloud Offerings This new article on Simplified UI has just been posted on Usable Apps. Learn about the three themes - simplicity, mobility, and extensibility – that Simplified UI embodies. These same principles are guiding the development of the next generation of the Oracle user experience. Oracle's Applications User Experience Strategy: One Cloud User Experience, with Optimized UIs Where and How You Want This podcast from Misha Vaughan, Director, User Experience, is now available on the Oracle University Knowledge Center. It is available for partners and Oracle employees at this iLearning Link. Oracle Partner Builds User Experience That Hits Right Note for New Employees This new article on the Usable Apps website explores the experience of consultants at IntraSee as they implement a PeopleSoft onboarding process for Invesco, a global asset management company. The Feng Shui of Fusion This article in Oracle Scene is from Grant Ronald, Director of Product Management, on the Tools of Fusion: Oracle JDeveloper and Oracle ADF. Hands-On Workshop with Fusion Applications and ADF UX Desktop Design Patterns This post on the Voice of User Experience, or VoX, blog from Misha Vaughan describes a new kind of workshop for partners and a handful of internal Oracle sales folks on extending Oracle Fusion Applications and building custom applications with Application Development Framework (ADF) while maintaining the Oracle user experience. To learn more about the content that was delivered during this three-day workshop, visit the Usable Apps blog. Recent posts from a new blog series take a look at several of the topics discussed during the workshop. Applications User Experience Fundamentals Visual Design for any Enterprise User Interface / Art School in a Box Wireframing / Blueprinting Usable Applications Concepts. Tailoring videos This blog post from Richard Bingham, Applications Architect, on the Fusion Applications Developer Relations blog provides links to several videos that show many customization and development tasks using the Oracle Fusion Applications platform. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: UX,Architecture,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

Read the article
Pull Request Changes, Multi-Selection in Advanced View, and Advertisement Changes

[Do you tweet? Follow us on Twitter @matthawley and @adacole_msft] We deployed a new version of the CodePlex website today. Pull Request Changes In this release, we have begun to re-focus on Pull Requests to ensure a productive experience between the project users and developers. We feel we made significant progress in this area for this release and look forward to using your feedback to drive future iterations. One of the biggest hurdles people have indicated is the inability to see what a pull request includes without pulling the source down from a Mercurial client. With today’s changes, any user has the ability to view a pull request, the changesets / changes included, and perform an inline diff of the file. When a pull request is made, the CodePlex website will query for all outgoing changes from the fork to the main repository for a point-in-time comparison. Because of this point-in-time comparison… All existing pull requests created prior to this release will not have changesets associated with them. If new commits are pushed to the fork while a pull request is active, they will not appear associated with the pull request. The pull request will need to be re-submitted for them to appear. Once a pull request is created, you can “View the Pull Request” which takes you to a page that looks like As you may notice, we now display a lot more detailed information regarding that pull request including who it was requested by and when, the associated changesets, the description, who it’s assigned to (we’ll come back to this) and the listing of summarized file changes. What you’ll also notice, is that each modified file has the ability to view a diff of all changes made. When you click “(view diff)” for a file, an inline diff experience appears. This new experience allows you to quickly navigate through all of the modified files as well as viewing the various change blocks for each file. You’ll also notice as you browse through each file’s changes, we update the URL to include the file path so you can quickly send a direct link to a pull request’s file. Clicking “(close diff)” will bring you back to the original pull request view. View this pull request live on WikiPlex. Pull Request Review Assignment Another new feature we added for pull requests is the ability for project members to assign pull requests for review. Any project member has the ability to assign (and re-assign if needed) a pull request to a project member. Once the assignment has been made, that project member will be notified via email of the assignment. Once they complete the review of the pull request, they can either accept or deny it similarly to the previous process. Multi-Selection in Advanced View Filters One of the more recent requests we have heard from users is the ability multi-select advanced view filters for work items. We are happy to announce this is now possible. Simply control-click the multiple options for each filter item and your work item query will be refined as such. Should you happen to unselect all options for a given filter, it will automatically reset to the default option for that filter. Furthermore, the “Direct Link” URL will be updated to include the multi-selected options for each filter. Note: The “Direct Link” feature was released in our previous deployment, just never written about. It allows you to capture the current state of your query and send it to other individuals. Advertisement Changes Very recently, the advertiser (The Lounge) we partnered to provide advertising revenue for projects, or donated to charity, was acquired by Lake Quincy Media. There has been no change in the advertising platform offering, and all projects have been converted over to using the new infrastructure. Project owners should note the new contact information for getting paid. The CodePlex team values your feedback, and is frequently monitoring Twitter, our Discussions and Issue Tracker for new features or problems. If you’ve not visited the Issue Tracker recently, please take a few moments to log an idea or vote for the features you would most like to see implemented on CodePlex.

Read the article
Ant build from Android-generated build file fails - how to fix?

- by Eno

Building our Android app from Ant fails with this error: [apply] [apply] UNEXPECTED TOP-LEVEL ERROR: [apply] java.lang.OutOfMemoryError: Java heap space [apply] at java.util.HashMap.<init>(HashMap.java:209) [apply] at java.util.HashSet.<init>(HashSet.java:86) [apply] at com.android.dx.ssa.Dominators.compress(Dominators.java:96) [apply] at com.android.dx.ssa.Dominators.eval(Dominators.java:132) [apply] at com.android.dx.ssa.Dominators.run(Dominators.java:213) [apply] at com.android.dx.ssa.DomFront.run(DomFront.java:84) [apply] at com.android.dx.ssa.SsaConverter.placePhiFunctions(SsaConverter.java:265) [apply] at com.android.dx.ssa.SsaConverter.convertToSsaMethod(SsaConverter.java:51) [apply] at com.android.dx.ssa.Optimizer.optimize(Optimizer.java:100) [apply] at com.android.dx.ssa.Optimizer.optimize(Optimizer.java:74) [apply] at com.android.dx.dex.cf.CfTranslator.processMethods(CfTranslator.java:269) [apply] at com.android.dx.dex.cf.CfTranslator.translate0(CfTranslator.java:131) [apply] at com.android.dx.dex.cf.CfTranslator.translate(CfTranslator.java:85) [apply] at com.android.dx.command.dexer.Main.processClass(Main.java:297) [apply] at com.android.dx.command.dexer.Main.processFileBytes(Main.java:276) [apply] at com.android.dx.command.dexer.Main.access$100(Main.java:56) [apply] at com.android.dx.command.dexer.Main$1.processFileBytes(Main.java:228) [apply] at com.android.dx.cf.direct.ClassPathOpener.processArchive(ClassPathOpener.java:245) [apply] at com.android.dx.cf.direct.ClassPathOpener.processOne(ClassPathOpener.java:130) [apply] at com.android.dx.cf.direct.ClassPathOpener.process(ClassPathOpener.java:108) [apply] at com.android.dx.command.dexer.Main.processOne(Main.java:245) [apply] at com.android.dx.command.dexer.Main.processAllFiles(Main.java:183) [apply] at com.android.dx.command.dexer.Main.run(Main.java:139) [apply] at com.android.dx.command.dexer.Main.main(Main.java:120) [apply] at com.android.dx.command.Main.main(Main.java:87) BUILD FAILED Ive tried giving Ant more memory by setting ANT_OPTS="-Xms256m -Xmx512m". (This build machine has 1Gb RAM). Do I just need more memory or is there anything else I can try?

Read the article
What's the recommended implemenation for hashing OLE Variants?

- by Barry Kelly

OLE Variants, as used by older versions of Visual Basic and pervasively in COM Automation, can store lots of different types: basic types like integers and floats, more complicated types like strings and arrays, and all the way up to IDispatch implementations and pointers in the form of ByRef variants. Variants are also weakly typed: they convert the value to another type without warning depending on which operator you apply and what the current types are of the values passed to the operator. For example, comparing two variants, one containing the integer 1 and another containing the string "1", for equality will return True. So assuming that I'm working with variants at the underlying data level (e.g. VARIANT in C++ or TVarData in Delphi - i.e. the big union of different possible values), how should I hash variants consistently so that they obey the right rules? Rules: Variants that hash unequally should compare as unequal, both in sorting and direct equality Variants that compare as equal for both sorting and direct equality should hash as equal It's OK if I have to use different sorting and direct comparison rules in order to make the hashing fit. The way I'm currently working is I'm normalizing the variants to strings (if they fit), and treating them as strings, otherwise I'm working with the variant data as if it was an opaque blob, and hashing and comparing its raw bytes. That has some limitations, of course: numbers 1..10 sort as [1, 10, 2, ... 9] etc. This is mildly annoying, but it is consistent and it is very little work. However, I do wonder if there is an accepted practice for this problem.

Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36 | Next Page >