Search Results

Search found 839 results on 34 pages for 'eye'.

Page 29/34 | < Previous Page | 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • Exitus Acta Probat: The Post-Processing Module

    - by Phil Factor
    Sometimes, one has to make certain ethical compromises to ensure the success of a corporate IT project. Exitus Acta Probat (literally 'the result validates the deeds' meaning that the ends justify the means)It was a while back, whilst working as a Technical Architect for a well-known international company, that I was given the task of designing the architecture of a rather specialized accounting system. We'd tried an off-the-shelf (OTS) Windows-based solution which crashed with dispiriting regularity, and didn't quite do what the business required. After a great deal of research and planning, we commissioned a Unux-based system that used X-terminals for the desktops of  the participating staff. X terminals are now obsolete, but were then hot stuff; stripped-down Unix workstations that provided client GUIs for networked applications long before the days of AJAX, Flash, Air and DHTML. I've never known a project go so smoothly: I'd been initially rather nervous about going the Unix route, believing then that  Unix programmers were excitable creatures who were prone to  indulge in role-play enactments of elves and wizards at the weekend, but the programmers I met from the company that did the work seemed to be rather donnish, earnest, people who quickly grasped our requirements and were faultlessly professional in their work.After thinking lofty thoughts for a while, there was considerable pummeling of keyboards by our suppliers, and a beautiful robust application was delivered to us ahead of dates.Soon, the department who had commissioned the work received shiny new X Terminals to replace their rather depressing lavatory-beige PCs. I modestly hung around as the application was commissioned and deployed to the department in order to receive the plaudits. They didn't come. Something was very wrong with the project. I couldn't put my finger on the problem, and the users weren't doing any more than desperately and futilely searching the application to find a fault with it.Many times in my life, I've come up against a predicament like this: The roll-out of an application goes wrong and you are hearing nothing that helps you to discern the cause but nit-*** noise. There is a limit to the emotional heat you can pack into a complaint about text being in the wrong font, or an input form being slightly cramped, but they tried their best. The answer is, of course, one that every IT executive should have tattooed prominently where they can read it in emergencies: In Vino Veritas (literally, 'in wine the truth', alcohol loosens the tongue. A roman proverb) It was time to slap the wallet and get the department down the pub with the tab in my name. It was an eye-watering investment, but hedged with an over-confident IT director who relished my discomfort. To cut a long story short, The real reason gushed out with the third round. We had deprived them of their PCs, which had been good for very little from the pure business perspective, but had provided them with many hours of happiness playing computer-based minesweeper and solitaire. There is no more agreeable way of passing away the interminable hours of wage-slavery than minesweeper or solitaire, and the employees had applauded the munificence of their employer who had provided them with the means to play it. I had, unthinkingly, deprived them of it.I held an emergency meeting with our suppliers the following day. I came over big with the notion that it was in their interests to provide a solution. They played it cool, probably knowing that it was my head on the block, not theirs. In the end, they came up with a compromise. they would temporarily descend from their lofty, cerebral stamping grounds  in order to write a server-based Minesweeper and Solitaire game for X Terminals, and install it in a concealed place within the system. We'd have to pay for it, though. I groaned. How could we do that? "Could we call it a 'post-processing module?" suggested their account executive.And so it came to pass. The application was a resounding success. Every now and then, the staff were able to indulge in some 'post-processing', with what turned out to be a very fine implementation of both minesweeper and solitaire. There were several refinements: A single click in a 'boss' button turned the games into what looked just like a financial spreadsheet.  They even threw in a multi-user version of Battleships. The extra payment for the post-processing module went through the change-control process without anyone untoward noticing, and peace once more descended. Only one thing niggles. Those games were good. Do they still survive, somewhere in a Linux library? If so, I'd like to claim a small part in their production.

    Read the article

  • Find the best OpenWorld sessions for learning about UX highlights

    - by mvaughan
    By Kathy Miedema, Oracle Applications User Experience  Have you clicked through the Oracle OpenWorld 2012 catalog? It’s amazingly dense, as usual. But one thing we noticed this year is that nearly half of the sessions mention some component of user experience, which is a sea change in our world. It means that more people understand, appreciate, and desire an effective user experience, and it also means that Oracle’s investment in its next-generation applications user experience, such as Oracle Fusion Applications, is increasingly apparent and interesting to its customers. So how do you choose the user experience sessions that make the most sense for you and your organization? Read our list to find out which sessions we think offer the most value for those interested in finding out more about the Oracle Applications user experience. If you’re interested in Oracle’s strategy for its user experience: CON9438: Oracle Fusion Applications: Transforming Insight into Action10:15 - 11:15 a.m. Tuesday, Oct. 2; Moscone West – 2007 CON9467: Oracle’s Roadmap to a Simple, Modern User Experience3:30 - 4:30 p.m. Wednesday, Oct. 3; Moscone West - 3002/3004 CON8718: Oracle Fusion Applications: Customizing and Extending with Oracle Composers11:15 a.m. - 12:15 p.m. Thursday, Oct. 4; Moscone West – 2008 GEN9663: General Session: A Panel of Masterminds—Where Are Oracle Applications Headed?1:45 - 2:45 p.m. Monday, Oct. 1; Moscone North - Hall D If you’re interested in PeopleSoft/PeopleTools: GEN8928: General Session: PeopleSoft Update and Product Roadmap3:15 - 4:15 p.m. Monday, Oct. 1; Moscone West - 3002/3004 CON9183: PeopleSoft PeopleTools Technology Roadmap4:45 - 5:45 p.m. Monday, Oct. 1; Moscone West - 3002/3004 CON8932: New Functional PeopleSoft PeopleTools Capabilities for the Line-of-Business User5:00 - 6:00 p.m. Tuesday, Oct. 2; Moscone West – 3007 If you’re interested in E-Business Suite: GEN8474: General Session: Oracle E-Business Suite—Strategy, Update, and Roadmap12:15 - 1:15 p.m. Monday, Oct. 1; Moscone West - 2002/2004 CON9026: Latest Oracle E-Business Suite 12.1 User Interface and Usability Enhancements1:15 - 2:15 p.m. Tuesday, Oct. 2; Moscone West – 2016 If you’re interested in Siebel: CON9700: Siebel CRM Overview, Strategy, and Roadmap12:15 - 1:15 p.m. Monday, Oct. 1; Moscone West – 2009 CON9703: User Interface Innovations with the New Siebel “Open UI”10:15 - 11:15 a.m. Tuesday, Oct. 2; Moscone West – 2009 If you’re interested in JD Edwards EnterpriseOne: HOL10452: JD Edwards EnterpriseOne 9.1 User Interface Changes10:15 - 11:15 a.m. Wednesday, Oct. 3; Marriott Marquis - Nob Hill AB CON9160: Showcase of the JD Edwards EnterpriseOne User Experience1:15 - 2:15 p.m. Wednesday, Oct. 3; InterContinental - Grand Ballroom B CON9159: Euphoria with the JD Edwards EnterpriseOne User Experience11:45 a.m. - 12:45 p.m. Wednesday, Oct. 3; InterContinental - Grand Ballroom B If you’re interested in Oracle Fusion Applications user experience design patterns: Functional design patterns that helped create the Oracle Fusion Applications user experience are now available. Learn more about these new, reusable usability solutions and best-practices at the Oracle JDeveloper and Oracle ADF demopods during Oracle OpenWorld 2012. Or visit the OTN Lounge between 4:30 p.m. and 6 p.m. on Wednesday, Oct. 3, to talk to Ultan O'Broin from the Oracle Applications User Experience team.    Demopod location: Moscone Center, South Exhibition Hall Level 1, S-207 OTN (Oracle Technology Network) Lounge: Howard Street tent On the demogrounds: Head to the demogrounds to see new demos from the Applications User Experience team, including the new look for Fusion Applications and what we’re building for mobile platforms. Take a spin on our eye tracker, a very cool tool that we use to research the usability of a particular design. Visit the Usable Apps OpenWorld page to find out where our demopods will be located.Photo by Martin Taylor, Oracle Applications User ExperienceA tour takes place in one of the usability labs at Oracle’s headquarters in Redwood Shores, Calif. At our labs, on-site and at HQ: We are also recruiting participants for our on-site lab, in which we gather feedback on new user experience designs, and taking reservations for a charter bus that will bring you to Oracle headquarters for a lab tour Thursday, Oct. 4, or Friday, Oct. 5. Tours leave at 10 a.m. and 1:45 p.m. from the Moscone Center in San Francisco. You’ll see more of our newest designs at the lab tour, and some of our research tools in action. For more information on any OpenWorld sessions, check the content catalog, also available at www.oracle.com/openworld. For information on Applications User Experience (Apps UX) sessions and activities, go to the Usable Apps OpenWorld page.

    Read the article

  • Tuning Red Gate: #4 of Some

    - by Grant Fritchey
    First time connecting to these servers directly (keys to the kingdom, bwa-ha-ha-ha. oh, excuse me), so I'm going to take a look at the server properties, just to see if there are any issues there. Max memory is set, cool, first possible silly mistake clear. In fact, these look to be nicely set up. Oh, I'd like to see the ANSI Standards set by default, but it's not a big deal. The default location for database data is the F:\ drive, where I saw all the activity last time. Cool, the people maintaining the servers in our company listen, parallelism threshold is set to 35 and optimize for ad hoc is enabled. No shocks, no surprises. The basic setup is appropriate. On to the problem database. Nothing wrong in the properties. The database is in SIMPLE recovery, but I think it's a reporting system, so no worries there. Again, I'd prefer to see the ANSI settings for connections, but that's the worst thing I can see. Time to look at the queries, tables, indexes and statistics because all the information I've collected over the last several days suggests that we're not looking at a systemic problem (except possibly not enough memory), but at the traditional tuning issues. I just want to note that, I started looking at the system, not the queries. So should you when tuning your environment. I know, from the data collected through SQL Monitor, what my top poor performing queries are, and the most frequently called, etc. I'm starting with the most frequently called. I'm going to get the execution plan for this thing out of the cache (although, with the cache dumping constantly, I might not get it). And it's not there. Called 1.3 million times over the last 3 days, but it's not in cache. Wow. OK. I'll see what's in cache for this database: SELECT  deqs.creation_time,         deqs.execution_count,         deqs.max_logical_reads,         deqs.max_elapsed_time,         deqs.total_logical_reads,         deqs.total_elapsed_time,         deqp.query_plan,         SUBSTRING(dest.text, (deqs.statement_start_offset / 2) + 1,                   (deqs.statement_end_offset - deqs.statement_start_offset) / 2                   + 1) AS QueryStatement FROM    sys.dm_exec_query_stats AS deqs         CROSS APPLY sys.dm_exec_sql_text(deqs.sql_handle) AS dest         CROSS APPLY sys.dm_exec_query_plan(deqs.plan_handle) AS deqp WHERE   dest.dbid = DB_ID('Warehouse') AND deqs.statement_end_offset > 0 AND deqs.statement_start_offset > 0 ORDER BY deqs.max_logical_reads DESC ; And looking at the most expensive operation, we have our first bad boy: Multiple table scans against very large sets of data and a sort operation. a sort operation? It's an insert. Oh, I see, the table is a heap, so it's doing an insert, then sorting the data and then inserting into the primary key. First question, why isn't this a clustered index? Let's look at some more of the queries. The next one is deceiving. Here's the query plan: You're thinking to yourself, what's the big deal? Well, what if I told you that this thing had 8036318 reads? I know, you're looking at skinny little pipes. Know why? Table variable. Estimated number of rows = 1. Actual number of rows. well, I'm betting several more than one considering it's read 8 MILLION pages off the disk in a single execution. We have a serious and real tuning candidate. Oh, and I missed this, it's loading the table variable from a user defined function. Let me check, let me check. YES! A multi-statement table valued user defined function. And another tuning opportunity. This one's a beauty, seriously. Did I also mention that they're doing a hash against all the columns in the physical table. I'm sure that won't lead to scans of a 500,000 row table, no, not at all. OK. I lied. Of course it is. At least it's on the top part of the Loop which means the scan is only executed once. I just did a cursory check on the next several poor performers. all calling the UDF. I think I found a big tuning opportunity. At this point, I'm typing up internal emails for the company. Someone just had their baby called ugly. In addition to a series of suggested changes that we need to implement, I'm also apologizing for being such an unkind monster as to question whether that third eye & those flippers belong on such an otherwise lovely child.

    Read the article

  • Is Linear Tape File System (LTFS) Best For Transportable Storage?

    - by rickramsey
    Those of us in tape storage engineering take a lot of pride in what we do, but understand that tape is the right answer to a storage problem only some of the time. And, unfortunately for a storage medium with such a long history, it has built up a few preconceived notions that are no longer valid. When I hear customers debate whether to implement tape vs. disk, one of the common strikes against tape is its perceived lack of usability. If you could go back a few generations of corporate acquisitions, you would discover that StorageTek engineers recognized this problem and started developing a solution where a tape drive could look just like a memory stick to a user. The goal was to not have to care about where files were on the cartridge, but to simply see the list of files that were on the tape, and click on them to open them up. Eventually, our friends in tape over at IBM built upon our work at StorageTek and Sun Microsystems and released the Linear Tape File System (LTFS) feature for the current LTO5 generation of tape drives as an open specification. LTFS is really a wonderful feature and we’re proud to have taken part in its beginnings and, as you’ll soon read, its future. Today we offer LTFS-Open Edition, which is free for you to use in your in Oracle Enterprise Linux 5.5 environment - not only on your LTO5 drives, but also on your Oracle StorageTek T10000C drives. You can download it free from Oracle and try it out. LTFS does exactly what its forefathers imagined. Now you can see immediately which files are on a cartridge. LTFS does this by splitting a cartridge into two partitions. The first holds all of the necessary metadata to create a directory structure for you to easily view the contents of the cartridge. The second partition holds all of the files themselves. When tape media is loaded onto a drive, a complete file system image is presented to the user. Adding files to a cartridge can be as simple as a drag-and-drop just as you do today on your laptop when transferring files from your hard drive to a thumb drive or with standard POSIX file operations. You may be thinking all of this sounds nice, but asking, “when will I actually use it?” As I mentioned at the beginning, tape is not the right solution all of the time. However, if you ever need to physically move data between locations, tape storage with LTFS should be your most cost-effective and reliable answer. I will give you a few use cases examples of when LTFS can be utilized. Media and Entertainment (M&E), Oil and Gas (O&G), and other industries have a strong need for their storage to be transportable. For example, an O&G company hunting for new oil deposits in remote locations takes very large underground seismic images which need to be shipped back to a central data center. M&E operations conduct similar activities when shooting video for productions. M&E companies also often transfers files to third-parties for editing and other activities. These companies have three highly flawed options for transporting data: electronic transfer, disk storage transport, or tape storage transport. The first option, electronic transfer, is impractical because of the expense of the bandwidth required to transfer multi-terabyte files reliably and efficiently. If there’s one place that has bandwidth, it’s your local post office so many companies revert to physically shipping storage media. Typically, M&E companies rely on transporting disk storage between sites even though it, too, is expensive. Tape storage should be the preferred format because as IDC points out, “Tape is more suitable for physical transportation of large amounts of data as it is less vulnerable to mechanical damage during transportation compared with disk" (See note 1, below). However, tape storage has not been used in the past because of the restrictions created by proprietary formats. A tape may only be readable if both the sender and receiver have the same proprietary application used to write the file. In addition, the workflows may be slowed by the need to read the entire tape cartridge during recall. LTFS solves both of these problems, clearing the way for tape to become the standard platform for transferring large files. LTFS is open and, as long as you’ve downloaded the free reader from our website or that of anyone in the LTO consortium, you can read the data. So if a movie studio ships a scene to a third-party partner to add, for example, sounds effects or a music score, it doesn’t have to care what technology the third-party has. If it’s written back to an LTFS-formatted tape cartridge, it can be read. Some tape vendors like to claim LTFS is a “standard,” but beauty is in the eye of the beholder. It’s a specification at this point, not a standard. That said, we’re already seeing application vendors create functionality to write in an LTFS format based on the specification. And it’s my belief that both customers and the tape storage industry will see the most benefit if we all follow the same path. As such, we have volunteered to lead the way in making LTFS a standard first with the Storage Network Industry Association (SNIA), and eventually through to standard bodies such as American National Standards Institute (ANSI). Expect to hear good news soon about our efforts. So, if storage transportability is one of your requirements, I recommend giving LTFS a look. It makes tape much more user-friendly and it’s free, which allows tape to maintain all of its cost advantages over disk! Note 1 - IDC Report. April, 2011. “IDC’s Archival Storage Solutions Taxonomy, 2011” - Brian Zents Website Newsletter Facebook Twitter

    Read the article

  • Answers to “What source control system do you use?” (and some winners)

    - by jamiet
    About a month ago I posed a question here on my blog SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff) in which I asked SQL Server developers to answer the following questions: Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? I had some really great responses (I highly recommend going and reading them). I promised that the five best, most thought-provoking, responses (as determined by me) would win one of five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect; here are the five that I chose (note that if you responded but did not leave a means of getting in touch then you weren’t considered for one of the prizes – sorry): In general, I don't think the management overhead and licensing cost associated with TFS is worthwhile if all you're doing is using source control. To get value from TFS, at a minimum you need to be using team build, and possibly other stuff as well, such as the sharepoint integration. If that's all you need, then svn with Tortoise would be my first choice. If you want to add build automation later, you can do this with cruisecontrol (is it still called that?), JetBrains, etc. For a long time I thought that Redgate's claims about "bridging the SSMS-VS divide" were a load of hot air, since in my experience anyone who knew what they were doing was using Visual Studio, in particular SSDT and its predecessors. However, on a recent client I was putting in source control for the first time, and I discovered that the "divide" really does exist. That client has ended up using svn with Redgate SQL Source Control, with no build automation, but with scope to add it in the future. Gavin Campbell I think putting the DB under source control is a great idea.  I have issues with the earlier versions of SQL Source Control in that it provides little help in versioning the DB. I think the latest version merges SQL Compare and SQL Source Control together.  Which is how it should have been all along. Sure I have the DB scripts in SVN, but I can't automate DB builds and changes without more tools.  Frankly I'm surprised databases don't have some sort of versioning built into them. Nick Portelli Source control has been immensely useful and saved me from a lot of rework on more than one occasion.  I have learned that you have to be extremely careful checking in data.  Our system is internal only so during the system production run once a week, if there is a problem that I can fix easily(for example, a control table points to a file in the wrong environment), I'll do it directly in production so the run can continue as soon as possible since we have a specified time window.  We do full test runs to minimize this but it has come up once or twice.  We use Red-Gate source control to "push" from the test environment to the production environment.  There have been a couple of occasions where the test environment with the wrong setting was pushed back over the production environment because the change was made only in production.  Gotta keep an eye on that. Alan Dykes Goodness is it manual.  And can be extremely painful at times.  Not only are we running thin, we are constrained on the tools we can get ($$ must mean free).  Certainly no excuse, and a great opportunity to improve my skills by learning new things.  But...  Getting buy in a on a proven process or methodology is hard, takes time, and diverts us from development.  If SQL Source Control is easy to use and proven oh boy could you get some serious fans around here!  Seriously though, as the "accidental dba" of this shop any new ideas / easy to implement tools can make a world of difference in productivity and most importantly accuracy.  Manual = bad. :) John Hennesey (who left his email address) The one thing I would love to know more about is the unique challenges of working with databases as source code - you can store scripts, but are they written as deployment scripts with all the logic about how to apply them to an existing DB? Where is that baseline DB? Where's the data? How does a team share the data and the code? It's a real challenge. Merrill Aldrich Congratulations to the five of you. Red Gate will be in touch with you soon about your free licenses. Thank you to all those that responded. And again, go and check out all the responses – those above are only small proportion from what is a very interesting comment thread. @Jamiet

    Read the article

  • IBM "per core" comparisons for SPECjEnterprise2010

    - by jhenning
    I recently stumbled upon a blog entry from Roman Kharkovski (an IBM employee) comparing some SPECjEnterprise2010 results for IBM vs. Oracle. Mr. Kharkovski's blog claims that SPARC delivers half the transactions per core vs. POWER7. Prior to any argument, I should say that my predisposition is to like Mr. Kharkovski, because he says that his blog is intended to be factual; that the intent is to try to avoid marketing hype and FUD tactic; and mostly because he features a picture of himself wearing a bike helmet (me too). Therefore, in a spirit of technical argument, rather than FUD fight, there are a few areas in his comparison that should be discussed. Scaling is not free For any benchmark, if a small system scores 13k using quantity R1 of some resource, and a big system scores 57k using quantity R2 of that resource, then, sure, it's tempting to divide: is  13k/R1 > 57k/R2 ? It is tempting, but not necessarily educational. The problem is that scaling is not free. Building big systems is harder than building small systems. Scoring  13k/R1  on a little system provides no guarantee whatsoever that one can sustain that ratio when attempting to handle more than 4 times as many users. Choosing the denominator radically changes the picture When ratios are used, one can vastly manipulate appearances by the choice of denominator. In this case, lots of choices are available for the resource to be compared (R1 and R2 above). IBM chooses to put cores in the denominator. Mr. Kharkovski provides some reasons for that choice in his blog entry. And yet, it should be noted that the very concept of a core is: arbitrary: not necessarily comparable across vendors; fluid: modern chips shift chip resources in response to load; and invisible: unless you have a microscope, you can't see it. By contrast, one can actually see processor chips with the naked eye, and they are a bit easier to count. If we put chips in the denominator instead of cores, we get: 13161.07 EjOPS / 4 chips = 3290 EjOPS per chip for IBM vs 57422.17 EjOPS / 16 chips = 3588 EjOPS per chip for Oracle The choice of denominator makes all the difference in the appearance. Speaking for myself, dividing by chips just seems to make more sense, because: I can see chips and count them; and I can accurately compare the number of chips in my system to the count in some other vendor's system; and Tthe probability of being able to continue to accurately count them over the next 10 years of microprocessor development seems higher than the probability of being able to accurately and comparably count "cores". SPEC Fair use requirements Speaking as an individual, not speaking for SPEC and not speaking for my employer, I wonder whether Mr. Kharkovski's blog article, taken as a whole, meets the requirements of the SPEC Fair Use rule www.spec.org/fairuse.html section I.D.2. For example, Mr. Kharkovski's footnote (1) begins Results from http://www.spec.org as of 04/04/2013 Oracle SUN SPARC T5-8 449 EjOPS/core SPECjEnterprise2010 (Oracle's WLS best SPECjEnterprise2010 EjOPS/core result on SPARC). IBM Power730 823 EjOPS/core (World Record SPECjEnterprise2010 EJOPS/core result) The questionable tactic, from a Fair Use point of view, is that there is no such metric at the designated location. At www.spec.org, You can find the SPEC metric 57422.17 SPECjEnterprise2010 EjOPS for Oracle and You can also find the SPEC metric 13161.07 SPECjEnterprise2010 EjOPS for IBM. Despite the implication of the footnote, you will not find any mention of 449 nor anything that says 823. SPEC says that you can, under its fair use rule, derive your own values; but it emphasizes: "The context must not give the appearance that SPEC has created or endorsed the derived value." Substantiation and transparency Although SPEC disclaims responsibility for non-SPEC information (section I.E), it says that non-SPEC data and methods should be accurate, should be explained, should be substantiated. Unfortunately, it is difficult or impossible for the reader to independently verify the pricing: Were like units compared to like (e.g. list price to list price)? Were all components (hw, sw, support) included? Were all fees included? Note that when tpc.org shows IBM pricing, there are often items such as "PROCESSOR ACTIVATION" and "MEMORY ACTIVATION". Without the transparency of a detailed breakdown, the pricing claims are questionable. T5 claim for "Fastest Processor" Mr. Kharkovski several times questions Oracle's claim for fastest processor, writing You see, when you publish industry benchmarks, people may actually compare your results to other vendor's results. Well, as we performance people always say, "it depends". If you believe in performance-per-core as the primary way of looking at the world, then yes, the POWER7+ is impressive, spending its chip resources to support up to 32 threads (8 cores x 4 threads). Or, it just might be useful to consider performance-per-chip. Each SPARC T5 chip allows 128 hardware threads to be simultaneously executing (16 cores x 8 threads). The Industry Standard Benchmark that focuses specifically on processor chip performance is SPEC CPU2006. For this very well known and popular benchmark, SPARC T5: provides better performance than both POWER7 and POWER7+, for 1 chip vs. 1 chip, for 8 chip vs. 8 chip, for integer (SPECint_rate2006) and floating point (SPECfp_rate2006), for Peak tuning and for Base tuning. For example, at the 8-chip level, integer throughput (SPECint_rate2006) is: 3750 for SPARC 2170 for POWER7+. You can find the details at the March 2013 BestPerf CPU2006 page SPEC is a trademark of the Standard Performance Evaluation Corporation, www.spec.org. The two specific results quoted for SPECjEnterprise2010 are posted at the URLs linked from the discussion. Results for SPEC CPU2006 were verified at spec.org 1 July 2013, and can be rechecked here.

    Read the article

  • PeopleSoft at Alliance 2012 Executive Forum

    - by John Webb
    Guest Posting From Rebekah Jackson This week I jointed over 4,800 Higher Ed and Public Sector customers and partners in Nashville at our annual Alliance conference.   I got lost easily in the hallways of the sprawling Gaylord Opryland Hotel. I carried the resort map with me, and I would still stand for several minutes at a very confusing junction, studying the map and the signage on the walls. Hallways led off in many directions, some with elevators going down here and stairs going up there. When I took a wrong turn I would instantly feel stuck, lose my bearings, and occasionally even have to send out a call for help.    It strikes me that the theme for the Executive Forum this year outlines a less tangible but equally disorienting set of challenges that our higher education customer’s CIOs are facing: Making Decisions at the Intersection of Business Value, Strategic Investment, and Enterprise Technology. The forces acting upon higher education institutions today are not neat, straight-forward decision points, where one can glance to the right, glance to the left, and then quickly choose the best course of action. The operational, technological, and strategic factors that must be considered are complex, interrelated, messy…and the stakes are high. Michael Horn, co-author of “Disrupting Class: How Disruptive Innovation Will Change the Way the World Learns”, set the tone for the day. He introduced the model of disruptive innovation, which grew out of the research he and his colleagues have done on ‘Why Successful Organizations Fail’. Highly simplified, the pattern he shared is that things start out decentralized, take a leap to extreme centralization, and then experience progressive decentralization. Using computers as an example, we started with a slide rule, then developed the computer which centralized in the form of mainframes, and gradually decentralized to mini-computers, desktop computers, laptops, and now mobile devices. According to Michael, you have more computing power in your cell phone than existed on the planet 60 years ago, or was on the first rocket that went to the moon. Applying this pattern to Higher Education means the introduction of expensive and prestigious private universities, followed by the advent of state schools, then by community colleges, and now online education. Michael shared statistics that indicate 50% of students will be taking at least one on line course by 2014…and by some measures, that’s already the case today. The implication is that technology moves from being the backbone of the campus, the IT department’s domain, and pushes into the academic core of the institution. Innovative programs are underway at many schools like Bellevue and BYU Idaho, joined by startups and disruptive new players like the Khan Academy.   This presents both threat and opportunity for higher education institutions, and means that IT decisions cannot afford to be disconnected from the institution’s strategic plan. Subsequent sessions explored this theme.    Theo Bosnak, from Attain, discussed the model they use for assessing the complete picture of an institution’s financial health. Compounding the issue are the dramatic trends occurring in technology and the vendors that provide it. Ovum analyst Nicole Engelbert, shared her insights next and suggested that incremental changes are no longer an option, instead fundamental changes are affecting the landscape of enterprise technology in higher ed.    Nicole closed with her recommendation that institutions focus on the trends in higher education with an eye towards the strategic requirements and business value first. Technology then is the enabler.   The last presentation of the day was from Tom Fisher, Sr. Vice President of Cloud Services at Oracle. Tom runs the delivery arm of the Cloud Services group, and shared his thoughts candidly about his experiences with cloud deployments as well as key issues around managing costs and security in cloud deployments. Okay, we’ve covered a lot of ground at this point, from financials planning, business strategy, and cloud computing, with the possibility that half of the institutions in the US might not be around in their current form 10 years from now. Did I forget to mention that was raised in the morning session? Seems a little hard to believe, and yet Michael Horn made a compelling point. Apparently 100 years ago, 8 of the top 10 education institutions in the world were German. Today, the leading German school is ranked somewhere in the 40’s or 50’s. What will the landscape be 100 years from now? Will there be an institution from China, India, or Brazil in the top 10? As Nicole suggested, maybe US parents will be sending their children to schools overseas much sooner, faced with the ever-increasing costs of a US based education. Will corporations begin to view skill-based certification from an online provider as a viable alternative to a 4 year degree from an accredited institution, fundamentally altering the education industry as we know it?

    Read the article

  • Beginner Geek: How to Use Multiple Monitors to Be More Productive

    - by Chris Hoffman
    Many people swear by multiple monitors, whether they’re geeks or just people who need to be productive. Why use just one monitor when you can use two or more and see more at once? Additional monitors allow you to expand your desktop, getting more screen real estate for your open programs. Windows makes it very easy to set up additional monitors, and your computer probably has the necessary ports. Why Use Multiple Monitors? Multiple monitors give you more screen real estate. Hook up multiple monitors to a computer and you can move your mouse back and forth between them, dragging programs between monitors as if you had an extra-large desktop. People who swear by multiple monitors use them to display multiple things on-screen at a time. Rather than Alt+Tabbing and task switching to glance at another window, you can just look over with your eyes and then look back to the program you’re using. Some examples of use cases for multiple monitors include: Coders who want to view their code on one display with the other display reserved for documentation. They can just glance over at the documentation and look back at their primary workspace. Anyone who needs to view something while working. Viewing a web page while writing an email, viewing another document while writing an something, or working with two large spreadsheets and having both visible at once. People who need to keep an eye on information, whether it’s email or up-to-date statistics, while working. Gamers who want to see more of the game world, extending the game across multiple displays. Geeks who just want to watch a video on one screen while doing something else on the other screen. Hooking Up Multiple Monitors Hooking up an additional monitor to your computer should be very simple. Most new computers come with more than one port for a monitor — whether DVI, HDMI, the older VGA port, or a mix. Some computers may include splitter cables that allow you to connect multiple monitors to a single port. Most laptops also come with ports that allow you to hook up an external monitor. Plug a monitor into your laptop’s DVI or VGA port and Windows will allow you to use both your laptop’s integrated display and the external monitor at once. This all depends on the ports your computer has and how your monitor connects. If you have an old VGA monitor lying around and you have a modern laptop with only DVI or HDMI connectors, you may need an adapter that allows you to plug your monitor’s VGA cable into the new port. Be sure to take your computer’s ports into account before you get another monitor for it. Managing Multiple Monitors With Windows Windows makes using multiple monitors easy. Just plug the monitor into the appropriate port on your computer and Windows should automatically extend your desktop onto it. You can now just drag and drop windows between monitors. To control how this works, right-click your Windows desktop and select Screen resolution. Choose an option from the Multiple displays box. The Extend option extends your desktop onto an additional monitor, while the other options are mainly useful if you’re using an additional monitor for presentations — for example, you could mirror your laptop’s desktop onto a large monitor or blank your laptop’s screen while it’s connected to a larger display. Be sure to arrange your monitors properly so Windows understands how your monitors are physically positioned. Windows 8 allows you to extend your Windows taskbar across multiple monitors. You’ll find this option in the taskbar’s options window — right-click the taskbar and select Properties. You can also choose where you want Windows to display taskbar buttons for open programs — on any monitor’s taskbar or only on the taskbar on the associated monitor. Windows 7 doesn’t have these convenient features built-in — your second monitor won’t have a taskbar. To extend your taskbar onto an additional monitor, you’ll need a third-party utility like the free and open-source Dual Monitor Taskbar. If you just have a single monitor, you can also use the Aero Snap feature to quickly place multiple Windows applications side by side. On Windows 7 or 8, press Windows Key + Left or Windows Key + Right to make the current window take up the left or right half of your display. You could also drag any window’s title bar to the left or right edges of your screen and release the window. How useful this feature is depends on your monitor’s size and resolution. If you have a large, high-resolution monitor, it will allow you to see a lot. If you have a smaller laptop monitor with the seemingly standard 1366×768 resolution, you won’t be able to see much of each snapped window at once, so snapping windows may not be practical. Image Credit: Chance Reecher on Flickr, Camp Atterbury Joint Maneuver Training Center on Flickr, Xavier Caballe on Flickr     

    Read the article

  • Silverlight Cream Monday WP7 App Review # 1

    - by Dave Campbell
    I'm going to try something here... if it seems useful, I'll continue, if it doesn't, I'll stop... so give me feedback! There are *lots* of Apps in the WP7 Marketplace, and heaven help me, but the Marketplace sucks for finding stuff. I won't rehash what's already been said in the blogs, but I agree with one and all. I went out last Saturday to find 2 apps that I knew were released, and couldn't do so on my device. Even in the Zune app, it took quite a while to find them... ok, I'll back off a bit, because I just found out I can do 'Search' now if I know the name... I didn't think that was working before. So my thought is on Monday (like today), I will post a review of 5 apps/games I either use or have played with on my device. These are strictly my opinions, you understand, but hey... it's better than a poke in the eye with an iPhone! A few disclaimers:     Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week, and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. In this Issue:   Jingo! is the first app I bought, just to see what the experience was like. It's very much like a game we used to play in school in the Army in 1971 on paper we passed around. Sort of a cross between hangman and Mastermind, you try to figure out the hidden word in 5 tries. You get really good at 5-letter words after a while. I like this because you have to think, and you're not pressured by a clock Jingo! is by James Furdell and is $1.99 I reviewed René Schulte's Pictures Lab a while back, and have not changed my mind. This is an excellent app for playing with any photo on your device... one you've just taken, one you've synced from your PC, or one you've saved from email. I like this because you can get some cool effects for your photos, and it just works. Pictures Lab is by Schulte Software Development and is $1.99 Since I work as a consultant, and from home, I wanted something I could track my time with. I've test-driven all the contenders I could find so far on the phone, and so far I like ONTRACK! the best. If asked, I have some suggestions, but it's probably just the way I work or think. What I do like is I can tap a project to start/stop/restart a counter, and at the end of the day it shows me how much time I've been working. If there's a way to make an adjustment in case you forget to tap the counter, I don't know how to do it, and that's my biggest complaint. I like this because you can get a daily readout which you can also email as a spreadsheet. The daily results display is very good. ONTRACK! is by Qmino and is $2.99 Remember Item 4 above... I've been playing guitar for 48 years... obviously since before the invention of 'tuners', so I'm not as dependent upon these as some folks are. I've tried some in the past and have always felt I can do just as good by ear (I have perfect relative pitch). So, I gave this app by András Velvárt a dance just to see how it works, and it is surprisingly good. If you're used to one of the stage tuners this may take a little getting used to, but it does the job. The difference with this one is there is no real 'null' point inside which you can think your guitar is in tune. The soundwave stays visible on the device, and if it's moving to the right, your string is flat, if it's moving to the left, your string is sharp. Getting it exact might be tricky, but it is exact! If you need to rely on a tuner, this is a good choice in my opinion, exactly because of the sensitivity.. tune up with this and you're dead-on. Guitar Tuner is by Kinabalu Innovation Limited and is $0.99 Popper 2 is the WP7 version of a wildly popular game by Bill Reiss named Dr. Popper. You can get a trial, or you can now get a free lite version of the game. Popper 2 is a fast-paced bubble breaker game. I find it something fun to play when I just want to buzz out, but maybe the best review is that my daughter didn't want to give my phone back when I showed it to her, and always wants to grab my phone to play 'that game'. A fun distraction with great graphics and a great price Popper 2 is by Blue Rose Systems, LLC and is $1.29 Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light!   Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Mouse takes a while to start working after boot

    - by warkior
    I just recently installed Ubuntu 12.04 (64 bit) and a number of my USB devices have stopped working. At least, they don't work for the first 3-5 minutes. I have two mice (one wireless, one wired) and a camera, which seem to take Ubuntu 3-5 minutes to recognize after booting up. Eventually, they do start to work, but it takes ages! lsusb results: (when the mice are working...) $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 003 Device 003: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317 Bus 006 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 006 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver syslog entries for what seems (to my very untrained eye) to be the problem: Oct 12 20:12:51 REMOVED-GA-MA785GM-US2H kernel: [ 17.420117] usb 2-3: device descriptor read/64, error -110 Oct 12 20:12:57 REMOVED-GA-MA785GM-US2H goa[1879]: goa-daemon version 3.4.0 starting [main.c:112, main()] Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.636107] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.852122] usb 2-3: new high-speed USB device number 3 using ehci_hcd Oct 12 20:13:21 REMOVED-GA-MA785GM-US2H kernel: [ 47.964131] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.180115] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.396126] usb 2-3: new high-speed USB device number 4 using ehci_hcd Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.804158] usb 2-3: device not accepting address 4, error -110 Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.916190] usb 2-3: new high-speed USB device number 5 using ehci_hcd Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324160] usb 2-3: device not accepting address 5, error -110 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324197] hub 2-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: failed to claim interface Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: Failed to get parent Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb3/3-3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: MFG:hp MDL:psc 1310 series SERN:CN47CB60BJO2 serial:CN47CB60BJO2 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.768132] usb 5-3: new full-speed USB device number 2 using ohci_hcd Oct 12 20:14:01 REMOVED-GA-MA785GM-US2H udev-configure-printer: no corresponding CUPS device found Oct 12 20:14:13 REMOVED-GA-MA785GM-US2H kernel: [ 99.904185] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.144188] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.384178] usb 5-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:14:44 REMOVED-GA-MA785GM-US2H kernel: [ 130.520196] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 145.760179] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 146.000173] usb 5-3: new full-speed USB device number 4 using ohci_hcd Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.408168] usb 5-3: device not accepting address 4, error -110 Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.544188] usb 5-3: new full-speed USB device number 5 using ohci_hcd Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952181] usb 5-3: device not accepting address 5, error -110 Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952215] hub 5-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.216164] usb 6-2: new low-speed USB device number 2 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-2" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 2 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396138] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input16 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396442] generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2/input0 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.660187] usb 6-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 3 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.859045] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input2 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865086] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0006/input/input17 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865291] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.1-3:1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2040: invalid product id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2045: invalid serial id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2050: invalid manufacturer string ret=-1

    Read the article

  • Annoying flickering of vertices and edges (possible z-fighting)

    - by Belgin
    I'm trying to make a software z-buffer implementation, however, after I generate the z-buffer and proceed with the vertex culling, I get pretty severe discrepancies between the vertex depth and the depth of the buffer at their projected coordinates on the screen (i.e. zbuffer[v.xp][v.yp] != v.z, where xp and yp are the projected x and y coordinates of the vertex v), sometimes by a small fraction of a unit and sometimes by 2 or 3 units. Here's what I think is happening: Each triangle's data structure holds the plane's (that is defined by the triangle) coefficients (a, b, c, d) computed from its three vertices from their normal: void computeNormal(Vertex *v1, Vertex *v2, Vertex *v3, double *a, double *b, double *c) { double a1 = v1 -> x - v2 -> x; double a2 = v1 -> y - v2 -> y; double a3 = v1 -> z - v2 -> z; double b1 = v3 -> x - v2 -> x; double b2 = v3 -> y - v2 -> y; double b3 = v3 -> z - v2 -> z; *a = a2*b3 - a3*b2; *b = -(a1*b3 - a3*b1); *c = a1*b2 - a2*b1; } void computePlane(Poly *p) { double x = p -> verts[0] -> x; double y = p -> verts[0] -> y; double z = p -> verts[0] -> z; computeNormal(p -> verts[0], p -> verts[1], p -> verts[2], &p -> a, &p -> b, &p -> c); p -> d = p -> a * x + p -> b * y + p -> c * z; } The z-buffer just holds the smallest depth at the respective xy coordinate by somewhat casting rays to the polygon (I haven't quite got interpolation right yet so I'm using this slower method until I do) and determining the z coordinate from the reversed perspective projection formulas (which I got from here: double z = -(b*Ez*y + a*Ez*x - d*Ez)/(b*y + a*x + c*Ez - b*Ey - a*Ex); Where x and y are the pixel's coordinates on the screen; a, b, c, and d are the planes coefficients; Ex, Ey, and Ez are the eye's (camera's) coordinates. This last formula does not accurately give the exact vertices' z coordinate at their projected x and y coordinates on the screen, probably because of some floating point inaccuracy (i.e. I've seen it return something like 3.001 when the vertex's z-coordinate was actually 2.998). Here is the portion of code that hides the vertices that shouldn't be visible: for(i = 0; i < shape.nverts; ++i) { double dist = shape.verts[i].z; if(z_buffer[shape.verts[i].yp][shape.verts[i].xp].z < dist) shape.verts[i].visible = 0; else shape.verts[i].visible = 1; } How do I solve this issue? EDIT I've implemented the near and far planes of the frustum, with 24 bit accuracy, and now I have some questions: Is this what I have to do this in order to resolve the flickering? When I compare the z value of the vertex with the z value in the buffer, do I have to convert the z value of the vertex to z' using the formula, or do I convert the value in the buffer back to the original z, and how do I do that? What are some decent values for near and far? Thanks in advance.

    Read the article

  • Existential CAML - does an item exist?

    - by PointsToShare
    © 2011 By: Dov Trietsch. All rights reserved More CAML and existence. In “SharePoint List Issues” and “Passing the CAML thru the EY of the NEEDL we saw how to use CAML to return a subset of a list and also how to check the existence of lists, fields, defaults, and values.   Here is a general function that may be used to get a subset of a list by comparing a “text” type field to a given value.  The function is pretty smart. It can be used to check existence or to return a collection of items that may be further processed. It handles non existing fields and replaces them with the ubiquitous “Title”, but only once!  /// Build an SPQuery that returns a selected set of columns from a List /// titleField must be a "Text" type field /// When the titleField parameter is empty ("") "Title" is assumed /// When the title parameter is empty ("") All is assumed /// When the columnNames parameter is null, the query returns all the fields /// When the rowLimit parameter is 0, the query return all the items. /// with a non-zero, the query returns at most rowLimits /// /// usage: to check if an item titled "Blah" exists in your list, do: /// colNames = {"Title"} /// col = GetListItemColumnByTitle(myList, "", "Blah", colNames, 1) /// Check the col.Count. if > 0 the item exists and is in the collection private static SPListItemCollection GetListItemColumnByTitle(SPList list, string titleField, string title, string[] columnNames, uint rowLimit) {   try   {     char QT = Convert.ToChar((int)34);     SPQuery query = new SPQuery();     if (title != "")     {       string tf = titleField;       if (titleField == "") tf = "Title";       tf = CAMLThisName(list, tf, "Title");        StringBuilder titleQuery = new StringBuilder  ("<Where><Eq><FieldRef Name=");       titleQuery.Append(QT);       titleQuery.Append(tf);       titleQuery.Append(QT);       titleQuery.Append("/><Value Type=");       titleQuery.Append(QT);       titleQuery.Append("Text");       titleQuery.Append(QT);       titleQuery.Append(">");       titleQuery.Append(title);       titleQuery.Append("</Value></Eq></Where>");       query.Query = titleQuery.ToString();     }     if (columnNames.Length != 0)     {       StringBuilder sb = new StringBuilder("");       bool TitleAlreadyIncluded = false;       foreach (string columnName in columnNames)       {         string tst = CAMLThisName(list, columnName, "Title");         //Allow Title only once         if (tst != "Title" || !TitleAlreadyIncluded)         {           sb.Append("<FieldRef Name=");           sb.Append(QT);           sb.Append(tst);           sb.Append(QT);           sb.Append("/>");           if (tst == "Title") TitleAlreadyIncluded = true;         }       }       query.ViewFields = sb.ToString();     }     if (rowLimit > 0)     {        query.RowLimit = rowLimit;     }     SPListItemCollection col = list.GetItems(query);     return col;   }   catch (Exception ex)   {     //Console.WriteLine("GetListItemColumnByTitle" + ex.ToString());     //sw.WriteLine("GetListItemColumnByTitle" + ex.ToString());     return null;   } } Here I called it for a list in which “Author” (it is the internal name for “Created”) and “Blah” do not exist. The list of column names is:  string[] columnNames = {"Test Column1", "Title", "Author", "Allow Multiple Ratings", "Blah"};  So if I use this call, I get all the items for which “01-STD MIL_some” has the value of 1. the fields returned are: “Test Column1”, “Title”, and “Allow Multiple Ratings”. Because “Title” was already included and the default for non exixsting is “Title”, it was not replicated for the 2 non-existing fields.  SPListItemCollection col = GetListItemColumnByTitle(masterList, "01-STD MIL_some", "1", columnNames, 0); The following call checks if there are any items where “01-STD MIL_some” has the value of “1”. Note that I limited the number of returned items to 1.  SPListItemCollection col = GetListItemColumnByTitle(masterList, "01-STD MIL_some", "1", columnNames, 1); The code also uses the CAMLThisName function that checks for an existence of a field and returns its InternalName. This is yet another useful function that I use again and again.  /// <summary> /// return a fields internal name (CAMLName)  /// or the "default" name that you passed. /// To check existence pass "" or some funny name like "mud in your eye" /// </summary> public static string CAMLThisName(SPList list, string name, string def) {   String CAMLName = def;   SPField fld = GetFieldByName(list, name);   if (fld != null)   {      CAMLName = fld.InternalName;   }   return CAMLName; } That’s all folks?!

    Read the article

  • JavaDay Taipei 2014 Trip Report

    - by reza_rahman
    JavaDay Taipei 2014 was held at the Taipei International Convention Center on August 1st. Organized by Oracle University, it is one of the largest Java developer events in Taiwan. This was another successful year for JavaDay Taipei with a fully sold out venue packed with youthful, energetic developers (this was my second time at the event and I have already been invited to speak again next year!). In addition to Oracle speakers like me, Steve Chin and Naveen Asrani, the event also featured a bevy of local speakers including Taipei Java community leaders. Topics included Java SE, Java EE, JavaFX, cloud and Big Data. It was my pleasure and privilege to present one of the opening keynotes for the event. I presented my session on Java EE titled "JavaEE.Next(): Java EE 7, 8, and Beyond". I covered the changes in Java EE 7 as well as what's coming in Java EE 8. I demoed the Cargo Tracker Java EE BluePrints. I also briefly talked about Adopt-a-JSR for Java EE 8. The slides for the keynote are below (click here to download and view the actual PDF): It appears your Web browser is not configured to display PDF files. No worries, just click here to download the PDF file. In the afternoon I did my JavaScript + Java EE 7 talk titled "Using JavaScript/HTML5 Rich Clients with Java EE 7". This talk is basically about aligning EE 7 with the emerging JavaScript ecosystem (specifically AngularJS). The talk was completely packed. The slide deck for the talk is here: JavaScript/HTML5 Rich Clients Using Java EE 7 from Reza Rahman The demo application code is posted on GitHub. The code should be a helpful resource if this development model is something that interests you. Do let me know if you need help with it but the instructions should be fairly self-explanatory. I am delivering this material at JavaOne 2014 as a two-hour tutorial. This should give me a little more bandwidth to dig a little deeper, especially on the JavaScript end. I finished off Java Day Taipei with my talk titled "Using NoSQL with ~JPA, EclipseLink and Java EE" (this was the last session of the conference). The talk covers an interesting gap that there is surprisingly little material on out there. The talk has three parts -- a birds-eye view of the NoSQL landscape, how to use NoSQL via a JPA centric facade using EclipseLink NoSQL, Hibernate OGM, DataNucleus, Kundera, Easy-Cassandra, etc and how to use NoSQL native APIs in Java EE via CDI. The slides for the talk are here: Using NoSQL with ~JPA, EclipseLink and Java EE from Reza Rahman The JPA based demo is available here, while the CDI based demo is available here. Both demos use MongoDB as the data store. Do let me know if you need help getting the demos up and running. After the event the Oracle University folks hosted a reception in the evening which was very well attended by organizers, speakers and local Java community leaders. I am extremely saddened by the fact that this otherwise excellent trip was scarred by terrible tragedy. After the conference I joined a few folks for a hike on the Maokong Mountain on Saturday. The group included friends in the Taiwanese Java community including Ian and Robbie Cheng. Without warning, fatal tragedy struck on a remote part of the trail. Despite best efforts by us, the excellent Taiwanese Emergency Rescue Team and World class Taiwanese physicians we were unable to save our friend Robbie Cheng's life. Robbie was just thirty-four years old and is survived by his younger brother, mother and father. Being the father of a young child myself, I can only imagine the deep sorrow that this senseless loss unleashes. Robbie was a key member of the Taiwanese Java community and a Java Evangelist at Sun at one point. Ironically the only picture I was able to take of the trail was mere moments before tragedy. I thought I should place him in that picture in profoundly respectful memoriam: Perhaps there is some solace in the fact that there is something inherently honorable in living a bright life, dying young and meeting one's end on a beautiful remote mountain trail few venture to behold let alone attempt to ascend in a long and tired lifetime. Perhaps I'd even say it's a fate I would not entirely regret facing if it were my own. With that thought in mind it seems appropriate to me to quote some lyrics from the song "Runes to My Memory" by legendary Swedish heavy metal band Amon Amarth idealizing a fallen Viking warrior cut down in his prime: "Here I lie on wet sand I will not make it home I clench my sword in my hand Say farewell to those I love When I am dead Lay me in a mound Place my weapons by my side For the journey to Hall up high When I am dead Lay me in a mound Raise a stone for all to see Runes carved to my memory" I submit my deepest condolences to Robbie's family and hope my next trip to Taiwan ends in a less somber note.

    Read the article

  • Lesi, from Graduate Trainee to Territory Manager

    - by Maria Sandu
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 It’s the final year, University is now coming to an end. A new chapter now awaits my arrival. This part of my life is called “Looking for a Job”. With no form of experience whatsoever, getting a job at a well renowned IT company is something that every IT student dreams about. CV: v, Application form: v, interviews: v. Acceptance Call, “Lesi I’m pleased to inform you that you have been accepted to be part of the Oracle Graduate Program for 2012”. Life would never again be the same. Being Part of the Graduate Program Going into the Graduate program, I felt like a baby seeing candy for the first time. The Program gave me the platform to not only break in to the workplace but also to help launch my career. Over the next 3 months, I went through various trainings / workshops / events / coaching / mentorship sessions. Like a construction worker building a solid foundation for a beautifully designed architecture, a clear path to build my career was set. With training out the way, it was now time to start working closely with my team. For the rest of the year, it was all about selling. Sales, Pipeline, Forecasting and numbers soon became the common words in my career. As the saying goes, “once a sales man, always a sales man”. There was no turning back now, a career in sales was the new hustle in my life. I worked closely with my mentor & coach (Ibrahim) who was heading up Zambia and Malawi. This was to be one of my best moments in the program as I started engaging with customers and getting some hands on experience in the field. By the end of the program all the experience, hard work, training and resources came in handy as I was now ready and fully groomed to be a sales rep. Life after the Graduate Program I’m proud to say that now I’m a Territory Manager, heading up Malawi, selling Technology, Middleware & Applications across all industries. I’m part of the Transition Cluster Team, a powerful team headed by the seasoned Senior Director. As a Territory Manager my role is to push for coverage, to penetrate the market by selling Oracle from end- to- end to all accounts in Malawi. I now spend my days living out of a suitcase, moving from hotel to hotel, chasing after business in all areas of Malawi. It’s the life of a Sales Man and I’m enjoying every minute of it. I’m truly fortunate and grateful to have been part of such a wonderful graduate program. I owe my Sales career to the graduate program, and I truly hope that the program will continue to develop and to groom new talent amongst the youth of this world. If you're interested in joining the Graduate Program in South Africa keep an eye on our CampusatOracle Facebook Page page to get the latest updates! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • What Counts for A DBA: Observant

    - by drsql
    When walking up to the building where I work, I can see CCTV cameras placed here and there for monitoring access to the building. We are required to wear authorization badges which could be checked at any time. Do we have enemies?  Of course! No one is 100% safe; even if your life is a fairy tale, there is always a witch with an apple waiting to snack you into a thousand years of slumber (or at least so I recollect from elementary school.) Even Little Bo Peep had to keep a wary lookout.    We nerdy types (or maybe it was just me?) generally learned on the school playground to keep an eye open for unprovoked attack from simpler, but more muscular souls, and take steps to avoid messy confrontations well in advance. After we’d apprehensively negotiated adulthood with varying degrees of success, these skills of watching for danger, and avoiding it,  translated quite well to the technical careers so many of us were destined for. And nowhere else is this talent for watching out for irrational malevolence so appropriate as in a career as a production DBA.   It isn’t always active malevolence that the DBA needs to watch out for, but the even scarier quirks of common humanity.  A large number of the issues that occur in the enterprise happen just randomly or even just one time ever in a spurious manner, like in the case where a person decided to download the entire MSDN library of software, cross join every non-indexed billion row table together, and simultaneously stream the HD feed of 5 different sporting events, making the network access slow while the corporate online sales just started. The decent DBA team, like the going, gets tough under such circumstances. They spring into action, checking all of the sources of active information, observes the issue is no longer happening now, figures that either it wasn’t the database’s fault and that the reboot of the whatever device on the network fixed the problem.  This sort of reactive support is good, and will be the initial reaction of even excellent DBAs, but it is not the end of the story if you really want to know what happened and avoid getting called again when it isn’t even your fault.   When fires start raging within the corporate software forest, the DBA’s instinct is to actively find a way to douse the flames and get back to having no one in the company have any idea who they are.  Even better for them is to find a way of killing a potential problem while the fires are small, long before they can be classified as raging. The observant DBA will have already been monitoring the server environment for months in advance.  Most troubles, such as disk space and security intrusions, can be predicted and dealt with by alerting systems, whereas other trouble can come out of the blue and requires a skill of observing ongoing conditions and noticing inexplicable changes that could signal an emerging problem.  You can’t automate the DBA, because the bankable skill of a DBA is in detecting the early signs of unexpected problems, and working out how to deal with them before anyone else notices them.    To achieve this, the DBA will check the situation as it is currently happening,  and in many cases is likely to have been the person who submitted the problem to the level 1 support person in the first place, just to let the support team know of impending issues (always well received, I tell you what!). Database and host computer settings, configurations, and even critical data might be profiled and captured for later comparisons. He’ll use Monitoring tools, built-in, commercial (Not to be too crassly commercial or anything, but there is one such tool is SQL Monitor) and lots of homebrew monitoring tools to monitor for problems and changes in the server environment.   You will know that you have it right when a support call comes in and you can look at your monitoring tools and quickly respond that “response time is well within the normal range, the query that supports the failing interface works perfectly and has actually only been called 67% as often as normal, so I am more than willing to help diagnose the problem, but it isn’t the database server’s fault and is probably a client or networking slowdown causing the interface to be used less frequently than normal.” And that is the best thing for any DBA to observe…

    Read the article

  • Android:How to display images from the in a ListView?

    - by Maxood
    Android:How to display images from the web in a ListView?I have the following code to display image from a URL in an ImageView: import java.io.IOException; import java.io.InputStream; import java.net.HttpURLConnection; import java.net.URL; import java.net.URLConnection; import android.app.ListActivity; import android.graphics.Bitmap; import android.graphics.BitmapFactory; import android.os.Bundle; import android.widget.ImageView; public class HttpImgDownload extends ListActivity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); Bitmap bitmap = // DownloadImage( // "http://www.streetcar.org/mim/cable/images/cable-01.jpg"); DownloadImage( "http://s.twimg.com/a/1258674567/images/default_profile_3_normal.png"); ImageView img = (ImageView) findViewById(R.id.img); img.setImageBitmap(bitmap); } private InputStream OpenHttpConnection(String urlString) throws IOException { InputStream in = null; int response = -1; URL url = new URL(urlString); URLConnection conn = url.openConnection(); if (!(conn instanceof HttpURLConnection)) throw new IOException("Not an HTTP connection"); try{ HttpURLConnection httpConn = (HttpURLConnection) conn; httpConn.setAllowUserInteraction(false); httpConn.setInstanceFollowRedirects(true); httpConn.setRequestMethod("GET"); httpConn.connect(); response = httpConn.getResponseCode(); if (response == HttpURLConnection.HTTP_OK) { in = httpConn.getInputStream(); } } catch (Exception ex) { throw new IOException("Error connecting"); } return in; } private Bitmap DownloadImage(String URL) { Bitmap bitmap = null; InputStream in = null; try { in = OpenHttpConnection(URL); bitmap = BitmapFactory.decodeStream(in); in.close(); } catch (IOException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } return bitmap; } } Now how can i display images in an array in a listview? Here's how i want to display the images: http://sites.google.com/site/androideyecontact/_/rsrc/1238086823282/Home/android-eye-contact-lite/eye_contact-list_view_3.png?height=420&width=279

    Read the article

  • CSS Transform offset varies with text length

    - by Mr. Polywhirl
    I have set up a demo that has 5 floating <div>s with rotated text of varying length. I am wondering if there is a way to have a CSS class that can handle centering of all text regardless of length. At the moment I have to create a class for each length of characters in my stylesheet. This could get too messy. I have also noticed that the offsets get screwd up is I increase or decrease the size of the wrapping <div>. I will be adding these classes to divs through jQuery, but I still have to set up each class for cross-browser compatibility. .transform3 { -webkit-transform-origin: 65% 100%; -moz-transform-origin: 65% 100%; -ms-transform-origin: 65% 100%; -o-transform-origin: 65% 100%; transform-origin: 65% 100%; } .transform4 { -webkit-transform-origin: 70% 110%; -moz-transform-origin: 70% 110%; -ms-transform-origin: 70% 110%; -o-transform-origin: 70% 110%; transform-origin: 70% 110%; } .transform5 { -webkit-transform-origin: 80% 120%; -moz-transform-origin: 80% 120%; -ms-transform-origin: 80% 120%; -o-transform-origin: 80% 120%; transform-origin: 80% 120%; } .transform6 { -webkit-transform-origin: 85% 136%; -moz-transform-origin: 85% 136%; -ms-transform-origin: 85% 136%; -o-transform-origin: 85% 136%; transform-origin: 85% 136%; } .transform7 { -webkit-transform-origin: 90% 150%; -moz-transform-origin: 90% 150%; -ms-transform-origin: 90% 150%; -o-transform-origin: 90% 150%; transform-origin: 90% 150%; } Note: The offset values I set were eye-balled. Update Although I would like this handled with a stylesheet, I believe that I will have to calculate the transformations of the CSS in JavaScript. I have created the following demo to demonstrate dynamic transformations. In this demo, the user can adjust the font-size of the .v_text class and as long as the length of the text does not exceed the .v_text_wrapper height, the text should be vertically aligned in the center, but be aware that I have to adjust the magicOffset value. Well, I just noticed that this does not work in iOS...

    Read the article

  • How to merge a "branch" that isn't really a branch (wasn't created by an svn copy)

    - by MatrixFrog
    I'm working on a team with lots of people who are pretty unfamiliar with the concepts of version control systems, and are just kind of doing whatever seems to work, by trial and error. Someone created a "branch" from the trunk that is not ancestrally related to the trunk. My guess is it went something like this: They created a folder in branches. They checked out all the code from the trunk to somewhere on their desktop. They added all that code to the newly created folder as though it was a bunch of brand new files. So the repository isn't aware that all that code is actually just a copy of the trunk. When I look at the history of that branch in TortoiseSVN, and uncheck the "Stop on copy/rename" box, there is no revision that has the trunk (or any other path) under the "Copy from path" column. Then they made lots of changes on their "branch". Meanwhile, others were making lots of changes on the trunk. We tried to do a merge and of course it doesn't work. Because, the trunk and the fake branch are not ancestrally related. I can see only two ways to resolve this: Go through the logs on the "branch", look at every change that was made, and manually apply each change to the trunk. Go through the logs on the trunk, look at every change that was made between revision 540 (when the "branch" was created) and HEAD, and manually apply each change to the "branch". This involves 7 revisions one way or 11 revisions the other way, so neither one is really that terrible. But is there any way to cause the repository to "realize" that the branch really IS ancestrally related even though it was created incorrectly, so that we can take advantage of the built-in merging functionality in Eclipse/TortoiseSVN? (You may be wondering: Why did your company hire these people and allow them to access the SVN repository without making sure they knew how to use it properly first?! We didn't -- this is a school assignment, which is a collaboration between two different classes -- the ones in the lower class were given a very quick hand-wavey "overview" of SVN which didn't really teach them anything. I've asked everyone in the group to please PLEASE read the svn book, and I'll make sure we (the slightly more experienced half of the team) keep a close eye on the repository to ensure this doesn't happen again.)

    Read the article

  • How to merge an improperly created "branch" that isn't really a branch (wasn't created by an svn cop

    - by MatrixFrog
    I'm working on a team with lots of people who are pretty unfamiliar with the concepts of version control systems, and are just kind of doing whatever seems to work, by trial and error. Someone created a "branch" from the trunk that is not ancestrally related to the trunk. My guess is it went something like this: They created a folder in branches. They checked out all the code from the trunk to somewhere on their desktop. They added all that code to the newly created folder as though it was a bunch of brand new files. So the repository isn't aware that all that code is actually just a copy of the trunk. When I look at the history of that branch in TortoiseSVN, and uncheck the "Stop on copy/rename" box, there is no revision that has the trunk (or any other path) under the "Copy from path" column. Then they made lots of changes on their "branch". Meanwhile, others were making lots of changes on the trunk. We tried to do a merge and of course it doesn't work. Because, the trunk and the fake branch are not ancestrally related. I can see only two ways to resolve this: Go through the logs on the "branch", look at every change that was made, and manually apply each change to the trunk. Go through the logs on the trunk, look at every change that was made between revision 540 (when the "branch" was created) and HEAD, and manually apply each change to the "branch". This involves 7 revisions one way or 11 revisions the other way, so neither one is really that terrible. But is there any way to cause the repository to "realize" that the branch really IS ancestrally related even though it was created incorrectly, so that we can take advantage of the built-in merging functionality in Eclipse/TortoiseSVN? (You may be wondering: Why did your company hire these people and allow them to access the SVN repository without making sure they knew how to use it properly first?! We didn't -- this is a school assignment, which is a collaboration between two different classes -- the ones in the lower class were given a very quick hand-wavey "overview" of SVN which didn't really teach them anything. I've asked everyone in the group to please PLEASE read the svn book, and I'll make sure we (the slightly more experienced half of the team) keep a close eye on the repository to ensure this doesn't happen again.)

    Read the article

  • merging UIImagePickerController image with cameraOverlayView

    - by GameDev
    Im really in the need for some help and advice. Spent the last week on this and have now just become frustrated as i cant get it to work! Basically, im trying to merge two images into one image to display/save. First the user picks an image from album, it goes to edit image screen where user can move and scale the image. On this screen is an overlay image (320x480) for the person to align there eyes in. Once aligned I want to save this image (edited and overlay) into one and pass the image onto my next screen. It works fine when the image is filling the edit/crop box, but when the image is widescreen with top and bottom not filling the box, then when i save the image the coords of the overlay dont get saved correctly! Heres my code, ive tried various ways of doing this but have failed at every attempt :( - (void) imagePickerController:(UIImagePickerController *)picker didFinishPickingMediaWithInfo:(NSDictionary *)info { // Access the cropped image from info dictionary UIImage *image = [info objectForKey:@"UIImagePickerControllerEditedImage"]; // Combine image with overlay before saving!! image = [self addOverlayToImage:image]; overlayGraphicView.image = nil; // Take the picture image to the post picture view controller postPictureView = [[PostPictureViewController alloc] init:image Company:companyName withLink:buyButtonLink]; [picker pushViewController:postPictureView animated:YES]; [picker release],picker = nil; } The problem is that the image picked (originalImage) could be of any height, my overlayImage is however always 320x480, its almost all transparent with just two eye images in center which i want to save over the original images eyes! - (UIImage*) addOverlayToImage:(UIImage*)originalImage { CGRect cgRect =[[UIScreen mainScreen] bounds]; CGSize size = cgRect.size; UIGraphicsBeginImageContext(size); [originalImage drawInRect:CGRectMake(0, 0, size.width, size.height)]; UIImage* overlayImage = [UIImage imageNamed:overlayGraphicName]; [(UIImage *)overlayImage drawInRect:CGRectMake(0, 0, size.width, size.height)]; UIImage *finalImage = UIGraphicsGetImageFromCurrentImageContext(); [finalImage retain]; UIGraphicsEndImageContext(); return finalImage; } I wish there was just an easy way to take a screenshot of whatever is in the edit crop box :( Please if someone could help me with this ASAP as I need to finish this in 1-2 days time! Thank you. EDIT:- I should also mention that with this I get the correct center of the screen and placement of the overlay on my next screen: [(UIImage *)overlayImage drawInRect:CGRectMake(0, 0, size.width, size.height)]; However, I am unable to work out the correct position of the main image especially as the height is different for every image if not fullscreen! I tried this to center it into the correct position but it doesnt work: [originalImage drawInRect:CGRectMake(0,(size.height/2 - originalImage.size.height/2), originalImage.size.width, originalImage.size.height)];

    Read the article

  • Classifying captured data in unknown format?

    - by monch1962
    I've got a large set of captured data (potentially hundreds of thousands of records), and I need to be able to break it down so I can both classify it and also produce "typical" data myself. Let me explain further... If I have the following strings of data: 132T339G1P112S 164T897F5A498S 144T989B9B223T 155T928X9Z554T ... you might start to infer the following: possibly all strings are 14 characters long the 4th, 8th, 10th and 14th characters may always be alphas, while the rest are numeric the first character may always be a '1' the 4th character may always be the letter 'T' the 14th character may be limited to only being 'S' or 'T' and so on... As you get more and more samples of real data, some of these "rules" might disappear; if you see a 15 character long string, then you have evidence that the 1st "rule" is incorrect. However, given a sufficiently large sample of strings that are exactly 14 characters long, you can start to assume that "all strings are 14 characters long" and assign a numeric figure to your degree of confidence (with an appropriate set of assumptions around the fact that you're seeing a suitably random set of all possible captured data). As you can probably tell, a human can do a lot of this classification by eye, but I'm not aware of libraries or algorithms that would allow a computer to do it. Given a set of captured data (significantly more complex than the above...), are there libraries that I can apply in my code to do this sort of classification for me, that will identify "rules" with a given degree of confidence? As a next step, I need to be able to take those rules, and use them to create my own data that conforms to these rules. I assume this is a significantly easier step than the classification, but I've never had to perform a task like this before so I'm really not sure how complex it is. At a guess, Python or Java (or possibly Perl or R) are possibly the "common" languages most likely to have these sorts of libraries, and maybe some of the bioinformatic libraries do this sort of thing. I really don't care which language I have to use; I need to solve the problem in whatever way I can. Any sort of pointer to information would be very useful. As you can probably tell, I'm struggling to describe this problem clearly, and there may be a set of appropriate keywords I can plug into Google that will point me towards the solution. Thanks in advance

    Read the article

  • Is it too early to start designing for Task Parallel Library?

    - by Joe Erickson
    I have been following the development of the .NET Task Parallel Library (TPL) with great interest since Microsoft first announced it. There is no doubt in my mind that we will eventually take advantage of TPL. What I am questioning is whether it makes sense to start taking advantage of TPL when Visual Studio 2010 and .NET 4.0 are released, or whether it makes sense to wait a while longer. Why Start Now? The .NET 4.0 Task Parallel Library appears to be well designed and some relatively simple tests demonstrate that it works well on today's multi-core CPUs. I have been very interested in the potential advantages of using multiple lightweight threads to speed up our software since buying my first quad processor Dell Poweredge 6400 about seven years ago. Experiments at that time indicated that it was not worth the effort, which I attributed largely to the overhead of moving data between each CPU's cache (there was no shared cache back then) and RAM. Competitive advantage - some of our customers can never get enough performance and there is no doubt that we can build a faster product using TPL today. It sounds fun. Yes, I realize that some developers would rather poke themselves in the eye with a sharp stick, but we really enjoy maximizing performance. Why Wait? Are today's Intel Nehalem CPUs representative of where we are going as multi-core support matures? You can purchase a Nehalem CPU with 4 cores which share a single level 3 cache today, and most likely a 6 core CPU sharing a single level 3 cache by the time Visual Studio 2010 / .NET 4.0 are released. Obviously, the number of cores will go up over time, but what about the architecture? As the number of cores goes up, will they still share a cache? One issue with Nehalem is the fact that, even though there is a very fast interconnect between the cores, they have non-uniform memory access (NUMA) which can lead to lower performance and less predictable results. Will future multi-core architectures be able to do away with NUMA? Similarly, will the .NET Task Parallel Library change as it matures, requiring modifications to code to fully take advantage of it? Limitations Our core engine is 100% C# and has to run without full trust, so we are limited to using .NET APIs.

    Read the article

  • I have a bunch of images being shown on click via JQuery - any easy way to animate this?

    - by Cenk
    This is the (quite simple) JS code I'm using: $(document).ready(function() { $(".button-list .next").click(function() { project = $(this).parents().filter(".projektweb").eq(0); currentimg = project.find(".images-list li.current"); nextimg = currentimg.next(); firstimg = project.find(".images-list li:first"); currentimg.removeClass("current"); if (nextimg.is("li")) nextimg.addClass("current"); else firstimg.addClass("current"); return false; }); $(".button-list .prev").click(function() { project = $(this).parents().filter(".projektweb").eq(0); currentimg = project.find(".images-list li.current"); previmg = currentimg.prev(); lastimg = project.find(".images-list li:last"); currentimg.removeClass("current"); if (previmg.is("li")) previmg.addClass("current"); else lastimg.addClass("current"); return false; }); }); And this is how the HTML code for the image list looks like: <ul class="images-list"> <li class="current"><img src="img/1.jpg" alt="" /></li> <li><img src="img/1b.jpg" alt="" /></li> </ul> <ul class="button-list"> <li><a class="button prev" href="#">?</a></li> <li><a class="button next" href="#">?</a></li></ul> The CSS: .images-list { height: 460px; list-style-type:none; float:left; width: 460px; overflow:hidden; position:relative; } .images-list img { height: 460px; width: 460px; display:block; } .images-list li { display:none; } .images-list li.current { display:block; } What I'd like to do is animate the images as they come and go - right now they just appear, which is OK but a bit more eye-candy would be nice. Can anyone help me out here? It it even possible to do it this way? Thanks!!

    Read the article

  • Matlab cell length

    - by AP
    Ok I seem to have got the most of the problem solved, I just need an expert eye to pick my error as I am stuck. I have a file of length [125 X 27] and I want to convert it to a file of length [144 x 27]. Now, I want to replace the missing files (time stamps) rows of zeros. (ideally its a 10 min daily average thus should have file length of 144) Here is the code I am using: fid = fopen('test.csv', 'rt'); data = textscan(fid, ['%s' repmat('%f',1,27)], 'HeaderLines', 1, 'Delimiter', ','); fclose(fid); %//Make time a datenum of the first column time = datenum(data{1} , 'mm/dd/yyyy HH:MM') %//Find the difference in minutes from each row timeDiff = round(diff(datenum(time)*(24*60))) %//the rest of the data data = cell2mat(data(2:28)); newdata=zeros(144,27); for n=1:length(timeDiff) if timeDiff(n)==10 newdata(n,:)=data(n,:); newdata(n+1,:)=data(n+1,:); else p=timeDiff(n)/10 n=n+p; end end Can somebody please help me to find the error inside my for loop. My output file seems to miss few timestamped values. %*********************************************************************************************************** Can somebody help me to figure out the uiget to read the above file?? i am replacing fid = fopen('test.csv', 'rt'); data = textscan(fid, ['%s' repmat('%f',1,27)], 'HeaderLines', 1, 'Delimiter', ','); fclose(fid); With [c,pathc]=uigetfile({'*.txt'},'Select the file','C:\data'); file=[pathc c]; file= textscan(c, ['%s' repmat('%f',1,27)], 'HeaderLines', 1, 'Delimiter', ','); And its not working % NEW ADDITION to old question p = 1; %index into destination for n = 1:length(timeDiff) % if timeDiff(n) == 10 % newfile(p,:) = file(n,:); % newfile(p+1,:)=file(n+1,:); % p = p + 1; % else % p = p + (timeDiff(n)/10); % end q=cumsum(timeDiff(n)/10); if q==1 newfile(p,:)=file(n,:); p=p+1; else p = p + (timeDiff(n)/10); end end xlswrite('testnewws11.xls',newfile); even with the cumsum command this code fails when my file has 1,2 time stamps in middle of long missing ones example 8/16/2009 0:00 5.34 8/16/2009 0:10 3.23 8/16/2009 0:20 2.23 8/16/2009 0:30 1.23 8/16/2009 0:50 70 8/16/2009 2:00 5.23 8/16/2009 2:20 544 8/16/2009 2:30 42.23 8/16/2009 3:00 71.23 8/16/2009 3:10 3.23 My output looks like 5.34 3.23 2.23 0 0 0 0 0 0 0 0 0 5.23 544. 42.23 0 0 0 3.23 Any ideas?

    Read the article

  • Is this BlockingQueue susceptible to deadlock?

    - by unforgiven3
    I've been using this code as a queue that blocks on Dequeue() until an element is enqueued. I've used this code for a few years now in several projects, all with no issues... until now. I'm seeing a deadlock in some code I'm writing now, and in investigating the problem, my 'eye of suspicion' has settled on this BlockingQueue<T>. I can't prove it, so I figured I'd ask some people smarter than me to review it for potential issues. Can you guys see anything that might cause a deadlock in this code? public class BlockingQueue<T> { private readonly Queue<T> _queue; private readonly ManualResetEvent _event; /// <summary> /// Constructor /// </summary> public BlockingQueue() { _queue = new Queue<T>(); _event = new ManualResetEvent(false); } /// <summary> /// Read-only property to get the size of the queue /// </summary> public int Size { get { int count; lock (_queue) { count = _queue.Count; } return count; } } /// <summary> /// Enqueues element on the queue /// </summary> /// <param name="element">Element to enqueue</param> public void Enqueue(T element) { lock (_queue) { _queue.Enqueue(element); _event.Set(); } } /// <summary> /// Dequeues an element from the queue /// </summary> /// <returns>Dequeued element</returns> public T Dequeue() { T element; while (true) { if (Size == 0) { _event.Reset(); _event.WaitOne(); } lock (_queue) { if (_queue.Count == 0) continue; element = _queue.Dequeue(); break; } } return element; } /// <summary> /// Clears the queue /// </summary> public void Clear() { lock (_queue) { _queue.Clear(); } } }

    Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34  | Next Page >