frank thornton - Page 29

FMw Diagnostic Framework : Automatic Capture of Diagnostic Data Upon First Failure!

- by Daniel Mortimer

Introduction There is nothing more frustrating than a problem that "cannot be reproduced". Logs, configuration files have been analysed but there just isn't enough information to establish the root cause. The issue maybe closed, but you are left with the feeling that the problem will raise its ugly head again in the future. Trouble is, to resolve such issues you need to capture diagnostic data at the exact time the incident occurs. Step forward Fusion Middleware Diagnostic Framework! Diagnostic Framework monitors WebLogic Managed Servers and delivers "Automatic capture of diagnostic data upon first failure". To quote fromOracle Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)Chapter 13 Diagnosing Problems "When a critical error occurs ... the Diagnostic Framework automatically collects diagnostics, such as thread dumps, DMS metric dumps, and WebLogic Diagnostics Framework (WLDF) server image dumps ... The data is stored in a file-based repository and is accessible with command-line utilities." In other words the data collected upon first failure - especially the thread and image dumps - provides a snapshot of the system as or immediately after the problem occurs. The table below shows the type of WebLogic Server issues which fall into the scope of Diagnostic Framework How to Configure Diagnostic Framework? Depending on your Fusion Middleware product choice you may not need to do anything! Diagnostic Framework is automatically installed, configured and initiated for any WebLogic Domain which has the Oracle Java Required Files (JRF) template applied. This template is applied by default whenever you configure WebLogic Managed Servers for products such as Portal / Forms / Reports / Discoverer Identity Management ( OID , OAM , OIM etc) WebCenter SOA Check your WebLogic Domain directory structure. If you have an "adr" sub directory under DOMAIN_HOME/servers/<servername>/ then JRF template has been applied and Diagnostic Framework will be in play. Should the "adr" sub directory not exist, review the advice given in My Oracle Support article How to Apply FMW ( EM ) Control and JRF to a WebLogic Domain and Managed Servers [ID 947043.1] If you are working with a standalone WebLogic Server solution and applying Oracle JRF is not acceptable, consider using WLDF - WebLogic Diagnostic Framework. (Fusion Middleware Diagnostic Framework makes use of WLDF under the covers.) Couple of useful links about WLDF are listed below Configuring and Using the Diagnostics Framework for Oracle WebLogic Server 11g WebLogic Diagnostics Framework-A Very Useful Tool [A nice blog which describes a WLDF use case] How to Get Started With Diagnostic Framework To be frank, the Fusion Middleware Administrator's Guide is the best place to start your learning Oracle Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)Chapter 13 Diagnosing Problems A lot of reading here, but if you are in hurry and just want to get the right information to Oracle Support to help resolve your issue, check out the next section below. How to Upload Diagnostic Framework Incident Data to Oracle Support Some Background Information There are three interfaces to the Repository: Enterprise Manager Cloud Control (Support Workbench) WLST (Command Line) ADRCI (Command Line) The Enterprise Manager Cloud Control does provide a nice GUI interface to search, view and package diagnostic framework incidents. However, this software is not to be confused with Fusion Middleware (EM) Control. Cloud Control (formerly known as Grid Control) is part of the Enterprise Manager media package. EM Cloud Control has it's own install and configuration story. Therefore, for the benefit of those yet to install and play with Cloud Control, I am going to describe how to use the command line tools. Ideally, you would only need to one command line interface, but currently I suggest using both - mainly due to the fact that ADRCI SHOW INCIDENTS does not reveal the description behind the Diagnostic Framework error code. Instructions: Note: WLST and ADRCI are case sensitive when it comes to handling parameter values. If you make a mistake, expect an unfriendly syntax error message. 1) Find the incident Note: The managed server which you are troubleshooting must be up and running. If the managed server is down, ensure the domain's Admin Server is accessible. If you cannot connect to the Admin Server or the Managed Server the example WLST commands will not work. a) Launch WLST Note: Use the WLST which resides in the "oracle_common" directory (not WL_HOME/common/bin) otherwise you will get a syntax error like the one below Traceback (innermost last): File "<console>", line 1, in ?NameError: listIncidents MW_HOME/oracle_common/common/bin/wlst.sh b) Connect to the managed server or the admin server e.g. wls:/offline> connect('weblogic','welcome1','t3://localhost:7020') c) Run the command wls:/MyDomain/serverConfig> listIncidents() This will list the incidents for the server to which you have connected. If you have connected to the Admin Server and want to list the incidents for a managed server within the domain, use the command wls:/MyDomain/serverConfig> listIncidents(adrHome='diag\ofm\MyDomain\MyManagedServer' ,server='MyManagedServer') Example output Incident Id Problem Key Incident Time 1 DFW-99998 [java.lang.NullPointerException] [oracle.error.simulator.ErrorSimulator.createNullPointerException][errorWebApp_1-0-0-0] Fri Nov 02 10:38:46 GMT 2012 The piece highlighted in bold is the description you do not see when using the ADRCI 'SHOW INCIDENT' command. Make a note of the incident id. You are ready to move to step 2 2. Package the incident a) Set up the environment - example commands below are for Unix cd <DOMAIN_HOME>/bin . ./setDomainEnv.sh If you want ADRCI to run a Remote Diagnostic Agent collection (recommended) at generate package time, point ORACLE_HOME at oracle_common ORACLE_HOME=$MW_HOME/oracle_common; export ORACLE_HOME To prevent ADRCI from running RDA at generate package time, point ORACLE_HOME at WL_HOME/server/adr directory. ORACLE_HOME=$WL_HOME/server/adr; export ORACLE_HOME b) Launch adrci $WL_HOME/server/adr/adrci c) Set BASE and HOMEPATH adrci> SET BASE /oracle/middleware/user_projects/domains/ mydomain/servers/mymanagedserver/adr adrci> SET HOMEPATH diag/ofm/mydomain/mymanagedserver d) Optionally run SHOW INCIDENTS e.g. adrci> SHOW INCIDENTS -MODE DETAIL ADR Home = /oracle/middleware/user_projects/domains/mydomain/ servers/mymanagedserver/adr/diag/ofm/mydomain/mymanagedserver:***********************************************************************************************************************************INCIDENT INFO RECORD 1********************************************************** INCIDENT_ID 1 STATUS ready CREATE_TIME 2012-11-02 10:38:46.468000 +00:00 PROBLEM_ID 1 CLOSE_TIME <NULL> FLOOD_CONTROLLED none ERROR_FACILITY DFW ERROR_NUMBER 99998 ERROR_ARG1 <NULL> ERROR_ARG2 <NULL> ERROR_ARG3 <NULL> ERROR_ARG4 <NULL> ERROR_ARG5 <NULL> ERROR_ARG6 <NULL> ERROR_ARG7 <NULL> ERROR_ARG8 <NULL> ERROR_ARG9 <NULL> ERROR_ARG10 <NULL> ERROR_ARG11 <NULL> ERROR_ARG12 <NULL> SIGNALLING_COMPONENT <NULL> SIGNALLING_SUBCOMPONENT <NULL> SUSPECT_COMPONENT <NULL> SUSPECT_SUBCOMPONENT <NULL> ECID 5162744c6a2eea5e:155ff445:13ac0aae7cb:-8000-0000000000000325 IMPACTS 01 rows fetched e) Create a logical package IPS CREATE PACKAGE INCIDENT incident_number e.g. adrci> IPS CREATE PACKAGE INCIDENT 1Created package 1 based on incident id 1, correlation level typical f) Generate the package IPS GENERATE PACKAGE package_number IN path e.g. adrci> IPS GENERATE PACKAGE 1 IN /tmp Generated package 1 in file /tmp/DFW99998j_20121102113633_COM_1.zip, mode complete Note: If the generate package command hangs, ADRCI may be experiencing an issue when running RDA. To avoid such trouble, exit ADRCI and point the ORACLE_HOME environment variable at WL_HOME/server/adr 3) Upload the package zip to Oracle Support via your Service Request a) Log into My Oracle Support and locate your Service Request b) Click on "Add Attachments c) And upload the zip file

Read the article

How to avoid the Portlet Skin mismatch

- by Martin Deh

here are probably many on going debates whether to use portlets or taskflows in a WebCenter custom portal application. Usually the main battle on which side to take in these debates are centered around which technology enables better performance. The good news is that both of my colleagues, Maiko Rocha and George Maggessy have posted their respective views on this topic so I will not have to further the discussion. However, if you do plan to use portlets in a WebCenter custom portal application, this post will help you not have the "portlet skin mismatch" issue. An example of the presence of the mismatch can be view from the applications log: The skin customsharedskin.desktop specified on the requestMap will be used even though the consumer's skin's styleSheetDocumentId on the requestMap does not match the local skin's styleSheetDocument's id. This will impact performance since the consumer and producer stylesheets cannot be shared. The producer styleclasses will not be compressed to avoid conflicts. A reason the ids do not match may be the jars are not identical on the producer and the consumer. For example, one might have trinidad-skins.xml's skin-additions in a jar file on the class path that the other does not have. Notice that due to the mismatch the portlet's CSS will not be able to be compressed, which will most like impact performance in the portlet's consuming portal. The first part of the blog will define the portlet mismatch and cover some debugging tips that can help you solve the portlet mismatch issue. Following that I will give a complete example of the creating, using and sharing a shared skin in both a portlet producer and the consumer application. Portlet Mismatch Defined In general, when you consume/render an ADF page (or task flow) using the ADF Portlet bridge, the portlet (producer) would try to use the skin of the consumer page - this is called skin-sharing. When the producer cannot match the consumer skin, the portlet would generate its own stylesheet and reference it from its markup - this is called mismatched-skin. This can happen because: The consumer and producer use different versions of ADF Faces, or The consumer has additional skin-additions that the producer doesn't have or vice-versa, or The producer does not have the consumer skin For case (1) & (2) above, the producer still uses the consumer skin ID to render its markup. For case (3), the producer would default to using portlet skin. If there is a skin mis-match then there may be a performance hit because: The browser needs to fetch this extra stylesheet (though it should be cached unless expires caching is turned off) The generated portlet markup uses uncompressed styles resulting in a larger markup It is often not obvious when a skin mismatch occurs, unless you look for either of these indicators: The log messages in the producer log, for example: The skin blafplus-rich.desktop specified on the requestMap will not be used because the styleSheetDocument id on the requestMap does not match the local skin's styleSheetDocument's id. It could mean the jars are not identical. For example, one might have trinidad-skins.xml's skin-additions in a jar file on the class path that the other does not have. View the portlet markup inside the iframe, there should be a <link> tag to the portlet stylesheet resource like this (note the CSS is proxied through consumer's resourceproxy): <link rel=\"stylesheet\" charset=\"UTF-8\" type=\"text/css\" href=\"http:.../resourceproxy/portletId...252525252Fadf%252525252Fstyles%252525252Fcache%252525252Fblafplus-rich-portlet-d1062g-en-ltr-gecko.css... Using HTTP monitoring tool (eg, firebug, httpwatch), you can see a request is made to the portlet stylesheet resource (see URL above) There are a number of reasons for mismatched-skin. For skin to match the producer and consumer must match the following configurations: The ADF Faces version (different versions may have different style selectors) Style Compression, this is defined in the web.xml (default value is false, i.e. compression is ON) Tonal styles or themes, also defined in the web.xml via context-params The same skin additions (jars with skin) are available for both producer and consumer. Skin additions are defined in the trinidad-skins.xml, using the <skin-addition> tags. These are then aggregated from all the jar files in the classpath. If there's any jar that exists on the producer but not the consumer, or vice veras, you get a mismatch. Debugging Tips Ensure the style compression and tonal styles/themes match on the consumer and producer, by looking at the web.xml documents for the consumer & producer applications It is bit more involved to determine if the jars match. However, you can enable the Trinidad logging to show which skin-addition it is processing. To enable this feature, update the logging.xml log level of both the producer and consumer WLS to FINEST. For example, in the case of the WebLogic server used by JDeveloper: $JDEV_USER_DIR/system<version number>/DefaultDomain/config/fmwconfig/servers/DefaultServer/logging.xml Add a new entry: <logger name="org.apache.myfaces.trinidadinternal.skin.SkinUtils" level="FINEST"/> Restart WebLogic. Run the consumer page, you should see the following logging in both the consumer and producer log files. Any entries that don't match is the cause of the mismatch. The following is an example of what the log will produce with this setting: [SRC_CLASS: org.apache.myfaces.trinidadinternal.skin.SkinUtils] [APP: WebCenter] [SRC_METHOD: _getMetaInfSkinsNodeList] Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/announcement-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/calendar-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/custComps-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/forum-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/page-service-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/peopleconnections-kudos-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/peopleconnections-wall-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/portlet-client-adf-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/rtc-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/serviceframework-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/smarttag-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.skin/in1ar8/APP-INF/lib/spaces-service-skins.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/oracle.webcenter.composer/3yo7j/WEB-INF/lib/custComps-skin.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/adf.oracle.domain.webapp/q433f9/WEB-INF/lib/adf-richclient-impl-11.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/adf.oracle.domain.webapp/q433f9/WEB-INF/lib/dvt-faces.jar!/META-INF/trinidad-skins.xml Processing skin URL:zip:/tmp/_WL_user/adf.oracle.domain.webapp/q433f9/WEB-INF/lib/dvt-trinidad.jar!/META-INF/trinidad-skins.xml The Complete Example The first step is to create the shared library. The WebCenter documentation covering this is located here in section 15.7. In addition, our ADF guru Frank Nimphius also covers this in hes blog. Here are my steps (in JDeveloper) to create the skin that will be used as the shared library for both the portlet producer and consumer. Create a new Generic Application Give application name (i.e. MySharedSkin) Give a project name (i.e. MySkinProject) Leave Project Technologies blank (none selected), and click Finish Create the trinidad-skins.xml Right-click on the MySkinProject node in the Application Navigator and select "New" In the New Galley, click on "General", select "File" from the Items, and click OK In the Create File dialog, name the file trinidad-skins.xml, and (IMPORTANT) give the directory path to MySkinProject\src\META-INF In the trinidad-skins.xml, complete the skin entry. for example: <?xml version="1.0" encoding="windows-1252" ?> <skins xmlns="http://myfaces.apache.org/trinidad/skin"> <skin> <id>mysharedskin.desktop</id> <family>mysharedskin</family> <extends>fusionFx-v1.desktop</extends> <style-sheet-name>css/mysharedskin.css</style-sheet-name> </skin> </skins> Create CSS file In the Application Navigator, right click on the META-INF folder (where the trinidad-skins.xml is located), and select "New" In the New Gallery, select Web-Tier-> HTML, CSS File from the the Items and click OK In the Create Cascading Style Sheet dialog, give the name (i.e. mysharedskin.css) Ensure that the Directory path is the under the META-INF (i.e. MySkinProject\src\META-INF\css) Once the new CSS opens in the editor, add in a style selector. For example, this selector will style the background of a particular panelGroupLayout: af|panelGroupLayout.customPGL{ background-color:Fuchsia; } Create the MANIFEST.MF (used for deployment JAR) In the Application Navigator, right click on the META-INF folder (where the trinidad-skins.xml is located), and select "New" In the New Galley, click on "General", select "File" from the Items, and click OK In the Create File dialog, name the file MANIFEST.MF, and (IMPORTANT) ensure that the directory path is to MySkinProject\src\META-INF Complete the MANIFEST.MF, where the extension name is the shared library name Manifest-Version: 1.1 Created-By: Martin Deh Implementation-Title: mysharedskin Extension-Name: mysharedskin.lib.def Specification-Version: 1.0.1 Implementation-Version: 1.0.1 Implementation-Vendor: MartinDeh Create new Deployment Profile Right click on the MySkinProject node, and select New From the New Gallery, select General->Deployment Profiles, Shared Library JAR File from Items, and click OK In the Create Deployment Profile dialog, give name (i.e.mysharedskinlib) and click OK In the Edit JAR Deployment dialog, un-check Include Manifest File option Select Project Output->Contributors, and check Project Source Path Select Project Output->Filters, ensure that all items under the META-INF folder are selected Click OK to exit the Project Properties dialog Deploy the shared lib to WebLogic (start server before steps) Right click on MySkin Project and select Deploy For this example, I will deploy to JDeverloper WLS In the Deploy dialog, select Deploy to Weblogic Application Server and click Next Choose IntegratedWebLogicServer and click Next Select Deploy to selected instances in the domain radio, select Default Server (note: server must be already started), and ensure Deploy as a shared Library radio is selected Click Finish Open the WebLogic console to see the deployed shared library The following are the steps to create a simple test Portlet Create a new WebCenter Portal - Portlet Producer Application In the Create Portlet Producer dialog, select default settings and click Finish Right click on the Portlets node and select New IIn the New Gallery, select Web-Tier->Portlets, Standards-based Java Portlet (JSR 286) and click OK In the General Portlet information dialog, give portlet name (i.e. MyPortlet) and click Next 2 times, stopping at Step 3 In the Content Types, select the "view" node, in the Implementation Method, select the Generate ADF-Faces JSPX radio and click Finish Once the portlet code is generated, open the view.jspx in the source editor Based on the simple CSS entry, which sets the background color of a panelGroupLayout, replace the <af:form/> tag with the example code <af:form> <af:panelGroupLayout id="pgl1" styleClass="customPGL"> <af:outputText value="background from shared lib skin" id="ot1"/> </af:panelGroupLayout> </af:form> Since this portlet is to use the shared library skin, in the generated trinidad-config.xml, remove both the skin-family tag and the skin-version tag In the Application Resources view, under Descriptors->META-INF, double-click to open the weblogic-application.xml Add a library reference to the shared skin library (note: the library-name must match the extension-name declared in the MANIFEST.MF): <library-ref> <library-name>mysharedskin.lib.def</library-name> </library-ref> Notice that a reference to oracle.webcenter.skin exists. This is important if this portlet is going to be consumed by a WebCenter Portal application. If this tag is not present, the portlet skin mismatch will happen. Configure the portlet for deployment Create Portlet deployment WAR Right click on the Portlets node and select New In the New Gallery, select Deployment Profiles, WAR file from Items and click OK In the Create Deployment Profile dialog, give name (i.e. myportletwar), click OK Keep all of the defaults, however, remember the Context Root entry (i.e. MyPortlet4SharedLib-Portlets-context-root, this will be needed to obtain the producer WSDL URL) Click OK, then OK again to exit from the Properties dialog Since the weblogic-application.xml has to be included in the deployment, the portlet must be deployed as a WAR, within an EAR In the Application dropdown, select Deploy->New Deployment Profile... By default EAR File has been selected, click OK Give Deployment Profile (EAR) a name (i.e. MyPortletProducer) and click OK In the Properties dialog, select Application Assembly and ensure that the myportletwar is checked Keep all of the other defaults and click OK For this demo, un-check the Auto Generate ..., and all of the Security Deployment Options, click OK Save All In the Application dropdown, select Deploy->MyPortletProducer In the Deployment Action, select Deploy to Application Server, click Next Choose IntegratedWebLogicServer and click Next Select Deploy to selected instances in the domain radio, select Default Server (note: server must be already started), and ensure Deploy as a standalone Application radio is selected The select deployment type (identifying the deployment as a JSR 286 portlet) dialog appears. Keep default radio "Yes" selection and click OK Open the WebLogic console to see the deployed Portlet The last step is to create the test portlet consuming application. This will be done using the OOTB WebCenter Portal - Framework Application. Create the Portlet Producer Connection In the JDeveloper Deployment log, copy the URL of the portlet deployment (i.e. http://localhost:7101/MyPortlet4SharedLib-Portlets-context-root Open a browser and paste in the URL. The Portlet information page should appear. Click on the WSRP v2 WSDL link Copy the URL from the browser (i.e. http://localhost:7101/MyPortlet4SharedLib-Portlets-context-root/portlets/wsrp2?WSDL) In the Application Resources view, right click on the Connections folder and select New Connection->WSRP Connection Give the producer a name or accept the default, click Next Enter (paste in) the WSDL URL, click Next If connection to Portlet is succesful, Step 3 (Specify Additional ...) should appear. Accept defaults and click Finish Add the portlet to a test page Open the home.jspx. Note in the visual editor, the orange dashed border, which identifies the panelCustomizable tag. From the Application Resources. select the MyPortlet portlet node, and drag and drop the node into the panelCustomizable section. A Confirm Portlet Type dialog appears, keep default ADF Rich Portlet and click OK Configure the portlet to use the shared skin library Open the weblogic-application.xml and add the library-ref entry (mysharedskin.lib.def) for the shared skin library. See create portlet example above for the steps Since by default, the custom portal using a managed bean to (dynamically) determine the skin family, the default trinidad-config.xml will need to be altered Open the trinidad-config.xml in the editor and replace the EL (preferenceBean) for the skin-family tag, with mysharedskin (this is the skin-family named defined in the trinidad-skins.xml) Remove the skin-version tag Right click on the index.html to test the application Notice that the JDeveloper log view does not have any reporting of a skin mismatch. In addition, since I have configured the extra logging outlined in debugging section above, I can see the processed skin jar in both the producer and consumer logs: <SkinUtils> <_getMetaInfSkinsNodeList> Processing skin URL:zip:/JDeveloper/system11.1.1.6.38.61.92/DefaultDomain/servers/DefaultServer/upload/mysharedskin.lib.def/[email protected]/app/mysharedskinlib.jar!/META-INF/trinidad-skins.xml

Read the article

top tweets WebLogic Partner Community – June 2012

- by JuergenKress

Send your tweets @wlscommunity #WebLogicCommunity and follow us at http://twitter.com/wlscommunity OTNArchBeat? Free Virtual Developer Day: Oracle ADF and Oracle Fusion Middleware Development http://bit.ly/MxuNAg AMIS, Oracle & Java? Checklist veearts nu ook op iPad. @amis_services Mobile integratie met Oracle Fusion Middleware http://dld.bz/buwsM #OSB #SOA WhitehorsesWhiteblog: Troubleshoot JVM crashes of Weblogic: CompilerThread (http://bit.ly/KcGzZK) Jon petter hjulstad E-vita is now Apps Grid Specialized! ODTUG Fusion Middleware Sessions RT @OTNArchBeat: ODTUG Kscope12 - June 24-28 - San Antonio, TX http://bit.ly/LlWkNV OTNArchBeat? Free Event: Modern #Java Development, in/outside the Enterprise - May 30 - Redwood Shores, CA http://bit.ly/LfB79a ADF Community DE? Oracle Advanced ADF 11g Partner Workshop Düsseldorf /Germany (english) June 26-29, click here to see Nicolas Lorain? Best Practices for #JavaFX 2 Enterprise Applications (Part Two) http://buff.ly/Lk1DBn by Jim Weaver shay shmeltzer? #Oracle Developers in #Israel - don't miss the free #ADF workshop July 2nd - get hands-on with Oracle ADF -here OTNArchBeat? Java at JAXconf | Tori Wieldt http://bit.ly/LdoLS2 Anand Akela? #Oracle Customers and Partners – Get your free pass to @CloudExpo in New York, June 11 to 14, http://goo.gl/RpYFT <- Stop by booth #511 OracleSupport_WLS? Did you know that since 3/15/12 #WebLogic Server 12.1.1.0 is certified for production with JDK 7? http://bit.ly/IYJE0L Sharat? Highly useful #JavaFX best practices blog by @JavaFXpert More details here ADF EMG How to set up a productive ADF Dev Env - discussion started by @baigsorcl. Click here to Read and comment. OracleSupport_WLS Upcoming #webcast: Diagnosing #weblogic performance issues through #java thread dumps http://bit.ly/M4O9qF My Oracle Support? New to Oracle Support? - Webcast on Support Basics webcast May 22 10:30 Central Europe. Register @ http://bit.ly/J8o0WG Mohamad Afshar? Cloud Expo – Oracle Customers and Partners – get your free pass to Cloud Expo in New York, June 11 to 14, http://goo.gl/RpYFT OTNArchBeat Oracle VM 3.1 is here | @Ronenkofman http://bit.ly/JriWTq Oracle Exalogic? RT @D0uglasPhillips: ExalogicTV New Video Introducing Oracle Secure Global Desktop for #Exalogic!! http://bit.ly/nwkrCu OracleBlogs? Java EE6 and WebLogic YouTube video channels http://ow.ly/1jVcYJ Oracle WebLogic RT @aleftik: Excited to spend some time today playing around with the WebSockets SDK http://bit.ly/NoTtri WebLogic Community Java EE6 and WebLogic YouTube video channels http://wp.me/p1LMIb-h0 OracleSupport_WLS New tutorial! How to use the #JMS #API to create a message producer with #GlassFish and #NetBeans http://bit.ly/Juqjn JDeveloper & ADF? Tip when installing JDeveloper 11.1.2.2.0 version http://dlvr.it/1b48s1 WebLogic Community Middleware Oracle Excellence Awards 2012 – HAPPY NEW YEAR! Click here to read WebLogicCommunity #opn #oracle#Specialization #opnaward Steven Davelaar? Improve performance of your ADF app using lazy, on-demand querying of detail view objects: Click here OracleBlogs? Middleware Oracle Excellence Awards 2012 & HAPPY NEW YEAR! http://ow.ly/1kahzZ OracleSupport_WLS Upgrading from #weblogic 9.2.x to 10.3.x? http://bit.ly/Kqzl9N AMIS, Oracle & Java “@JDeveloper: Logout from an ADF application http://dlvr.it/1fQBnm” WebLogic Community UK OUG call for papers–your middleware success! Click here #UKOUG #soacommunity #OPN Whitehorses Whiteblog: Enterprise Manager: Manage your Fusion Middleware logfiles (http://bit.ly/KQlZkR) WebLogic Community? @Jphjulstad HI Jon, should we send Pizza when you go in production with your WebLogic 12c project? Whish you success! #WebLogicCommunity Sabine Leitner ADF Einsteigerworkshops je 2 Tage im Juni in HAM, BLN, HANN #Oracle #WLS http://bit.ly/LcOIzB @OracleWebLogic @OracleAppGrid@soacommunity Andreas Koop new post Java Heap Monitor in JDeveloper http://bit.ly/LgSk85 Sabine Leitner? #Oracle Kundentag mit Vorträgen von Sparkasse, Schufa, LBBW, Allianz über FMW & Exa Lösungen! 21.06. FRA http://bit.ly/JtwE3v @wlscommunity NetBeans Team RT @chadlung: Installing and configuring #NetBeans 7.1.2 and the #Java JDK 1.7 on OS X: http://www.giantflyingsaucer.com/blog/p=3760 #osx WebLogic Community Happy New Year #WeblogicCommunity thanks for the business! Time for a drink http://pic.twitter.com/K34KFbvH WebLogic Community UK OUG call for papers–your middleware success! http://wp.me/p1LMIb-gU WebLogic Community? Middleware Oracle Excellence Awards 2012 - HAPPY NEW YEAR! http://wp.me/p1LMIb-h6 Oracle WebLogic? RT @wlscommunity: WebLogic World Record Two Processor Result with SPECjEnterprise2010 Benchmark Click here to read #weblogic #sunfire #li Marc? Relocate wlst script for all the logfiles in your domain @wlscommunity, http://tinyurl.com/btbjcco WebLogic Community WebLogic World Record Two Processor Result with SPECjEnterprise2010 Benchmark Click here #WebLogicCommunity #weblogic #sunfire Oracle WebLogic MIss a WebLogic Devcast webinar? Catch any of the replays in the series on-demand! #WebLogic #JavaEE #coherence http://bit.ly/LNGa4p JDeveloper & ADF? Bean DataControl - Edit table records http://dlvr.it/1ZWqCx Justin Kestelyn? Contents of "Virtual Developer Day: Java SE 7 and JavaFX 2.0" are now avail on demand; no reg http://tinyurl.com/78nxnyo Frank Nimphius? Preparing 12c new features for DOAG 2012 Development - June 14th in Bonn (http://development.doag.org) WebLogic Community? Middleware Oracle Excellence Awards 2012–HAPPY NEW YEAR! http://wp.me/p1LMIb-he JDeveloper & ADF Placeholder Watermarks with ADF 11.1.2 http://dlvr.it/1ZWDc9 Oracle ACE Program? May edition #ACE newsletter now available online. http://bit.ly/LKA2de chriscmuir New blog post: Which JDeveloper is right for me? http://bit.ly/J8sj9e GlassFish? Transactional Interceptors in Java EE 7 - Request for feedback: Linda described how EJB's container-managed tr http://bit.ly/KKuGNJ OracleEnterpriseMgr Oracle Application Testing Suite 12.1 Debuts at StarEast 2012 http://ow.ly/aXcv8 #em12c JAX London First set of speaker session announced for #JAXLondon see: http://bit.ly/L0HSME OTNArchBeat? Oracle Cloud Conference: dates and locations worldwide http://bit.ly/JgNeID NetBeans Team? Video: Create and debug a TestNG test class in #NetBeans IDE: http://ow.ly/b7NEW NetBeans Team #NetBeans tip: Code Template for #Kohana #PHP Framework: http://ow.ly/aWIvY Robin? Started to use the #Oracle #WebLogic Server #Maven Plugin. Really awesome to install a complete #WLS with "mvn wls:install" !@wlscommunity OTNArchBeat? Free Event: Modern #Java Development, in/outside the Enterprise - May 30 - Redwood Shores, CA http://bit.ly/JIN9tf OracleBlogs WebLogic Partner Community Newsletter May 2012 http://ow.ly/1k5TeG Java Certification? Java SE 7 Fundamentals course now available On Demand. Watch a preview now: http://ow.ly/aWYgD Whitehorses Whiteblog: Native IO in WebLogic on Solaris 11 X64 (http://bit.ly/KGM4mp) NetBeans Team? Quick video of FindBugs Integration in #NetBeans IDE 7.2: http://ow.ly/aNece NetBeans Team #JavaFX Scene Builder Docs Updated for 2.2 and #NetBeans 7.2 dev builds: http://ow.ly/b7Nie Duncan Mills? New blog posting on implementing input field watermarks with ADF Faces 11.1.2 Click here #adf WebLogic Community? WebLogic Partner Community Newsletter May 2012 http://wp.me/p1LMIb-h4 OracleBlogs? UK OUG call for papersyour middleware success! http://ow.ly/1jNs49 Nicolas Lorain? Java tip: Deploying #JavaFX apps to multiple environments - JavaWorld http://buff.ly/KDADvu Adam Bien? Java EE and How to Specify The Unconventional With Convention Over Configuration [Free Article]: The free http://bit.ly/JEUkUf Owen Hughes and team?#Oracle #Exalogic #Performance: What? How? Why? Click here GlassFish? SecuritEE in the Cloud: Java EE 7 and the Cloud theme continue to move full steam ahead. In a PaaS environment http://bit.ly/K2RPte JDeveloper & ADF? How to Align Managed Bean Scope and Bean Data Control in Oracle ADF http://dlvr.it/1dngxQ Andrejus Baranovskis Missing New Feature in JDev (11.1.2.2.0) - ADF Methods Security http://fb.me/1jQM1enls OracleSupport_WLS? Tutorial on managing #HTTP Sessions in a #Weblogic #Cluster http://bit.ly/JshESe Oracle WebLogic? ZeroTurnaround developer report: #Spring keeps getting heavier, and #Java EE keeps getting lighter http://bit.ly/JDmKy2 JDeveloper & ADF? How to Search in Views - Part 4 || Oracle ADF http://dlvr.it/1dpDjZ WebLogic Community Java Message Service with Java and Spring Framework on Oracle WebLogic; Webcast May 15th 2012 http://wp.me/p1LMIb-gS Andreas Koop? new post ADF Bug or Feature? Non-Breaking Space outside required icon style http://bit.ly/KDZnUo Oracle WebLogic? Don't miss this month's WebLogic DevCast: WebLogic JMS and Spring JMS http://bit.ly/J6g2ST Tuesday May 15th 10:00am PT JDeveloper & ADF How To Disable SELECT COUNT Execution for ADF Table Rendering http://dlvr.it/1dqKH6 OracleSupport_WLS? #SSL and security has its own Information Center, http://bit.ly/LP8Vil for troubleshooting, install, config and more NetBeans Team? Featured #NetBeans plugin is @Codename_One for creating native apps for major mobile platforms: http://plugins.netbeans.org/ JDeveloper & ADF? Using JDeveloper HTTP Analyser to intercept/forward requests http://dlvr.it/1Yzl4J Nicolas Lorain? Create native looks for JavaFX applications: JavaFX-CSS-Themes · http://buff.ly/M0jel0 by Gregg Setzer Devoxx? Want to make the world a better place? Then get involved in Random Hacks of Kindness on June 2 - 3 in Belgium @ http://www.rhok.be #RHoK WebLogic Community top tweets WebLogic Partner Community – May 2012 Click here #WebLogicCommunity Michel Schildmeijer Oracle Traffic Director 11g http://lnkd.in/-mm3Vy Andrejus Baranovskis? Proactively Monitoring JDeveloper 11g IDE Heap Memory http://fb.me/16YZErPrx Arun Gupta? 80+ attendees building a #javaee6 application using NetBeans/WebLogic at Java Day, Istanbul fun times! http://pic.twitter.com/odY19daW A. Chatziantoniou? Just registered for the Oracle FMW Summer Camp in Lisbon. Looking forward to learn, meet friends and try to buy ice cream on the beach OTNArchBeat Another Myth Debunked: 200 Continuous Redeployments with WebLogic|@munz http://bit.ly/JiPyM7 Oracle WebLogic? Need to learn more on #WebLogic Server #JVM performance tuning? http://bit.ly/MN UxHx GlassFish? Dukes Choice Awards 2012 Nominations Are Open: 2012 Duke's Choice Award are open for nominations. These awards http://bit.ly/Ksk4U3 Justin Kestelyn? Major cloud-related announcements from Larry Ellison and Mark Hurd on June 6 http://bit.ly/KTJiII Nicolas Lorain Transparent Windows (Stage) with #JavaFX 2 : Adam Bien's Weblog http://j.mp/INgq8K WebLogic Community Web Services with JAX and Spring on WebLogic–Webcast May 30th 2012 #WebLogicCommunity #weblogic #opn JDeveloper & ADF Oracle ADF - How to work with Dates http://dlvr.it/1Y70zw OracleBlogs Web Services with JAX and Spring on WebLogicWebcast May 30th 2012 http://ow.ly/1k2WtO Adam Bien? Summer Java EE Workshops: 23.05, Amsterdam Airport Java EE Hacking, Without Airport. The dutch version of Airport http://bit.ly/JeP6hV JDeveloper & ADF ADF 11g: BC4J or EJB3. http://bit.ly/JVVFZF ADF EMG? Great discussion with JSF guru Andy Schwartz on the forum - 38 posts! Check it out: here Devoxx? Oracle (http://www.oracle.com ) joins Devoxx 2012 as the first Premium partner, welcome aboard! Nicolas Lorain Developing a Simple Todo Application using #JavaFX, #Java and #MongoDB- Part-1JavaBeat http://j.mp/IDGxLA Nicolas Lorain Preview of JavaFX 2.2 canvas feature > Harmonic Code: Death bitmaps could be beautiful... Part I http://buff.ly/KyAXg5 #JavaFX OTNArchBeat?? New York Coherence Special Interest Group (NYCSIG) - May 24 - NYC http://bit.ly/JzJcbT WebLogic Community iAS upgrade to WebLogic watch #C2B2 online seminar http://youtu.be/5m2CNUjBIGQ #WebLogicCommunity Ruth Collett? Join Oracle in #Joburg on May 21 for OTN Developer Day - sessions on #Java #JavaEE 6/7 and much more! http://bit.ly/IENwnD WebLogic Community? Sending out invitations to our advanced Fusion Middleware Summer Camps! Want to learn more register for the community Ruth Collett? Join @ArunGupta in Istanbul this Monday to hear the latest on #JavaEE 6/7 http://bit.ly/Je63cc GlassFish? NetBeans 7.2 Beta - Built for Speed, Deploy Apps to Oracle Cloud: NetBeans 7.2 Beta is now available. The http://bit.ly/LxMMTK Lucas Jellema My latest SlideShare upload : Java ain't scary - introducing Java to PL/SQ. here via @slideshare JDeveloper & ADF? #Developer #free#ADF training in #Scotland - June 13. More information: http://bit.ly/LbPLlf AMIS, Oracle & Java? AMIS behaalt als eerste in Nedeland de Oracle ADF specialisatie - Channelworld nieuwsChannelconnect: http://bit.ly/JzAcB4 WebLogic Community Web Services with JAX and Spring on WebLogic–Webcast May 30th 2012 http://wp.me/p1LMIb-gX Nicolas Lorain?@ JavaFX-based SimpleDateFormat Demonstrator http://j.mp/KFCVOi #JavaFX via Dustin Marx Oracle Exalogic? Are you an Oracle partner? There's news on the Oracle Partner Network about #Exalogic specializations - http://bit.ly/Mt3ANY JDeveloper & ADF Shorter URL for your ADF application http://dlvr.it/1XqNLY OTNArchBeat? Bay Area Coherence Special Interest Group (BACSIG) Meeting June 7 http://bit.ly/JAa0Lx OTNArchBeat? Java EE 6 Sample Application on WebLogic 12c: Conference Planner | @arungupta http://bit.ly/LPvof4 JDeveloper & ADF? Excellent example of Oracle ADF - Google Maps/Earth integration http://dlvr.it/1cbc80 JDeveloper & ADF Setting Up JDeveloper's Embedded WLS for MySQL http://dlvr.it/1c4b8P JDeveloper & ADF? Solution for Sharing Global User Data in ADF BC http://dlvr.it/1cc7SJ Java? Java Magazine May/June #javaee #javafx #javame #openJDK #hotspot #wicket #lotsmore http://ow.ly/aX07v Oracle WebLogic? http://bit.ly/JxQsnS if you have trouble finding the right #patchset when doing an upgrade to your #weblogic server OracleEnterpriseMgr 15 minutes to go before we start our Application Testing Suite 12.1 webcast. http://bit.ly/JHyTEe Learn from the lead PM what's new. #em12c Sten Vesterli Eating your own dog food - Oracle support site finally in ADF: http://lnkd.in/s6hg_p Adam Bien Project: "Jenever" (=poison) checked-in with GIT:here CU at http://workshops.adam-bien.com. Thanks for attending! OTNArchBeat Web Service Development with NetBeans and Testing with WebLogic Admin Console | @munz http://bit.ly/JcWk34 Please feel free to send us your news! And add your blog to our SOA blog wiki

Read the article

SOA Community Newsletter: nouvelle lettre !

- by mseika

SOA PARTNER COMMUNITY NEWSLETTERAUGUST 2012 Dear SOA partner community member Have you submitted your feedback on SOA Partner Community Survey 2012? This is the last chance to participate in the survey. We recommend you to complete the survey and help us to improve our SOA Community. Thanks to all attendees and trainers for their participation in the excellent Fusion Middleware Summer Camps held in Lisbon and Munich. I would also like to thank you for the great feedback and the nice reports provided by AMIS Technology Blog & Middleware by Link Consulting. Most of our courses have been overbooked, if you did not get a chance or missed it, we offer a wide range of online training and the course material. Key take-away from the advanced BPM course is to become an expert in ADF. Here is the course from Grant Ronald Learn Advanced ADF online available. The Link Consulting Team became experts in SOA Governance with EAMS and Oracle Enterprise Repository! We always encourage our community members to share their best practices and are very keen to publish it. Please let us know if you want to share your best practices through this medium.We encourage you to make use of the Specialization benefits - this month we are giving an opportunity to Promote Your SOA & BPM Events. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Presentations & Training material OFM Summer CampsPromote Your SOA & BPM Events Advanced ADF Online, For Free By Grant BPM 11g Customer Stories & Solution Catalog & Process Accelerators Delivering SOA Governance with EAMS by Link Consulting Team WebLogic Server Provisioning and Patching News from our Partners & CommunityUpdated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum SOA Workspace PRESENTATIONS & TRAINING MATERIAL OFM SUMMER CAMPS Thanks to all attendees who invested their time and utilized the opportunity to attend the Summer Camps! Due to high demand of our most of the trainings, we had a long waiting list with more numbers of partners who are keen to attend it. We would like to give our special thanks to all trainers, who delivered excellent workshops! Most of the presentations and course material have been posted on our SOA Community Workspaceand WebLogic Community Workspace. You can access the content only if you are a registered community member. To register for the SOA Community please click here. You can register for the WebLogic Community here. To find out the first impressions of the event please visit our Facebook pages:www.facebook.com/WebLogicCommunity &www.facebook.com/soacommunity or Picasa AlbumThanks for the excellent blog posts from AMIS Technology Blog & Middleware by Link Consulting. Let us know if you published a twitter blog on@soacommunity & @wlscommunity. We will be pleased to publish it in our Newsletters. BPM Course Quotes “Its always easy, if you know, what you are doing” - Torsten Winterberg, Opitz“ The best ideas are the ideas from the best” - Filipe Sequeria, Primesoft “Best invest in the education in the last 12 months” - Richard Schaller, IPT “Practice best practice with the best instructor” - Graham Lamond Capgemini “If you have basic BPM knowledge, this is the course to really mater it” - Diogo Henriques Link Consulting “Very good trainers lot of work. Lot of fun as well” - Matthias Gris Workflow Factory “If you like to accelerate in Oracle come to the training to bring it all together” - Marcel van der Glind, Amis ADF Course Quotes "Excellent training, great opportunity to network!" - Frank Houweling, Amis "Lots of fun and good ideas" - Ana Santiago, GFI "Learn ADF, worth it Fusion Apps is the future" - Miguel Delgadillo, STO Consulting "The best way to learn Fusion Middleware from the #1" Alexandro Montantes, STO Consulting "Be advanced to to be the first” - Dimitar Petrov Fadata "Great opportunity to suck all the knowledge out of some very experienced product managers” - Wilfred von der Deijl, The Future Group WebLogic Course Quotes “Oracle trainings are the best” - Pedro Neto Novobas“ "Excellent training, well organized” - Pedro Antunh, Capgemini “This course dives you into Oracle WebLogic giving you a quick start on benefiting from Fusion Apps” - Leonardo Fernandes, Outsystems Additional Quotes “Thanks a lot again for organizing such a great and informative Summer Camp. Both training and networking were organized very professionally. I have gained tons of very useful Info, which will definitely help to increase quality of our future projects.” - Daniel Fasko fss-group.com I didn’t get the chance yesterday to thank you for a most enjoyable and thoroughly educational time I had in Munich over the last few days.” - Jeroen Bakker Ordina “Just to congratulate you on a great event, not only today but also in the previous days of training. As we know, a very good organization and, as a native Portuguese that knows Lisbon very good, a nice choice of places to visit. Looking forward to come again next year.” Pedro Miguel Neto, Novobase PROMOTE YOUR SOA & BPM EVENTS The Partner Event Publisher has just been made available to all SOA & BPM specialized partners in EMEA. Partners now have the opportunity to publish their events to theOracle.com/events site and spread the word on their upcoming live in-person and/or live webcast events. See the demo below and click here to read more information. ADVANCED ADF ONLINE, FOR FREE BY GRANT The second part of the advanced ADF online eCourse is Live now! This covers the advanced topics of region and region interaction as well as getting down and dirty with some of the layout features of ADF Faces, skinning and DVT components. The aim of this course is to give you a self-paced learning aid which covers the more advanced topics of ADF development. The content is developed by Product Management and our Curriculum development teams and is based on advanced training material we have been running internally for about 18 months. We will get started on the next chapter, but in the meantime, please have a look at chapters one and two. Back to top BPM 11G CUSTOMER STORIES & SOLUTION CATALOG & PROCESS ACCELERATORS Stories Everyone loves a good story on planning or implementing a BPM strategy. Everyone wants to hear how it was done before?, what worked?, what was achieved? If you have achieved success with BPM, we are very keen to hear your stories and examples of how your customers use it. We receive lots of requests from people who are thinking of using BPM to solve a specific problem or in combination with a specific technology to talk to someone who has done it before. These stories are invaluable. Drop down the details of anything you think is relevant with a bit of detail and we will follow up on it. As one good deed deserves another, we will do our best to give you stories if you need them to show that where you are going, others have treaded before. Send your stories to us using this e-mail link and we will share them among other like minded people. Solution Catalogue This summer, Oracle is launching a solution catalogue specifically intended for partners. If you have delivered a successful implementation in BPM and think it could be reused and applied again in a similar scenario in the same industry or in a similar environment, then we ware keen to know about it and will add it to the solution catalogue. The solution catalogue will showcase successful BPM solutions both inside and outside Oracle. Be in touch with us on this e-mail link and we will make sure to add your solution. Process AcceleratorsFinally if you have specific processes that you are expert on, you have implemented at a customer and you want to work with us on getting these productised, then we would love to know about it. The process accelerator programme is explained in the most recent SOA/BPM Community Newsletter but again feel free to contact us if you want to get involved. Good luck with BPM and let us know how we can help. Barry O'Reilly Director BPM [email protected] DELIVERING SOA GOVERNANCE WITH EAMS BY LINK CONSULTING TEAM In the last 12 years Link Consulting has been making its presence in specific areas such as Governance and Architecture, both in terms of practices and methodologies, products, know-how and technological expertise. The Enterprise Architecture Management System - Oracle Enterprise Edition (EAMS - OER Edition) is the result of this experience and combines the architecture management solution with OER in order to deliver a product specialized for SOA Governance that gathers the better of two worlds in solution that enables SOA Governance projects, initiatives and programs. Enterprise Architecture Management System Enterprise Architecture Management System (EAMS), is an automation based solution that enables the efficient management of Enterprise Architectures. The solution uses configured enterprise repositories and takes advantages of its features to provide automation capabilities to the users. EAMS provides capabilities to create/customize/analyze repository data, architectural blueprints, reports and analytic charts. Oracle Enterprise Repository Oracle Enterprise Repository (OER) is one of the major and central elements of the Oracle SOA Governance solution. Oracle Enterprise Repository provides the tools to manage and govern the metadata for any type of software asset, from business processes and services to patterns, frameworks, applications, components, and models. OER maps the relationships and inter-dependencies that connect those assets to improve impact analysis, promote and optimize their reuse, and measure their impact on the bottom line. It provides the visibility, feedback, controls, and analytics to keep your SOA on track to deliver business value. The intense focus on automation helps to overcome barriers to SOA adoption and streamline governance throughout the lifecycle. Core capabilities of the OER include: Asset Management Asset Lifecycle Management Usage Tracking Service Discovery Version Management Dependency Analysis Portfolio Management EAMS - OER Edition The solution takes the advantages and features from both products and combines them in a symbiotic tool that enhances the quality of SOA Governance Initiatives and Programs. EAMS is able to produce a vast number of outputs by combining its analytical engine, SOA-specific configurations and the assets in OER and other related tools, catalogs and repositories. The configurations encompass not only the extendable parametrization of the metadata but also fully configurable blueprints, PowerPoint reports, charts and queries. The SOA blueprints The solution comes with a set of predefined architectural representations that help the organization better perceive their SOA landscape. More blueprints can be easily created in order to accommodate the organizations needs in terms of detail, audience and metadata. Charts & Dashboards The solution encompasses a set of predefined charts and dashboards that promote a more agile way to control and explore the assets. Time Based Visualization All representations are time bound, and with EAMS - OER you can truly govern SOA with a complete view of the Past, Present and Future; The solution delivers Gap Analysis, a project oriented approach while taking into consideration the As-Was, As-Is an To-Be. Time based visualization differentiating factors: Extensive automation and maintenance of architectural representations Organization wide solution. Easy access and navigation to and between all architectural artifacts and representations. Flexible meta-model, customization and extensibility capabilities. Lifecycle management and enforcement of the time dimension over all the repository content. Profile based customization. Comprehensive visibility Architectural alignment Friendly and striking user interfaces For more information on EAMS visit us here. For more information on SOA visit us here. WEBLOGIC SERVER PROVISIONING AND PATCHING For access to the Oracle demo systems please visit OPN and talk to your Partner Expert.SOA Suite and BPM Suite runs on WebLogic! We are pleased to announce the availability of a WebLogic Server Management demo that showcases some of the key provisioning and patching capabilities of WebLogic Server Management Pack Enterprise Edition (EE). To learn more about these features - as well as other features of the pack - please visit the pack's saleskit page.Demo Highlights The demo showcases the following capabilities: Patching Oracle WebLogic Servers Standardizing WebLogic Server Patch Rollouts Creating a WebLogic Domain Provisioning Profile Cloning a WebLogic Domain from a Provisioning Profile Deploying a Java EE Application Scaling Out an Oracle WebLogic Cluster Demo Instructions Go to the DSS website for Oracle Partners. On the Standard Demo Launchpad page, under the “Software Lifecycle Automation” section, click on the link “EM Cloud Control 12c WLS Provisioning and Patching” (tagged as “NEW”). Specific demo launchpad page contains a link to the detailed demo script with instructions on how to show the demo.

Read the article

Java Generics, JPA 2, J2EE, JSF 2, GWT, Ajax, Oracle's Java Strategies, Flex, iPhone, Agile ALM, Gra

- by Kim Won

Great Indian Developer Summit 2010 – India's Biggest Polyglot Conference and Workshops for IT Software Professionals Bangalore, April 9, 2010: The GIDS.Java Conference and Workshops has announced the complete program of over 50 sessions on the present and future of the Java language and VM, how they are evolving to meet the community's ever-changing needs, and some of the cutting-edge tools, technologies & techniques used for building robust enterprise Java applications today. The GIDs.Java track at Great Indian Developer Summit takes place 22 and 23 April 2010, at the Indian Institute of Science in Bangalore. As one of the longest running independent developer conferences in India, GIDS.Java at the Great Indian Developer Summit 2010 is uniquely positioned to provide a blend of practical, pragmatic and immediately applicable knowledge and a glimpse of the future of technology. During 22 and 23 April 2010, GIDS.Java offers a multi-track conference, workshops, expo show floor, and networking opportunities. The first keynote at GIDS.Java "Pointy Haired Bosses and Pragmatic Programmers" is led by Dr. Venkat Subramaniam. He speaks about how each of us has a professional responsibility to be objective and make decisions that will help us and our teams be productive and deliver results. Venkat will pick on some fallacies, lay down facts, and discuss how to stay professional and objective in our daily efforts. The second keynote of the day explains the practical features that make the Cloud so interesting, and why everyone should start using it in their everyday life. Simone Brunozzi, Amazon Web Services Technology Evangelist, will detail technical examples, business details all mixed with a lot of Italian humor to ensure audience enjoy this talk without a single line of code. The third keynote of the day gives an exciting overview of directions in the Java space for Oracle, featuring concrete signs of Oracles heavy investment, a clear concise strategy overview, and deep dives into some of the most interesting pieces of technology being developed in the Java Platform Group today; such as JavaEE, JDK7, JavaFX, and our exciting new visual tools. Featuring demos by a Java evangelism team star, Simon Ritter, this talk takes you top to bottom in Java Technology. Featured talks at GID.Web include: Good, Bad, and Ugly of Java Generics, Venkat Subramaniam Pure Java Ajax: An Overview of GWT 2.0, Marty Hall How JPA 2.0 Makes a Good Thing Even Better, Mike Keith Building Enterprise RIAs with Adobe Flex and Java, Sujit Reddy G Integrated Ajax Support in JSF 2.0, Marty Hall Design Patterns in Java and Groovy, Venkat Subramaniam A Gentle Introduction to iPhone and Obj-C for Java Developers, Matthew McCullough Cloud Computing: Azure for Java Developers, Janakiram MSV Ajax Support in the Prototype JavaScript Library, Marty Hall First steps to IT Heaven Through the Cloud. Part III: .Java, Simone Brunozi Building Web 2.0 User Interfaces for Web Service Models using JSF, Frank Nimphius and Jobinesh P Acceptance Test Driven Development, John Tobin and Mohammed Mohsinali Architecting Your Java Applications for the Cloud, Praveen Srivatsa Effective Java, Venkat Subramaniam The Amazing Groovy Weight-loss Plan, Scott Davis Enterprise Modeling - from Conceptual Planning to Technical Blueprints, J Sripad Java Collections Renaissance, Donald Raab and Vlad Zakharov Power 7 and IBM J9VM, Himanshu Goyal A Whistle-stop Tour of Maven 3.0, Matthew McCullough Mass Volume Opportunities for Java Developers, Jouko Nuottila Emerging Technology Complex Event Processing, Duvvuri Srinivas Agile ALM for Distributed Development, Karthi Swaminathan Dim Sum Grails - A Sampler of Practical Non Database-Driven Grails Applications, Scott Davis Diagnosing Performance Bottlenecks in J2EE, Deepak Kaul Business Driven Identity Management, Suneet Agera Combining Java EE with OSGi using Eclipse Gemini, Mike Keith Workshop: Essence of Functional Programming, Venkat Subramaniam Workshop: Agile Development, Tools, and Teams and Scrum Certification, Stephen Forte Workshop: Cloud Computing Boot Camp on the Google App Engine, Matthew McCullough Workshop: Building Your First Amazon App, Simone Brunozzi Workshop: The 180-min AJAX and JSON Spike Class, Scott Davis Workshop: PHP + Adobe Flex = Killer RIA, Shyamprasad P Workshop: User Expereince Evaluation Model Walkthrough, Sanna Häiväläinen Workshop: Building Data Centric Applications using Adobe Flex and Java, Prashant Singh Workshop: Monetizing your Apps with PayPal X Payments Platform, Khurram Khan, Praveen Alavilli Sponsors of Great Indian Developer Summit 2010 include: Platinum sponsors Microsoft, Oracle Forum Nokia and Adobe; Gold sponsors Intel and SAP; Silver sponsors Quest Software, PayPal, Telerik and AMT. About Great Indian Developer Summit Great Indian Developer Summit is the gold standard for India's software developer ecosystem for gaining exposure to and evaluating new projects, tools, services, platforms, languages, software and standards. Packed with premium knowledge, action plans and advise from been-there-done-it veterans, creators, and visionaries, the 2010 edition of Great Indian Developer Summit features focused sessions, case studies, workshops and power panels that will transform you into a force to reckon with. Featuring 3 co-located conferences: GIDS.NET, GIDS.Web, GIDS.Java and an exclusive day of in-depth tutorials - GIDS.Workshops, from 20 April to 24 April at the IISc campus in Bangalore. At GIDS you'll participate in hundreds of sessions encompassing the full range of Microsoft computing, Java, Agile, RIA, Rich Web, open source/standards, languages, frameworks and platforms, practical tutorials that deep dive into technical skill and best practices, inspirational keynote presentations, an Expo Hall featuring dozens of the latest projects and products activities, engaging networking events, and the interact with the best and brightest of speakers from around the world. For further information on GIDS 2010, please visit the summit on the web http://www.developersummit.com/ A Saltmarch Media Press Release E: [email protected] Ph: +91 80 4005 1000

Read the article

C# LINQ XML Query with duplicate element names that have attributes

- by ncain187

<Party id="Party_1"> <PartyTypeCode tc="1">Person</PartyTypeCode> <FullName>John Doe</FullName> <GovtID>123456789</GovtID> <GovtIDTC tc="1">Social Security Number US</GovtIDTC> <ResidenceState tc="35">New Jersey</ResidenceState> <Person> <FirstName>Frank</FirstName> <MiddleName>Roberts</MiddleName> <LastName>Madison</LastName> <Prefix>Dr.</Prefix> <Suffix>III</Suffix> <Gender tc="1">Male</Gender> <BirthDate>1974-01-01</BirthDate> <Age>35</Age> <Citizenship tc="1">United States of America</Citizenship> </Person> <Address> <AddressTypeCode tc="26">Bill Mailing</AddressTypeCode> <Line1>2400 Meadow Lane</Line1> <Line2></Line2> <Line3></Line3> <Line4></Line4> <City>Somerset</City> <AddressStateTC tc="35">New Jersey</AddressStateTC> <Zip>07457</Zip> <AddressCountryTC tc="1">United States of America</AddressCountryTC> </Address> </Party>    <Party id="Party_2"> <PartyTypeCode tc="1">Person</PartyTypeCode> <FullName>Dollie Robert Madison</FullName> <GovtID>123956239</GovtID> <GovtIDTC tc="1">Social Security Number US</GovtIDTC> <Person> <FirstName>Dollie</FirstName> <MiddleName>R</MiddleName> <LastName>Madison</LastName> <Suffix>III</Suffix> <Gender tc="2">Female</Gender> <BirthDate>1996-10-12</BirthDate> <Citizenship tc="1">United States of America</Citizenship> </Person>  <Address> <AddressTypeCode tc="26">Bill Mailing</AddressTypeCode> <Line1>2400 Meadow Lane</Line1> <City>Somerset</City> <AddressStateTC tc="35">New Jersey</AddressStateTC> <Zip>07457</Zip> <AddressCountryTC tc="1">United States of America</AddressCountryTC> </Address> <Risk>  <DisabilityEffectiveStartDate>2006-01-01</DisabilityEffectiveStartDate>  <DisabilityEffectiveStopDate>2008-01-01</DisabilityEffectiveStopDate> </Risk> </Party>    <Party id="Party_3"> <PartyTypeCode tc="2">Organization</PartyTypeCode> <Organization> <DTCCMemberCode>1234</DTCCMemberCode> </Organization> <Carrier> <CarrierCode>105</CarrierCode> </Carrier> </Party> Here is my code which doesn't work because party 3 doesn't contain FullName, I know that partyelements contains 3 parties if I only return the name attribute. Is there a way to loop through each tag seperate? var partyElements = from party in xmlDoc.Descendants("Party") select new { Name = party.Attribute("id").Value, PartyTypeCode = party.Element("PartyTypeCode").Value, FullName = party.Element("FullName").Value, GovtID = party.Element("GovtID").Value, };

Read the article

Why I can't implement this simple CSS

- by nXqd

<!DOCTYPE html> <html lang="en"> <head> <title>Enjoy BluePrint</title> <link rel="stylesheet" href="css/blueprint/screen.css" type="text/css" media="screen, projection"> <link rel="stylesheet" href="css/blueprint/print.css" type="text/css" media="print">   <script type="text/css"> h1.logo { width:181px; height:181px; background: url("img/logo.png"); text-indent: -9999px; } </script> </head> <body> <div class="container">  <div id="header" class="span-24"> <div id="logo" class="span-6"> <h1 class="logo">This is my site</h1> </div> <div id="script" class="span-10"> <p>Frank Chimero is a graphic designer, illustrator, teac`her, maker, writer, thinker-at-large in Portland, Oregon.</p> </div> <div id="contact" class="span-8 last"> contact </div> </div>  <div id="main-content" class="span-12"> <h3>DISCOVERY</h3> <p>My fascination with the creative process, curiosity, and visual experience informs all of my work in some way. Each piece is the part of an exploration in finding wit, surprise, honesty, and joy in the world around us, then, trying to document those things with all deliberate speed before they vanish.</p><br/> <p>Our creative output can have a myriad intended outcomes: to inform, to persuade or sell, or delight. There are many other creative people who do well in servicing the needs to inform or persuade, but there are not many out there who have taken up the mantle of delighting people. I’ll try my best.</p><br/> <p>It’s not about pretty; it is about beauty. Beauty in form, sure, but also beauty in the fit of a bespoke idea that transcends not only the tasks outlined, but also fulfilling the objectives that caused the work to be produced in the first place.</p><br/> <p>The best creative work connects us by speaking to what we share. From that, we hope to make things that will last. Work made without staying power and lasting relevance leads to audiences that are fickle, strung along on a diet of crumbs.</p><br/> <p>The work should be nourishing in some way, both while a creative person is making it, but also while someone consumes it. When I think of all my favorite books, movies, art and albums, they all make me a little less alone and a little more sentient. Perhaps that is what making is for: to document the things that make us feel most alive.</p> </div>  <div id="award" class="span-4"> Awards </div> <div id="right-sidebar" class="span-8 last"> Right sidebar </div> </div> </body> </html> I'm 100% sure the code works, and I can't replace image at h1.logo . I try to use live-editing CSS tool and it works fine . Thanks for reading :)

Read the article

West Wind WebSurge - an easy way to Load Test Web Applications

- by Rick Strahl

A few months ago on a project the subject of load testing came up. We were having some serious issues with a Web application that would start spewing SQL lock errors under somewhat heavy load. These sort of errors can be tough to catch, precisely because they only occur under load and not during typical development testing. To replicate this error more reliably we needed to put a load on the application and run it for a while before these SQL errors would flare up. It’s been a while since I’d looked at load testing tools, so I spent a bit of time looking at different tools and frankly didn’t really find anything that was a good fit. A lot of tools were either a pain to use, didn’t have the basic features I needed, or are extravagantly expensive. In the end I got frustrated enough to build an initially small custom load test solution that then morphed into a more generic library, then gained a console front end and eventually turned into a full blown Web load testing tool that is now called West Wind WebSurge. I got seriously frustrated looking for tools every time I needed some quick and dirty load testing for an application. If my aim is to just put an application under heavy enough load to find a scalability problem in code, or to simply try and push an application to its limits on the hardware it’s running I shouldn’t have to have to struggle to set up tests. It should be easy enough to get going in a few minutes, so that the testing can be set up quickly so that it can be done on a regular basis without a lot of hassle. And that was the goal when I started to build out my initial custom load tester into a more widely usable tool. If you’re in a hurry and you want to check it out, you can find more information and download links here: West Wind WebSurge Product Page Walk through Video Download link (zip) Install from Chocolatey Source on GitHub For a more detailed discussion of the why’s and how’s and some background continue reading. How did I get here? When I started out on this path, I wasn’t planning on building a tool like this myself – but I got frustrated enough looking at what’s out there to think that I can do better than what’s available for the most common simple load testing scenarios. When we ran into the SQL lock problems I mentioned, I started looking around what’s available for Web load testing solutions that would work for our whole team which consisted of a few developers and a couple of IT guys both of which needed to be able to run the tests. It had been a while since I looked at tools and I figured that by now there should be some good solutions out there, but as it turns out I didn’t really find anything that fit our relatively simple needs without costing an arm and a leg… I spent the better part of a day installing and trying various load testing tools and to be frank most of them were either terrible at what they do, incredibly unfriendly to use, used some terminology I couldn’t even parse, or were extremely expensive (and I mean in the ‘sell your liver’ range of expensive). Pick your poison. There are also a number of online solutions for load testing and they actually looked more promising, but those wouldn’t work well for our scenario as the application is running inside of a private VPN with no outside access into the VPN. Most of those online solutions also ended up being very pricey as well – presumably because of the bandwidth required to test over the open Web can be enormous. When I asked around on Twitter what people were using– I got mostly… crickets. Several people mentioned Visual Studio Load Test, and most other suggestions pointed to online solutions. I did get a bunch of responses though with people asking to let them know what I found – apparently I’m not alone when it comes to finding load testing tools that are effective and easy to use. As to Visual Studio, the higher end skus of Visual Studio and the test edition include a Web load testing tool, which is quite powerful, but there are a number of issues with that: First it’s tied to Visual Studio so it’s not very portable – you need a VS install. I also find the test setup and terminology used by the VS test runner extremely confusing. Heck, it’s complicated enough that there’s even a Pluralsight course on using the Visual Studio Web test from Steve Smith. And of course you need to have one of the high end Visual Studio Skus, and those are mucho Dinero ($$$) – just for the load testing that’s rarely an option. Some of the tools are ultra extensive and let you run analysis tools on the target serves which is useful, but in most cases – just plain overkill and only distracts from what I tend to be ultimately interested in: Reproducing problems that occur at high load, and finding the upper limits and ‘what if’ scenarios as load is ramped up increasingly against a site. Yes it’s useful to have Web app instrumentation, but often that’s not what you’re interested in. I still fondly remember early days of Web testing when Microsoft had the WAST (Web Application Stress Tool) tool, which was rather simple – and also somewhat limited – but easily allowed you to create stress tests very quickly. It had some serious limitations (mainly that it didn’t work with SSL), but the idea behind it was excellent: Create tests quickly and easily and provide a decent engine to run it locally with minimal setup. You could get set up and run tests within a few minutes. Unfortunately, that tool died a quiet death as so many of Microsoft’s tools that probably were built by an intern and then abandoned, even though there was a lot of potential and it was actually fairly widely used. Eventually the tools was no longer downloadable and now it simply doesn’t work anymore on higher end hardware. West Wind Web Surge – Making Load Testing Quick and Easy So I ended up creating West Wind WebSurge out of rebellious frustration… The goal of WebSurge is to make it drop dead simple to create load tests. It’s super easy to capture sessions either using the built in capture tool (big props to Eric Lawrence, Telerik and FiddlerCore which made that piece a snap), using the full version of Fiddler and exporting sessions, or by manually or programmatically creating text files based on plain HTTP headers to create requests. I’ve been using this tool for 4 months now on a regular basis on various projects as a reality check for performance and scalability and it’s worked extremely well for finding small performance issues. I also use it regularly as a simple URL tester, as it allows me to quickly enter a URL plus headers and content and test that URL and its results along with the ability to easily save one or more of those URLs. A few weeks back I made a walk through video that goes over most of the features of WebSurge in some detail: Note that the UI has slightly changed since then, so there are some UI improvements. Most notably the test results screen has been updated recently to a different layout and to provide more information about each URL in a session at a glance. The video and the main WebSurge site has a lot of info of basic operations. For the rest of this post I’ll talk about a few deeper aspects that may be of interest while also giving a glance at how WebSurge works. Session Capturing As you would expect, WebSurge works with Sessions of Urls that are played back under load. Here’s what the main Session View looks like: You can create session entries manually by individually adding URLs to test (on the Request tab on the right) and saving them, or you can capture output from Web Browsers, Windows Desktop applications that call services, your own applications using the built in Capture tool. With this tool you can capture anything HTTP -SSL requests and content from Web pages, AJAX calls, SOAP or REST services – again anything that uses Windows or .NET HTTP APIs. Behind the scenes the capture tool uses FiddlerCore so basically anything you can capture with Fiddler you can also capture with Web Surge Session capture tool. Alternately you can actually use Fiddler as well, and then export the captured Fiddler trace to a file, which can then be imported into WebSurge. This is a nice way to let somebody capture session without having to actually install WebSurge or for your customers to provide an exact playback scenario for a given set of URLs that cause a problem perhaps. Note that not all applications work with Fiddler’s proxy unless you configure a proxy. For example, .NET Web applications that make HTTP calls usually don’t show up in Fiddler by default. For those .NET applications you can explicitly override proxy settings to capture those requests to service calls. The capture tool also has handy optional filters that allow you to filter by domain, to help block out noise that you typically don’t want to include in your requests. For example, if your pages include links to CDNs, or Google Analytics or social links you typically don’t want to include those in your load test, so by capturing just from a specific domain you are guaranteed content from only that one domain. Additionally you can provide url filters in the configuration file – filters allow to provide filter strings that if contained in a url will cause requests to be ignored. Again this is useful if you don’t filter by domain but you want to filter out things like static image, css and script files etc. Often you’re not interested in the load characteristics of these static and usually cached resources as they just add noise to tests and often skew the overall url performance results. In my testing I tend to care only about my dynamic requests. SSL Captures require Fiddler Note, that in order to capture SSL requests you’ll have to install the Fiddler’s SSL certificate. The easiest way to do this is to install Fiddler and use its SSL configuration options to get the certificate into the local certificate store. There’s a document on the Telerik site that provides the exact steps to get SSL captures to work with Fiddler and therefore with WebSurge. Session Storage A group of URLs entered or captured make up a Session. Sessions can be saved and restored easily as they use a very simple text format that simply stored on disk. The format is slightly customized HTTP header traces separated by a separator line. The headers are standard HTTP headers except that the full URL instead of just the domain relative path is stored as part of the 1st HTTP header line for easier parsing. Because it’s just text and uses the same format that Fiddler uses for exports, it’s super easy to create Sessions by hand manually or under program control writing out to a simple text file. You can see what this format looks like in the Capture window figure above – the raw captured format is also what’s stored to disk and what WebSurge parses from. The only ‘custom’ part of these headers is that 1st line contains the full URL instead of the domain relative path and Host: header. The rest of each header are just plain standard HTTP headers with each individual URL isolated by a separator line. The format used here also uses what Fiddler produces for exports, so it’s easy to exchange or view data either in Fiddler or WebSurge. Urls can also be edited interactively so you can modify the headers easily as well: Again – it’s just plain HTTP headers so anything you can do with HTTP can be added here. Use it for single URL Testing Incidentally I’ve also found this form as an excellent way to test and replay individual URLs for simple non-load testing purposes. Because you can capture a single or many URLs and store them on disk, this also provides a nice HTTP playground where you can record URLs with their headers, and fire them one at a time or as a session and see results immediately. It’s actually an easy way for REST presentations and I find the simple UI flow actually easier than using Fiddler natively. Finally you can save one or more URLs as a session for later retrieval. I’m using this more and more for simple URL checks. Overriding Cookies and Domains Speaking of HTTP headers – you can also overwrite cookies used as part of the options. One thing that happens with modern Web applications is that you have session cookies in use for authorization. These cookies tend to expire at some point which would invalidate a test. Using the Options dialog you can actually override the cookie: which replaces the cookie for all requests with the cookie value specified here. You can capture a valid cookie from a manual HTTP request in your browser and then paste into the cookie field, to replace the existing Cookie with the new one that is now valid. Likewise you can easily replace the domain so if you captured urls on west-wind.com and now you want to test on localhost you can do that easily easily as well. You could even do something like capture on store.west-wind.com and then test on localhost/store which would also work. Running Load Tests Once you’ve created a Session you can specify the length of the test in seconds, and specify the number of simultaneous threads to run each session on. Sessions run through each of the URLs in the session sequentially by default. One option in the options list above is that you can also randomize the URLs so each thread runs requests in a different order. This avoids bunching up URLs initially when tests start as all threads run the same requests simultaneously which can sometimes skew the results of the first few minutes of a test. While sessions run some progress information is displayed: By default there’s a live view of requests displayed in a Console-like window. On the bottom of the window there’s a running total summary that displays where you’re at in the test, how many requests have been processed and what the requests per second count is currently for all requests. Note that for tests that run over a thousand requests a second it’s a good idea to turn off the console display. While the console display is nice to see that something is happening and also gives you slight idea what’s happening with actual requests, once a lot of requests are processed, this UI updating actually adds a lot of CPU overhead to the application which may cause the actual load generated to be reduced. If you are running a 1000 requests a second there’s not much to see anyway as requests roll by way too fast to see individual lines anyway. If you look on the options panel, there is a NoProgressEvents option that disables the console display. Note that the summary display is still updated approximately once a second so you can always tell that the test is still running. Test Results When the test is done you get a simple Results display: On the right you get an overall summary as well as breakdown by each URL in the session. Both success and failures are highlighted so it’s easy to see what’s breaking in your load test. The report can be printed or you can also open the HTML document in your default Web Browser for printing to PDF or saving the HTML document to disk. The list on the right shows you a partial list of the URLs that were fired so you can look in detail at the request and response data. The list can be filtered by success and failure requests. Each list is partial only (at the moment) and limited to a max of 1000 items in order to render reasonably quickly. Each item in the list can be clicked to see the full request and response data: This particularly useful for errors so you can quickly see and copy what request data was used and in the case of a GET request you can also just click the link to quickly jump to the page. For non-GET requests you can find the URL in the Session list, and use the context menu to Test the URL as configured including any HTTP content data to send. You get to see the full HTTP request and response as well as a link in the Request header to go visit the actual page. Not so useful for a POST as above, but definitely useful for GET requests. Finally you can also get a few charts. The most useful one is probably the Request per Second chart which can be accessed from the Charts menu or shortcut. Here’s what it looks like: Results can also be exported to JSON, XML and HTML. Keep in mind that these files can get very large rather quickly though, so exports can end up taking a while to complete. Command Line Interface WebSurge runs with a small core load engine and this engine is plugged into the front end application I’ve shown so far. There’s also a command line interface available to run WebSurge from the Windows command prompt. Using the command line you can run tests for either an individual URL (similar to AB.exe for example) or a full Session file. By default when it runs WebSurgeCli shows progress every second showing total request count, failures and the requests per second for the entire test. A silent option can turn off this progress display and display only the results. The command line interface can be useful for build integration which allows checking for failures perhaps or hitting a specific requests per second count etc. It’s also nice to use this as quick and dirty URL test facility similar to the way you’d use Apache Bench (ab.exe). Unlike ab.exe though, WebSurgeCli supports SSL and makes it much easier to create multi-URL tests using either manual editing or the WebSurge UI. Current Status Currently West Wind WebSurge is still in Beta status. I’m still adding small new features and tweaking the UI in an attempt to make it as easy and self-explanatory as possible to run. Documentation for the UI and specialty features is also still a work in progress. I plan on open-sourcing this product, but it won’t be free. There’s a free version available that provides a limited number of threads and request URLs to run. A relatively low cost license removes the thread and request limitations. Pricing info can be found on the Web site – there’s an introductory price which is $99 at the moment which I think is reasonable compared to most other for pay solutions out there that are exorbitant by comparison… The reason code is not available yet is – well, the UI portion of the app is a bit embarrassing in its current monolithic state. The UI started as a very simple interface originally that later got a lot more complex – yeah, that never happens, right? Unless there’s a lot of interest I don’t foresee re-writing the UI entirely (which would be ideal), but in the meantime at least some cleanup is required before I dare to publish it :-). The code will likely be released with version 1.0. I’m very interested in feedback. Do you think this could be useful to you and provide value over other tools you may or may not have used before? I hope so – it already has provided a ton of value for me and the work I do that made the development worthwhile at this point. You can leave a comment below, or for more extensive discussions you can post a message on the West Wind Message Board in the WebSurge section Microsoft MVPs and Insiders get a free License If you’re a Microsoft MVP or a Microsoft Insider you can get a full license for free. Send me a link to your current, official Microsoft profile and I’ll send you a not-for resale license. Send any messages to [email protected]. Resources For more info on WebSurge and to download it to try it out, use the following links. West Wind WebSurge Home Download West Wind WebSurge Getting Started with West Wind WebSurge Video© Rick Strahl, West Wind Technologies, 2005-2014Posted in ASP.NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

how to put result in the end using jquery

- by Martty Rox

my code is : html with the js in section please ch3eck it out i need to prodeuce the result of the form of five questions and display it in the last section of the page where am i going wrong am using innerhtml js thing to produce the result in the last section <div id="section1"> <script type="text/javascript"> function changeText2(){ alert("working"); var count1=0; var a=document.forms["myForm"]["drop1"].value; var b=document.forms["myForm"]["drop2"].value; alert(document.forms["myForm"]["drop2"].value); var c=document.forms["myForm"]["drop3"].value; var d=document.forms["myForm"]["drop4"].value; var e=document.forms["myForm"]["drop5"].value; var f=document.forms["myForm"]["drop6"].value; if(a===2) { count1++; alert(count1); } else { alert("lit"); } if(b===2) { count1++; } else { alert("lit"); } if(c===2) { count1++; } else { alert("lit"); } if(d===2) { count1++; } else { alert("lit"); } if(e===2) { count1++; } else alert("lit"); } alert(count1); document.getElementById('boldStuff2').innerHTML = count1; </script> <form name="myForm"> <p>1)  Who won the 1993 “King of the Ring”?</p> <div> <select id="f1" name="drop1"> <option value="0" selected="selected">-- Select -- </option> <option value="1">Owen Hart </option> <option value="2">Bret Hart </option> <option value="3">Edge </option> <option value="4">Mabel </option> </select> </div>  <p>2)  What NHL goaltender has the most career wins?</p> <div> <select id="f2" name="drop2"> <option value="0" selected="selected">-- Select -- </option> <option value="1">Grant Fuhr </option> <option value="2">Patrick Roy </option> <option value="3">Chris Osgood </option> <option value="4">Mike Vernon</option> </select> </div>  <p>3)  What Major League Baseball player holds the record for all-time career high batting average?</p> <div> <select id="f3" name="drop3"> <option value="0" selected="selected">-- Select -- </option> <option value="1">Ty Cobb </option> <option value="2">Larry Walker </option> <option value="3">Jeff Bagwell </option> <option value="4">Frank Thomas</option> </select> </div>  <p>4)  Who among the following is NOT associated with billiards in India?</p> <div> <select id="f4" name="drop4" > <option value="0" selected="selected">-- Select -- </option> <option value="1">Subash Agrawal </option> <option value="2">Ashok Shandilya </option> <option value="3">Manoj Kothari </option> <option value="4">Mihir Sen</option> </select> </div>  <p>5)  Which cricketer died on the field in Bangladesh while playing for Abahani Club?</p> <div> <select id="f5" name="drop5" > <option value="0" selected="selected">-- Select -- </option> <option value="1">Subhash Gupte</option> <option value="2">M.L.Jaisimha</option> <option value="3">Lala Amarnath</option> <option value="4">Raman Lamba</option> </select> </div>  <a href="#services" class="page_nav_btn next"><input type='button' onclick='changeText2()' value='NEXT'/></a> </form> </div> <div id="section2"> </div> ... <div id="results"> <b id='boldStuff2'>fff ggg</b> </div> need to display the results of each section at the last div as shown in script... js for first section not working plz some help me where am i going wrong....

Read the article

fatal error C1014: too many include files : depth = 1024

- by numerical25

I have no idea what this means. But here is the code that it supposely is happening in. //======================================================================================= // d3dApp.cpp by Frank Luna (C) 2008 All Rights Reserved. //======================================================================================= #include "d3dApp.h" #include <stream> LRESULT CALLBACK MainWndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam) { static D3DApp* app = 0; switch( msg ) { case WM_CREATE: { // Get the 'this' pointer we passed to CreateWindow via the lpParam parameter. CREATESTRUCT* cs = (CREATESTRUCT*)lParam; app = (D3DApp*)cs->lpCreateParams; return 0; } } // Don't start processing messages until after WM_CREATE. if( app ) return app->msgProc(msg, wParam, lParam); else return DefWindowProc(hwnd, msg, wParam, lParam); } D3DApp::D3DApp(HINSTANCE hInstance) { mhAppInst = hInstance; mhMainWnd = 0; mAppPaused = false; mMinimized = false; mMaximized = false; mResizing = false; mFrameStats = L""; md3dDevice = 0; mSwapChain = 0; mDepthStencilBuffer = 0; mRenderTargetView = 0; mDepthStencilView = 0; mFont = 0; mMainWndCaption = L"D3D10 Application"; md3dDriverType = D3D10_DRIVER_TYPE_HARDWARE; mClearColor = D3DXCOLOR(0.0f, 0.0f, 1.0f, 1.0f); mClientWidth = 800; mClientHeight = 600; } D3DApp::~D3DApp() { ReleaseCOM(mRenderTargetView); ReleaseCOM(mDepthStencilView); ReleaseCOM(mSwapChain); ReleaseCOM(mDepthStencilBuffer); ReleaseCOM(md3dDevice); ReleaseCOM(mFont); } HINSTANCE D3DApp::getAppInst() { return mhAppInst; } HWND D3DApp::getMainWnd() { return mhMainWnd; } int D3DApp::run() { MSG msg = {0}; mTimer.reset(); while(msg.message != WM_QUIT) { // If there are Window messages then process them. if(PeekMessage( &msg, 0, 0, 0, PM_REMOVE )) { TranslateMessage( &msg ); DispatchMessage( &msg ); } // Otherwise, do animation/game stuff. else { mTimer.tick(); if( !mAppPaused ) updateScene(mTimer.getDeltaTime()); else Sleep(50); drawScene(); } } return (int)msg.wParam; } void D3DApp::initApp() { initMainWindow(); initDirect3D(); D3DX10_FONT_DESC fontDesc; fontDesc.Height = 24; fontDesc.Width = 0; fontDesc.Weight = 0; fontDesc.MipLevels = 1; fontDesc.Italic = false; fontDesc.CharSet = DEFAULT_CHARSET; fontDesc.OutputPrecision = OUT_DEFAULT_PRECIS; fontDesc.Quality = DEFAULT_QUALITY; fontDesc.PitchAndFamily = DEFAULT_PITCH | FF_DONTCARE; wcscpy(fontDesc.FaceName, L"Times New Roman"); D3DX10CreateFontIndirect(md3dDevice, &fontDesc, &mFont); } void D3DApp::onResize() { // Release the old views, as they hold references to the buffers we // will be destroying. Also release the old depth/stencil buffer. ReleaseCOM(mRenderTargetView); ReleaseCOM(mDepthStencilView); ReleaseCOM(mDepthStencilBuffer); // Resize the swap chain and recreate the render target view. HR(mSwapChain->ResizeBuffers(1, mClientWidth, mClientHeight, DXGI_FORMAT_R8G8B8A8_UNORM, 0)); ID3D10Texture2D* backBuffer; HR(mSwapChain->GetBuffer(0, __uuidof(ID3D10Texture2D), reinterpret_cast<void**>(&backBuffer))); HR(md3dDevice->CreateRenderTargetView(backBuffer, 0, &mRenderTargetView)); ReleaseCOM(backBuffer); // Create the depth/stencil buffer and view. D3D10_TEXTURE2D_DESC depthStencilDesc; depthStencilDesc.Width = mClientWidth; depthStencilDesc.Height = mClientHeight; depthStencilDesc.MipLevels = 1; depthStencilDesc.ArraySize = 1; depthStencilDesc.Format = DXGI_FORMAT_D24_UNORM_S8_UINT; depthStencilDesc.SampleDesc.Count = 1; // multisampling must match depthStencilDesc.SampleDesc.Quality = 0; // swap chain values. depthStencilDesc.Usage = D3D10_USAGE_DEFAULT; depthStencilDesc.BindFlags = D3D10_BIND_DEPTH_STENCIL; depthStencilDesc.CPUAccessFlags = 0; depthStencilDesc.MiscFlags = 0; HR(md3dDevice->CreateTexture2D(&depthStencilDesc, 0, &mDepthStencilBuffer)); HR(md3dDevice->CreateDepthStencilView(mDepthStencilBuffer, 0, &mDepthStencilView)); // Bind the render target view and depth/stencil view to the pipeline. md3dDevice->OMSetRenderTargets(1, &mRenderTargetView, mDepthStencilView); // Set the viewport transform. D3D10_VIEWPORT vp; vp.TopLeftX = 0; vp.TopLeftY = 0; vp.Width = mClientWidth; vp.Height = mClientHeight; vp.MinDepth = 0.0f; vp.MaxDepth = 1.0f; md3dDevice->RSSetViewports(1, &vp); } void D3DApp::updateScene(float dt) { // Code computes the average frames per second, and also the // average time it takes to render one frame. static int frameCnt = 0; static float t_base = 0.0f; frameCnt++; // Compute averages over one second period. if( (mTimer.getGameTime() - t_base) >= 1.0f ) { float fps = (float)frameCnt; // fps = frameCnt / 1 float mspf = 1000.0f / fps; std::wostringstream outs; outs.precision(6); outs << L"FPS: " << fps << L"\n" << "Milliseconds: Per Frame: " << mspf; mFrameStats = outs.str(); // Reset for next average. frameCnt = 0; t_base += 1.0f; } } void D3DApp::drawScene() { md3dDevice->ClearRenderTargetView(mRenderTargetView, mClearColor); md3dDevice->ClearDepthStencilView(mDepthStencilView, D3D10_CLEAR_DEPTH|D3D10_CLEAR_STENCIL, 1.0f, 0); } LRESULT D3DApp::msgProc(UINT msg, WPARAM wParam, LPARAM lParam) { switch( msg ) { // WM_ACTIVATE is sent when the window is activated or deactivated. // We pause the game when the window is deactivated and unpause it // when it becomes active. case WM_ACTIVATE: if( LOWORD(wParam) == WA_INACTIVE ) { mAppPaused = true; mTimer.stop(); } else { mAppPaused = false; mTimer.start(); } return 0; // WM_SIZE is sent when the user resizes the window. case WM_SIZE: // Save the new client area dimensions. mClientWidth = LOWORD(lParam); mClientHeight = HIWORD(lParam); if( md3dDevice ) { if( wParam == SIZE_MINIMIZED ) { mAppPaused = true; mMinimized = true; mMaximized = false; } else if( wParam == SIZE_MAXIMIZED ) { mAppPaused = false; mMinimized = false; mMaximized = true; onResize(); } else if( wParam == SIZE_RESTORED ) { // Restoring from minimized state? if( mMinimized ) { mAppPaused = false; mMinimized = false; onResize(); } // Restoring from maximized state? else if( mMaximized ) { mAppPaused = false; mMaximized = false; onResize(); } else if( mResizing ) { // If user is dragging the resize bars, we do not resize // the buffers here because as the user continuously // drags the resize bars, a stream of WM_SIZE messages are // sent to the window, and it would be pointless (and slow) // to resize for each WM_SIZE message received from dragging // the resize bars. So instead, we reset after the user is // done resizing the window and releases the resize bars, which // sends a WM_EXITSIZEMOVE message. } else // API call such as SetWindowPos or mSwapChain->SetFullscreenState. { onResize(); } } } return 0; // WM_EXITSIZEMOVE is sent when the user grabs the resize bars. case WM_ENTERSIZEMOVE: mAppPaused = true; mResizing = true; mTimer.stop(); return 0; // WM_EXITSIZEMOVE is sent when the user releases the resize bars. // Here we reset everything based on the new window dimensions. case WM_EXITSIZEMOVE: mAppPaused = false; mResizing = false; mTimer.start(); onResize(); return 0; // WM_DESTROY is sent when the window is being destroyed. case WM_DESTROY: PostQuitMessage(0); return 0; // The WM_MENUCHAR message is sent when a menu is active and the user presses // a key that does not correspond to any mnemonic or accelerator key. case WM_MENUCHAR: // Don't beep when we alt-enter. return MAKELRESULT(0, MNC_CLOSE); // Catch this message so to prevent the window from becoming too small. case WM_GETMINMAXINFO: ((MINMAXINFO*)lParam)->ptMinTrackSize.x = 200; ((MINMAXINFO*)lParam)->ptMinTrackSize.y = 200; return 0; } return DefWindowProc(mhMainWnd, msg, wParam, lParam); } void D3DApp::initMainWindow() { WNDCLASS wc; wc.style = CS_HREDRAW | CS_VREDRAW; wc.lpfnWndProc = MainWndProc; wc.cbClsExtra = 0; wc.cbWndExtra = 0; wc.hInstance = mhAppInst; wc.hIcon = LoadIcon(0, IDI_APPLICATION); wc.hCursor = LoadCursor(0, IDC_ARROW); wc.hbrBackground = (HBRUSH)GetStockObject(NULL_BRUSH); wc.lpszMenuName = 0; wc.lpszClassName = L"D3DWndClassName"; if( !RegisterClass(&wc) ) { MessageBox(0, L"RegisterClass FAILED", 0, 0); PostQuitMessage(0); } // Compute window rectangle dimensions based on requested client area dimensions. RECT R = { 0, 0, mClientWidth, mClientHeight }; AdjustWindowRect(&R, WS_OVERLAPPEDWINDOW, false); int width = R.right - R.left; int height = R.bottom - R.top; mhMainWnd = CreateWindow(L"D3DWndClassName", mMainWndCaption.c_str(), WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, width, height, 0, 0, mhAppInst, this); if( !mhMainWnd ) { MessageBox(0, L"CreateWindow FAILED", 0, 0); PostQuitMessage(0); } ShowWindow(mhMainWnd, SW_SHOW); UpdateWindow(mhMainWnd); } void D3DApp::initDirect3D() { // Fill out a DXGI_SWAP_CHAIN_DESC to describe our swap chain. DXGI_SWAP_CHAIN_DESC sd; sd.BufferDesc.Width = mClientWidth; sd.BufferDesc.Height = mClientHeight; sd.BufferDesc.RefreshRate.Numerator = 60; sd.BufferDesc.RefreshRate.Denominator = 1; sd.BufferDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; sd.BufferDesc.ScanlineOrdering = DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED; sd.BufferDesc.Scaling = DXGI_MODE_SCALING_UNSPECIFIED; // No multisampling. sd.SampleDesc.Count = 1; sd.SampleDesc.Quality = 0; sd.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; sd.BufferCount = 1; sd.OutputWindow = mhMainWnd; sd.Windowed = true; sd.SwapEffect = DXGI_SWAP_EFFECT_DISCARD; sd.Flags = 0; // Create the device. UINT createDeviceFlags = 0; #if defined(DEBUG) || defined(_DEBUG) createDeviceFlags |= D3D10_CREATE_DEVICE_DEBUG; #endif HR( D3D10CreateDeviceAndSwapChain( 0, //default adapter md3dDriverType, 0, // no software device createDeviceFlags, D3D10_SDK_VERSION, &sd, &mSwapChain, &md3dDevice) ); // The remaining steps that need to be carried out for d3d creation // also need to be executed every time the window is resized. So // just call the onResize method here to avoid code duplication. onResize(); }

Developer IT