Search Results

Search found 897 results on 36 pages for 'lego 69'.

Page 29/36 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• How to mount a blu-ray drive?

  - by Stephan Schielke

  Maybe it is for the best to close this question. This has nothing to do with a bluray drive in general anymore. Probably a hardware defect. I will try to test it with a windows system and different cables again... Thx so far. I have a bluray/dvd/cdrom drive with SATA. Ubuntu wont find it under /dev/sd wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg2' rwrw-- : 'HL-DT-ST' 'BDDVDRW CH08LS10' ------------------------------------------------------------------------- cdrecord -scanbus scsibus2: 2,0,0 200) 'HL-DT-ST' 'BDDVDRW CH08LS10' '2.00' Removable CD-ROM fdisk dont even lists it. Ubuntu only automounts blank DVDs, but neither CDROM nor Blurays. I also changed the sata slot, sata cable and the power cable. The drive works with a windows system. This happens when I try to mount: sudo mount -t auto /dev/scd0 /media/bluray mount: you must specify the filesystem type I tried all filesystems there are. I also installed makemkv. It finds the drive but not the disc. Here is my /dev ls -al /dev total 12 drwxr-xr-x 17 root root 4420 2011-11-25 19:36 . drwxr-xr-x 28 root root 4096 2011-11-25 07:12 .. crw------- 1 root root 10, 235 2011-11-25 19:28 autofs -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab.old drwxr-xr-x 2 root root 700 2011-11-25 19:27 block drwxr-xr-x 2 root root 100 2011-11-25 19:27 bsg crw------- 1 root root 10, 234 2011-11-25 19:28 btrfs-control drwxr-xr-x 3 root root 60 2011-11-25 19:27 bus drwxr-xr-x 2 root root 3820 2011-11-25 19:28 char crw------- 1 root root 5, 1 2011-11-25 19:28 console lrwxrwxrwx 1 root root 11 2011-11-25 19:28 core -> /proc/kcore drwxr-xr-x 2 root root 60 2011-11-25 19:28 cpu crw------- 1 root root 10, 60 2011-11-25 19:28 cpu_dma_latency drwxr-xr-x 7 root root 140 2011-11-25 19:27 disk crw------- 1 root root 10, 61 2011-11-25 19:28 ecryptfs crw-rw---- 1 root video 29, 0 2011-11-25 19:28 fb0 lrwxrwxrwx 1 root root 13 2011-11-25 19:28 fd -> /proc/self/fd crw-rw-rw- 1 root root 1, 7 2011-11-25 19:28 full crw-rw-rw- 1 root fuse 10, 229 2011-11-25 19:28 fuse crw------- 1 root root 251, 0 2011-11-25 19:28 hidraw0 crw------- 1 root root 251, 1 2011-11-25 19:28 hidraw1 crw------- 1 root root 10, 228 2011-11-25 19:28 hpet lrwxrwxrwx 1 root root 14 2011-11-25 19:27 .initramfs -> /run/initramfs drwxr-xr-x 4 root root 220 2011-11-25 19:28 input crw------- 1 root root 1, 11 2011-11-25 19:28 kmsg srw-rw-rw- 1 root root 0 2011-11-25 19:28 log brw-rw---- 1 root disk 7, 0 2011-11-25 19:28 loop0 brw-rw---- 1 root disk 7, 1 2011-11-25 19:28 loop1 brw-rw---- 1 root disk 7, 2 2011-11-25 19:28 loop2 brw-rw---- 1 root disk 7, 3 2011-11-25 19:28 loop3 brw-rw---- 1 root disk 7, 4 2011-11-25 19:28 loop4 brw-rw---- 1 root disk 7, 5 2011-11-25 19:28 loop5 brw-rw---- 1 root disk 7, 6 2011-11-25 19:28 loop6 brw-rw---- 1 root disk 7, 7 2011-11-25 19:28 loop7 drwxr-xr-x 2 root root 60 2011-11-25 19:27 mapper crw------- 1 root root 10, 227 2011-11-25 19:28 mcelog crw-r----- 1 root kmem 1, 1 2011-11-25 19:28 mem drwxr-xr-x 2 root root 60 2011-11-25 19:27 net crw------- 1 root root 10, 59 2011-11-25 19:28 network_latency crw------- 1 root root 10, 58 2011-11-25 19:28 network_throughput crw-rw-rw- 1 root root 1, 3 2011-11-25 19:28 null crw-rw-rw- 1 root root 195, 0 2011-11-25 19:28 nvidia0 crw-rw-rw- 1 root root 195, 255 2011-11-25 19:28 nvidiactl crw------- 1 root root 1, 12 2011-11-25 19:28 oldmem crw-r----- 1 root kmem 1, 4 2011-11-25 19:28 port crw------- 1 root root 108, 0 2011-11-25 19:28 ppp crw------- 1 root root 10, 1 2011-11-25 19:28 psaux crw-rw-rw- 1 root tty 5, 2 2011-11-25 20:00 ptmx drwxr-xr-x 2 root root 0 2011-11-25 19:27 pts brw-rw---- 1 root disk 1, 0 2011-11-25 19:28 ram0 brw-rw---- 1 root disk 1, 1 2011-11-25 19:28 ram1 brw-rw---- 1 root disk 1, 10 2011-11-25 19:28 ram10 brw-rw---- 1 root disk 1, 11 2011-11-25 19:28 ram11 brw-rw---- 1 root disk 1, 12 2011-11-25 19:28 ram12 brw-rw---- 1 root disk 1, 13 2011-11-25 19:28 ram13 brw-rw---- 1 root disk 1, 14 2011-11-25 19:28 ram14 brw-rw---- 1 root disk 1, 15 2011-11-25 19:28 ram15 brw-rw---- 1 root disk 1, 2 2011-11-25 19:28 ram2 brw-rw---- 1 root disk 1, 3 2011-11-25 19:28 ram3 brw-rw---- 1 root disk 1, 4 2011-11-25 19:28 ram4 brw-rw---- 1 root disk 1, 5 2011-11-25 19:28 ram5 brw-rw---- 1 root disk 1, 6 2011-11-25 19:28 ram6 brw-rw---- 1 root disk 1, 7 2011-11-25 19:28 ram7 brw-rw---- 1 root disk 1, 8 2011-11-25 19:28 ram8 brw-rw---- 1 root disk 1, 9 2011-11-25 19:28 ram9 crw-rw-rw- 1 root root 1, 8 2011-11-25 19:28 random crw-rw-r--+ 1 root root 10, 62 2011-11-25 19:28 rfkill lrwxrwxrwx 1 root root 4 2011-11-25 19:28 rtc -> rtc0 crw------- 1 root root 254, 0 2011-11-25 19:28 rtc0 lrwxrwxrwx 1 root root 3 2011-11-25 19:38 scd0 -> sr0 brw-rw---- 1 root disk 8, 0 2011-11-25 19:28 sda brw-rw---- 1 root disk 8, 1 2011-11-25 19:28 sda1 brw-rw---- 1 root disk 8, 2 2011-11-25 19:28 sda2 brw-rw---- 1 root disk 8, 3 2011-11-25 19:28 sda3 brw-rw---- 1 root disk 8, 5 2011-11-25 19:28 sda5 brw-rw---- 1 root disk 8, 6 2011-11-25 19:28 sda6 brw-rw---- 1 root disk 8, 16 2011-11-25 19:28 sdb brw-rw---- 1 root disk 8, 17 2011-11-25 19:28 sdb1 crw-rw---- 1 root disk 21, 0 2011-11-25 19:28 sg0 crw-rw---- 1 root disk 21, 1 2011-11-25 19:28 sg1 crw-rw----+ 1 root cdrom 21, 2 2011-11-25 19:28 sg2 lrwxrwxrwx 1 root root 8 2011-11-25 19:28 shm -> /run/shm crw------- 1 root root 10, 231 2011-11-25 19:28 snapshot drwxr-xr-x 4 root root 280 2011-11-25 19:28 snd brw-rw----+ 1 root cdrom 11, 0 2011-11-25 19:38 sr0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdout -> /proc/self/fd/1 crw-rw-rw- 1 root tty 5, 0 2011-11-25 19:35 tty crw--w---- 1 root tty 4, 0 2011-11-25 19:28 tty0 crw------- 1 root root 4, 1 2011-11-25 19:28 tty1 crw--w---- 1 root tty 4, 10 2011-11-25 19:28 tty10 crw--w---- 1 root tty 4, 11 2011-11-25 19:28 tty11 crw--w---- 1 root tty 4, 12 2011-11-25 19:28 tty12 crw--w---- 1 root tty 4, 13 2011-11-25 19:28 tty13 crw--w---- 1 root tty 4, 14 2011-11-25 19:28 tty14 crw--w---- 1 root tty 4, 15 2011-11-25 19:28 tty15 crw--w---- 1 root tty 4, 16 2011-11-25 19:28 tty16 crw--w---- 1 root tty 4, 17 2011-11-25 19:28 tty17 crw--w---- 1 root tty 4, 18 2011-11-25 19:28 tty18 crw--w---- 1 root tty 4, 19 2011-11-25 19:28 tty19 crw------- 1 root root 4, 2 2011-11-25 19:28 tty2 crw--w---- 1 root tty 4, 20 2011-11-25 19:28 tty20 crw--w---- 1 root tty 4, 21 2011-11-25 19:28 tty21 crw--w---- 1 root tty 4, 22 2011-11-25 19:28 tty22 crw--w---- 1 root tty 4, 23 2011-11-25 19:28 tty23 crw--w---- 1 root tty 4, 24 2011-11-25 19:28 tty24 crw--w---- 1 root tty 4, 25 2011-11-25 19:28 tty25 crw--w---- 1 root tty 4, 26 2011-11-25 19:28 tty26 crw--w---- 1 root tty 4, 27 2011-11-25 19:28 tty27 crw--w---- 1 root tty 4, 28 2011-11-25 19:28 tty28 crw--w---- 1 root tty 4, 29 2011-11-25 19:28 tty29 crw------- 1 root root 4, 3 2011-11-25 19:28 tty3 crw--w---- 1 root tty 4, 30 2011-11-25 19:28 tty30 crw--w---- 1 root tty 4, 31 2011-11-25 19:28 tty31 crw--w---- 1 root tty 4, 32 2011-11-25 19:28 tty32 crw--w---- 1 root tty 4, 33 2011-11-25 19:28 tty33 crw--w---- 1 root tty 4, 34 2011-11-25 19:28 tty34 crw--w---- 1 root tty 4, 35 2011-11-25 19:28 tty35 crw--w---- 1 root tty 4, 36 2011-11-25 19:28 tty36 crw--w---- 1 root tty 4, 37 2011-11-25 19:28 tty37 crw--w---- 1 root tty 4, 38 2011-11-25 19:28 tty38 crw--w---- 1 root tty 4, 39 2011-11-25 19:28 tty39 crw------- 1 root root 4, 4 2011-11-25 19:28 tty4 crw--w---- 1 root tty 4, 40 2011-11-25 19:28 tty40 crw--w---- 1 root tty 4, 41 2011-11-25 19:28 tty41 crw--w---- 1 root tty 4, 42 2011-11-25 19:28 tty42 crw--w---- 1 root tty 4, 43 2011-11-25 19:28 tty43 crw--w---- 1 root tty 4, 44 2011-11-25 19:28 tty44 crw--w---- 1 root tty 4, 45 2011-11-25 19:28 tty45 crw--w---- 1 root tty 4, 46 2011-11-25 19:28 tty46 crw--w---- 1 root tty 4, 47 2011-11-25 19:28 tty47 crw--w---- 1 root tty 4, 48 2011-11-25 19:28 tty48 crw--w---- 1 root tty 4, 49 2011-11-25 19:28 tty49 crw------- 1 root root 4, 5 2011-11-25 19:28 tty5 crw--w---- 1 root tty 4, 50 2011-11-25 19:28 tty50 crw--w---- 1 root tty 4, 51 2011-11-25 19:28 tty51 crw--w---- 1 root tty 4, 52 2011-11-25 19:28 tty52 crw--w---- 1 root tty 4, 53 2011-11-25 19:28 tty53 crw--w---- 1 root tty 4, 54 2011-11-25 19:28 tty54 crw--w---- 1 root tty 4, 55 2011-11-25 19:28 tty55 crw--w---- 1 root tty 4, 56 2011-11-25 19:28 tty56 crw--w---- 1 root tty 4, 57 2011-11-25 19:28 tty57 crw--w---- 1 root tty 4, 58 2011-11-25 19:28 tty58 crw--w---- 1 root tty 4, 59 2011-11-25 19:28 tty59 crw------- 1 root root 4, 6 2011-11-25 19:28 tty6 crw--w---- 1 root tty 4, 60 2011-11-25 19:28 tty60 crw--w---- 1 root tty 4, 61 2011-11-25 19:28 tty61 crw--w---- 1 root tty 4, 62 2011-11-25 19:28 tty62 crw--w---- 1 root tty 4, 63 2011-11-25 19:28 tty63 crw--w---- 1 root tty 4, 7 2011-11-25 19:28 tty7 crw--w---- 1 root tty 4, 8 2011-11-25 19:28 tty8 crw--w---- 1 root tty 4, 9 2011-11-25 19:28 tty9 crw------- 1 root root 5, 3 2011-11-25 19:28 ttyprintk crw-rw---- 1 root dialout 4, 64 2011-11-25 19:28 ttyS0 crw-rw---- 1 root dialout 4, 65 2011-11-25 19:28 ttyS1 crw-rw---- 1 root dialout 4, 74 2011-11-25 19:28 ttyS10 crw-rw---- 1 root dialout 4, 75 2011-11-25 19:28 ttyS11 crw-rw---- 1 root dialout 4, 76 2011-11-25 19:28 ttyS12 crw-rw---- 1 root dialout 4, 77 2011-11-25 19:28 ttyS13 crw-rw---- 1 root dialout 4, 78 2011-11-25 19:28 ttyS14 crw-rw---- 1 root dialout 4, 79 2011-11-25 19:28 ttyS15 crw-rw---- 1 root dialout 4, 80 2011-11-25 19:28 ttyS16 crw-rw---- 1 root dialout 4, 81 2011-11-25 19:28 ttyS17 crw-rw---- 1 root dialout 4, 82 2011-11-25 19:28 ttyS18 crw-rw---- 1 root dialout 4, 83 2011-11-25 19:28 ttyS19 crw-rw---- 1 root dialout 4, 66 2011-11-25 19:28 ttyS2 crw-rw---- 1 root dialout 4, 84 2011-11-25 19:28 ttyS20 crw-rw---- 1 root dialout 4, 85 2011-11-25 19:28 ttyS21 crw-rw---- 1 root dialout 4, 86 2011-11-25 19:28 ttyS22 crw-rw---- 1 root dialout 4, 87 2011-11-25 19:28 ttyS23 crw-rw---- 1 root dialout 4, 88 2011-11-25 19:28 ttyS24 crw-rw---- 1 root dialout 4, 89 2011-11-25 19:28 ttyS25 crw-rw---- 1 root dialout 4, 90 2011-11-25 19:28 ttyS26 crw-rw---- 1 root dialout 4, 91 2011-11-25 19:28 ttyS27 crw-rw---- 1 root dialout 4, 92 2011-11-25 19:28 ttyS28 crw-rw---- 1 root dialout 4, 93 2011-11-25 19:28 ttyS29 crw-rw---- 1 root dialout 4, 67 2011-11-25 19:28 ttyS3 crw-rw---- 1 root dialout 4, 94 2011-11-25 19:28 ttyS30 crw-rw---- 1 root dialout 4, 95 2011-11-25 19:28 ttyS31 crw-rw---- 1 root dialout 4, 68 2011-11-25 19:28 ttyS4 crw-rw---- 1 root dialout 4, 69 2011-11-25 19:28 ttyS5 crw-rw---- 1 root dialout 4, 70 2011-11-25 19:28 ttyS6 crw-rw---- 1 root dialout 4, 71 2011-11-25 19:28 ttyS7 crw-rw---- 1 root dialout 4, 72 2011-11-25 19:28 ttyS8 crw-rw---- 1 root dialout 4, 73 2011-11-25 19:28 ttyS9 d rwxr-xr-x 3 root root 60 2011-11-25 19:28 .udev crw-r----- 1 root root 10, 223 2011-11-25 19:28 uinput crw-rw-rw- 1 root root 1, 9 2011-11-25 19:28 urandom drwxr-xr-x 2 root root 60 2011-11-25 19:27 usb crw------- 1 root root 252, 0 2011-11-25 19:28 usbmon0 crw------- 1 root root 252, 1 2011-11-25 19:28 usbmon1 crw------- 1 root root 252, 2 2011-11-25 19:28 usbmon2 crw------- 1 root root 252, 3 2011-11-25 19:28 usbmon3 crw------- 1 root root 252, 4 2011-11-25 19:28 usbmon4 crw------- 1 root root 252, 5 2011-11-25 19:28 usbmon5 crw------- 1 root root 252, 6 2011-11-25 19:28 usbmon6 crw------- 1 root root 252, 7 2011-11-25 19:28 usbmon7 crw------- 1 root root 252, 8 2011-11-25 19:28 usbmon8 drwxr-xr-x 4 root root 80 2011-11-25 19:28 v4l crw------- 1 root root 10, 57 2011-11-25 19:28 vboxdrv crw------- 1 root root 10, 56 2011-11-25 19:28 vboxnetctl drwxr-x--- 4 root vboxusers 80 2011-11-25 19:28 vboxusb crw-rw---- 1 root tty 7, 0 2011-11-25 19:28 vcs crw-rw---- 1 root tty 7, 1 2011-11-25 19:28 vcs1 crw-rw---- 1 root tty 7, 2 2011-11-25 19:28 vcs2 crw-rw---- 1 root tty 7, 3 2011-11-25 19:28 vcs3 crw-rw---- 1 root tty 7, 4 2011-11-25 19:28 vcs4 crw-rw---- 1 root tty 7, 5 2011-11-25 19:28 vcs5 crw-rw---- 1 root tty 7, 6 2011-11-25 19:28 vcs6 crw-rw---- 1 root tty 7, 128 2011-11-25 19:28 vcsa crw-rw---- 1 root tty 7, 129 2011-11-25 19:28 vcsa1 crw-rw---- 1 root tty 7, 130 2011-11-25 19:28 vcsa2 crw-rw---- 1 root tty 7, 131 2011-11-25 19:28 vcsa3 crw-rw---- 1 root tty 7, 132 2011-11-25 19:28 vcsa4 crw-rw---- 1 root tty 7, 133 2011-11-25 19:28 vcsa5 crw-rw---- 1 root tty 7, 134 2011-11-25 19:28 vcsa6 crw------- 1 root root 10, 63 2011-11-25 19:28 vga_arbiter crw-rw----+ 1 root video 81, 0 2011-11-25 19:28 video0 crw-rw-rw- 1 root root 1, 5 2011-11-25 19:28 zero sg_scan -i gives me: sudo sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST31000524NS SN12 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi0 channel=0 id=1 lun=0 [em] ATA WDC WD15EADS-00S 01.0 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi2 channel=0 id=0 lun=0 [em] HL-DT-ST BDDVDRW CH08LS10 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5] sg_map gives me: /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 /dev/scd0 lsscsi -l gives me: [0:0:0:0] disk ATA ST31000524NS SN12 /dev/sda state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [0:0:1:0] disk ATA WDC WD15EADS-00S 01.0 /dev/sdb state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [2:0:0:0] cd/dvd HL-DT-ST BDDVDRW CH08LS10 2.00 /dev/sr0 state=running queue_depth=1 scsi_level=6 type=5 device_blocked=0 timeout=30 my udf mod is: filename: /lib/modules/3.0.0-14-generic/kernel/fs/udf/udf.ko license: GPL description: Universal Disk Format Filesystem author: Ben Fennema srcversion: 6ABDE012374D96B9685B8E5 depends: crc-itu-t vermagic: 3.0.0-14-generic SMP mod_unload modversions Do I need special drivers or mods enabled? Do I need to change some BIOS settings? edit: Somehow I am now able to fire the mount command without any filesystem errors, but now I get: mount: no medium found on /dev/sr0

  Read the article

• Manage Your Twitter Account from the Sidebar in Firefox

  - by Asian Angel

  Are you a Twitter addict and need an easy way to manage your account in Firefox? Now you can access Twitter in your Sidebar or as a separate window with the TwitKit+ extension for Firefox. Accessing TwitKit+ There are three ways that you can access TwitKit+ after installing the extension. The first is by adding the “Toolbar Button” to your browser’s UI. The second and third methods are through the “View & Tools Menus”.   TwitKit+ in Action When you open TwitKit+ for the first time you will see Twitter’s “Public Tweet Stream”. To get started login into your account. Note: If you do not care for the “brown theme” you can select a different one in “Preferences”. Here is a closer look at the top area and the commands available. Notice the “blue arrow symbol” in the upper left corner…very useful if you want to separate TwitKit+ from your main browser window for a bit. Secure Mode, Undock, Preferences, Login/Logout Google Search, Twitter Search, Copy Selection To Status Box, Shorten Selected URL Public, User, Friends, Followers, @ Messages, Direct Messages, Profile Note: To use Google or Twitter search enter your term in the “Status Area” and click on the appropriate service icon. Here is the regular timeline for our account…the “clickable tab buttons” make everything easy to view and work with. You can perform actions such as replying, retweeting, marking as a favorite, etc. using the set of “management buttons” at the bottom of each tweet. To add a new tweet to your timeline enter your text and press “Enter”. A look at the “Following List” for our account. Having a more defined and separate “view categories” set makes this better than directly accessing the Twitter website. Preferences The preferences can be quickly sorted out…choose how often the timeline is updated, name display, favorite URL shortening service, theme, and font size. Note: The default connection setting is for “Secure Access”. Conclusion TwitKit+ makes a nice addition to Firefox for anyone who loves keeping up with Twitter throughout the day. There when you want it and out of your way the rest of the time. Links Download the TwitKit+ extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Move Add-on Management to the Sidebar in FirefoxPreview and Manage Multiple Tabs in Firefox with Tab SidebarDisable Windows Sidebar in VistaQuick Tip: Use Google Talk Sidebar in FirefoxRun Windows Sidebar Gadgets Without the Sidebar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Manage Your Twitter Account from the Sidebar in Firefox

  - by Asian Angel

  Are you a Twitter addict and need an easy way to manage your account in Firefox? Now you can access Twitter in your Sidebar or as a separate window with the TwitKit+ extension for Firefox. Accessing TwitKit+ There are three ways that you can access TwitKit+ after installing the extension. The first is by adding the “Toolbar Button” to your browser’s UI. The second and third methods are through the “View & Tools Menus”.   TwitKit+ in Action When you open TwitKit+ for the first time you will see Twitter’s “Public Tweet Stream”. To get started login into your account. Note: If you do not care for the “brown theme” you can select a different one in “Preferences”. Here is a closer look at the top area and the commands available. Notice the “blue arrow symbol” in the upper left corner…very useful if you want to separate TwitKit+ from your main browser window for a bit. Secure Mode, Undock, Preferences, Login/Logout Google Search, Twitter Search, Copy Selection To Status Box, Shorten Selected URL Public, User, Friends, Followers, @ Messages, Direct Messages, Profile Note: To use Google or Twitter search enter your term in the “Status Area” and click on the appropriate service icon. Here is the regular timeline for our account…the “clickable tab buttons” make everything easy to view and work with. You can perform actions such as replying, retweeting, marking as a favorite, etc. using the set of “management buttons” at the bottom of each tweet. To add a new tweet to your timeline enter your text and press “Enter”. A look at the “Following List” for our account. Having a more defined and separate “view categories” set makes this better than directly accessing the Twitter website. Preferences The preferences can be quickly sorted out…choose how often the timeline is updated, name display, favorite URL shortening service, theme, and font size. Note: The default connection setting is for “Secure Access”. Conclusion TwitKit+ makes a nice addition to Firefox for anyone who loves keeping up with Twitter throughout the day. There when you want it and out of your way the rest of the time. Links Download the TwitKit+ extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Move Add-on Management to the Sidebar in FirefoxPreview and Manage Multiple Tabs in Firefox with Tab SidebarDisable Windows Sidebar in VistaQuick Tip: Use Google Talk Sidebar in FirefoxRun Windows Sidebar Gadgets Without the Sidebar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Unity – Part 5: Injecting Values

  - by Ricardo Peres

  Introduction This is the fifth post on Unity. You can find the introductory post here, the second post, on dependency injection here, a third one on Aspect Oriented Programming (AOP) here and the latest so far, on writing custom extensions, here. This time we will talk about injecting simple values. An Inversion of Control (IoC) / Dependency Injector (DI) container like Unity can be used for things other than injecting complex class dependencies. It can also be used for setting property values or method/constructor parameters whenever a class is built. The main difference is that these values do not have a lifetime manager associated with them and do not come from the regular IoC registration store. Unlike, for instance, MEF, Unity won’t let you register as a dependency a string or an integer, so you have to take a different approach, which I will describe in this post. Scenario Let’s imagine we have a base interface that describes a logger – the same as in previous examples: 1: public interface ILogger 2: { 3: void Log(String message); 4: } And a concrete implementation that writes to a file: 1: public class FileLogger : ILogger 2: { 3: public String Filename 4: { 5: get; 6: set; 7: } 8:  9: #region ILogger Members 10:  11: public void Log(String message) 12: { 13: using (Stream file = File.OpenWrite(this.Filename)) 14: { 15: Byte[] data = Encoding.Default.GetBytes(message); 16: 17: file.Write(data, 0, data.Length); 18: } 19: } 20:  21: #endregion 22: } And let’s say we want the Filename property to come from the application settings (appSettings) section on the Web/App.config file. As usual with Unity, there is an extensibility point that allows us to automatically do this, both with code configuration or statically on the configuration file. Extending Injection We start by implementing a class that will retrieve a value from the appSettings by inheriting from ValueElement: 1: sealed class AppSettingsParameterValueElement : ValueElement, IDependencyResolverPolicy 2: { 3: #region Private methods 4: private Object CreateInstance(Type parameterType) 5: { 6: Object configurationValue = ConfigurationManager.AppSettings[this.AppSettingsKey]; 7:  8: if (parameterType != typeof(String)) 9: { 10: TypeConverter typeConverter = this.GetTypeConverter(parameterType); 11:  12: configurationValue = typeConverter.ConvertFromInvariantString(configurationValue as String); 13: } 14:  15: return (configurationValue); 16: } 17: #endregion 18:  19: #region Private methods 20: private TypeConverter GetTypeConverter(Type parameterType) 21: { 22: if (String.IsNullOrEmpty(this.TypeConverterTypeName) == false) 23: { 24: return (Activator.CreateInstance(TypeResolver.ResolveType(this.TypeConverterTypeName)) as TypeConverter); 25: } 26: else 27: { 28: return (TypeDescriptor.GetConverter(parameterType)); 29: } 30: } 31: #endregion 32:  33: #region Public override methods 34: public override InjectionParameterValue GetInjectionParameterValue(IUnityContainer container, Type parameterType) 35: { 36: Object value = this.CreateInstance(parameterType); 37: return (new InjectionParameter(parameterType, value)); 38: } 39: #endregion 40:  41: #region IDependencyResolverPolicy Members 42:  43: public Object Resolve(IBuilderContext context) 44: { 45: Type parameterType = null; 46:  47: if (context.CurrentOperation is ResolvingPropertyValueOperation) 48: { 49: ResolvingPropertyValueOperation op = (context.CurrentOperation as ResolvingPropertyValueOperation); 50: PropertyInfo prop = op.TypeBeingConstructed.GetProperty(op.PropertyName); 51: parameterType = prop.PropertyType; 52: } 53: else if (context.CurrentOperation is ConstructorArgumentResolveOperation) 54: { 55: ConstructorArgumentResolveOperation op = (context.CurrentOperation as ConstructorArgumentResolveOperation); 56: String args = op.ConstructorSignature.Split('(')[1].Split(')')[0]; 57: Type[] types = args.Split(',').Select(a => Type.GetType(a.Split(' ')[0])).ToArray(); 58: ConstructorInfo ctor = op.TypeBeingConstructed.GetConstructor(types); 59: parameterType = ctor.GetParameters().Where(p => p.Name == op.ParameterName).Single().ParameterType; 60: } 61: else if (context.CurrentOperation is MethodArgumentResolveOperation) 62: { 63: MethodArgumentResolveOperation op = (context.CurrentOperation as MethodArgumentResolveOperation); 64: String methodName = op.MethodSignature.Split('(')[0].Split(' ')[1]; 65: String args = op.MethodSignature.Split('(')[1].Split(')')[0]; 66: Type[] types = args.Split(',').Select(a => Type.GetType(a.Split(' ')[0])).ToArray(); 67: MethodInfo method = op.TypeBeingConstructed.GetMethod(methodName, types); 68: parameterType = method.GetParameters().Where(p => p.Name == op.ParameterName).Single().ParameterType; 69: } 70:  71: return (this.CreateInstance(parameterType)); 72: } 73:  74: #endregion 75:  76: #region Public properties 77: [ConfigurationProperty("appSettingsKey", IsRequired = true)] 78: public String AppSettingsKey 79: { 80: get 81: { 82: return ((String)base["appSettingsKey"]); 83: } 84:  85: set 86: { 87: base["appSettingsKey"] = value; 88: } 89: } 90: #endregion 91: } As you can see from the implementation of the IDependencyResolverPolicy.Resolve method, this will work in three different scenarios: When it is applied to a property; When it is applied to a constructor parameter; When it is applied to an initialization method. The implementation will even try to convert the value to its declared destination, for example, if the destination property is an Int32, it will try to convert the appSettings stored string to an Int32. Injection By Configuration If we want to configure injection by configuration, we need to implement a custom section extension by inheriting from SectionExtension, and registering our custom element with the name “appSettings”: 1: sealed class AppSettingsParameterInjectionElementExtension : SectionExtension 2: { 3: public override void AddExtensions(SectionExtensionContext context) 4: { 5: context.AddElement<AppSettingsParameterValueElement>("appSettings"); 6: } 7: } And on the configuration file, for setting a property, we use it like this: 1: <appSettings> 2: <add key="LoggerFilename" value="Log.txt"/> 3: </appSettings> 4: <unity xmlns="http://schemas.microsoft.com/practices/2010/unity"> 5: <container> 6: <register type="MyNamespace.ILogger, MyAssembly" mapTo="MyNamespace.ConsoleLogger, MyAssembly"/> 7: <register type="MyNamespace.ILogger, MyAssembly" mapTo="MyNamespace.FileLogger, MyAssembly" name="File"> 8: <lifetime type="singleton"/> 9: <property name="Filename"> 10: <appSettings appSettingsKey="LoggerFilename"/> 11: </property> 12: </register> 13: </container> 14: </unity> If we would like to inject the value as a constructor parameter, it would be instead: 1: <unity xmlns="http://schemas.microsoft.com/practices/2010/unity"> 2: <sectionExtension type="MyNamespace.AppSettingsParameterInjectionElementExtension, MyAssembly" /> 3: <container> 4: <register type="MyNamespace.ILogger, MyAssembly" mapTo="MyNamespace.ConsoleLogger, MyAssembly"/> 5: <register type="MyNamespace.ILogger, MyAssembly" mapTo="MyNamespace.FileLogger, MyAssembly" name="File"> 6: <lifetime type="singleton"/> 7: <constructor> 8: <param name="filename" type="System.String"> 9: <appSettings appSettingsKey="LoggerFilename"/> 10: </param> 11: </constructor> 12: </register> 13: </container> 14: </unity> Notice the appSettings section, where we add a LoggerFilename entry, which is the same as the one referred by our AppSettingsParameterInjectionElementExtension extension. For more advanced behavior, you can add a TypeConverterName attribute to the appSettings declaration, where you can pass an assembly qualified name of a class that inherits from TypeConverter. This class will be responsible for converting the appSettings value to a destination type. Injection By Attribute If we would like to use attributes instead, we need to create a custom attribute by inheriting from DependencyResolutionAttribute: 1: [Serializable] 2: [AttributeUsage(AttributeTargets.Parameter | AttributeTargets.Property, AllowMultiple = false, Inherited = true)] 3: public sealed class AppSettingsDependencyResolutionAttribute : DependencyResolutionAttribute 4: { 5: public AppSettingsDependencyResolutionAttribute(String appSettingsKey) 6: { 7: this.AppSettingsKey = appSettingsKey; 8: } 9:  10: public String TypeConverterTypeName 11: { 12: get; 13: set; 14: } 15:  16: public String AppSettingsKey 17: { 18: get; 19: private set; 20: } 21:  22: public override IDependencyResolverPolicy CreateResolver(Type typeToResolve) 23: { 24: return (new AppSettingsParameterValueElement() { AppSettingsKey = this.AppSettingsKey, TypeConverterTypeName = this.TypeConverterTypeName }); 25: } 26: } As for file configuration, there is a mandatory property for setting the appSettings key and an optional TypeConverterName  for setting the name of a TypeConverter. Both the custom attribute and the custom section return an instance of the injector AppSettingsParameterValueElement that we implemented in the first place. Now, the attribute needs to be placed before the injected class’ Filename property: 1: public class FileLogger : ILogger 2: { 3: [AppSettingsDependencyResolution("LoggerFilename")] 4: public String Filename 5: { 6: get; 7: set; 8: } 9:  10: #region ILogger Members 11:  12: public void Log(String message) 13: { 14: using (Stream file = File.OpenWrite(this.Filename)) 15: { 16: Byte[] data = Encoding.Default.GetBytes(message); 17: 18: file.Write(data, 0, data.Length); 19: } 20: } 21:  22: #endregion 23: } Or, if we wanted to use constructor injection: 1: public class FileLogger : ILogger 2: { 3: public String Filename 4: { 5: get; 6: set; 7: } 8:  9: public FileLogger([AppSettingsDependencyResolution("LoggerFilename")] String filename) 10: { 11: this.Filename = filename; 12: } 13:  14: #region ILogger Members 15:  16: public void Log(String message) 17: { 18: using (Stream file = File.OpenWrite(this.Filename)) 19: { 20: Byte[] data = Encoding.Default.GetBytes(message); 21: 22: file.Write(data, 0, data.Length); 23: } 24: } 25:  26: #endregion 27: } Usage Just do: 1: ILogger logger = ServiceLocator.Current.GetInstance<ILogger>("File"); And off you go! A simple way do avoid hardcoded values in component registrations. Of course, this same concept can be applied to registry keys, environment values, XML attributes, etc, etc, just change the implementation of the AppSettingsParameterValueElement class. Next stop: custom lifetime managers.

  Read the article

• Is there a Generic USB TouchScreen Driver 12.04?

  - by lbjoum

  Is there a Generic USB TouchScreen Driver 12.04? Device 03eb:201c I've been looking for 4 days solid (not very skilled) and can't find a solution. I have a generic tablet: C97- Atom N2600 9.7" 2GB 32GB Bluetooth WiFi WebCam Ext.3G Windows 7 Tablet PC Using 12.04 and cannot find a driver. I installed android and the touchscreen works but still lots of other bugs. Oh well, stuck with Windows 7 and not happy about it. Will keep trying, but too much time wasted already. If you have a solution I would love to try it. ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf2:6238 ENE Technology, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 005: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter Bus 001 Device 006: ID 090c:3731 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) (from Windows: HID\VID_03EB&PID_201C\6&5F38127&0&0000 USB\VID_03EB&PID_201C\5&193ADADC&1&2 ) Bus 001 Device 007: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 Bus 001 Device 008: ID 192f:0916 Avago Technologies, Pte. ubuntu@ubuntu:~$ sudo lsusb -v Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x03eb Atmel Corp. idProduct 0x201c at90usbkey sample firmware (HID mouse) bcdDevice 45.a2 iManufacturer 1 CDT iProduct 2 9.75 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 (Missing must-be-set bit!) (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 5 Device Status: 0x00fb Self Powered Remote Wakeup Enabled Debug Mode ubuntu@ubuntu:~$ sudo lshw ubuntu description: Notebook product: To be filled by O.E.M. (To be filled by O.E.M.) vendor: To be filled by O.E.M. version: To be filled by O.E.M. serial: To be filled by O.E.M. width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: Tiger Hill vendor: INTEL Corporation physical id: 0 version: To be filled by O.E.M. serial: To be filled by O.E.M. slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 4.6.5 date: 08/24/2012 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 400MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 800 MHz (1.2 ns) vendor: 69 physical id: 1 serial: 00000210 slot: DIMM1 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 1600MHz capabilities: ht configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical *-pci description: Host bridge product: Atom Processor D2xxx/N2xxx DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display UNCLAIMED description: VGA compatible controller product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list configuration: latency=0 resources: memory:dfe00000-dfefffff ioport:f100(size=8) *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:42 memory:dff00000-dff03fff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152) *-usb:0 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f0a0(size=32) *-usb:1 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f080(size=32) *-usb:2 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f060(size=32) *-usb:3 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f040(size=32) *-usb:4 description: USB controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:dff05000-dff053ff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: N10/ICH7 Family SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f020(size=16) memory:dff04000-dff043ff *-disk description: ATA Disk product: BIWIN SSD physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1206 serial: 123403501060 size: 29GiB (32GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8fbe402b *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 249bde5d-8246-9a40-88c7-2d5e3bcaf692 size: 19GiB capacity: 19GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-04-04 02:27:51 filesystem=ntfs state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: de12d40f-d5ca-8642-b306-acd9349fda1a size: 10231MiB capacity: 10GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-04-04 01:52:26 filesystem=ntfs state=clean *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:f000(size=32) *-scsi:0 physical id: 2 bus info: usb@1:1 logical name: scsi4 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb size: 29GiB (31GB) capabilities: partitioned partitioned:dos configuration: signature=00017463 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@4:0.0.0,1 logical name: /dev/sdb1 logical name: /cdrom version: FAT32 serial: 129b-4f87 size: 29GiB capacity: 29GiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-scsi:1 physical id: 3 bus info: usb@1:3.1 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdc size: 7400MiB (7759MB) capabilities: partitioned partitioned:dos configuration: signature=c3072e18 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@6:0.0.0,1 logical name: /dev/sdc1 logical name: /media/JOUM8G version: FAT32 serial: e676-9311 size: 7394MiB capacity: 7394MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat label=Android mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Plus More Enterprise LTD. USB-compliant keyboard id=10 [slave pointer (2)] ? ? USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Plus More Enterprise LTD. USB-compliant keyboard id=9 [slave keyboard (3)] ? USB 2.0 Webcam - Front id=12 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=13 [slave keyboard (3)] ubuntu@ubuntu:~$

  Read the article

• NHibernate Conventions

  - by Ricardo Peres

  Introduction It seems that nowadays everyone loves conventions! Not the ones that you go to, but the ones that you use, that is! It just happens that NHibernate also supports conventions, and we’ll see exactly how. Conventions in NHibernate are supported in two ways: Naming of tables and columns when not explicitly indicated in the mappings; Full domain mapping. Naming of Tables and Columns Since always NHibernate has supported the concept of a naming strategy. A naming strategy in NHibernate converts class and property names to table and column names and vice-versa, when a name is not explicitly supplied. In concrete, it must be a realization of the NHibernate.Cfg.INamingStrategy interface, of which NHibernate includes two implementations: DefaultNamingStrategy: the default implementation, where each column and table are mapped to identically named properties and classes, for example, “MyEntity” will translate to “MyEntity”; ImprovedNamingStrategy: underscores (_) are used to separate Pascal-cased fragments, for example, entity “MyEntity” will be mapped to a “my_entity” table. The naming strategy can be defined at configuration level (the Configuration instance) by calling the SetNamingStrategy method: 1: cfg.SetNamingStrategy(ImprovedNamingStrategy.Instance); Both the DefaultNamingStrategy and the ImprovedNamingStrategy classes offer singleton instances in the form of Instance static fields. DefaultNamingStrategy is the one NHibernate uses, if you don’t specify one. Domain Mapping In mapping by code, we have the choice of relying on conventions to do the mapping automatically. This means a class will inspect our classes and decide how they will relate to the database objects. The class that handles conventions is NHibernate.Mapping.ByCode.ConventionModelMapper, a specialization of the base by code mapper, NHibernate.Mapping.ByCode.ModelMapper. The ModelMapper relies on an internal SimpleModelInspector to help it decide what and how to map, but the mapper lets you override its decisions.  You apply code conventions like this: 1: //pick the types that you want to map 2: IEnumerable<Type> types = Assembly.GetExecutingAssembly().GetExportedTypes(); 3:  4: //conventions based mapper 5: ConventionModelMapper mapper = new ConventionModelMapper(); 6:  7: HbmMapping mapping = mapper.CompileMappingFor(types); 8:  9: //the one and only configuration instance 10: Configuration cfg = ...; 11: cfg.AddMapping(mapping); This is a very simple example, it lacks, at least, the id generation strategy, which you can add by adding an event handler like this: 1: mapper.BeforeMapClass += (IModelInspector modelInspector, Type type, IClassAttributesMapper classCustomizer) => 2: { 3: classCustomizer.Id(x => 4: { 5: //set the hilo generator 6: x.Generator(Generators.HighLow); 7: }); 8: }; The mapper will fire events like this whenever it needs to get information about what to do. And basically this is all it takes to automatically map your domain! It will correctly configure many-to-one and one-to-many relations, choosing bags or sets depending on your collections, will get the table and column names from the naming strategy we saw earlier and will apply the usual defaults to all properties, such as laziness and fetch mode. However, there is at least one thing missing: many-to-many relations. The conventional mapper doesn’t know how to find and configure them, which is a pity, but, alas, not difficult to overcome. To start, for my projects, I have this rule: each entity exposes a public property of type ISet<T> where T is, of course, the type of the other endpoint entity. Extensible as it is, NHibernate lets me implement this very easily: 1: mapper.IsOneToMany((MemberInfo member, Boolean isLikely) => 2: { 3: Type sourceType = member.DeclaringType; 4: Type destinationType = member.GetMemberFromDeclaringType().GetPropertyOrFieldType(); 5:  6: //check if the property is of a generic collection type 7: if ((destinationType.IsGenericCollection() == true) && (destinationType.GetGenericArguments().Length == 1)) 8: { 9: Type destinationEntityType = destinationType.GetGenericArguments().Single(); 10:  11: //check if the type of the generic collection property is an entity 12: if (mapper.ModelInspector.IsEntity(destinationEntityType) == true) 13: { 14: //check if there is an equivalent property on the target type that is also a generic collection and points to this entity 15: PropertyInfo collectionInDestinationType = destinationEntityType.GetProperties().Where(x => (x.PropertyType.IsGenericCollection() == true) && (x.PropertyType.GetGenericArguments().Length == 1) && (x.PropertyType.GetGenericArguments().Single() == sourceType)).SingleOrDefault(); 16:  17: if (collectionInDestinationType != null) 18: { 19: return (false); 20: } 21: } 22: } 23:  24: return (true); 25: }); 26:  27: mapper.IsManyToMany((MemberInfo member, Boolean isLikely) => 28: { 29: //a relation is many to many if it isn't one to many 30: Boolean isOneToMany = mapper.ModelInspector.IsOneToMany(member); 31: return (!isOneToMany); 32: }); 33:  34: mapper.BeforeMapManyToMany += (IModelInspector modelInspector, PropertyPath member, IManyToManyMapper collectionRelationManyToManyCustomizer) => 35: { 36: Type destinationEntityType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 37: //set the mapping table column names from each source entity name plus the _Id sufix 38: collectionRelationManyToManyCustomizer.Column(destinationEntityType.Name + "_Id"); 39: }; 40:  41: mapper.BeforeMapSet += (IModelInspector modelInspector, PropertyPath member, ISetPropertiesMapper propertyCustomizer) => 42: { 43: if (modelInspector.IsManyToMany(member.LocalMember) == true) 44: { 45: propertyCustomizer.Key(x => x.Column(member.LocalMember.DeclaringType.Name + "_Id")); 46:  47: Type sourceType = member.LocalMember.DeclaringType; 48: Type destinationType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 49: IEnumerable<String> names = new Type[] { sourceType, destinationType }.Select(x => x.Name).OrderBy(x => x); 50:  51: //set inverse on the relation of the alphabetically first entity name 52: propertyCustomizer.Inverse(sourceType.Name == names.First()); 53: //set mapping table name from the entity names in alphabetical order 54: propertyCustomizer.Table(String.Join("_", names)); 55: } 56: }; We have to understand how the conventions mapper thinks: For each collection of entities found, it will ask the mapper if it is a one-to-many; in our case, if the collection is a generic one that has an entity as its generic parameter, and the generic parameter type has a similar collection, then it is not a one-to-many; Next, the mapper will ask if the collection that it now knows is not a one-to-many is a many-to-many; Before a set is mapped, if it corresponds to a many-to-many, we set its mapping table. Now, this is tricky: because we have no way to maintain state, we sort the names of the two endpoint entities and we combine them with a “_”; for the first alphabetical entity, we set its relation to inverse – remember, on a many-to-many relation, only one endpoint must be marked as inverse; finally, we set the column name as the name of the entity with an “_Id” suffix; Before the many-to-many relation is processed, we set the column name as the name of the other endpoint entity with the “_Id” suffix, as we did for the set. And that’s it. With these rules, NHibernate will now happily find and configure many-to-many relations, as well as all the others. You can wrap this in a new conventions mapper class, so that it is more easily reusable: 1: public class ManyToManyConventionModelMapper : ConventionModelMapper 2: { 3: public ManyToManyConventionModelMapper() 4: { 5: base.IsOneToMany((MemberInfo member, Boolean isLikely) => 6: { 7: return (this.IsOneToMany(member, isLikely)); 8: }); 9:  10: base.IsManyToMany((MemberInfo member, Boolean isLikely) => 11: { 12: return (this.IsManyToMany(member, isLikely)); 13: }); 14:  15: base.BeforeMapManyToMany += this.BeforeMapManyToMany; 16: base.BeforeMapSet += this.BeforeMapSet; 17: } 18:  19: protected virtual Boolean IsManyToMany(MemberInfo member, Boolean isLikely) 20: { 21: //a relation is many to many if it isn't one to many 22: Boolean isOneToMany = this.ModelInspector.IsOneToMany(member); 23: return (!isOneToMany); 24: } 25:  26: protected virtual Boolean IsOneToMany(MemberInfo member, Boolean isLikely) 27: { 28: Type sourceType = member.DeclaringType; 29: Type destinationType = member.GetMemberFromDeclaringType().GetPropertyOrFieldType(); 30:  31: //check if the property is of a generic collection type 32: if ((destinationType.IsGenericCollection() == true) && (destinationType.GetGenericArguments().Length == 1)) 33: { 34: Type destinationEntityType = destinationType.GetGenericArguments().Single(); 35:  36: //check if the type of the generic collection property is an entity 37: if (this.ModelInspector.IsEntity(destinationEntityType) == true) 38: { 39: //check if there is an equivalent property on the target type that is also a generic collection and points to this entity 40: PropertyInfo collectionInDestinationType = destinationEntityType.GetProperties().Where(x => (x.PropertyType.IsGenericCollection() == true) && (x.PropertyType.GetGenericArguments().Length == 1) && (x.PropertyType.GetGenericArguments().Single() == sourceType)).SingleOrDefault(); 41:  42: if (collectionInDestinationType != null) 43: { 44: return (false); 45: } 46: } 47: } 48:  49: return (true); 50: } 51:  52: protected virtual new void BeforeMapManyToMany(IModelInspector modelInspector, PropertyPath member, IManyToManyMapper collectionRelationManyToManyCustomizer) 53: { 54: Type destinationEntityType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 55: //set the mapping table column names from each source entity name plus the _Id sufix 56: collectionRelationManyToManyCustomizer.Column(destinationEntityType.Name + "_Id"); 57: } 58:  59: protected virtual new void BeforeMapSet(IModelInspector modelInspector, PropertyPath member, ISetPropertiesMapper propertyCustomizer) 60: { 61: if (modelInspector.IsManyToMany(member.LocalMember) == true) 62: { 63: propertyCustomizer.Key(x => x.Column(member.LocalMember.DeclaringType.Name + "_Id")); 64:  65: Type sourceType = member.LocalMember.DeclaringType; 66: Type destinationType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 67: IEnumerable<String> names = new Type[] { sourceType, destinationType }.Select(x => x.Name).OrderBy(x => x); 68:  69: //set inverse on the relation of the alphabetically first entity name 70: propertyCustomizer.Inverse(sourceType.Name == names.First()); 71: //set mapping table name from the entity names in alphabetical order 72: propertyCustomizer.Table(String.Join("_", names)); 73: } 74: } 75: } Conclusion Of course, there is much more to mapping than this, I suggest you look at all the events and functions offered by the ModelMapper to see where you can hook for making it behave the way you want. If you need any help, just let me know!

  Read the article

• How can I troubleshoot flash player/hardware conflict?

  - by sparthikas

  OBJECTIVE: Have a web browser on my Ubuntu install that can play youtube and hulu videos. Also would like to understand problem so that I can fix it again if I change software. Workarounds welcome, technical understanding and solution preferable. SYMPTOMS: Flash does not run - cannot make the right-click menu appear, an empty box is where video should be, changes to black box when hovering over other links. The "The Adobe Flash plugin has crashed" message does not appear with its sad lego face. cannot activate proprietary graphics driver - causes system to reboot to a prompt. SOLUTIONS TRIED: Replaced OS (tried slackware 13.37, fedora 17, linuxmint 13 maya, gentoo, lubuntu, and even winXP. lubuntu confirmed to work, don't remember how much tweaking, if any, this required. Slack, fedora, mint, and gentoo all failed to run flash just like ubuntu) many reinstalls of flash player via different methods, including cleaning up old installs first, also tried gnash and lightspark. replaced graphics card (replaced HIS IceQ Radeon HD 4670 AGP with older GeForce 5700 LE no change in problem) flash does successfully work on winXP installation with Catalyst AGP hotfix driver applied, however I consider windows wholly unacceptable for web browsing due to lack of security. Lubuntu install also works, however I do not want to be tied down to just using Lubuntu on this computer. SYSINFO: Have latest versions of Ubuntu, Firefox, and Flash on fresh Ubuntu install. Using Gigabyte 7s748 motherboard with Athlon XP 2800+ and 3 GB of RAM with Radeon HD 4670 AGP card, also a Dell soundblaster live series sound card (due to malfunction of onboard sound on motherboard) Wired internet connection, Maxtor 6Y120L3 HDD, Sony DVD RW AW-Q170A, Dell M993s monitor. NOTES: I do not know if the graphics driver issue and the flash troubles are linked. Substitution of older graphics card having same flash troubles seems to suggest they aren't. My troubleshooting method is rather reductionist, consisting mainly of "replace things until you find out what was causing the error by process of elimination" only it seems that this must be a conflict which arises when software decides how to configure itself on my hardware. That is, I know the hardware can run Flash, and I know that on other systems the same software can too, but somehow the combination fails. Consequently I feel out of my depth. I will keep trying things off and on, but I have spent probably about 30 man-hours in the last 4 months working on this problem with no joy other than the lubuntu workaround. Any help will be appreciated, I will be checking back and posting updates. Any pertinent questions regarding me or my computer will be answered, outputs from config files can be accessed and posted (IDK which ones or what parts to post).

  Read the article

• DNS server not functioning correctly

  - by Shamit Shrestha

  I have setup a DNS server which isnt working properly. My domain is accswift.com which has glued to two name servers ns1.accswift.com and ns2.accswift.com for the same IP address - 203.78.164.18. On domain end everything should be fine. Please check -http://www.intodns.com/accswift.com I am sure its the problem with the linux server. Can anyone help me find where the problem is for me? Below is the settings that I have in the server. ====================== DIG [root@accswift ~]# dig accswift.com ; << DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.6 << accswift.com ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: NOERROR, id: 11275 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2 ;; QUESTION SECTION: ;accswift.com. IN A ;; ANSWER SECTION: accswift.com. 38400 IN A 203.78.164.18 ;; AUTHORITY SECTION: accswift.com. 38400 IN NS ns1.accswift.com. accswift.com. 38400 IN NS ns2.accswift.com. ;; ADDITIONAL SECTION: ns1.accswift.com. 38400 IN A 203.78.164.18 ns2.accswift.com. 38400 IN A 203.78.164.18 ;; Query time: 1 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Wed Nov 6 20:12:16 2013 ;; MSG SIZE rcvd: 114 ============== IP Tables settings vi /etc/sysconfig/iptables *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -o eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_OUT: -A FORWARD -i eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_IN: -A OUTPUT -o eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_OUT: -A INPUT -i eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_IN: -A INPUT -p udp -m udp --sport 53 -j ACCEPT -A OUTPUT -p udp -m udp --dport 53 -j ACCEPT COMMIT Completed on Fri Sep 20 04:20:33 2013 Generated by webmin *mangle :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT Completed Generated by webmin *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT ====DNS settings vi /var/named/accswift.com.host $ttl 38400 @ IN SOA ns1.accswift.com. root.ns1.accswift.com. ( 1382936091 10800 3600 604800 38400 ) @ IN NS ns1.accswift.com. @ IN NS ns2.accswift.com. accswift.com. IN A 203.78.164.18 accswift.com. IN NS ns1.accswift.com. www.accswift.com. IN A 203.78.164.18 ftp.accswift.com. IN A 203.78.164.18 m.accswift.com. IN A 203.78.164.18 ns1 IN A 203.78.164.18 ns2 IN A 203.78.164.18 localhost.accswift.com. IN A 127.0.0.1 webmail.accswift.com. IN A 203.78.164.18 admin.accswift.com. IN A 203.78.164.18 mail.accswift.com. IN A 203.78.164.18 accswift.com. IN MX 5 mail.accswift.com. ====Named.conf vi /etc/named.conf options { listen-on port 53 { 127.0.0.1; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { any; }; recursion yes; allow-recursion { localhost; 192.168.2.0/24; }; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; forward first; forwarders {192.168.1.1;}; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; zone "accswift.com" { type master; file "/var/named/accswift.com.hosts"; allow-transfer { 127.0.0.1; localnets; 208.73.211.69; }; }; zone "ns1.accswift.com" { type master; file "/var/named/ns1.accswift.com.hosts"; }; ==================================== Can anybody find any flaw in this? I am still unable to reach accswift.com from any other ISP. But it is browsable from the same network though. Thanks in advance.

  Read the article

• Unable to install Konstruktor program

  - by George Barnick

  I've recently switched to Linux, having a good knowledge of how it works before switching, since I've had experience working with Ubuntu-based servers for several months. I've been trying to install a LEGO CAD program that I have found based on an open source library. Information on that is here. The program I'm looking at is called Konstruktor, and for the most part it should be working. One dependency however does not seem to be able to install. The missing dependency is "kdelibs5", which I know what it is and what it's for, but can't get it to install. When trying to install, I get this error: george@GEORGE-PC:~$ sudo apt-get install kdelibs5 Reading package lists... Done Building dependency tree Reading state information... Done Package kdelibs5 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'kdelibs5' has no installation candidate When trying to install the proper package of Konstruktor for my system, I get this error: george@GEORGE-PC:~$ sudo dpkg -i '/home/george/Downloads/konstruktor_0.9-beta1-2_amd64.deb' Selecting previously unselected package konstruktor. (Reading database ... 224684 files and directories currently installed.) Unpacking konstruktor (from .../konstruktor_0.9-beta1-2_amd64.deb) ... dpkg: dependency problems prevent configuration of konstruktor: konstruktor depends on kdelibs5 (>= 4:4.4.5); however: Package kdelibs5 is not installed. dpkg: error processing konstruktor (--install): dependency problems - leaving unconfigured Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf-2.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for mime-support ... Processing triggers for hicolor-icon-theme ... Processing triggers for shared-mime-info ... Unknown media type in type 'all/all' Unknown media type in type 'all/allfiles' Unknown media type in type 'uri/mms' Unknown media type in type 'uri/mmst' Unknown media type in type 'uri/mmsu' Unknown media type in type 'uri/pnm' Unknown media type in type 'uri/rtspt' Unknown media type in type 'uri/rtspu' Errors were encountered while processing: konstruktor I have tried updating and adding apt repositories for KDE packages, but I continuously get the same error. I tried the package "kdelibs5-dev", which installed fine, but "kdelibs5" won't, and Konstruktor still won't install. I am on Ubuntu 13.10 with GNOME shell on amd64 architecture. Any help would be much appreciated. (originally posted my issue here) Thanks ahead of time.

  Read the article

• Allow Incoming Responses Apache. On Ubuntu 11.10 - Curl

  - by Daniel Adarve

  I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping https://www.veripayment.com/integration/index.php ping: unknown host https://www.veripayment.com/integration/index.php daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms PHP Function in codeigniter public function authorizePayment(){ //--------------------------------------------------- // Authorize a payment //--------------------------------------------------- // Get variables from POST array $post_str = "action=payment&business=" .urlencode($this->input->post('business')) ."&vericode=" .urlencode($this->input->post('vericode')) ."&item_name=" .urlencode($this->input->post('item_name')) ."&item_code=" .urlencode($this->input->post('item_code')) ."&quantity=" .urlencode($this->input->post('quantity')) ."&amount=" .urlencode($this->input->post('amount')) ."&cc_type=" .urlencode($this->input->post('cc_type')) ."&cc_number=" .urlencode($this->input->post('cc_number')) ."&cc_expdate=" .urlencode($this->input->post('cc_expdate_year')).urlencode($this->input->post('cc_expdate_month')) ."&cc_security_code=" .urlencode($this->input->post('cc_security_code')) ."&shipment=" .urlencode($this->input->post('shipment')) ."&first_name=" .urlencode($this->input->post('first_name')) ."&last_name=" .urlencode($this->input->post('last_name')) ."&address=" .urlencode($this->input->post('address')) ."&city=" .urlencode($this->input->post('city')) ."&state_or_province=" .urlencode($this->input->post('state_or_province')) ."&zip_or_postal_code=" .urlencode($this->input->post('zip_or_postal_code')) ."&country=" .urlencode($this->input->post('country')) ."&shipping_address=" .urlencode($this->input->post('shipping_address')) ."&shipping_city=" .urlencode($this->input->post('shipping_city')) ."&shipping_state_or_province=" .urlencode($this->input->post('shipping_state_or_province')) ."&shipping_zip_or_postal_code=".urlencode($this->input->post('shipping_zip_or_postal_code')) ."&shipping_country=" .urlencode($this->input->post('shipping_country')) ."&phone=" .urlencode($this->input->post('phone')) ."&email=" .urlencode($this->input->post('email')) ."&ip_address=" .urlencode($this->input->post('ip_address')) ."&website_unique_id=" .urlencode($this->input->post('website_unique_id')); // Send URL string via CURL $backendUrl = "https://www.veripayment.com/integration/index.php"; $this->curl->create($backendUrl); $this->curl->post($post_str); $return = $this->curl->execute(); $result = array(); // Explode array where blanks are found $resparray = explode(' ', $return); if ($resparray) { // save results into an array foreach ($resparray as $resp) { $keyvalue = explode('=', $resp); if(isset($keyvalue[1])){ $result[$keyvalue[0]] = str_replace('"', '', $keyvalue[1]); } } } return $result; } This gets an empty result array. This function however works well in the previous server where the script was hosted before. No modifications where made whatsoever Thanks in Advance

  Read the article

• Again WPA Connection problem even after changed to latest version ..please help

  - by Renjith G

  I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

  Read the article

• Confirm disk is broken when it passes all diagnostics

  - by Halfgaar

  I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

  Read the article

• Too Few Women in IT!

  - by Yolande

  Last year, only 1% of attendees at Devoxx were women . This year, Devoxx addressed the issue in a panel entitled "Why We Should Target Women." On the panel were Kim Ross, Régina ten Bruggencate, Trisha Gee, Antonio Goncalves and Claude Falguiére. The moderator was Martijn Verburg. The discussion focused on how to attract women to programming and how to get current women programmers to be more active in the community. The panelists agreed that the IT field should not just attract more women but also men of different ethnic backgrounds. The lack of women in programming is in part a cultural issue that differs from region to region. In developed countries, very few women work as programmers whereas in Brazil and India a lot of women pursue careers in IT.  Women in developed countries perceive the field as isolating and very few young women graduate in computer science.  This perception of isolation was based in reality decades ago, but that is no longer the case today. Main ideas discussed by the panel: - Parents should encourage their daughters to play with Lego and learn programming - More organizations should target girls in high schools and young women in university to expose them to programming.  Duchess organization is planning on being more involved with young girl events and mentoring. - Women tend to be more self-critical about their skills and are intimidated by high skill requirements in job advertisements. Companies should change job advertisements to get more women to interviews. - Panelists don't recommend affirmative action because women feel favored and lose credibility. They want to be judged for their skills. - Panelists recommend acting the same way when dealing with either female or male co-workers and managers - Women need mentors (men or women) to learn to become speakers at conferences and to promote themselves better - Men should be sensitive to the fact that women are alone at work to respond to men teasing. The balance of power at work is different from a social setting. - Men also experience discrimination on the job. It is more difficult for men to take time off when their children are sick, for example. Equal valuing of parental obligations could result in equal pay for women. See also: Trisha Gee Blog - http://mechanitis.blogspot.com/ Duchess Organization - http://www.jduchess.org/

  Read the article

• SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

  - by digby280

  I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• CodePlex Daily Summary for Tuesday, July 23, 2013

  CodePlex Daily Summary for Tuesday, July 23, 2013Popular ReleasesHome Access Plus+: v9.3: UPDATED RELEASE Fixed: Issue with enabling LDAP encryption Added: Encrypted/Signed LDAP Queries Fixed: Wrong Modernizr reference on the setup page Changed: Code on the AD Tree Picker Upgraded: Dynatree Fixed: Removed Dynatree Debug Data Added: Time bar for the current day Added: Code to block booking/removing of bookings after the lesson time has past Fixed: New sidebar position issue Added: Decode for the NotesMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.4: Magelia WebStore version 2.4 introduces new and improved features: Basket and order calculation have been redesigned with a more modular approach geographic zone algorithms for tax and shipping calculations have been re-developed. The Store service has been split in three services (store, basket, order). Product start and end dates have been added. For variant products a unique code has been introduced for the top (variable) product, product attributes can now be defined at the top ...GoAgent GUI: GoAgent GUI 1.3.0 Beta: ??????????： Windows XP SP3 Windows Vista SP1 Windows 7 Windows 8 Windows 8.1 ??Windows 8.1???????????? ????： .Net Framework 4.0 http://59.111.20.19/download/17718/33240761/4/exe/69/54/17718_1/dotNetFx40_Full_x86_x64.exe Microsoft Visual C++ 2010 Redistributable Package http://59.111.20.23/download/4894298/8555584/1/exe/28/176/1348305610524_944/vcredist_x86.exe ???????????????。 ?????????????，??????????，??????????????（????） ?????Windows XP?Windows 7????，???????????，?issue??????。uygw@outlook.comLINQ to Twitter: LINQ to Twitter v2.1.08: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.AndroidCopyAndPaste: Capood: Erstes Release für Evaluation --> Changeset 26675fastJSON: v2.0.17: 2.0.17 - added serialization of static fields and properties - added dynamic object support and testKartris E-commerce: Kartris v2.5002: This is the release version of Kartris with the responsive interface based on Zurb's Foundation framework. It will work on any screen size, down to and including mobile devices such as the iphone. We've also fixed issues with Apple iOS products being treated by ASP.NET as 'downscale' devices, which broke some functionality in Kartris. This release also includes native Bitcoin support (no third party services required - it communicates directly with the standard Bitcoin client via a JSON API)...VG-Ripper & PG-Ripper: PG-Ripper 1.4.15: changes NEW: Added Support for "ImgChili.net" links NEW: Added Support for "ImgBabes.com" linksAcDown?????: AcDown????? v4.4.3: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.4.3 ?? ??Bilibili????????????? ???????????? ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2.10?...Magick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/C# Intellisense for Notepad++: Initial release: Members auto-complete Integration with native Notepad++ Auto-Completion Auto "open bracket" for methods Right-arrow to accept suggestions51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...Centrify DirectControl PowerShell Module: 1.5.709: -fix- Computer password is correctly set when preparing Computer account for Self-Service join and hostname is longer than 14 charsDLog: DLog v1.0: Log v1.0SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesOrchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0New ProjectsAerCloud.net FaceTools Client - Python, Linux & Windows: This project source code provides a step by step guide for using AerCloud.net Framework as a Service API. For more information please visit http://www.aercloudCode Snippet Manager: It is a simple Code Snippet Manager.. that I use when presenting tutorials. Features: - Insert a code snippet from the clipboard into program - Delete code sniDeutschWortSammler: A tiny English-German dictionary.DNN Testimonials: Virtual Essentials is a custom software development company. We strive to put joy back into the lives of people by removing the pain points through technologyDXWTEC: legsGoldenDream TeamWork: CourseWork for DB Course in Telerik Academy. Kpaint: Our work with Kpaint has proven to have provide highly accurate results mostly with the exception of occasion jittery of the paint brush. The voice recognition LAura: LAura checks the presence status of the currently signed in User and colorizes the Windows Window Color.MAPIFolders: MAPIFolders is intended as a successor to PFDAVAdmin and ExFolders.Microsoft Lab of Things Analytics: This is a project by students at University College London. We are creating analytics that will add value to home automation leveraging Microsoft Lab of Things.MySitelongdream: My siteMyTestSolution: this is a solution used just for laboratory purposeOrchestrator EventLog Integration Pack: Orchestrator Integration Pack to write spezific events in any Event Log.Planter's Supermarket: sdfResize images before upload: It will resize all images in folder recursively and store them in a store accountsampletranscodeffmpeg: a project for transcode for joyseeSCSM Perf Test Harness: Source Code for Travis Wright's LoadGen Tool for Service Manager. Simple Compression: Simple Compression is a .Net library that provides compression methods for use in an application.The Memory Game: This was my first WPF application.What day of the week is your birthday?: A program that can find the day of the week you were born!!!!!Windows Recovery Software: Recover Data Software for windows helps you to recover all type of data which has been lost due to several reasons.Xjs: Javascript framework to allow faster web development on the browser side

  Read the article

• CodePlex Daily Summary for Saturday, November 27, 2010

  CodePlex Daily Summary for Saturday, November 27, 2010Popular ReleasesMahTweets for Windows Phone: Nightly 69: Latest nightly for build 69XamlQuery/WPF - The Write Less, Do More, WPF Library: XamlQuery-WPF v1.2 (Runtime, Source): This is the first release of popular XamlQuery library for WPF. XamlQuery has already gained recognition among Silverlight developers.Math.NET Numerics: Beta 1: First beta of Math.NET Numerics. Only contains the managed linear algebra provider. Beta 2 will include the native linear algebra providers along with better documentation and examples.WatchersNET.SiteMap: WatchersNET.SiteMap 01.03.02: Whats NewNew Tax Filter, You can now select which Terms you want to Use.Minecraft GPS: Minecraft GPS 1.1: 1.1 Release New Features Compass! New style. Set opacity on main window to allow overlay of Minecraft.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-11-25: Code samples for Visual Studio 2010Typps (formerly jiffycms) wysiwyg rich text HTML editor for ASP.NET AJAX: Typps 2.9: -When uploading files (not images), through the file uploader and the multi-file uploader, FileUploaded and MultiFileUploaded event handlers were reporting an empty event argument, this is fixed now. -Fixed also url field not updating when uploading a file ( not image)Wii Backup Fusion: Wii Backup Fusion 0.8.5 Beta: - WBFS repair (default) options fixed - Transfer to image fixed - Settings ui widget names fixed - Some little bug fixes You need to reset the settings! Delete WiiBaFu's config file or registry entries on windows: Linux: ~/.config/WiiBaFu/wiibafu.conf Windows: HKEY_CURRENT_USER\Software\WiiBaFu\wiibafu Mac OS X: ~/Library/Preferences/com.wiibafu.wiibafu.plist Caution: This is a BETA version! Errors, crashes and data loss not impossible! Use in test environments only, not on productive syste...Minemapper: Minemapper v0.1.3: Added process count and world size calculation progress to the status bar. Added View->'Status Bar' menu item to show/hide the status bar. Status bar is automatically shown when loading a world. Added a prompt, when loading a world, to use or clear cached images.SQL Monitor: SQL Monitor 1.4: 1.added automatically load sql server instances 2.added friendly wait cursor 3.fixed problem with 4.0 fx 4.added exception handlingSexy Select: sexy select v0.4: Changes in v0.4 Added method : elements. This returns all the option elements that are currently added to the select list Added method : selectOption. This method accepts two values, the element to be modified and the selected state. (true/false)Deep Zoom for WPF: First Release: This first release of the Deep Zoom control has the same source code, binaries and demos as the CodeProject article (http://www.codeproject.com/KB/WPF/DeepZoom.aspx).Simple Service Locator: Simple Service Locator v0.12: The Simple Service Locator is an easy-to-use Inversion of Control library that is a complete implementation of the Common Service Locator interface. It solely supports code-based configuration and is an ideal starting point for developers unfamiliar with larger IoC / DI libraries New features in this release Collections that are registered using RegisterAll<T> can now be injected using automatic constructor injection. A new RegisterAll<T>(params T[]) method overload is added that allows ea...BlogEngine.NET: BlogEngine.NET 2.0 RC: This is a Release Candidate version for BlogEngine.NET 2.0. The most current, stable version of BlogEngine.NET is version 1.6. Find out more about the BlogEngine.NET 2.0 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation and the installation screencast. If you are upgrading from a previous version, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. As this ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.156: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a feature for aggregating the overall metrics in a folder full of NodeXL workbooks, adds geographical coordinates to the Twitter import features, and fixes a memory-related bug. See the Complete NodeXL Release History for details. Please Note: There is a new option in the setup program to install for "Just Me" or "Everyone." Most people...VFPX: FoxBarcode v.0.11: FoxBarcode v.0.11 - Released 2010.11.22 FoxBarcode is a 100% Visual FoxPro class that provides a tool for generating images with different bar code symbologies to be used in VFP forms and reports, or exported to other applications. Its use and distribution is free for all Visual FoxPro Community. Whats is new? Added a third parameter to the BarcodeImage() method Fixed some minor bugs History FoxBarcode v.0.10 - Released 2010.11.19 - 85 Downloads Project page: FoxBarcodeDotNetAge -a lightweight Mvc jQuery CMS: DotNetAge 1.1.0.5: What is new in DotNetAge 1.1.0.5 ?Document Library features and template added. Resolve issues of templates Improving publishing service performance Opml support added. What is new in DotNetAge 1.1 ? D.N.A Core updatesImprove runtime performance , more stabilize. The DNA core objects model added. Personalization features added that allows users create the personal website, manage their resources, store personal data DynamicUIFixed the PageManager could not move page node bug. ...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3.1 and demos: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6MDownloader: MDownloader-0.15.24.6966: Fixed Updater; Fixed minor bugs;WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.1: Version: 2.0.0.1 (Milestone 1): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...New ProjectsCommunity Megaphone for Windows Phone: The Official CommunityMegaphone application for Windows Phone. Releases are in XAP format, allowing you to upload the compiled application into a device using the Windows Phone Application Deployment tool. Download the source code to learn how to build Windows Phone applications.Group positioning GPS: this is a project for a subject in the university geographic information systems, its about a group of gadjets that can know the position of the other devices in the same group.IIS HTTPS Binder: On IIS 7 that you can not create more than one HTTPS binding, even though you have more then one SSL certificate and you need HTTPS binding on different hosted websites. If you have one IP address you can bind only one SSL to chosen website. This small application can fix this.Inspired Faith Now Playing: A ClickOnce-deployed desktop application that sits in your application tray and notifies you when any of your favorite Messianic Jewish and Christian artists or songs play on the Inspired Faith online radio station (http://inspiredfaith.org)MA Manager: The goal of this software is to help manage a martial arts school through multiple clients and platforms. This allows instructors to easily track students progress overtime.MathModels: This project contains commonly used algorithm implementations in C# .netMyFlickr API: MyFlickr API is a library for developers allows them to call Flickr API from any .Net Application.NerdOnRails.DynamicProxy: a small dynamic-proxy implementation using the new dynamic object that was introduced with .Net 4.NerdOnRails.Injector: a small dependency injection framework for .netNHyperV: NHyperV is a C# Hyper-V programming model.Power Scheme Switcher: This is a very simple utility that exposes an icon in the system tray and allows you to quickly change the Power Plan Scheme from there. It is developed in c# with Vs 2010(WinForm)rcforms: Custom sharepoint forms exampleRobo Commander: This is a Lego NXT commander developed under Visual Studio. This console will have basic commands and uses the NXT++ libraries. Shared Genomics Project - Workbench Codebase: The Shared Genomics workbench enables a diverse user group of researchers to explore the associations between genetic and other factors in their datasets. It provides a graphical user interface to the analysis functions published in a sister Codeplex project i.e. MPI Codebase.SharePoint 2010 PowerShell v2 reference: This project hosts a complete PowerShell v2 reference for SharePoint 2010.Social PowerFlow: Experiments with PowerWF and the social network - integrating Windows Powershell and Windows Workflow Foundation with Facebook and TwitterTweetSayings: Twitter SayingsXamlQuery/WPF - The Write Less, Do More, WPF Library: XamlQuery/WPF is a lightweight yet powerful library that enables rapid development in WPF. It simplifies several tasks like page/window traversing; finding controls by name, type, style, property value or position in control tree; event handling; animating and much more.XmlDSigEx XML Digital Signature Library: The XmlDSigEx library is an alternative to using the SignedXml classes in the .Net Framework. It addresses some of the shortcomings of the standard types particularly in regards to canonicalisation and the enveloped transform. It is currently under development.Yoi's Online Project: This is online storage for Yovi's project?????? ???? ???: ?????? ???? ?? ????? ??? ?????? ? ??????? ?? ???? ??? ????

  Read the article

• Could not apply the stored configuration for the monitor

  - by dellphi

  I'm using Nvidia 7300 gt and monitor-Acer V173w, on 64 bit Ubuntu 10.04. Compiz and Emerald went well, but at the time of entry into the GUI, I always receive the message : "Could not apply the stored configuration for the monitor, could not find a suitable configuration of screens" Why do I always receive it, and what is wrong with the monitor configuration or pci-e is used? root@dellph1-desktop:/# xrandr Screen 0: minimum 320 x 240, current 1440 x 900, maximum 1440 x 900 default connected 1440x900+0+0 0mm x 0mm 1440x900 50.0* 1024x768 51.0 58.0 59.0 1360x768 52.0 53.0 1152x864 54.0 55.0 56.0 57.0 960x600 60.0 960x540 61.0 896x672 62.0 840x525 63.0 64.0 65.0 66.0 832x624 67.0 800x600 68.0 69.0 70.0 71.0 72.0 73.0 800x512 74.0 720x450 75.0 680x384 76.0 77.0 640x512 78.0 79.0 640x480 80.0 81.0 82.0 83.0 576x432 84.0 85.0 86.0 87.0 512x384 88.0 89.0 90.0 416x312 91.0 400x300 92.0 93.0 94.0 95.0 320x240 96.0 97.0 98.0 root@dellph1-desktop:/# === xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.29 ([email protected]) Wed Dec 8 12:27:27 PST 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: xconfig, VertRefresh source: xconfig Identifier "Monitor0" VendorName "Unknown" ModelName "Acer V173W" HorizSync 30.0 - 83.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 7300 GT" EndSection Section "Screen" # Removed Option "metamodes" " 1440x900_60 +0+0; 1280x1024 +0+0" # Removed Option "metamodes" "1440x900 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1440x900_75 +0+0; 1440x900 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• SSH as root using public key still prompts for password on RHEL 6.1

  - by Dean Schulze

  I've generated rsa keys with cygwin ssh-keygen and copied them to the server with ssh-copy-id -i id_rsa.pub [email protected] I've got the following settings in my /etc/ssh/sshd_config file RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys PermitRootLogin yes When I ssh [email protected] it still prompts for a password. The output below from /usr/sbin/sshd -d says that a matching keys was found in the .ssh/authorized_keys file, but it still requires a password from the client. I've read a bunch of web postings about permissions on files and directories, but nothing works. Is it possible to ssh with keys in RHEL 6.1 or is this forbidden? The debug output from ssh and sshd is below. $ ssh -v [email protected] OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012 debug1: Connecting to my.ip.address [my.ip.address] port 22. debug1: Connection established. debug1: identity file /home/dschulze/.ssh/id_rsa type 1 debug1: identity file /home/dschulze/.ssh/id_rsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_dsa type 2 debug1: identity file /home/dschulze/.ssh/id_dsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 9f:00:e0:1e:a2:cd:05:53:c8:21:d5:69:25:80:39:92 debug1: Host 'my.ip.address' is known and matches the RSA host key. debug1: Found key in /home/dschulze/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/dschulze/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering DSA public key: /home/dschulze/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Trying private key: /home/dschulze/.ssh/id_ecdsa debug1: Next authentication method: password Here is the server output from /usr/sbin/sshd -d [root@ga2-lab .ssh]# /usr/sbin/sshd -d debug1: sshd version OpenSSH_5.3p1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: rexec_argv[0]='/usr/sbin/sshd' debug1: rexec_argv[1]='-d' debug1: Bind to port 22 on 0.0.0.0. Server listening on 0.0.0.0 port 22. debug1: Bind to port 22 on ::. Server listening on :: port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8 debug1: inetd sockets after dupping: 3, 3 Connection from 172.60.254.24 port 53401 debug1: Client protocol version 2.0; client software version OpenSSH_6.1 debug1: match: OpenSSH_6.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user root service ssh-connection method none debug1: attempt 0 failures 0 debug1: PAM: initializing for "root" debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 1 failures 0 debug1: test whether pkalg/pkblob are acceptable debug1: PAM: setting PAM_RHOST to "172.60.254.24" debug1: PAM: setting PAM_TTY to "ssh" debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 Postponed publickey for root from 172.60.254.24 port 53401 ssh2 debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 2 failures 0 debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 debug1: ssh_rsa_verify: signature correct debug1: do_pam_account: called Accepted publickey for root from 172.60.254.24 port 53401 ssh2 debug1: monitor_child_preauth: root has been authenticated by privileged process debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: ssh_gssapi_storecreds: Not a GSSAPI mechanism debug1: restore_uid: 0/0 debug1: SELinux support enabled debug1: PAM: establishing credentials PAM: pam_open_session(): Authentication failure debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/pts/1 ssh_selinux_setup_pty: security_compute_relabel: Invalid argument debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 17323 debug1: session_exit_message: session 0 channel 0 pid 17323 debug1: session_exit_message: release channel 0 debug1: session_pty_cleanup: session 0 release /dev/pts/1 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from 172.60.254.24: 11: disconnected by user debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: deleting credentials

  Read the article

• Network Your Computers & Devices: Step by Step

  - by The Geek

  If you’re looking for a great book to help you learn more about Windows home networking, there’s a new book on the market by our good friend Ciprian, and published by none other than Microsoft Press. Note: our friend Ciprian has been a guest contributor here on How-To Geek in the past, and he’s not only a geek that knows what he’s talking about, he’s also one of the more honest and decent people I’ve worked with. In his spare time, he runs the 7 Tutorials web site. The Book One of the great things about this book is that you aren’t limited to just Windows networking—it also explains how to connect Windows 7, XP, Vista, Mac OS X, and even Linux on the same network and share folders and devices between them. Everything in the book is written in a typical How-To Geek step-by-step format, with plenty of screenshots and pictures to help you through the process. Book Outline If you’re going to be spending some money on the book, you probably want to know what it’s all about, and since the Amazon page doesn’t give, well, much information at all, here’s the entire outline for you: Setting Up a Router and Devices Setting User Account on All Computers Setting Up Your Libraries on All Windows 7 Computers Creating the Network Customizing Network Sharing Settings in Windows 7 Creating the Homegroup and Joining Windows 7 Computers Sharing Libraries and Folders Sharing and Working with Devices Streaming Media Over the Network and the Internet Sharing Between Windows XP, Windows Vista, and Windows 7 Computers Sharing Between Mac OS X and Windows 7 Computers Sharing Between Ubuntu Linux and Windows 7 Computers Keeping the Network Secure Setting Up Parental Controls Troubleshooting Network and Internet Problems It’s a great book, with loads of information, and compared to most tech books isn’t very expensive—only $19.79 for the paperback and $9.99 for the Kindle version. Well worth it, and hey, it’s an official Microsoft Press book—written by a How-To Geek guest author. Network Your Computers & Devices Step by Step [Amazon] Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC 2011 International Space Station Calendar Available for Download (Free) Ultimate Elimination – Lego Black Ops [Video] BotSync Enables Secure FTP File Synchronization on Android Devices Enjoy Beautiful City Views with the Cityscape Theme for Windows 7 Luigi Installs Any OS on Google’s Cr-48 Notebook DIY iPad Stylus Offers Pen-Based Interaction on the Cheap

  Read the article

• ssh login successful, but scp password gives me "Permission denied"

  - by YANewb

  I'm trying to get some blogging software up on an organizational remote server. I tried to set up a SSH Key but was having problems and decided that getting the blog up and running was more important than dealing with the SSH Key issue, so I ssh-keygen -R remoteserver.com. Now I can successfully login with ssh -v [email protected] and the correct password. Once logged in I can move around and read any file and directory that I should be able to read. But when I try to edit an existing -rw-r--r-- file with VIM, it shows up as read-only, if I try to edit permissions I get chmod: file.ext: Operation not permitted, and if I try to scp a new file from my local machine I'm prompted for the remote user's password, and then get scp: /home/path/to/file.ext: Permission denied. Since I didn't have any of these problems before I tried to set up the ssh key, I suspect these anomalies are a side effect of that, but I don't know how to troubleshoot this. So what does a foolish server-newb, such as myself, need to do to get edit capability back as a remote user? Addendum 1: My userids are different between my local machine and the remote server. For ssh I ssh -v [email protected]. if I whoami I get remoteuser For scp I scp file.ext [email protected]:/path/to/file.ext from the local directory with file.ext while logged in as the local user. if I whoami I get localuser The ls -l for two different files I've tried scp: -rw-r--r--@ 1 localuser localgroup 20 Feb 11 21:03 phpinfo.php -rw-r--r-- 1 root localgroup 4 Feb 11 22:32 test.txt The ls -l for the file I've tried to VIM: -rw-r--r-- 1 remoteuser remotegroup 76 Jul 27 2009 info.txt Addendum 2: In the past I've set up ssh-keys for git repositories. I don't want to completely destroy them, so in an attempt to follow a deer's train of thinking I renamed my ~/.ssh/ to ~/.ssh-bak/, then tested the different types of access. The abridged version of the terminal commands and results is below; I think everything is working until the 8th line from the end. localcomputer:~ localuser$ ssh -v [email protected] OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to remoteserver.com [###.###.###.###] port 22. debug1: Connection established. debug1: identity file /Users/localuser/.ssh/identity type -1 debug1: identity file /Users/localuser/.ssh/id_rsa type -1 debug1: identity file /Users/localuser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p2 FreeBSD-20110503 debug1: match: OpenSSH_5.8p2 FreeBSD-20110503 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY The authenticity of host 'remoteserver.com (###.###.###.###)' can't be established. RSA key fingerprint is ##:##:##:##:##:##:##:##:##:##:##:##:##:##:##:##. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'remoteserver.com,###.###.###.###' (RSA) to the list of known hosts. debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/localuser/.ssh/identity debug1: Trying private key: /Users/localuser/.ssh/id_rsa debug1: Trying private key: /Users/localuser/.ssh/id_dsa debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. Last login: Sun Feb 12 18:00:54 2012 from 68.69.164.123 FreeBSD 6.4-RELEASE-p8 (VKERN) #1 r101746: Mon Aug 30 10:34:40 MDT 2010 [remoteuser@remoteserver /home]$ ls -l total ### -rw-r--r-- 1 remoteuser remotegroup 76 Aug 12 2009 info.txt [remoteuser@remoteserver /home]$ vim info.txt ~ {at the bottom of the VIM screen it tells me it's [read only]} [remoteuser@remoteserver /home]$ whoami remoteuser [remoteuser@remoteserver /home]$ logout debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0 debug1: channel 0: free: client-session, nchannels 1 Connection to remoteserver.com closed. Transferred: sent 3872, received 12496 bytes, in 107.4 seconds Bytes per second: sent 36.1, received 116.4 debug1: Exit status 0 localcomputer:localdirectory name$ scp -v phpinfo.php [email protected]:/home/www/remotedirectory/phpinfo.php Executing: program /usr/bin/ssh host remoteserver.com, user remoteuser, command scp -v -t /home/www/remotedirectory/phpinfo.php OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to remoteserver.com [###.###.###.###] port 22. debug1: Connection established. debug1: identity file /Users/localuser/.ssh/identity type -1 debug1: identity file /Users/localuser/.ssh/id_rsa type -1 debug1: identity file /Users/localuser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p2 FreeBSD-20110503 debug1: match: OpenSSH_5.8p2 FreeBSD-20110503 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'remoteserver.com' is known and matches the RSA host key. debug1: Found key in /Users/localuser/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/localuser/.ssh/identity debug1: Trying private key: /Users/localuser/.ssh/id_rsa debug1: Trying private key: /Users/localuser/.ssh/id_dsa debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending command: scp -v -t /home/www/remotedirectory/phpinfo.php Sending file modes: C0644 20 phpinfo.php Sink: C0644 20 phpinfo.php scp: /home/www/remotedirectory/phpinfo.php: Permission denied debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: free: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK debug1: fd 1 clearing O_NONBLOCK Transferred: sent 1456, received 2160 bytes, in 0.6 seconds Bytes per second: sent 2322.3, received 3445.1 debug1: Exit status 1

  Read the article

• CISCO 2911 Router configuration

  - by bala

  Device cisco 2911 router configuration support is required please. I have exchange server 2010 configured and working without any errors the problem is in cisco router configuration when exchange server sends emails out the receives WAN IP not the public ip. I have configured RDNS lookups with our MX record IP addesses that match the FQDN but all our emails are rejected because it does not match with the public ip. Receiving mails problem is not an problem all mails are coming through. i am sure i am missing something on the router configuration that does not sends the public ip, can any one help me to solve this issue. Note; I've got 1 WAN IP & 8 Public IP from ISP . Find below the running configuration. Building configuration... Current configuration : 2734 bytes ! ! Last configuration change at 06:32:13 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BSBG-LL ! boot-start-marker boot-end-marker ! ! enable secret 5 $x$xHrxxxxx5ox0 enable password 7 xx23xx5FxxE1xx044 ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! ip flow-cache timeout active 1 ip domain name yourdomain.com ip name-server 213.42.20.20 ip name-server 195.229.241.222 multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 ! ! username bsbg ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.9 255.255.255.0 ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed 100 no cdp enable ! interface GigabitEthernet0/1 ip address 213.42.xx.x2 255.255.255.252 ip nat outside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 120 interface GigabitEthernet0/1 overload ip nat inside source static tcp 192.168.0.4 25 94.56.89.100 25 extendable ip nat inside source static tcp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static udp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static tcp 192.168.0.4 110 94.56.89.100 110 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.100 443 extendable ip nat inside source static tcp 192.168.0.4 587 94.56.89.100 587 extendable ip nat inside source static tcp 192.168.0.4 995 94.56.89.100 995 extendable ip nat inside source static tcp 192.168.0.4 3389 94.56.89.100 3389 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.101 443 extendable ip nat inside source static tcp 192.168.0.12 80 94.56.89.102 80 extendable ip nat inside source static tcp 192.168.0.12 443 94.56.89.102 443 extendable ip nat inside source static tcp 192.168.0.12 3389 94.56.89.102 3389 extendable ip route 0.0.0.0 0.0.0.0 213.42.69.41 ! access-list 120 permit ip 192.168.0.0 0.0.0.255 any ! ! ! control-plane ! ! ! line con 0 exec-timeout 5 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password 7 xx64xxD530D26086Dxx login transport input all ! scheduler allocate 20000 1000 end

  Read the article

• In gnuplot, how to plot with lines but skip missing data points?

  - by Anna

  I've got a value associated to each day, as such: 120530 70.1 120531 69.0 120601 69.2 120602 69.5 # and so on for 200 lines When plotting this data in gnuplot with lines, the data points are nicely connected. Unfortunately, at places over a week of data points can be missing. Gnuplot draws long lines over these intervals. How can I make gnuplot only connect points on consecutive days? Solutions that require preprocessing of the data are fine, as I already smooth it with a script. Here is what I use: set xdata time set timefmt "%y%m%d" plot "vikt_ma.txt" using 1:2 with lines title "first line", \\ "" using 1:3 with lines title "second line" Example:

  Read the article

• Make Your Menu Item Highlighted

  - by Shaun

  When I was working on the TalentOn project (Promotion in MSDN Chinese) I was asked to implement a functionality that makes the top menu items highlighted when the currently viewing page was in that section. This might be a common scenario in the web application development I think.   Simple Example When thinking about the solution of the highlighted menu items the biggest problem would be how to define the sections (menu item) and the pages it belongs to rather than making the menu highlighted. With the ASP.NET MVC framework we can use the controller – action infrastructure for us to achieve it. Each controllers would have a related menu item on the master page normally. The menu item would be highlighted if any of the views under this controller are being shown. Some specific menu items would be highlighted of that action was invoked, for example the home page, the about page, etc. The check rule can be specified on-demand. For example I can define the action LogOn and Register of Account controller should make the Account menu item highlighted while the ChangePassword should make the Profile menu item highlighted. I’m going to use the HtmlHelper to render the highlight-able menu item. The key point is that I need to pass the predication to check whether the current view belongs to this menu item which means this menu item should be highlighted or not. Hence I need a delegate as its parameter. The simplest code would be like this. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: using System.Web.Mvc.Html; 7:  8: namespace ShaunXu.Blogs.HighlighMenuItem 9: { 10: public static class HighlightMenuItemHelper 11: { 12: public static MvcHtmlString HighlightMenuItem(this HtmlHelper helper, 13: string text, string controllerName, string actionName, object routeData, object htmlAttributes, 14: string highlightText, object highlightHtmlAttributes, 15: Func<HtmlHelper, bool> highlightPredicate) 16: { 17: var shouldHighlight = highlightPredicate.Invoke(helper); 18: if (shouldHighlight) 19: { 20: return helper.ActionLink(string.IsNullOrWhiteSpace(highlightText) ? text : highlightText, 21: actionName, controllerName, routeData, highlightHtmlAttributes == null ? htmlAttributes : highlightHtmlAttributes); 22: } 23: else 24: { 25: return helper.ActionLink(text, actionName, controllerName, routeData, htmlAttributes); 26: } 27: } 28: } 29: } There are 3 groups of the parameters: the first group would be the same as the in-build ActionLink method parameters. It has the link text, controller name and action name, etc passed in so that I can render a valid linkage for the menu item. The second group would be more focus on the highlight link text and Html attributes. I will use them to render the highlight menu item. The third group, which contains one parameter, would be a predicate that tells me whether this menu item should be highlighted or not based on the user’s definition. And then I changed my master page of the sample MVC application. I let the Home and About menu highlighted only when the Index and About action are invoked. And I added a new menu named Account which should be highlighted for all actions/views under its Account controller. So my master would be like this. 1: <div id="menucontainer"> 2:  3: <ul id="menu"> 4: <li><% 1: : Html.HighlightMenuItem( 2: "Home", "Home", "Index", null, null, 3: "[Home]", null, 4: helper => helper.ViewContext.RouteData.Values["controller"].ToString() == "Home" 5: && helper.ViewContext.RouteData.Values["action"].ToString() == "Index")%></li> 5:  6: <li><% 1: : Html.HighlightMenuItem( 2: "About", "Home", "About", null, null, 3: "[About]", null, 4: helper => helper.ViewContext.RouteData.Values["controller"].ToString() == "Home" 5: && helper.ViewContext.RouteData.Values["action"].ToString() == "About")%></li> 7:  8: <li><% 1: : Html.HighlightMenuItem( 2: "Account", "Account", "LogOn", null, null, 3: "[Account]", null, 4: helper => helper.ViewContext.RouteData.Values["controller"].ToString() == "Account")%></li> 9: 10: </ul> 11:  12: </div> Note: You need to add the import section for the namespace “ShaunXu.Blogs.HighlighMenuItem” to make the extension method I created below available. So let’s see the result. When the home page was shown the Home menu was highlighted since at this moment it was controller = Home and action = Index. And if I clicked the About menu you can see it turned highlighted as now the action was About. And if I navigated to the register page the Account menu was highlighted since it should be like that when any actions under the Account controller was invoked.   Fluently Language Till now it’s a fully example for the highlight menu item but not perfect yet. Since the most common scenario would be: highlighted when the action invoked, or highlighted when any action was invoked under this controller, we can created 2 shortcut method so for them so that normally the developer will be no need to specify the delegation. Another place we can improve would be, to make the method more user-friendly, or I should say developer-friendly. As you can see when we want to add a highlight menu item we need to specify 8 parameters and we need to remember what they mean. In fact we can make the method more “fluently” so that the developer can have the hints when using it by the Visual Studio IntelliSense. Below is the full code for it. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: using System.Web.Mvc.Html; 7:  8: namespace Ethos.Xrm.HR 9: { 10: #region Helper 11:  12: public static class HighlightActionMenuHelper 13: { 14: public static IHighlightActionMenuProviderAfterCreated HighlightActionMenu(this HtmlHelper helper) 15: { 16: return new HighlightActionMenuProvider(helper); 17: } 18: } 19:  20: #endregion 21:  22: #region Interfaces 23:  24: public interface IHighlightActionMenuProviderAfterCreated 25: { 26: IHighlightActionMenuProviderAfterOn On(string actionName, string controllerName); 27: } 28:  29: public interface IHighlightActionMenuProviderAfterOn 30: { 31: IHighlightActionMenuProviderAfterWith With(string text, object routeData, object htmlAttributes); 32: } 33:  34: public interface IHighlightActionMenuProviderAfterWith 35: { 36: IHighlightActionMenuProviderAfterHighlightWhen HighlightWhen(Func<HtmlHelper, bool> predicate); 37: IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerMatch(); 38: IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerAndActionMatch(); 39: } 40:  41: public interface IHighlightActionMenuProviderAfterHighlightWhen 42: { 43: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes, string highlightText); 44: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes); 45: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass, string highlightText); 46: IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass); 47: } 48:  49: public interface IHighlightActionMenuProviderAfterApplyHighlightStyle 50: { 51: MvcHtmlString ToActionLink(); 52: } 53:  54: #endregion 55:  56: public class HighlightActionMenuProvider : 57: IHighlightActionMenuProviderAfterCreated, 58: IHighlightActionMenuProviderAfterOn, IHighlightActionMenuProviderAfterWith, 59: IHighlightActionMenuProviderAfterHighlightWhen, IHighlightActionMenuProviderAfterApplyHighlightStyle 60: { 61: private HtmlHelper _helper; 62:  63: private string _controllerName; 64: private string _actionName; 65: private string _text; 66: private object _routeData; 67: private object _htmlAttributes; 68:  69: private Func<HtmlHelper, bool> _highlightPredicate; 70:  71: private string _highlightText; 72: private object _highlightHtmlAttributes; 73:  74: public HighlightActionMenuProvider(HtmlHelper helper) 75: { 76: _helper = helper; 77: } 78:  79: public IHighlightActionMenuProviderAfterOn On(string actionName, string controllerName) 80: { 81: _actionName = actionName; 82: _controllerName = controllerName; 83: return this; 84: } 85:  86: public IHighlightActionMenuProviderAfterWith With(string text, object routeData, object htmlAttributes) 87: { 88: _text = text; 89: _routeData = routeData; 90: _htmlAttributes = htmlAttributes; 91: return this; 92: } 93:  94: public IHighlightActionMenuProviderAfterHighlightWhen HighlightWhen(Func<HtmlHelper, bool> predicate) 95: { 96: _highlightPredicate = predicate; 97: return this; 98: } 99:  100: public IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerMatch() 101: { 102: return HighlightWhen((helper) => 103: { 104: return helper.ViewContext.RouteData.Values["controller"].ToString().ToLower() == _controllerName.ToLower(); 105: }); 106: } 107:  108: public IHighlightActionMenuProviderAfterHighlightWhen HighlightWhenControllerAndActionMatch() 109: { 110: return HighlightWhen((helper) => 111: { 112: return helper.ViewContext.RouteData.Values["controller"].ToString().ToLower() == _controllerName.ToLower() && 113: helper.ViewContext.RouteData.Values["action"].ToString().ToLower() == _actionName.ToLower(); 114: }); 115: } 116:  117: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes, string highlightText) 118: { 119: _highlightText = highlightText; 120: _highlightHtmlAttributes = highlightHtmlAttributes; 121: return this; 122: } 123:  124: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(object highlightHtmlAttributes) 125: { 126: return ApplyHighlighStyle(highlightHtmlAttributes, _text); 127: } 128:  129: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass, string highlightText) 130: { 131: return ApplyHighlighStyle(new { @class = cssClass }, highlightText); 132: } 133:  134: public IHighlightActionMenuProviderAfterApplyHighlightStyle ApplyHighlighStyle(string cssClass) 135: { 136: return ApplyHighlighStyle(new { @class = cssClass }, _text); 137: } 138:  139: public MvcHtmlString ToActionLink() 140: { 141: if (_highlightPredicate.Invoke(_helper)) 142: { 143: // should be highlight 144: return _helper.ActionLink(_highlightText, _actionName, _controllerName, _routeData, _highlightHtmlAttributes); 145: } 146: else 147: { 148: // should not be highlight 149: return _helper.ActionLink(_text, _actionName, _controllerName, _routeData, _htmlAttributes); 150: } 151: } 152: } 153: } So in the master page when I need the highlight menu item I can “tell” the helper how it should be, just like this. 1: <li> 2: <% 1: : Html.HighlightActionMenu() 2: .On("Index", "Home") 3: .With(SiteMasterStrings.Home, null, null) 4: .HighlightWhenControllerMatch() 5: .ApplyHighlighStyle(new { style = "background:url(../../Content/Images/topmenu_bg.gif) repeat-x;text-decoration:none;color:#feffff;" }) 6: .ToActionLink() %> 3: </li> While I’m typing the code the IntelliSense will advise me that I need a highlight action menu, on the Index action of the Home controller, with the “Home” as its link text and no need the additional route data and Html attributes, and it should be highlighted when the controller was “Home”, and if it’s highlighted the style should be like this and finally render it to me. This is something we call “Fluently Language”. If you had been using Moq you will see that’s very development-friendly, document-ly and easy to read.   Summary In this post I demonstrated how to implement a highlight menu item in ASP.NET MVC by using its controller – action infrastructure. We can see the ASP.NET MVC helps us to organize our web application better. And then I also told a little bit more on the “Fluently Language” and showed how it will make our code better and easy to be used.   Hope this helps, Shaun   All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• FreeBSD high load loopback interface

  - by user1740915

  I have a problem with a FreeBSD server. There is a FreeBSD 9.0 amd64, two network cards em1 (internet), em0 (local network) configured firewall ipfw, natd, squid (not transparent), the server acts as a gateway for access to the Internet. Next problem: upload via squid is very low. At this moment I see next: natd, dhcpd load the cpu at that time when uploading through squid and there are a lot of traffic through the loopback interface. ipfw show output 0100 655389684 36707144666 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 00400 0 0 deny ip from any to ::1 00500 0 0 deny ip from ::1 to any 00600 4 292 allow ipv6-icmp from :: to ff02::/16 00700 0 0 allow ipv6-icmp from fe80::/10 to fe80::/10 00800 1 76 allow ipv6-icmp from fe80::/10 to ff02::/16 00900 0 0 allow ipv6-icmp from any to any ip6 icmp6types 1 01000 0 0 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136 01100 1615 76160 deny ip from 192.168.1.1 to any in via em1 01200 0 0 deny ip from 199.69.99.11 to any in via em0 01300 46652 3705426 deny ip from any to 172.16.0.0/12 via em1 01400 3936404 345618870 deny ip from any to 192.168.0.0/16 via em1 01500 4 336 deny ip from any to 0.0.0.0/8 via em1 01600 4129 387621 deny ip from any to 169.254.0.0/16 via em1 01700 0 0 deny ip from any to 192.0.2.0/24 via em1 01800 917566 33777571 deny ip from any to 224.0.0.0/4 via em1 01900 147872 22029252 deny ip from any to 240.0.0.0/4 via em1 02000 1132194739 1190981955947 divert 8668 ip4 from any to any via em1 02100 3 248 deny ip from 172.16.0.0/12 to any via em1 02200 35925 2281289 deny ip from 192.168.0.0/16 to any via em1 02300 1808 122494 deny ip from 0.0.0.0/8 to any via em1 02400 3 174 deny ip from 169.254.0.0/16 to any via em1 02500 0 0 deny ip from 192.0.2.0/24 to any via em1 02600 0 0 deny ip from 224.0.0.0/4 to any via em1 02700 0 0 deny ip from 240.0.0.0/4 to any via em1 02800 960156249 1095316736582 allow tcp from any to any established 02900 64236062 8243196577 allow ip from any to any frag 03000 34 1756 allow tcp from any to me dst-port 25 setup 03100 193 11580 allow tcp from any to me dst-port 53 setup 03200 63 4222 allow udp from any to me dst-port 53 03300 64 8350 allow udp from me 53 to any 03400 417 24140 allow tcp from any to me dst-port 80 setup 03500 211 10472 allow ip from any to me dst-port 3389 setup 05300 77 4488 allow ip from any to me dst-port 1723 setup 05400 3 156 allow ip from any to me dst-port 8443 setup 05500 9882 590596 allow tcp from any to me dst-port 22 setup 05600 1 60 allow ip from any to me dst-port 2000 setup 05700 0 0 allow ip from any to me dst-port 2201 setup 07400 4241779 216690096 deny log logamount 1000 ip4 from any to any in via em1 setup proto tcp 07500 21135656 1048824936 allow tcp from any to any setup 07600 474447 35298081 allow udp from me to any dst-port 53 keep-state 07700 532 40612 allow udp from me to any dst-port 123 keep-state 65535 1990638432 1122305322718 allow ip from any to any systat -ifstat when uploading via squid Load Average ||| Interface Traffic Peak Total tun0 in 79.507 KB/s 232.479 KB/s 42.314 GB out 2.022 MB/s 2.424 MB/s 59.662 GB lo0 in 4.450 MB/s 4.450 MB/s 43.723 GB out 4.450 MB/s 4.450 MB/s 43.723 GB em1 in 2.629 MB/s 2.982 MB/s 464.533 GB out 2.493 MB/s 2.875 MB/s 484.673 GB em0 in 240.458 KB/s 296.941 KB/s 442.368 GB out 512.508 KB/s 850.857 KB/s 416.122 GB top output PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 66885 root 1 92 0 26672K 2784K CPU3 3 528:43 65.48% natd 9160 dhcpd 1 45 0 31032K 9280K CPU1 1 7:40 32.96% dhcpd 66455 root 1 20 0 18344K 2856K select 1 119:27 1.37% openvpn 16043 squid 1 20 0 44404K 17884K kqread 2 0:22 0.29% squid squid.conf cat /usr/local/etc/squid/squid.conf # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 192.168.1.1:3128 # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/squid/cache 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/squid/cache I understand that the traffic passes through the SQUID several times. But can not find why.

  Read the article

• Oracle Service Cloud May 2014 Release – Focus on your driving by JP Saunders

  - by Tuula Fai

  The next time you’re twiddling dials on your car’s dashboard to get the air to blow in the right direction, and the right song to play on the stereo, while pulling on the wires to charge your phone and punching in passwords to re-sync your hands-free headset to take a call, consider this… Does having a better dashboard UI in your car improve your driving performance? The Tesla car has one of the most modern and intuitive dashboards in any commercial car today. It is actually based on the design of a smart phone, which can download apps and updates directly from the cloud.  The 17” touchscreen, Lynx-based dashboard totally integrates all channels and devices, allowing the driver to focus on the smooth driving and power of this luxury (toy) car.  What the folks at Tesla didn't do was avoid the complexity of our needs. Instead, they streamlined them. And, while we might not all be able to afford a Tesla, their approach demonstrates that a modern UI approach can ultimately make a positive difference in our lives and businesses.  This is why the productivity and effectiveness of a Modern Contact Center is many times greater than that of a traditional contact center. Agents in a Modern Contact Center get to focus on the task at hand, the customer engagement, rather than stumbling their way through Lego blocks of complexity.  The Oracle Service Cloud is a modern approach to customer service that empowers your agents to achieve greater focus on improving your operational and strategic success through streamlined business processes.  Here are some of the recent May 2014 release highlights to the Oracle Service Cloud: Performance Enhanced Desktop UI A modern agent desktop interface that optimizes clumsy tasks, logins, screens and workflows and is optimized for agent and system performance. Improvements include performance for drag-and-drop configurable views, saved searches, and improved caching for high-speed performance even during disconnected or slow internet access.  Customer Experience Routing A streamlined automatic way to connect the right customer need to the best agent skills, based on multidimensional variables such as product skills, language skills, workload, call volume to optimize the connection and resolution experience. On-The-Go Mobile Improvements to the Agent mobile app that extend connectivity to websites, and customer surveys that are mobile-ready and rendered for any device, and ensure the customer’s voice is captured while the insight is still top of mind.  Infused Social Engagement Enhancements to infused social capabilities allow agents to respond in social threads directly from within the agent desktop, with the information becoming part of the incident record for automatic actions (such as replay or escalate) triggered off the response. Front-End Siebel Contact Center The market leading online Web Customer Self-Service interface from the Oracle Service Cloud, is now out-of-the-box ready for Oracle Siebel customers. Deploy a new online web self-service interface in a matter of weeks to have customers self-serve and self-solve answers, with escalated incidents routed directly into the Oracle Siebel Contact Center. For more information on the latest enhancements for the Oracle Service Cloud, please see the Oracle Service Cloud May 2014 Capabilities and Benefits. Related blogs: Oracle Service Cloud Feb 2014

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >