Search Results

Search found 1130 results on 46 pages for 'networked gaming'.

Page 29/46 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Possible to use DRBD on two ESXi virtualized servers?

  - by chen

  I have two servers (attached disks have been set up as hardware RAID1 for disk device level failure resilience). Here is the setup in my mind: 1) Install ESXi on each of the physical server, M1, M2; 2) Start one VM on each of the ESXi virtualized physical server V1, V2; 3) Install the DRDB drivers within V1 and V2. Essentially, this is a "virtualizing machine running DRBD in the VM's instead of bare metal hardware" idea. My question is whether the above setup can achieve the same "networked RAID1" goal that DRDB can achieve in the bare-metal physical machines (http://www.drbd.org/). Thanks. [EDIT] I found this (http://serverfault.com/questions/49305/drbd-experimentation-and-virtualization) is a similar question, but the answer does not seem to be firmative enough for me to follow.

  Read the article

• hp laserjet 4200 madness

  - by C-dizzle

  I have an HP LaserJet 4200 printer that is acting really weird. I can print from internet just fine, no problem... but when I try to print from a document used in microsoft word, for example, I always get "Manual Feed Tray 1". I have racked my brain on this and cannot get it figured out. It's a networked printer and only an administrator account can make changes to it, I have also reset the printer back to factory settings, uninstalled and reinstalled onto the pc's and server it is connected to. Running out of hair since I'm pulling it all out... please help.

  Read the article

• Search Files (Preferably with index) on Windows 2000 Server

  - by ThinkBohemian

  I have many files on a windows server 2000 machine that is setup to act as a networked disk drive, is there anyway I can index the files and make that index available as a search to more people than just me? Bonus if the index can look inside of documents such as readme.txt? If there is no easy way to do this globaly (for all users) Is there a way I could generate and store an index locally on my computer? If this is the wrong place to ask this question, any advice on community more suited?

  Read the article

• Painless way of consolidating files across multiple machines/OSes

  - by 5arx

  Just bought a NAS. So I thought I'd get all our photos, media files and pdfs consolidated, de-duplicated, de-junked and virus-checked and stick them all on it. We have 3 laptops, one running Windows, the others OSX. We have a file server running Windows - it was the result of an earlier attempt at a networked fileserver - and a Mac Pro that is also kind of a server (previous attempts at this job have resulted in most of our stuff being on it). Also memory cards/sticks, cd backups and so on. I would be grateful if anyone could suggest a strategy or, ideally, tool(s) I could use to solve this problem. It is probably no more than one or two terabytes of data in total, but I can imagine that going through it all manually, file-by-file may well drive me insane.

  Read the article

• Network? or router? problem

  - by Robert H Mercer

  I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

  Read the article

• How do I prevent internet access to a group of computers on my network?

  - by Kevin Boyd

  Well I have the following setup... Computer A , B and C are networked.... Computer A is connected to the internet, computer B and C are not setup for internet access currently but I guess its possible with some kind of setting they would eventually be able to access the internet and this is what I would like to prevent. In summary only A should have internet access while A and B and C should still be on intranet. Is this kind of config possible?, what kind of software or setup or tools would I need to achive this?

  Read the article

• Can I create a virtual network interface to connect to a real network device?

  - by michelemarcon

  I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

  Read the article

• How to sync my PDA (outlook, no wifi) with my Google Calendar?

  - by Peter

  Hey Everybody, We have an old PDA that is not networked (Mio 168). It's main purpose is to serve as an agenda for which we use the outlook that came with it. Now, as my wife usually has the PDA and I want to be able to check and update our agenda too, I'm looking for a way to sync it with Google Calendar by hooking it to my PC via USB. I found a tool to sync outlook with Google Calendar. However, I would need outlook on my PC to be able to use that and I don't have outlook on my PC, nor do I want to buy it just for this sync. So, does anybody here now if and how I can sync my outlook on my PDA with Google Calendar without the go between of a PC version of outlook? Cheers.

  Read the article

• Network router and switch configuration

  - by gilly3

  Can I put a switch before my router in my home network? Here is a diagram of how I want to set up my network: ________________________________ ________________________________________ | | | | | Cable Access Panel | | Home Office | | _____________ ________ | | _____________ | | | | | | | | | | _________ | | | Cable Modem |--->| Switch |-------------->| Router |____| | | | |_____________| |________| | | |_____________| | Printer | | |______________________/____\____| | / | \ |_________| | ___/_ _\___ | _____/ ____|____ \_____ | | | | | | | | | | | | | | PC1 | | PC2 | | | PC3 | | Ext. HD | | PC4 | | |_____| |_____| | |_____| |_________| |_____| | |________________________________________| The reason I want to do this is because my router is also my wireless access point. My cable modem is located in the far corner of my home where my phone/tv/network access panel is. I'd rather keep the wireless access point in a more central location, but I'm not sure if DHCP will continue to work properly with that configuration. Edit: I'd like to continue to be able to share files and access my networked drive and printer from each computer in the house.

  Read the article

• TextPad printing to incorrect printer

  - by TecBrat

  I have tried to find an answer on Google, and searched SU, but have not found anything on this particular issue. I Looked for a setting in the TextPad menu and didn't see anything that seemed relevant. I have 2 networked printers that are the same model. (HP LaserJet 2200 Series PCL 5) One is near me and the other is across the building. The one near me is my default. It seems that TextPad remembers the last printer used and defaults to it rather than printing to the system default, so when I force it to print to my default printer once, the problem is solved until I decide to print to the other printer for some reason. If I don't remember the problem, and specifically print a job to the nearby printer to correct it, I'll end up either wasting paper or wasting trips across the building to pick up printjobs that got printed there by accident. Has anyone else noticed this problem? Is there a solution?

  Read the article

• Is there a way to force/manage file locking in windows?

  - by JPbuntu

  I have a 2 Windows machines networked and I am having trouble with simultaneous access to files. I would like only one user to be able to open a file at a time, which I thought was automatic, using file locks.... if the program used to access the file is locking the file. I believe the problem I am having is some of the programs I use, don't lock the file, and there for can be modified simultaneously by multiple users, which is very much not desired. Currently I am having this problem with only two computers, although as soon as I can figure out a solution to this problem the network is going to be expanded to 6 computers, which will include Windows 7, Vista, and XP, as well as a central file server (Samba). Is there a way to ensure that all files opened in windows get locked? Any suggestions are appreciated, thanks.

  Read the article

• Virtualized Development Server for simulating 3-Tier Environment

  - by chris.cyvas

  Hello, I am thinking about buying a new server based development box for development (redundantly redundant, I know ;)). Ideally, I want to run something like ESXi or Xen Hypervisor at the lowest level. Then I want to add (at least) 5 Linux VM's for the following uses: 2 Web Servers 2 Application Servers 1 Database Server I want to load balance the 2 web servers and the 2 application servers and (somewhat obviously) they need to be all networked together to simulate a production environment. Also, it used to be the case that the recommendation was to put each VM on it's own hard drive, but I'm not sure that holds water anymore. Any advice? Does anyone have any advice on how to pull this off? Gotchya's, LookOuts!, etc? Thanks!

  Read the article

• building a home server with a nas appliance [closed]

  - by user51666

  Possible Duplicate: Best way to build home NAS with redundancy I was hoping to get some ideas from folks here. I'm interested in building a home web server with a nas appliance. It would be primarily used for storing pictures, video. I want a networked storage device so I can have multiple devices access it wirelessly as needed from within our home and also I want the option to access from outside the house using a login/pw access. I'm also interested in customizing, building my own web pages as well. Preferably apache. Any preferences? Does anyone have an interesting, neat set up they can share? Thanks!

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router. All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled. Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this? How do I fix it?

  Read the article

• Proxy Server suggestions

  - by Jon Menefee

  Here is the question I have that hopefully is not too general of a question. I have a network with approximately 25 PC's, 3 servers and 25 IP cameras. I have a firewall already on the network and it works fine for what I need, but my client is asking me if there is a way to put a Proxy server on the network to monitor where his employees are going when they surf the Internet. He is not wanting to block them (at least not thru the Proxy server), but he wants to make sure that they arent going to sites that would compromise the networked PCs. I have looked at TMG and it is a little more than what I want. I hesitate adding another firewall to the system because of the security cameras that are presently on the network (IP Cameras). I just want to put a policy in AD that would make certain Users (or Computers) use a Proxy server. Any suggestions on a good proxy server are welcome. Thank you

  Read the article

• I&rsquo;m sorry RPGs, it&rsquo;s not you, it&rsquo;s me: The birth of my game idea

  - by George Clingerman

  One of the things I’ve had to give up in order to have some development time at night is gaming. It’s something I refused to admit for years but I’ve just had to face the facts. I’m no longer a gamer. I just don’t have hours and hours of free time to pour into gaming and when I do have hours and hours of free time I want to pour them into game development. That doesn’t mean I don’t game at all! I play games pretty much every day. It just means I’ve moved more into the casual game realm. It’s all I have time for when juggling priorities in my life. That means that games like Gears of War 2 sit shrink wrapped on my shelf and although I popped Dragon Age into my Xbox 360 one time, I barely made it through the opening sequence and haven’t had time to sit down and play again. Instead I’m playing short games like Jamestown, Atom Zombie Smasher, Fortix or if I have time to jump in and play a few rounds maybe some Monday Night Combat or Team Fortress 2. These are games I can instantly get into and play for just a short period of time and then walk away. Breath of Death VII saved my life: Back in the day (way, way back in the day) I used to be a pretty big RPG fan. Not big by a lot of RPG gamers' standards (most of the RPGs RPG fans about I’ve never heard of) but I used to LOVE to play them on the NES, SNES and Genesis and considered that my genre. Final Fantasy, Shining in the Darkness, Bard’s Tale, Faxanadu, Shadowrun, Ultima, Dragon Warrior, Chrono Trigger, Phantasy Star, Shining Force and well the list could go on but those are the ones I remember off the top of my head. I loved playing RPGs and they were my games of choice. After my first son was born (this was just about 12 years ago), I tried to continue playing RPGs and purchased games like Baldur’s Gate I & II, Neverwinter Nights, Fable, then a few of the Final Fantasy’s then Kingdom Hearts. I kept buying these games and then only playing for about fifteen minutes and never getting back to them. I still loved RPGs but they just no longer fit into my life (I still haven’t accepted that since I still purchased Dragon Age II for some reason and convinced myself I’d find the time). Adding three more sons to the mix (that’s 4 total) didn’t help much to finding more RPG time (except for Breath of Death VII and other XBLIG RPG titles, thanks guys!) All work and no RPG: A few months ago as I was sitting thinking about the lack of RPGs in my life and talking to my wife about why I wish RPGs were different and easier for a dad like me to get into. She seemed like she was listening, so I started listing all the things that made them impossible for me to play. Here’s a short list I came up with. They take 15 billion hours to complete I have a few minutes at a time I can grab to play them if I want to have time to code. At that rate it would take me 9 trillion years to beat just one RPG. There’s such long spans of times between when I can play them I forget what I was even doing so I have to spend most of the playtime I have just figuring that out and then my play time is over. Repeat. I’ll never finish one and since it takes so long to get to the fun part in an RPG, I’m never having fun. RPGs aren’t fun if you don’t have hours to play them at a time. As you can see based on my science and math, RPGs aren’t fun for me any more. From there my brain started toying around with ideas of RPGs that would work for me. They would have to be a short RPG, you know one you could beat in a single play session. A dad sized play session. I started thinking, wouldn’t it be awesome if there was a fifteen minute RPG? That got me laughing and I took that as a good sign that it sounded fun and so I thought about it a little more. I immediately discarded the idea of doing a real RPG. I’m sure a short RPG like that could be done but it wasn’t the vibe that I had in my head. No this was going to be something that just had the core essence of an RPG. In reality what I’d be making would be more of an arcade style game. One with high scores and lots of crazy action on the screen. And that’s when it hit me. It would be a speed run RPG. That’s the basics of the game I’m working on.   The Elevator Pitch: It’s a 2D top down RPG themed arcade game focused on speed. It sounds like an RPG, smells like an RPG but it’s merely emulating an RPG. The game is focused on fun and mayhem in RPG form with players leveling up in seconds instead of hours and rushing to finish quests as quickly as possible because they’ve only got fifteen minutes before EVIL overtakes the world. If the player takes longer than fifteen minutes, it’s game over man. One to four player co-operative play to really see just how fast players can level up and beat the game. Gamers will compete on leaderboards for bragging rights for fastest 1, 2, 3, and 4 player speed runs, lowest leveled characters to beat the game, highest leveled characters to beat the game and so on. Times will be tracked for everything from how long a player sat distributing stats, equipping items, talking to NPCs to running around the level. These stats will be shown at the end of each quest/level so the players can work on improving their speed run for that part of the game next time around. It’s the perfect RPG for those of us who only have fifteen minutes of game time! Where I’m at: I’m still at the prototyping stage attempting to but all the basic framework pieces in place that will at minimum give me one level to rush through. I’ve been working on this prototype for about a month now though so I’m going to have to step it up a bit or I’m not going to get finished in time (remember I’ve only got 85 days left!) Lots of the game code is in place (although pretty sloppy) but I still can’t play through that first quest/level just yet. That’s my goal to finish up by the end of next Sunday (3/25/2012). You can all hold me to that and cheer me on or heckle me throughout the week. Either way that should help me stay a bit more motivated and focused. In my head this feels like it’s going to be a fun game so I’m looking forward to seeing how it actually plays!

  Read the article

• Stream Media and Live TV Across the Internet with Orb

  - by DigitalGeekery

  Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next.   Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next  to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV.   If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip.   You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Next choose an analog provider, if necessary, and click Next.   Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next.   Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right…   …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly.   Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again.   Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking.   Playback will begin in the default media player for the streaming format.   Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format.   Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications  and select Control Panel. You can also click Settings at the top right.   Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS.   Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished.    Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile.  By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device.   Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App.  Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and  password and click OK.   From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon.   Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

  Read the article

• The Making of Arduino [Geek History]

  - by Jason Fitzpatrick

  The open-source Arduino board is the heart of thousands of different DIY projects–it would be easy to think that the Arduino has always been around. The ubiquitous little hobby board, however, is but a scant six years old. At technology blog IEEESpectrum they delve into the history of the Arduino board and its quiet origins in a small Italian town. Here’s an excerpt from their lengthy write up about the the origin and history of the beloved Arduino: Arduino is a low-cost microcontroller board that lets even a novice do really amazing things. You can connect an Arduino to all kinds of sensors, lights, motors, and other devices and use easy-to-learn software to program how your creation will behave. You can build an interactive display or a mobile robot and then share your design with the world by posting it on the Net. Released in 2005 as a modest tool for Banzi’s students at the Interaction Design Institute Ivrea (IDII), Arduino has spawned an international do-it-yourself revolution in electronics. You can buy an Arduino board for just about US $30 or build your own from scratch: All hardware schematics and source code are available for free under public licenses. As a result, Arduino has become the most influential open-source hardware movement of its time. The little board is now the go-to gear for artists, hobbyists, students, and anyone with a gadgetry dream. More than 250 000 Arduino boards have been sold around the world—and that doesn’t include the reams of clones. “It made it possible for people do things they wouldn’t have done otherwise,” says David A. Mellis, who was a student at IDII before pursuing graduate work at the MIT Media Lab and is the lead software developer of Arduino. HTG Explains: Understanding Routers, Switches, and Network Hardware How to Use Offline Files in Windows to Cache Your Networked Files Offline How to See What Web Sites Your Computer is Secretly Connecting To

  Read the article

• Static background noise while using new headset Ubuntu 13.04

  - by ThundLayr

  Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

  Read the article

• Data and Secularism

  - by kaleidoscope

  Ever since we’ve been using Data we’ve been religious. Religious about the way we represent it and equally religious about the way we access it. Be it plain old SQL, DAO, ADO, ADO.Net and I am just referring to religions in MSFT world. A peek outside and I’d need a separate book to list out the Data faiths. Various application areas in networked computing are converging under the HTTP umbrella with a plausible transition to purist HTTP and in turn REST fuelled by the Web2.0 storm. It was time the Data access faiths also gave up the religious silos wrapped around our long worshipped data publishing and access methods. OData is the secular solution we have at hand today. It is an open protocol for sharing data. It can be exposed via REST. It is Open as in the Microsoft Open Specification Promise. This allows virtually everyone to build Data Services for any runtime. OData is one of the key standards for Data publishing/subscribing on Microsoft Codename Dallas. For us .Netters OData data sources can be exposed/consumed via WCF Data Services and the process is very simple, elegant and intuitive. Applications exposing OData Services Sharepoint 2010 IBM Web Sphere Microsoft SQL Azure Windows Azure Table Storage SQL Server Reporting Services   Live OData Services Netflix Open Science Data Initiative Open Government Data Initiatives Northwind database exposed as OData Service and many others Some may prefer to call it commoditization of data, unification of data access strategies or any other sweet name. I for one will stick to my secular definition. :) Technorati Tags: Sarang,OData,MOSP

  Read the article

• Unleash AutoVue on Your Unmanaged Data

  - by [email protected]

  Over the years, I've spoken to hundreds of customers who use AutoVue to collaborate on their "managed" data stored in content management systems, product lifecycle management systems, etc. via our many integrations. Through these conversations I've also learned a harsh reality - we will never fully move away from unmanaged data (desktops, file servers, emails, etc). If you use AutoVue today you already know that even if your primary use is viewing content stored in a content management system, you can still open files stored locally on your computer. But did you know that AutoVue actually has - built-in - a great solution for viewing, printing and redlining your data stored on file servers? Using the 'Server protocol' you can point AutoVue directly to a top-level location on any networked file server and provide your users with a link or shortcut to access an interface similar to the sample page shown below. Many customers link to pages just like this one from their internal company intranets. Through this webpage, users can easily search and browse through file server data with a 'click-and-view' interface to find the specific image, document, drawing or model they're looking for. Any markups created on a document will be accessible to everyone else viewing that document and of course real-time collaboration is supported as well. Customers on maintenance can consult the AutoVue Admin guide or My Oracle Support Doc ID 753018.1 for an introduction to the server protocol. Contact your local AutoVue Solutions Consultant for help setting up the sample shown above.

  Read the article

• Oracle VM VirtualBox 4.0 Now Available

  - by Paulo Folgado

  Delivering on Oracle's commitment to open source, Oracle VM VirtualBox 4.0 is now available, further enhancing the popular, open source, cross-platform virtualization software.   "Oracle VM VirtualBox 4.0 is the third major product release in just over a year, and adds to the many new product releases across the Oracle Virtualization product line, illustrating the investment and importance that Oracle places on providing a comprehensive desktop to datacenter virtualization solution," says Wim Coekaerts, senior vice president, Linux and Virtualization Engineering, Oracle. "With an improved user interface and added virtual hardware support, customers will find Oracle VM VirtualBox 4.0 provides a richer user experience." Part of Oracle's comprehensive portfolio of virtualization solutions, Oracle VM VirtualBox enables desktop or laptop computers to run multiple guest operating systems simultaneously, allowing users to get the most flexibility and utilization out of their PCs, and supports a variety of host operating systems, including Windows, Mac OS X, most popular flavors of Linux (including Oracle Linux), and Oracle Solaris. Oracle VM VirtualBox 4.0 delivers increased capacity and throughput to handle greater workloads, enhanced virtual appliance capabilities, and significant usability improvements. Support for the latest in virtual hardware, including chipsets supporting PCI Express, further extends the value delivered to customers, partners, and developers. Highlights of Oracle VM VirtualBox 4.0 include New Open Architecture - Oracle and community developers can now create extensions that customize Oracle VM VirtualBox and add features not previously available.Enhanced Usability - A new scalable display mode enables users to view more virtual displays on their existing monitors. Improvements to VM management, including visual VM previews, an optional attributes display, and easy launch shortcut creation enables administrators and power users to customize the interface to make it as simple or as comprehensive as required.Increased Capacity and Throughput - A new asynchronous I/O model for networked (iSCSI) and local storage delivers significant storage related performance improvements, while new optimizations allow larger datacenter-class workloads, such as Oracle's middeware, to be run on 32-bit Windows hosts for testing and demo purposes. Powerful Virtual Appliance Sharing Capabilities - Enhanced support for standards-compliant OVF appliances and added support for OVA format descriptors. All information about a VM may be stored in a single folder to facilitate easier direct sharing among VMs. Support for Latest Virtual Hardware - A new, modern virtual chipset supporting PCI Express and other hardware enhancements including high-definition audio devices helps ensure support for the most demanding virtual workloads.

  Read the article

• Google Rolls Out a New and Compact Navigation Bar

  - by Jason Fitzpatrick

  Earlier this spring Google introduced the black navigation bar; now they’ve updated the bar to take up less space and be more useful. Although the black bar is useful in-so-far as it gives you quick access to Google services (useful, of course, only if you use those services) the new navigation bar–seen in the video above–includes an improved layout. Rather than use the bar space to spread out links which the user may or may not use the service links are now tucked into a mouse-over menu accessed by hovering on the Google logo. The majority of the space previously just taken up by links and the black bar itself is now a a search box. If you don’t already see the new interface, look for it to appear in your Google account within the next few days. Hit up the link below to read the official announcement. The Next Stage In Our Redesign [The Official Google Blog] HTG Explains: Understanding Routers, Switches, and Network Hardware How to Use Offline Files in Windows to Cache Your Networked Files Offline How to See What Web Sites Your Computer is Secretly Connecting To

  Read the article

• Designing a Content-Based ETL Process with .NET and SFDC

  - by Patrick

  As my firm makes the transition to using SFDC as our main operational system, we've spun together a couple of SFDC portals where we can post customer-specific documents to be viewed at will. As such, we've had the need for pseudo-ETL applications to be implemented that are able to extract metadata from the documents our analysts generate internally (most are industry-standard PDFs, XML, or MS Office formats) and place in networked "queue" folders. From there, our applications scoop of the queued documents and upload them to the appropriate SFDC CRM Content Library along with some select pieces of metadata. I've mostly used DbAmp to broker communication with SFDC (DbAmp is a Linked Server provider that allows you to use SQL conventions to interact with your SFDC Org data). I've been able to create [console] applications in C# that work pretty well, and they're usually structured something like this: static void Main() { // Load parameters from app.config. // Get documents from queue. var files = someInterface.GetFiles(someFilterOrRegexPattern); foreach (var file in files) { // Extract metadata from the file. // Validate some attributes of the file; add any validation errors to an in-memory // structure (e.g. List<ValidationErrors>). if (isValid) { var fileData = File.ReadAllBytes(file); // Upload using some wrapper for an ORM or DAL someInterface.Upload(fileData, meta.Param1, meta.Param2, ...); } else { // Bounce the file } } // Report any validation errors (via message bus or SMTP or some such). } And that's pretty much it. Most of the time I wrap all these operations in a "Worker" class that takes the needed interfaces as constructor parameters. This approach has worked reasonably well, but I just get this feeling in my gut that there's something awful about it and would love some feedback. Is writing an ETL process as a C# Console app a bad idea? I'm also wondering if there are some design patterns that would be useful in this scenario that I'm clearly overlooking. Thanks in advance!

  Read the article

• Canon Pixma 432 network scanner

  - by Donald Cutler

  I have a problem with a Canon Pixma MX432 Printer/Scanner. I just removed Windows 7 and installed Ubuntu 14.04 8/17/2014 on an older desktop that I built (The computer is an AMD build with an ASUS motherboard). The printer/scanner is an all-in-one unit that is networked in my house via WiFi. All of the computers in my house can access this printer/scanner. My Macbook, my wife's Windows 8 laptop, and my kids mini iPads. I am giving Linux a test-drive with some success as far as setting devices up. But, for the life of me I cannot figure out my scanner issue. If anyone can help I would appreciate it. Make/Model: Canon Pixma MX432 PPD Driver: I have no idea how to get this info. Supported?: no, from the information I gather from old forum posts. Works?: the printer works via WiFi perfectly, but not the scanner. The Simple Scan program sees the scanner, but produces an error when I attempt to scan. I also tried XSANE, but that program does not even detect the scanner. NOTE: THE PRINTER IS WORKING OFF OF AN UBUNTU DRIVER AND NOT A CANON DRIVER. Linux Version: Ubuntu 14.04 I tried the steps in this post, downloaded the "scangearmp-mx430series-1.90-1-deb.tar.gz" file, but could not get the scanner to work. http://ubuntuforums.org/archive/index.php/t-2096430.html any suggestions?

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >