Search Results

Search found 1525 results on 61 pages for 'pair'.

Page 29/61 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Force Windows to output only mono sound

  - by J. Polfer

  So, the 'right' half of my pair of headphones broke (the transducer+wire are fine, but the earpiece broke on the headband and so the earpiece won't sit over my ear). So now the right channel is being broadcast to my cube neighbors when I wear my headphones. Yes, they look very silly. Is there a way to ensure, in Windows XP (or Windows Media Player), that all stereo sound is downmixed to the left channel only (ie, in mono) so my neighbors don't hear my music? I know that I can setup the mixer to set the balance to 100% left, but information in the right channel won't be heard.

  Read the article

• Passing multiple sets of arguments to a command

  - by Alec

  instances contains several whitespace separated strings, as does snapshots. I want to run the command below, with each instance-snapshot pair. ec2-attach-volume --instance $instances --device /dev/sdf $snapshots For example, if instances contains A B C, and snapshots contains 1 2 3, I want the command to be called like so: ec2-attach-volume -C cert.pem -K pk.pem --instance A --device /dev/sdf 1 ec2-attach-volume -C cert.pem -K pk.pem --instance B --device /dev/sdf 2 ec2-attach-volume -C cert.pem -K pk.pem --instance C --device /dev/sdf 3 I can do either one or the other with xargs -n 1, but how do I do both?

  Read the article

• Lenovo ThinkServer TS130 1105 - does 32/64 depend on RAM?

  - by Ecnerwal

  Just got in a Lenovo ThinkServer TS130 1105 (Xeon E3-1225V1) and a (new, sealed, holographed, looks legit) copy of Windows Server 2008 32/64 (standard) to run on it for a pretty lightweight job (currently handled, adequately, by a terrifyingly old Optima P4 running Windows 2000 server - really lightweight, but long-past-due for replacement, without any particular need or excuse for server 2012...) The 64 bit disc sits there and does nothing. The 32 bit disc boots. I haven't spotted any mention of this in the TS130 Manual (I have now combed it, and find no mention of a need to populate in pairs - a preferred order to populate in, yes, but no mention of pairs being required) but I begin to wonder if it's due to the fact that the 4GB RAM suppled with it was a single DIMM, rather than a pair. Better for upgrading, but perhaps requiring an upgrade (or sidegrade) right away to install the x64 version?? Anyone know? I tried the 64-bit DVD on a desktop with an AMD Athlon II X4 635 processor which normally runs Windows7 in 64 bit, and it booted up just fine.

  Read the article

• nginx: override global ssl directives for specific servers

  - by alkar

  In my configuration I have placed the ssl_* directives inside the http block and have been using a wildcard certificate certified by a custom CA without any problems. However, I now want to use a new certificate for a new subdomain (a server), that has been certified by a recognized CA. Let's say the TLD is blah.org. I want my custom certificate with CN *.blah.org to be used on all domains except for new.blah.org that will use its own certificate/key pair of files with CN new.blah.org. How would one do that? Adding new ssl_* directives inside the server block doesn't seem to override the global settings.

  Read the article

• Interested in scp recipe for sftp [closed]

  - by GJZ

  You wrote in a reply this Blockquote The problem is that sftp runs as the user's id -- first, the sftp client ssh's into the target host as the given user, then runs sftp-server. Since sftp-server is running as a regular user, it has no way to "give away" a file (change owner of a file). However, if you are able to use scp, and assign a key pair to each user, you can get around this. This involves adding a user's key to root's ~/.ssh/authorized_keys file, with a "command=" parameter to force it to run a script that sanitizes and alters the arguments of the server-side scp program. I've used this technique before to set up an anonymous scp dropbox that allowed anyone to submit a file, and ensure that no one could retrieve submitted files and also prevent overwrites. If you are open to this technique, let me know and I'll update this post with a quick recipe. We are interested in this scp quick recipe for our community services file sharing. Best Regards, Gert Jan Zeilstra

  Read the article

• Desktop speakers with headphone port and separate volume controls

  - by Kevin L.

  I currently use the excellent Logitech X-230 desktop speaker/subwoofer set, which I love for the volume dial on the front which gives me a nice, quick, tactile control of my sound without requiring a remote or keyboard buttons or some awkward software slider. Additionally, there's a very convenient headphone jack right next to the volume dial but the volume dial only controls the speakers, leaving the headphones at full volume. The goal is to be able to adjust the sound in my headphones without having to fumble around and find an inline headphone volume control (and my current favorite pair doesn't even have one). Is anyone aware of a desktop speaker set that has convenient volume controls for both levels?

  Read the article

• Outlook + Exchange 2007: it is possible to rid of local OST files?

  - by kdl

  I am looking for a solution which would allow to use a convenience of Outlook as a mail client app while at the same time have no PST or OST files on a local computer. Even in 'non-caching' mode Outlook creates an OST file where it downloads everything from the Exchange server. OWA does not create any local files (except cookies I believe) but lacks some of the nice features Outlook has. Would it be feasible to place OST files on a network share? Maybe the solution exists for some other client+server pair?

  Read the article

• Root access amazon ec2

  - by mazzzzz

  Hey guys, I am very new to linux, and amazon-ec2. I wanted to put a quick server. For some reason, when I sign in with my key pair, it prompts me for a username, I input ec2-user, and I'm in. The problem is that I don't have root access (and can't find the root password). I need to install screen to run the server in the background, and also create a new user, that doesn't have root, to run the server. Neither of which I can do without root.. Any help? Edit: I am using Basic 32-bit Amazon Linux AMI 2010.11.1 Beta as the 'AMI'. Thanks, Max

  Read the article

• Advice for outdoor wifi hardware and topology

  - by Robot

  I haven't setup any wifi networks other than an access point or two at any single location, so I'd like advice on how to setup an outdoor/weatherproof network in an area approximately 150 feet by 200 feet. The interesting thing is there are a pair of pools in the middle of the coverage area. Here is a picture: blue is pool, green is coverage area, yellow is building with wired access. Can anyone advise me on weatherproof APs, antennas and placement for best coverage of the pool deck? I've looked at the Meraki stuff, but I'm thinking it's overkill.

  Read the article

• How should my CAT6e cable be terminated? No pairs?

  - by user231465

  I have just bought 60 meters of CAT6e cables, sold as "4 pair UTP RJ45". I have looked at various videos on Youtube but I cannot determine the correct wiring. all the colors of the cable I saw there are different from mine. Mine is untwisted, and it is not color coded. I have 8 pin connectors all of a single color. How should I wire this cable? EDIT THE PACKAGE DOES SAY TWISTED but they are not (twisted).

  Read the article

• Java login through LDAP

  - by Salda

  I am starting to write an application for our office and the first step is authentication through LDAP where all users already exist. Everything I need is a code in Java to check if the pair <nick,password> is right. Google found me many links, but I think that I will find here the most sofisticate, short and up to date solution (I don't want to read all articles like 2 whole days to do something so simple). I have written many dkBs of code in C++, but in Java I am total noob and I haven't coded anything with LDAP yet so try to be simple if speaking in Java and LDAP terms if possible.

  Read the article

• Copying Data from another Excel Workbook based on a matching id

  - by Kyle Begeman

  I have 2 workbooks I am working with. One workbook has an id and a category name. The other workbook shows a name and category section that has an id number (but not the actual description). Basically I want to copy the full category text to my current workbook from the old one based on the id number into a new column What kind of formula can I use to check the id number category pair and then copy it into the new workbook in a new column? Any help is great!

  Read the article

• Moving software RAID to Linux

  - by terman

  I'm using a RAID 1 (mirrored pair) configuration in my Media Center/ NAS system. Currently it's running Windows 8 (yeah, big mistake I know) and I'm regretting it (did it for the games, not worth it). Currently I'm having two software RAID 1s (3TB + 2TB) configured with Storage Spaces and unfortunately formatted with NTFS. Now I would like to switch to Fedora (or maybe Ubuntu if there are advantages) for good. Is there a way that I could continue using the disks as they are without the need to format them with ext or something? I'm glad for every tip. Oh, the system disk is of cause not in a raid configuration.

  Read the article

• How to change the setting for a network device reported by ethtool, specifically Speed, on VM?

  - by Ramadheer Singh

  This is related to these two questions, although they don't answer my question. The machines are RHEL6. 1.ethtool not showing all the properties 2.changing network speed to 1000Mb/s Output on VM: [root@foo ~]# ethtool eth0 Settings for eth0: Current message level: 0x00000007 (7) Link detected: yes Output on Real Hardware: (interested in Speed) # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes ***Speed: 1000Mb/s*** Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: d Wake-on: d Link detected: yes if there's anyway I can set this in VM, please suggest.

  Read the article

• Memory works fine separately, but not together

  - by patersonjs

  I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

  Read the article

• Replacing a non-failing drive in a RAID-0 array

  - by TallFurryMan

  I have a Windows 7 machine booting on a RAID-0 pair of 500GB disks, controlled by an ICH9R. One of those was indicating an end-To-end SMART failure, so I added a spare disk as a temporary workaround, before receiving another to replace the failing one. The RAID-0 rebuilt on the spare and dropped the failing one from the array, as expected. Now that I received the new drive, what are my options to reintegrate it in the array? My first thought was to simply clone the temporary disk to the new one while the array is offline, but shouldn't there be a way to force a second rebuild, just as if the temporary drive had a warning, and drop that temporary from the array?

  Read the article

• Internal Server Error: the server encountered an internal error or misconfiguration!

  - by user43055

  Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. This has something to do with any htcaccess file or something? This page works perfectly in my localhost, but when I upload it here: http://globalcolleague.com/test/ it throws the error.

  Read the article

• Nested/multiple brace-matching in Notepad++

  - by Melodic

  In Notepad++, is it possible to force all (or at least the 3 or 4 deepest) pairs of braces/brackets/parens/etc. that enclose the cursor to become highlighted? Preferably in different colors for each matched pair? For instance, in this example: int main(char** args) { if(blah) { ... } } If we place the cursor anywhere in the if-block, the main function's opening and closing braces should become one color, while the if-block's braces become another. The coloring for each block should stay the same as long the cursor is still in that block.

  Read the article

• Is it possible to put an 8000 series socket-F Opteron into a dual-socket motherboard?

  - by René Kåbis

  Exactly what it says on the Tin. I have a dual-socket, socket-F motherboard in which I am looking to put two high-end quad-core Opterons, but the 2000 series are nearly double the price of the 8000 series on eBay. Can I just drop in a pair of 8000 series processors and be done with it, or are there processor-critical motherboard features that would be present on a quad(+)-socket motherboard that don’t exist on a dual-socket motherboard? Please elaborate or link to resources that can explain this further, as I am not adverse to research (and I am interested in the technical issues involved) I am probably using the wrong search terms, as Google failed to return anything within the first few dozen results.

  Read the article

• Howto setup a `veth` virtual network

  - by Reinder

  I'd like to setup three virtual network interfaces (veth) which can communicate with each other. To simulate a three node cluster, each program then binds to one veth interface. I'd like to do it without LXC if possible. I tried using: Created three veth pairs: sudo ip link add type veth Created a bridge sudo brctl addbr br0 Added one of each pair to the bridge: sudo brctl addif br0 veth1 sudo brctl addif br0 veth3 sudo brctl addif br0 veth5 Configured the interfaces: sudo ifconfig veth0 10.0.0.201 netmask 255.255.255.0 up sudo ifconfig veth2 10.0.0.202 netmask 255.255.255.0 up sudo ifconfig veth4 10.0.0.203 netmask 255.255.255.0 up Then I verified if is works using: ping -I veth0 10.0.0.202 but it doesn't :( The I added IP addresses to the veth1,veth3,veth5 and br0 interfaces in the 10.0.1.x/24 range. But that doesn't help. Any ideas? or a guide, all I find in how to use it with LXC. Or am I trying something that isn't possible?

  Read the article

• Git SSH RSA keys

  - by Michael

  I thought I set up my key pairs correctly -- I can do git pulls. I can do git commits. But when I do a git push, it counts objects, decompresses, then says: fatal: the remote end hung up unexpectedly. What's the issue here? I'm a super user, so it's not folder writable / readable access problems -- it must be the way I set up the encryption key pair... how do I debug this ... since git pull works?

  Read the article

• Replacing a non-failing drive in a RAID-0 array [migrated]

  - by TallFurryMan

  I have a Windows 7 machine booting on a RAID-0 pair of 500GB disks, controlled by an ICH9R. One of those is indicating an end-To-end SMART failure. I added a spare disk as a temporary workaround, before receiving another to replace the failing one (prices are awful these days). The RAID-0 rebuilt on the spare and dropped the failing one from the array, as expected. Now that I received the new drive, what are my options to reintegrate it in the array? My first thought was to simply clone the temporary disk to the new one while the array is offline, but shouldn't there be a way to force a second rebuild, just as if the temporary drive had a warning, and drop that temporary from the array?

  Read the article

• My stereo headphones cable is broken, what can I do?

  - by ucas

  I have a pair of stereo headphones, I got them on Amazon. Now, the right headphone stops producing sound. To fix that I need to move/shake the tip of the cable (the one before that part of tip which goes inside the headphone jack on the laptop). But as time goes, this sort of fix helps less and less. It looks that the cable is a bit broken at the place where I shake/move cable. Is that the end of use of my headphones? Is that a reject of the device? Is there a way to fix it, for example, changing the very tip of the cable at the very end of it. Any advice on buying headphones?

  Read the article

• RAID striping on a desktop machine

  - by Blazemore

  I currently have a 120Gib SSD which is pretty fast for things like game loading times and video editing. However, I was wondering about getting another identical drive and hooking it up with a striping RAID array in hardware (I boot multiple operating systems). This would have the dual benefits of providing a larger logical drive, while also providing greater performance. However, I have a few questions: What kind of performance increase can I expect to see with a pair of good quality SSDs? How expensive is a quality desktop RAID controller? Will the controller present the OS with a single logical drive? Does this mean I can still partition it and multi-boot? Basically, can I treat the RAID controller as "a hard drive" at the OS level?

  Read the article

• Bluetooth RFCOMM / SDP connection to a RS232 adapter in android

  - by ThePosey

  Hello All, I am trying to use the Bluetooth Chat sample API app that google provides to connect to a bluetooth RS232 adapter hooked up to another device. Here is the app for reference: http://developer.android.com/resources/samples/BluetoothChat/index.html And here is the spec sheet for the RS232 connector just for reference: http://serialio.com/download/Docs/BlueSnap-guide-4.77_Commands.pdf Well the problem is that when I go to connect to the device with: mmSocket.connect(); (BluetoothSocket::connect()) I always get an IOException error thrown by the connect() method. When I do a toString on the exception I get "Service discovery failed". My question is mostly what are the cases that would cause an IOException to get thrown in the connect method? I know those are in the source somewhere but I don't know exactly how the java layer that you write apps in and the C/C++ layer that contains the actual stacks interface. I know that it uses the bluez bluetooth stack which is written in C/C++ but not sure how that ties into the java layer which is what I would think is throwing the exception. Any help on pointing me to where I can try to dissect this issue would be incredible. Also just to note I am able to pair with the RS232 adapter just fine but I am never able to actually connect. Here is the logcat output for more reference: I/ActivityManager( 1018): Displayed activity com.example.android.BluetoothChat/.DeviceListActivity: 326 ms (total 326 ms) E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) D/BluetoothChat( 1729): onActivityResult -1 D/BluetoothChatService( 1729): connect to: 00:06:66:03:0C:51 D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_CONNECTING E/BluetoothChat( 1729): + ON RESUME + I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_CONNECTING I/BluetoothChatService( 1729): BEGIN mConnectThread E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 I/BluetoothChatService( 1729): CONNECTION FAIL TOSTRING: java.io.IOException: Service discovery failed D/BluetoothChatService( 1729): setState() STATE_CONNECTING - STATE_LISTEN D/BluetoothChatService( 1729): start D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_LISTEN I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID I/NotificationService( 1018): enqueueToast pkg=com.example.android.BluetoothChat callback=android.app.ITransientNotification$Stub$Proxy@446327c8 duration=0 I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID The device I'm trying to connect to is the 00:06:66:03:0C:51 which I can scan for and apparently pair with just fine. The below is merged from a similar question which was successfully resolved by the selected answer here: How can one connect to an rfcomm device other than another phone in Android? The Android API provides examples of using listenUsingRfcommWithServiceRecord() to set up a socket and createRfcommSocketToServiceRecord() to connect to that socket. I'm trying to connect to an embedded device with a BlueSMiRF Gold chip. My working Python code (using the PyBluez library), which I'd like to port to Android, is as follows: sock = bluetooth.BluetoothSocket(proto=bluetooth.RFCOMM) sock.connect((device_addr, 1)) return sock.makefile() ...so the service to connect to is simply defined as channel 1, without any SDP lookup. As the only documented mechanism I see in the Android API does SDP lookup of a UUID, I'm slightly at a loss. Using "sdptool browse" from my Linux host comes up empty, so I surmise that the chip in question simply lacks SDP support.

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >