Search Results

Search found 8843 results on 354 pages for 'partition master'.

Page 29/354 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

  • Cannot boot into system after deleting partition

    - by Clayton
    Okay...so this was kind of a stupid thing for me to do now that I think back on it. I was experiencing a ton of lag and not as much memory that I could use after installing Ubuntu 12.04. So after remembering I had installed multiple server versions of Ubuntu 12.04 by mistake, I went into Disk Management and proceeded to delete each and every one. Everything went fine. Up until this week, I have not experienced any problems. But starting yesterday I began to get lag just as I had before, and nothing fixed the problem. I decided to remove the Ubuntu partition, since I was also experiencing a visual error when given the option to select one to boot(the screen doesn't come up at all, and I recieved a monitor resolution error instead, but could still access both Windows and Ubuntu via arrow keys). After deleting the Ubuntu partition, so that I could see if running just Windows would fix the problem, I proceeded with what I was doing, installing a few programs that were not tied to my prediciment in any way. Upon rebooting my desktop, however, I recieved the following error: error: unknown filesystem. grub rescue> Hoping I could boot into Ubuntu via a pendrive and possibly backup my important files and wipe the hard drive to start fresh, I installed Ubuntu 13.04, but even that does not boot. Instead, I get this message on a terminal screen: SYSLINUX 4.06. EDD 4.06-pre1 Copyright (C) 1994-2011 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! boot: So more or less, my desktop is screwed. I need to be able to get to the files inside because of my job as an artist, as well as retrieve my documents for my stories stored on Windows. Once I can succeed in solving this once and for all, I know for a fact I will stick to Ubuntu only, and install what is required to be able to run any Windows applications I used to use or need to use. I would rather not reformat the hard drive, and if I need to, it is a last resort. And I doubt I can use a Windows Recovery Disk to get my files back, as my mom has thrown out a lot of the installation disks and paperwork I would need to even follow through with that. :\ Keep in mind that I am a novice/newbie when it comes to Linux, but am hoping ot become better at it as time goes by. I appreciate any help you guys can give me. This will probably be the last time I attempt to do anything that could risk the well-being of my PC. (I've also looked through various questions on the site and tested a lot of the solutions. None seem to have worked.)

    Read the article

  • Can't format / delete locked partition from gparted?

    - by tech
    I cannot format my hard disk for ubuntu installation. It has Fedora installed in it. I wonder how to unlock the locked partition to delete and format it, since I am stucked at installing ubuntu. I am now using a livecd to do the task. No options are available for me to use. Link to screenshot: http://img822.imageshack.us/img822/7929/screenshotfrom201211151.png If you have any questions, please ask below.

    Read the article

  • Ubuntu 12.04 Automounting ntfs partition

    - by kuzyt
    Ive looked everywhere to fix this problem but I cant seem to figure out why its doing this. I have the following /etc/fstab entry to mount a ntfs partition using ntfs-3g. UUID=01CD842715EC2180 /media/mediahd02 ntfs defaults,user,noexec,uid=1000,gid=1000,dmask=007,fmask=117 0 2 The volume label for this partition is "MEDIA02" So I have had no problems with the fstab mounting. The problem however is that it automounts again using MEDIA02 label. I'm not sure automounting is the right term for this as its just an empty directory. Deleting this directory and rebooting is causing it to appear again. So listing /media I see both MEDIA02 & mediahd02 htpc@htpc:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdf1 during installation UUID=ec027544-b0e7-4145-99a4-905543a9781a / ext4 errors=remount-ro,noatime,discard 0 1 # swap was on /dev/sdf5 during installation UUID=1794409e-723f-41ac-9f31-ae059f377613 none swap sw 0 0 # Added all the lines below this tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 UUID=0F70-3B06 /media/mediahd01 vfat defaults,user,noexec,uid=1000,gid=1000,dmask=007,fmask=117 0 2 UUID=01CD842715EC2180 /media/mediahd02 ntfs defaults,user,noexec,uid=1000,gid=1000,dmask=007,fmask=117 0 2 htpc@htpc:~$ cat /etc/mtab /dev/sdc1 / ext4 rw,noatime,errors=remount-ro,discard 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /tmp tmpfs rw,noatime,mode=1777 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 /dev/sdc1 /media/usbhd-sdc1 ext4 rw,relatime 0 0 /dev/sdb1 /media/mediahd02 fuseblk rw,noexec,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 /dev/sda5 /media/mediahd01 vfat rw,noexec,nosuid,nodev,uid=1000,gid=1000,dmask=007,fmask=117 0 0 /dev/sdh1 /media/Windows_7 fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 Can someone shed some light as to why its doing this ?

    Read the article

  • How to mount ext4 partition?

    - by Flint
    How do I mount an ext4 partition as my user account so I wouldn't require root access to r/w on it? I used -o uid=flint,gid=flint on the mount command but I keep getting mount: wrong fs type, bad option, bad superblock on /dev/sda7, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Another thing, I want avoid using udisks for now as it doesn't let me mount to my specified mount point name.

    Read the article

  • What location to put bootloader, when running multiple drives and partition

    - by Matt G
    I have Win8 on my desktop, where a 120G SSD is used to run windows and some select applications, while I have a 2TB HDD to provide basic file storage and where possible, install applications instead of on the SSD. I want to install Ubuntu on a new partition of the HDD (I allocated 300GB, with 5GB swap file). I've used a USB to install the OS, which seemed to have done the job. However, after prompting for a restart, I can no longer boot to ubuntu. During instillation I was confused about where to install the "boot loader instillation". I ended up selecting "/dev/stb" because I figured I would be able to boot with BIOS by selecting the HDD drive as a priority over the SSD. The bootloader is a large part of where I think I went wrong. My partition system looked something like this: /dev/sta ... //SSD ~120 GB /dev/sta1 NTFS (350 MB) //Win8System /dev/sta2 NTFS (118 GB) //Win8C-Drive /dev/stb ... //HDD ~2TB /dev/stb1 NTFS (1563 GB) //FileStorage /dev/stb5 Free Space (300 GB) //Space I want to use for Linux (NOTE: Created two partitions from the 300GB, ~5GB and 295GB. stb5,stb6.) It'd be great if I could get an explanation of what drive you'd select for the boot loader and why, and what selections won't work with regards to the Boot Loader Instillation. I think I understand what Grub is, but I have no idea on how to use it, or play around with it. I seem to be able to get back into OS from my usb, however I believe it's just showing me a preview/trial of Ubuntu (ie, can't access any of the system NTFS drives). Note, if I try to install from the USB again, it will recognize that a version of Ubuntu 13.10 exists on the system. Apologies in advance, have used windows all my life, don't really know to much about Linux at all. Did have a brief skim over some similar questions, didn't find anything too useful. - Where to install bootloader when installing Ubuntu as secondary OS? - ubuntu 12.10 dual boot with windows 8 on two hdds - Dual-boot Windows 7 and Ubuntu on two SSDs with UEFI

    Read the article

  • Partition resize

    - by borax12
    I have a dual boot system with 1.C:drive with windows 227 GB 2.E: drive in windows 185 GB 3.Ext4 Ubuntu - 38 GB 4.Linux swap - 4 GB I want to decrease the space from E: drive from 185 GB to say about 160 GB and assign the 25 GB achieved from the resizing to the ext4 partition so that my ubuntu home has more space I was told that do a resize in gparted could cause some boot problems,please tell me a safe way to achieve this resizing

    Read the article

  • Opening a NTFS partition fails with report: Not authorised

    - by Dugi
    Besides lesser errors on 11.10, I ran into a more annoying one: I cannot access NTFS partitions. No matter whether I use nautilus, dolphin, tux commander or archive manager, always does the same thing, could not mount 'disc name': Not authorised' There were several fixes of problems with access to NTFS partitions, but none of them helped. When I used nautilus in sudo mode, the partition looked empty, although when I booted on windows, there were files. It was reported as a bug somewhere. Can anyone help me?

    Read the article

  • Message "Sparse file not allowed" after succesfull install without swap-partition

    - by FUZxxl
    I've installed Ubuntu without creating a swap partition and with / on a btrfs.# Now I get the message "Sparse file is not allowed" on each boot. This message appears before the splash-screen. Is there a way to kill this warning? # I use some programs that tend to get havoc on memory usage. To prevent them from killing my system, I let the OOM killer do the rest when out of memory rather than making my system unreasonably slow by excessive swapping.

    Read the article

  • High CPU load for 1:30 minutes when mounting ext4-raid partition

    - by sirion
    I have a raid 5 (software) with 5x2TB drives. I encrypted the raid with cryptsetup and put an ext4-partition on top. In the beginning opening and mounting the raid took less than 10 seconds, now (for a few weeks) mounting alone takes 1:30 minutes and the cpu stays around 93% the whole time: The output of "time sudo mount /dev/mapper/8000 /media/8000" is: real 1m31.952s user 0m0.008s sys 1m25.229s At the same time only one line is added to /var/log/syslog: kernel: [ 2240.921381] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) My Ubuntu-version is "12.04.1 LTS" and no updates are pending. I checked the partition with fsck, but it says that all is ok. The "cryptsetup luksOpen" command only takes a few seconds. I also tried changing the raid-bitmap (as it was suggested in some forum) but it did not change the behaviour. sudo mdadm --grow /dev/md0 -b internal and sudo mdadm --grow /dev/md0 -b none I had the idea that it might be the hardware being slow, but a read test with "sudo hdparm -t /dev/md0" spit out values between 62 and 159 MB/sec: Timing buffered disk reads: 382 MB in 3.00 seconds = 127.14 MB/sec Timing buffered disk reads: 482 MB in 3.02 seconds = 159.62 MB/sec Timing buffered disk reads: 190 MB in 3.03 seconds = 62.65 MB/sec Timing buffered disk reads: 474 MB in 3.02 seconds = 157.12 MB/sec Although I think it is strange that the read rate jumps by more than 100% - could that mean something? The speed test when reading from the mapped (decrypted) device shows similar behavior, although it is of course much slower. "sudo hdparm -t /dev/mapper/8000": Timing buffered disk reads: 56 MB in 3.02 seconds = 18.54 MB/sec Timing buffered disk reads: 122 MB in 3.09 seconds = 39.43 MB/sec Timing buffered disk reads: 134 MB in 3.02 seconds = 44.35 MB/sec The output of a verbose mount "mount -vvv /dev/mapper/8000 /media/8000" does not help much: mount: fstab path: "/etc/fstab" mount: mtab path: "/etc/mtab" mount: lock path: "/etc/mtab~" mount: temp path: "/etc/mtab.tmp" mount: UID: 0 mount: eUID: 0 mount: spec: "/dev/mapper/8000" mount: node: "/media/8000" mount: types: "(null)" mount: opts: "(null)" mount: you didn't specify a filesystem type for /dev/mapper/8000 I will try type ext4 mount: mount(2) syscall: source: "/dev/mapper/8000", target: "/media/8000", filesystemtype: "ext4", mountflags: -1058209792, data: (null) Any idea where I could find additional information on why mounting takes so long, or what additional tests I could run?

    Read the article

  • fdisk shows overlapping partitions

    - by Campa
    At every boot to start Ubuntu, a partition gets re-mounted more than 1 times, sometimes causing very long boots. Example below: > dmesg ... [ 21.472020] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro ... [ 42.021537] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 ... I suspect there is a problem of overlapping partitions here, regarding sda4 and sda5: > sudo fdisk -l Device Boot Start End Blocks Id System /dev/sda1 63 610469 305203+ de Dell Utility /dev/sda2 612352 32069631 15728640 7 HPFS/NTFS/exFAT /dev/sda3 * 32069632 238979788 103455078+ 7 HPFS/NTFS/exFAT /dev/sda4 238983166 625141759 193079297 5 Extended /dev/sda5 238983168 612630527 186823680 83 Linux /dev/sda6 612632576 625141759 6254592 82 Linux swap / Solaris Further details: > more /etc/fstab ... # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=b33be99b-5c9e-449e-ad48-be608aeff001 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda7 during installation UUID=7c9071cc-b77b-40da-9f80-6b8a9a220cb1 none swap sw and > mount /dev/sda5 on / type ext4 (rw,errors=remount-ro,commit=0) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/piero/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=piero) I am Running Ubuntu Oneiric + LXDE on Dell Studio XPS machine 64-bit, dual booting with Windows 7. A months ago, I resized the Ubuntu partition and maybe I messed up something by doing that. Do you have any idea, why this long booting is happening?

    Read the article

  • Partition resize[SOLVED]

    - by borax12
    I have a dual boot system with 1.C:drive with windows 227 GB 2.E: drive in windows 185 GB 3.Ext4 Ubuntu - 38 GB 4.Linux swap - 4 GB I want to decrease the space from E: drive from 185 GB to say about 160 GB and assign the 25 GB achieved from the resizing to the ext4 partition so that my ubuntu home has more space I was told that do a resize in gparted could cause some boot problems,please tell me a safe way to achieve this resizing

    Read the article

  • Resize/Create a New Partition in GParted

    - by Charlie
    So I've been having some trouble recently with Ubuntu and decided it was time to switch to windows. But I have no ntfs partitions on my hard disk and GParted will not let me resize my one large partition (/dev/sda1) so that I can allocate some ntfs space to install windows on. Any help would be greatly appreciated, I've had this problem for quite some time now and it had just become one big headache. Thanks in advance!

    Read the article

  • Master/Slave DNS setup vs. rsync'ed DNS servers

    - by Jakobud
    We currently have primary and secondary DNS servers on our corporate network. They are setup in a master/slave type setup, where the slave gets its DNS information from the master. I'm trying to figure out what the real advantage is for the master/slave setup instead of just setting up an automated rsync between the two to keep the DNS settings matched. Can anyone shed some light on this? Or is it just a preferential thing? If that is the case, it seems like the rsync setup would be much easier to setup, maintain and understand.

    Read the article

  • puppet master REST API returns 403 when running under passenger works when master runs from command line

    - by Anadi Misra
    I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work?

    Read the article

  • CARP: two machines think they're the master, but only on one interface

    - by Conor McDermottroe
    I have two machines, each configured identically as a firewall/load balancer for a busy website. I have set them up with CARP and pfsync on both the internal and external interfaces. The internal interface is behaving as expected (primary listed as MASTER and secondary listed as BACKUP) On both machines, the network interfaces are as follows: em0 - External interface bge0 - Internal interface bge1 - Crossover connection between both machines carp0 - Shared external interface for CARP carp1 - Shared internal interface for CARP I've rewritten the IP addresses and MAC addresses below. The networks are as follows: 10.0.1.0/24 - External network 10.0.2.0/24 - Internal network 10.0.3.0/24 - Crossover network Here's the output from ifconfig on the primary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.10 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.10 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.10 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.11 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 0 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: MASTER vhid 2 advbase 1 advskew 0 And here's the /etc/rc.conf excerpt from the primary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.10 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.11" And here's the output on the secondary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.11 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.11 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.11 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.10 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 20 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: BACKUP vhid 2 advbase 1 advskew 20 And here's the /etc/rc.conf excerpt from the secondary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.11 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] advskew 20 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] advskew 20 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.10" What I don't understand is, the carp status on carp0 is MASTER on both machines when the status on carp1 is as it should be (MASTER on the primary and BACKUP on the secondary). What am I missing? Where should I be looking for clues?

    Read the article

  • Both servers running keepalived become master

    - by pcent
    After a network failure,both servers running keepalived become master. When the network is reestablished, both keep the MASTER state. What could be causing it? Edited: Another information that might be relevant, each server has two NICs. Here is the virtual instance configuration: vrrp_instance VGAPP { interface eth0 virtual_router_id 61 state BACKUP nopreempt priority 50 advert_int 3 virtual_ipaddress { 10.26.57.61/24 } track_interface { eth0 } track_script { jboss_check #tomcat_check #interface_check #interface_check02 } notify_master "/opt/keepalived/scripts/set_state.sh MASTER" notify_backup "/opt/keepalived/scripts/set_state.sh BACKUP" notify_fault "/opt/keepalived/scripts/set_state.sh FAULT" notify_stop "/opt/keepalived/scripts/set_state.sh STOPPED"}

    Read the article

  • Multiple client connecting to master MySQL over SSL

    - by Bastien974
    I successfully configured a MySQL replication over SSL between 2 servers accross the internet. Now I want a second server in the same location as the replication slave, to open a connection to the master db over ssl. I used the same command found here http://dev.mysql.com/doc/refman/5.1/en/secure-create-certs.html to generate a new set of client-cert.pem and client-key.pem with the same master db ca-cert/key.pem and I also used a different Common Name. When I try to initiate a connection between this new server and the master db, it fails : mysql -hmasterdb -utestssl -p --ssl-ca=/var/lib/mysql/newcerts/ca-cert.pem --ssl-cert=/var/lib/mysql/newcerts/client-cert.pem --ssl-key=/var/lib/mysql/newcerts/client-key.pem ERROR 2026 (HY000): SSL connection error It's working without SSL.

    Read the article

  • How to programmatically control slave computer on BIOS level?

    - by PovilasSid
    I want to run some test on hardware level. My goal is to create or find a way to control one computer from another down to BIOS settings changing. For example: Master computer sends a signal for slave to restart and opens BIOS settings dialog. Master computer sends a signal to slave to change BIOS parameters and then restart. Then slave fully boots up master starts up some software on slave. Then software finishes operations cycle continues till certain conditions are met. I know that I am looking for a complex thing but mainly what I need are correct keywords because now I am being flooded by BIOS configurations tutorials. Main concerns: Is it possible without using any custom tailer chip? How can master monitor salve`s hardware activity? How to let master handled more than one slave? How what connections are needed to create this kind of setup? (cables)

    Read the article

  • Mysql dump of slave w/o missing Master data

    - by zooooommmm
    I am fairly new to the whole replication process of mysql so this may be an easy question to answer. I have a master and and slave. I need to set up another slave so obviously I will need to make the dump from the current slave because I CAN NOT take the master offline for a second. How can I be sure that during the time I am making the dump of the current slave database that I do not miss any master data that is newly created over that time? Thanks all.

    Read the article

  • Git multi-master, is it possible?

    - by Fran
    Hi, Is it possible to set a dual master GIT repositories? I would like to set up two different servers which I could push and commit to and changes on any of them would be propagated to the other. I've googled for it, but the most similar solution I've found is Gerrit2, but it does only one way replication (master - master). Does anybody know if this is even possible to do with git? If so, could you please tell me which tools to use? Thanks in advance.

    Read the article

  • Macro - maintain paste link if new row is added to master spreadsheet

    - by Ross McLaughlin
    I have a master spreadsheet that has a portion of data (say columns a to e) that paste links to a report. Each row paste links to its own report. If I add a new row to the master spreadsheet I now have the wrong data linking into my reports. I know if I have the reports open when a change is made to the master it will update the reports. However, with the number of reports I will soon have this will no longer be practical. Is there a macro or formula that can be added to maintain the correct data link. I have no real knowledge on such matters and as much information as possible would be greatly appreciated. Many thanks in advance.

    Read the article

  • Does ASP.Net MVC require you to use master pages?

    - by stocherilac
    My group is working on a new web application and is considering using MVC. However, there are members who would rather include pages than use master pages. Is this possible to do in ASP.NET MVC? In the small amount of time that I've poked around with MVC I have not yet been able to figure out how one might accomplish that.

    Read the article

  • UISplitViewController Cannot Change the Master View Controller?

    - by Nex
    I am trying to change the master view controller (that appears in the popover in portrait, and on the left side in landscape) in a UISplitViewController. I'd like to switch between the master view controller being one of two different UIViewControllers (depending on an action taken elsewhere in my application). I am using the following: mySplitViewController.viewControllers = [NSArray arrayWithObjects:newMasterController, detailController, nil]; This correctly changes the master viewcontroller as you would expect in landscape mode. However it does not seem to change the viewcontroller used for the popover in portrait mode. I notice that the barbuttonitem to show this master view controller is just calling showMasterInPopover: on the splitviewcontroller, and so would expect it to work in portrait mode as well, but it does not. In fact, I can set the master view controller, see the new viewController correctly in landscape mode, rotate back to portrait, and the viewcontroller used in the popover is still the old one. Is this a bug?

    Read the article

  • ASP.NET Nested masterpages, how to set content in the top page from the aspx file?

    - by David Suarez
    I have some content from a CMS that I need to move to raw asp.net pages. Since the templates are nested I guess I can use nested masterpages to acomplish it, but I'm finding that I can't set values on the top masterpage from the deep child page. Here is a sample. I have several nested masterpages with contentplaceholders: top master (with contentPlaceHolder1) nested master, dependent on top master (with contentPlaceHolder2) aspx page, dependent on nested master, defines content for contentPlaceHolder1 and 2 The problem is that asp.net doesn't allow me to have the value of contentPlaceHolder1 defined in the content page, it should be defined in the nested master. But the point is that the client page knows that value, not the template masters (for instance, the page knows about the graphic it has to display on the the top, but the placeholder for the graphic is the top master). How can I set values in the aspx page to be rendered in the top master?

    Read the article

  • Change the current branch to master in git

    - by Karel Bílek
    I have a repository in git. I made a branch, then did some changes both to the master and to the branch. Then, tens of commits later, I realized the branch is in much better state than the master, so I want the branch to "become" the master and disregard the changes on master. I cannot merge it, because I don't want to keep the changes on master. What should I do? (this will very possibly be a duplicate question, since it is trivial, but I have not found it here)

    Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >