Search Results

Search found 3193 results on 128 pages for 'reboot'.

Page 29/128 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Problem with bootstrap loader and kernel

  - by dboarman-FissureStudios

  We are working on a project to learn how to write a kernel and learn the ins and outs. We have a bootstrap loader written and it appears to work. However we are having a problem with the kernel loading. I'll start with the first part: bootloader.asm: [BITS 16] [ORG 0x0000] ; ; all the stuff in between ; ; the bottom of the bootstrap loader datasector dw 0x0000 cluster dw 0x0000 ImageName db "KERNEL SYS" msgLoading db 0x0D, 0x0A, "Loading Kernel Shell", 0x0D, 0x0A, 0x00 msgCRLF db 0x0D, 0x0A, 0x00 msgProgress db ".", 0x00 msgFailure db 0x0D, 0x0A, "ERROR : Press key to reboot", 0x00 TIMES 510-($-$$) DB 0 DW 0xAA55 ;************************************************************************* The bootloader.asm is too long for the editor without causing it to chug and choke. In addition, the bootloader and kernel do work within bochs as we do get the message "Welcome to our OS". Anyway, the following is what we have for a kernel at this point. kernel.asm: [BITS 16] [ORG 0x0000] [SEGMENT .text] ; code segment mov ax, 0x0100 ; location where kernel is loaded mov ds, ax mov es, ax cli mov ss, ax ; stack segment mov sp, 0xFFFF ; stack pointer at 64k limit sti mov si, strWelcomeMsg ; load message call _disp_str mov ah, 0x00 int 0x16 ; interrupt: await keypress int 0x19 ; interrupt: reboot _disp_str: lodsb ; load next character or al, al ; test for NUL character jz .DONE mov ah, 0x0E ; BIOS teletype mov bh, 0x00 ; display page 0 mov bl, 0x07 ; text attribute int 0x10 ; interrupt: invoke BIOS jmp _disp_str .DONE: ret [SEGMENT .data] ; initialized data segment strWelcomeMsg db "Welcome to our OS", 0x00 [SEGMENT .bss] ; uninitialized data segment Using nasm 2.06rc2 I compile as such: nasm bootloader.asm -o bootloader.bin -f bin nasm kernel.asm -o kernel.sys -f bin We write bootloader.bin to the floppy as such: dd if=bootloader.bin bs=512 count=1 of/dev/fd0 We write kernel.sys to the floppy as such: cp kernel.sys /dev/fd0 As I stated, this works in bochs. But booting from the floppy we get output like so: Loading Kernel Shell ........... ERROR : Press key to reboot Other specifics: OpenSUSE 11.2, GNOME desktop, AMD x64 Any other information I may have missed, feel free to ask. I tried to get everything in here that would be needed. If I need to, I can find a way to get the entire bootloader.asm posted somewhere. We are not really interested in using GRUB either for several reasons. This could change, but we want to see this boot successful before we really consider GRUB.

  Read the article

• Got a minus one from a read call.

  - by sunyata

  I connect to a database with read only access using SQL developer. It's a TNS connection. I use a tnsnames.ora, forwarding port script and SQL Developer. In the past, occasionally, when connecting, I get a error message Got a minus one from a read call. Vendor Code 0 If I do a reboot, it goes away. Another friend suggested changed the forwarding port which worked for him. I recently upgraded to a new computer and now it seems that I am getting the error message consistently. Reboot or changing forwarding port does not help at all. The port forwarding script contains something like this putty -L ::1521 Does anybody have any idea? Thanks.

  Read the article

• SQL CLR not properly enabling

  - by dnolan

  We have a SQL server running SQL 2005 Workgroup 64 bit (9.0.4273), on Windows 2003 server 64 bit. We have run sp_configure and reconfigured the server which indicates that the clr is now enabled. exec sp_configure 'clr enabled', '1' go reconfigure go However, when trying to call CREATE ASSEMBLY the server completely dies on us and we have to do a full reboot of the machine. A little more diagnostic information, even though clr enabled is set to 1 and we have rebooted the full server, running the following statement select * from sys.dm_clr_properties returns directory version state locked CLR version with mscoree which is what it says when the CLR is not enabled on another machine. On a correctly enabled machine (after reboot) this function reads directory C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ version v2.0.50727 state CLR is initialized

  Read the article

• Timer in windows service

  - by Markus

  Hi. I have an issue with System.Threading.Timer. I am scheduling some actions using a time in a windows service. The timer starts executing the callback after a specified dueTime period. The windows service starts up after reboot automatically. However, I have observed a strange thing after a system reboot- the callback method starts executing itself 3 or 4 minutes before the specified period. What might be the reason for such behavior? Here is the sample code: TimeSpan timeToWait = this.StartTime - DateTime.Now; Int64 msToSleep = (Int64)Math.Round(timeToWait.TotalMilliseconds); _timer = new Timer(callback_method, null, msToSleep, MinutesScheduledInterval * 60000); where _timer is a member variable, StartTime - the time when the timer should first fire.

  Read the article

• saving application

  - by Xaver

  how to save application state and restore it after reboot in .NET 3.5 (c#)?

  Read the article

• Windows Question: RunOnce/Second Boot Issues [closed]

  - by Greg

  Moved to Super User: Windows Question: RunOnce/Second Boot Issues I am attempting to create a Windows XP SP3 image that will run my application on Second Boot. Here is the intended workflow. 1) Run Image Prep Utility (I wrote) on windows to add my runonce entries and clean a few things up. 2) Reboot to ghost, make image file. 3) Package into my ISO and distribute. 4) System will be imaged by user. 5) On first boot, I have about 5 things that run, one of which includes a driver updater (I wrote) for my own specific devices. 6) One of the entries inside of HKCU/../runonce is a reg file, which adds another key to HKLM/../runonce. This is how second boot is acquired. 7) As a result of the driver updater, user is prompted to reboot. 8) My application is then launched from HKLM/../runonce on second boot. This workflow works perfectly, except for a select few legacy systems that contain devices that cause the add hardware wizard to pop up. When the add hardware wizard pops up is when I begin to see problems. It's important to note, that if I manually inspect the registry after the add hardware wizard pops up, it appears as I would expect, with all the first boot scripts having run, and it's sitting in a state I would correctly expect it to be in for a second boot scenario. The problem comes when I click next on the add hardware wizard, it seems to re-run the single entry I've added, and re-executes the runonce scripts. (only one script now as it's already executed and cleared out the initial entries). This causes my application to open as if it were a second boot, only when next is clicked on the add hardware wizard. If I click cancel, and reboot, then it also works as expected. I don't care as much about other solutions, because I could design a system that doesn't fully rely on Microsoft's registry. I simply can't find any information as to WHY this is happening. I believe this is some type of Microsoft issue that's presenting itself as a result of an overstretched image that's expected to support too many legacy platforms, but any help that can be provided would be appreciated. Thanks,

  Read the article

• Backing up my data causes my server to crash using Symantec Backup Exec 12, or How I Came to Loathe Irony

  - by Kyle Noland

  I have a Dell PowerEdge 2850 running Windows Server 2003. It is the primary file server for one of my clients. I have another server also running Windows Server 2003 that acts as the core media server for Symantec Backup Exec 12. I recently upgraded from Backup Exec 11d to 12. This upgrade was necessary because we also just upgraded from Exchange 2003 to Exchange 2007. After the upgrade I had to push-install the new version 12 Backup Exec Remote Agents to each of the servers I am backing up (about 6 total). 5 of my servers are doing just fine, faithfully completing backups every night. My file server routinely crashes. Observations: When the server crashes, it does not blue screen, it just locks up completely. Even the mouse is unresponsive. If you leave the server locked up long enough, it will eventually reboot itself and hang on the Windows splash screen. There is absolutely zero useful Event Viewer evidence of a problem. The logs go from routine logging to an Unexplained Shutdown Event the next morning when I have to hard reset the server to get it to boot. 90% of the time the server does not boot cleanly, it hangs on the Windows splash screen. I don't have any light to shed here. When the server hangs all I can do is hard reset it and try again. Even after a successful boot and chkdsk /r operation, if you reboot the machine, you have a 90% chance it won't back up again cleanly. The back story: This server started crashing during nightly backups about a month ago. I tried everything I could think of to troubleshoot the problem and eventually had to give up because I could not keep coming to the office at 4 AM to try to get the server back online. One Friday I got lucky and the server stayed up for its entire full backup. I took this opportunity to restore the full backup to a temporary server I set up and switched all my users to the temporary. Then I reloaded the ailing file server. I kept all my users on the temporary file server for about 3 weeks. I installed the same Backup Exec Remote Agent and Trend Micro A/V client on the temporary server that I was using on the regular file server. During this time, I had absolutely no problems backing up the temporary server. I tested the reloaded file server extensively. I rebooted the server once an hour every day for 3 weeks trying to make it fail. It never did. I felt confident that the reload was the answer to my problems. I moved all of the data from the temporary server back to the regular server. I got 3 nightly backups out of it before it locked up again and started the familiar failure to boot cleanly behavior. This weekend I decided to monitor the file server through the entire backup job. I RDPd into the file server and also into the server running Backup Exec. On the file server I opened the Task Manager so I could view the processes and watch CPU and memory usage. Everything was running smoothly for about 60GB worth of backup. Then I noticed that the byte count of the backup job in Backup Exec had stopped progressing. I looked back over at my RDP session into the file server, and I was getting real time updates about CPU and memory usage still - both nearly 0%, which is unusual. Backups usually hover around 40% usage for the duration of the backup job. Let me reiterate this point: The screen was refreshing and I was getting real time Task Manager updates - until I clicked on the Start menu. The screen went black and the server locked up. In truth, I think the server had already locked up, the video card just hadn't figured it out yet. I went back into my bag of trick: driving to the office and hard reseting the server over and over again when it hangs up at the Windows splash screen. I did this for 2 hours without getting a successful boot. I started panicking because I did not have a decent backup to use to get everything back onto the working temporary file server. Once I exhausted everything I knew to do, I took a deep breath, booted to the Windows Server 2003 CD and performed a repair installation of Windows. The server came back up fine, with all of my data intact. I can now reboot the server at will and it will come back up cleanly. The problem is that I'm afraid as soon as I try to back that data up again I will back at square one. So let me sum things up: Here is what I've done so far to troubleshoot this server: Deleted and recreated the RAID 5 sets. Initialized the drives. Reloaded the server with a fresh Server 2003 install. Confirmed with Dell that I have installed the latest, Dell approved BIOS and NIC drivers. Uninstalled / reinstalled the Backup Exec Remote Agent. Uninstalled the Trend Micro A/V client. Configured the server not to reboot itself after a blue screen so I can see any stop error. I used to think the server was blue screening, but since I enabled this setting I now know that the server just completely locks up. Run chkdsk /r from the Windows Recovery Console. Several errors were found and corrected, but did not help my problem. Help confirm or deny the following assumptions: There are two problems at work here. Why the server is locking up in the first place, and why the server won't boot cleanly after a lockup. This is ultimately a software problem. The server works fine and can be rebooted cleanly all day long - until the first lockup - following a fresh OS load or even a Repair installation. This is not a problem with Backup Exec in general. All of my other servers back up just fine. For the record, all of the other servers run Server 2003, and some of them house more data than the file server in question here. Any help is appreciated. The irony is almost too much to bear. Backing up my data is what is jeopardizing it.

  Read the article

• Running a Java process in Windows even after the user is logged out

  - by Mani

  I have a batch file that starts a Java process in a Windows 2003 server. As per the security policy, the users of that machine are logged off forcefully, if the user is inactive for a certain period of time. The problem is that when the user is logged out, the process also dies. I scheduled a new task (Control Panel - Scheduled Tasks) and selected the option of 'When my computer starts' and gave the user account details there. But it doesn't seem to have any effect, the user is still logged out and the process dies. Is a reboot necessary to make this change effective? And after the reboot, will I achieve what I'm expecting (keeping the process alive)? Alternatively, will running this process as a Windows Service solve the problem? If so, can you please let me know how I can make a Java program or a batch file to run as a Windows Service? I would prefer not to use any other third party tools or libraries. Thanks

  Read the article

• C# Windows CE 5.0 error: Can't find entry point ExitWindowsEx in PInvoke DLL coredll

  - by JackN

  I need to programatically shutdown a Windows CE 5.0 tablet using Microsoft.NET SDK CompactFramework v2.0. I tried using the solution here but got the error message Can't find entry point ExitWindowsEx in PInvoke DLL coredll Is there a way to add ExitWindowsEx to my build? Do I need a different coredll? [Flags] public enum ExitFlags { Reboot = 0x02, PowerOff = 0x08 } [DllImport("coredll")] public static extern int ExitWindowsEx(ExitFlags flags, int reserved); private static void buttonShutdown_Click(object sender, EventArgs e) { ExitWindowsEx(ExitFlags.PowerOff, 0); } private static void buttonRestart_Click(object sender, EventArgs e) { ExitWindowsEx(ExitFlags.Reboot, 0); }

  Read the article

• IIS 8 - PHP Manager - Enabling php_oci8.dll for Oracle Connection

  - by Jemru

  I would need to connect to Oracle DB in my PHP codes. I'm using Windows Server 2012, IIS 8 with PHP Manager. I opened IIS PHP Manager, then go to PHP Extensions, then I enabled "php_oci8.dll" extension. However when I tried to connect to Oracle DB I'm getting the following PHP error: PHP Fatal error: Call to undefined function oci_connect() I just restarted the IIS using the IIS Manager, but didn't done computer reboot. Do I need to reboot? Do I also need to download "instantclient-basic-windows.x64-12.1.0.1.0.zip"? If yes, do I just need to set it to classpath "Path" where I extracted? Thank you very much in advance.

  Read the article

• Nagios plugin script not working as expected

  - by Linker3000

  I have modified an off-the-shelf Nagios plugin perl script to (in theory) return a one or zero according to the existence, or not, of a file on a remote linux server. The script runs a remote ssh session and logs in as the nagios user. The remote linux servers have private keys setup for that user, and on the bash command line the script works as expected, but when run as a plugin it always returns '1' (true) even if the file does not exist. Some help with the logic or a comment on why things are not working as expected within Nagios would be appreciated. I'd prefer to use this ssh login method rather than having to install nrpe on all the linux servers. To run from a command line (assuming remote server has a user called nagios with a valid private key): ./check_reboot_required -e ssh -H remote-servers-ip-addr -p 'filename-to-check' -v Ta. #! /usr/bin/perl -w # # # License Information: # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # ############################################################################ use POSIX; use strict; use Getopt::Long; use lib "/usr/lib/nagios/plugins" ; use vars qw($host $opt_V $opt_h $opt_v $verbose $PROGNAME $pattern $opt_p $mmin $opt_e $opt_t $opt_H $status $state $msg $msg_q $MAILQ $SHELL $device $used $avail $percent $fs $blocks $CMD $RMTOS); use utils qw(%ERRORS &print_revision &support &usage ); sub print_help (); sub print_usage (); sub process_arguments (); $ENV{'PATH'}=''; $ENV{'BASH_ENV'}=''; $ENV{'ENV'}=''; $PROGNAME = "check_reboot_required"; Getopt::Long::Configure('bundling'); $status = process_arguments(); if ($status){ print "ERROR: processing arguments\n"; exit $ERRORS{'UNKNOWN'}; } $SIG{'ALRM'} = sub { print ("ERROR: timed out waiting for $CMD on $host\n"); exit $ERRORS{'WARNING'}; }; $host = $opt_H; $pattern = $opt_p; print "Pattern >" . $pattern . "< " if $verbose; alarm($opt_t); #$CMD = "/usr/bin/find " . $pattern . " -type f 2>/dev/null| /usr/bin/wc -l"; $CMD = "[ -f " . $pattern . " ] && echo 1 || echo 0"; alarm($opt_t); ## get cmd output from remote system if (! open (OUTPUT, "$SHELL $host $CMD|" ) ) { print "ERROR: could not open $CMD on $host\n"; exit $ERRORS{'UNKNOWN'}; } my $perfdata = ""; my $state = "3"; my $msg = "Indeterminate result"; # only first line is relevant in this iteration. while (<OUTPUT>) { my $result = chomp($_); $msg = $result; print "Shell returned >" . $result . "< length is " . length($result) . " " if $verbose; if ( $result == 1 ) { $msg = "Reboot required (NB: Result still not accurate)" . $result ; $state = $ERRORS{'WARNING'}; last; } elsif ( $result == 0 ) { $msg = "No reboot required (NB: Result still not accurate) " . $result ; $state = $ERRORS{'OK'}; last; } else { $msg = "Output received, but it was neither a 1 nor a 0" ; last; } } close (OUTPUT); print "$msg | $perfdata\n"; exit $state; ##################################### #### subs sub process_arguments(){ GetOptions ("V" => \$opt_V, "version" => \$opt_V, "v" => \$opt_v, "verbose" => \$opt_v, "h" => \$opt_h, "help" => \$opt_h, "e=s" => \$opt_e, "shell=s" => \$opt_e, "p=s" => \$opt_p, "pattern=s" => \$opt_p, "t=i" => \$opt_t, "timeout=i" => \$opt_t, "H=s" => \$opt_H, "hostname=s" => \$opt_H ); if ($opt_V) { print_revision($PROGNAME,'$Revision: 1.0 $ '); exit $ERRORS{'OK'}; } if ($opt_h) { print_help(); exit $ERRORS{'OK'}; } if (defined $opt_v ){ $verbose = $opt_v; } if (defined $opt_e ){ if ( $opt_e eq "ssh" ) { if (-x "/usr/local/bin/ssh") { $SHELL = "/usr/local/bin/ssh"; } elsif ( -x "/usr/bin/ssh" ) { $SHELL = "/usr/bin/ssh"; } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } } elsif ( $opt_e eq "rsh" ) { $SHELL = "/usr/bin/rsh"; } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } unless (defined $opt_t) { $opt_t = $utils::TIMEOUT ; # default timeout } unless (defined $opt_H) { print_usage(); exit $ERRORS{'UNKNOWN'}; } return $ERRORS{'OK'}; } sub print_usage () { print "Usage: $PROGNAME -e <shell> -H <hostname> -p <directory/file pattern> [-t <timeout>] [-v verbose]\n"; } sub print_help () { print_revision($PROGNAME,'$Revision: 0.1 $'); print "\n"; print_usage(); print "\n"; print " Checks for the presence of a 'reboot-required' file on a remote host via SSH or RSH\n"; print "-e (--shell) = ssh or rsh (required)\n"; print "-H (--hostname) = remote server name (required)"; print "-p (--pattern) = File pattern for find command (default = /var/run/reboot-required)\n"; print "-t (--timeout) = Plugin timeout in seconds (default = $utils::TIMEOUT)\n"; print "-h (--help)\n"; print "-V (--version)\n"; print "-v (--verbose) = debugging output\n"; print "\n\n"; support(); }

  Read the article

• How do I add "Press any key to boot from usb" when installing Windows from a flash drive? (Grub4dos question / how to remove a bootloader)

  - by Vincent

  Hi there! I've been struggling with this problem for a while now and finially decided to ask for help. Let me first explain what the main purpose of the app is: to provide the a very easy to use way of backing up files, after which I format the drive and start Windows 7 setup. I do this by booting WinPE, which runs a script to detect Windows installations and then opens a file browser. After the file browser is closed, the script continues and formats the drive that contains the Windows installation, and starts an unattended Windows 7 install. Now here is the problem: When you start Windows setup or WinPE from a dvd, you get a nice option to "Press any key to boot from DVD". This is to prevent the computer from booting the DVD when the first phase of the installation is complete and the computer reboots. However, when booting from a flash drive, Windows does not provide this option: it simply boots the flash drive every reboot. To replicate the "press any key" function, I installed Grub4Dos, which works great. It provides a small menu, the first standard item being "Continue installation", the second being "start installation". After quite a lot of tweaking, I got everything working: Start installation starts WinPE, which in turn starts the Windows installation. At first reboot, the Grub4Dos menu comes up, counts 5 seconds and boots the second stage of the installation. Here, I am greeted with the error: "Windows setup could not configure windows to run on this computer's hardware." When I boot into WinPE the normal way (put the bootmgr on the stick root) and change my bios to boot from the primary hdd after first reboot, I don't get this error. I've been looking around, and the only thing I could find was that the BIOS automatically names the boot device hd0, and that Windows can only be run / installed to hd 0. I'm not sure if this is the problem. I read about remapping to solve this problem, but to do that you have to know the phisical location of the hard drive and partition, like hd(0,1). I want this flash drive to work on any PC, regardless of where the OS is installed, so that's not really a possibility. A possible fix I thought of is removing the bootloader from the flash drive when I'm in WinPE. That way, when the pc reboots the BIOS will not see the flash drive as a boot drive and instead boot the primary hdd. I have yet to find a way to do this. Thank you for reading my question, and if you have any suggestion, please do.

  Read the article

• Active MQ showing more than one (ghost) consumer

  - by Shoey

  We have a system that uses ActiveMQ (Queues) - and have exactly one producer and one consumer (implemented as a Windows Service in .NET). Over the weekend, the infrastructure team had a reboot of the servers on the network, and from then on we noticed that there are more than one ghost consumer appearing that listens to the queue and we also suspect reads and deletes the messages. My questions are: is there any way from the Active MQ management console to find out what the consumers are (hostnames, etc). and Are there any scenarios in which inadvertent consumers get 'created'? For instance, there were suggestions about the active MQ journal folders getting corrupted after a reboot, or there is another suggestion that another machine with Active MQ broker automatically makes itself a consumer of all the queues on the main/live active mq server.

  Read the article

• Windows fonts not immediately useable in application after installing?

  - by Jappie

  Whenever I install a new font on a Windows 2003 server, I can't use it immediately in my asp.net web application. The application gets the font through the CreateFontIndirect gdi32.dll win api. It seems like fonts get cached somewhere, because I will just get the default font returned. The font cache gets updated after a reboot, and then I get the correct font, but obviously I wouldn't like to do a reboot on a production server just for getting a new font to work. Is there a way to flush the font cache?

  Read the article

• gprof and execl() - is it possible?

  - by Chris

  Background: I have a game (an old-school-esque MUD) which I've been attempting to profile with gprof. The documentation of gprof (on Linux 2.6) states that The profiled program must call "exit"(2) or return normally for the profiling information to be saved in the gmon.out file. Now, if I kill the server with the shutdown command, the application "returns normally" (i.e., main() returns) and I get a gmon.out to analyze. However, it's far more common to reboot the server. The reboot command does the following: Writes usernames and socket FD numbers to disc. Makes a call to execl(). The new process looks for the stored data, picks up the FDs, and moves on. I see the following error on the command line, as the whole process fails: Profiling timer expired ./program Question: Is it possible to get a gmon.out file from the execl()-calling process? Perhaps some environmental parameter to execl(), or else perhaps a different, gprof-friendly, system call to achieve the same effect (beginning a new process while preserving file descriptors)?

  Read the article

• Clickonce + .net client profile 4 framework + offline

  - by grimmersnee

  Hi, I have a windows form project using VS2010 and I am deploying using clickonce. I need the application to work offline as well as online. I have configured the prerequisite - .net client profile 4 and set the location to the same as the application. Everything seems to work as expected, but upon testing I have found it takes 5+ minutes to install the .net client profile 4 and it also requires a reboot. Why does it take so long to install offline (I thought this was going to be mega fast like promised? And why does it require a reboot!!!!????

  Read the article

• Ubuntu 10.10, taskbar

  - by Alex

  I launched system monitor to kill one program, which didn't responded on any mouse clicks, etc. But i occasionally killed another process. so, taskbar was killed. (it was in the bottom of the screen, in the top all is good) reboot didnt help o_O. Now I use Alt-Tab and alt-controll-arrows to switch between programs and desktops (it works). How to launch taskbar again? its very strange that reboot didnt help me.

  Read the article

• How to remove icon programatically (Android)

  - by user1865039

  By remove the below intent-filter in AndroidManifest.xml, it can remove the icon after install. <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> But i have try the below when on Boot than remove the Icon, but the icon still remain after reboot. I have add the permission, and this reboot receiver is work. public class BootBroadcastReceiver extends BroadcastReceiver { @Override public void onReceive(Context context, Intent intent) { PackageManager p = context.getApplicationContext().getPackageManager(); ComponentName componentName = new ComponentName("com.example.remove_icon","com.example.remove_icon.LauncherActivity"); p.setComponentEnabledSetting(componentName,PackageManager.COMPONENT_ENABLED_STATE_DISABLED, PackageManager.DONT_KILL_APP); } }

  Read the article

• Xubuntu 13.10 64bit - Slow and buggy "log out" process?

  - by MrKatSwordfish

  I'm a Windows convert who has done only a little bit of dabbling in Ubuntu in the past (back in Dapper Drake a few years back). A lot has changes since then, and I've been yearning to jump back into linux again! So, having just bought a new SSD, I felt that this would be as good of a time as any to set up a dual-boot system again. I've messed around with Ubuntu 13.10 a bit, and while Unity has its issues, I think that it still needs some time to develop. I looked into XFCE and liked it a lot, so I went with Xubuntu. I've installed Xubuntu, and for the most part it's running smoothly and it a pleasure to work with. The customization is great and the minimalistic look and feel is really nice! But here's my problem, whenever I select the "Log Out" option from either the application menu, or the user profiles menu, my PC comes to a crawl, and the dialog box with all the options (shut down, restart, log out, etc.) takes maybe a minute or more to appear. I click the log out button, my PC is brought to a snail's pace, and I have to wait for what seems like an eternity for the logout options to appear! If i try to open something else (even a terminal window) while it's loading the logout options, that other program won't finish loading until the logout screen finally appears. Keep in mind, this is a pretty much vanilla install of Xubuntu 13.10 64bit, on a PC with an intel i7, an SSD, 6gb DDR3 RAM, and a new AMD 7770 gpu (drivers haven't been installed yet, though). Everything else runs fast, most applications open near-instantly! It must be an issue with how the logout options screen initializes or something, but I'm not sure exactly how I can fix it.. Edit - Extra Info: This problem is very consistent when using the "Log Out" buttons in Xubuntu. However, I've found that I'm able to reboot and shutdown much more quickly by going through the "Switch User" screen, and using the reboot or shutdown buttons on that screen. I'm nearly certain that it has something to do with the little Log Out options screen that appears when I select Log Out from the menu, and not the actual process of shutting down.. So what should I do? I really like XFCE so far, and I've never tried a non-ubuntu based distro before, but should I just switch to something else? Is there any known fix for this issue? Are there any work-arounds for logging out/shutting down/rebooting via the terminal so that I can avoid this irritating bug? Is there any that I can monitor the progress of the log out via terminal, allowing me to see which parts are causing the slow-down? What is the best way to report this bug to someone?

  Read the article

• How to Add Proprietary Drivers to Ubuntu 10.04

  - by Matthew Guay

  Does the hardware on your Ubuntu system need proprietary drivers work at peak performance?  Today we take a look how easy version 10.04 makes it to install them. Ubuntu 10.04 finally automatically recognizes and installs drivers for most hardware today, it even recognized and configured Wi-Fi drivers correctly every time in our tests.  This is in contrast to the past, when it was often difficult to get hardware to work in Linux.  However, most video cards still need proprietary drivers from their manufacturer to get full hardware video acceleration. Even though Ubuntu doesn’t include any non-open source components, it still makes it easy to install proprietary drivers if you wish.  When you first install and boot into Ubuntu, you may see a popup informing you that “restricted” drivers are available. You may see a notification asking you if you’d like to install optional drivers from your graphics card manufacturer when you try to enable advanced desktop effects.  Click Enable to directly install the drivers right there. Or, you can select the tray icon from the first popup, and click Install drivers. Alternately, if the tray icon has disappeared, click System, then Administration, and select Hardware Drivers.   This will open a dialog showing all the proprietary drivers available for your system, which may include drivers for your video card and other hardware depending on your computer.  Select the driver you wish to install, and click Activate. Enter your password, and then Ubuntu will download and install the driver without any more input.  After installation you may be prompted to reboot your system. Now, you should be able to take full advantage of your hardware, including fancy desktop effects with hardware acceleration. If you ever wish to remove these drivers, simply re-open the drivers dialog as above, select the driver, and click Remove.  Once again, a reboot may be required to finish the process. Conclusion Ubuntu has definitely made it easier to use Linux on your desktop computer, no matter what hardware you have.  If your video card or other hardware require proprietary drivers, it makes them available and simple to install.  And, best of all, all of your drivers stay updated with your software updates, so you can be sure you’re always running the latest. Similar Articles Productive Geek Tips Adding extra Repositories on UbuntuBackup and Restore Hardware Drivers the Easy Way with Double DriverCopy Windows Drivers From One Machine to AnotherInstalling PHP4 and Apache on UbuntuInstalling PHP5 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows

  Read the article

• Install Ubuntu Netbook Edition with Wubi Installer

  - by Matthew Guay

  Ubuntu is one of the most popular versions of Linux, and their Netbook Remix edition is especially attractive for netbook owners.  Here we’ll look at how you can easily try out Ubuntu on your netbook without a CD/DVD drive. Netbooks, along with the growing number of thin, full powered laptops, lack a CD/DVD drive.  Installing software isn’t much of a problem since most programs, whether free or for-pay, are available for download.  Operating systems, however, are usually installed from a disk.  You can easily install Windows 7 from a flash drive with our tutorial, but installing Ubuntu from a USB flash drive is more complicated.  However, using Wubi, a Windows installer for Ubuntu, you can easily install it directly on your netbook and even uninstall it with only a few clicks. Getting Started Download and run the Wubi installer for Ubuntu (link below).  In the installer, select the drive you where you wish to install Ubuntu, the size of the installation (this is the amount dedicated to Ubuntu; under 20Gb should be fine), language, username, and desired password.  Also, from the Desktop environment menu, select Ubuntu Netbook to install the netbook edition.  Click Install when your settings are correct. Wubi will automatically download the selected version of Ubuntu and install it on your computer. Windows Firewall may ask if you want to unblock Wubi; select your network and click Allow access. The download will take around an hour on broadband, depending on your internet connection speed.  Once the download is completed, it will automatically install to your computer.  If you’d prefer to have everything downloaded before you start the install, download the ISO of Ubuntu Netbook edition (link below) and save it in the same folder as Wubi. Then, when you run Wubi, select the netbook edition as before and click Install.  Wubi will verify that your download is valid, and will then proceed to install from the downloaded ISO.  This install will only take about 10 minutes. Once the install is finished you will be asked to reboot your computer.  Save anything else you’re working on, and then reboot to finish setting up Ubuntu on your netbook. When your computer reboots, select Ubuntu at the boot screen.  Wubi leaves the default OS as Windows 7, so if you don’t select anything it will boot into Windows 7 after a few seconds. Ubuntu will automatically finish the install when you boot into it the first time.  This took about 12 minutes in our test. When the setup is finished, your netbook will reboot one more time.  Remember again to select Ubuntu at the boot screen.  You’ll then see a second boot screen; press your Enter key to select the default.   Ubuntu only took less than a minute to boot in our test.  When you see the login screen, select your name and enter your password you setup in Wubi.  Now you’re ready to start exploring Ubuntu Netbook Remix. Using Ubuntu Netbook Remix Ubuntu Netbook Remix offers a simple, full-screen interface to take the best advantage of netbooks’ small screens.  Pre-installed applications are displayed in the application launcher, and are organized by category.  Click once to open an application. The first screen on the application launcher shows your favorite programs.  If you’d like to add another application to the favorites pane, click the plus sign beside its icon. Your files from Windows are still accessible from Ubuntu Netbook Remix.  From the home screen, select Files & Folders on the left menu, and then click the icon that says something like 100GB Filesystem under the Volumes section. Now you’ll be able to see all of your files from Windows.  Your user files such as documents, music, and pictures should be located in Documents and Settings in a folder with your user name. You can also easily install a variety of free applications via the Software Installer. Connecting to the internet is also easy, as Ubuntu Netbook Remix automatically recognized the WiFi adaptor on our test netbook, a Samsung N150.  To connect to a wireless network, click the wireless icon on the top right of the screen and select the network’s name from the list. And, if you’d like to customize your screen, right-click on the application launcher and select Change desktop background. Choose a background picture you’d like. Now you’ll see it through your application launcher.  Nice! Most applications are opened full-screen.  You can close them by clicking the x on the right of the program’s name. You can also switch to other applications from their icons on the top left.  Open the home screen by clicking the Ubuntu logo in the far left. Changing Boot Options By default, Wubi will leave Windows as the default operating system, and will give you 10 seconds at boot to choose to boot into Ubuntu.  To change this, boot into Windows and enter Advanced system settings in your start menu search. In this dialog, click Settings under Startup and Recovery. From this dialog, you can select the default operating system and the time to display list of operating systems.  You can enter a lower number to make the boot screen appear for less time. And if you’d rather make Ubuntu the default operating system, select it from the drop-down list.   Uninstalling Ubuntu Netbook Remix If you decide you don’t want to keep Ubuntu Netbook Remix on your computer, you can uninstall it just like you uninstall any normal application.  Boot your computer into Windows, open Control Panel, click Uninstall a Program, and enter ubuntu in the search box.  Select it, and click Uninstall. Click Uninstall at the prompt.  Ubuntu uninstalls very quickly, and removes the entry from the bootloader as well, so your computer is just like it was before you installed it.   Conclusion Ubuntu Netbook Remix offers an attractive Linux interface for netbooks.  We enjoyed trying it out, and found it much more user-friendly than most Linux distros.  And with the Wubi installer, you can install it risk-free and try it out on your netbook.  Or, if you’d like to try out another alternate netbook operating system, check out our article on Jolicloud, another new OS for netbooks. Links Download Wubi Installer for Windows Download Ubuntu Netbook Edition Similar Articles Productive Geek Tips Easily Install Ubuntu Linux with Windows Using the Wubi InstallerInstall VMware Tools on Ubuntu Edgy EftHow to install Spotify in Ubuntu 9.10 using WineInstalling PHP5 and Apache on UbuntuInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics

  Read the article

• MacBook Pro 8.2 wifi keeps disconnecting, Ubuntu 12.04

  - by Sean Isley

  I am using a MacBook Pro 8.2 with Ubuntu 12.04, and my wifi disconnects consistently. I followed the directions as detailed here here, however, and it works up to expected speeds, but after within an hours time, the wifi disconnects and the only way to solve the issue is to either reboot OR disable wireless and re-enable it. lsmod | grep cfg80211 outputs: cfg80211 178818 2 b43,mac80211 I suspect that I did not blacklist the correct driver and there are two drivers causing instability, however I have no idea if I actually did it correctly.

  Read the article

• Get more information about the crash

  - by Tito

  when i issue the command last in my terminal i see the following entries i.e. "crash" How can i find out more information about the crash: Is there any system dump file generated or a backtrace file that i can see or analyze. reboot system boot 3.2.0-32-generic Mon Nov 12 23:58 - 09:13 (09:14) tito pts/1 192.168.26.5 Mon Nov 12 23:56 - crash (00:01) tito pts/4 192.168.26.5 Mon Nov 12 22:46 - crash (01:12)

  Read the article

• Having problems booting xubuntu after installation

  - by lagaffenewbe

  I'm newbie with ubuntu, I tried to install ubuntu, at the beginning xubuntu work for the first upgrade to xubuntu 12.04, but after the reboot, no winxp media center ether Xubuntu won't start and I have a screen Ctrl+Alt+Del nothing else. I read a little about, maybe the sata enabled on the bios. What is the problem and can it be fixed or do I have to remove xubuntu. Partition is : 100gb xubuntu 220gb winxp I have an external drive 1 tb Thanks for the help.

  Read the article

• How to install 3d support?

  - by Gonzalo

  I'm trying Natty and after an upgrade I received this message: "Sorry, you don't have 3d support, install it for your graphic hardware to get Unity or please reboot and select 'Classic session' at startup." So I want to install 3D support but I don't know how to. My machine is a Sony Vaio VGN-SR29XN Laptop with Intel Graphics, but I would like to know the general instructions. P.S. : I've no problem with the CLI, I just don't know how to proceed in this particular case (what driver, or program...).

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >