Search Results

Search found 3193 results on 128 pages for 'reboot'.

Page 33/128 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• wrt54gl reboots; troubleshooting steps?

  - by Bill

  I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

  Read the article

• BIOS corrupted? How to proceed? Acer Travelmate 290

  - by dtlussier

  I have a older ACER Travelmate 290 (manufactured in 2002 or 2003), which I recently tried to upgrade to Ubuntu 9.10. After doing the upgrade process it appeared as if I had a problem with my x server configuration, as on the first reboot post-install I heard the Ubuntu startup sound, but had a black screen. I thought I would then reboot again to drop down into text-mode to trouble shoot the x configuration problem. However, when I tried rebooting, something went wrong and since then when I start up the machine I get absolutely nothing except the first hardware check (i.e. HDD light flashes, CD/DVD drive spins, etc.). Other than that the screen remains totally black and I have no HDD or processor activity at all. I have tried restarting it a number of time holding down all kinds of key combinations to try and coax it into the BIOS (if possible) with no luck. I have also tried putting in both a live Linux disc and a Windows install disk without any luck. With a disk in the drive it will spin for a few seconds and then stop. All this has lead me to suspect that the BIOS is somehow corrupt (not sure about the right terminology). I have tried putting a new BIOS image and installer program downloaded from ACER on a USB key to see if it will run when I start up the machine, but no luck. I'm not sure if this method of interacting/updating/flashing the BIOS will work outside of Windows/DOS as both OSs are mentioned kind of ambiguously in the documentation. I have also taken the laptop case apart and inspected the various cards and cannot find any obviously burned out components. I'm not sure how to proceed at this point in terms of components to try, or how to try and load a new BIOS image onto the board. Any advice here would be great, especially from those with experience with this particular line of laptops. Thanks!

  Read the article

• IIS High use & Server Performance issues

  - by HaydnWVN

  Have an SBS2011 running Exchange, a database app and a few other things serving 5 users (3 low use, 1 high). The server was never specced for the database app so it isn't as powerful as I'd like... Only 12GB RAM. We have increasingly found performance problems with this server, last week it was so bad I couldn't even connect remotely. To free up some available RAM I have (over the past month or so): Restricted the Exchange Message Store to 1GB with (so far) no ill effects. Restricted SQL Databases (including SBSMonitoring and Sharepoint/##SSEE (Which isn't used)). Now I am finding that IIS Worker threads are using up the available memory and I have (so far) been unable to track down much useful information about restricting them. This server is not 'serving' anything web-based apart from OWA that I am finding people using because Outlook is so slow (again related to the Servers performance). I am aware that Exchange on SBS2011 is designed to use up available resources (and concede when other applications request). But it is not doing so (or anywhere near fast enough) for our needs. Opening the database application (using Postgres) takes 5+ minutes from client machines and regularly times out or crashes due to this. After a reboot (before SQL/Exchange/IIS databases are very large/totally cached) we get the performace we need and expect. Previously a reboot once a month was enough... Then once a week... Now they have taken to rebooting it almost daily!

  Read the article

• CD-ROM Cant Be Accessed After Installing VMware Tools on VMware Server 2.0.2

  - by Optimal Solutions

  Using VMware Server 2.02, I set up a new VM (Windows XP Pro) applied all of the updates, added Windows addons from the install CD, etc... I got it to a stable point and up through that point I was able to access the CD-ROM drive (E: on my host). What I never did before was install "VMware Tools" and since it claims to give better mouse and video support, I gave it a shot. What it does is it places the install package in a virtual CD-ROM drive. I ran the install, no errors and it wants a reboot. I log back in after reboot and pop in the install CD for Microsoft Office 2003 and I receive the message "Please Insert A Disc Into Drive D:". Drive D: would be the next logical drive after the C: drive where I chose to install the OS. The message box sits there and if I click "Cancel", to return to Windows Explorer, the status bar seems to blink ever 1/2 second - as if its polling for a CD-ROM drive or something. No bangs or exclamations in the Device Manager for any hardware. I had taken a snapshot prior to the VMware Tools install and upon restoring it, the CD-ROM is back. I made copies of two other VMs, installed the VMware Tools on those VMs and both experienced the same issues: Windows 2003 Server and Windows 7 (32-bit). Has anyone seen this issue and know of a fix for this? It would be nice to have the better graphics and better mouse control AND use my CD-ROM drive as well! Thank you.

  Read the article

• running automated fsck on remote server

  - by GriffinHeart

  I had another question about df, and now i came to conclusion i need to run fsck my partition, i've been reading about it and would like some advice, if possible. The situation is like this, no physical access to the server and i want to run fsck. from what i read i just need to touch /forcefsck and when i reboot it will run fsck. My question is, at its basis, with what arguments will the fsck run? Will it need user input to correct errors, etc? and after running will it save a log of what happened? if this was how it ran it would be perfect, anyway of enforcing that on reboot? fsck -v -p /machine/disk/p1 2>&1 > fscklog.txt Also here they describe this: it's also a good idea on debian and debian-derivatives like ubuntu to edit /etc/default/rcS on remote servers and set "FSCKFIX=yes" that adds "-y" to the boot time fsck, so it doesn't risk the remote server being stuck waiting for someone to login at the console and run fsck. But on Centos that doesn't seem to exist I only have ssh access at the moment so that is why i'm being so picky with it. here's some info about disks and mounted volumes on the server: http://pastebin.centos.org/33314 Thanks.

  Read the article

• Windows XP consuming drive letters

  - by billdehaan

  This one's a bit of a stumper. I'm running XP SP3, current with all fixes, etc. My problem is that I can assign a drive letter to a container file (explained below), it works just fine. But once I close the container, the drive letter is no longer available until the next boot. I've got some confidential data that I've placed in a container volume. I've used TrueCrypt (www.truecrypt.com) and FreeOTFE (www.freeotfe.org), with both installed and portable versions for both, with the same result. I open the container file, assign it to a drive letter (say R:), and run some portable apps that are within the volume. When I'm done, I close the container, and the drive letter is released. Fine so far. However, when I attempt to re-open it, the previous drive letter (in this case R:) is no longer available. It's not mapped to anything, it's just unavailable. Even attempting something like "subst R: C:\" returns "Invalid Parameter - R:". I can use the S: drive, no problem, but the next day I have to use T:, then U:, etc. Eventually, I have to reboot to reclaim all of of the drive letters. Unfortunately, everything I've read about drive letters relates to USB assignments, which doesn't apply here. I've tried the "show hidden" command (set devmgr_show_nonpresent_devices=1) with no success. And the Disk Management tool doesn't apply either, since it's not a physical drive. Does anyone know where Windows keeps the list of drive letters? And is there anything short of a reboot that can be used to reset it?

  Read the article

• Live Mesh starts exactly once on fresh Win7 Ultimate installation

  - by Reb.Cabin

  I did a fresh install of Windows 7 Ulimate 64-bit on a formatted drive on a refurbed Lenovo PC, applied all 102 (!) windows updates, windows seems to be working fine. No quirks installing, no apps, no junkware, just straight, legal, Win7 Ultimate right from an unopened 2009 Microsoft box. Ok, breathe sigh -- Install Live Mesh (no messenger, no mail, no writer, no photo, none of the rest of the Windows Live freeware). Set up my shares, let it run overnight. watch MOE.exe in the Task-Manager perf pane to make sure it's all settled down. reboot. Ok, check that MOE is running and files are getting updated properly from other machines in the mesh. Great. HOWEVER -- when I try to launch Windows Live Mesh app from the Start jewel, I get a brief hourglass, then nothing. Reboot. Same story. result -- the shares I already posted seem to be synching properly, but I can't run the app, so I can't add and delete shares. The background process MOE seems to run, but I can't get the app going. btw, the reason I did this fresh install is I had exactly the same experience running Vista, so I wiped the machine hoping it would solve this nasty problem. Imagine my surprise! Will be grateful for clues, advice, etc, please & thanks!

  Read the article

• Mac WLAN 802.11b+g WPA1 connection issues

  - by Peto

  Hi, I have a Telewell TW-EA510v4 ADSL modem+WLAN router configured as follows: Mode: 802.11b+g Security Mode: WPA1 Pre-shared Key WPA Algorithms: TKIP Connections from only certain MAC addresses have been allowed and the MAC address of my Mac is in that list. The WLAN works just fine with iPhone and an old Acer laptop. It has worked for about two months or so with my MacBook Pro (year and a half or so old model). Ocassionally i've had minor problems with it, which have required either reboot of ADSL modem or reboot of my Mac. However now, for the last week or so I haven't been able to connect to it at all. This is what is what i get in the console when i try to connect: 5.5.2010 20.54.53 airportd[73731] Apple80211Associate() failed -3924 (Invalid PMK) 5.5.2010 20.54.53 Apple80211 framework[584] airportd MIG failed (Associate Event) = -3924 (Invalid PMK) (port = 104599) 5.5.2010 20.54.53 SystemUIServer[584] Error joining WLAN-M: Invalid password (-3924 Invalid master key) The pre-shared key I use is not incorrect. I'm 100% sure of that. The Error Log from the router only says this when I try to connect to it: May 05 21:09:54 home.gateway:i802_1x:none: <my mac address> associated May 05 21:10:00 home.gateway:i802_1x:none: <my mac address> disassociated May 05 21:10:01 home.gateway:i802_1x:none: <my mac address> disassociated Any ideas or tips to troubleshoot this further?

  Read the article

• What does a status of "Backup" mean for Windows 7 local user profiles?

  - by Howiecamp

  Summary: Upon logging on to Windows 7 RTM I get a message that my profile can't be loaded and a temporary user profile is created. I logged off and back on as Administrator. The user profiles dialog shows my user profile with a Type of "Local" and a Status of "Backup" rather than "Local" which it should be. How can I change this to make my user profile accessible? The long story: My PC has a single hard drive partitioned into a C: and a D:. I'd moved my user profile directory (c:\Users) to d:\Users, removed c:\Users and then used mklink.exe to create a directory symbolic link c:\Users -- d:\Users. Worked like a charm since I did it. Today, I make a System Restore Point for drives C: and D:. Next, I dismounted D: and used the Disk Management tool to remove the "D:" drive letter from the D volume. (My plan was to reboot and then redirect the symbolic link.) Upon reboot, I got the user profile error described above. Finally, I restored the System Restore Points that I'd created for both drives and then rebooted again. Same issue.

  Read the article

• Vista gets stuck in an endless loop while booting

  - by Mason Wheeler

  I put my laptop to sleep last night, and when I woke up this morning... it didn't. So I tried to reboot, and everything went fine until it got to the Vista splash screen, where it's supposed to display the logon. Here, it hits an endless loop: Display the cursor with the blue spinny thing that replaced the hourglass, for 5-10 seconds Display "Please wait..." for about half a second Screen flashes to black, then quickly back to the Vista splash screen Goto step 1 The whole time, my hard LED is on almost non-stop. I can boot into Safe Mode... sometimes. Sometimes it'll load all the drivers, then sit there for about 10 minutes, spinning the hard drive non-stop, then reboot with no warning. I tried booting to Last Known Good Configuration. Didn't fix anything. When I've managed to get into Safe Mode, I tried running CHKDSK. Didn't fix anything. I tried running System Restore to each of my last two restore points. Didn't fix anything either time. I ran a virus scan. Didn't find anything. I tried calling the manufacturer (Alienware), only to discover that my warranty expired last freaking week and now I can't get it fixed without paying exorbitant sums of money. I'm about at my wits' end here. Has anyone seen this problem before? Does anyone know how to fix it? Does anyone know a solution that does not involve reinstalling the OS and losing an entire year's worth of program installations, Windows Updates and configuring and tweaking things until it's working just like I want it to?

  Read the article

• Flushing iptables broke my pipe, how can I save my instance?

  - by Niels

  I was setting up my iptables when I performed a iptables -F and my ssh pipe broke. This is the last output of my session: root@alfapaints:~# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW,ESTABLISHED tcp dpt:2222 ACCEPT tcp -- li465-68.members.linode.com anywhere state NEW,ESTABLISHED tcp dpt:nrpe ACCEPT tcp -- anywhere anywhere tcp dpt:9200 state NEW,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:http state NEW,ESTABLISHED ACCEPT udp -- anywhere anywhere udp spt:domain Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:2222 ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:nrpe ACCEPT tcp -- anywhere anywhere tcp spt:9200 state ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp spt:http state ESTABLISHED ACCEPT udp -- anywhere anywhere udp dpt:domain root@alfapaints:~# iptables -F Write failed: Broken pipe I tested my connection just before and I was able to connect with ssh. Now I did a nmap scan and not a single port is open anymore. I know my VPS is running on VMWare ESXi, could a reboot help? Or if not could I attach and mount the disk to another vm to save the data? Does anybody have some advise? And maybe an explanation what happend or what could have cause my pipe to break? ps: I didn't save my rules on the config directories of iptables. But used a file I stored in ~/rules.config to apply my rules like this: iptables-restore < rules.config So probably a reboot would help? Thanks a lot in advance.

  Read the article

• Use Mac OS X Server As Development Environment

  - by macinjosh

  I've installed Mac OS X Server 10.6.3 on my laptop to use as my normal OS. I do a lot of web development and thought it would be handy to run OS X Server so I could more easily manage my local development environment (Apache Virtual Hosts, Hostnames for each local site, etc). I'm really enjoying the new setup except for one problem. DNS. My ideal situation would be to add a site (some-site.local) in the Web Service and then go to the DNS Service and add a primary record for the new site. I actually got this working at one point but after a reboot it stopped working! The records look the same as they did before the reboot but the site doesn't come up in Safari. Here is a list of my needs: Need to be able to add new domains at a whim Domains always map to a site on the same box's Web Service Local & External IPs often change It would nice if it worked on any network (i.e. WiFi at the airport or coffee shop) Sites only need to be accessible locally Configuration should stay put even after rebooting I've done some googling and used this as a bit of guide. In the past I've used MAMP and then just a local Apache/PHP/MySQL install with a manually managed hosts file. I'd rather not go back.

  Read the article

• Can I have damaged a CPU ?

  - by Pascal

  Hey guys, This is a question I asked on Anantech forums, but I just discovered this community and think this question would fit right in. Here goes: I built a PC around a Q9550 1 1/2 years ago (MoBo is an Asus P5Q deluxe). Specs give 2.83GHz, OC'ed it to 3.40 GHZ without any problem (or so I thought) till 2 months ago. Cooling is provided by stock Intel Fan... 2 Months ago, I began to see random crashes, bios saying CPU overheat error... PC would reboot at OC'ed speed without any problem. Since last saturday and a few more crashes, PC won't reboot at 3.40 GHz, and even at stock speed (2.83 GHz), I got core temperatures of (60 C idle, 95 C under load) on the first two cores. This is the 4 core temperatures I am talking about, not the T-CPU which obvioulsy is lower. Fan is running at a steady 2000 RPM. Questions for you : 1. Is 2000 RPM the normal speed of the Intel fan or is my fan somehow broken (which could explain the overheating). In this case, any recommendation for a good fan for OCing ? 2. Hypothesis I fear is the right one: can the CPU have been slowly damaged over time by this OCing, meaning there is nothing much to do except waiting for it to die ? (As a side note, I am surprised that the 9550 is still around 300 $CDN here... Thought it would have been cheaper with all those i3/i5/i7 around). Any help or advice would be more than welcome...

  Read the article

• Windows Service with Logon a user

  - by David.Chu.ca

  I have a service running in a box with Windows XP and a box of Server (2003). There is one service running in autmactic mode. If I set the log on with a local user, the service will stop running if the user logs off the account from the Windows? In other words, in order to keep the service running, have I to keep the user as login mode? I understand that the service can be set as local system which will not need any one to login as long as the box is powered on. However, the service I need to run has to be running as a local user with the required permissions. The problem I have right now is that the box may reboot itself. If that happens, no one is logged in yet until some one has to log in as the required user. I want to make sure if the required user has to be as a log on user first. If that's the case, any suggestion to deal with unexpected reboot issue?

  Read the article

• How to recover a Linksys WRT54GL router that has a blinking green power LED and no response from the

  - by Peter Mounce

  I was flashing the router with the Tomato firmware, but something went wrong; I'm not sure what. Now, the router responds to ping at 192.168.1.1 (my Mac's on a static IP 192.168.1.21), but the web-interface doesn't come up. I have read that this situation is recoverable in a [couple of places][2], but I haven't been having much success and so I wondered whether anyone could help. From my Mac (OSX 10.5) I have tried to tftp a new vanilla-Linksys firmware to the router and reboot; according to the trace, this sends it but the router behaves no differently after a reboot. I've read that if boot_wait is turned on, I'll have an easier time, but I haven't been able to find any instructions that tell me how I can tell whether I did this or not (I don't think I have, but I might have, when I tinkered the first time months ago - the router has worked since then, though). I have found a couple of references to [something called JTAG][3], which seems like some kind of [homebrew diagnostic cable thing][4], but that's a little beyond my ken. Happy to try it, with muppet-level instructions, though (I do software, not hardware!). So, I'm at a bit of a loss, really, and wondered whether anyone could provide me with the route (ha. ha.) out of this mess? Hm, I can't post all the links I wanted to until I have some more reputation.

  Read the article

• bond0 and xen = crash

  - by Rajat

  Bonding with xen 1 - Stop all guests. Reboot dom0 after running "chkconfig xend off" and "chkconfig xendomains off". 2 - Configure bond0 by enslaving eth0 and eth1 to it. I added the below two entries to /etc/modprobe.conf. alias bond0 bonding options bond0 mode=6,miimon=100 Content of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-bond0 DEVICE=bond0 IPADDR= NETMASK= ONBOOT=yes BOOTPROTO=static USERCTL=no Did "modprobe bond0" and "service network restart" after that. 3 - Edit /etc/xen/xend-config.sxp Change (network-script network-bridge) To (network-script 'network-bridge netdev=bond0') 4 - Start xend. "service xend start". 5 - chkconfig xend on. 6 - modprode bond0 7 - more /proc/net/bonding/bond0 8 - Create guest images as usual and bridge it to xenbr0. about config i did for my xen kernel rhel 5.3 after i reboot the host server i get in place bond0 get pbond0 and its get disconnect from network only i ping to my vm's on the host server any one have any idea why xen bond0 is acting like that or what is solutions to come out of pbond0 to bond0.

  Read the article

• Xen domU passwd file overwritten with console log output

  - by malfy

  I was setting up a Debian Xen domU and after booting it fine, I added basic configuration to /etc/network/interfaces and ran /etc/init.d/networking restart. This failed so I decided to reboot. After the reboot I also ran xm shutdown box. When dropped to a shell prompt it wouldn't let me login. Upon further inspection, I now have garbage in some critical files in /etc: root@box:/# tail +1 mnt/etc/{passwd-,shadow} tail: cannot open `+1' for reading: No such file or directory ==> mnt/etc/passwd- <== 0000000000100000 (reserved) Nov 23 02:02:39 box kernel: [ 0.000000] Xen: 0000000000100000 - 0000000004000000 (usable) Nov 23 02:02:39 box kernel: [ 0.000000] DMI not present or invalid. Nov 23 02:02:39 box kernel: [ 0.000000] last_pfn = 0x4000 max_arch_pfn = 0x1000000 Nov 23 02:02:39 box kernel: [ 0.000000] initial memory mapped : 0 - 033ff000 Nov 23 02:02:39 box kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000004000000 Nov 23 02:02:39 box kernel: [ 0.000000] NX (Execute Disable) protection: active Nov 23 02:02:39 box kernel: [ 0.000000] 0000000000 - 0004000000 page 4k Nov 23 02:02:39 box kernel: [ 0.000000] kernel direct mapping tables up to 4000000 @ 7000-2c000 Nov 23 02:02:3 ==> mnt/etc/shadow <== 32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 Nov 23 02:02:39 box kernel: [ 0.000000] PERCPU: Embedded 15 pages/cpu @c15b0000 s37688 r0 d23752 u65536 Nov 23 02:02:39 box kernel: [ 0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096 Nov 23 02:02:39 box kernel: [ 0.000000] pcpu-alloc: [0] 0 Nov 23 02:02:39 box kernel: [ 0.000000] Xen: using vcpu_info placement Nov 23 02:02:39 box kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16160 Nov 23 02:02:39 box kernel: [ 0.000000] Kernel command line: root=/dev/mapper/xen-guest_root ro quiet root=/dev/xvda1 ro Nov 23 02:02:39 box kernel: [ 0.000000] PID hash table entries: The garbage is also present in the passwd file and the group file (although I didn't paste that above since I have since ran debootstrap on the filesystem again). Does anyone have any insight into what happened and why?

  Read the article

• How to fix Quicktime video color problems on nVidia chipset and Windows XP?

  - by Matthew Glidden

  My laptop frequently plays video as if in very low-color mode. Though the sound remains clear, it looks terrible, showing only a few shades of red, blue, or yellow. (It's even worse than 8-bit color.) The problem doesn't happen consistently, so I'm looking for troubleshooting advice or known solutions. I use a Dell Latitude D620 laptop with Windows XP, on-board nVidia video chipset, Quicktime, and multiple monitors (laptop screen + VGA-connected LCD). Color problems happen in each application I tried, iTunes, a browser, and the Quicktime standalone player. It doesn't happen right after reboot, so could be from a sleep-wake cycle, or at least being on for an extended period. Google results suggest reinstalling nVidia drivers, which I've done several times with no change. I have found 2 workarounds. Reboot, sacrificing significant time and disrupting work In nVidia control panel, change color to 16-bit, and then back to 32-bit This happens with all video playback, so it's definitely not one corrupt file. I use workaround #2 consistently, but would love a longer-term solution.

  Read the article

• Why do my Xcode default font starts to look ugly after some time, until I restart?

  - by mystify

  I plugged in an external monitor. All resolutions match perfectly. MacBookPro LCD is closed. After restarting Xcode editor fonts look very bad. Only in Xcode. When I restart the mac and DON'T use an external monitor, fonts look all right again. When I attach the monitor and close the LCD of the MacBookPro, fonts look nice. Then I close Xcode and reopen it: Fonts suck. Only way to get fonts look good is to disconnect external monitor and reboot, then reconnect external monitor, close LCD, wait, hit any key and let the external monitor be the only one. Fonts look nice - until I restart Xcode. I think it happens any time Xcode is launched with external monitor attached and ugly fonts survive until reboot. Unplugging external monitor and restarting Xcode doesn't help. It seems like Xcode isn't antialiasing them properly after something happens. Is there a fix for this problem? EDIT: After trying a few more times, it seems it is possible to get fonts to look nice by disconnecting external monitor and reopening xcode. Here are some little snapshots: GOOD FONT: UGLY FONT: You can see how dirty the ugly font looks. It's very hard to read and hurts in the eyes. Believe me. It sucks. Sometimes the little "i" are almost invisible. I make use of the very eye-friendly Dusk style of Xcode (go to preferences and choose that, if you haven't already. A real pleasure for your eyes)

  Read the article

• My Boot order changed. Why?

  - by Chris

  I have a laptop running Windows XP SP3 with one internal hard drive partitioned into C: (system), D: (storage) and I have an external hard drive, F: (external drive). Yesterday the machine was running fine. Today, I go back to it and see that it's just showing a blinking cursor. Checked through the BIOS and the hard drive checked out fine. CTRL-ALT-DELETED the machine a few times, but I was never able to boot back into the operating system. I threw in a live CD and found out that the boot order of the drives has changed. The external drive is now C:, the system partiton is D:, and the storage partition is E:. Does anyone have any idea of how or why this would have occured? Auto system updates are turned off so there should have been no automatic reboot of the system overnight, and anti-virius runs on the machine and has found no infections before this occured. Edit When I was looking through the BIOS of the machine, I did see that the boot order was changed. But still the same question remains, what would have caused this to happen? I can't believe that a random reboot happened and totally changed my hard drive setup.

  Read the article

• Why does hiberfil.sys come back from the dead on Windows 7?

  - by Corey White

  I have Windows 7 running on a small (40GB) partition, with 4GB ram. This means that the hiberfil.sys file created by Hibernate takes up a significant portion of the available diskspace. I would like to remove it. I am aware that I can disable Hibernate and remove hiberfil.sys by entering powercfg -h off in an elevated command prompt. This works -- the file is immediately removed, and after doing so, the HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Power\HibernateEnabled key is (correctly) set to 0. However, the next time I reboot the PC, hiberfil.sys returns from the dead, Hibernate is reenabled, and that registry key has returned to 1. I'm pretty much at my wits' end with this. Almost everything I can find online related to removing the hiberfil.sys file simply suggests using powercfg to turn off hibernation, and that appears to work for just about everyone. But it just keeps coming back for me! (Like a vampire, sucking up my disk space.) I did find one other thread from someone who seems to have had the same issue, but none of the suggestions there worked for the original poster (or for me). Still, I have tried everything listed there, including: Disabling hybrid sleep Disabling Hibernate through the command prompt, through the Power Options GUI, and through both (in both orders) Manually changing the HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Power\HibernateEnabled key Pretty much everything else I can think of! I do want to reiterate that I have no problem removing the file -- that works great. It just comes back after every reboot. I'm about ready to throw in the towel and just run a script on login to disable Hibernate each time, even though that seems like a crazily hacky "solution" . . . but I was hoping someone here could suggest something else, first. Thanks!

  Read the article

• Ubuntu Laptop as a wireless hotspot on bridge mode

  - by nixnotwin

  I have a wired router to which my ubuntu laptop connects via ethernet. The wierless NIC of the laptop acts as a wireless hotspot on master mode. I use hostapd fo this. I have bridged eth0 and wlan0, so my wireless clients that connect to my laptop over wifi get ip from the wired router via dhcp, so the devices get registered at the wired router ( and the laptop is just an access point). I use the following commands to get my laptop+accesspoint working: sudo brctl addbr br0 sudo brctl addif br0 eth0 sudo hostapd /etc/hostapd/hostapd.conf & sudo dhclient -d br0 & sudo ifconfig wlan0 192.168.1.15 netmask 255.255.255.0 up sudo brctl addif br0 wlan0 These commands enable me to access internet on my wireless clients and also on the laptop which is acting as wireless accesspoint. But if I reboot the wired router (without rebooting the laptop that is acting as accesspoint), Internet access on the laptop+accesspoint gets lost, but on wireless clients it works fine. Even I have not been able to figure out a command which will reset the laptop interfaces to default settings, so everytime the router reboots, I have to reboot the laptop too to get into default settings so that I can re-enter the above mentioned commands. My first question is How can I have my bridge+accesspoint up and running even-though the router reboots? And is there a command to set the interfaces to a default state? (ifdown -a doesn't work, after issuing the command the bridge still remained).

  Read the article

• Ubuntu Laptop as a wireless hotspot on bridge mode

  - by nixnotwin

  I have a wired router to which my ubuntu laptop connects via ethernet. The wierless NIC of the laptop acts as a wireless hotspot on master mode. I use hostapd fo this. I have bridged eth0 and wlan0, so my wireless clients that connect to my laptop over wifi get ip from the wired router via dhcp, so the devices get registered at the wired router ( and the laptop is just an access point). I use the following commands to get my laptop+accesspoint working: sudo brctl addbr br0 sudo brctl addif br0 eth0 sudo hostapd /etc/hostapd/hostapd.conf & sudo dhclient -d br0 & sudo ifconfig wlan0 192.168.1.15 netmask 255.255.255.0 up sudo brctl addif br0 wlan0 These commands enable me to access internet on my wireless clients and also on the laptop which is acting as wireless accesspoint. But if I reboot the wired router (without rebooting the laptop that is acting as accesspoint), Internet access on the laptop+accesspoint gets lost, but on wireless clients it works fine. Even I have not been able to figure out a command which will reset the laptop interfaces to default settings, so everytime the router reboots, I have to reboot the laptop too to get into default settings so that I can re-enter the above mentioned commands. My first question is How can I have my bridge+accesspoint up and running even-though the router reboots? And is there a command to set the interfaces to a default state? (ifdown -a doesn't work, after issuing the command the bridge still remained).

  Read the article

• Logitech QuickCam Pro 9000 & Windows 7 64-bit failing miserably

  - by Saxtus

  I am trying to install a Logitech QuickCam Pro 9000 webcam to Windows 7 64-bit. If I do it without using the Logitech drivers but instead the Windows Update ones, the camera works with low frame rate and without face tracking and all other bells and whistles that it's full driver provides. The moment I install the latest official Logitech driver, the problems begin: Camera works fine, until I decide to go to audio settings of the LWS panel or Windows'. Then LWS freezes and with it everything that tries to output audio. I am not able to open Playback/Recording devices window (it just doesn't appear) and system gets unstable and slow with LWS.EXE process not been able to close forcefully. If I reboot and forget the camera connected, this situation continues and system gets unstable from the beginning. If I reboot without the camera connected, everything works fine until I connect it and try to do something with audio settings of Windows or LWS panel. I should note, that until the freezing occurs, camera works as expected, with full frame rate, face tracking and everything that is expected to do. The soundcard is the ASUS SupremeFX II of the ASUS Striker II Extreme motherboard. Any ideas of what is causing this or what else to try so I can make it work as advertised? Thank you.

  Read the article

• What steps should I take to debug this non-starting hvm virtual machine?

  - by Ophidian

  I have a dom0 machine running CentOS 5.4 with all the latest updates using Xen as my hypervisor. I am using Xen in part because this machine was set up prior to KVM being included in RHEL, and in part because KVM's network bridging configuration is not nearly as simple as Xen's. The dom0 machine is headless and I do all of my VM management via virsh from the command line. I have two hvm domU's: A web server running CentOS 5.4 A mail server running Gentoo Both VM's are backed by LV's on the dom0 but do not use LVM in the domU. Both have virtually identical libvirt configurations (differing by expected things like name, UUID, NIC MAC, VNC port, etc). The web server domU (WSdomU hereafter) does not start since applying the most recent kernel update (kernel-xen-2.6.18-164.15.1.el5.x86_64 and kernel-2.6.18-164.15.1.el5.x86_64 for the dom0 and WSdomU respectively). By 'not start' I mean it appears to be running but it does not use an CPU cycles, does not bring up a graphical console, and does not respond on the network. The WSdomU is listed as no state rather than the normal running or blocked in xentop. The mail server domU starts fine and functions normally. Here are the steps I have taken so far that did not solve the problem: Reboot the dom0 to see if things come up on their own Check xen dmesg on dom0 Check xend logs (a cursory viewing did not show anything blatant; specific suggestions of things to look for would be appreciated) Attempted to connect to the WSdomU's graphical (VNC) console from the dom0 Shutdown the mail server domU and attempt to start the WSdomU Check the SELinux labels on backing LV's (they're the same) Set SELinux to permissive and attempt to start the WSdomU Use virsh edit to try tweaking the WSdomU config virsh undefine, reboot, virsh define the WSdomU config dd the WSdomU LV to an .img file, copy it to my Fedora desktop and run it under KVM (works fine) What steps should I take next to debug this? I will edit in any additional configuration's requested in the comments.

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >