Search Results

Search found 3061 results on 123 pages for 'sata hdd'.

Page 29/123 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

  • Switch new hard drive with old hard drive (containing files)

    - by jeffmangum
    So my old pc is dead. I took off the HDD cause my files are in there. I have this new pc but the hdd is only 80gb. There are no important files in there so i can just throw it away. I want to switch it with my old HDD. But: I cant just plug in the old hdd to my new pc right? If not, how can i switch to that old hdd without losing my files? Will there be risk for my new pc when I plug in that old HDD (i mean i dont want to have 2 dead PCs) (My first plan was actually just adding the old HDD but my pc doesnt have room left for that.)

    Read the article

  • How much does HDD cache matter with Linux softraid?

    - by Jawa
    I'm in a process of renewing/expanding my disk sets, but not quite sure what kind of disks to get, cache-wise. What difference does disk cache amount of 16/32/64MB do, in capacities of, say, 1/1.5/2TB SATA disks? The disks will be used in a webapp server and in a media workstation, with Linux's softraid in raid-1/raid-5 configurations. Note, that as both purposes are purely for a hobby, the pricetag for a dozen of disks is a big issue.

    Read the article

  • Why can't I boot from portable HD?

    - by user11239
    I've been trying to get Ubuntu 10.04-LTS 32-bit desktop installed onto a 250GB FreeAgent Go drive from Seagate. I've been able to install onto a USB flash drive and boot successfully from this. I have installed Ubuntu onto the jump drive using Universal USB Installer, and this was a total success in terms of getting Ubuntu to run off a flash drive. I was unable to accomplish this with the portable HDD. I then, following instructions, attempted to install the OS onto the HDD once booted up from the flash drive. After installing the OS on the HDD, the computer would simply not load the OS when the HDD medium was selected for booting from. However, as there is no System-> Preferences-> Removable Drives and Media I could not complete this step. Is this vital? How do I do this under Ubuntu 10.04? I have formmated the MBR on the HDD and repeated the above, still with no success. I have also browsed some forums that mention there may be something related to spin-up speeds, but nothing explained in detail the issue or how to solve it, and I'm not familiar enough with system booting to understand if this could be an issue. Basically, what I'm trying to do is get Ubuntu to boot off the HDD, I've attempted several things, and the result is, after selecting the HDD from BIOS, the OS never starts booting (after waiting upwards of ten minutes). I just have a white cursor blinking. I can always get it to boot from the jump drive. Related question

    Read the article

  • How do I migrate web files from a Plesk 8 installation (on a slaved HDD) to a Plesk 10.4.4 installation?

    - by Ranger
    Due to Plesk 8 being at End of Support our host setup a new installation of RHEL and Plesk 10 on a new hard drive. They then slaved the old drive to the new so that we could migrate all our files using SSH. I am having challenges correctly migrating the sub domain files. The path to subdomain root folder in Plesk 10.4.4 is confusing as I don't know where to copy the files to. The path to the files on the slaved drive is: "/mnt/old-drive/var/www/vhosts/domain_name.com/subdomains/SUBDOMAIN_NAME/", meanwhile on the new installation I have "/var/www/vhosts/SUBDOMAIN_NAME.domain_name.com". There is an httpdocs folder in the '/var/www/vhosts/domain_name' folder but none in the '/var/www/vhosts/SUBDOMAIN_NAME.domain_name.com' folder. Where do I copy my subdomain files to? Please help.

    Read the article

  • Ubuntu made my second HDD disappear from the BIOS!

    - by RWLarsen
    My netbook, an ASUS 1015PX, shipped with two harddrives. After switching to Ubuntu, the second drive isn't recognized by the OS or the BIOS. I've never formatted the second drive, so it's still set up for use by Windows. I guess I don't care about the data on the drive, I'd just like to be able to use it again. It's probably also worth mentioning that I'm very new to any form of Linux, so I'm remarkably new to the Terminal.

    Read the article

  • Ubuntu in USB.. Boot from fixed HDD?

    - by Z9iT
    I am having Ubuntu 12.04 minimal installed on my USB pen-drive; which I use on several systems as portable OS. I was thinking to edit the boot parameters so that before the main Ubuntu OS is loaded, it shows an option to Boot from Hard Drive for 5 seconds, and then boots to Ubuntu. This way i'll be able to have an option to boot to the OS installed on the Hard-Drive, without removing or unplugging my ubuntu USB stick. How do I edit the boot parameters to achieve this?

    Read the article

  • How to get my windows docs ; pics, mp3, and docs off an external usb hard drive (sata 3.5 enclosure)

    - by Alan
    Back when I had windows 7, I cloned my internal hard drive to an enclosed external usb hard drive. I then formatted my internal hard drive and installed ubuntu 11.10 as my only OS. How do I migrate my files, pics, mp3's, and etc off the external drive and back to my internal drive which now only has ubuntu on it. (and why is this process not made easier?) I have tried logging in as the root user but I cannot find the external device. I have downloaded several different apps to manage files, usb sticks and etc. PLEASE HELP!!!

    Read the article

  • How to resize(increase) a root+home cloned partition from a smaller hdd?

    - by saulo
    Here is my story: I had a hd failing so I cloned it with dd to larger 500gb hd. It seemed to have worked well, but I have all this unallocated free space at the end of the disk (230gb). I tried to used gparted from a liveUSB to allocate all this space to my root+home partition (other than that I only have a small extended partition with the swap). It won't let me do this. I can only create another partition, or allocate the free space to the extend partition. I can however reduce the size of the root+home partition since I wasn't using all the space Is there a way to put this free space to my root+home partition after all? Or do I have to go with another partition. If so I'd like to separate my home from the root, reduce the root partition and create a ext4 logical home partition. What would be the best safest way to do this? Thanks so much in advance, aloha

    Read the article

  • What disk image should I use with VirtualBox, VDI, VMDK, VHD or HDD?

    - by Sorin Sbarnea
    Latest versions of VirtualBox supports several formats for virtual disks, but they forgot to provide a comparison between them. VDI VMDK VHD HDD Now, I am interested about a recommendation or comparison that considers the following: be able to use dynamic sizing be able to have snapshots be able to move my virtual machine to another OS or even another free virtualization solution with minimal effort (probably something that would run fine on Ubuntu). performance

    Read the article

  • HDD,CD,DVD - how is sector id distinguishable from data?

    - by b-gen-jack-o-neill
    Hi, as titles says, how is sector id on HDD,CD-ROM and so distinguishable from data? I mean, when I want lets say sector #52, first, head goes to track where this sector should be, than it must wait some time to spin the desired sector above the reading head. But it must somehow recognize that its sector number, and not only data that say 52. So, how is this done? Thanks.

    Read the article

  • Very slow write access to SSD disks on some Asus P8Z77 motherboards

    - by lenik
    I have Asus P8Z77-V LK motherboard, that ran Mint 13 (based on Ubuntu 12.04) just perfectly, but recently I've tried to install Mint 17 and noticed abysmal write performance. Write speed on SSD disk was about 1.5MB/sec, when it's supposed to be in 150-250MB/sec range. For write testing I've used dd if=/dev/zero of=/dev/sda bs=10M count=10 while booted up from LiveCD. I have also tested the read speed with hdparm -tT /dev/sda and got about 440MB/sec -- that's normal. I can tell, the read performance has not degraded at all and is not an issue here. Since I had a few different SSD disks and few motherboards, I've tested and tested and here are results: Asus P8H77 works fine with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V LK works with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V PRO works with Mint13, and works just fine with Mint14, 15, 16 and 17. The only difference between "PRO" version and others is that it has extra SATA controller onboard (in addition to the Z77 chipset SATA controller) providing extra 2 SATA ports. SSD disks work fine with "PRO" version when connected to the native SATA ports as well as to the ports provided by extra SATA controller, so this does not look like a hardware issue. As far as I can tell, there's something changed in the kernel while going from 3.2 to 3.5, that affects the detection of onboard SATA controller for Asus P8*77 motherboards, that screws up the write speed for SSD drives. Could anyone shed some light on how to fix this issue or, possibly, give a pointer to a more suitable place to ask this question?

    Read the article

  • Lenovo Windows 8 EFI restore from image

    - by anderhil
    First time here. I have bought e530 with windows 8 and the first hour of work with it i have a problem. I have ssd with windows 7 which i want to use with my new e530. I have made a sysprep of win 7 and installed ssd to the e530. The HDD which was inside e530 i want to use as second hdd instead of my DVD Drive. I connected this HDD through usb-to-sata adapter to copy some files from ssd to the hdd. Unfortunately it didn't see the file system on the HDD (but first time i have booted to it and first boot into Windows 8) I've made some mistakes and i corrupt the filesystem on the hdd. I tried bunch of tricks to recover the GPT, but it didn't work. I have managed to recover the Lenovo_Recovery partition to my ssd using recovery tools. And now I'm stuck, with this new things to me - EFI, GPT, etc i don't how this stuff works, and i have been trying to understand this for hours - but nothing seems to work. I want to restore the Windows 8 to the hdd, so it is there alive. What i have done so far: Formated the HDD I took the PBRALL file from the Lenovo_Recovery " convert gpt create partition Primary size=1000 ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=W format quick LABEL=WINRE_DRV create partition efi size=260 assign letter=s format quick fs=fat32 LABEL=SYSTEM_DRV create par msr size=128 create partition primary noerr assign letter=t format quick LABEL=Windows8_OS shrink desired=12197 create partition Primary ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=q format quick LABEL=Lenovo_Recovery " it recreated the partitions copied contents of SDRIVE.zip to SYSTEM_DRV partition copied contents of WDRIVE.zip to WINRE_DRV partition Copied restored Lenovo_Recovery back to Lenovo_Recovery partition So now I have 3 system partitions: SYSTE_DRV BOOT boot.sdi EFI BOOT bootx64.efi LenovoBT.efi Lenovo ... Microsoft ... WINRE_DRV\Recovery\WindowsRE\winre.wim Lenovo_Recovery (whic contains install.wim and bunch of other things) So i put back the HDD inside the laptop and tried to boot - but nothing works. It just doesn't boot to anything - no errors - nothing at all. When I choose this HDD manually for boot - just black screen blinks and that's all - it returns back to the devices boot menu. SYSTEM_DRV is EFI partition, so I don't understand why it doesn't boot, it has files needed inside. Can anybody tell me what should be done to make it boot to recovery console or smth like that? How to restore the Windows 8 from the Lenovo_Recovery install.wim image? As I understand I have all the files where they should be, but why it doesn't work? How to troubleshoot such things? Also, if somebody has good link where EFI booting process is explained in details that would be great. Cause i still don't understand how it knows what partition to boot?

    Read the article

  • 11g R2 RAC Expert ????????? ~?????????~

    - by user763243
    ??????????????????????????????????????????????????????????????????????··· ??1??????????HDD????????????????????????????????????????????????HDD?????????????????????5?????DVD???????????????(???????????????????? ?)?????????????? IT????????????????????RAID????????????????????????????????????????HDD?????????????????????????????????????????????????????????????HDD???????????????????6????1?8?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????···orz ???RAC?????????????????????????·?????????????????????????????????????????????iPhone????????????????????WiFi??????????????????????????????????????????????????????????????????????? ??????????????????????????????????3G??????????????????????????????????????????????????????? ???????????????????????????????????????????PDF??????????????????????????????????????????????????????????????????????????????(????????????)???????????????????????????????????????????????????PDF?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????????????????????????iPhone???????????????????????????????????????????????????????????????????????? ??????????????????????????????????????????????????????????????????????????????????????????????????(??)????????????????????

    Read the article

  • Linux: How to delay hddtemp service start at boot until all hdd are visible?

    - by Atis
    I live in a hot and humid environment, therefore I monitor the hdd temperature using hddtemp and gkrellm. There is an LSI9211 8i sata/sas controller in my computer. I have drives connected to both my motherboard and the LSI. hddtemp monitors only the drives directly connected to my motherboard after booting the system, therefore gkrellm displays the temperature of those drvies only. Logging in and restarting hddtemp before starting gkrellm fixes my issue, i.e. drives connected to the LSI controller are also visible. It seems that the drives connected to the LSI controller become visible only after hddtemp is started in the boot sequence. I think delaying it would help. How can I delay the starting of hddtemp till all drives are visible? I prefer a way to check if drives are visible to the delay of a specific amount of seconds.

    Read the article

  • What SATA drive should I install FreeBSD onto? i.e. ar0 vs da0 vs ad4/5

    - by Matt
    I'm installing FreeBSD 8.0 on a server that has hardware SATA Raid. I'm just wondering. What is the difference between these devices. i.e. ar0, da0, ad4, ad5 I take it that ad4 & 5 are my two disks. Somehow the OS can see them individually even though it's one logical mirrored drive. Should I be installing it onto ar0 or one of the adX disks. What is da0? it's smaller than the others. ar0 is not some kind of software raid device is it? Just want to make sure I don't mess this up right from the get go.

    Read the article

  • I suspect that my HDD is causing hardlocks, as all other components have been replaced. How can I check this theory and solve the potential cause?

    - by user867814
    I have had this problem over quite a while now, thorough multiple Linux kernel versions and distributions, as well as replacement of all components, aside from my main HDD - RAM, GPU(twice), mother board, CPU, power supply. What happens is, at one point during the operation of the PC, it will hardlock - everything stops working, external HDD is not shut down correctly and continues to spin until I plug it out and in, there are no system/kernel logs of any kind, and no otherwise nothing that would suggest a cause. Another reason for my suspicion is that the failures happen almost exclusively during HDD read/write activity - shutdown(happens nearly 1/3 of the time so far, it's only been few days though), launching programs, and once during operation of apt. I hope the post is descriptive enough, if you need any additional info, ask(and tell me how to prepare/obtain it), and I will provide. If I'm wrong, point me in the right direction. Thanks in advance.

    Read the article

  • Resetting "HDD Warning???" with Zalman ZM-VE400 external case

    - by 0xC0000022L
    Whenever I turn on (or plug in) the Zalman ZM-VE400 I have, it shows HDD Warning???. Sometimes briefly, sometimes until the Menu button is pressed. The case contains a SSD drive and as far as I understand the warning relates to the S.M.A.R.T. status of which this drive doesn't support all parts. How can I reset the warning so I don't receive it every time when turning on the drive? Firmware reports: V400_01_040_N Here's what I have tried so far: Unplug and plug back in Open the case and remove the SSD, then put it back in Press the button on the back side (cover removed) while plugged in Press the button on the back side (cover removed) while not plugged in USB Connect = Refresh = Enter USB Connect = Safe Removal = Enter Advanced = Umount VHDD = Enter

    Read the article

  • Forgot to unmount/eject external hdd, lost moved files. OSX

    - by balupton
    So I was using my mac with my external hard drive connected via USB. I moved about 10gigs of data to it (via drag and drop while holding command to move the files rather than to copy them). They moved to the drive alright, but as I was having some issues and finder crashed after the transfer, I was unable to eject the volume and later everything froze so I had to do a hard restart (hold the power button). When I remounted the volume (plugged the external hdd back in) it no longer had any of the files which I moved onto it. How can I recover these files, as it was a lot of data! Cheers.

    Read the article

  • How much HDD space would I need to cache the web while respecting robot.txts?

    - by Koning Baard XIV
    I want to experiment with creating a web crawler. I'll start with indexing a few medium sized website like Stack Overflow or Smashing Magazine. If it works, I'd like to start crawling the entire web. I'll respect robot.txts. I save all html, pdf, word, excel, powerpoint, keynote, etc... documents (not exes, dmgs etc, just documents) in a MySQL DB. Next to that, I'll have a second table containing all restults and descriptions, and a table with words and on what page to find those words (aka an index). How much HDD space do you think I need to save all the pages? Is it as low as 1 TB or is it about 10 TB, 20? Maybe 30? 1000? Thanks

    Read the article

  • Calculating IOPS for a single HDD - what am I doing wrong?

    - by red888
    So I know there is no standardized way of calculating IOPS for a HDD, but from everything I have read it appears one of the most accurate formulas is the following: IOP/ms = + {rotational latency} + ({block size} / {data transfer rate}) Which is IOs per millisecond or what the book I've been reading calls "Disk Service Time". Also rotational latency is calculated as half of one rotation in milliseconds. This was taken from the EMC book "Information Storage and Management" -arguably a pretty reliable source right\wrong? Putting this formula into practice consider this Seagate data sheet. I am going to calculate IOPS for the ST3000DM001 model for a block size of 4kb: Seek Average (Write) = 9.5 -I'll measuring IOPS for writes Spindle speed = 7200rpm Average Data Rate = 156MB/s So my variables are: Seek Time = 9.5ms Rotational latency = (.5 / (7200rpm / 60)) = 0.004s = 4ms Data Rate = 156MB/s = (0.156MB/ms / 0.004MB) = 39 9.5ms + 4ms + 39 = IO/ms 52.5 1 / (52.5 * 0.001) = 19 IOPS 19 IOPS for this drive clearly is not right so what am I doing wrong?

    Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >