Search Results

Search found 3061 results on 123 pages for 'sata hdd'.

Page 25/123 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• How to diagnose disk errors when disk appears to be ok?

  - by Kylotan

  I have a six-month-old 1TB Seagate drive formatted into 2 NTFS partitions, and the disk appeared to be failing with Windows dropping down from UDMA to PIO mode, reporting Delayed Write Errors, and hanging Explorer when browsing directories. My initial suspicion was that the disk was dying. However, on further examination it appears that Ubuntu, which doesn't write to the volume frequently like Windows does, was able to read the disk properly and retrieve all the data intact, saving me from having to use an older backup. Finally, running the Seatools DOS diagnostic reported that the disk has no problems, ie. SMART errors and no bad sectors, apparently. This, in combination with the relative youth of the disk, suggests that something else is broken. The cable? The PSU? The integrated disk controller? But what would be a good way to diagnose the problem without risking damaging the data? I intend to extract the disk and try it in an external eSATA enclosure and see if the write errors cease, but in the event of the disk appearing to be fine, I would like to be able to confirm what part of the hardware is actually broken here in order to know just what needs replacing. Are there any good ways to go about this?

  Read the article

• How to diagnose disk errors when disk appears to be ok?

  - by Kylotan

  I have a six-month-old 1TB Seagate drive formatted into 2 NTFS partitions, and the disk appeared to be failing with Windows dropping down from UDMA to PIO mode, reporting Delayed Write Errors, and hanging Explorer when browsing directories. My initial suspicion was that the disk was dying. However, on further examination it appears that Ubuntu, which doesn't write to the volume frequently like Windows does, was able to read the disk properly and retrieve all the data intact, saving me from having to use an older backup. Finally, running the Seatools DOS diagnostic reported that the disk has no problems, ie. SMART errors and no bad sectors, apparently. This, in combination with the relative youth of the disk, suggests that something else is broken. The cable? The PSU? The integrated disk controller? But what would be a good way to diagnose the problem without risking damaging the data? I intend to extract the disk and try it in an external eSATA enclosure and see if the write errors cease, but in the event of the disk appearing to be fine, I would like to be able to confirm what part of the hardware is actually broken here in order to know just what needs replacing. Are there any good ways to go about this?

  Read the article

• FATA disk performance for VMware

  - by Sergei

  Hi, We are moving to the dataceneter and planning to have tiered storage on EVA4400 - FC RAID 10 for SQL databases and RAID5 across 24 FATA 1TB disks form VMware ESX guests.HP is describing FATA disks as suitable for near online storage, however I am not convinced that 24 spindles will not be enough for running VMWare for 3 ESX servers. Does anyone has opinion on why this could be a such a bad idea?

  Read the article

• Ubuntu hard disk problem

  - by Henadzy

  Hello! I have got the error with a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount and use filesystem which placed on this hard disk at other computer it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773890] ata3.00: cmd 60/18:10:9f:6b:ed/00:00:0e:00:00/40 tag 2 ncq 12288 in Apr 25 00:28:25 vare6gin kernel: [ 885.773893] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773900] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773904] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773918] ata3.00: cmd 60/08:18:3f:5f:ed/00:00:0e:00:00/40 tag 3 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773921] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773927] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773932] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773946] ata3.00: cmd 60/08:20:67:c8:91/00:00:05:00:00/40 tag 4 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773948] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773955] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773960] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

  Read the article

• eSATA hard drive falls asleep, takes ages to wake up.

  - by Dave Van den Eynde

  I'm using an external hard drive, a Western Digital MyBook 1TB of some sort with eSATA on an eSATA II ExpressCard adapter from Belkin on Windows Vista 32-bit. The issue I'm having is that after a while power management kicks in and puts the hard drive to sleep. When I resume my work and browse the drive, for example, the Explorer hangs and while I can still use my other apps, it takes a couple minutes for it to realize it should wake up the drive and recommence work. What's going on?

  Read the article

• ssd firmware, linux: updating large batch of drives

  - by wryfi

  I was recently hit with a fatal firmware bug that affected dozens of Crucial SSDs deployed in my datacenter. Many of the affected machines use LSI or other proprietary SAS controllers, which Crucial's bootable ISO does not recognize. None of the affected machines has a Windows license. The story is roughly similar for other SSD mfrs, including Samsung and Intel. To resolve this issue, I was forced to stop each machine, remove the affected SSD, remove the SSD from its hotswap caddy, install it temporarily into my ThinkPad, flash the firmware, reverse, rinse, repeat. It took the better part of a day to get through all the affected devices. I am looking for hardware, software, and/or purchasing strategies to ease this pain, as SSD firmware bugs seem inevitable, and our SSD footprint is growing. My first thought is to get a laptop with eSATA and one of these cables (http://www.newegg.com/Product/Product.aspx?Item=N82E16812311004). That should at least make it so I don't have to remove the drives from their caddies. Surely others have run into this. Any novel solutions?

  Read the article

• Problem with slow hard disk

  - by Makis Arvin

  We bought some new PCs in my company with the new iCore 7 and 8GB memory and the following hard disk: WESTERN DIGITAL WD8000AARS 800GB CAVIAR GREEN SATA2 The problem we have is that after installing windows XP64 SP2 the write speed of the hard disk is extremely low!. The windows system monitor shows that the Average Disk queue length is always at 100% and a winzip extract of 350mb takes about 8min. Is there any idea on where to start looking for the cause of that? Thanks

  Read the article

• How I disable "Safely remove hardware" in Windows 8?

  - by DarkGhostHunter

  I have a Marvell 91XX and I just updated to Windows 8. The problem I have with the latest drivers 1.0.2.1027 is the absence of "Policies" tab inside the Properties in the Device Manager, where I could disable de "Safely Remove Hardware". It was in Windows 7, but in the new version is not, so the OS shows my two hard disks has removable hardware and I can't do anything about it. Is gone forever? Is in another part? Or is not supported? PD: The best I can come up for a fix is to roll back to Windows 7, see if the option changes some regedit value, export, update to Windows 8 and import.

  Read the article

• Storing an arbitrary R object onto HDD?

  - by Harokitty

  I understand that we can export data matrices to csv or xlsx files. What about complex objects like lm? For example, in my work I might have a list of length 1000, each with a single lm() object. Each time I load R I have to wait a long time to populate the 1000 length list with these lm objects with a for loop or a lapply. I would rather just save the list somewhere on my HDD at the end of a session and open it at the start of the next session.

  Read the article

• Lenovo N100 and Samsung SSD 830, shouldn't this go faster than 100MB/s?

  - by Jook

  I recently upgrated my Lenovo N100 0768 with a Samsung SSD 830 - specified to support 520 MB/s read and 320MB/s write. However, having only SATA1 with max. of 150MB/s speed, it has to run in a slower mode - of course. But, shouldn't it be more on the edge of this limit than ranging between 90-115MB/s and averaging around 103MB/s? Or is this really as much as I can expect? Tested with HD-Tach. Has anyone comparable results on a SATA1 controller with a SSD drive faster than SATA1? Preferably similar to the Samsung 830?

  Read the article

• My external HD turned to RAW - How to recover my data?

  - by Matan Eldan

  I have an external HD (WD MyBook Essentials) with all of my backups (1TB) for some unknown reason, when I try to connect the drive (Tried several interfaces: eSATA/plugged it into my PC/USB) I get this message: "You need to format the disk in drive M: before you can use it" I've looked in disk management at the drive, and its listed in there - with the same full capacity. The file system under disk management now says RAW and that its healthy

  Read the article

• Why would my HDD main partition suddenly become hidden?

  - by Luis Oscar

  A few days ago I was using my computer as usual and I turned it off. The next day it wouldn't boot up. It just stayed after the hardware diagnostic window on the intermittent underscore screen. So clearly It wasn't booting up. I tried turning it on and off a couple of times with no avail. Finally I used windows 7 disk and it seemed as if there was no HDD. not even the installation would see the HDD. So i thought it was dead, i bought a new one installed it with windows and used a external case with the old HDD. plug it in and still couldn't see it. I finally downloaded a partition program EASUS or something and my HDD was there listed WITHOUT a system letter. I could however explore it and i set it as Unhidden and it came back to life. I could see it normally. I really just wish someone could explain to me what happened here, was it a virus? does it means the HDD is about to die? How can i prevent this or what should I do now? should i stop using this OLD HDD? Thanks

  Read the article

• Tools to backup an external hard disk

  - by Kaushik Gopal

  Hey people, What's the best method to take an exact copy of my external hard disk? A guru suggested rsync, but I was wondering if there's an easier alternative. I do remember reading somewhere that Acronis also does this. Was looking for your advice on the best option. I'm running Windows. Essentially i have an external HDD which has a lot of stuff synchronized across various pcs. I wish to take a backup of this external Hard disk (ext.HDDs aren't entirely reliable so want to keep a backup of my ext.HDD). Cheers. K

  Read the article

• western digital caviar black. EXT4-fs error [migrated]

  - by azat

  Recently I update my HDD on desktop machine, and bought WD Caviar Black. But after I format & copy information to it (using dd), and fix partitions size: I have next errors in kern.log: Aug 27 16:04:35 home-spb kernel: [148265.326264] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9054, 32254 clusters in bitmap, 32258 in gd Aug 27 16:07:11 home-spb kernel: [148421.493483] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9045, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.481693] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10299, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.487147] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.258711] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4345, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.277591] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.278202] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4344, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.284760] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.291983] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9051, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297495] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.297916] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9050, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297940] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.303213] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4425, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.312127] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.312487] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4424, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.317858] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.322231] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4336, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.326250] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.326599] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4335, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.332397] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.341957] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5764, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.350709] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.351127] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5763, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.355916] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.401055] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10063, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.404357] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.414699] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10073, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.420411] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.493933] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9059, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.493956] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. One time, machine rebooted (not manually), when I turn it on, it runs fsck on /dev/sdc2 and fix some errors and some files are missing on /dev/sdc2 I'v check /dev/sdc2 for badblocks, it doesn't have it ( using e2fsck -c /dev/sdc2 ) Here is the output of fsck http://pastebin.com/D5LmLVBY What else I can do to understand what's wrong here? BTW for /dev/sdc1 no message like that, in kern.log Linux version: 3.3.0 Distributive: Debian wheezy

  Read the article

• Two SATA HDDs connected using a Black Duet HDD Docking Station via eSATA to my Laptop, second drive

  - by leeand00

  Hi I am using a BlacX Duet HDD Docking Station to connect a 1TB WD Caviar Black SATA HDD (WD10000LSRTL) and a HITACHI SATA DESKSTAR (0S00163) to my G51VX (BestBuy) laptop via the eSATA port. When I plug in both HDDs in to the Docking Station, connect the docking station to my laptop and start Windows 7 (64-bit Ultimate), only the HDD in the first drive in the port actually shows up in My Computer and Disk Management. If I swap the drives positions I can get them both to work, but never at the same time. I also checked in the bios settings on the laptop, under Advanced-IDE Configuration-SATA Operation Mode, and it displays: SATA Operation Mode: [Enhanced] AHCI Port0 [Hard Disk] Device: Hard Disk Vendor: ST9320421AS LBA Mode: Supported S.M.A.R.T.: Supported AHCI Port5 [Hard Disk] Device: Hard Disk Vendor: Hitachi HDS721010CLA332 Size: 100.00 GB LBA Mode: Supported S.M.A.R.T.: Supported There should be a third drive, but I'm not certain why it is not being picked up. Additionally, before I played around with the settings in the IDE configuration, it used to display the DVD as well.

  Read the article

• How do I mount my External HDD with filesystem type errors?

  - by Snuggie

  I am a relatively new Ubuntu user and I am having some difficulty mounting my external 2TB HDD. When I first installed Linux my external HDD was working just fine, however, it has stopped working and I have a lot of important files on there that I need. Before my HDD would automatically mount and no worries. Now, however, it doesn't automatically mount and when I try to manually mount it I keep running into filesystem type errors that I can't seem to get past. Below are images that depict my step by step process of how I am trying to mount my HDD along with the errors I am receiving. If anybody has any idea what I am doing wrong or how to correct the issue I would greatly appreciate it. Step 1) Ensure the computer recognizes my external HDD. pj@PJ:~$ dmesg ... [ 5790.367910] scsi 7:0:0:0: Direct-Access WD My Passport 0748 1022 PQ: 0 ANSI: 6 [ 5790.368278] scsi 7:0:0:1: Enclosure WD SES Device 1022 PQ: 0 ANSI: 6 [ 5790.370122] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 5790.370310] ses 7:0:0:1: Attached Enclosure device [ 5790.370462] ses 7:0:0:1: Attached scsi generic sg3 type 13 [ 5792.971601] sd 7:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5792.972148] sd 7:0:0:0: [sdb] Write Protect is off [ 5792.972162] sd 7:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 5792.972591] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.972605] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.975235] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.975249] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.987504] sdb: sdb1 [ 5792.988900] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.988911] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.988920] sd 7:0:0:0: [sdb] Attached SCSI disk Step 2) Check if it mounted properly (it does not) pj@PJ:~$ df -ah Filesystem Size Used Avail Use% Mounted on /dev/sda1 682G 3.9G 644G 1% / proc 0 0 0 - /proc sysfs 0 0 0 - /sys none 0 0 0 - /sys/fs/fuse/connections none 0 0 0 - /sys/kernel/debug none 0 0 0 - /sys/kernel/security udev 2.9G 4.0K 2.9G 1% /dev devpts 0 0 0 - /dev/pts tmpfs 1.2G 928K 1.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.9G 156K 2.9G 1% /run/shm gvfs-fuse-daemon 0 0 0 - /home/pj/.gvfs Step 3) Try mounting manually using NTFS and VFAT (both as SDB and SDB1) pj@PJ:~$ sudo mount /dev/sdb /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount /dev/sdb1 /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t ntfs /dev/sdb /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t vfat /dev/sdb /media/Passport/ mount: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so pj@PJ:~$ sudo mount -t ntfs /dev/sdb1 /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t vfat /dev/sdb1 /media/Passport/ mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

  Read the article

• What kind of SATA interface is on a Thinkpad X120E?

  - by Jorge Castro

  I recently ordered a Thinkpad X120E with an AMD Fusion (Zacate) chipset. I am eyeballing an SSD for it, however newer SSDs are coming out with 6Gbps SATA interfaces. I doubt such a cheap laptop has 6Gbps SATA, but I'm debating waiting the a bit longer until the Intel 510 series come out, if anything to future proof myself by putting it in this laptop and then later on when I do upgrade to a laptop with 6Gbps SATA I'll be good to go. The hardware manual mentions that the motherboard is for a "AMD Fusion E-350" but the specifications of each hardware part isn't part of the manual. Does anyone have any information on the kind of SATA controllers in Fusion laptops so I can make a better purchasing decision?

  Read the article

• HD Tune warning for "Reallocated Event Count" with a new/unused drive. How serious is that?

  - by Developer Art

  I've just looked at the health status of my old 2,5 inch 500 Gb Fujitsu drive with a popular "HD Tune" utility. It shows a warning for the "Reallocated Event Count" property. How serious is that? The thing is that the drive is practically new. I pulled it out of a new laptop over a year ago and never used it since. Right now it only has 53 "Power On" hours which sounds about right since I only had it running a few evenings overnight before switching it for something more performant. Does this warning indicate that the drive is likely to fail some time in the future? I'm somewhat perplexed since the drive is effectively unused. What is more, I have arranged with somebody to buy off this drive since I don't really need. It is 12,5 mm thick (with 3 plates) meaning it doesn't fit into an external enclosure which makes it quite useless to me. Can I give away the drive without having it on my conscience or better cancel the deal? In other words, can the drive be used safely for years to come or better throw it away? I'm running a sector test now to see if there are any real problems. Will post the results as soon as they're available.

  Read the article

• How to safely remove a USB device from 2008 Core server?

  - by Qwerty

  I have a Hyper-V Core server 2008 that I administer via command line and remote tools. We have now got a new backup system in place and it involves me connecting an External USB drive (G:) to backup system state files. My question is how should I safely remove the drive for its weekly offsite swap? I've tried using the devcon tool however it just says the 'removal failed with no devices removed' with no other explanation. I have noticed that there isnt a readily available x64 version of devcon and that might be the cause of the problem. (I have read of people downloading a amd64 version but I have not located it myself, if someone knows where it is please let me know). The devcon command worked on my old 2003 x86 server with the command: devcon remove *3200AVJ_EXTERNAL* I have also looked at using fsutil volume dismount g: but it doesn't seem to work as G: is still listed as a connected volume. I have checked that the volume is not in use via remote tools and the net file command. Both show no open files in the G:\ volume. This could be a decent substitute as it might be used to flush any remaining IO to the volume can anyone clarify? Thanks in advance.

  Read the article

• Mounting 2.5" SSD in Antec Atlas 550's 3.5" bay

  - by cecilkorik

  Just got some new SSDs to add to my servers, unfortunately there doesn't appear to be anywhere to actually mount them. The cases are Antec Atlas 550 mid-tower server cases. The problem is that the 3.5" bays are intended for 3.5" hard drives (obviously) not SSDs, so they are mounted from the bottom with rubber grommets to reduce vibration. There are NO side-holes in any of the 3.5" bays, all mounting has to be done from the bottom of the drive, through the thick rubber grommets, which requires special extra-long screws with large heads. Those screws will not work with the SSD, the thread is too coarse, 2.5" drives apparently use M3 screws with a finer pitch. The case's 3.5" bays have holes aligned for 2.5" drives and by moving the grommets into the appropriate holes they line up with the SSD. But that's as far as I can get. I don't have and cannot find any screws that use the finer M3 pitch that are long enough and have the wide head. I can't remove the grommets because the screw holes are much too wide without them, the entire head of the screw fits through. And again, there are no side-holes, so I can't use the mounting bracket that came with the drive nor any other 2.5"-3.5" bracket I've found. Here is a pic of what I am dealing with (note that the SSD is just resting on the case, it's not currently screwed in if that's not clear) Any ideas for safely mounting these little guys without resorting to duct tape or superglue would be very appreciated. If anyone knows where I could buy the appropriate type of M3 threaded screw or has any other ideas please help me out here.

  Read the article

• How to install Windows 7 from MS-DOS?

  - by B11002

  Before, I can copy Windows XP CD contents to D:\windowsxp, then Boot DOS CD format C: /s /q D:\windowsxp\i386\winnt.exe How to install Windows 7 from MS-DOS? I found install from USB only.

  Read the article

• Dismount USB External Drive using powershell

  - by JC

  Hello, I am attempting to dismount an external USB drive using powershell and I cannot successfuly do this. The following script is what I use: #get the Win32Volume object representing the volume I wish to eject $drive = Get-WmiObject Win32_Volume -filter "DriveLetter = 'F:'" #call dismount on that object there by ejecting drive $drive.Dismount($Force , $Permanent) I then check my computer to check if drive is unmounted but it is now. The boolean parameters $force and $permanent have been tried with different permutations to no avail. The exit code returned by the dismount command changes when the params are toggled. (0,0) = exit code 0 (0,1) = exit code 2 (1,0) = exit code 0 (1,1) = exit code 2 The documentation for exit code 2 indicates that there are existing mount points as a reason why it cannot dismount. Although I am trying to dismount the only mount point that exists so I am unsure what this exit code is trying to tell me. Having already trawled the web for people experiencing similar problems I have only found one additional command to try and that is the following: # executed after the .Dismount() command $drive.Put() This additional command does not help. I am running out of things to try, so any assistance anyone can give me would be greatly appreciated, Thanks.

  Read the article

• Network attached external harddrive from another computer.

  - by Paul Knopf

  I have a server that is setup in raid. It is on the same network as my main computer. I would like to have some of the memory on my server to act as a network attached drive on my main computer. Basically, I want it to be a new data drive (similar two C:\, but 2nd drives are mostly E:). That way, I can reformat my main computer without loosing any important data. And the data that is saved (on server E:\ drive) is secured via raid mirroring.

  Read the article

• best storage option for recording live streaming video

  - by Alchemical

  We're creating a new web site that includes video chat capabilities. Wowza Server is being used for the streaming media. We would like the capability for users to record their video chats in certain circumstances. Is it feasible to record the videos to the same server running Wowza? Or performance-wise, would it make more sense to store them on another server? I understand SANs are popular as well, but I'm a little concerned about cost for those as we are on a fairly tight budget. Currently we have two servers with pretty decent RAID cnofigurations for storage, one has 14TB and the other 6TB. Mostly concerned if doing the recording on the same server as the streaming server (or web server), could significantly adversely affect that server's primary function.

  Read the article

• Best way to use my windows box as a backup?

  - by DFischer

  I put a 1.5 TB HD in my Windows 7 box and my main computer is a MBP. I have a lot of professional files/folders in a FireWire 800 external HD connected to the MBP and I want to use the 1.5 TB HD in my Windows 7 box as a backup for both the HD and MBP. Right now I am just copying files manually to the HD over the network and that's very slow and open to failure (not rsync'd.) Anyone suggest some appropriate solutions? Should I just figure out how to setup RSync on the windows box or is there a better alternative? Thanks!

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >