Search Results

Search found 728 results on 30 pages for 'soft'.

Page 29/30 | < Previous Page | 25 26 27 28 29 30  | Next Page >

• help setting up an IPSEC vpn from my linux box

  - by robthewolf

  I have an office with a router and a remote server (Linux - Ubuntu 10.10). Both locations need to connect to a data supplier through a VPN. The VPN is an IPSEC gateway. I was able to configure my Linksys rv42 router to create a VPN connection successfully and now I need to do the same for Linux server. I have been messing around with this for too long. First I tried OpenVPN, but that is SSL and not IPSEC. Then I tried Shrew. I think I have the settings correct but I haven't been able to create the connection. It maybe that I have to use something else like a direct IPSEC config or something like that. If someone knows of a way to turn the following settings that I have been given below into a working IPSEC VPN connection I would be very grateful. Here are the settings I was given that must be used to connect to my supplier: Local destination network: 192.168.4.0/24 Local destination hosts: 192.168.4.100 Remote destination network: 192.167.40.0/24 Remote destination hosts: 192.168.40.27 VPN peering point: xxx.xxx.xxx.xxx Then they have given me the following details: IPSEC/ISAKMP Phase 1 Parameters: Authentication method: pre shared secret Diffie Hellman group: group 2 Encryption Algorithm: 3DES Lifetime in seconds:28800 Phase 2 parameters: IPSEC security: ESP Encryption algortims: 3DES Authentication algorithms: MD5 lifetime in seconds: 28800 pfs: disabled Here are the settings from my attempt to use shrew: n:version:2 n:network-ike-port:500 n:network-mtu-size:1380 n:client-addr-auto:0 n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:1 n:client-dns-used:1 b:auth-mutual-psk:YjJzN2QzdDhyN2EyZDNpNG42ZzQ= n:phase1-dhgroup:2 n:phase1-keylen:0 n:phase1-life-secs:28800 n:phase1-life-kbytes:0 n:vendor-chkpt-enable:0 n:phase2-keylen:0 n:phase2-pfsgroup:-1 n:phase2-life-secs:28800 n:phase2-life-kbytes:0 n:policy-nailed:0 n:policy-list-auto:1 n:client-dns-auto:1 n:network-natt-port:4500 n:network-natt-rate:15 s:client-dns-addr:0.0.0.0 s:client-dns-suffix: s:network-host:xxx.xxx.xxx.xxx s:client-auto-mode:pull s:client-iface:virtual s:client-ip-addr:192.168.4.0 s:client-ip-mask:255.255.255.0 s:network-natt-mode:enable s:network-frag-mode:disable s:auth-method:mutual-psk s:ident-client-type:address s:ident-client-data:192.168.4.0 s:ident-server-type:address s:ident-server-data:192.168.40.0 s:phase1-exchange:aggressive s:phase1-cipher:3des s:phase1-hash:md5 s:phase2-transform:3des s:phase2-hmac:md5 s:ipcomp-transform:disabled Finally here is the debug output from the shrew log: 10/12/22 17:22:18 ii : ipc client process thread begin ... 10/12/22 17:22:18 < A : peer config add message 10/12/22 17:22:18 DB : peer added ( obj count = 1 ) 10/12/22 17:22:18 ii : local address 217.xxx.xxx.xxx selected for peer 10/12/22 17:22:18 DB : tunnel added ( obj count = 1 ) 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : client config message 10/12/22 17:22:18 < A : local id '192.168.4.0' message 10/12/22 17:22:18 < A : remote id '192.168.40.0' message 10/12/22 17:22:18 < A : preshared key message 10/12/22 17:22:18 < A : peer tunnel enable message 10/12/22 17:22:18 DB : new phase1 ( ISAKMP initiator ) 10/12/22 17:22:18 DB : exchange type is aggressive 10/12/22 17:22:18 DB : 217.xxx.xxx.xxx:500 <- 206.xxx.xxx.xxx:500 10/12/22 17:22:18 DB : c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 DB : phase1 added ( obj count = 1 ) 10/12/22 17:22:18 : security association payload 10/12/22 17:22:18 : - proposal #1 payload 10/12/22 17:22:18 : -- transform #1 payload 10/12/22 17:22:18 : key exchange payload 10/12/22 17:22:18 : nonce payload 10/12/22 17:22:18 : identification payload 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v00 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v01 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v02 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v03 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( rfc ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports DPDv1 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SHREW SOFT compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is NETSCREEN compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SIDEWINDER compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is CISCO UNITY compatible 10/12/22 17:22:18 = : cookies c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 = : message 00000000 10/12/22 17:22:18 - : send IKE packet 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 ( 484 bytes ) 10/12/22 17:22:18 DB : phase1 resend event scheduled ( ref count = 2 ) 10/12/22 17:22:18 ii : opened tap device tap0 10/12/22 17:22:28 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:38 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:48 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:58 ii : resend limit exceeded for phase1 exchange 10/12/22 17:22:58 ii : phase1 removal before expire time 10/12/22 17:22:58 DB : phase1 deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : closed tap device tap0 10/12/22 17:22:58 DB : tunnel stats event canceled ( ref count = 1 ) 10/12/22 17:22:58 DB : removing tunnel config references 10/12/22 17:22:58 DB : removing tunnel phase2 references 10/12/22 17:22:58 DB : removing tunnel phase1 references 10/12/22 17:22:58 DB : tunnel deleted ( obj count = 0 ) 10/12/22 17:22:58 DB : removing all peer tunnel refrences 10/12/22 17:22:58 DB : peer deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : ipc client process thread exit ...

  Read the article

• Vertical textes inside of table headers with respect of a JavaScript based on SVG library

  - by Oleg

  I use jqGrid with many columns contains Boolean information, which are displayed as checkboxes inside of table (see http://www.ok-soft-gmbh.com/VerticalHeaders/TestFixedO.htm as an example). To display information more compact I use vertical column headers. It works very well and works in jqGrid in all browsers (see my discussion with Tony Tomov in jqGrid forum http://www.trirand.com/blog/?page_id=393/feature-request/headers-with-vertical-orientation/), but in IE vertical texts looks not nice enough. I was asked from users why the texted displayed so strange. So I think about using a JavaScript based SVG library like SVG Web ( http://code.google.com/p/svgweb/ ) or Raphaël ( http://raphaeljs.com/ ). SVG is very powerful and it is difficult to find a good example is not very easy. I need only display vertical texts (-90 grad, from bottom to up) and use if possible without working in mode of absolute position. So one more times my question: I need have a possibility to display vertical texts (-90 grad rotation) inside of <td> element of table header. I want use a JavaScript based SVG library like SVG Web or Raphaël. The solution must support on IE6. Have somebody a good reference to example which could help me to do this? If somebody post a whole solution of the problem I would be happy. To be exact here is my current solution: I define .rotate { -webkit-transform: rotate(-90deg); /* Safari, Chrome */ -moz-transform: rotate(-90deg); /* Firefox */ -o-transform: rotate(-90deg); /* Opera starting with 10.50 */ /* Internet Explorer: */ filter: progid:DXImageTransform.Microsoft.BasicImage(rotation=3); } define RotateCheckboxColumnHeaders function var RotateCheckboxColumnHeaders = function (grid, headerHeight) { // we use grid as context (if one have more as one table on tnhe page) var trHead = $("thead:first tr", grid.hdiv); var cm = grid.getGridParam("colModel"); $("thead:first tr th").height(headerHeight); headerHeight = $("thead:first tr th").height(); for (var iCol = 0; iCol < cm.length; iCol++) { var cmi = cm[iCol]; if (cmi.formatter === 'checkbox') { // we must set width of column header div BEFOR adding class "rotate" to // prevent text cutting based on the current column width var headDiv = $("th:eq(" + iCol + ") div", trHead); headDiv.width(headerHeight).addClass("rotate"); if (!$.browser.msie) { if ($.browser.mozilla) { headDiv.css("left", (cmi.width - headerHeight) / 2 + 3).css("bottom", 7); } else { headDiv.css("left", (cmi.width - headerHeight) / 2); } } else { var ieVer = jQuery.browser.version.substr(0, 3); // Internet Explorer if (ieVer !== "6.0" && ieVer !== "7.0") { headDiv.css("left", cmi.width / 2 - 4).css("bottom", headerHeight / 2); $("span", headDiv).css("left", 0); } else { headDiv.css("left", 3); } } } } }; And include a call like RotateCheckboxColumnHeaders(grid, 110); after creating jqGrid.

  Read the article

• Windows NT Service shutdown issues

  - by Jeremiah Gowdy

  I have developed middleware that provides RPC functionality to multiple client applications on multiple platforms within our organization. The middleware is written in C# and runs as a Windows NT Service. It handles things like file access to network shares, database access, etc. The middleware is hosted on two high end systems running Windows Server 2008 R2. When one of our server administrators goes to reboot the machine, primarily to do Windows Updates, there are serious problems with how the system behaves in regards to my NT Service. My service is designed to immediately stop listening for new connections, immediately start refusing new requests on existing connections, and otherwise shut down as rapidly as possible in the case of an OnStop or OnShutdown request from the SCM. Still, to maintain system integrity, operations that are currently in progress are allowed to continue for a reasonable time. Usually the server shuts down inside of 30 seconds (when the service is manually stopped for example). However, when the system is instructed to restart, my service immediately loses access to network drives and UNC paths, causing data integrity problems for any open files and partial writes to those locations. My service does list Workstation (and thus SMB Redirector) as a dependency, so I would think that my service would need to be stopped prior to Workstation/Redirector being stopped if Windows were honoring those dependencies. Basically, my application is forced to crash and burn, failing remote procedure calls and eventually being forced to terminate by the operating system after a timeout period has elapsed (seems to be on the order of 20-30 seconds). Unlike a Windows application, my Windows NT Service doesn't seem to have any power to stop a system shutdown in progress, delay the system shutdown, or even just the opportunity to save out any pending network share disk writes before being forcibly disconnected and shutdown. How is an NT Service developer supposed to have any kind of application integrity in this environment? Why is it that Forms Applications get all of the opportunity to finish their business prior to shutdown, while services seem to get no such benefits? I have tried: Calling SetProcessShutdownParameters via p/invoke to try to notify my application of the shutdown sooner to avoid Redirector shutting down before I do. Calling ServiceBase.RequestAdditionalTime with a value less than or equal to the two minute limit. Tweaking the WaitToKillServiceTimeout Everything I can think of to make my service shutdown faster. But in the end, I still get ~30 seconds of problematic time in which my service doesn't even seem to have been notified of an OnShutdown event yet, but requests are failing due to redirector no longer servicing my network share requests. How is this issue meant to be resolved? What can I do to delay or stop the shutdown, or at least be allowed to shut down my active tasks without Redirector services disappearing out from under me? I can understand what Microsoft is trying to do to prevent services from dragging their feet and showing shutdowns, but that seems like a great goal for Windows client operating systems, not for servers. I don't want my servers to shutdown fast, I want operational integrity and graceful shutdowns. Thanks in advance for any help you can provide. PS in regards to writing my own middleware, this is for a telephony application with sub-second "soft-realtime" response time requirements. It does make sense, and it's not a point I'm looking to debate. :)

  Read the article

• passing folder path from an asp file

  - by sushant

  i am using this code to navigate through the folders available on a remote computer. <%@ Language=VBScript %><% option explicit dim sRoot, sDir, sParent, objFSO, objFolder, objFile, objSubFolder, sSize %> <META content="Microsoft Visual Studio 6.0" name=GENERATOR><!-- Author: Adrian Forbes --> <% sRoot = "\\iflblw-bpd-12\Vercon_IP-BPD-01\SOFT" sDir = Request("Dir") sDir = sDir & "\" Response.Write "<h1>" & sDir & "</h1>" & vbCRLF Set objFSO = CreateObject("Scripting.FileSystemObject") on error resume next Set objFolder = objFSO.GetFolder(sRoot & sDir) if err.number <> 0 then Response.Write "Could not open folder" Response.End end if on error goto 0 sParent = objFSO.GetParentFolderName(objFolder.Path) ' Remove the contents of sRoot from the front. This gives us the parent ' path relative to the root folder ' eg. if parent folder is "c:webfilessubfolder1subfolder2" then we just want "subfolder1subfolder2" sParent = mid(sParent, len(sRoot) + 1) Response.Write "<table border=""1"">" ' Give a link to the parent folder. This is just a link to this page only pssing in ' the new folder as a parameter Response.Write "<tr><td colspan=3><a href=""browse.asp?dir=" & Server.URLEncode(sParent) & """>Parent folder</a></td></tr>" & vbCRLF ' Now we want to loop through the subfolders in this folder For Each objSubFolder In objFolder.SubFolders ' And provide a link to them Response.Write "<tr><td colspan=3><a href=""browse.asp?dir=" & Server.URLEncode(sDir & objSubFolder.Name) & """>" & objSubFolder.Name & "</a></td></tr>" & vbCRLF Next ' Now we want to loop through the files in this folder 'For Each objFile In objFolder.Files ' if Clng(objFile.Size) < 1024 then ' sSize = objFile.Size & " bytes" ' else ' sSize = Clng(objFile.Size / 1024) & " KB" 'end if ' And provide a link to view them. This is a link to show.asp passing in the directory and the file ' as parameters ' Response.Write "<tr><td><a href=""show.asp?file=" & server.URLEncode(objFile.Name) & "&dir=" & server.URLEncode (sDir) & """>" & objFile.Name & "</a></td><td>" & sSize & "</td><td>" & objFile.Type & "</td></tr>" & vbCRLF 'Next Response.Write "</table>" %> i want to pass the folder path to a form on another page. actually while filling the form, this page should be called. how to pass the path? for ex: what i need is that when a user wants to select a folder, he clicks a button which calls this page. and on selecting the folder , the folder path should be returned to the form. any help is really appreciated. and sorry for the formatting issue.

  Read the article

• Having problem loading data from AppDelegate using UITableView into a flip view, loads first view bu

  - by Ms. Ryann

  AppDelegate: @implementation Ripe_ProduceGuideAppDelegate -(void)applicationDidFinishLaunching:(UIApplication *)application { Greens *apricot = [[Greens alloc] init]; apricot.produceName = @"Apricot"; apricot.produceSight = @"Deep orange or yellow orange in appearance, may have red tinge, no marks or bruises. "; apricot.produceTouch = @"Firm to touch and give to gentle pressure, plump."; apricot.produceSmell = @"Should be Fragrant"; apricot.produceHtoP = @"raw, salads, baked, sauces, glazes, desserts, poached, stuffing."; apricot.produceStore = @"Not ripe: place in brown paper bag, at room temperature and out of direct sunlight, close bag for 2 - 3 days. Last for a week. Warning: Only refrigerate ripe apricots."; apricot.produceBest = @"Spring & Summer"; apricot.producePic = [UIImage imageNamed:@"apricot.jpg"]; Greens *artichoke = [[Greens alloc] init]; artichoke.produceName = @"Artichoke"; artichoke.produceSight = @"Slightly glossy dark green color and sheen, tight petals that are not be too open, no marks, no brown petals or dried out look. Stem should not be dark brown or black."; artichoke.produceTouch = @"No soft spots"; artichoke.produceSmell = @" Should not smell"; artichoke.produceHtoP = @"steam, boil, grill, saute, soups"; artichoke.produceStore = @"Stand up in vase of cold water, keeps for 2 -3 days. Or, place in refrigerator loose without plastic bag. May be frozen, if cooked but not raw."; artichoke.produceBest = @"Spring"; artichoke.producePic = [UIImage imageNamed:@"artichoke.jpg"]; self.produce = [[NSMutableArray alloc] initWithObjects:apricot, artichoke, nil]; [apricot release]; [artichoke release]; FirstView: @implementation ProduceView -(id)initWithIndexPath: (NSIndexPath *)indexPath { if (self == [super init] ){ index = indexPath; } return self; } -(void)viewDidLoad { Ripe_ProduceGuideAppDelegate *delegate = (Ripe_ProduceGuideAppDelegate *) [[UIApplication sharedApplication] delegate]; Greens *thisProduce = [delegate.produce objectAtIndex:index.row]; self.title = thisProduce.produceName; sightView.text = thisProduce.produceSight; touchView.text = thisProduce.produceTouch; smellView.text = thisProduce.produceSmell; picView.image = thisProduce.producePic; } FlipView: @implementation FlipsideViewController @synthesize flipDelegate; -(id)initWithIndexPath: (NSIndexPath *)indexPath { if ( self == [super init]) { index = indexPath; } return self; } -(void)viewDidLoad { Ripe_ProduceGuideAppDelegate *delegate = (Ripe_ProduceGuideAppDelegate *) [[UIApplication sharedApplication] delegate]; Greens*thisProduce = [delegate.produce objectAtIndex:index.row]; self.title = thisProduce.produceName; bestView.text = thisProduce.produceBest; htopView.text = thisProduce.produceHtoP; storeView.text = thisProduce.produceStore; picView.image = thisProduce.producePic; } *the app works, the flip view for Artichoke shows the information for Apricot. Been working on it for two days. I have been working with iPhone apps for two months now and would very much appreciate any assistance with this problem. Thank you very much.

  Read the article

• Why can't my program display this dialog box, while another program can?

  - by nonoitall

  I'm trying to write a wrapper for Winamp input plugins and have hit a bit of a snag. I'd like my wrapper to be able to display a plugin's configuration dialog, which is (or should be) achieved by calling the plugin's Config(HWND hwndParent) function. For most plugins, this works fine and my program is able to display the plugin's configuration dialog. However, 64th Note (a plugin for playing USF files) is giving me problems. Winamp can display its configuration dialog just fine, but whenever I try to display it from my wrapper, the dialog gets destroyed before it ever shows itself. Thankfully, 64th Note is open source, so I took a look at its innards to try and get an idea of what's going wrong. I've trimmed off the irrelevant bits and am left with this: Config function in the plugin (should show configuration dialog): void Config(HWND hwndParent) { DialogBox(slave, (const char *) IDD_CONFIG_WINDOW, NULL, configDlgProc); } (Slave is the plugin DLL's HINSTANCE handle.) The proc for the dialog is as follows (I have stripped out all the functionality, since it doesn't appear to have an influence on this problem): BOOL CALLBACK configDlgProc(HWND hDlg, UINT uMsg, WPARAM wParam, LPARAM lParam) { return 0; } The template for IDD_CONFIG_WINDOW is as follows: IDD_CONFIG_WINDOW DIALOGEX 0, 0, 269, 149 STYLE DS_SETFONT | DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU CAPTION "64th Note configuration" FONT 8, "MS Sans Serif", 0, 0, 0x0 BEGIN DEFPUSHBUTTON "OK",IDOK,212,38,50,14 CONTROL "Play Forever",IDC_NOLENGTH,"Button",BS_AUTORADIOBUTTON,7,7,55,8 CONTROL "Always Use Default Length",IDC_SETLEN,"Button",BS_AUTORADIOBUTTON,7,17,101,8 CONTROL "Default Length",IDC_DEFLEN,"Button",BS_AUTORADIOBUTTON,7,29,63,8 EDITTEXT IDC_DEFLENVAL,71,28,38,12,ES_AUTOHSCROLL EDITTEXT IDC_DEFFADEVAL,71,42,38,12,ES_AUTOHSCROLL CONTROL "Detect Silence",IDC_DETSIL,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,7,56,63,8 EDITTEXT IDC_DETSILVAL,71,56,38,12,ES_AUTOHSCROLL CONTROL "Slider2",IDC_PRISLIDER,"msctls_trackbar32",TBS_AUTOTICKS | WS_TABSTOP,74,90,108,11 EDITTEXT IDC_TITLEFMT,7,127,255,15,ES_AUTOHSCROLL CONTROL "Default to file name on missing field",IDC_FNONMISSINGTAG, "Button",BS_AUTOCHECKBOX | WS_TABSTOP,50,114,124,8 CONTROL "Use Recompiler CPU",IDC_RECOMPILER,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,7,83,8 CONTROL "Round Frequency",IDC_ROUNDFREQ,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,16,73,8 CONTROL "Seek Backwards",IDC_BACKWARDS,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,26,70,8 CONTROL "Fast Seek",IDC_FASTSEEK,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,35,48,8 CONTROL "RSP Sections",IDC_SECTIONS,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,45,60,8 CONTROL "Soft Amplify",IDC_SOFTAMP,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,54,53,8 CONTROL "Audio HLE",IDC_AUDIOHLE,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,63,50,8 CONTROL "Auto Audio HLE",IDC_AUTOAUDIOHLE,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,72,64,8 CONTROL "Display Errors",IDC_DISPERROR,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,81,58,8 EDITTEXT IDC_RELVOL,211,104,28,12,ES_AUTOHSCROLL PUSHBUTTON "Cancel",IDCANCEL,212,54,50,14 PUSHBUTTON "Help",IDHELPBUTTON,212,71,50,14 LTEXT "Title format:",IDC_STATIC,7,113,38,8 LTEXT "seconds",IDC_STATIC,112,29,28,8 LTEXT "Default Fade",IDC_STATIC,19,43,42,8 LTEXT "seconds",IDC_STATIC,112,43,28,8 LTEXT "seconds",IDC_STATIC,112,57,28,8 CTEXT "CPU Thread Priority",IDC_STATIC,7,91,63,8 CTEXT "Look ma, I'm data!",IDC_CPUPRI,75,104,108,8 LTEXT "Relative Volume",IDC_STATIC,199,94,52,8 LTEXT "Fade Type",IDC_STATIC,7,75,35,8 COMBOBOX IDC_FADETYPE,45,72,87,74,CBS_DROPDOWNLIST | WS_TABSTOP END Naturally, without any substance in the proc function, the dialog doesn't have any functionality, but it still displays in Winamp when the Config function is invoked. However, it does not appear when I invoke it from my wrapper program. When I monitored the messages sent to the dialog in its proc function, I saw that WM_DESTROY and WM_NCDESTROY were sent within the first few messages, though I have no clue as to why. If I change the Config function so that it displays the plugin's About dialog instead of its configuration dialog, both Winamp and my wrapper will display the About dialog, which suggests that there is something unique to the configuration dialog template that's causing the problem. The modified Config function reads like so: void Config(HWND hwndParent) { DialogBox(slave, (const char *) IDD_ABOUTBOX, NULL, configDlgProc); } The template for the About dialog is as follows: IDD_ABOUTBOX DIALOGEX 0, 0, 152, 151 STYLE DS_SETFONT | DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU CAPTION "About 64th Note" FONT 8, "MS Sans Serif", 0, 0, 0x1 BEGIN LTEXT "64th Note v1.2 beta 3\nBased on Project 64 1.6 by Zilmar and Jabo\nAudio HLE by Azimer\nPSF concept and tagging by Neill Corlett\nPlayer by hcs, Josh W, dr0\nhttp://hcs64.com/usf",IDC_STATIC,7,94,138,50 CONTROL 110,IDC_STATIC,"Static",SS_BITMAP,26,7,95,86,WS_EX_DLGMODALFRAME END Like I said, my wrapper displays the About dialog just fine, as does Winamp. Why can Winamp display the Config dialog, while my wrapper cannot?

  Read the article

• Vertical text inside table headers using a JavaScript-based SVG library

  - by Oleg

  I use jqGrid with many columns containing boolean information, which are displayed as checkboxes inside the table (see http://www.ok-soft-gmbh.com/VerticalHeaders/TestFixedO.htm as an example). To display information more compactly I use vertical column headers. It works very well and works in jqGrid in all browsers (see my discussion with Tony Tomov in jqGrid forum http://www.trirand.com/blog/?page_id=393/feature-request/headers-with-vertical-orientation/), but in IE vertical text is blurred and doesn't look nice enough (open the link above in IE and you will see exactly what I mean). I was asked from users why the text displayed so strangely. So I'm thinking of using a JavaScript-based SVG library like SVG Web ( http://code.google.com/p/svgweb/ ) or Raphaël ( http://raphaeljs.com/ ). SVG is very powerful and it is difficult to find a good example. I need only to display vertical text (-90 grad, from the bottom up) and use if possible without working in mode of absolute positioning. So one more time my question: I need to have a possibility to display vertical text (-90 grad rotation) inside <td> elements of a table header. I want to use a JavaScript-based SVG library like SVG Web or Raphaël. The solution must support IE6. Does anybody have a good reference example which could help me do this? If somebody posts a whole solution of the problem I would be happy. To be exact here is my current solution: I define .rotate { -webkit-transform: rotate(-90deg); /* Safari 3.1+, Chrome */ -moz-transform: rotate(-90deg); /* Firefox 3.5+ */ -o-transform: rotate(-90deg); /* Opera starting with 10.50 */ /* Internet Explorer: */ filter: progid:DXImageTransform.Microsoft.BasicImage(rotation=3); /* IE6, IE7 */ -ms-filter: "progid:DXImageTransform.Microsoft.BasicImage(rotation=3)" /* IE8 */; } define RotateCheckboxColumnHeaders function var RotateCheckboxColumnHeaders = function (grid, headerHeight) { // we use grid as context (if one have more as one table on tnhe page) var trHead = $("thead:first tr", grid.hdiv); var cm = grid.getGridParam("colModel"); $("thead:first tr th").height(headerHeight); headerHeight = $("thead:first tr th").height(); for (var iCol = 0; iCol < cm.length; iCol++) { var cmi = cm[iCol]; if (cmi.formatter === 'checkbox') { // we must set width of column header div BEFOR adding class "rotate" to // prevent text cutting based on the current column width var headDiv = $("th:eq(" + iCol + ") div", trHead); headDiv.width(headerHeight).addClass("rotate"); if (!$.browser.msie) { if ($.browser.mozilla) { headDiv.css("left", (cmi.width - headerHeight) / 2 + 3).css("bottom", 7); } else { headDiv.css("left", (cmi.width - headerHeight) / 2); } } else { var ieVer = jQuery.browser.version.substr(0, 3); // Internet Explorer if (ieVer !== "6.0" && ieVer !== "7.0") { headDiv.css("left", cmi.width / 2 - 4).css("bottom", headerHeight / 2); $("span", headDiv).css("left", 0); } else { headDiv.css("left", 3); } } } } }; And include a call like RotateCheckboxColumnHeaders(grid, 110); after creating jqGrid.

  Read the article

• CodePlex Daily Summary for Thursday, March 18, 2010

  CodePlex Daily Summary for Thursday, March 18, 2010New ProjectsBordecal tools for FxCop: Bordecal tools for FxCop provides an extended framework for FxCop rule development. It allows rule developers to avoid using embedded XML resource...DotNetNuke® Skin City: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by allsnnskins. We integrate orange color and black colour in this ...DotNetNuke® Skin Dawn: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by allsnnskins. This design reflects the theme of daylight. U...DotNetNuke® Skin Dream: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by WhNuke. Uses the DNNJDMenu skin object.DotNetNuke® Skin Expression: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Salar Golestanian of SalarO. This is a pure CSS skin with ...DotNetNuke® Skin ModernBiz: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by allsnnskins. This simple and unaffected company skin uses...DotNetNuke® Skin Profound: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by WhNuke Technology. This skin is simple and clean and the ...DotNetNuke® Skin Technology: A DotNetNuke Design Challenge skin package submitted to the "Modern Standards" category by allsnnskins. It's compatible with common browsers such ...DotNetNuke® Skin Unravel: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Salar Golestanian of SalarO. This is a pure CSS skin wit...E! - ECMAScript Runtime Environment: E! (pronounced E-Bang) is a lightweight runtime environment for editing basic ECMAScript scripts with access to .NET Framework class libraries.Easy ArcGIS Library: Easy ArcGIS Library is a set of C# .net classes that wrap the common functionality of ArcObjects, that help ArcGIS developers do a lot of common fu...File Categorizer: The File Categorizer will help people tag the files on their system for easy searching. Instead of keyword searches, you can find files based on v...GMFS Cosmos: This is a file system for Cosmos a OS that was built with C# and we will be implementing this for windows and linuxIFilter Core Implementation (interface and structures): IFilter C# implementation for you to embed when writing Windows Search capabilities into your application.Image Wall Control for Silverlight: A control for Silverlight that emulates the wall of images in the Zune. imenik_za _dev4fun: imenik is a very simple program and easy to use where you can save and organise your contacts.LegoPhysX: LegoPhysX is an atomic based physics enginePersonal Accounting: Personal system for managing financial accounts, which supports multiple accounts in different currencies. It has movement imputation and basic que...Pipes & Filters Engine: The Pipes & Filters Engine allows you to process a sequence of separate operations (filters) asynchronously in a multi-threaded manner. Filters wil...Prerequisites Checker: Check preqrequisites for software. Example: Software S1 is delivered. S1 has prerequisites PR1, PR2... PRN You may load the config file for S...Puzzle Lib: A library for creating grid-and-tile puzzles. Includes two separate UIs for the Tetriminoes puzzle as examples.QuotesPlugin for Windows Live Writer: The QuotesPlugin for Windows Live Writer lists quotes from web sites such as quotes4all.net. It's very easy for you to select your favourite ones a...RobiJ2se: Robi j2se Learning!SkinEngine: This is a Skin Framework for C# Winform, It use easy.and Create Skin GreatSQL Azure .NET Connection: This is a demo application that shows how to connect with SQL AzureSupermarket Soft: WPF Application that helps you manage your supermarket shoppings.Tally Marks for Windows Phone 7 Series: Tally Marks is a counting application. It can count almost anything you'd like to count, and it does it with tally marks! Count the number of peo...TwitCast: TwitCast is a simple notifier for Twitter using the [url:http://linqtotwitter.codeplex.com/] LINQ 2 Twitter library.WodnySwiat: Projekt grupowy wodny światWSS Task Manager Activity: A custom task creation activity that can be used in a sequential or state machine workflow. The activity was specifically developed to handle task ...New ReleasesAddress Book: Address Book: Address BookAutoAudit: AutoAudit 1.10c: Veresion 1.10 includes most of the bug fix requests. adds createdby and modifiedby columns to the audited base tables. If the user name is set by...blog for umbraco 4: Blog 4 Umbraco 2.0.26: Fixes: -Regex bug in base -Directory urls and rss link bug -Open reader bug -Rss bugDotNetNuke® Skin City: City Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by allsnnskins. We integrate orange color and black colour in this ...DotNetNuke® Skin Dawn: Dawn Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by allsnnskins. This design reflects the theme of daylight. U...DotNetNuke® Skin Dream: Dream Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by WhNuke. Uses the DNNJDMenu skin object.DotNetNuke® Skin Expression: Expression Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Salar Golestanian of SalarO. This is a pure CSS skin with ...DotNetNuke® Skin ModernBiz: ModernBiz Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by allsnnskins. This simple and unaffected company skin uses...DotNetNuke® Skin Profound: Profound Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by WhNuke Technology. This skin is simple and clean and the ...DotNetNuke® Skin Technology: Technology Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Standards" category by allsnnskins. It's compatible with common browsers such a...DotNetNuke® Skin Unravel: Unravel Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Salar Golestanian of SalarO. This is a pure CSS skin with...E! - ECMAScript Runtime Environment: E! beta 1: This is really meant as a learning project for playing with dynamically compiled code, so you'd be better off getting the source code.Easy ArcGIS Library: EAGL Binaries: Easy ArcGIS Library Last Build (Version 1.1.2.4139)Easy ArcGIS Library: EAGL Binaries And Documentation: EAGL Latest Build With DocumentationEasy ArcGIS Library: EAGL Documentation: EAGL 1.1.2.4139 DocumentationEnterprise Library Extensions: Release 1.1: This is a service release for version 1.0 The installation process now works as intended. The assemblies are now visible in the Visual Studio As...Family Tree Analyzer: Version 1.2.1.0: Version 1.2.1.0 Fixed GB radio button not working renamed UK Added fixes for UK regions/shires/counties where country is missing Add country reco...Family Tree Analyzer: Version 1.3.0.0: Version 1.3.0.0 Added IGI Search results viewer Tweaked filenames of IGI search so that results window has more informative displayFile Archive: File Archive: If your computer is only word processing machine or document merge machine, this program is really fit for you. It's so...o useful! This program ar...GameStore League Manager: League Manager 1.0.4: Fixes bug 7434. Changed version number to the standard format of Major.Minor.ReleaseIFilter Core Implementation (interface and structures): Stable release: First release of interface implementation.IFilter Core Implementation (interface and structures): System.Search.Core: Ifilter interface for implementation in your own Search Providers.imenik_za _dev4fun: imenik_aplikacija: imenik aplikacija is an application easy to use where you can save and organise your contacts.KDRE - kernel debugger regular expression extension: KDRE 0.0.2: KDRE - Windbg regexp extension Changes: - amd64 build addedMapWindow6: MapWindow 6.0 msi (March 17): This release introduces some minor tweaks to the source code exposing more buffering functionality. This also fixes a problem with selecting point...MockingBird: MockingBird_2.0_RC: This is the V2.0 RC release. The documentation includes notes about the WCF components. Check this blog post for more details about the release. ...MPF for Projects - Visual Studio 2010: Visual Studio 2010 - Final Release: This contains the source code for the release of MPF for Projects corresponding to Visual Studio 2010. For Beta 2, you will need the Beta 2 release...Physics Helper for Silverlight, WPF, Blend, and Farseer: PhysicsHelper 3.0.0.4 ALPHA: This is an initial release that supports Windows Phone 7 Series Development, along with the Silverlight 3 and WPF support. It requires Visual Studi...Pocket GPW: Pocket GPW 1.2: Modyfikacje wg. change set-a 56678. Poprzednia baza danych (z wersji 1.1) jest zgodna z aktualną. Przed instalacją skopiuj poprzednią bazę danych ...Prerequisites Checker: Prerequisites Checker: Check your software prerequisitesPuzzle Lib: Puzzle Lib examples: Tetriminoes examples using a common Puzzle LIB and common Puzzle Implementation library, demonstrating a basic MVC architecture for game developmentRoTwee: RoTwee (8.0.7.0): Now you can rotate tweets by your hand !SharePoint Icon Integration: SharePoint Icon Integration PDF: This is the first stable release of the SPIconIntegration. To install the PDF Icon integration just start the setup.exe file that you will find in ...SkinEngine: SkinEngine-Src-2010-03-17: this is a release on 2010-03-17Spell Corrector: Spell Corrector 0.2 Binary: Fixed a bug in the word indexing in the database.Spell Corrector: Spell Corrector 0.2 Code: Fixed a bug in the indexing of the words in the database. Now insertion of new words in the database is faster.SQL Azure .NET Connection: LittleBlackBook.NET Release 1.0: This was a demo project for a SQL Azure Presentation at ConfooSQL Server Extended Properties Quick Editor: New release 1.5.5: Whats new: Move preferences to application settings and add a form to edit preferences. Support to add, modify and delete operations could be made ...SuperModel - A Dynamic View-Model Generator: 1.0.0.1 - Tyra+: Resolving a couple of bugs; models generated using INotifyPropertyChanged were not being created correctly. Property resolution on proxied types w...Survey - web survey & form engine: Survey 1.2.0: The Survey 1.2.0 release is based on the original sources of the Nsurvey 1.9 application. Compared to the Survey 1.1.0 version many new features ...T.S.T. the T-SQL Test Tool: Version 1.5: Version 1.5 changes: Bug fix. In V1.4 and earlier table comparison failed if the tables compared had columns with spaces in them.TwitCast: TwitCast 1.0.0.0: First release of TwitCast. Be warned that this is just a development release and there are a lot of things that remain to be done.unbinder: Unbound.dll: from change set ef6f2303dd32VCC: Latest build, v2.1.30317.0: Automatic drop of latest buildWatchersNET.TagCloud: WatchersNET.TagCloud 01.02.00: Whats New Show only Tags from Pages the Current User has View Acess (As Option) A Url can be specified for a Custom tag Added Module Package fo...WSS Task Manager Activity: 1.0: Download either the source for Moss Task Manager Activity, Workflow sample if you are interested to see how to use the activity in the workflow or ...XML pretty print for python (xmlpp): version 0.92b: Fixes issues when element name contains :Xpress - ASP.NET MVC 个人博客程序: xpress2.1.1.0317.beta: 最新beta版 更改内容： 模板与系统所需配置文件移动到App_Data中 Service对象注入到Controller中 Controller对象放入IOC容器中 邮件发送BUG修正Most Popular ProjectsMetaSharpRawrWBFS ManagerSilverlight ToolkitASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsLINQ to TwitterRawrOData SDK for PHPDirectQOpen Data App Framework (ODAF)patterns & practices – Enterprise LibraryBlogEngine.NETjQuery Library for SharePoint Web ServicesMapWindow6NB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

• CodePlex Daily Summary for Saturday, March 17, 2012

  CodePlex Daily Summary for Saturday, March 17, 2012Popular ReleasesAutoSPEditor: AutoSPEditor Installer: Installs the current version of the AutoSPEditor using ClickOnce. Your application will be updated automatically.Javascript .NET: Javascript .NET v0.6: Upgraded to the latest stable branch of v8 (/tags/3.9.18), and switched to using their scons build system. We no longer include v8 source code as part of this project's source code. Simultaneous multithreaded use of v8 now supported (v8 Isolates), although different contexts may not share objects or call each other. 64-bit .Net 4.0 DLL now included. (Download now includes x86 and x64 for both .Net 3.5 and .Net 4.0.)MyRouter (Virtual WiFi Router): MyRouter 1.0.6: This release should be more stable there were a few bug fixes including the x64 issue as well as an error popping up when MyRouter started this was caused by a NULL valuePulse: Pulse Beta 4: This version is still in development but should include: Logging and error handling have been greatly improved. If you run into an error or Pulse crashes make sure to check the Log folder for a recently modified log file so you can report the details of the issue A bunch of new features for the Wallbase.cc provider. Cleaner separation between inputs, downloading and output. Input and downloading are fairly clean now but outputs are still mixed up in the mix which I'm trying to resolve ...Google Books Downloader for Windows: Google Books Downloader-2.0.0.0.: Google Books DownloaderFinestra Virtual Desktops: 2.5.4501: This is a very minor update release. Please see the information about the 2.5 and 2.5.4500 releases for more information on recent changes. This update did not even have an automatic update triggered for it. Adds error checking and reporting to all threads, not only those with message loopsAcDown????? - Anime&Comic Downloader: AcDown????? v3.9.2: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Release Candidate: Your feedback is welcome - and this is your last chance to get your fixes in for this version! Includes installer for both Feature Server extension and Desktop extension, enhanced functionality for the Desktop tools, and enhanced built-in Javascript Editor for the Feature Server component. This release candidate includes fixes to beta 4 that accommodate domain users for setting up the Server Component, and fixes for reporting/uploading references tracked in the revision table. See Code In-P...C.B.R. : Comic Book Reader: CBR 0.6: 20 Issue trackers are closed and a lot of bugs too Localize view is now MVVM and delete is working. Added the unused flag (take care that it goes to true only when displaying screen elements) Backstage - new input/output format choice control for the conversion Backstage - Add display, behaviour and register file type options in the extended options dialog Explorer list view has been transformed to a custom control. New group header, colunms order and size are saved Single insta...Windows Azure Toolkit for Windows 8: Windows Azure Toolkit for Windows 8 Consumer Prv: Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v1.2.1Minor updates to setup experience: Check for WebPI before install Dependency Check updated to support the following VS 11 and VS 2010 SKUs Ultimate, Premium, Professional and Express Certs Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v1.2.0 Please download this for Windows Azure Toolkit for Windows 8 functionality on Windows 8 Consumer Preview. The core features of the toolkit include:...Facebook Graph Toolkit: Facebook Graph Toolkit 3.0: ships with JSON Toolkit v3.0, offering parse speed up to 10 times of last version supports Facebook's new auth dialog supports new extend access token endpoint new example Page Tab app filter Graph Api connections using dates fixed bugs in Page Tab appsCODE Framework: 4.0.20312.0: This version includes significant improvements in the WPF system (and the WPF MVVM/MVC system). This includes new styles for Metro controls and layouts. Improved color handling. It also includes an improved theme/style swapping engine down to active (open) views. There also are various other enhancements and small fixes throughout the entire framework.ScintillaNET: ScintillaNET 2.4: 3/12/2012 Jacob Slusser Added support for annotations. Issues Fixed with this Release Issue # Title 25012 25012 25018 25018 25023 25023 25014 25014 Visual Studio ALM Quick Reference Guidance: v3 - For Visual Studio 11: RELEASE README Welcome to the BETA release of the Quick Reference Guide preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation ...AvalonDock: AvalonDock 2.0.0345: Welcome to early alpha release of AvalonDock 2.0 I've completely rewritten AvalonDock in order to take full advantage of the MVVM pattern. New version also boost a lot of new features: 1) Deep separation between model and layout. 2) Full WPF binding support thanks to unified logical tree between main docking manager, auto-hide windows and floating windows. 3) Support for Aero semi-maximized windows feature. 4) Support for multiple panes in the same floating windows. For a short list of new f...Windows Azure PowerShell Cmdlets: Windows Azure PowerShell Cmdlets 2.2.2: Changes Added Start Menu Item for Easy Startup Added Link to Getting Started Document Added Ability to Persist Subscription Data to Disk Fixed Get-Deployment to not throw on empty slot Simplified numerous default values for cmdlets Breaking Changes: -SubscriptionName is now mandatory in Set-Subscription. -DefaultStorageAccountName and -DefaultStorageAccountKey parameters were removed from Set-Subscription. Instead, when adding multiple accounts to a subscription, each one needs to be added ...IronPython: 2.7.2.1: On behalf of the IronPython team, I'm happy to announce the final release IronPython 2.7.2. This release includes everything from IronPython 54498 and 62475 as well. Like all IronPython 2.7-series releases, .NET 4 is required to install it. Installing this release will replace any existing IronPython 2.7-series installation. Unlike previous releases, the assemblies for all supported platforms are included in the installer as well as the zip package, in the "Platforms" directory. IronPython 2...Kooboo CMS: Kooboo CMS 3.2.0.0: Breaking changes: When upgrade from previous versions, MUST reset the all the content type templates, otherwise the content manager might get a compile error. New features Integrate with Windows azure. See: http://wiki.kooboo.com/?wiki=Kooboo CMS on Azure Complete solution to deploy on load balance servers. See: http://wiki.kooboo.com/?wiki=Kooboo CMS load balance Update Jquery and Jquery ui to the lastest version(Jquery 1.71, Jquery UI 1.8.16). Tree style text content editing. See:h...Extensions for Reactive Extensions (Rxx): Rxx 1.3: Please read the latest release notes for details about what's new. Related Work Items Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many wrappers that convert asynchronous Framework Class Library APIs into observables. Many useful types such as ListSubject<T>, DictionarySubject<T>, CommandSubject, ViewModel, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T>, Scala...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.47: Properly output escaped characters in CSS identifiers throw an EOF error when parsing a CSS selector that doesn't end in a declaration block chased down a stack-overflow issue with really large JS sources. Needed to flatten out the AST tree for adjacent expression statements that the application merges into a single expression statement, or that already contain large, comma-separated expressions in the original source. fix issue #17569: tie together the -debug switch with the DEBUG defi...New ProjectsCOBOL Bubble Sort: The famous Bubble Sort algorithm using COBOLCross Site Media Dashboard (webpart) for SharePoint video content: View video content in easy to configure dashboard structure. Supports a vast range of video formatsDataObjects.Net Samples: DataObjects.Net SamplesDev Tracking Tool: Dev Tracking Tool is thought to help software developers keeping track of their activities in a fast way, and use these informations for later update of tasks in other informatic systems (i.e.: tracking tasks in TFS and/or other tracking tools).Governance Checklist - Create/manage your Governance Checklist: Governance Checklist - Create/manage your Governance Checklist. SharePoint Governance Checklist generated as a starting point however you can update to your own criteria. Visual Guages to show the status of your governance progresslibspotify.NET - a managed interop library for libspotify: libspotify.NET is a simple interop wrapper library for libspotify written in C#. It enables .NET developers to write applications that can browse, search, and stream digital music from the Spotify platform. This project is compatible with libspotify API version 10.1.16. Requires libspotify.dll, a Spotify premium account, and an application API key. More info on the libspotify API at http://developer.spotify.com/en/libspotify/overview/ Media.Net: All-In-One Media Player for Windows XP, Vista, Windows 7 and Windows 8.MisTutoriales: MisTutoriales Ejemplos de programación.mobile video: mobile videoMugen MVVM Toolkit: Mugen MVVM Toolkit makes it easier to develop Silverlight, WPF and WP7 applications using the Model-View-ViewModel design pattern. It is very easy to use. It combines the pattern of DI (dependency injection) and MVVM (Model-View-ViewModel).Project SIMPLE Orca: SIMPLE makes it easier for non-programmers to create simple applications. You'll no longer have to learn an entire language in order to create that simple application you've been stressing over. S imple And I deal M acroed P rogramming L anguage For E aseRelational data Transfer Application: Relational data Transfer Application helps to move data scenarios from One relational database to other Relational database without moving entire tables. Basically this applciation moves a given data row along with its relational data to destination database. rGUI: rGUI is an open source .NET front-end for Robocopy written in C#. It is designed for users already familiar with the Robocopy command-line switches and what they do, but who want the command parameters presented in a visual way.S#: Spontaneous Sharp: A mix of very easy to use c# libraries, born out of spontaneous needs to simplify a large number of programming tasks in .NET C#.SDF - Smart Document Framework: Smart Document Framework offers an alternative to the FlowDocument which provides a simpler rendering engine and allows for better pagination.Shatong: Shatong SystemSPD 2007 Custom Activity Pause Until CheckOut = None: This activity can be added to the beginning of a SharePoint Designer 2007 workflow to pause the workflow until the item is no longer checked out (soft or hard checkout)Spontaneous XNA Library (SXL): Yet another XNA Library that has arisen from various spontaneous needs. Hopefully it can be as helpful to others as it has been to me.TeaFiles.Net - time series storage: TeaFiles.Net is an API for TeaFiles that makes it easy to store and exchange time series data between .Net programs and C++, Python, R and other applications. Written in C#. Find more details about the file specification, other APIs and tools at discretelogics.comTypePipe: TypePipe allows you to modify existing CLR types using a simple, expression-based API. Modifications from several tools and libraries (AOP, IoC etc.) can be combined. Types are generated via Reflection.Emit or user-defined back-ends.UCB_12_1: This is a research projectUCB_12_2: UCB_12_2UCB_12_3: UCB_12_3UCB_12_4: UCB_12_4UCB_12_Common: UCB_12_CommonVG Task Manager: task manager demo project created by Vivek Gupta.WP7 Map Control: Lightweight universal map control for Windows Phone 7xRM#: xRM# is focused on boosting productivity while developing JavaScript customizations for Microsoft Dynamics CRM 2011. xRM# provided a platform to scribble code in C# and translating them to JavaScript snippet for xRM customizations. Developers can benefit from structural and coherent flow of using existing C# coding guidelines. Pseudo data types, IntelliSense and Code Documentation reduce code look-ups and increase productivity. xRM# also supports deploying generated scripts as minified ver...

  Read the article

• CodePlex Daily Summary for Friday, June 03, 2011

  CodePlex Daily Summary for Friday, June 03, 2011Popular ReleasesMedia Companion: MC 3.404b Weekly: Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. Refer to the documentation on this site for the Installation & Setup Guide Important! *** Due to an issue where the date added & the full genre information was not being read into the Movie cache, it is highly recommended that you perform a Rebuild Movies when first running this latest version. This will read in the information from the nfo's & repopulate the cache used by MC during operation. Fi...Terraria Map Generator: TerrariaMapTool 1.0.0.4 Beta: 1) Fixed the generated map.html file so that the file:/// is included in the base path. 2) Added the ability to use parallelization during generation. This will cause the program to use as many threads as there are physical cores. 3) Fixed some background overdraw.DotRas: DotRas v1.2 (Version 1.2.4168): This release includes compiled (and signed) versions of the binaries, PDBs, CHM help documentation, along with both C# and VB.NET examples. Please don't forget to rate the release! If you find a bug, please open a work item and give as much description as possible. Stack traces, which operating system(s) you're targeting, and build type is also very helpful for bug hunting. If you find something you believe to be a bug but are not sure, create a new discussion on the discussions board. Thank...Ajax Minifier: Microsoft Ajax Minifier 4.21: Fixed issues #15949 and #15868. Tweaked output in multi-line (pretty-print) mode so that var-statements in the initializer of for-statements break multiple variables onto multiple lines. Added TreeModification flag (and can now therefore turn off) the behavior of removing quotes around object literal property names if the names can be valid identifiers. Convert true literals to !0 and false literals to !1. Added a Visitor class approach to iterating over a generated abstract syntax tree to he...Caliburn Micro: WPF, Silverlight and WP7 made easy.: Caliburn.Micro v1.1 RTW: Download ContentsDebug and Release Assemblies Samples Changes.txt License.txt Release Highlights For WP7A new Tombstoning API based on ideas from Fluent NHibernate A new Launcher/Chooser API Strongly typed Navigation SimpleContainer included The full phone lifecycle is made easy to work with ie. we figure out whether your app is actually Resurrecting or just Continuing for you For WPFSupport for the Client Profile Better support for WinForms integration All PlatformsA power...VidCoder: 0.9.1: Added color coding to the Log window. Errors are highlighted in red, HandBrake logs are in black and VidCoder logs are in dark blue. Moved enqueue button to the right with the other control buttons. Added logic to report failures when errors are logged during the encode or when the encode finishes prematurely. Added Copy button to Log window. Adjusted audio track selection box to always show the full track name. Changed encode job progress bar to also be colored yellow when the enco...AutoLoL: AutoLoL v2.0.1: - Fixed a small bug in Auto Login - Fixed the updaterEPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.9.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the server This version has been updated to .Net Framework 3.5 New Features Data Validation. PivotTables (Basic functionalliy...) Support for worksheet data sources. Column, Row, Page and Data fields. Date and Numeric grouping Build in styles. ...and more And some minor new features... Ranges Text-Property|Get the formated value AutofitColumns-method to set the column width from the content of the range LoadFromCollection-metho...jQuery ASP.Net MVC Controls: Version 1.4.0.0: Version 1.4.0.0 contains the following additions: Upgraded to MVC 3.0 Upgraded to jQuery 1.6.1 (Though the project supports all jQuery version from 1.4.x onwards) Upgraded to jqGrid 3.8 Better Razor View-Engine support Better Pager support, includes support for custom pagers Added jqGrid toolbar buttons support Search module refactored, with full suport for multiple filters and ordering And Code cleanup, bug-fixes and better controller configuration support.Nearforums - ASP.NET MVC forum engine: Nearforums v6.0: Version 6.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Authentication using Membership Provider for SQL Server and MySql Spam prevention: Flood Control Moderation: Flag messages Content management: Pages: Create pages (about us/contact/texts) through web administration Allow nearforums to run as an IIS subapp Migrated Facebook Connect to OAuth 2.0 Visit the project Roadmap for more details.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.8b: Changes: - fix critical issue 15922(AccessViolationException) once and for all ...update is strongly recommended Known Issues: - some addin ribbon examples has a COM Register function with missing codebase entry(win32 registry) ...the problem is only affected to c# examples. fixed in latest source code. NetOffice\ReleaseTags\NetOffice Release 0.8.rar Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:...................Facebook Graph Toolkit: Facebook Graph Toolkit 1.5.4186: Updates the API in response to Facebook's recent change of policy: All Graph Api accessing feeds or posts must provide a AccessToken.Serviio for Windows Home Server: Beta Release 0.5.2.0: Ready for widespread beta. Synchronized build number to Serviio version to avoid confusion.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta4: ??AcDown?????????????，??????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta4 2011-5-31?? ???Bilibili.us????? ???? ?? ???"????" ???Bilibili.us??? ??????? ?? ??????? ?? ???????? ?? ?? ???Bilibili.us?????(??????????????????) ??????(6.cn)?????(????) ?? ?????Acfun?????????? ?????????????? ???QQ???????? ????????????Discussion...CodeCopy Auto Code Converter: Code Copy v0.1: Full add-in, setup project source code and setup fileWordpress Theme 'Windows Metro': v1.00.0017: v1.00.0017 Dies ist eine Vorab-Version aus der Entwickler-Phase. This is a preview version from the development phase.TerrariViewer: TerrariViewer v2.4.1: Added Piggy Bank editor and fixed some minor bugs.Kooboo CMS: Kooboo CMS 3.02: Updated the Kooboo_CMS.zip at 2011-06-02 11:44 GMT 1.Fixed: Adding data rule issue on page. 2.Fixed: Caching issue for higher performance. Updated the Kooboo_CMS.zip at 2011-06-01 10:00 GMT 1. Fixed the published package throwed a compile error under WebSite mode. 2. Fixed the ContentHelper.NewMediaFolderObject return TextFolder issue. 3. Shorten the name of ContentHelper API. NewMediaFolderObject=>MediaFolder, NewTextFolderObject=> TextFolder, NewSchemaObject=>Schema. Also update the C...mojoPortal: 2.3.6.6: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2366-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Terraria World Creator: Terraria World Creator: Version 1.01 Fixed a bug that would cause the application to crash. Re-named the Application.New Projects"Background Transfer Service Sample" From WP7 Sample: This project is an extension to existing Windows Phone7 sample available from MS sight ("Background Transfer Service Sample"). This project extends functionality to display the background downloaded item to verify download conten. Agile project and development management dashboard - Meter Console: Agile project and development management dashboard application. The focus of this application to bridge the gap between the management, clients and developer and chive best possible transparency. Ajax Multi-ListBox: Ajax Multi-ListBox is .NET C# written user control with a dual listbox that uses ajax to move items from left to right and vice versa.aLOG : Asynchronous logging (Logging Library): aLog is an asynchronous logging component built on Microsoft Enterprise Exception handling and Logging Component block. It allows application to asynchronously log the data in multiple data sources such as file system, database , XML. Application Base Component Library: Application Base Component LibraryConcise Service Bus: A compact but comprehensive WCF service bus framework.Contour provider for Umbraco Courier: Transfer Umbraco Contour forms between Umbraco instances with Courier.CoveyNet MidWest: CoveyNet MidWestCSharp Samples: This contain C#- wpf, wcf, linqtosql, some basic oops stuff etc.DotNet1: DotNet1FireWeb: fefaesfrafasGeoCoder: Basic server side GeoCoder which accesses Google, YAHOO etc. This is developed in C# and is a mix of language styles, just depended what I was doing that week. All the libraries include tests which can be used to check if the libraries still work, it's worth doing this as the consumed webservices may change from time to time. GrandReward: GrandReward is designed to help young and old people to learn by answer questions. It is easy to use and the community can design own topic files for own questions to learn. The project is develop in C# and contains some WPF views. The project homepage is: http://grand-reward.com/helferlein: The helferlein library contains some web controls and tools I used in other projects.helferlein_BabelFish: helferlein_BabelFish is a DNN module to support multilingual features for other helferlein modules. It is developed in C#.helferlein_Form: helferlein_Form is an easy-to-use module for DotNetNuke that allows creating forms. The submissions can be sent by e-mail and/or stored in a database. It's developed in C#.ILSpy/Silverlight — Proof Of Concept: ILSpy refactoring (dire hacking) to make it work in Silverlight.ISGProject: ISGProjectMarcelo Rocha: Trabalhos acadêmicos, Apresentações, Projetos e outras Invencionices de Marcelo Rocha.MosquitoOnline: MosquitoOnline ProjectNET.Studio: Ein kleines Visual Studio für die SchuleOmegle Desktop Client: A desktop client for the anonymous chat site, Omegle. Designed to combat some of the shortcomings of the webpage, the desktop client will have no adverts, and be able to flash the taskbar window, and play a sound on message received. Online PHP IDE: Free Open Source online editor for working with files on FTP. Free and easy deployment.Open JGL: A utillity library using OpenGL, which focus' on graphics and vertex control.Open Tokenization Server: Open Tokenization Server is a simplistic implementation of a tokenization data security service. It allows users to create and retrieve tokens that represent sensitive information.OurCodeNights: Just some small projects we "work" on at our codenights. A good excuse to meet and have a good time ;)Raple: Raple is simple programming languageSea: Set of C# Extension libraries that make life easier.Shai Chi: Shai ChiSharePoint Sandbox Logging: SharePoint Sandbox Logging enables developers and solution designers to easily log events to logging list in your site collection, allowing you to easily trace errors on custom solutions within your site collection, with no need for server access. Perfect for sandbox / Office365. This project contains one sandbox solution with a site collection logging feature. When feature is active - it creates the list and logs. If it is not active - it does not log. Simple. It also contains a sampl...SharePoint Stock Ticker: SharePoint Stock Ticker is a SharePoint 2010 project which consists of a SharePoint Stock Ticker Web Part driven off of Google's Stock API. The width of this Web Part was developed to fit within the default SharePoint 2010 Quick Launch navigation. This has also been tested to run over http and https SharePoint 2010 farms and will not throw a mixed content warning with Internet Explorer.SharpLinx: SharpLinx is an open source social networking application on ASP.Net.Single.Net - less Copy & Paste,less code lines,more easier: make your code life easierSqlMyAdmin: A projecto to create a PHPMyAdmin clone app that access Sql Server.TDB: TDB is a NOSQL Key-value store entirely designed to run in windows environment. It's directly inspired by Redis project and use Redis' command sematincs and Redis' communication protocol to maintain a base compatibility with it.Tomasulo: A simulator of Tomasulo CDB dynamic instruction scheduling algorithm in Java. Authors: Mengyu Zhou @J85 Zhenyao Zhu @J85 Jun Li @J81 @Tsinghua UniversityTransport Broker Management System: Transport Management system will serve the small freight brokers manage the carriers and orders. It has features like manage truck owners, carriers, source, destination, orders. Verification system for MCBS: Verification system for mobile communication base station.VietCard: VietCardVkontakte File converter: ????????? ?????? ??? ???????? ?? ? "?????????" vkontakte.ru. VSGesture for Visual Studio: VSGesture can execute command via mouse gestures within Visual Studio2010. If you have any feedback, please send me an email to powerumc at gmail.com.WCF-Silverlight Helper: Class library to generate WCF DataContractSerializer-serializable and Silverlight (SL) -compatible classes. Useful, for example, if you have an assembly with classes that fail to serialize with DataContractSerializer. T4 Templates are used to auto-generate code.Windows Phone eBook Samples: Windows Phone eBook Samples is a collection of samples associated with the Windows Phone eBoom community initiative.WinPreciousMetal: WinPreciousMetal helps people know the precious metal's states. Because I am a Chinese, my soft mainly focus at the price of metal in RMB.

  Read the article

• CodePlex Daily Summary for Wednesday, November 02, 2011

  CodePlex Daily Summary for Wednesday, November 02, 2011Popular ReleasesWYGIWYS Driver: 1.1.2.0 release: Win32, x86, kernel mode driver.Reset IPv6: 1.0.0.0: First release. Only works for Spanish and English operating system editions.BExplorer (Better Explorer): Better Explorer 2.0.0.631 Alpha: Changelog: Added: Some new functions in ribbon Added: Possibility to choose displayed columns Added: Basic Search Fixed: Some bugs after navigation Fixed: Attempt to fix slow navigation and slow start Known issues: - BreadcrumbBar fails on some situations - Basic search not work quite well in some situations Please if anyone find bugs be kind and report them at the Issue Tracker! Thanks!DotNetNuke® Community Edition: 05.06.04: Major Highlights Fixed issue with upgrades on systems that had upgraded the Telerik library to 6.0.0 Fixed issue with Razor Host upgrade to 5.6.3 The logic for module administration checks contains incorrect logic in 1 place, opening the possibility of a user with edit permissions gaining access to functionality they should not have through a particularly crafted url Security FixesBrowsers support the ability to remember common strings such as usernames/addresses etc. Code was adde...Terminals: Version 2.0 - Beta 2 Release: The team has finally put the nail into the official release date for version 2.0. As bugs are winding down on the 2.0 Roadmap we decided to push out another build - the first 2.0 Beta build. Please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Check the source code page on the site, this beta includes all commits since (and including) the 90428 check-in back i...iTuner - The iTunes Companion: iTuner 1.4.4322: Added German (unverified, apologies if incorrect) Properly source invariant resources with correct resIDs Replaced obsolete lyric providers with working providers Fix Pseudolater to correctly morph every third char Fix null reference in CatalogBaseTrack Folder Changes: Track Folder Changes 1.0: Track Folder Changes 1.0 (binary)Windows Workflow Foundation on Codeplex: Microsoft.Activities v1.8.8: Microsoft.Activities Overview How do I install Microsoft.Activities? Updates in this release9318Technical Analysis Engine for .NET: Technical Analysis Engine 1.25: What's new in the 1.25 release (2011-11-01): - Added Williams %R indicator - Added Moving Average Envelopes indicatorBF3Rcon.NET: BF3Rcon 3.0: This release is targeted for RCON documentation based on R3. Everything should be beta stable, but it's alpha because I haven't been able to fully test it. When a stable release is ready, a proper changelog will be kept. Important Edit: There's one method that will keep this from working in Mono. GeneratePasswordHash uses void HashAlgorithm.Dispose(), which isn't in Mono. This will have to be changed to Clear() in the next release. If anyone needs a Mono version of this immediately, you can...BoxWorld: BoxWorld_2011.10.30: BoxWorld - 8.0.1110.30 This is the initial release of BoxWorld. I'd recommend downloading the installer as it contains the compiled code and everything all nicely contained. By default, you end up with this directory structure: C:\Program Files\ViperWorks\BoxWorld C:\Program Files\ViperWorks\BoxWorld\Data C:\Program Files\ViperWorks\BoxWorld\Interface C:\Program Files\ViperWorks\BoxWorld\Source In the root you have the compiled EXE files, one for the main release, one for the LITE release ...VidCoder: 1.2.1: Fixed a couple regressions: video encoder was blank in queue and crashes with the High Profile preset when opening the Settings window. Fixed problem with auto-update introduced in 1.2.0. If you have 1.2.0 you will need to update manually to get this.Koober: Koober - The Ebook Creator 0.2: The official release of Koober as Open source. Koober is a ebook creator for Windows, and Koob Reader is the reader.patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Media Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.AcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.33: Add JSParser.ParseExpression method to parse JavaScript expressions rather than source-elements. Add -strict switch (CodeSettings.StrictMode) to force input code to ECMA5 Strict-mode (extra error-checking, "use strict" at top). Fixed bug when MinifyCode setting was set to false but RemoveUnneededCode was left it's default value of true.New ProjectsAlgorithms: algorithms, ACM C++ programs, Electronic design automation algorithmsAll-In-One: Ein Programm - Alle Funktionen Einfach Komponente erstellen - und schon gibt es eine Funktion mehr!Bar Code File Copy: Bar Code File Copy is a mobile app that allows user to initiate file transfer from a PC to another with the help of barcodes and Windows Phone 7.BlekBoox: Google Books API CF-Soft: this is my workspace to study C# programming.CodePaste.NET Tray Application: A simple tray application to create snippets on CodePaste.NET. Right click the app and select New Snippet. A snippet will be created, the contents of your clipboard will be pasted and your clipboard will be replaced with the URL after the code snippet is successfully posted.Common libs of fanthos: Fanthos.Libs.Controls provides panel and button with special draw and special events. Fanthos.Libs.Network provides class that you can use the method likes Async WCF in dotNet 2.0.Database Filesystem: The DBFS project implements a filesystem paradigm to the storage of objects in a database. The primary development language is Visual Basic .NET.Destructible Texture2D: The project shows how to create a destructible texture2D in XNA. This project is developed using the XNA framework and C# programming languageEject and Close CD Tray: For some reason i cannot seem to find any command line program to eject or close the cd tray. So i've created my own version and sharing it for everyone to use. It is an extremely simplistic program with the sole aim of ejecting or closing the cd tray and nothing else.Excel add-in for pricing options: Price options using various distributions.FDFToolkit .NET: FDFToolkit .NET makes it easier to read, write, create, populate, merge FDF, XDP, XFDF, and XML data with Acrobat and LiveCycle PDF forms. FDFToolkit.net utilizes iTextSharp 4.x technologies, under MPL license.Fiction Catalog: A catalog project designed to store information about fictional literature.Gangbee Software: This is customized version of Nopcommerce 1.9Guess Number: This simple program is letting you to guess number from 1 to 20. H? th?ng Khách s?n: H? th?ng qu?n lí khách s?nHelloTipi Photo Downloader: Permet de télécharger les photos en qualité original de votre site de famille [url:HelloTipi|http://www.hellotipi.com].Image Tagger & Resizer: Resize, and text in the lower right of picture with i.e. copyright information.Kinect Sensor Controller: A project using kinect sensor to control objectsKJFramework.Dynamic ??????: KJFramework.Dynamic ???????? KJFramework????????????????????，?????????: KJFramework.Dynamic(??????). ???????????????????????，???????????????，?????????， ????????????????????，????，???????????????，??????????(??，???????)。 ????，?????????????????????(Component), ??????DynamicDomainComponent??。 ??，????????????，???????????DynamicDomainService??。 ??????，???????????? ???????DynamicDomainService。 ??DynamicDomainService??，????????????????。 ?????, ????????????(Tunnel)???，??????(Tunnel)...Lan ETS Player Registration Software: This is the custom software that the Lan ETS staff uses to register people when they arrive at the LAN party.LINQ to Calil: LINQ to Calil ????? (http://calil.jp/) ???????? API ? LINQ ????????。???????????? LINQ ???????????????。.NET Framework 4 ???????、Silverlight ??????????。 LINQ to Calil ??????????????????????????????????????。Login Form in VB: <project name> makes it easier for <target user group> to <activity>. You'll no longer have to <activity>. It's developed in <programming language>.MbpGpsTester: MbpGpsTester is a gps test tool.Mi proyecto: Mi proyectoMy NuGET Packages: This project contains a custom program that allows you to quickly update NuGET packages from multiple sources and package feeds. It also contains set-up of some packages that are used by HydroDesktop.MyyoutubeforWp7: MyyoutubeforWp7 is a youtube application where users can search and view the videoNERO'S TOOLS: NEROS TOOLS will be an area of programming tools and resources for the automation control industry and the everyday usage of major control systems software.NetWebScript: NetWebScript is a IL to JavaScript compiler. It allow to write complex web application in C# or any other .Net language. It provide Visual Studio integration to debug into orginial sources. It allow to share code with server.Northern Lights WP7 Toolkit: Northern Lights WP7 Toolkit contains some common tools for WP7 Developers.SccmBoundaryHealthTool: .NET application that will search the AD forest for SCCM boundary configurations and report the following: * Overlapping boundaries, including those inter-boundary type, e.g. IP subnet overlaps with AD site. * Unassigned AD sites * Orphaned AD sites in SCCMSeven: Seven is a set of tools for programs development using the Oberon 07 language. SOAP Test Application (with EWS Tools): Application that allows testing of SOAP implementations, in particular Exchange Web Services.SocialCastDotNet: C# library for accessing the SocialCast APISosyal: Sosyal as.sqlce_perfDemo: just a bit of code to demonstrate sqlce insert performance on the desktop. I'm using sqlce on the desktop to persist data as its the fastest thing I can find. Insert perfromance seems to top out at around 65,000records/sec on my laptop but it also seems to limited at this point by my hard drive speeds. The sample code should be able to accept a dataTable, dataReader or dataset and persit to a sqlce database. Also in the code is a small wrapper on the sqlce connectionstring (localconne...SqlMon for OracleClient: This is a project to doing a tool just like Quest SQL Monitor that capture sql sentence in client side.So it's so cool that juect join in and user it. It's developed in C# and Visual Studio 2010 and bases on the EasyHook that is a powerfull .NET hook library.It injects in oci.dll and hook the "OCIStmtPrepare" function which excute before sql excuting,through the parameter "stms" we can get the sqltext and display itStackOverflow Offline Reader using a pdf reader: Using one or more keywords and number of questions to download, the app creates and displays a single pdf file of the questions and answers pertaining to the keyword(s). This enables the user to read questions in an offline manner or to read in a top/down fashion. std::streambuf wrapper for COM IStream: This provides a subclass of std::streambuf that wraps a COM IStream, so you can use an IStream with any C++ code that uses iostreams or the STL algorithms with a streambuf_iterator. It does no internal buffering whatsoever (I'd be happy to change this if someone needs it).step out ring signatures .net: Simple program to demonstrate how srs works in real world of .net.System Center Service Manager 2010 SP1 WCF and Web Service: Simple WCF Service and Web Service for SCSM 2010 SP1.System32 - SDK de componentes y acceso a datos para .NET: System32 - SDK de componentes y acceso a datos para .NET Taha Mail: A Java Web Based MailTest TDS: Test TFS - 1Track Folder Changes: Displays in real time a tree with the list of created/deleted/changed files in a specific directory and its subdirectoriesumbTrafficCentral: A plugin for Umbraco that adds robust and scalable handling of redirects, storing the data in the media library. WebDAV Test Application: Application to test WebDAV functionality.XnaXaml: XnaXaml allows you to add a XAML file to your Content Pipeline in XNA and edit straight from Visual Studio. It then takes the XAML file and parses through it to create mock objects that can be used to render controls to the screen in XNA. These mock objects can also be used to pass data to any GUI system you choose.???-?????????? ?? ????????????? ????????? ??????????? ??????? ???: Under construction

  Read the article

• CodePlex Daily Summary for Thursday, June 16, 2011

  CodePlex Daily Summary for Thursday, June 16, 2011Popular ReleasesTibiaPingFixer: TibiaPingFixer v.1.0: TibiaPingFixer v.1.0TerrariViewer: TerrariViewer v3.1 [Terraria Inventory Editor]: This version adds tool tips. Almost every picture box you mouse over will tell you what item is in that box. I have also cleaned up the GUI a little more to make things easier on my end. There are various bug fixes including ones associated with opening different characters in the same instance of the program. As always, please bring any bugs you find to my attention.CommonLibrary.NET: CommonLibrary.NET - 0.9.7 Beta: A collection of very reusable code and components in C# 3.5 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.7Documentation 6738 6503 New 6535 Enhancements 6583 6737DropBox Linker: DropBox Linker 1.2: Public sub-folders are now monitored for changes as well (thanks to mcm69) Automatic public sync folder detection (thanks to mcm69) Non-Latin and special characters encoded correctly in URLs Pop-ups are now slot-based (use first free slot and will never be overlapped — test it while previewing timeout) Public sync folder setting is hidden when auto-detected Timeout interval is displayed in popup previews A lot of major and minor code refactoring performed .NET Framework 4.0 Client...Terraria World Viewer: Version 1.3: Update June 15th Removed "Draw Markers" checkbox from main window because of redundancy/confusing. (Select all or no items from the Settings tab for the same effect.) Fixed Marker preferences not being saved. It is now possible to render more than one map without having to restart the application. World file will not be locked while the world is being rendered. Note: The World Viewer might render an inaccurate map or even crash if Terraria decides to modify the World file during the pro...MVC Controls Toolkit: Mvc Controls Toolkit 1.1.5 RC: Added Extended Dropdown allows a prompt item to be inserted as first element. RequiredAttribute, if present, trggers if no element is chosen Client side javascript function to set/get the values of DateTimeInput, TypedTextBox, TypedEditDisplay, and to bind/unbind a "change" handler The selected page in the pager is applied the attribute selected-page="selected" that can be used in the definition of CSS rules to style the selected page items controls now interpret a null value as an empr...Umbraco CMS: Umbraco CMS 5.0 CTP 1: Umbraco 5 Community Technology Preview Umbraco 5 will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out our first CTP of version 5 today! If you're new to Umbraco and would like to get a quick low-down on our popular and easy-to-learn approach to content management, check out our intro video here. What's in the v5 CTP box? This is a preview version of version 5 and includes support for the following familiar Umbr...Ribbon Browser for Microsoft Dynamics CRM 2011: Ribbon Browser (1.0.514.30): Initial releaseCoding4Fun Kinect Toolkit: Coding4Fun.Kinect Toolkit: Version 1.0Kinect Mouse Cursor: Kinect Mouse Cursor v1.0: The initial release of the Kinect Mouse Cursor project!patterns & practices: Project Silk: Project Silk Community Drop 11 - June 14, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Client Data Management and Caching" chapter. Updated "Application Notifications" chapter. Updated "Architecture" chapter. Updated "jQuery UI Widget" chapter. Updated "Widget QuickStart" appendix and code. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separat...Orchard Project: Orchard 1.2: Build: 1.2.41 Published: 6/14/2010 How to Install Orchard To install Orchard using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard.ashx. Web PI will detect your hardware environment and install the application. Alternatively, to install the release manually, download the Orchard.Web.1.2.41.zip file. http://orchardproject.net/docs/Manually-installing-Orchard-zip-file.ashx The zip contents are pre-built and ready-to-run. Simply extract the contents o...PowerGUI Visual Studio Extension: PowerGUI VSX 1.3.4: Changes - Got rid of suppressed exceptions on assemblies loading at project startup - Fixed Issue #28535 "No Print Support" - Enabled IntelliSence commands wich are supported by ActiPro Syntax Editor control: ToggleBookmark, NextBookmark, PreviousBookmark, ShowMemberList - Added missing Import directives in PS Script project template - Fixed exception occurring on debug start - Fixed an issue: after creating a new PS project, a debugging session hung being run for the second timeSnippet Designer: Snippet Designer 1.4.0: Snippet Designer 1.4.0 for Visual Studio 2010 Change logSnippet Explorer ChangesReworked language filter UI to work better in the side bar. Added result count drop down which lets you choose how many results to see. Language filter and result count choices are persisted after Visual Studio is closed. Added file name to search criteria. Search is now case insensitive. Snippet Editor Changes Snippet Editor ChangesAdded menu option for the $end$ symbol which indicates where the c...Mobile Device Detection and Redirection: 1.0.4.1: Stable Release 51 Degrees.mobi Foundation is the best way to detect and redirect mobile devices and their capabilities on ASP.NET and is being used on thousands of websites worldwide. We’re highly confident in our software and we recommend all users update to this version. Changes to Version 1.0.4.1Changed the BlackberryHandler and BlackberryVersion6Handler to have equal CONFIDENCE values to ensure they both get a chance at detecting BlackBerry version 4&5 and version 6 devices. Prior to thi...Rawr: Rawr 4.1.06: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta6: ??AcDown?????????????，?????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta6 ?????(imanhua.com)????? ???? ?? ??"????","?????","?????","????"?????? "????"?????"????????"?? ??????????? ?????????????? ?????????????/???? ?? ????Windows 7???????????? ????????? ?? ????????????? ???????/??????????? ???????????? ?? ?? ?????(imanh...Pulse: Pulse Beta 2: - Added new wallpapers provider http://wallbase.cc. Supports english search, multiple keywords* - Improved font rendering in Options window - Added "Set wallpaper as logon background" option* - Fixed crashes if there is no internet connection - Fixed: Rewalls downloads empty images sometimes - Added filters* Note 1: wallbase provider supports only english search. Rewalls provider supports only russian search but Pulse automatically translates your english keyword into russian using Google Tr...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.7: Version: 2.0.0.7 (Milestone 7): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...Windows Azure VM Assistant: AzureVMAssist V1.0.0.5: AzureVMAssist V1.0.0.5 (Debug) - Test Release VersionNew ProjectsASP.NET REST Services Framework: This framework provides capability to work with backend server-side .NET code via REST services from client-side javascript or other types of client code. REST-service component is a server-side framework that allows easy creation and working with REST services within any ASP.NET application. Ones a REST-service is defined it can be consumed via regular URL, or using client-side javascript call that resembles the standard C# style function call that is expected to be used within server-sid...ASP.NET, MVC, Learning: This project is for MojtabaSahraei's blog ResourceAuto Downloads Service: ADSrv (Auto Downloads Service) is a windows services (based on BITS) to add, remove and track downloads from several text files.BizTalk BDD Sample: This project is to go alongside the videos I have recently done about BDD and acceptance testing in BizTalk development.Bluvee Boxer: Video conveter for the WD TV Live Hub.Clomibep: PL: Zaawansowany system zarzadzania trescia Clomibep. EN: Advenced content managment system ClomibepCVPAT: CVPAT is a Process Automation ToolDigital Life Assistant Framework: DLAEF SharePoint 2010 web parts: SharePoint 2010 visual web parts ( SharePoint 2010 only ) Please change "Deploy.cmd" with the correct SharePoint site url, then run it from the SharePoint 2010 server.Entity Framework Query Visualizer: This is a visual studio debug visualizer for retrieving the SQL query generated by the Entity Framework at run time. In order to install this visualizer, you need to copy the downloaded DLL file ( EntityFrameworkLinqQueryVisualizer.dll ) to "C:\Users\<User Name>\Documents\Visual Studio 2010\Visualizers" folderHighYouth: HighYouthHMM-CMS: CMS pour le site HMMICompas: Sample startup siteKontrolDJNET: KontrolDJ.NET is: * A midi translator for KontrolDJ KDJ500 controller: This software is designed to work with Traktor Pro 2.0.1, Traktor Pro 1.0.1 or Traktor 3.4. (4 Decks support, Led feedback, Soft Takeover, ...) * An HID to Midi translator for all your gamepads, joysticks, ... This software is designed to work with Windows XP SP3, Vista and Seven. OS: Windows XP SP3, Vista and Seven (32 or 64bits). LevelZap: LevelZap is a Windows Explorer add-on that adds an item to the contextual menu on all folders allowing the user to "zap" the folder by moving all files/folders within it up one level, then deleting the folder itself. Works on Windows XP or later, both 32-bit and 64-bit versions.Locadora de Veiculos: Locadora de Veiculos - Projeto teste da pós graduaçãoMediator Framework: LINQ DataSource Integration FrameworkMetin2 Patcher: This project is a patcher. First Release Under ConstructionMVC Obsidian: Obsidian aims at creating a solid Quickstart solution for MVC3 projects.Orchard Delete Content Type: This Orchard modules provides a feature to delete dynamic content types.Osbourne Shell (Forth-like scripting language for .NET): I wrote it under the influence of LSD. There are a lot of architectural & codding mistakes and I do not want to even try to correct them. So, enjoy, lol.PowerShell EventLogWatcher Module: A PowerShell module that provides some additional functions to enhance PowerShell Eventing in relation to Windows Event Log events. Subscriptions can be made and actions taken when new events are written to a log. In a sense, this can be used as "poor mans" auditing system.Present it now!: PresentItNow allows to present the desktop to others on the LAN. Since SharedView does not work with IE9 and Netmeeting is not working on Vista/Windows 7 there is a need for a tool to be able to share the desktop with others on the LAN. This is a simple tool written in C#.Quadruple 128-bit Floating Point Library: 128-bit floating point library with 64 effective bits of precision (vs. 53 for the built-in Double type) and a 64 bit exponent (vs. 11 for Doubles). Greater range avoids under/overflows and makes log arithmetic unnecessary.Ribbon Browser for Microsoft Dynamics CRM 2011: This tool helps developer to browse ribbons in Microsoft Dynamics CRM. It makes easier to identify ribbon controls properties.Rsp.Windows.Forms: This project includes several custom Button types, Windows Form types, a numeric textbox and a custom MessageBox class. * RoundedButton - A button with rounded corners. * ShadedButton - A button with customizable shine. * ColorizedButton - A button with customizable Tint color for specified background image. * NumericTextBox - Textbox allowing only numeric input. * MsgBoxUI - Alternative to Windows MessageBox with a nicer look. * ShadowedForm - Windows form with a shadow. ...SocialTFS: SocialTFS is an extension of the Team Foundation Server which provides members of a global software team with information collected from Enterprise 2.0 applications, such as professional social networks and corporate microblogging. SocialTFS makes it easier for members of large distributed software teams to get in touch with each other, using corporate microblogging services (first StatusNet, then Yammer) and professional SNS profiles (Ohloh and LinkedIn). SocialTFS is part of a researc...SQLite Code Generator: Contains a stand alone GUI application and a Visual Studio Custom Tool for automatically generating a .NET data access layer code for objects in a SQLite database.Taste : state machines made easy: Taste is a lightweight state machine implementation for .NET. Its main purpose is to simplify the implementation of complex ViewModels in WPF and Silverlight applications, where the code to execute, the commands to enable and their effects depend on the current state of the View.Tau: TauTelerik MVC Music Store: This project has Telerik OpenAccess ORM as its database access logic and is entirely based of http://mvcmusicstore.codeplex.com/ . TextFileToGrid: This is the library made specifically to render the text file data stored in tabular form into data grid view.TFS Scrumboard: TFS Scrumboard is an extension to TFS 2010 Web Access, providing easy planning and managing of workitem progress.Umbraco Advertising Management: This is the home page for the Umbraco Advertising Management Project. Umbraco CMS is an .NET opensource CMS. This project has just started, you can download the source code of the initial version. The objective of this project is to create a package that would provide a new toVAI: The goal of this project is to create a home entertainment solution focused on various forms of user interaction such as audio, video, and traditional.XBee DSS service for Robotics Studio: This is a Microsoft Robotics Studio DSS service used to communicate with XBee devices. It is able to send messages to remote end devices and receive data samples from them. It is built on top of the Grommet library.????: ??:???

  Read the article

• CodePlex Daily Summary for Friday, May 25, 2012

  CodePlex Daily Summary for Friday, May 25, 2012Popular ReleasesWardsEngine: WardsEngine Alpha Release 1: A tiny taste of the library is here!Facebook PowerShell Module: FacebookPSModule Alpha 0.6.2: 2012-05-10: Release 0.6.2 adds Test-FBConnection and New-FBConnection -Connection -PageId, fixes a few minor bugs, and prepares for PowerShell 3.0. Soon I will declare this module to be in Beta. 0.6.0: This major new release adds support for Facebook Pages. New Facebook policies will push most medium-or-larger-sized organizations from users/groups to pages, so this support is critical to automate Facebook under the current policies. New-FBConnection -PageId <pageID> to get a connection spec...THE NVL Maker: The NVL Maker Ver 3.5: http://download.codeplex.com/Download?ProjectName=nvlmaker&DownloadId=371510 ????：http://115.com/file/be9pgwiw#THE-NVL-Maker-ver3.5-sim.7z ????：http://www.mediafire.com/?314vut69otco7tc ======================================== ???? ======================================== 3.5 alpha ???： ·??????，???????? ·????????，??????config.tjs????? ·??????KAGConfigEX2????????（??????config.tjs） ·???????? ·2.32?EXE????（???????????????，??????，???????） ????： ·???system????KAGEX1??（2.32?EXE?，??????????????...totalem: version 2012.05.24.1: Beta version added function to extract content of CD / DVD discs extract content of data disc to ISO image extract content of audio CD disc to WAV and MP3 filesPeople's Note: People's Note 0.41: Version 0.41 adds in-app playback of WAV file attachments. It also adds some more polish to the user interface. To install: copy the appropriate CAB file onto your WM device and run it.CODE Framework: 4.0.20524.0: This release has quite a few enhancements for WPF applications and SOA features. See change logs for more details.JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 2: JayData is a unified data access library for JavaScript developers to query and update data from different sources like webSQL, indexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video: http://www.youtube.com/watch?v=LlJHgj1y0CU Overview Knockout.js integrationUsing the Knockout.js module, your UI can be automatically refreshed when the data model changes, so you can develop the front-end of your data manager app even faster. Querying 1:N relations in WebSQL & SQLite SQ...????SDK for .Net 4.X: 2012?5?25??: ?Google Code????，???????????? *??????? *??????? *?????，????????????API?????Christoc's DotNetNuke Module Development Template: 00.00.08 for DNN6: BEFORE USE YOU need to install the MSBuild Community Tasks available from http://msbuildtasks.tigris.org For best results you should configure your development environment as described in this blog post Then read this latest blog post about customizing and using these custom templates. Installation is simple To use this template place the ZIP (not extracted) file in your My Documents\Visual Studio 2010\Templates\ProjectTemplates\Visual C#\Web OR for VB My Documents\Visual Studio 2010\Te...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.53: fix issue #18106, where member operators on numeric literals caused the member part to be duplicated when not minifying numeric literals ADD NEW FEATURE: ability to create source map files! The first mapfile format to be supported is the Script# format. Use the new -map filename switch to create map files when building your sources.BlackJumboDog: Ver5.6.3: 2012.05.22 Ver5.6.3 　(1) HTTP????????、ftp://??????????????????????LogicCircuit: LogicCircuit 2.12.5.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionThis release is fixing start up issue.Orchard Project: Orchard 1.4.2: This is a service release to address 1.4 and 1.4.1 bugs. Please read our release notes for Orchard 1.4.2: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.0): New fetures:View other users predictions Hide/Show background image (web part property) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...Metadata Document Generator for Microsoft Dynamics CRM 2011: Metadata Document Generator (2.0.0.0): New UI Metro style New features Save and load settings to/from file Export only OptionSet attributes Use of Gembox Spreadsheet to generate Excel (makes application lighter : 1,5MB instead of 7MB)ExtAspNet: ExtAspNet v3.1.6: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://bbs.extasp.net/ ??：http://demo.extasp.net/ ??：http://doc.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-05-20 v3.1.6 -??RowD...Dynamics XRM Tools: Dynamics XRM Tools BETA 1.0: The Dynamics XRM Tools 1.0 BETA is now available Seperate downloads are available for On Premise and Online as certain features are only available On Premise. This is a BETA build and may not resemble the final release. Many enhancements are in development and will be made available soon. Please provide feedback so that we may learn and discover how to make these tools better.PHPExcel: PHPExcel 1.7.7: See Change Log for details of the new features and bugfixes included in this release. BREAKING CHANGE! From PHPExcel 1.7.8 onwards, the 3rd-party tcPDF library will no longer be bundled with PHPExcel for rendering PDF files through the PDF Writer. The PDF Writer is being rewritten to allow a choice of 3rd party PDF libraries (tcPDF, mPDF, and domPDF initially), none of which will be bundled with PHPExcel, but which can be downloaded seperately from the appropriate sites.GhostBuster: GhostBuster Setup (91520): Added WMI based RestorePoint support Removed test code from program.cs Improved counting. Changed color of ghosted but unfiltered devices. Changed HwEntries into an ObservableCollection. Added Properties Form. Added Properties MenuItem to Context Menu. Added Hide Unfiltered Devices to Context Menu. If you like this tool, leave me a note, rate this project or write a review or Donate to Ghostbuster. Donate to GhostbusterEXCEL??、??、????????：DataPie（??MSSQL 2008、ORACLE、ACCESS 2007）: DataPie_V3.2: V3.2, 2012?5?19? ????ORACLE??????。New Projectsando: UltraPackageBildschirmpause: A small WPF / .net 4.0 app that reminds you to give your eyes some rest.DataJuggler.Web.Controls: DataJuggler.Web.Controls is a web control library with over a dozen useful controls that make web development faster and easier. The controls are free to use, I do accept donations or you can help promote my web site www.daily-click.com, which focuses on saving people and animals. If you have any questions, suggestions, problems or words of praise, please send an email to support@daily-click.com Daily-Click.com Using Technology to help people and animals.Eraile - My AI for Google Ants: My AI code (C#) for the Google Ants "competition".Expression Tree Visualizer for VS 2010: The entire project is a "visualizer" that displays the expression tree nodes and node attributes. only important attributes are selected to be appended to the visualization tree in order to keep it simple and useful.Fix soft Animation Maker: Animate everything in Windows Forms even easier than WPF.Creating ImageAnimation, ColorAnimations, DobleAnimations and IntegerAnimations was never easier.With a line code,you can create Fade in animation,moves,resizes and … .This product is made for Windows Forms but it works on WPF,too.It supports changes of values when animation is playing.It means the animation macth itself with new value.Invasive Cafe: Community website to help educate communities about local invasive species and organize and mobilize them to mitigate them. Includes Silverlight games to educate, entertain and attract users.JiHelper: Helper--JiPh?n m?m qu?n lý TT Ngo?i Ng? - Tin H?c ÐH Tây Nguyên: Ph?n m?m qu?n lý TT Ngo?i Ng? - Tin H?c ÐH Tây Nguyên Lu?n van T?t Nghi?p ÐHQWeiBo: ???????????????，???，??wp7??，??????。SCWLib: This project is a CSharp version of ShareChiWai Utility Lib http://sharechiwailib.codeplex.com which is a collection of code which I used when I develop application/website. Instead of writing the same code on every project, I built it as a dll, so that we [as a developer] can reuse it in future. Lets make it better =)It may have different Lib to ShareChiWai Utility Lib, however, in future it will have the same and probably a bit more feature than ShareChiWai Utility Lib. Hope you find i...Silverlight CRM Lookup Control: SilverCrmLookup is a Silverlight user control for CRM 2011 to help improve user experience for silverlight web resources. Contains built in properties that gives Single Lookup or Multi Lookup options and item auto complete options , Filtering ...SkypeLogIPGrabber: The SkypeLogIPGrabber works with the patched Skype 5.5/5.9 clients to read the produced unencrypted log files to give the IP Information that the Skype client logged.SmartLogistic: Smartlogistic Supply Chain Managment SystemSql Cloud: i will write laterSym: Sym is a symbolic computation application by SymbolicComputation.com. Solve algebra problems, etc.template Nas: template nastestdd0524201201: dfstestdd05242012git001: dftestddhg0524201201: adsftesttfs0524201201: dsftesttom05242012git01: dsfdsfdsftesttom05242012git02: fdsfdsfdsfTwitterOAuth: TwitterOAuth an oauth library for .net apps,Ulfi: Universal log filter (Ulfi) is a tool I've written for myself to ease watching through painfully error logs.VSTestManagerSandbox: This project was created solely for those people who needs a sandbox to use VS Test ManagerWindows Phone Cocos 2D like Game Engine: This project seeks to make an engine for XNA Game Development for Windows Phone, similar to the popular Cocos2D (http://www.cocos2d-iphone.org/). Due to the success of this engine on platforms like iPhone and Android would be easier for developers to port or create new games on this engine. This engine contains many similarities with the original cocos2d engine for iOS, including full compatibility with the tileset plist files created in many availables tools. WP Coco use a animation...XNA TileViewer: Texture tilling preview program written in C#, XNA.YuCMS: YuCMS ??CMS，??CMS ??????～ ?????????: ??????SDK for .Net 4.X: ????????????API?????，???.Net 4.0??????WebForm、Winform?WPF??????。

  Read the article

• CodePlex Daily Summary for Monday, November 14, 2011

  CodePlex Daily Summary for Monday, November 14, 2011Popular ReleasesWeapsy: 0.4.1 Alpha: Edit Text bug fixedDesktop Google Reader: 1.4.2: This release remove the like and the broadcast buttons as Google Reader stopped supporting them (no, we don't like this decission...) Additionally and to have at least a small plus: the login window now automaitcally logs you in if you stored username and passwort (no more extra click needed) Finally added WebKit .NET to the about window and removed AwesomiumZombsquare: Solución inicial: Código fuente de la solución. Versión 7099 Tambien puedes descargar de aquí los snippets de código que utilizamos en la demostración.RDRemote: Remote Desktop remote configurator V 1.0.0: Remote Desktop remote configurator V 1.0.0SQL Monitor - tracking sql server activities: SQLMon 4.1 alpha1: 1. improved version compare, now support comparing two text files. right click on object script text box and choose "Compare" or create new query window and right click and choose "Compare" 2. improved version compare, now automatically sync two text boxes. 3. fixed problem with activities (process/job) when refreshing while current activities have less count than previous one. 4. better start up by automatically shows create connection window when there is no connection defined.Rawr: Rawr 4.2.7: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...VidCoder: 1.2.2: Updated Handbrake core to svn 4344. Fixed the 6-channel discrete mixdown option not appearing for AAC encoders. Added handling for possible exceptions when copying to the clipboard, added retries and message when it fails. Fixed issue with audio bitrate UI not appearing sometimes when switching audio encoders. Added extra checks to protect against reported crashes. Added code to upgrade encoding profiles on old queued items.Dynamic PagedCollection (Silverlight / WPF Pagination): PagedCollection: All classes which facilitate your dynamic pagination in Silverlight or WPF !Media Companion: MC 3.422b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) TV Show Resolutions... Made the TV Shows folder list sorted. Re-visibled 'Manually Add Path' in Root Folders. Sorted list to process during new tv episode search Rebuild Movies now processes thru folders alphabetically Fix for issue #208 - Display Missing Episodes is not popu...DotSpatial: DotSpatial Release Candidate 1 (1.0.823): Supports loading extensions using System.ComponentModel.Composition. DemoMap compiled as x86 so that GDAL runs on x64 machines. How to: Use an Assembly from the WebBe aware that your browser may add an identifier to downloaded files which results in "blocked" dll files. You can follow the following link to learn how to "Unblock" files. Right click on the zip file before unzipping, choose properties, go to the general tab and click the unblock button. http://msdn.microsoft.com/en-us/library...XPath Visualizer: XPathVisualizer v1.3 Latest: This is v1.3.0.6 of XpathVisualizer. This is an update release for v1.3. These workitems have been fixed since v1.3.0.5: 7429 7432 7427MSBuild Extension Pack: November 2011: Release Blog Post The MSBuild Extension Pack November 2011 release provides a collection of over 415 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...CODE Framework: 4.0.11110.0: Various minor fixes and tweaks.Extensions for Reactive Extensions (Rxx): Rxx 1.2: What's NewRelated Work Items Please read the latest release notes for details about what's new. Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many useful types such as ViewModel, CommandSubject, ListSubject, DictionarySubject, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T> and others. Various interactive labs that illustrate the runtime behavior of the extensio...Player Framework by Microsoft: HTML5 Player Framework 1.0: Additional DownloadsHTML5 Player Framework Examples - This is a set of examples showing how to setup and initialize the HTML5 Player Framework. This includes examples of how to use the Player Framework with both the HTML5 video tag and Silverlight player. Note: Be sure to unblock the zip file before using. Note: In order to test Silverlight fallback in the included sample app, you need to run the html and xap files over http (e.g. over localhost). Silverlight Players - Visit the Silverlig...MapWindow 4: MapWindow GIS v4.8.6 - Final release - 64Bit: What’s New in 4.8.6 (Final release)A few minor issues have been fixed What’s New in 4.8.5 (Beta release)Assign projection tool. (Sergei Leschinsky) Projection dialects. (Sergei Leschinsky) Projections database converted to SQLite format. (Sergei Leschinsky) Basic code for database support - will be developed further (ShapefileDataClient class, IDataProvider interface). (Sergei Leschinsky) 'Export shapefile to database' tool. (Sergei Leschinsky) Made the GEOS library static. geos.dl...Facebook C# SDK: v5.3.2: This is a RTW release which adds new features and bug fixes to v5.2.1. Query/QueryAsync methods uses graph api instead of legacy rest api. removed dependency from Code Contracts enabled Task Parallel Support in .NET 4.0+ (experimental) added support for early preview for .NET 4.5 (binaries not distributed in codeplex nor nuget.org, will need to manually build from Facebook-Net45.sln) added additional method overloads for .NET 4.5 to support IProgress<T> for upload progress added ne...Delete Inactive TS Ports: List and delete the Inactive TS Ports: UPDATEAdded support for windows 2003 servers and removed some null reference errors when the registry key was not present List and delete the Inactive TS Ports - The InactiveTSPortList.EXE accepts command line arguments The InactiveTSPortList.Standalone.WithoutPrompt.exe runs as a standalone exe without the need for any command line arguments.ClosedXML - The easy way to OpenXML: ClosedXML 0.60.0: Added almost full support for auto filters (missing custom date filters). See examples Filter Values, Custom Filters Fixed issues 7016, 7391, 7388, 7389, 7198, 7196, 7194, 7186, 7067, 7115, 7144Microsoft Research Boogie: Nightly builds: This download category contains automatically released nightly builds, reflecting the current state of Boogie's development. We try to make sure each nightly build passes the test suite. If you suspect that was not the case, please try the previous nightly build to see if that really is the problem. Also, please see the installation instructions.New ProjectsAwpAdmin: AwpAdmin (name tentative) is a powerful BF3 admin tool. This admin tool is being designed to be easy to setup and maintain while having a great deal of customizability and power. This is written in C# and is being designed to be Mono-compatible.ChainReaction.Net: Extension library that aims to allow method chains to be attached to code statements, allowing them to be read more fluently , allowing extra logic to effectively be bolted on in a fluid wayCodeigniter SQL Azure/SQL Server Unicode supported driver.: Codeigniter?SQL Server 2005/2008 SQLAzure????????????。 NPrefix???????、Unicode???（??????）?????????????。 Active record / ???????????、N?????????????????????????。 ???????????????、N???????????????????、?????????N???????????????????。 ????????????????。 See http://msdn.microsoft.com/ja-jp/library/ms191313.aspx ??、????????????????????。 (Codeplex?Apache????????????、Ellislab license????????。) --- SQL Server 2005 / 2008 / SQL Azure driver class for Codeigniter. this driver N prefix uni...EZ-NFC: EZ-NFC is a .NET library, written in C#, aimed at simplifying the use of NFC in applications.Farigola: A library to organize and manage dynamic data. It's developed in C#/.NET language. Forca_adrikei: Forca implementada para o curso de C# da ufscar sorocaba.GemTD: Gem Tower Defense starcraft 2 map simulator implemented via C# and XNA. Components needed: Microsoft .NET Framework 4 Microsoft XNAGSISWebServiceMVC: This is a sample of an MVC application using the Greek GSIS Web Service at http://www.gsis.gr/wsnp.html (in Greek).Ini4Net: Ini4Net is a simple INI class for parsing INI files in your application. There are many INI solutions available around but non of them met my simplicity so I rolled-my-own. I have been using this since 2008 in several applications that are being used in the enterprise.Jogo da Memória: Projeto de C# - Jogo da memóriaJson DataContract Builder - Create JsonAPI SDK from samples & xmls: Yeah, you can access json with dynamic & Json.Net. But why can't we have the old static way? Is there no one miss the happiness of working with intellisense? There must be a easy way.K-Vizinhos: K-VizinhosLie to Me Windows Phone 7 App: Lie to me - application on WindowsPhone7 platform for testing face expressions, basend on popular serial "Lie To Me".Localization Project: Localization project is C# library to simplify localizing .NET applications and websites. Primary purpose of this project is support instant language switching on the fly.Luminji.wp: luminji's melearning windows phone soft.mergemania - pdf merging .net library based on iTextSharp: Merge PDF documents from different source documents into several destination documents. Set the page ranges to merge from and the page ranges to merge into. Everything is configured via an single XML file. You access all elements through strongly typed classes generated from XSD.Metro Pandora: Metro Pandora aims to ship a Pandora SDK and apps for XAML .net platforms.MiniState: MiniState is an attempt to provide simple abstraction layer to reading and writing state information like HTTP cookies to minimise cookie size and increase the quality of code and security.Mocklet: Mocklet is a suite of PowerShell cmdlets designed to help system administrator generate sample or mock data for testing or building test environments.nethelper: silverlight extend libraryNeverForget: NeverForget is a simple KB projectOpenCV examples: Sample project for interprocess image sharing. Using OpenCV and Boost. Server : Capture image from webcam and write image to shared memory region. Client : Read image from shared memory and imshow the image.Portable Class Libraries Contrib: Portable Class Libraries Contrib provides portable adapters and APIs that help bridge the gap between different platforms when using the new Portable Class Library feature. This makes it easier to convert existing platform-specific libraries over to use portable APIs.sbfa: sbfaShortcut Manager: Shortcut Manager (SM) is solution for everyone who is looking for creating keyboard shortcuts in .NET Winforms applications. SM uses Win32 API to create keyboard hook and fires supplied handler after required shortcut is pressed.SIGEMdispro: Proyecto de un curso de la universidadSimpleMvcCaptcha: Captcha HtmlHelper for ASP.NET MVC 3 with simple ariphmetic expression. No WCF required, neither any other communications. Written in C#.Traveling salesman problem solver using google maps: This application provides a solution for the traveling salesman problem using Google maps, developed in C# and ASP.net.WebPALTT: A Web performance and load test tool for testing web sites / applications. Features include easy to use scenario builder and powerful scripting for high customisability. Developed in .Net C#.WriteMyName: Código para escrever o nome do autor no começo de código fonte.zenSQLcompare: Compare SQL

  Read the article

• CodePlex Daily Summary for Saturday, November 17, 2012

  CodePlex Daily Summary for Saturday, November 17, 2012Popular ReleasesPaint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...Water Entity for SunBurn: Sunburn Water Entity For 2.0.1.8 (Deffered Only): Sunburn water entity for Sunburn 2.0.1.8 for deffered rendering only, forward water is not working yet. You need to download water normal maps, from Sunburn Reflection/Refraction example from Here.CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...xUnit.net Contrib: xunitcontrib-resharper 0.7 (RS 7.1, 6.1.1): xunitcontrib release 0.6.1 (ReSharper runner) This release provides a test runner plugin for Resharper 7.1 RTM and 6.1.1, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release drops 7.0 support and targets the latest revisions of the last two major versions of ReSharper (namely 7.0 and 6.1.1). Copies of the plugin that support previous verions of ReSharper can be downloaded from this release. Also note that all builds work against ALL ...MVC Bootstrap: MVC Boostrap 0.5.6: A small demo site, based on the default ASP.NET MVC 3 project template, showing off some of the features of MVC Bootstrap. Added features to the Membership provider, a "lock out" feature to help fight brute force hacking of accounts. After a set number of log in attempts, the account is locked for a set time. If you download and use this project, please give some feedback, good or bad!Home Access Plus+: v8.4: This release only contains fixes for the 97576 release, you can download the v8.3 release files which aren't in this release from 97576 Changes: Fixed: Setup.aspx wrong jquery reference Fixed: Issue with loading the user's photo Changed: The JSON Urls to use a number of a date rather than a string Added: Code to hopefully, finally, fix the AD Browser not working some times File Changes: ~/bin/hap.ad.dll ~/bin/hap.web.dll ~/bin/hap.web.configuration.dll ~/bin/hap.web.livetiles.dl...OnTopReplica: Release 3.4: Update to the 3 version with major fixes and improvements. Compatible with Windows 8. Now runs (and requires) .NET Framework v.4.0. Added relative mode for region selection (allows the user to select regions as margins from the borders of the thumbnail, useful for windows which have a variable size but fixed size controls, like video players). Improved window seeking when restoring cloned thumbnail or cloning a window by title or by class. Improved settings persistence. Improved co...DotSpatial: DotSpatial 1.4: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.5: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes Docum...AcDown?????: AcDown????? v4.3: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...????: ???? 1.0: ????Unicode IVS Add-in for Microsoft Office: Unicode IVS Add-in for Microsoft Office: Unicode IVS Add-in for Microsoft Office ??? ?????、Unicode IVS?????????????????Unicode IVS???????????????。??、??????????????、?????????????????????????????。Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.74: fix for issue #18836 - sometimes throws null-reference errors in ActivationObject.AnalyzeScope method. add back the Context object's 8-parameter constructor, since someone has code that's using it. throw a low-pri warning if an expression statement is == or ===; warn that the developer may have meant an assignment (=). if window.XXXX or window"XXXX" is encountered, add XXXX (as long as it's a valid JavaScript identifier) to the known globals so subsequent references to XXXX won't throw ...???????: Monitor 2012-11-11: This is the first releasehttpclient?????????: httpclient??????? 1.0: httpclient??????? （1）?????????? （2）????????? （3）??2012-11-06??，???????。VidCoder: 1.4.5 Beta: Removed the old Advanced user interface and moved x264 preset/profile/tune there instead. The functionality is still available through editing the options string. Added ability to specify the H.264 level. Added ability to choose VidCoder's interface language. If you are interested in translating, we can get VidCoder in your language! Updated WPF text rendering to use the better Display mode. Updated HandBrake core to SVN 5045. Removed logic that forced the .m4v extension in certain ...New Projects40Fingers Page Language module for DotNetNuke: DotNetNuke module that allows you to overrule the language a specific page, without using any other localization solutions. Brought to you by 40FINGERSAnonymous Interfaces (by Stephen Cleary): A fluent API for dynamically creating an anonymous type implementing a specific interface.Asynk: Asynk is a framework/application that allows existing applications to easily be extended with an offloaded asynchronous worker layer. Asynk is developed using C#.BizTalkWCFOperationPromoteEncoder: If you seen the BizTalk error: " An action mapping was defined but BTS.Operation was not found in the Message context ", When you use the BizTalk WCF-Customer, bLaugh Plugin for Windows Live Writer: The bLaugh Plugin for Windows Live Writer provides a quick and easy way to find and insert bLaugh (www.blaugh.com) comics into a blog post.CaptureWebPage: Code Between The Lines @ http://www.codebetweenthelines.com Capture an Entire Web Page in a C# Console Application Sample application that fixes most problems.CF-Soft: this is my workspace to study C# programming.Cloud Backup Scheduler: Desktop utility to auto schedule online backups with popular cloud services. Cloud Giraffe: Cloud Giraffe is a library which provides easy collection and analysis of Windows Azure Diagnostics data.dbscript: dbscript is a simple scripting language for DBAs, devs, and others who have need to routinely deliver the results of SQL queries in Excel spreadsheet form.Drill: Drill is the Dependency Resolution and Instance Location Layer, an abstraction to DI containers, service locators and the like facilitating loose coupling.Drzewa decyzyjne WPF: Praca inzE-Commerce Gado: E commerce voltado para o mercado bovinoELearningTutorial: A list of tutorialsElmas Kitap: Kitapliginizi düzenleyebileceginiz bir program.Epi Info iOS Companion: iPad and iPhone companion for Epi Info 7.FreeBlokus: A simple version of Blokus Duo.g1: test GGCStatus: Global Gift Card by We Solve IT. Server Status ApplicationGiveGraph: Social Managed Resources Distribution SystemGlobal String Formatter: The Global String Formatter library allows developers to deal with conditional string formatting in an elegant fashion. Developers specify a predicate and a corresponding string output function for each case of the formatting. The library plays well with DI frameworks.HTWKAidStation: The HTWKAidStation shows schedules and the menu of local mensae in Leipzig, Germany.JsViewEngine - a ASP.NET View Engine using JsRender on both client and server: An ASP.NET View Engine that specializes in sharing partial views between client and server.Kexp.ShoutcastRunner: ShoutcastRunner is a quick and simple Windows service that runs the SHOUTcast DNAS 1.x mp3 server and provides some extra features. MDrive - Controlling Precision Electric Motors: This project demonstrates how to control MDrive(r) precision electric motors from Schneider Electric.MyNet Project: MyNet is an undergraduate project developed in the context of the Cloud Data Management cours at Grenoble INP.Passwords Thief: Sometimes you need to see what is behind asteriks in password edit box. It will help you to resolve this problem. Pet Shop Web: Projeto para gerenciamento de Pet Shop Desenvolvido em ASP.NET com Framework 4.0primeiros passos: aRCVersion: A smart tool to modify version information in RC file.recycling20: Recycling 2.0replaceSID: replaceSID replaces an SID in a SDDL fileshmapcha: Cool toolSMC (Social Media Connector): Social Media APIs are developed to provide Join-In Game providers to access Social Media Portal. Textline Processor: Textline processor is a utility to execute C# codes dynamically on each line of texts, and get output to replace lines in the text. treadmill project: Treadmill ProjectTriathlon Checklist: Triathlon Checklist is a Windows Phone application for triathletes. Download it for free: http://bit.ly/TriathlonChecklistwarhamer40kListBuilder: projet personnel de geston de liste d'armée pour le jeux warhammer 40.000.Wonder: WonderWP7GBAEmulator: A C# GBA Emulator For Windows Phone 7WPF Message Box: WPF Message Box is a simple and free message box for WPF using MVVM pattern. Image, buttons, message, and caption can be set.????: ??????·???????????????

  Read the article

• qemu-kvm virtual machine virtio network freeze under load

  - by Rick Koshi

  I'm having a problem with my virtual machines, where the network will freeze under heavy load. I'm using CentOS 6.2 as both host and guest, not using libvirt, just running qemu-kvm directly as follows: /usr/libexec/qemu-kvm \ -drive file=/data2/vm/rb-dev2-www1-vm.img,index=0,media=disk,cache=none,if=virtio \ -boot order=c \ -m 2G \ -smp cores=1,threads=2 \ -vga std \ -name rb-dev2-www1-vm \ -vnc :84,password \ -net nic,vlan=0,macaddr=52:54:20:00:00:54,model=virtio \ -net tap,vlan=0,ifname=tap84,script=/etc/qemu-ifup \ -monitor unix:/var/run/vm/rb-dev2-www1-vm.mon,server,nowait \ -rtc base=utc \ -device piix3-usb-uhci \ -device usb-tablet /etc/qemu-ifup (used by the above command) is a very simple script, containing the following: #!/bin/sh sudo /sbin/ifconfig $1 0.0.0.0 promisc up sudo /usr/sbin/brctl addif br0 $1 sleep 2 And here's the info on br0 and other interfaces: avl-host3 14# brctl show bridge name bridge id STP enabled interfaces br0 8000.180373f5521a no bond0 tap84 virbr0 8000.525400858961 yes virbr0-nic avl-host3 15# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:1e brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:20 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 7: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet 172.16.1.46/24 brd 172.16.1.255 scope global br0 inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 8: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 9: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 500 link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff 12: tap84: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether ba:e8:9b:2a:ff:48 brd ff:ff:ff:ff:ff:ff inet6 fe80::b8e8:9bff:fe2a:ff48/64 scope link valid_lft forever preferred_lft forever bond0 is a bond of em1 and em2. virbr0 and virbr0-nic are vestigial interfaces left over from CentOS's default installation. They are unused (as far as I know). The guest runs perfectly until I run a large 'rsync', when the network will freeze after some seemingly-random time (usually under a minute). When it freezes, there is no network activity in or out of the guest. I can still connect to the guest's console via vnc, but it is unable to speak out its network interface. Any attempt to 'ping' from the guest gives a "Destination Host Unreachable" error for 3/4 packets and no reply for every fourth packet. Sometimes (perhaps two thirds of the time), I can bring the interface back to life by doing a "service network restart" from the guest's console. If this works (and if I do it before the rsync times out), the rsync will resume. Usually it will freeze again within a minute or two. If I repeat, the rsync will eventually finish, and I presume the machine goes back to waiting for another period of heavy load. Throughout the whole process, there are no console errors or relevant (that I can see) syslog messages on either guest or host machine. If the "service network restart" doesn't work the first time, trying again (and again and again) never seems to work. The command completes normally, with normal output, but the interface stays frozen. However, a soft reboot of the guest machine (without restarting qemu-kvm) always seems to bring it back. I am aware of the "lowest mac address" assignment problem, where the bridge takes on the mac address of the slave interface with the lowest mac address. This causes temporary network freezes, but is definitely not what's happening for me. My freezes are permanent until manual intervention, and you can see from the 'ip addr show' output above that the mac address being used by br0 is that of the physical ethernet. There are no other virtual machines running on the host. I've verified that each virtual machine on the subnet has its own unique mac address. I have rebuilt the guest machine several times, and I have tried this on three different host machines (identical hardware, built identically). Oddly, I do have one virtual host (the second of this series) which never seemed to have a problem. It never had its network freeze when it was running the same rsync during its build. It's particularly odd because it was the second build. The first, on a different host, did have the freezing problem, but the second did not. I assumed at the time that I had done something wrong with the first build, and that the problem was resolved. Unfortunately, the problem reappeared when I built the third VM. Also unfortunately, I can't do many tests with the working VM, as it's now in production use, and I'm hoping I can find the cause of this issue before that machine starts having problems. It's possible that I just got really lucky while running the rsync on the working machine, and that one time it didn't freeze. Of course it's possible that I somehow changed the build scripts without realizing it and re-broke something, but I can't find any such thing. In any case, I'm hoping someone has some idea what could cause this. Addendum: Preliminary tests suggest that I don't have the problem if I substitute e1000 for virtio in the first -net flag to qemu-kvm. I don't consider this a solution, but it is suitable for a stopgap. Has anyone else had (or better yet, solved) this problem with the virtio network driver?

  Read the article

• Allowing connections initiated from outside

  - by Mark S. Rasmussen

  I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  Read the article

• Why are my hard drives failing?

  - by WishCow

  I have a small Ubuntu server running at home, with 2 HDDs. There are two software raids (raid1) on the disks, managed by mdadm, which I believe is irrelevant, but mentioning it anyway. Both of the HDDs are Western Digital, and have been used for around 2 years, when one of them started making clicking noises, and died. I figured that maybe it's natural after 2 years, so I bought a new one, and resynced the raid arrays. After about a month, the other drive also died. I didn't get suspicious, since both drives have been bought at the same time, it's not that surprising to see both of them near each other, so I bought another one. So far, 2 old drives failed, and 2 brand new in the system. After one month, one of the new drives died. This is when it started getting suspicious. Since the PC was put together from some really old parts (think AthlonXP), I figured that maybe the motherboard's SATA controller is the culprit. Of course you can't switch parts easily in an old PC like this, so I bought a whole system, new MB, new CPU, new RAM. Took the just failed drive back, since it was under warranty, and got it replaced. So it is up to 2 failed drives from the old ones, and 1 failed drive from the new ones. No problems, for 1 month. After that errors were creeping up again in /var/log/messages, and mdadm was reporting raid array failures. I started tearing my hair out. Everything is new in the system, it's up to the third brand new HDD, it's simply not possible that all of the new drives that I bought were faulty. Let's see what is still common... the cables. Okay, long shot, let's replace the SATA cables. Take HDD back, smile to the guy at the counter and say that I'm really unlucky. He replaces the HDD. I come home, one month passes and one of HDDs fails, again. I'm not joking. Two of the brand new HDDs have failed. Maybe it's a bug in the OS. Let's see what the manufacturer's testing tool says. Download testing tool, burn it to a CD, reboot, leave HDD testing overnight. Test says that the drive is faulty, and I should back up everything, if I still can. I don't know what's happening, but it does not look like a software problem, something is definitely thrashing the HDDs. I should mention now, that the whole system is in a shoebox. Since there are a load of "build your own ikea case" stuff, I thought there shouldn't be any problems throwing the thing in a box, and stuffing it away somewhere. The box is well ventilated, but I thought that just maybe the drives were overheating. There is no other possible answer to this. So I took the HDD back, and got it replaced (for the 3rd time), and bought HDD coolers. And just now, I have heard the sound of doom. click click whizzzzzzzzz. SSH into the box: You have new mail! mail r 1 DegradedArrayEvent on /dev/md0 ... dmesg output: [47128.000051] ata3: lost interrupt (Status 0x50) [47128.000097] end_request: I/O error, dev sda, sector 58588863 [47128.000134] md: super_written gets error=-5, uptodate=0 [48043.976054] ata3: lost interrupt (Status 0x50) [48043.976086] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [48043.976132] ata3.00: cmd c8/00:18:bf:40:52/00:00:00:00:00/e1 tag 0 dma 12288 in [48043.976135] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [48043.976208] ata3.00: status: { DRDY } [48043.976241] ata3: soft resetting link [48044.148446] ata3.00: configured for UDMA/133 [48044.148457] ata3.00: device reported invalid CHS sector 0 [48044.148477] ata3: EH complete Recap: No possibility of overheating 6 drives have failed, 4 of those have been brand new. I'm not sure now that the original two have been faulty, or suffered the same thing that the new ones. There is nothing common in the system, apart from the OS which is Ubuntu Karmic now (started with Jaunty). New MB, new CPU, new RAM, new SATA cables. No, the little holes on the HDD are not covered I'm crying. Really. I don't have the face to return to the store now, it's not possible for 4 drives to fail under 4 months. A few ideas that I have been thinking: Is it possible that I fuck up something when I partition and resync the drives? Can it be so bad that it physicaly wrecks the drive? (since the vendor supplied tool says that the drive is damaged) I do the partitoning with fdisk, and use the same block size for the raid1 partitions (I check the exact block sizes with fdisk -lu) Is it possible that the linux kernel or mdadm, or something is not compatible with this exact brand of HDDs, and thrashes them? Is it possible that it may be the shoebox? Try placing it somewhere else? It's under a shelf now, so humidity is not a problem either. Is it possible that a normal PC case will solve my problem (I'm going to shoot myself then)? I will get a picture tomorrow. Am I just simply cursed? Any help or speculation is greatly appreciated. Edit: The power strip is guarded against overvoltage. Edit2: I have moved inbetween these 4 months, so the possibility of the cause being "dirty" electricity in both places, is very low. Edit3: I have checked the voltages in the BIOS (couldn't borrow a multimeter), and they are all seem correct, the biggest discrepancy is in the 12V, because it's supplying 11.3. Should I be worried about that? Edit4: I put my desktop PC's PSU into the server. The BIOS reported much more accurate voltage readings, and also it has successfully rebuilt the raid1 array, which took some 3-4 hours, so I feel a little positive now. Will get a new PSU tomorrow to test with that. Also, attaching the picture about the box: (disregard the 3rd drive)

  Read the article

• Suspended Laptop Cannot Wake Up - Ubuntu

  - by Zack

  I've got an ASUS G73JH, and whenever I suspend it or hibernate it, it will not wake up. The screen stays backlight but is black. The fan remains running, however the HDD does not, not disk activity is noticeable (audibly (It's not a SSD)). I can't: Awaken it with the keyboard Awaken it with the mouse Soft power-off by pressing the power button Change virtual screens by pressing Ctrl-Alt-# Restart X by pressing Ctrl-Alt-Backspace I have to hold down the power button and shut it down that way, and this seems a little unreasonable. Is there a place I could look for more detail as to what's causing this? Is there a known quick-fix to this issue? Nothing is logged as happening when the system is in "suspend" mode. Here's what happened immediately before and after the suspend "happened," note the time gap: May 4 17:46:13 tofu NetworkManager: <info> (eth0): carrier now OFF (device state 1) May 4 17:48:57 tofu kernel: imklog 4.2.0, log source = /proc/kmsg started. This one's kinda long, here's what happened immediately before the suspend, I'm not sure if it'll help but if you can find a use for it: May 4 17:46:10 tofu anacron[3353]: Anacron 2.3 started on 2010-05-04 May 4 17:46:10 tofu anacron[3353]: Normal exit (0 jobs run) May 4 17:46:10 tofu kernel: [ 2241.775927] CPU0 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.775958] CPU1 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.775987] CPU2 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776138] CPU3 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776168] CPU4 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776197] CPU5 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776200] CPU6 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776229] CPU7 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.919611] CPU0 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.919668] domain 0: span 0,4 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.919699] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.919733] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.919762] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.919850] CPU1 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.919852] domain 0: span 1,5 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.919881] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.919912] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.919915] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920003] CPU2 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920005] domain 0: span 2,6 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920033] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920065] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920093] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920155] CPU3 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920157] domain 0: span 3,7 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920185] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920217] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920245] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920307] CPU4 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920335] domain 0: span 0,4 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920337] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920368] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920397] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920459] CPU5 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920487] domain 0: span 1,5 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920489] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920520] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920549] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920611] CPU6 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920639] domain 0: span 2,6 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920641] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920699] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920701] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920762] CPU7 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920791] domain 0: span 3,7 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920793] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920851] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920853] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 4 17:46:12 tofu NetworkManager: <info> Sleeping... May 4 17:46:12 tofu NetworkManager: <info> (wlan0): now unmanaged May 4 17:46:12 tofu NetworkManager: <info> (wlan0): device state change: 8 -> 1 (reason 37) May 4 17:46:12 tofu NetworkManager: <info> (wlan0): deactivating device (reason: 37). May 4 17:46:12 tofu NetworkManager: <info> (wlan0): canceled DHCP transaction, dhcp client pid 1984 May 4 17:46:12 tofu kernel: [ 2244.084515] wlan0: deauthenticating from 68:7f:74:23:02:ae by local choice (reason=3) May 4 17:46:12 tofu avahi-daemon[1176]: Withdrawing address record for 192.168.1.2 on wlan0. May 4 17:46:12 tofu avahi-daemon[1176]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.2. May 4 17:46:12 tofu avahi-daemon[1176]: Interface wlan0.IPv4 no longer relevant for mDNS. May 4 17:46:12 tofu NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS. May 4 17:46:12 tofu NetworkManager: <info> (wlan0): cleaning up... May 4 17:46:12 tofu NetworkManager: <info> (wlan0): taking down device. May 4 17:46:12 tofu avahi-daemon[1176]: Withdrawing address record for 2002:4c6e:638a:0:1e4b:d6ff:fe78:951d on wlan0. May 4 17:46:12 tofu wpa_supplicant[1212]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys May 4 17:46:13 tofu NetworkManager: <info> (eth0): now unmanaged May 4 17:46:13 tofu NetworkManager: <info> (eth0): device state change: 8 -> 1 (reason 37) May 4 17:46:13 tofu NetworkManager: <info> (eth0): deactivating device (reason: 37). May 4 17:46:13 tofu NetworkManager: <info> (eth0): canceled DHCP transaction, dhcp client pid 1559 May 4 17:46:13 tofu NetworkManager: <WARN> check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess#012 May 4 17:46:13 tofu avahi-daemon[1176]: Withdrawing address record for 192.168.1.3 on eth0. May 4 17:46:13 tofu avahi-daemon[1176]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.3. May 4 17:46:13 tofu avahi-daemon[1176]: Interface eth0.IPv4 no longer relevant for mDNS. May 4 17:46:13 tofu NetworkManager: <info> (eth0): cleaning up... May 4 17:46:13 tofu NetworkManager: <info> (eth0): taking down device. May 4 17:46:13 tofu avahi-daemon[1176]: Withdrawing address record for 2002:4c6e:638a:0:4a5b:39ff:fe0b:325d on eth0. May 4 17:46:13 tofu NetworkManager: <info> (eth0): carrier now OFF (device state 1)

  Read the article

• Toorcon14

  - by danx

  Toorcon 2012 Information Security Conference San Diego, CA, http://www.toorcon.org/ Dan Anderson, October 2012 It's almost Halloween, and we all know what that means—yes, of course, it's time for another Toorcon Conference! Toorcon is an annual conference for people interested in computer security. This includes the whole range of hackers, computer hobbyists, professionals, security consultants, press, law enforcement, prosecutors, FBI, etc. We're at Toorcon 14—see earlier blogs for some of the previous Toorcon's I've attended (back to 2003). This year's "con" was held at the Westin on Broadway in downtown San Diego, California. The following are not necessarily my views—I'm just the messenger—although I could have misquoted or misparaphrased the speakers. Also, I only reviewed some of the talks, below, which I attended and interested me. MalAndroid—the Crux of Android Infections, Aditya K. Sood Programming Weird Machines with ELF Metadata, Rebecca "bx" Shapiro Privacy at the Handset: New FCC Rules?, Valkyrie Hacking Measured Boot and UEFI, Dan Griffin You Can't Buy Security: Building the Open Source InfoSec Program, Boris Sverdlik What Journalists Want: The Investigative Reporters' Perspective on Hacking, Dave Maas & Jason Leopold Accessibility and Security, Anna Shubina Stop Patching, for Stronger PCI Compliance, Adam Brand McAfee Secure & Trustmarks — a Hacker's Best Friend, Jay James & Shane MacDougall MalAndroid—the Crux of Android Infections Aditya K. Sood, IOActive, Michigan State PhD candidate Aditya talked about Android smartphone malware. There's a lot of old Android software out there—over 50% Gingerbread (2.3.x)—and most have unpatched vulnerabilities. Of 9 Android vulnerabilities, 8 have known exploits (such as the old Gingerbread Global Object Table exploit). Android protection includes sandboxing, security scanner, app permissions, and screened Android app market. The Android permission checker has fine-grain resource control, policy enforcement. Android static analysis also includes a static analysis app checker (bouncer), and a vulnerablity checker. What security problems does Android have? User-centric security, which depends on the user to grant permission and make smart decisions. But users don't care or think about malware (the're not aware, not paranoid). All they want is functionality, extensibility, mobility Android had no "proper" encryption before Android 3.0 No built-in protection against social engineering and web tricks Alternative Android app markets are unsafe. Simply visiting some markets can infect Android Aditya classified Android Malware types as: Type A—Apps. These interact with the Android app framework. For example, a fake Netflix app. Or Android Gold Dream (game), which uploads user files stealthy manner to a remote location. Type K—Kernel. Exploits underlying Linux libraries or kernel Type H—Hybrid. These use multiple layers (app framework, libraries, kernel). These are most commonly used by Android botnets, which are popular with Chinese botnet authors What are the threats from Android malware? These incude leak info (contacts), banking fraud, corporate network attacks, malware advertising, malware "Hackivism" (the promotion of social causes. For example, promiting specific leaders of the Tunisian or Iranian revolutions. Android malware is frequently "masquerated". That is, repackaged inside a legit app with malware. To avoid detection, the hidden malware is not unwrapped until runtime. The malware payload can be hidden in, for example, PNG files. Less common are Android bootkits—there's not many around. What they do is hijack the Android init framework—alteering system programs and daemons, then deletes itself. For example, the DKF Bootkit (China). Android App Problems: no code signing! all self-signed native code execution permission sandbox — all or none alternate market places no robust Android malware detection at network level delayed patch process Programming Weird Machines with ELF Metadata Rebecca "bx" Shapiro, Dartmouth College, NH https://github.com/bx/elf-bf-tools @bxsays on twitter Definitions. "ELF" is an executable file format used in linking and loading executables (on UNIX/Linux-class machines). "Weird machine" uses undocumented computation sources (I think of them as unintended virtual machines). Some examples of "weird machines" are those that: return to weird location, does SQL injection, corrupts the heap. Bx then talked about using ELF metadata as (an uintended) "weird machine". Some ELF background: A compiler takes source code and generates a ELF object file (hello.o). A static linker makes an ELF executable from the object file. A runtime linker and loader takes ELF executable and loads and relocates it in memory. The ELF file has symbols to relocate functions and variables. ELF has two relocation tables—one at link time and another one at loading time: .rela.dyn (link time) and .dynsym (dynamic table). GOT: Global Offset Table of addresses for dynamically-linked functions. PLT: Procedure Linkage Tables—works with GOT. The memory layout of a process (not the ELF file) is, in order: program (+ heap), dynamic libraries, libc, ld.so, stack (which includes the dynamic table loaded into memory) For ELF, the "weird machine" is found and exploited in the loader. ELF can be crafted for executing viruses, by tricking runtime into executing interpreted "code" in the ELF symbol table. One can inject parasitic "code" without modifying the actual ELF code portions. Think of the ELF symbol table as an "assembly language" interpreter. It has these elements: instructions: Add, move, jump if not 0 (jnz) Think of symbol table entries as "registers" symbol table value is "contents" immediate values are constants direct values are addresses (e.g., 0xdeadbeef) move instruction: is a relocation table entry add instruction: relocation table "addend" entry jnz instruction: takes multiple relocation table entries The ELF weird machine exploits the loader by relocating relocation table entries. The loader will go on forever until told to stop. It stores state on stack at "end" and uses IFUNC table entries (containing function pointer address). The ELF weird machine, called "Brainfu*k" (BF) has: 8 instructions: pointer inc, dec, inc indirect, dec indirect, jump forward, jump backward, print. Three registers - 3 registers Bx showed example BF source code that implemented a Turing machine printing "hello, world". More interesting was the next demo, where bx modified ping. Ping runs suid as root, but quickly drops privilege. BF modified the loader to disable the library function call dropping privilege, so it remained as root. Then BF modified the ping -t argument to execute the -t filename as root. It's best to show what this modified ping does with an example: $ whoami bx $ ping localhost -t backdoor.sh # executes backdoor $ whoami root $ The modified code increased from 285948 bytes to 290209 bytes. A BF tool compiles "executable" by modifying the symbol table in an existing ELF executable. The tool modifies .dynsym and .rela.dyn table, but not code or data. Privacy at the Handset: New FCC Rules? "Valkyrie" (Christie Dudley, Santa Clara Law JD candidate) Valkyrie talked about mobile handset privacy. Some background: Senator Franken (also a comedian) became alarmed about CarrierIQ, where the carriers track their customers. Franken asked the FCC to find out what obligations carriers think they have to protect privacy. The carriers' response was that they are doing just fine with self-regulation—no worries! Carriers need to collect data, such as missed calls, to maintain network quality. But carriers also sell data for marketing. Verizon sells customer data and enables this with a narrow privacy policy (only 1 month to opt out, with difficulties). The data sold is not individually identifiable and is aggregated. But Verizon recommends, as an aggregation workaround to "recollate" data to other databases to identify customers indirectly. The FCC has regulated telephone privacy since 1934 and mobile network privacy since 2007. Also, the carriers say mobile phone privacy is a FTC responsibility (not FCC). FTC is trying to improve mobile app privacy, but FTC has no authority over carrier / customer relationships. As a side note, Apple iPhones are unique as carriers have extra control over iPhones they don't have with other smartphones. As a result iPhones may be more regulated. Who are the consumer advocates? Everyone knows EFF, but EPIC (Electrnic Privacy Info Center), although more obsecure, is more relevant. What to do? Carriers must be accountable. Opt-in and opt-out at any time. Carriers need incentive to grant users control for those who want it, by holding them liable and responsible for breeches on their clock. Location information should be added current CPNI privacy protection, and require "Pen/trap" judicial order to obtain (and would still be a lower standard than 4th Amendment). Politics are on a pro-privacy swing now, with many senators and the Whitehouse. There will probably be new regulation soon, and enforcement will be a problem, but consumers will still have some benefit. Hacking Measured Boot and UEFI Dan Griffin, JWSecure, Inc., Seattle, @JWSdan Dan talked about hacking measured UEFI boot. First some terms: UEFI is a boot technology that is replacing BIOS (has whitelisting and blacklisting). UEFI protects devices against rootkits. TPM - hardware security device to store hashs and hardware-protected keys "secure boot" can control at firmware level what boot images can boot "measured boot" OS feature that tracks hashes (from BIOS, boot loader, krnel, early drivers). "remote attestation" allows remote validation and control based on policy on a remote attestation server. Microsoft pushing TPM (Windows 8 required), but Google is not. Intel TianoCore is the only open source for UEFI. Dan has Measured Boot Tool at http://mbt.codeplex.com/ with a demo where you can also view TPM data. TPM support already on enterprise-class machines. UEFI Weaknesses. UEFI toolkits are evolving rapidly, but UEFI has weaknesses: assume user is an ally trust TPM implicitly, and attached to computer hibernate file is unprotected (disk encryption protects against this) protection migrating from hardware to firmware delays in patching and whitelist updates will UEFI really be adopted by the mainstream (smartphone hardware support, bank support, apathetic consumer support) You Can't Buy Security: Building the Open Source InfoSec Program Boris Sverdlik, ISDPodcast.com co-host Boris talked about problems typical with current security audits. "IT Security" is an oxymoron—IT exists to enable buiness, uptime, utilization, reporting, but don't care about security—IT has conflict of interest. There's no Magic Bullet ("blinky box"), no one-size-fits-all solution (e.g., Intrusion Detection Systems (IDSs)). Regulations don't make you secure. The cloud is not secure (because of shared data and admin access). Defense and pen testing is not sexy. Auditors are not solution (security not a checklist)—what's needed is experience and adaptability—need soft skills. Step 1: First thing is to Google and learn the company end-to-end before you start. Get to know the management team (not IT team), meet as many people as you can. Don't use arbitrary values such as CISSP scores. Quantitive risk assessment is a myth (e.g. AV*EF-SLE). Learn different Business Units, legal/regulatory obligations, learn the business and where the money is made, verify company is protected from script kiddies (easy), learn sensitive information (IP, internal use only), and start with low-hanging fruit (customer service reps and social engineering). Step 2: Policies. Keep policies short and relevant. Generic SANS "security" boilerplate policies don't make sense and are not followed. Focus on acceptable use, data usage, communications, physical security. Step 3: Implementation: keep it simple stupid. Open source, although useful, is not free (implementation cost). Access controls with authentication & authorization for local and remote access. MS Windows has it, otherwise use OpenLDAP, OpenIAM, etc. Application security Everyone tries to reinvent the wheel—use existing static analysis tools. Review high-risk apps and major revisions. Don't run different risk level apps on same system. Assume host/client compromised and use app-level security control. Network security VLAN != segregated because there's too many workarounds. Use explicit firwall rules, active and passive network monitoring (snort is free), disallow end user access to production environment, have a proxy instead of direct Internet access. Also, SSL certificates are not good two-factor auth and SSL does not mean "safe." Operational Controls Have change, patch, asset, & vulnerability management (OSSI is free). For change management, always review code before pushing to production For logging, have centralized security logging for business-critical systems, separate security logging from administrative/IT logging, and lock down log (as it has everything). Monitor with OSSIM (open source). Use intrusion detection, but not just to fulfill a checkbox: build rules from a whitelist perspective (snort). OSSEC has 95% of what you need. Vulnerability management is a QA function when done right: OpenVas and Seccubus are free. Security awareness The reality is users will always click everything. Build real awareness, not compliance driven checkbox, and have it integrated into the culture. Pen test by crowd sourcing—test with logging COSSP http://www.cossp.org/ - Comprehensive Open Source Security Project What Journalists Want: The Investigative Reporters' Perspective on Hacking Dave Maas, San Diego CityBeat Jason Leopold, Truthout.org The difference between hackers and investigative journalists: For hackers, the motivation varies, but method is same, technological specialties. For investigative journalists, it's about one thing—The Story, and they need broad info-gathering skills. J-School in 60 Seconds: Generic formula: Person or issue of pubic interest, new info, or angle. Generic criteria: proximity, prominence, timeliness, human interest, oddity, or consequence. Media awareness of hackers and trends: journalists becoming extremely aware of hackers with congressional debates (privacy, data breaches), demand for data-mining Journalists, use of coding and web development for Journalists, and Journalists busted for hacking (Murdock). Info gathering by investigative journalists include Public records laws. Federal Freedom of Information Act (FOIA) is good, but slow. California Public Records Act is a lot stronger. FOIA takes forever because of foot-dragging—it helps to be specific. Often need to sue (especially FBI). CPRA is faster, and requests can be vague. Dumps and leaks (a la Wikileaks) Journalists want: leads, protecting ourselves, our sources, and adapting tools for news gathering (Google hacking). Anonomity is important to whistleblowers. They want no digital footprint left behind (e.g., email, web log). They don't trust encryption, want to feel safe and secure. Whistleblower laws are very weak—there's no upside for whistleblowers—they have to be very passionate to do it. Accessibility and Security or: How I Learned to Stop Worrying and Love the Halting Problem Anna Shubina, Dartmouth College Anna talked about how accessibility and security are related. Accessibility of digital content (not real world accessibility). mostly refers to blind users and screenreaders, for our purpose. Accessibility is about parsing documents, as are many security issues. "Rich" executable content causes accessibility to fail, and often causes security to fail. For example MS Word has executable format—it's not a document exchange format—more dangerous than PDF or HTML. Accessibility is often the first and maybe only sanity check with parsing. They have no choice because someone may want to read what you write. Google, for example, is very particular about web browser you use and are bad at supporting other browsers. Uses JavaScript instead of links, often requiring mouseover to display content. PDF is a security nightmare. Executible format, embedded flash, JavaScript, etc. 15 million lines of code. Google Chrome doesn't handle PDF correctly, causing several security bugs. PDF has an accessibility checker and PDF tagging, to help with accessibility. But no PDF checker checks for incorrect tags, untagged content, or validates lists or tables. None check executable content at all. The "Halting Problem" is: can one decide whether a program will ever stop? The answer, in general, is no (Rice's theorem). The same holds true for accessibility checkers. Language-theoretic Security says complicated data formats are hard to parse and cannot be solved due to the Halting Problem. W3C Web Accessibility Guidelines: "Perceivable, Operable, Understandable, Robust" Not much help though, except for "Robust", but here's some gems: * all information should be parsable (paraphrasing) * if not parsable, cannot be converted to alternate formats * maximize compatibility in new document formats Executible webpages are bad for security and accessibility. They say it's for a better web experience. But is it necessary to stuff web pages with JavaScript for a better experience? A good example is The Drudge Report—it has hand-written HTML with no JavaScript, yet drives a lot of web traffic due to good content. A bad example is Google News—hidden scrollbars, guessing user input. Solutions: Accessibility and security problems come from same source Expose "better user experience" myth Keep your corner of Internet parsable Remember "Halting Problem"—recognize false solutions (checking and verifying tools) Stop Patching, for Stronger PCI Compliance Adam Brand, protiviti @adamrbrand, http://www.picfun.com/ Adam talked about PCI compliance for retail sales. Take an example: for PCI compliance, 50% of Brian's time (a IT guy), 960 hours/year was spent patching POSs in 850 restaurants. Often applying some patches make no sense (like fixing a browser vulnerability on a server). "Scanner worship" is overuse of vulnerability scanners—it gives a warm and fuzzy and it's simple (red or green results—fix reds). Scanners give a false sense of security. In reality, breeches from missing patches are uncommon—more common problems are: default passwords, cleartext authentication, misconfiguration (firewall ports open). Patching Myths: Myth 1: install within 30 days of patch release (but PCI §6.1 allows a "risk-based approach" instead). Myth 2: vendor decides what's critical (also PCI §6.1). But §6.2 requires user ranking of vulnerabilities instead. Myth 3: scan and rescan until it passes. But PCI §11.2.1b says this applies only to high-risk vulnerabilities. Adam says good recommendations come from NIST 800-40. Instead use sane patching and focus on what's really important. From NIST 800-40: Proactive: Use a proactive vulnerability management process: use change control, configuration management, monitor file integrity. Monitor: start with NVD and other vulnerability alerts, not scanner results. Evaluate: public-facing system? workstation? internal server? (risk rank) Decide:on action and timeline Test: pre-test patches (stability, functionality, rollback) for change control Install: notify, change control, tickets McAfee Secure & Trustmarks — a Hacker's Best Friend Jay James, Shane MacDougall, Tactical Intelligence Inc., Canada "McAfee Secure Trustmark" is a website seal marketed by McAfee. A website gets this badge if they pass their remote scanning. The problem is a removal of trustmarks act as flags that you're vulnerable. Easy to view status change by viewing McAfee list on website or on Google. "Secure TrustGuard" is similar to McAfee. Jay and Shane wrote Perl scripts to gather sites from McAfee and search engines. If their certification image changes to a 1x1 pixel image, then they are longer certified. Their scripts take deltas of scans to see what changed daily. The bottom line is change in TrustGuard status is a flag for hackers to attack your site. Entire idea of seals is silly—you're raising a flag saying if you're vulnerable.

  Read the article

• Rounded Corners and Shadows &ndash; Dialogs with CSS

  - by Rick Strahl

  Well, it looks like we’ve finally arrived at a place where at least all of the latest versions of main stream browsers support rounded corners and box shadows. The two CSS properties that make this possible are box-shadow and box-radius. Both of these CSS Properties now supported in all the major browsers as shown in this chart from QuirksMode: In it’s simplest form you can use box-shadow and border radius like this: .boxshadow { -moz-box-shadow: 3px 3px 5px #535353; -webkit-box-shadow: 3px 3px 5px #535353; box-shadow: 3px 3px 5px #535353; } .roundbox { -moz-border-radius: 6px 6px 6px 6px; -webkit-border-radius: 6px; border-radius: 6px 6px 6px 6px; } box-shadow: horizontal-shadow-pixels vertical-shadow-pixels blur-distance shadow-color box-shadow attributes specify the the horizontal and vertical offset of the shadow, the blur distance (to give the shadow a smooth soft look) and a shadow color. The spec also supports multiple shadows separated by commas using the attributes above but we’re not using that functionality here. box-radius: top-left-radius top-right-radius bottom-right-radius bottom-left-radius border-radius takes a pixel size for the radius for each corner going clockwise. CSS 3 also specifies each of the individual corner elements such as border-top-left-radius, but support for these is much less prevalent so I would recommend not using them for now until support improves. Instead use the single box-radius to specify all corners. Browser specific Support in older Browsers Notice that there are two variations: The actual CSS 3 properties (box-shadow and box-radius) and the browser specific ones (-moz, –webkit prefixes for FireFox and Chrome/Safari respectively) which work in slightly older versions of modern browsers before official CSS 3 support was added. The goal is to spread support as widely as possible and the prefix versions extend the range slightly more to those browsers that provided early support for these features. Notice that box-shadow and border-radius are used after the browser specific versions to ensure that the latter versions get precedence if the browser supports both (last assignment wins). Use the .boxshadow and .roundbox Styles in HTML To use these two styles create a simple rounded box with a shadow you can use HTML like this: <!-- Simple Box with rounded corners and shadow --> <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="boxcontenttext"> Simple Rounded Corner Box. </div> </div> which looks like this in the browser: This works across browsers and it’s pretty sweet and simple. Watch out for nested Elements! There are a couple of things to be aware of however when using rounded corners. Specifically, you need to be careful when you nest other non-transparent content into the rounded box. For example check out what happens when I change the inside <div> to have a colored background: <!-- Simple Box with rounded corners and shadow --> <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="boxcontenttext" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> which renders like this:   If you look closely you’ll find that the inside <div>’s corners are not rounded and so ‘poke out’ slightly over the rounded corners. It looks like the rounded corners are ‘broken’ up instead of a solid rounded line around the corner, which his pretty ugly. The bigger the radius the more drastic this effect becomes . To fix this issue the inner <div> also has have rounded corners at the same or slightly smaller radius than the outer <div>. The simple fix for this is to simply also apply the roundbox style to the inner <div> in addition to the boxcontenttext style already applied: <div class="boxcontenttext roundbox" style="background: khaki;"> The fixed display now looks proper: Separate Top and Bottom Elements This gets even a little more tricky if you have an element at the top or bottom only of the rounded box. What if you need to add something like a header or footer <div> that have non-transparent backgrounds which is a pretty common scenario? In those cases you want only the top or bottom corners rounded and not both. To make this work a couple of additional styles to round only the top and bottom corners can be created: .roundbox-top { -moz-border-radius: 4px 4px 0 0; -webkit-border-radius: 4px 4px 0 0; border-radius: 4px 4px 0 0; } .roundbox-bottom { -moz-border-radius: 0 0 4px 4px; -webkit-border-radius: 0 0 4px 4px; border-radius: 0 0 4px 4px; } Notice that radius used for the ‘inside’ rounding is smaller (4px) than the outside radius (6px). This is so the inner radius fills into the outer border – if you use the same size you may have some white space showing between inner and out rounded corners. Experiment with values to see what works – in my experimenting the behavior across browsers here is consistent (thankfully). These styles can be applied in addition to other styles to make only the top or bottom portions of an element rounded. For example imagine I have styles like this: .gridheader, .gridheaderbig, .gridheaderleft, .gridheaderright { padding: 4px 4px 4px 4px; background: #003399 url(images/vertgradient.png) repeat-x; text-align: center; font-weight: bold; text-decoration: none; color: khaki; } .gridheaderleft { text-align: left; } .gridheaderright { text-align: right; } .gridheaderbig { font-size: 135%; } If I just apply say gridheader by itself in HTML like this: <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="gridheaderleft">Box with a Header</div> <div class="boxcontenttext" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> This results in a pretty funky display – again due to the fact that the inner elements render square rather than rounded corners: If you look close again you can see that both the header and the main content have square edges which jumps out at the eye. To fix this you can now apply the roundbox-top and roundbox-bottom to the header and content respectively: <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="gridheaderleft roundbox-top">Box with a Header</div> <div class="boxcontenttext roundbox-bottom" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> Which now gives the proper display with rounded corners both on the top and bottom: All of this is sweet to be supported – at least by the newest browser – without having to resort to images and nasty JavaScripts solutions. While this is still not a mainstream feature yet for the majority of actually installed browsers, the majority of browser users are very likely to have this support as most browsers other than IE are actively pushing users to upgrade to newer versions. Since this is a ‘visual display only feature it degrades reasonably well in non-supporting browsers: You get an uninteresting square and non-shadowed browser box, but the display is still overall functional. The main sticking point – as always is Internet Explorer versions 8.0 and down as well as older versions of other browsers. With those browsers you get a functional view that is a little less interesting to look at obviously: but at least it’s still functional. Maybe that’s just one more incentive for people using older browsers to upgrade to a  more modern browser :-) Creating Dialog Related Styles In a lot of my AJAX based applications I use pop up windows which effectively work like dialogs. Using the simple CSS behaviors above, it’s really easy to create some fairly nice looking overlaid windows with nothing but CSS. Here’s what a typical ‘dialog’ I use looks like: The beauty of this is that it’s plain CSS – no plug-ins or images (other than the gradients which are optional) required. Add jQuery-ui draggable (or ww.jquery.js as shown below) and you have a nice simple inline implementation of a dialog represented by a simple <div> tag. Here’s the HTML for this dialog: <div id="divDialog" class="dialog boxshadow" style="width: 450px;"> <div class="dialog-header"> <div class="closebox"></div> User Sign-in </div> <div class="dialog-content"> <label>Username:</label> <input type="text" name="txtUsername" value=" " /> <label>Password</label> <input type="text" name="txtPassword" value=" " /> <hr /> <input type="button" id="btnLogin" value="Login" /> </div> <div class="dialog-statusbar">Ready</div> </div> Most of this behavior is driven by the ‘dialog’ styles which are fairly basic and easy to understand. They do use a few support images for the gradients which are provided in the sample I’ve provided. Here’s what the CSS looks like: .dialog { background: White; overflow: hidden; border: solid 1px steelblue; -moz-border-radius: 6px 6px 4px 4px; -webkit-border-radius: 6px 6px 4px 4px; border-radius: 6px 6px 3px 3px; } .dialog-header { background-image: url(images/dialogheader.png); background-repeat: repeat-x; text-align: left; color: cornsilk; padding: 5px; padding-left: 10px; font-size: 1.02em; font-weight: bold; position: relative; -moz-border-radius: 4px 4px 0px 0px; -webkit-border-radius: 4px 4px 0px 0px; border-radius: 4px 4px 0px 0px; } .dialog-top { -moz-border-radius: 4px 4px 0px 0px; -webkit-border-radius: 4px 4px 0px 0px; border-radius: 4px 4px 0px 0px; } .dialog-bottom { -moz-border-radius: 0 0 3px 3px; -webkit-border-radius: 0 0 3px 3px; border-radius: 0 0 3px 3px; } .dialog-content { padding: 15px; } .dialog-statusbar, .dialog-toolbar { background: #eeeeee; background-image: url(images/dialogstrip.png); background-repeat: repeat-x; padding: 5px; padding-left: 10px; border-top: solid 1px silver; border-bottom: solid 1px silver; font-size: 0.8em; } .dialog-statusbar { -moz-border-radius: 0 0 3px 3px; -webkit-border-radius: 0 0 3px 3px; border-radius: 0 0 3px 3px; padding-right: 10px; } .closebox { position: absolute; right: 2px; top: 2px; background-image: url(images/close.gif); background-repeat: no-repeat; width: 14px; height: 14px; cursor: pointer; opacity: 0.60; filter: alpha(opacity="80"); } .closebox:hover { opacity: 1; filter: alpha(opacity="100"); } The main style is the dialog class which is the outer box. It has the rounded border that serves as the outline. Note that I didn’t add the box-shadow to this style because in some situations I just want the rounded box in an inline display that doesn’t have a shadow so it’s still applied separately. dialog-header, then has the rounded top corners and displays a typical dialog heading format. dialog-bottom and dialog-top then provide the same functionality as roundbox-top and roundbox-bottom described earlier but are provided mainly in the stylesheet for consistency to match the dialog’s round edges and making it easier to  remember and find in Intellisense as it shows up in the same dialog- group. dialog-statusbar and dialog-toolbar are two elements I use a lot for floating windows – the toolbar serves for buttons and options and filters typically, while the status bar provides information specific to the floating window. Since the the status bar is always on the bottom of the dialog it automatically handles the rounding of the bottom corners. Finally there’s  closebox style which is to be applied to an empty <div> tag in the header typically. What this does is render a close image that is by default low-lighted with a low opacity value, and then highlights when hovered over. All you’d have to do handle the close operation is handle the onclick of the <div>. Note that the <div> right aligns so typically you should specify it before any other content in the header. Speaking of closable – some time ago I created a closable jQuery plug-in that basically automates this process and can be applied against ANY element in a page, automatically removing or closing the element with some simple script code. Using this you can leave out the <div> tag for closable and just do the following: To make the above dialog closable (and draggable) which makes it effectively and overlay window, you’d add jQuery.js and ww.jquery.js to the page: <script type="text/javascript" src="../../scripts/jquery.min.js"></script> <script type="text/javascript" src="../../scripts/ww.jquery.min.js"></script> and then simply call: <script type="text/javascript"> $(document).ready(function () { $("#divDialog") .draggable({ handle: ".dialog-header" }) .closable({ handle: ".dialog-header", closeHandler: function () { alert("Window about to be closed."); return true; // true closes - false leaves open } }); }); </script> * ww.jquery.js emulates base features in jQuery-ui’s draggable. If jQuery-ui is loaded its draggable version will be used instead and voila you have now have a draggable and closable window – here in mid-drag:   The dragging and closable behaviors are of course optional, but it’s the final touch that provides dialog like window behavior. Relief for older Internet Explorer Versions with CSS Pie If you want to get these features to work with older versions of Internet Explorer all the way back to version 6 you can check out CSS Pie. CSS Pie provides an Internet Explorer behavior file that attaches to specific CSS rules and simulates these behavior using script code in IE (mostly by implementing filters). You can simply add the behavior to each CSS style that uses box-shadow and border-radius like this: .boxshadow {     -moz-box-shadow: 3px 3px 5px #535353;     -webkit-box-shadow: 3px 3px 5px #535353;           box-shadow: 3px 3px 5px #535353;     behavior: url(scripts/PIE.htc);           } .roundbox {      -moz-border-radius: 6px 6px 6px 6px;     -webkit-border-radius: 6px;      border-radius: 6px 6px 6px 6px;     behavior: url(scripts/PIE.htc); } CSS Pie requires the PIE.htc on your server and referenced from each CSS style that needs it. Note that the url() for IE behaviors is NOT CSS file relative as other CSS resources, but rather PAGE relative , so if you have more than one folder you probably need to reference the HTC file with a fixed path like this: behavior: url(/MyApp/scripts/PIE.htc); in the style. Small price to pay, but a royal pain if you have a common CSS file you use in many applications. Once the PIE.htc file has been copied and you have applied the behavior to each style that uses these new features Internet Explorer will render rounded corners and box shadows! Yay! Hurray for box-shadow and border-radius All of this functionality is very welcome natively in the browser. If you think this is all frivolous visual candy, you might be right :-), but if you take a look on the Web and search for rounded corner solutions that predate these CSS attributes you’ll find a boatload of stuff from image files, to custom drawn content to Javascript solutions that play tricks with a few images. It’s sooooo much easier to have this functionality built in and I for one am glad to see that’s it’s finally becoming standard in the box. Still remember that when you use these new CSS features, they are not universal, and are not going to be really soon. Legacy browsers, especially old versions of Internet Explorer that can’t be updated will continue to be around and won’t work with this shiny new stuff. I say screw ‘em: Let them get a decent recent browser or see a degraded and ugly UI. We have the luxury with this functionality in that it doesn’t typically affect usability – it just doesn’t look as nice. Resources Download the Sample The sample includes the styles and images and sample page as well as ww.jquery.js for the draggable/closable example. Online Sample Check out the sample described in this post online. Closable and Draggable Documentation Documentation for the closeable and draggable plug-ins in ww.jquery.js. You can also check out the full documentation for all the plug-ins contained in ww.jquery.js here. © Rick Strahl, West Wind Technologies, 2005-2011Posted in HTML  CSS  

  Read the article

• High CPU usage with Team Speak 3.0.0-rc2

  - by AlexTheBird

  The CPU usage is always around 40 percent. I use push-to-talk and I had uninstalled pulseaudio. Now I use Alsa. I don't even have to connect to a Server. By simply starting TS the cpu usage goes up 40 percent and stays there. The CPU usage of 3.0.0-rc1 [Build: 14468] is constantly 14 percent. This is the output of top, mpstat and ps aux while I am running TS3 ... of course: alexandros@alexandros-laptop:~$ top top - 18:20:07 up 2:22, 3 users, load average: 1.02, 0.85, 0.77 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie Cpu(s): 5.3%us, 1.9%sy, 0.1%ni, 91.8%id, 0.7%wa, 0.1%hi, 0.1%si, 0.0%st Mem: 2061344k total, 964028k used, 1097316k free, 69116k buffers Swap: 3997688k total, 0k used, 3997688k free, 449032k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2714 alexandr 20 0 206m 31m 24m S 37 1.6 0:12.78 ts3client_linux 868 root 20 0 47564 27m 10m S 8 1.4 3:21.73 Xorg 1 root 20 0 2804 1660 1204 S 0 0.1 0:00.53 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.01 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.45 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.08 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:01.17 events/0 10 root 20 0 0 0 0 S 0 0.0 0:00.81 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 14 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.00 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.05 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.99 ata/0 26 root 20 0 0 0 0 S 0 0.0 0:00.92 ata/1 27 root 20 0 0 0 0 S 0 0.0 0:00.00 ata_aux 28 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 29 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd alexandros@alexandros-laptop:~$ mpstat Linux 2.6.32-32-generic (alexandros-laptop) 16.06.2011 _i686_ (2 CPU) 18:20:15 CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle 18:20:15 all 5,36 0,09 1,91 0,68 0,07 0,06 0,00 0,00 91,83 alexandros@alexandros-laptop:~$ ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 2804 1660 ? Ss 15:58 0:00 /sbin/init root 2 0.0 0.0 0 0 ? S 15:58 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S 15:58 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S 15:58 0:00 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S 15:58 0:00 [watchdog/0] root 6 0.0 0.0 0 0 ? S 15:58 0:00 [migration/1] root 7 0.0 0.0 0 0 ? S 15:58 0:00 [ksoftirqd/1] root 8 0.0 0.0 0 0 ? S 15:58 0:00 [watchdog/1] root 9 0.0 0.0 0 0 ? S 15:58 0:01 [events/0] root 10 0.0 0.0 0 0 ? S 15:58 0:00 [events/1] root 11 0.0 0.0 0 0 ? S 15:58 0:00 [cpuset] root 12 0.0 0.0 0 0 ? S 15:58 0:00 [khelper] root 13 0.0 0.0 0 0 ? S 15:58 0:00 [async/mgr] root 14 0.0 0.0 0 0 ? S 15:58 0:00 [pm] root 16 0.0 0.0 0 0 ? S 15:58 0:00 [sync_supers] root 17 0.0 0.0 0 0 ? S 15:58 0:00 [bdi-default] root 18 0.0 0.0 0 0 ? S 15:58 0:00 [kintegrityd/0] root 19 0.0 0.0 0 0 ? S 15:58 0:00 [kintegrityd/1] root 20 0.0 0.0 0 0 ? S 15:58 0:00 [kblockd/0] root 21 0.0 0.0 0 0 ? S 15:58 0:00 [kblockd/1] root 22 0.0 0.0 0 0 ? S 15:58 0:00 [kacpid] root 23 0.0 0.0 0 0 ? S 15:58 0:00 [kacpi_notify] root 24 0.0 0.0 0 0 ? S 15:58 0:00 [kacpi_hotplug] root 25 0.0 0.0 0 0 ? S 15:58 0:00 [ata/0] root 26 0.0 0.0 0 0 ? S 15:58 0:00 [ata/1] root 27 0.0 0.0 0 0 ? S 15:58 0:00 [ata_aux] root 28 0.0 0.0 0 0 ? S 15:58 0:00 [ksuspend_usbd] root 29 0.0 0.0 0 0 ? S 15:58 0:00 [khubd] root 30 0.0 0.0 0 0 ? S 15:58 0:00 [kseriod] root 31 0.0 0.0 0 0 ? S 15:58 0:00 [kmmcd] root 34 0.0 0.0 0 0 ? S 15:58 0:00 [khungtaskd] root 35 0.0 0.0 0 0 ? S 15:58 0:00 [kswapd0] root 36 0.0 0.0 0 0 ? SN 15:58 0:00 [ksmd] root 37 0.0 0.0 0 0 ? S 15:58 0:00 [aio/0] root 38 0.0 0.0 0 0 ? S 15:58 0:00 [aio/1] root 39 0.0 0.0 0 0 ? S 15:58 0:00 [ecryptfs-kthrea] root 40 0.0 0.0 0 0 ? S 15:58 0:00 [crypto/0] root 41 0.0 0.0 0 0 ? S 15:58 0:00 [crypto/1] root 48 0.0 0.0 0 0 ? S 15:58 0:03 [scsi_eh_0] root 50 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_1] root 53 0.0 0.0 0 0 ? S 15:58 0:00 [kstriped] root 54 0.0 0.0 0 0 ? S 15:58 0:00 [kmpathd/0] root 55 0.0 0.0 0 0 ? S 15:58 0:00 [kmpathd/1] root 56 0.0 0.0 0 0 ? S 15:58 0:00 [kmpath_handlerd] root 57 0.0 0.0 0 0 ? S 15:58 0:00 [ksnapd] root 58 0.0 0.0 0 0 ? S 15:58 0:03 [kondemand/0] root 59 0.0 0.0 0 0 ? S 15:58 0:02 [kondemand/1] root 60 0.0 0.0 0 0 ? S 15:58 0:00 [kconservative/0] root 61 0.0 0.0 0 0 ? S 15:58 0:00 [kconservative/1] root 213 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_2] root 222 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_3] root 234 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_4] root 235 0.0 0.0 0 0 ? S 15:58 0:01 [usb-storage] root 255 0.0 0.0 0 0 ? S 15:58 0:00 [jbd2/sda5-8] root 256 0.0 0.0 0 0 ? S 15:58 0:00 [ext4-dio-unwrit] root 257 0.0 0.0 0 0 ? S 15:58 0:00 [ext4-dio-unwrit] root 290 0.0 0.0 0 0 ? S 15:58 0:00 [flush-8:0] root 318 0.0 0.0 2316 888 ? S 15:58 0:00 upstart-udev-bridge --daemon root 321 0.0 0.0 2616 1024 ? S<s 15:58 0:00 udevd --daemon root 526 0.0 0.0 0 0 ? S 15:58 0:00 [kpsmoused] root 528 0.0 0.0 0 0 ? S 15:58 0:00 [led_workqueue] root 650 0.0 0.0 0 0 ? S 15:58 0:00 [radeon/0] root 651 0.0 0.0 0 0 ? S 15:58 0:00 [radeon/1] root 652 0.0 0.0 0 0 ? S 15:58 0:00 [ttm_swap] root 654 0.0 0.0 2612 984 ? S< 15:58 0:00 udevd --daemon root 656 0.0 0.0 0 0 ? S 15:58 0:00 [hd-audio0] root 657 0.0 0.0 2612 916 ? S< 15:58 0:00 udevd --daemon root 674 0.6 0.0 0 0 ? S 15:58 0:57 [phy0] syslog 715 0.0 0.0 34812 1776 ? Sl 15:58 0:00 rsyslogd -c4 102 731 0.0 0.0 3236 1512 ? Ss 15:58 0:02 dbus-daemon --system --fork root 740 0.0 0.1 19088 3380 ? Ssl 15:58 0:00 gdm-binary root 744 0.0 0.1 18900 4032 ? Ssl 15:58 0:01 NetworkManager avahi 749 0.0 0.0 2928 1520 ? S 15:58 0:00 avahi-daemon: running [alexandros-laptop.local] avahi 752 0.0 0.0 2928 544 ? Ss 15:58 0:00 avahi-daemon: chroot helper root 753 0.0 0.1 4172 2300 ? S 15:58 0:00 /usr/sbin/modem-manager root 762 0.0 0.1 20584 3152 ? Sl 15:58 0:00 /usr/sbin/console-kit-daemon --no-daemon root 836 0.0 0.1 20856 3864 ? Sl 15:58 0:00 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Display1 root 856 0.0 0.1 4836 2388 ? S 15:58 0:00 /sbin/wpa_supplicant -u -s root 868 2.3 1.3 36932 27924 tty7 Rs+ 15:58 3:22 /usr/bin/X :0 -nr -verbose -auth /var/run/gdm/auth-for-gdm-a46T4j/database -nolisten root 891 0.0 0.0 1792 564 tty4 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty4 root 901 0.0 0.0 1792 564 tty5 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty5 root 908 0.0 0.0 1792 564 tty2 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty2 root 910 0.0 0.0 1792 568 tty3 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty3 root 913 0.0 0.0 1792 564 tty6 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty6 root 917 0.0 0.0 2180 1072 ? Ss 15:58 0:00 acpid -c /etc/acpi/events -s /var/run/acpid.socket daemon 924 0.0 0.0 2248 432 ? Ss 15:58 0:00 atd root 927 0.0 0.0 2376 900 ? Ss 15:58 0:00 cron root 950 0.0 0.0 11736 1372 ? Ss 15:58 0:00 /usr/sbin/winbindd root 958 0.0 0.0 11736 1184 ? S 15:58 0:00 /usr/sbin/winbindd root 974 0.0 0.1 6832 2580 ? Ss 15:58 0:00 /usr/sbin/cupsd -C /etc/cups/cupsd.conf root 1078 0.0 0.0 1792 564 tty1 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty1 gdm 1097 0.0 0.0 3392 772 ? S 15:58 0:00 /usr/bin/dbus-launch --exit-with-session root 1112 0.0 0.1 19216 3292 ? Sl 15:58 0:00 /usr/lib/gdm/gdm-session-worker root 1116 0.0 0.1 5540 2932 ? S 15:58 0:01 /usr/lib/upower/upowerd root 1131 0.0 0.1 6308 3824 ? S 15:58 0:00 /usr/lib/policykit-1/polkitd 108 1163 0.0 0.2 16788 4360 ? Ssl 15:58 0:01 /usr/sbin/hald root 1164 0.0 0.0 3536 1300 ? S 15:58 0:00 hald-runner root 1188 0.0 0.0 3612 1256 ? S 15:58 0:00 hald-addon-input: Listening on /dev/input/event6 /dev/input/event5 /dev/input/event2 root 1194 0.0 0.0 3612 1224 ? S 15:58 0:00 /usr/lib/hal/hald-addon-rfkill-killswitch root 1200 0.0 0.0 3608 1240 ? S 15:58 0:00 /usr/lib/hal/hald-addon-generic-backlight root 1202 0.0 0.0 3616 1236 ? S 15:58 0:02 hald-addon-storage: polling /dev/sr0 (every 2 sec) root 1204 0.0 0.0 3616 1236 ? S 15:58 0:00 hald-addon-storage: polling /dev/sdb (every 2 sec) root 1211 0.0 0.0 3624 1220 ? S 15:58 0:00 /usr/lib/hal/hald-addon-cpufreq 108 1212 0.0 0.0 3420 1200 ? S 15:58 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 1000 1222 0.0 0.1 24196 2816 ? Sl 15:58 0:00 /usr/bin/gnome-keyring-daemon --daemonize --login 1000 1240 0.0 0.3 28228 7312 ? Ssl 15:58 0:00 gnome-session 1000 1274 0.0 0.0 3284 356 ? Ss 15:58 0:00 /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session gnome-session 1000 1277 0.0 0.0 3392 772 ? S 15:58 0:00 /usr/bin/dbus-launch --exit-with-session gnome-session 1000 1278 0.0 0.0 3160 1652 ? Ss 15:58 0:00 /bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 1000 1281 0.0 0.2 8172 4636 ? S 15:58 0:00 /usr/lib/libgconf2-4/gconfd-2 1000 1287 0.0 0.5 24228 10896 ? Ss 15:58 0:03 /usr/lib/gnome-settings-daemon/gnome-settings-daemon 1000 1290 0.0 0.1 6468 2364 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd 1000 1293 0.0 0.6 38104 13004 ? S 15:58 0:03 metacity 1000 1296 0.0 0.1 30280 2628 ? Ssl 15:58 0:00 /usr/lib/gvfs//gvfs-fuse-daemon /home/alexandros/.gvfs 1000 1301 0.0 0.0 3344 988 ? S 15:58 0:03 syndaemon -i 0.5 -k 1000 1303 0.0 0.1 8060 3488 ? S 15:58 0:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor root 1306 0.0 0.1 15692 3104 ? Sl 15:58 0:00 /usr/lib/udisks/udisks-daemon 1000 1307 0.4 1.0 50748 21684 ? S 15:58 0:34 python -u /usr/share/screenlets/DigiClock/DigiClockScreenlet.py 1000 1308 0.0 0.9 35608 18564 ? S 15:58 0:00 python /usr/share/screenlets-manager/screenlets-daemon.py 1000 1309 0.0 0.3 19524 6468 ? S 15:58 0:00 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 1000 1311 0.0 0.5 37412 11788 ? S 15:58 0:01 gnome-power-manager 1000 1312 0.0 1.0 50772 22628 ? S 15:58 0:03 gnome-panel 1000 1313 0.1 1.5 102648 31184 ? Sl 15:58 0:10 nautilus root 1314 0.0 0.0 5188 996 ? S 15:58 0:02 udisks-daemon: polling /dev/sdb /dev/sr0 1000 1315 0.0 0.6 51948 12464 ? SL 15:58 0:01 nm-applet --sm-disable 1000 1317 0.0 0.1 16956 2364 ? Sl 15:58 0:00 /usr/lib/gvfs/gvfs-afc-volume-monitor 1000 1318 0.0 0.3 20164 7792 ? S 15:58 0:00 bluetooth-applet 1000 1321 0.0 0.1 7260 2384 ? S 15:58 0:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor 1000 1323 0.0 0.5 37436 12124 ? S 15:58 0:00 /usr/lib/notify-osd/notify-osd 1000 1324 0.0 1.9 197928 40456 ? Ssl 15:58 0:06 /home/alexandros/.dropbox-dist/dropbox 1000 1329 0.0 0.3 20136 7968 ? S 15:58 0:00 /usr/bin/gnome-screensaver --no-daemon 1000 1331 0.0 0.1 7056 3112 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-trash --spawner :1.6 /org/gtk/gvfs/exec_spaw/0 root 1340 0.0 0.0 2236 1008 ? S 15:58 0:00 /sbin/dhclient -d -sf /usr/lib/NetworkManager/nm-dhcp-client.action -pf /var/run/dhcl 1000 1348 0.0 0.1 42252 3680 ? Ssl 15:58 0:00 /usr/lib/bonobo-activation/bonobo-activation-server --ac-activate --ior-output-fd=19 1000 1384 0.0 1.7 80244 35480 ? Sl 15:58 0:02 /usr/bin/python /usr/lib/deskbar-applet/deskbar-applet/deskbar-applet --oaf-activate- 1000 1388 0.0 0.5 26196 11804 ? S 15:58 0:01 /usr/lib/gnome-panel/wnck-applet --oaf-activate-iid=OAFIID:GNOME_Wncklet_Factory --oa 1000 1393 0.1 0.5 25876 11548 ? S 15:58 0:08 /usr/lib/gnome-applets/multiload-applet-2 --oaf-activate-iid=OAFIID:GNOME_MultiLoadAp 1000 1394 0.0 0.5 25600 11140 ? S 15:58 0:03 /usr/lib/gnome-applets/cpufreq-applet --oaf-activate-iid=OAFIID:GNOME_CPUFreqApplet_F 1000 1415 0.0 0.5 39192 11156 ? S 15:58 0:01 /usr/lib/gnome-power-manager/gnome-inhibit-applet --oaf-activate-iid=OAFIID:GNOME_Inh 1000 1417 0.0 0.7 53544 15488 ? Sl 15:58 0:00 /usr/lib/gnome-applets/mixer_applet2 --oaf-activate-iid=OAFIID:GNOME_MixerApplet_Fact 1000 1419 0.0 0.4 23816 9068 ? S 15:58 0:00 /usr/lib/gnome-panel/notification-area-applet --oaf-activate-iid=OAFIID:GNOME_Notific 1000 1488 0.0 0.3 20964 7548 ? S 15:58 0:00 /usr/lib/gnome-disk-utility/gdu-notification-daemon 1000 1490 0.0 0.1 6608 2484 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-burn --spawner :1.6 /org/gtk/gvfs/exec_spaw/1 1000 1510 0.0 0.1 6348 2084 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-metadata 1000 1531 0.0 0.3 19472 6616 ? S 15:58 0:00 /usr/lib/gnome-user-share/gnome-user-share 1000 1535 0.0 0.4 77128 8392 ? Sl 15:58 0:00 /usr/lib/evolution/evolution-data-server-2.28 --oaf-activate-iid=OAFIID:GNOME_Evoluti 1000 1601 0.0 0.5 69576 11800 ? Sl 15:59 0:00 /usr/lib/evolution/2.28/evolution-alarm-notify 1000 1604 0.0 0.7 33924 15888 ? S 15:59 0:00 python /usr/share/system-config-printer/applet.py 1000 1701 0.0 0.5 37116 11968 ? S 15:59 0:00 update-notifier 1000 1892 4.5 7.0 406720 145312 ? Sl 17:11 3:09 /opt/google/chrome/chrome 1000 1896 0.0 0.1 69812 3680 ? S 17:11 0:02 /opt/google/chrome/chrome 1000 1898 0.0 0.6 91420 14080 ? S 17:11 0:00 /opt/google/chrome/chrome --type=zygote 1000 1916 0.2 1.3 140780 27220 ? Sl 17:11 0:12 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1918 0.7 1.8 155720 37912 ? Sl 17:11 0:31 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1921 0.0 1.0 135904 21052 ? Sl 17:11 0:02 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1927 6.5 3.6 194604 74960 ? Sl 17:11 4:32 /opt/google/chrome/chrome --type=renderer --disable-client-side-phishing-detection -- 1000 2156 0.4 0.7 48344 14896 ? Rl 18:03 0:04 gnome-terminal 1000 2157 0.0 0.0 1988 712 ? S 18:03 0:00 gnome-pty-helper 1000 2158 0.0 0.1 6504 3860 pts/0 Ss 18:03 0:00 bash 1000 2564 0.2 0.1 6624 3984 pts/1 Ss+ 18:17 0:00 bash 1000 2711 0.0 0.0 4208 1352 ? S 18:19 0:00 /bin/bash /home/alexandros/Programme/TeamSpeak3-Client-linux_x86_back/ts3client_runsc 1000 2714 36.5 1.5 210872 31960 ? SLl 18:19 0:18 ./ts3client_linux_x86 1000 2743 0.0 0.0 2716 1068 pts/0 R+ 18:20 0:00 ps aux Output of vmstat: alexandros@alexandros-laptop:~$ vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 1093324 69840 449496 0 0 27 10 476 667 6 2 91 1 Output of lsusb alexandros@alexandros-laptop:~$ lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon X2300 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) The Team Speak log file : 2011-06-19 19:04:04.223522|INFO | | | Logging started, clientlib version: 3.0.0-rc2 [Build: 14642] 2011-06-19 19:04:04.761149|ERROR |SoundBckndIntf| | /home/alexandros/Programme/TeamSpeak3-Client-linux_x86_back/soundbackends/libpulseaudio_linux_x86.so error: NOT_CONNECTED 2011-06-19 19:04:05.871770|INFO |ClientUI | | Failed to init text to speech engine 2011-06-19 19:04:05.894623|INFO |ClientUI | | TeamSpeak 3 client version: 3.0.0-rc2 [Build: 14642] 2011-06-19 19:04:05.895421|INFO |ClientUI | | Qt version: 4.7.2 2011-06-19 19:04:05.895571|INFO |ClientUI | | Using configuration location: /home/alexandros/.ts3client/ts3clientui_qt.conf 2011-06-19 19:04:06.559596|INFO |ClientUI | | Last update check was: Sa. Jun 18 00:08:43 2011 2011-06-19 19:04:06.560506|INFO | | | Checking for updates... 2011-06-19 19:04:07.357869|INFO | | | Update check, my version: 14642, latest version: 14642 2011-06-19 19:05:52.978481|INFO |PreProSpeex | 1| Speex version: 1.2rc1 2011-06-19 19:05:54.055347|INFO |UIHelpers | | setClientVolumeModifier: 10 -8 2011-06-19 19:05:54.057196|INFO |UIHelpers | | setClientVolumeModifier: 11 2 Thanks for taking the time to read my message. UPDATE: Thanks to nickguletskii's link I googled for "alsa cpu usage" (without quotes) and it brought me to a forum. A user wrote that by directly selecting the hardware with "plughw:x.x" won't impact the performance of the system. I have selected it in the TS 3 configuration and it worked. But this solution is not optimal because now no other program can access the sound output. If you need any further information or my question is unclear than please tell me.

  Read the article

• Configuring Oracle iPlanet WebServer / Oracle Traffic Director to use crypto accelerators on T4-1 servers

  - by mv

  Configuring Oracle iPlanet Web Server / Oracle Traffic Director to use crypto accelerators on T4-1 servers Jyri had written a technical article on Configuring Solaris Cryptographic Framework and Sun Java System Web Server 7 on Systems With UltraSPARC T1 Processors. I tried to find out what has changed since then in T4. I have used a T4-1 SPARC system with Solaris 10. Results slightly vary for Solaris 11.  For Solaris 11, the T4 optimization was implemented in libsoftcrypto.so while it was in pkcs11_softtoken_extra.so for Solaris 10. Overview of T4 processors is here in this blog. Many thanx to Chi-Chang Lin and Julien for their help. 1. Install Oracle iPlanet Web Server / Oracle Traffic Director.  Go to instance/config directory.  # cd /opt/oracle/webserver7/https-hostname.fqdn/config 2. List default PKCS#11 Modules # ../../bin/modutil -dbdir . -listListing of PKCS #11 Modules-----------------------------------------------------------1. NSS Internal PKCS #11 Moduleslots: 2 slots attachedstatus: loadedslot: NSS Internal Cryptographic Servicestoken: NSS Generic Crypto Servicesslot: NSS User Private Key and Certificate Servicestoken: NSS Certificate DB2. Root Certslibrary name: libnssckbi.soslots: 1 slot attachedstatus: loadedslot: NSS Builtin Objectstoken: Builtin Object Token----------------------------------------------------------- 3. Initialize the soft token data store in the $HOME/.sunw/pkcs11_softtoken/ directory # pktool setpin keystore=pkcs11Enter token passphrase: olderpasswordCreate new passphrase: passwordRe-enter new passphrase: passwordPassphrase changed. 4. Offload crypto operations to Solaris Crypto Framework on T4 $ ../../bin/modutil -dbdir . -nocertdb -add SCF -libfile /usr/lib/libpkcs11.so -mechanisms RSA:AES:SHA1:MD5 Module "SCF" added to database. Note that -nocertdb means modutil won't try to open the NSS softoken key database. It doesn't even have to be present. PKCS#11 library used is /usr/lib/libpkcs11.so. If the server is running in 64 bit mode, we have to use /usr/lib/64/libpkcs11.so Unlike T1 and T2, in T4 we do not have to disable mechanisms in softtoken provider using cryptoadm. 5. List again to check that a new module SCF is added # ../../bin/modutil -dbdir . -list Listing of PKCS #11 Modules-----------------------------------------------------------1. NSS Internal PKCS #11 Moduleslots: 2 slots attachedstatus: loadedslot: NSS Internal Cryptographic Servicestoken: NSS Generic Crypto Servicesslot: NSS User Private Key and Certificate Servicestoken: NSS Certificate DB2. SCFlibrary name: /usr/lib/libpkcs11.soslots: 2 slots attachedstatus: loadedslot: Sun Metaslottoken: Sun Metaslotslot: n2rng/0 SUNW_N2_Random_Number_Generator token: n2rng/0 SUNW_N2_RNG 3. Root Certs library name: libnssckbi.so slots: 1 slot attached status: loaded slot: NSS Builtin Objects token: Builtin Object Token----------------------------------------------------------- 6.  Create certificate in “Sun Metaslot” : I have used certutil, but you must use Admin Server CLI / GUI # ../../bin/certutil -S -x -n "Server-Cert" -t "CT,CT,CT" -s "CN=*.fqdn" -d . -h "Sun Metaslot"Enter Password or Pin for "Sun Metaslot": password 7. Verify that the certificate is created properly in “Sun Metslaot” # ../../bin/certutil -L -d . -h "Sun Metaslot"Certificate Nickname Trust AttributesSSL,S/MIME,JAR/XPIEnter Password or Pin for "Sun Metaslot": passwordSun Metaslot:Server-Cert CTu,Cu,Cu# 8. Associate this newly created certificate to http listener using Admin CLI/GUI. After that server.xml should have <http-listener> ...    <ssl>        <server-cert-nickname>Sun Metaslot:Server-Cert</server-cert-nicknamer>    </ssl> Note the prefix "Sun Metaslot" 9. Disable PKCS#11 bypass To use the accelerated AES algorithm, turn off PKCS#11 bypass, and configure modutil to have the AES mechanism go to the Metaslot. After you disable PKCS#11 bypasss using Admin GUI/CLI,  check that server.xml should have <server> ....    <pkcs11>         <enabled>1</enabled>         <allow-bypass>0</allow-bypass>     </pkcs11> With PKCS#11 bypass enabled, Oracle iPlanet Web Server will only use the RSA capability of the T4, provided certificate and key are stored in the T4 slot (Metaslot). Actually, the RSA op is never bypassed in NSS, it's always done with PKCS#11 calls. So the bypass settings won't affect the behavior of the probes for RSA at all. The only thing that matters if where the RSA key and certificate live, ie. which PKCS#11 token, and thus which PKCS#11 module gets called to do the work. If your certificate/key are in the NSS certificate/key db, you will see libsoftokn3/libfreebl libraries doing the RSA work. If they are in the Sun Metaslot, it should be the Solaris code. 10. Start the server instance # ../bin/startserv Oracle iPlanet Web Server 7.0.16 B09/14/2012 03:33Please enter the PIN for the "Sun Metaslot" token: password...info: HTTP3072: http-listener-1: https://hostname.fqdn:80 ready to accept requestsinfo: CORE3274: successful server startup 11. Figure out which process to run this DTrace script on # ps -eaf | grep webservd | grep -v dogwebservd 18224 18223 0 13:17:25 ? 0:07 webservd -d /opt/oracle/webserver7/https-hostname.fqdn/config -r /opt/root 18225 18224 0 13:17:25 ? 0:00 webservd -d /opt/oracle/webserver7/https-hostname.fqdn/config -r /opt/ (For Oracle Traffic Director look for process named "trafficd") We see that the child process id is “18225” 12. Clients for testing : You can use any browser. I used NSS tool tstclnt for testing $cat > req.txtGET /index.html HTTP/1.0 For checking both RSA and AES, I used cipher “:0035” which is TLS_RSA_WITH_AES_256_CBC_SHA $./tstclnt -h hostname -p 80 -d . -T -f -o -v -c “:0035” < req.txt 13. How do I make sure that crypto accelerator is being used 13.1 Create DTrace script The following D script should be able to uncover whether T4-specific crypto routine are being called or not. It also displays stats per second. # cat > t4crypto.d#!/usr/sbin/dtrace -spid$target::*rsa*:entry,pid$target::*yf*:entry{    @ops[probemod, probefunc] = count();}tick-1sec{    printa(@ops);    trunc(@ops);} Invoke with './t4crypto.d -p <pid> ' 13.2 EXPECTED PROBES FOR Solaris 10 : If offloading to T4 HW are correctly set up, the expected DTrace output would have these probes and libraries library Operations PROBES pkcs11_softtoken_extra.so RSA soft_decrypt_rsa_pkcs_decode, soft_encrypt_rsa_pkcs_encode soft_rsa_crypt_init_common soft_rsa_decrypt, soft_rsa_encrypt soft_rsa_decrypt_common, soft_rsa_encrypt_common AES yf_aes_instructions_present yf_aes_expand256, yf_aes256_cbc_decrypt, yf_aes256_cbc_encrypt, yf_aes256_load_keys_for_decrypt, yf_aes256_load_keys_for_encrypt, Note that these are for 256, same for 128, 192... these are for cbc, same for ecb, ctr, cfb128... DES yf_des_expand, yf_des_instructions_present yf_des_encrypt libmd_psr.so MD5 yf_md5_multiblock, yf_md5_instruction_present SHA1 yf_sha1_instruction_present, yf_sha1_multibloc 13.3 SAMPLE OUTPUT FOR CIPHER TLS_RSA_WITH_AES_256_CBC_SHA (0x0035) ON T4 SPARC SOLARIS 10 WITHOUT PKCS#11 BYPASS # ./t4crypto.d -p 18225 pkcs11_softtoken_extra.so.1   soft_decrypt_rsa_pkcs_decode    1 pkcs11_softtoken_extra.so.1   soft_rsa_crypt_init_common      1 pkcs11_softtoken_extra.so.1   soft_rsa_decrypt                1 pkcs11_softtoken_extra.so.1   big_mp_mul_yf                   2 pkcs11_softtoken_extra.so.1   mpm_yf_mpmul                    2 pkcs11_softtoken_extra.so.1   mpmul_arr_yf                    2 pkcs11_softtoken_extra.so.1   rijndael_key_setup_enc_yf       2 pkcs11_softtoken_extra.so.1   soft_rsa_decrypt_common         2 pkcs11_softtoken_extra.so.1   yf_aes_expand256                2 pkcs11_softtoken_extra.so.1   yf_aes256_cbc_decrypt           3 pkcs11_softtoken_extra.so.1   yf_aes256_load_keys_for_decrypt 3 pkcs11_softtoken_extra.so.1   big_mont_mul_yf                 6 pkcs11_softtoken_extra.so.1   mm_yf_montmul                   6 pkcs11_softtoken_extra.so.1   yf_des_instructions_present     6 pkcs11_softtoken_extra.so.1   yf_aes256_cbc_encrypt           8 pkcs11_softtoken_extra.so.1   yf_aes256_load_keys_for_encrypt 8 pkcs11_softtoken_extra.so.1   yf_mpmul_present                8 pkcs11_softtoken_extra.so.1   yf_aes_instructions_present    13 pkcs11_softtoken_extra.so.1   yf_des_encrypt                 18 libmd_psr.so.1                yf_md5_multiblock              41 libmd_psr.so.1                yf_md5_instruction_present     72 libmd_psr.so.1                yf_sha1_instruction_present    82 libmd_psr.so.1                yf_sha1_multiblock             82 This indicates that both RSA and AES ops are done in Solaris Crypto Framework. 13.4 SAMPLE OUTPUT FOR CIPHER TLS_RSA_WITH_AES_256_CBC_SHA (0x0035) ON T4 SPARC SOLARIS 10 WITH PKCS#11 BYPASS # ./t4crypto.d -p 18225 pkcs11_softtoken_extra.so.1   soft_decrypt_rsa_pkcs_decode 1 pkcs11_softtoken_extra.so.1   soft_rsa_crypt_init_common   1 pkcs11_softtoken_extra.so.1   soft_rsa_decrypt             1 pkcs11_softtoken_extra.so.1   soft_rsa_decrypt_common      1 pkcs11_softtoken_extra.so.1   big_mp_mul_yf                2 pkcs11_softtoken_extra.so.1   mpm_yf_mpmul                 2 pkcs11_softtoken_extra.so.1   mpmul_arr_yf                 2 pkcs11_softtoken_extra.so.1   big_mont_mul_yf              6 pkcs11_softtoken_extra.so.1   mm_yf_montmul                6 pkcs11_softtoken_extra.so.1   yf_mpmul_present             8 For this cipher, when I enable PKCS#11 bypass, Only RSA probes are being hit AES probes are not being hit. 13.5 ustack() for RSA operations / probefunc == "soft_rsa_decrypt" / Shows that libnss3.so is calling C_* functions of libpkcs11.so which is calling functions of pkcs11_softtoken_extra.so for both cases with and without bypass. When PKCS#11 bypass is disabled (allow-bypass is 0) pkcs11_softtoken_extra.so.1`soft_rsa_decrypt pkcs11_softtoken_extra.so.1`soft_rsa_decrypt_common+0x94 pkcs11_softtoken_extra.so.1`soft_unwrapkey+0x258 pkcs11_softtoken_extra.so.1`C_UnwrapKey+0x1ec libpkcs11.so.1`meta_unwrap_key+0x17c libpkcs11.so.1`meta_UnwrapKey+0xc4 libpkcs11.so.1`C_UnwrapKey+0xfc libnss3.so`pk11_AnyUnwrapKey+0x6b8 libnss3.so`PK11_PubUnwrapSymKey+0x8c libssl3.so`ssl3_HandleRSAClientKeyExchange+0x1a0 libssl3.so`ssl3_HandleClientKeyExchange+0x154 libssl3.so`ssl3_HandleHandshakeMessage+0x440 libssl3.so`ssl3_HandleHandshake+0x11c libssl3.so`ssl3_HandleRecord+0x5e8 libssl3.so`ssl3_GatherCompleteHandshake+0x5c libssl3.so`ssl_GatherRecord1stHandshake+0x30 libssl3.so`ssl_Do1stHandshake+0xec libssl3.so`ssl_SecureRecv+0x1c8 libssl3.so`ssl_Recv+0x9c libns-httpd40.so`__1cNDaemonSessionDrun6M_v_+0x2dc When PKCS#11 bypass is enabled (allow-bypass is 1) pkcs11_softtoken_extra.so.1`soft_rsa_decrypt pkcs11_softtoken_extra.so.1`soft_rsa_decrypt_common+0x94 pkcs11_softtoken_extra.so.1`C_Decrypt+0x164 libpkcs11.so.1`meta_do_operation+0x27c libpkcs11.so.1`meta_Decrypt+0x4c libpkcs11.so.1`C_Decrypt+0xcc libnss3.so`PK11_PrivDecryptPKCS1+0x1ac libssl3.so`ssl3_HandleRSAClientKeyExchange+0xe4 libssl3.so`ssl3_HandleClientKeyExchange+0x154 libssl3.so`ssl3_HandleHandshakeMessage+0x440 libssl3.so`ssl3_HandleHandshake+0x11c libssl3.so`ssl3_HandleRecord+0x5e8 libssl3.so`ssl3_GatherCompleteHandshake+0x5c libssl3.so`ssl_GatherRecord1stHandshake+0x30 libssl3.so`ssl_Do1stHandshake+0xec libssl3.so`ssl_SecureRecv+0x1c8 libssl3.so`ssl_Recv+0x9c libns-httpd40.so`__1cNDaemonSessionDrun6M_v_+0x2dc libnsprwrap.so`ThreadMain+0x1c libnspr4.so`_pt_root+0xe8 13.6 ustack() FOR AES operations / probefunc == "yf_aes256_cbc_encrypt" / When PKCS#11 bypass is disabled (allow-bypass is 0) pkcs11_softtoken_extra.so.1`yf_aes256_cbc_encrypt pkcs11_softtoken_extra.so.1`aes_block_process_contiguous_whole_blocks+0xb4 pkcs11_softtoken_extra.so.1`aes_crypt_contiguous_blocks+0x1cc pkcs11_softtoken_extra.so.1`soft_aes_encrypt_common+0x22c pkcs11_softtoken_extra.so.1`C_EncryptUpdate+0x10c libpkcs11.so.1`meta_do_operation+0x1fc libpkcs11.so.1`meta_EncryptUpdate+0x4c libpkcs11.so.1`C_EncryptUpdate+0xcc libnss3.so`PK11_CipherOp+0x1a0 libssl3.so`ssl3_CompressMACEncryptRecord+0x264 libssl3.so`ssl3_SendRecord+0x300 libssl3.so`ssl3_FlushHandshake+0x54 libssl3.so`ssl3_SendFinished+0x1fc libssl3.so`ssl3_HandleFinished+0x314 libssl3.so`ssl3_HandleHandshakeMessage+0x4ac libssl3.so`ssl3_HandleHandshake+0x11c libssl3.so`ssl3_HandleRecord+0x5e8 libssl3.so`ssl3_GatherCompleteHandshake+0x5c libssl3.so`ssl_GatherRecord1stHandshake+0x30 libssl3.so`ssl_Do1stHandshake+0xec Shows that libnss3.so is calling C_* functions of libpkcs11.so which is calling functions of pkcs11_softtoken_extra.so However when PKCS#11 bypass is disabled (allow-bypass is 1) this stack isn't getting called. 14. LIST OF ALL THE PROBES MATCHED BY D SCRIPT FOR REFERENCE # ./t4crypto.d -p 18225 -l ID PROVIDER MODULE FUNCTION NAME ... 55720 pid18225 libmd_psr.so.1 yf_md5_instruction_present entry 55721 pid18225 libmd_psr.so.1 yf_sha256_instruction_present entry 55722 pid18225 libmd_psr.so.1 yf_sha512_instruction_present entry 55723 pid18225 libmd_psr.so.1 yf_sha1_instruction_present entry 55724 pid18225 libmd_psr.so.1 yf_sha256 entry 55725 pid18225 libmd_psr.so.1 yf_sha256_multiblock entry 55726 pid18225 libmd_psr.so.1 yf_sha512 entry 55727 pid18225 libmd_psr.so.1 yf_sha512_multiblock entry 55728 pid18225 libmd_psr.so.1 yf_sha1 entry 55729 pid18225 libmd_psr.so.1 yf_sha1_multiblock entry 55730 pid18225 libmd_psr.so.1 yf_md5 entry 55731 pid18225 libmd_psr.so.1 yf_md5_multiblock entry 55732 pid18225 pkcs11_softtoken_extra.so.1 yf_aes_instructions_present entry 55733 pid18225 pkcs11_softtoken_extra.so.1 rijndael_key_setup_enc_yf entry 55734 pid18225 pkcs11_softtoken_extra.so.1 yf_aes_expand128 entry 55735 pid18225 pkcs11_softtoken_extra.so.1 yf_aes_encrypt128 entry 55736 pid18225 pkcs11_softtoken_extra.so.1 yf_aes_decrypt128 entry 55737 pid18225 pkcs11_softtoken_extra.so.1 yf_aes_expand192 entry 55738 pid18225 pkcs11_softtoken_extra.so.1 yf_aes_encrypt192 entry 55739 pid18225 pkcs11_softtoken_extra.so.1 yf_aes_decrypt192 entry 55740 pid18225 pkcs11_softtoken_extra.so.1 yf_aes_expand256 entry 55741 pid18225 pkcs11_softtoken_extra.so.1 yf_aes_encrypt256 entry 55742 pid18225 pkcs11_softtoken_extra.so.1 yf_aes_decrypt256 entry 55743 pid18225 pkcs11_softtoken_extra.so.1 yf_aes128_load_keys_for_encrypt entry 55744 pid18225 pkcs11_softtoken_extra.so.1 yf_aes192_load_keys_for_encrypt entry 55745 pid18225 pkcs11_softtoken_extra.so.1 yf_aes256_load_keys_for_encrypt entry 55746 pid18225 pkcs11_softtoken_extra.so.1 yf_aes128_ecb_encrypt entry 55747 pid18225 pkcs11_softtoken_extra.so.1 yf_aes192_ecb_encrypt entry 55748 pid18225 pkcs11_softtoken_extra.so.1 yf_aes256_ecb_encrypt entry 55749 pid18225 pkcs11_softtoken_extra.so.1 yf_aes128_cbc_encrypt entry 55750 pid18225 pkcs11_softtoken_extra.so.1 yf_aes192_cbc_encrypt entry 55751 pid18225 pkcs11_softtoken_extra.so.1 yf_aes256_cbc_encrypt entry 55752 pid18225 pkcs11_softtoken_extra.so.1 yf_aes128_ctr_crypt entry 55753 pid18225 pkcs11_softtoken_extra.so.1 yf_aes192_ctr_crypt entry 55754 pid18225 pkcs11_softtoken_extra.so.1 yf_aes256_ctr_crypt entry 55755 pid18225 pkcs11_softtoken_extra.so.1 yf_aes128_cfb128_encrypt entry 55756 pid18225 pkcs11_softtoken_extra.so.1 yf_aes192_cfb128_encrypt entry 55757 pid18225 pkcs11_softtoken_extra.so.1 yf_aes256_cfb128_encrypt entry 55758 pid18225 pkcs11_softtoken_extra.so.1 yf_aes128_load_keys_for_decrypt entry 55759 pid18225 pkcs11_softtoken_extra.so.1 yf_aes192_load_keys_for_decrypt entry 55760 pid18225 pkcs11_softtoken_extra.so.1 yf_aes256_load_keys_for_decrypt entry 55761 pid18225 pkcs11_softtoken_extra.so.1 yf_aes128_ecb_decrypt entry 55762 pid18225 pkcs11_softtoken_extra.so.1 yf_aes192_ecb_decrypt entry 55763 pid18225 pkcs11_softtoken_extra.so.1 yf_aes256_ecb_decrypt entry 55764 pid18225 pkcs11_softtoken_extra.so.1 yf_aes128_cbc_decrypt entry 55765 pid18225 pkcs11_softtoken_extra.so.1 yf_aes192_cbc_decrypt entry 55766 pid18225 pkcs11_softtoken_extra.so.1 yf_aes256_cbc_decrypt entry 55767 pid18225 pkcs11_softtoken_extra.so.1 yf_aes128_cfb128_decrypt entry 55768 pid18225 pkcs11_softtoken_extra.so.1 yf_aes192_cfb128_decrypt entry 55769 pid18225 pkcs11_softtoken_extra.so.1 yf_aes256_cfb128_decrypt entry 55771 pid18225 pkcs11_softtoken_extra.so.1 yf_des_instructions_present entry 55772 pid18225 pkcs11_softtoken_extra.so.1 yf_des_expand entry 55773 pid18225 pkcs11_softtoken_extra.so.1 yf_des_encrypt entry 55774 pid18225 pkcs11_softtoken_extra.so.1 yf_mpmul_present entry 55775 pid18225 pkcs11_softtoken_extra.so.1 yf_montmul_present entry 55776 pid18225 pkcs11_softtoken_extra.so.1 mm_yf_montmul entry 55777 pid18225 pkcs11_softtoken_extra.so.1 mm_yf_montsqr entry 55778 pid18225 pkcs11_softtoken_extra.so.1 mm_yf_restore_func entry 55779 pid18225 pkcs11_softtoken_extra.so.1 mm_yf_ret_from_mont_func entry 55780 pid18225 pkcs11_softtoken_extra.so.1 mm_yf_execute_slp entry 55781 pid18225 pkcs11_softtoken_extra.so.1 big_modexp_ncp_yf entry 55782 pid18225 pkcs11_softtoken_extra.so.1 big_mont_mul_yf entry 55783 pid18225 pkcs11_softtoken_extra.so.1 mpmul_arr_yf entry 55784 pid18225 pkcs11_softtoken_extra.so.1 big_mp_mul_yf entry 55785 pid18225 pkcs11_softtoken_extra.so.1 mpm_yf_mpmul entry 55786 pid18225 libns-httpd40.so nsapi_rsa_set_priv_fn entry ... 55795 pid18225 libnss3.so prepare_rsa_priv_key_export_for_asn1 entry 55796 pid18225 libresolv.so.2 sunw_dst_rsaref_init entry 55797 pid18225 libnssutil3.so NSS_Get_SEC_UniversalStringTemplate entry ... 55813 pid18225 libsoftokn3.so prepare_low_rsa_priv_key_for_asn1 entry 55814 pid18225 libsoftokn3.so rsa_FormatOneBlock entry 55815 pid18225 libsoftokn3.so rsa_FormatBlock entry 55816 pid18225 libnssdbm3.so lg_prepare_low_rsa_priv_key_for_asn1 entry 55817 pid18225 libfreebl_32fpu_3.so rsa_build_from_primes entry 55818 pid18225 libfreebl_32fpu_3.so rsa_is_prime entry 55819 pid18225 libfreebl_32fpu_3.so rsa_get_primes_from_exponents entry 55820 pid18225 libfreebl_32fpu_3.so rsa_PrivateKeyOpNoCRT entry 55821 pid18225 libfreebl_32fpu_3.so rsa_PrivateKeyOpCRTNoCheck entry 55822 pid18225 libfreebl_32fpu_3.so rsa_PrivateKeyOpCRTCheckedPubKey entry 55823 pid18225 pkcs11_kernel.so.1 key_gen_rsa_by_value entry 55824 pid18225 pkcs11_kernel.so.1 get_rsa_private_key entry 55825 pid18225 pkcs11_kernel.so.1 get_rsa_public_key entry 55826 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_encrypt entry 55827 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_decrypt entry 55828 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_crypt_init_common entry 55829 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_encrypt_common entry 55830 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_decrypt_common entry 55831 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_sign_verify_init_common entry 55832 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_sign_common entry 55833 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_verify_common entry 55834 pid18225 pkcs11_softtoken_extra.so.1 generate_rsa_key entry 55835 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_genkey_pair entry 55836 pid18225 pkcs11_softtoken_extra.so.1 get_rsa_sha1_prefix entry 55837 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_digest_sign_common entry 55838 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_digest_verify_common entry 55839 pid18225 pkcs11_softtoken_extra.so.1 soft_rsa_verify_recover entry 55840 pid18225 pkcs11_softtoken_extra.so.1 rsa_pri_to_asn1 entry 55841 pid18225 pkcs11_softtoken_extra.so.1 asn1_to_rsa_pri entry 55842 pid18225 pkcs11_softtoken_extra.so.1 soft_encrypt_rsa_pkcs_encode entry 55843 pid18225 pkcs11_softtoken_extra.so.1 soft_decrypt_rsa_pkcs_decode entry 55844 pid18225 pkcs11_softtoken_extra.so.1 soft_sign_rsa_pkcs_encode entry 55845 pid18225 pkcs11_softtoken_extra.so.1 soft_verify_rsa_pkcs_decode entry 55770 profile tick-1sec

  Read the article

• SOA PARTNER COMMUNITY NEWSLETTER JULY 2012

  - by mseika

  SOA PARTNER COMMUNITY NEWSLETTER JULY 2012 Dear SOA partner community member To provide our community members the best of our knowledge, we want your feedback on our SOA Partner community. Thus we are organizing SOA Partner Community Survey 2012. We request you to participate in the survey and give your valuable feedback on various areas of marketing, sales and education. To continue our successful BPM Suite, Oracle is launching together with you Process Accelerators initiative. It’s your opportunity to co-develop and market predefined processes. Oracle Fusion Applications Design Patterns are a great tool to develop your SOA or BPM solution or process accelerators. To promote your SOA & BPM Specialization we continue to offer several benefits. This month we would like to highlight our Specialization Plaques - make sure you request one for your office! Our Fusion Middleware Summer Camps are booked out, if could not get a seat you can attend the SOA & BPM track @ Virtual Developer Day: Oracle Fusion Development Oracle demo systems offer´s two new demos: Business Driven Development based on BPM Suite & SOA Lifecycle Management. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Community SurveyProcess Accelerators KitPlaques SOA & BPM SpecializedSOA & BPM at Virtual Developer Day News from our Partners & CommunityOverview of SOA Diagnostics in 11.1.1.6 Business driven development(BDD) demo now available! SOA Lifecycle Management Oracle Fusion applications design patterns Updated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum COMMUNITY SURVEY Like every year we would like to get your feedback in our SOA Partner Community Survey 2012. Make sure that You attend to further develop our community and support our planning! It is key for us to get your feedback to prepare for the next fiscal year. Back to top PROCESS ACCELERATORS KIT Oracle is very interested to co-develop and market with you, our partners, pre-defined processes for BPM Suite.I am very happy to announce a new program called “Oracle BPM Partner Solution Catalog”. This program will provide a one-stop shop for our customers looking for Oracle BPM partner solutions available in the market today.The Oracle BPM Solution Catalog will be hosted on our very popular Oracle Technology Network (OTN). To give you an idea of the scale of customer visibility, OTN today receives over 1Million hits per day from our business and developer community. We would like to invite you to list your Oracle BPM 11g solutions available today.In order to participate in this program, you need to do the following: Fill in the attached slide templates - #3 and #4 for each Oracle BPM 11g solution you would like to list on OTN.Please add links to whitepapers , videos, references to the specific solution in the template slide. We recommend that you create a landing page on your website for these linked artifacts and just point to the same from within the PowerPoint template. This will give you the flexibility to update the information as frequently as needed. If you have the particular solution in production or a reference available, please list them as well. Send the PowerPoint template slides (1 set of slides for each Oracle BPM solution) to [email protected]. In addition to having the opportunity to list your solutions on OTN for Oracle customers, you will have the chance to advertise your new wins/implementations/solutions in an Oracle Sponsored PM Webinar held every quarter. This program is targeted to go live by the end of summer 2012. At this point, we are targeting a soft launch in July end 2012 so send on your BPM solutions information as soon as possible. We would love to have your solution(s) listed in the “Oracle BPM Partner Solution Catalog” at the time of the launch. This will be a live repository so you can keep adding more solutions as they become available. If you have any questions, please feel free to contact us [email protected], Product Strategy Director, Oracle BPM , Phone +1 650.506.5486.Thank you and look forward to hearing from you. Oracle BPM team Process Accelerators Overview.pdf ProcessAcceleratorsDataSheet.pdf Demos draUPK.zip & trmUPK.zip BPM Solution repository slides.ppt Additional BPM material BPM Process Development Lifecycle Document that describes recommended approach to collaborative process modeling across business and IT tools ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) by Andrejus Baranovskis BPMN process editor problems in 11.1.1.6 by Mark Nelson BPM – Disable DBMS job to refresh B2B Materialized View by Mark Nelson For the complete kit please visit the BPM folder at our SOA Community Workspace (SOA Community membership required). For the complete presentation please visit our SOA Community Workspace (SOA Community membership required). Information is Oracle and Partner confidential! Back to top PLAQUES SOA & BPM SPECIALIZED We continue to offer you a nice SOA & BPM Specialization plaque with your logo to proof your success. If you are a SOA or BPM Specialized partner and would like to request the plaque please send Brigitte an e-mail with the following information: Partner Name Partner logo (preferred eps file) Partner Status gold or platinum Your shipping address Your Specialization: SOA or BPM We recommend to mount the plaque at your office reception in addition you can use the SOA Specialization logos at your website download Logo: Gold & Platinum or the BPM logos Gold & Platinum Back to top SOA & BPM AT VIRTUAL DEVELOPER DAY Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staffOracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications.Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect - this event has something for everyone. Don’t miss this opportunity.Tuesday, July 10, 2012. 9:00 a.m. PT -1:00 p.m. PT 11:00 a.m. CT - 3:00 p.m. CT 12:00 p.m. ET - 4:00 p.m. ET 1:00 p.m. BRT - 5:00 p.m. BRT Register online now! for this FREE event. Agenda: 09:00 am Opening 09:30 am Keynote: Oracle Fusion Development Track1Introduction to Fusion Development Track2What's New in Fusion Development Track3Fusion Development in the Enterprise 10:00 am Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 am Rich Web UI made simple - an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration *Hands On Lab – WebCenter and ADF Lab w/ JDeveloper - Lab materials will be provided ahead of the event to give you ample time to work through the lab and increase the productivity of the live chat sessions the day of the event. Sessions abstractsRegister online now! for this FREE event Read more on Community Events and post your comment here. Back to top NEWS FROM OUR PARTNERS AND COMMUNITY Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity JDeveloper & ADF?Troubleshooting BPMN process editor problems in 11.1.1.6http://dlvr.it/1p0FfS SOA Community?SOA & BPM @ Virtual Developer Day: Oracle Fusion Development - July 10th 2012https://soacommunity.wordpress.com/2012/07/02/soa-bpm-virtual-developer-day- oracle-fusion-developmentjuly-10th-2012/#soacommunity #soa #bom #education orclateamsoa ?A-Team Blog #ateam: BAM design pointers - In working recently with a large Oracle customer on SOA and BAM, I discove.http://ow.ly/1kYqES SOA CommunitySOA Community Newsletter June 2012http://wp.me/p10C8u-qw SOA CommunityBPMN process editor problems in 11.1.1.6 by Mark Nelsonhttp://redstack.wordpress.com/2012/06/27/ bpmn-process-editor-problems-in-11-1-1-6 #soacommunity #bpm OTNArchBeat ?SOA Learning Library: free short, topic-focused training on Oracle SOA & BPM products | @SOACommunity http://pub.vitrue.com/NE1G Andrejus Baranovskis ?ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization)http://fb.me/1coX4r1X1 SOA CommunitySOA Learning Library provides a comprehensive curriculum for the SOA and BPM product suites https://soacommunity.wordpress.com/2012/06/27/soa-learning-library #soacommunity #soa #bpm OTNArchBeat ?A Universal JMX Client for Weblogic - Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koserhttp://pub.vitrue.com/mQVZ OTNArchBeat ?BPM - Disable DBMS job to refresh B2B Materialized View | Mark Nelson http://pub.vitrue.com/3PR0Oracle SOA ?Learn how Choice Hotels Implements Innovative Google Maps Solution with #OracleSOA http://bit.ly/MTwIJ3 SOA Communitytop Tweets SOA Partner Community - June 2012 Send your tweets @soacommunity #soacommunity https://soacommunity.wordpress.com/2012/06/25/top-tweets-soa-partner-community-june-2012 Torsten Winterberg#OPITZ is pushing Oracle commitment to the next level: New Specializations done: ADF, BPM, WLS, Exadatahttp://bit.ly/KX1WVS ServiceTechSymposium ?Only 8 more days left until Super Early Bird Registration Discount expires! http://www.servicetechsymposium.com OracleBlogsSOA Management in 3 minutes - Video explainerhttp://ow.ly/1kN5pn SOA Community ?SOA, Cloud & Service Technology Symposium 2012 London - Enter Promo Code: Djmxz370https://soacommunity.wordpress.com/2012/06/22/soa-cloud-service-technology-symposium-2012-london #soasymposium #soacommunity #soa Heidi BuelowGreat course! w David Read RT @soacommunity: product management ADF for BPM training 5 seats left https://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity SOA Community ?product management ADF for BPM training 5 seats lefthttps://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity OTNArchBeat ?Oacle Fusion Applications Design Patterns Now Available For Developers | Ultan O'Broinhttp://pub.vitrue.com/UEiF OTNArchBeat ?SOA, Cloud & Service Technology Symposium 2012London - Special Oracle Discounthttp://pub.vitrue.com/8E0J SOA CommunityBecome a facebook fan of soacommunity http://www.facebook.com/soacommunity #soacommunity SOA Community ?SOA Suite HealthCare Integration Architecture https://blogs.oracle.com/SOAForHealthcare/entry/soa_suite_healthcare_integration_architecture #soacommunity #soa Andrejus Baranovskis ?Running Pre-built Virtual Machine for SOA Suite and BPM Suite 11g PS5 on Mac OS X Snow Leopard (10.6http://fb.me/vB8nO0Vg OracleBlogsPrinciples of Service-Oriented Architecture by Douwe P. van den Bos http://ow.ly/1kIcOP OTNArchBeatOracle Public Cloud Architecture | @TylerJewell http://ow.ly/bHAcL The SOA Network ?Business Process Management, Service-Oriented Architecture, and Web 2.0: Business Transformation or.http://bit.ly/LBgREL #ITNews #SOA OracleBlogs ?Oracle SOA Foundation Practitioner Certificationhttp://ow.ly/1kGYYg Frank Nimphius ?Learn Advanced ADF. ORACLE Fusion Middleware Summer Camps in Lisbon - July 9th - 13thhttp://bit.ly/KGCl3i SOA CommunityTransform Your Application Integration with Best Practices from Oracle Customershttps://blogs.oracle.com/SOA/entry/transform_your_application_integration_with #soacommunity #soa #bpm Simone GeibWhat you always wanted to know about #oraclesoa diagnostics: Shawn Bailey, Overview of SOA Diagnostics in 11.1.1.6,http://ow.ly/bxK0M Oracle SOA ?Save the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to #oraclesoa http://bit.ly/LsNDGl OTNArchBeat ?New VirtualBox images for Oracle SOA Suite & Oracle BPM Suite 11.1.1.6.0http://ow.ly/bwDAl OracleBlogs ?Process development lifecycle in Oracle BPM 11g http://ow.ly/1ktesY Daniel AmadeiNew post: Oracle BPEL 11g Message Delivery & Recovery.http://amadei.com.br/blog/index.php /oracle-bpel-11g-message-delivery SOA Community ?Sending out the June edition of the #soacommunity newsletter - read it or become a member http://www.oracle.com/goto/emea/soa!#soa #bpm Arun Pareek ?For the past six months Ahmed Aboulnaga and me have been working on Oracle SOA Suite 11g Administrator's Handbook.http://lnkd.in/CAvpUQ SOA CommunitySun shine all day no clouds - solar eclipse is over... #sunshine #cloud http://www.infoq.com/presentations/Swarm-Computing Michel SchildmeijerWatch my blog Oracle Service Bus 11g: listing projects and services with WLST - part 1 http://lnkd.in/B7f3GQ @TITAN_GS @wlscommunity OTNArchBeatBook Review: Oracle Application Integration Architecture (AIA) Foundation Pack 11gR1: Essentials | Rajesh Rahejahttp://ow.ly/bn2cc OTNArchBeat ?Driving from Business Architecture to Business Process Services | @vghariharan http://ow.ly/bn5UB OTNArchBeat ?SOA Analysis within the Department of Defense Architecture Framework (DoDAF) 2.0 - Part II | Dawit Lessanu http://ow.ly/bn6sX Simone Geib ?Contact me directly for ideas how to improvehttp://bit.ly/advancedsoasuite and additional posts, presentations, white papers, ... #soasuite Simone Geib ?#soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite OracleBlogs ?June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA ServiceTechSymposium ?New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOeDebra Lilley ?looks good - real proof people are using the apps ! RT @fteter: Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps demed ?rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA CommunityMiddleware Oracle Excellence Awards 2012-HAPPY NEW YEAR! https://soacommunity.wordpress.com/2012/05/31/middleware-oracle-excellence-awards-2012happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle SOA CommunityHappy New Year #soacommunity thanks for the business! Time for a drink http://pic.twitter.com/zkK08KWB OTNArchBeat ?Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q SOA Communitytop Tweets SOA Partner Community &ndash; May 2012 http://wp.me/p10C8u-pP ServiceTechSymposiumNew session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com/agenda2012.php #elastic_soa_in_the_cloud orclateamsoa ?A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11Ghttp://ow.ly/1k2cnl ServiceTechSymposium ?New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Linkhttp://www.servicetechsymposium.com/agenda2012.php#soa_governance_at_edp SOA Community ?VirtualBox image SOA Suite & BPM Suite 11.1.1.6.0&ndash;Your feedback?http://wp.me/p10C8u-qh Oracle MiddlewareSave the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to#oraclesoa http://bit.ly/LU1y5N OTNArchBeat ?Goodbye, Silos. Hello SOA. | @stephanieoverbyhttp://pub.vitrue.com/NJJO SOA CommunityBPM Standard Edition - to start your BPM project http://wp.me/p10C8u-qj Please feel free to send us your news! And add your blog to our SOA blog wiki. Back to top OVERVIEW OF SOA DIAGNOSTICS IN 11.1.1.6 What tools are available for diagnosing SOA Suite issues? There are a variety of tools available to help you and Support diagnose SOA Suite issues in 11g but it can be confusing as to which tool is appropriate for a particular situation and what their relationships are. This blog post will introduce the various tools and attempt to clarify what each is for and how they are related. Let's first list the tools we'll be addressing: RDA: Remote Diagnostic Agent DFW: Diagnostic Framework Selective Tracing DMS: Dynamic Monitoring Service ODL: Oracle Diagnostic Logging ADR: Automatic Diagnostics Repository ADRCI: Automatic Diagnostics Repository Command Interpreter WLDF: WebLogic Diagnostic Framework This overview is not mean to be a comprehensive guide on using all of these tools, however, extensive reference materials are included that will provide many more details on their execution. Another point to note is that all of these tools are applicable for Fusion Middleware as a whole but specific products may or may not have implemented features to leverage them. A couple of the tools have a WebLogic Scripting Tool or 'WLST' interface. WLST is a command interface for executing pre-built functions and custom scripts against a domain. A detailed WLST tutorial is beyond the scope of this post but you can find general information here. There are more specific resources in the below sections.In this post when we refer to 'Enterprise Manager' or 'EM' we are referring to Enterprise Manager Fusion Middleware Control. read the full blog post here. Read more on Oracle and post your comment here. Back to top BUSINESS DRIVEN DEVELOPMENT (BDD) DEMO NOW AVAILABLE! For access to the Oracle demo systems please visit OPN and talk to your Partner Expert DSS is pleased to announce the availability of the demo “Business Driven Development“. This innovative demonstration uses a case-study approach to show business users how they can easily streamline their Business Processes - delivering greater efficiency, agility, visibility and collaboration with Oracle BPM and WebCenter. The BDD demonstration uses a case study-based approach to highlight a business problem at a fictional company, Avitek Corporation, and uses Oracle BPM and Oracle WebCenter to solve the business problem. This holistic approach has specifically been used to appeal to a non-technical business analyst user. This demo is NOT focused on product features, but aims to guide users through a complete BPM lifecycle. The scenario is based on improving a simple order process (scenario details are in the demo script). Avitek Corporation is sufferinng from a manual email-driven ordering process. Sales reps don’t know where the customer orders are stuck (no visibility) and finance users are unable to manually approve every order (no automation). There are several areas where this process can be improved with Business Process Management technology. This demo shows how improving following areas will ignificantly help resolve the business problems Avitek Corporation is facing. Areas for improvement include: Utilizing BPM for process management, rather than an unregulated, email-based process. Utilizing automated services, rather than requiring a human to key into a system. For example, Finance checking the customer’s credit rating is something that could be automated. Centralizing business rules that can be integrated into a business process, rather than requiring a human to process them. For example, Finance must determine when orders can be automatically approved. Provide insight and visibility into the process. For example, Sales Rep needs to know the status of their customer’s orders. The BDD Demo uses the following products. Oracle BPM Suite 11g PS4FP Oracle WebCenter 11g PS4FP (for Process Spaces) Oracle Business Activity Monitoring 11g Oracle Database 11g Back to top SOA LIFECYCLE MANAGEMENT For access to the Oracle demo systems please visit OPN and talk to your Partner Expert We are pleased to announce the availability of the SOA Management demo that showcases some of the key provisioning and lifecycle management capabilities of SOA Management Pack Enterprise Edition (EE). This demo specifically focuses on some of the lifecycle management solutions for Oracle SOA Suite and Oracle Service Bus (OSB). Demo Highlights The demo showcases the following capabilities. Provisioning of SOA Composites Provisioning of OSB Projects Provision SOA and OSB artifacts in a future maintenance window Back to top ORACLE FUSION APPLICATIONS DESIGN PATTERNS The Oracle Fusion Applications user experience design patterns are published! These new, reusable usability solutions and best-practices, which will join the Oracle dashboard patterns and guidelines that are already available online, are used by Oracle to artfully bring to life a new standard in the user experience, or UX, of enterprise applications. Now, the Oracle applications development community can benefit from the science behind the Oracle Fusion Applications user experience, too. These Oracle Fusion Applications UX Design Patterns, or blueprints, enable Oracle applications developers and system implementers everywhere to leverage professional usability insight when: tailoring an Oracle Fusion application, creating coexistence solutions that existing users will be delighted with, thus enabling graceful user transitions to Oracle Fusion Applications down the road, or designing exciting, new, highly usable applications in the cloud or on-premise. Based on the Oracle Application Development Framework (ADF) components, the Oracle Fusion Applications patterns and guidelines are proven with real users and in the Applications UX usability labs, so you can get right to work coding productivity-enhancing designs that provide an advantage for your entire business. What’s the best way to get started? We’ve made that easy, too. The Design Filter Tool (DeFT) selects the best pattern for your user type and task. Simply adapt your selection for your own task flow and content, and you’re on your way to a really great applications user experience. More Oracle applications design patterns and training are coming your way in the future. To provide feedback on the sets that are currently available, let me know in the comments! Read more on Fusionapps and post your comment here. Back to top UPDATED ORACLE MATERIAL Integrated SOA Gateway Documentation - Implementation Guide | Developer’s Guide Webcast Series: Oracle’s SOA and Oracle Business Process Management Solutions (Choice Hotels, Eaton, Farmers Insurance) BAM design pointers By Kavitha Srinivasan Seeking Oracle Fusion Middleware Go Live StoriesOracle Fusion Middleware product management is looking for recent go live stories to share with the Oracle sales team, sales consulting, product management and other internal groups. Customer contact details may remain anonymous. Your successful implementation will be featured in a quarterly report. The chance to present on an internal webcast is also available. Contact Maria Forney ([email protected]) if you have a noteworthy implementation success story. This is a good opportunity for partners interested in showcasing Oracle Fusion Middleware implementations, and gaining more exposure within Oracle. Performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources Back to top HAVE YOU MISSED OUR LAST SOA PARTNER COMMUNITY WEBCASTS? UPK Webcast Business Driven Application Management & BPM11g & Application Grid & GoldenGate & Fusion Middleware Pricing & OC4J to WebLogic & Next Generation SOA & Fusion Middleware in Utility & Fusion Middleware in Communications & Fusion Middleware in Public Services & Fusion Middleware in Financial Services Please check your local OPN trainings calendar for additional training dates and locations. Back to top SOA PARTNER COMMUNITY CALENDAR On-Demand Trainings Event Name Language Type SOA Virtual Developers Day English Tech In-Class Trainings Date Event name Location / Country Contact person Type 09-13.07.2012 BPM Suite 11g advanced training by David Read Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 ADF 11g advanced training by Grant Ronald and Frank Nimphius Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Lisbon, Portugal Jürgen Kress Tech 10.07.2012 Fusion Middleware Virtual Developer Day Online OTN Tech 10- 12.07.2012 WebLogic 12c training by Cosmin Tudor Lisbon, Portugal Jürgen Kress Tech 16-18.07.2012 SOA Suite 11g advanced training by Niall Commiskey Munich, Germany Jürgen Kress Tech 16-18.07.2012 ADF for BPM Suite 11g advanced training by David Read Munich, Germany Jürgen Kress Tech 16-18.07.2012 WebCenter Sites 11g advanced training by Product Management Munich, Germany Jürgen Kress Tech 17-20.07.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 23-26.07.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 29-31.08.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 02-05.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 28-30.11.2012 Oracle AIA 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 11-14.12.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 20-22.2.2013 Oracle AIA 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 14-17.1.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.3.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech Please check your local OPN Training Calendar for additional training and locations here. Back to top SOASCHOOL.COM - SOA CERTIFIED PROFESSIONAL(SOACP) PROGRAM The SOASchool.com - SOA Certified Professional (SOACP) program is dedicated to excellence in the field of SOA and service-oriented computing. Through a series of seasoned course modules and exams, IT professionals have the opportunity to obtain a number of different certifications to recognize their accomplishment of gaining "project ready" SOA proficiency. This comprehensive and strictly vendor-neutral program was developed in cooperation with best-selling SOA author Thomas Erl and several major SOA organizations and academic institutions. Through the involvement of the SOA Education Committee, course contents and certification requirements are constantly reviewed and revised to stay current with developments in the service-oriented computing industry. The program is currently comprised of 12 course modules and 5 certifications and is expanding to 18 course modules and 8 certifications throughout 2009. For more information, visit www.soaschool.com and www.soacp.com. Blog Twitter LinkedIn Mix Forum Wiki Back to top YOUR CONTENT ON THE NEWSLETTER AND ON THE SOA COMMUNITY PORTAL Publishing Your StoriesWe would like to invite our partners to publish information in the newsletter or on our SOA Community portal. Especially we are looking for your real life experience with our SOA technology. Please send your documents to Jürgen Kress. We look forward to getting your suggestions! Back to top SOA DISCUSSION FORUM BECOMES INTERACTIVE AT THE SOA COMMUNITY! Do you want to chat to experts, including partners and Oracle SOA Product Development? Do you want to get the latest information about our SOA solutions and events?Attend our private online SOA Discussion Forum at OTN. Please send your OTN forums user name to Brigitte Felisaz. You must be a registered user to access the SOA Discussion Forum. Back to top INVITE YOUR COLLEAGUES TO JOIN THE SOA COMMUNITY Please feel free to invite your colleagues to join the SOA Community and to participate in the SOA Assessment tests. For registration please login the Oracle PartnerNetwork and go to: www.oracle.com/goto/emea/soa For any questions on the above or concerning SOA and Oracle in general please contact the Oracle EMEA Alliances & Channels SOA Team. Best regardsOracle EMEA SOA TeamJürgen Kress Jürgen KressSOA Partner Adoption EMEATel. +49 89 1430 1479E-Mail: [email protected]

  Read the article

• Active Directory and Apple's Workgroup Manager

  - by qbn

  I thought I'd share my experiences here. I work for a small business with only ~20 users. I wanted the ability to use managed client preferences to assign things like the software update server. Basically the ability to manage my Macs easily and in a native way. At first I tried the magic triangle solution, but I found this to be very complicated. Not only does it require a Mac OS X Server, but it gives you two points of failure. Additionally each Mac workstation must be bound to both servers. Eventually I sucked it up and went with the schema changes documented here. I was hesitant at first, because the instructions require a lot of manual work. However it was fairly basic and only took me about an hour and a half. Below you'll find the schema changes file that was a result of my work. I followed the instructions exactly and double checked everything, after six months of having this in place things have been running great. Too good to not share. I hope I save someone a couple of hours. # ================================================================== # # This file should be imported with the following command: # ldifde -i -u -f Apple AD Schema Changes.ldf -s server:port -b username domain password -j . -c "cn=Configuration,dc=X" #configurationNamingContext # LDIFDE.EXE from AD/AM V1.0 or above must be used. # This LDIF file should be imported into AD or AD/AM. It may not work for other directories. # # ================================================================== # ================================================================== # Attributes # ================================================================== # Attribute: apple-category dn: cn=apple-category,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.10.4 ldapDisplayName: apple-category attributeSyntax: 2.5.5.12 adminDescription: Category for the computer or neighborhood oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computeralias dn: cn=apple-computeralias,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.3 ldapDisplayName: apple-computeralias attributeSyntax: 2.5.5.12 adminDescription: XML plist referring to a computer record oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computer-list-groups dn: cn=apple-computer-list-groups,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.11.4 ldapDisplayName: apple-computer-list-groups attributeSyntax: 2.5.5.12 adminDescription: groups oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computers dn: cn=apple-computers,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.11.3 ldapDisplayName: apple-computers attributeSyntax: 2.5.5.12 adminDescription: computers oMSyntax: 64 systemOnly: FALSE # Attribute: apple-data-stamp dn: cn=apple-data-stamp,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.12.2 ldapDisplayName: apple-data-stamp attributeSyntax: 2.5.5.5 adminDescription: data stamp oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-dns-domain dn: cn=apple-dns-domain,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.18.1 ldapDisplayName: apple-dns-domain attributeSyntax: 2.5.5.12 adminDescription: DNS domain oMSyntax: 64 systemOnly: FALSE # Attribute: apple-dnsname dn: cn=apple-dnsname,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.4 ldapDisplayName: apple-dnsname attributeSyntax: 2.5.5.12 adminDescription: DNS name oMSyntax: 64 systemOnly: FALSE # Attribute: apple-dns-nameserver dn: cn=apple-dns-nameserver,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.18.2 ldapDisplayName: apple-dns-nameserver attributeSyntax: 2.5.5.12 adminDescription: DNS name server list oMSyntax: 64 systemOnly: FALSE # Attribute: apple-group-homeowner dn: cn=apple-group-homeowner,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.14.2 ldapDisplayName: apple-group-homeowner attributeSyntax: 2.5.5.5 adminDescription: group home owner settings oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-group-homeurl dn: cn=apple-group-homeurl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.14.1 ldapDisplayName: apple-group-homeurl attributeSyntax: 2.5.5.5 adminDescription: group home url oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-imhandle dn: cn=apple-imhandle,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.21 ldapDisplayName: apple-imhandle attributeSyntax: 2.5.5.12 adminDescription: IM handle (service:account name) oMSyntax: 64 systemOnly: FALSE # Attribute: apple-keyword dn: cn=apple-keyword,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.19 ldapDisplayName: apple-keyword attributeSyntax: 2.5.5.12 adminDescription: keywords oMSyntax: 64 systemOnly: FALSE # Attribute: apple-mcxflags dn: cn=apple-mcxflags,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.10 ldapDisplayName: apple-mcxflags attributeSyntax: 2.5.5.12 adminDescription: mcx flags oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-mcxsettings dn: cn=apple-mcxsettings,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.16 ldapDisplayName: apple-mcxsettings attributeSyntax: 2.5.5.12 adminDescription: mcx settings oMSyntax: 64 systemOnly: FALSE # Attribute: apple-neighborhoodalias dn: cn=apple-neighborhoodalias,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.2 ldapDisplayName: apple-neighborhoodalias attributeSyntax: 2.5.5.12 adminDescription: XML plist referring to another neighborhood record oMSyntax: 64 systemOnly: FALSE # Attribute: apple-networkview dn: cn=apple-networkview,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.10.3 ldapDisplayName: apple-networkview attributeSyntax: 2.5.5.12 adminDescription: Network view for the computer oMSyntax: 64 systemOnly: FALSE # Attribute: apple-nodepathxml dn: cn=apple-nodepathxml,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.1 ldapDisplayName: apple-nodepathxml attributeSyntax: 2.5.5.12 adminDescription: XML plist of directory node path oMSyntax: 64 systemOnly: FALSE # Attribute: apple-service-location dn: cn=apple-service-location,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.5 ldapDisplayName: apple-service-location attributeSyntax: 2.5.5.12 adminDescription: Service location oMSyntax: 64 systemOnly: FALSE # Attribute: apple-service-port dn: cn=apple-service-port,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.3 ldapDisplayName: apple-service-port attributeSyntax: 2.5.5.9 adminDescription: Service port number oMSyntax: 2 systemOnly: FALSE # Attribute: apple-service-type dn: cn=apple-service-type,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.1 ldapDisplayName: apple-service-type attributeSyntax: 2.5.5.5 adminDescription: type of service oMSyntax: 22 systemOnly: FALSE # Attribute: apple-service-url dn: cn=apple-service-url,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.2 ldapDisplayName: apple-service-url attributeSyntax: 2.5.5.5 adminDescription: URL of service oMSyntax: 22 systemOnly: FALSE # Attribute: apple-user-authenticationhint dn: cn=apple-user-authenticationhint,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.15 ldapDisplayName: apple-user-authenticationhint attributeSyntax: 2.5.5.12 adminDescription: password hint oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-class dn: cn=apple-user-class,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.7 ldapDisplayName: apple-user-class attributeSyntax: 2.5.5.5 adminDescription: user class oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homequota dn: cn=apple-user-homequota,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.8 ldapDisplayName: apple-user-homequota attributeSyntax: 2.5.5.5 adminDescription: home directory quota oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homesoftquota dn: cn=apple-user-homesoftquota,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.17 ldapDisplayName: apple-user-homesoftquota attributeSyntax: 2.5.5.5 adminDescription: home directory soft quota oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homeurl dn: cn=apple-user-homeurl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.6 ldapDisplayName: apple-user-homeurl attributeSyntax: 2.5.5.5 adminDescription: home directory URL oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-mailattribute dn: cn=apple-user-mailattribute,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.9 ldapDisplayName: apple-user-mailattribute attributeSyntax: 2.5.5.12 adminDescription: mail attribute oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-picture dn: cn=apple-user-picture,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.12 ldapDisplayName: apple-user-picture attributeSyntax: 2.5.5.12 adminDescription: picture oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-printattribute dn: cn=apple-user-printattribute,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.13 ldapDisplayName: apple-user-printattribute attributeSyntax: 2.5.5.12 adminDescription: print attribute oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-webloguri dn: cn=apple-webloguri,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.22 ldapDisplayName: apple-webloguri attributeSyntax: 2.5.5.12 adminDescription: Weblog URI oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-xmlplist dn: cn=apple-xmlplist,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.17.1 ldapDisplayName: apple-xmlplist attributeSyntax: 2.5.5.12 adminDescription: XML plist data oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: ipHostNumber dn: cn=ipHostNumber,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.1.1.1.19 ldapDisplayName: ipHostNumber attributeSyntax: 2.5.5.5 adminDescription: IP address oMSyntax: 22 systemOnly: FALSE rangeUpper: 128 # Attribute: macAddress dn: cn=macAddress,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.1.1.1.22 ldapDisplayName: macAddress attributeSyntax: 2.5.5.5 adminDescription: MAC address oMSyntax: 22 systemOnly: FALSE rangeUpper: 128 # Attribute: mountDirectory dn: cn=apple-mountDirectory,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.1 ldapDisplayName: mountDirectory attributeSyntax: 2.5.5.12 adminDescription: mount path oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountDumpFrequency dn: cn=apple-mountDumpFrequency,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.4 ldapDisplayName: mountDumpFrequency attributeSyntax: 2.5.5.5 adminDescription: mount dump frequency oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountOption dn: cn=apple-mountOption,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.3 ldapDisplayName: mountOption attributeSyntax: 2.5.5.5 adminDescription: mount options oMSyntax: 22 systemOnly: FALSE # Attribute: mountPassNo dn: cn=apple-mountPassNo,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.5 ldapDisplayName: mountPassNo attributeSyntax: 2.5.5.5 adminDescription: mount passno oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountType dn: cn=apple-mountType,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.2 ldapDisplayName: mountType attributeSyntax: 2.5.5.5 adminDescription: mount VFS type oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: ttl dn: cn=ttl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.250.1.60 ldapDisplayName: ttl attributeSyntax: 2.5.5.9 oMSyntax: 2 isSingleValued: TRUE systemOnly: FALSE dn: changetype: modify add: schemaUpdateNow schemaUpdateNow: 1 - # ================================================================== # Classes # ================================================================== # Class: apple-computer dn: cn=apple-computer,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.10 ldapDisplayName: apple-computer adminDescription: computer objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-category mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.4 # mayContain: apple-computer-list-groups mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.4 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-networkview mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.3 # mayContain: apple-service-url mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.2 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: macAddress mayContain: 1.3.6.1.1.1.1.22 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 # Class: apple-computer-list dn: cn=apple-computer-list,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.11 ldapDisplayName: apple-computer-list adminDescription: computer list objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-computer-list-groups mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.4 # mayContain: apple-computers mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.3 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-configuration dn: cn=apple-configuration,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.12 ldapDisplayName: apple-configuration adminDescription: configuration objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-data-stamp mayContain: 1.3.6.1.4.1.63.1000.1.1.1.12.2 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-group dn: cn=apple-group,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.14 ldapDisplayName: apple-group adminDescription: group account objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-group-homeowner mayContain: 1.3.6.1.4.1.63.1000.1.1.1.14.2 # mayContain: apple-group-homeurl mayContain: 1.3.6.1.4.1.63.1000.1.1.1.14.1 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-user-picture mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.12 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 # Class: apple-location dn: cn=apple-location,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.18 ldapDisplayName: apple-location objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-dns-domain mayContain: 1.3.6.1.4.1.63.1000.1.1.1.18.1 # mayContain: apple-dns-nameserver mayContain: 1.3.6.1.4.1.63.1000.1.1.1.18.2 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-neighborhood dn: cn=apple-neighborhood,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.20 ldapDisplayName: apple-neighborhood objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-category mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.4 # mayContain: apple-computeralias mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.3 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-neighborhoodalias mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.2 # mayContain: apple-nodepathxml mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.1 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 possSuperiors: 2.5.6.5 possSuperiors: container # Class: apple-serverassistant-config dn: cn=apple-serverassistant-config,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.17 ldapDisplayName: apple-serverassistant-config objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-service dn: cn=apple-service,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.19 ldapDisplayName: apple-service objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mustContain: apple-service-type mustContain: 1.3.6.1.4.1.63.1000.1.1.1.19.1 # mayContain: apple-dnsname mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.4 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-service-location mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.5 # mayContain: apple-service-port mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.3 # mayContain: apple-service-url mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.2 # mayContain: ipHostNumber mayContain: 1.3.6.1.1.1.1.19 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-user dn: cn=apple-user,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.1 ldapDisplayName: apple-user adminDescription: apple user account objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-imhandle mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.21 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-user-authenticationhint mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.15 # mayContain: apple-user-class mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.7 # mayContain: apple-user-homequota mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.8 # mayContain: apple-user-homesoftquota mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.17 # mayContain: apple-user-homeurl mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.6 # mayContain: apple-user-mailattribute mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.9 # mayContain: apple-user-picture mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.12 # mayContain: apple-user-printattribute mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.13 # mayContain: apple-webloguri mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.22 # Class: mount dn: cn=apple-mount,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.8 ldapDisplayName: mount objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: mountDirectory mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.1 # mayContain: mountDumpFrequency mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.4 # mayContain: mountOption mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.3 # mayContain: mountPassNo mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.5 # mayContain: mountType mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.2 possSuperiors: 2.5.6.5 possSuperiors: container dn: changetype: modify add: schemaUpdateNow schemaUpdateNow: 1 - # ================================================================== # Updating present elements # ================================================================== # Add the new class to the user object dn: CN=User,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-user - # Add the new class to the computer object dn: CN=Computer,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-computer - # Add the new class to the group object dn: CN=Group,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-group - # Add the new class to the configuration object dn: CN=Configuration,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-configuration -

  Read the article

< Previous Page | 25 26 27 28 29 30  | Next Page >