Search Results

Search found 2441 results on 98 pages for 'vmware vdr'.

Page 29/98 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Using VMware Guest OS to enable Host OS to ssh to remote network

  - by Reuben L.

  Basically I have an issue because my host OS is 64-bit Linux Mint (Ubuntu derived) and it doesn't seem to be compatible with the Juniper Network Connect that is used by the network at my workplace. Thus, I am unable to ssh from terminal to the network. I can't make changes to the workplace network either so that leaves me with looking for solutions on my end. The main reason for me to access the network from home is to check on my running processes or to issue more commands to a few workstations. Putty is the desperate choice I usually make but it means I have to reboot to Windows and also have limited control. I've tried several other methods and they have all failed. Recently, I setup a VM with Windows 7 as the guest OS. Now half my problems are fixed as I don't have to physically reboot the system - I just have to engage Juniper Network Connect on the VM. However, I would still like to use my Linux terminal to ssh to the network. It sounds plausible that I could somehow manipulate ports to connect to the remote network from the host OS tunneled through the guest OS, but I really have no clue how to do so... Can anyone help?

  Read the article

• Vmware cpu allocation for a spiking database server

  - by user1552172

  I have a database server with many poorly written queries that causes the sql server to spike then drop constantly ( a massive start from scratch is happening). I need to know if the cpu allocation on the vm to expand as needed is best practice for a case like this. I am wondering if the esxi platform cant expand as fast as the spikes happen. I am curious what is best practice for vm cpu allocation on sql server (with horribly written queries)

  Read the article

• ESXi 5 VM Putty session hangs, vSphere client timing out

  - by user192702

  First of all I believe this is a ESXi issue but let me know if you have seen this. It started about a year ago when I noticed occasionally when I putty via SSH to my VM guests, if I do anything that makes it to display a lot of things at once, the session will hang and I have to start a new one quite often only to find the same behaviour. What I meant by display a lot of things can be any of the following: 1) tail -f filename 2) Paste a long command 3) less filename If I type in one character at a time this won't happen. I tried searching online and it always point me to flow control settings and the various suggestions I've tried have never been able to resolve the issue. Since last week, I've noticed I'm not able to connect to my POP3 server from Outlook (it's timing out from Outlook's perspective). Today I tried to connect to the ESXi via vSphere client and it gives me a time out also. Exact behavior and error I saw is similar to the one posted at the following URL but the suggested technique also failed to resolve the issue. http://davidcocke.blogspot.hk/2012/02/unable-to-login-with-vsphere-client.html Has anyone experienced this before? Any suggestions on how to troubleshoot this?

  Read the article

• VMWare ESX installation on sata disk

  - by ilansch

  I have a PC with Gigabyte H77 motherboard with Intel I5-3550 CPU 8 GB RAM 1600MHz and a 500GB Harddisk (7200RPM) - WD Sata III disk I wish to install esx on it and run some virtual machines on it. not alot, something like 2-3 VMs. My hardisk is Sata, is it possible to install ESX Server on it ? I am not worried about loading issues. When i try loading the installation it writes it cannot detect my disk (since its not SCSI disk). How can i bypass this ? or find a solution. thanks

  Read the article

• Automation Question using VMWare Workstation

  - by James K

  I'm running an experiment that requires me to create 100 instances of Windows XP w/SP3 and saving each VM instance off to a hard drive. I have to annotate the time that the VM load starts (starting my timer when I see the "Setup is preparing...") until the load ends when I see the final desktop after VM loads its drivers. I also have to annotate the host start and stop time. Is there any way this process can be automated? Each load runs me about 16:00 minutes and gets real tiresome after a time. BTW... Exact timing is not necessary, eyeballing as described above is sufficient for my testing needs.

  Read the article

• VMware 1.0.1 Windows7 - Ubuntu hostnames

  - by Kyle K

  I'm trying to run Ubuntu as the guest OS using VMWware 1.0.10 with Windows 7 Ultimate as the host OS. I had this set up previously with Win XP as the host OS and in fact I'm using the same .vmx My problem is I can't get either Win7 or Ubuntu to be able to ping the other by hostname. After installing Samba and Winbind on Ubuntu, I was able to get this working when under WinXP, but for some reason I can't get it to work under Win7. I can ping by IP Address, and the guest OS even shows up by hostname under the Windows networking panel (but of course I can't do anything with it), but pinging using short hostnames just won't work. Also, Win7 firewall is turned off completely.

  Read the article

• vSphere - datastore falling off a host

  - by Chadddada

  Recently we have been running the vCheck powershell script daily in order to help in monitoring our vSphere ESX 4.0 environment. One of the oddities that we have been seeing is that some of the datastores on the SAN don't always show up on every host. Our hosts are connected redundantly, via FC, to some brocade FC switches, which then connect via fiber to our EMC Ax4 SAN. While all the datastores are presented to each host we have, and they see them initially, they sometimes seem to fall off and are no longer visible. It easy enough to rescan for datastores and add them back to the hosts the hosts but this seems to be an error. Has anyone else seen this or know why it may be happening? Responses to questions: 1. Is it always the same ESX servers that lose their connection? – Scott Warren No this happens randomly on random hosts. If a VM is running on a particular host, of which the VM's disks are on a SAN datastore, then that datastore won't disappear. It seems to happen if a host doesn't touch a datastore for a bit and it just forgets about it.

  Read the article

• How can I shut down all my Virtual Machines when my UPS kicks in?

  - by Tim

  I have a Dell T610 running ESXi4, an APC Smart UPS 1000VA and a local "console" machine running Vista and the vSphere 4 Essentials pack. A dedicated management network is in place between the T610 and the Vista machine. We have 4 VMs: SBS 2003, Server 2003 running Terminal Services, and two XP Machines. Ideally, when the UPS is forced to use battery power [for a set number minutes], I would like to gracefully shutdown all the VMs, then the ESXi, then the console machine. The latter two are not strictly a priority, but the VMs within ESXi are. Google provided lots of deprecated scripts that used to work on ESXi 3.x or similar, however I am unable to find what they were deprecated by. What do I need to be able to do this? I have Powerchute Express as supplied with the UPS, but would be willing to pay for software if required.

  Read the article

• Adding subnet to a vsphere with single vcenter and esxi host

  - by Ilya Rakhlin

  Let me start of by saying that I do not specialize in networking, I am in the process of adding additional VMs to a testing environment and wanted some recommendations. In this case I am running a single ESXI 5.1 host and a single Vcenter management server. The problem is, I need another range of IP addresses added to the existing setup; hopefully without reconfiguring everything. Currently the esxi host is configured to IP: 192.168.100.200, gateway: 192.168.100.1 and subnet: 255.255.255.0. All of the VMs are running some version of linux with hard coded IP addresses in that range, and using that subnet. The VMs I am about to deploy I want to be on the 192.168.101.X network. Is it possible to add an additional subnet to this existing system that will also communicate with the current subnet? The esxi host has 6 physical NICs but only one connected as it is only a testing system; not sure if that matters. Are there any other ways to accomplish this hopefully without restarting or at least reconfiguring the IP addresses for each VM? Reason: Due to the configuration of the VMs to run the applications that we need I am using a large amount of the current IPs in the potential range (mostly VIPs). I will be setting up a new version of this “environment” while keeping the old one, thus potentially running out of IP addresses.

  Read the article

• Is there a faster way to deploy an OVA template?

  - by Luke

  I need to deploy vSphere Server Appliance 5.1. I have vSphere Client running locally and my internet upload is capped at 3 Mbps. It says it's going to take about 200 minutes to upload. When selecting a URL as opposed to a local file, does vSphere Client download it locally and then upload, or does it download the OVA directly to the server? My goal is to avoid waiting 3 1/2 hours for this to upload. If specifying a URL isn't any faster, are there any other methods that would allow me to deploy from the datacenter instead of my office? We don't have any Windows VM's installed on our cluster. So unfortunately I don't have a Windows machine with faster upload speed.

  Read the article

• ESXi5 - management services crashes - vms running

  - by Frederik Nielsen

  I have a setup with two ESXi5 servers. We are(were) running with a ISCSi box to server disk for the VM's - however we are in the progress of migrating away from it, because the storage os disk is bad. Now, one of the ESXi hosts has been running for ~20hrs, and it seems like the management services just crashed on that host.. The vms are still running - so it's not really serious. However, I want to fix it. Should I be worried? Will the VM's keep running? The hosts does respond on pings. I am running a vcenter to administrate the hosts. Thanks in advance.

  Read the article

• ESXi settings lost following reboot

  - by Araz

  Hi All, I have freshly installed ESXI 4. But when ever i reboot my server all the setting gets lost like IP setting move back to automatic instead of static, the license key gets lost. Any ideas?

  Read the article

• migrating storage to a different controller

  - by bellocarico

  Hello, I've just purcheased a couple of adaptec controller (2405/5405) for my ESXi 4.0 U1 servers. Currently ESXi and a couple of VMs are hosted on single sata boot disk connected to a nvidia on board non-RAID controller. I know that it's possible to migrate from single disk to RAID 1 with adaptec and I'm pleased with that, but I'm not sure if ESXi has already the right drivers installed/loaded for this controller. Is there any way I can check this? Is ESXi clever enough to recognize the new hardware and load the right module? Thanks

  Read the article

• Shrinking physical volumes in LVM on a Linux Guest in ESXi 5.0

  - by Stew

  The problem: Linux guest (OpenSuse 12.1), with multiple virtual disks attached. 3 disks are in a logical volume, two of which are exactly 2TB. None of the disks are independent, and due to the backup software we use, cannot be independent. When the two 2TB virtual disks are "dependent", the snapshot fails stating that the file is too large for the datastore. When I put those two disks in independent mode, snapshots work fine (the other disk is 1.8TB). I have therefore concluded that even shrinking the two physical disks by 100GB should solve the problem, however I am having trouble conceptualizing how to go about getting those disks smaller without breaking the LVM entirely. The actual LV has 1.3TB free, so there is plenty of space to shrink with. What I need to accomplish: Deallocate 100GB from the two, 2TB virtual disks within the linux guest. Shrink the two virtual disks by 100GB within vsphere (not as complicated). Are there any vsphere/LVM gurus that can give me a clue?

  Read the article

• Sending eMails in a external subnet in vmware ESXi

  - by user80658

  This might be a bit hard for me to explain - and it is a pretty individual situation. I got a native server at Hetzner (www.hetzner.de). The public IP is 88.[...].12. I got ESXi running on this server. I can access the esxi console by the public ip, but none of the virtual machines. That's why I bought a public subnet with 8 (6 usable) IPs (46.[...]) and an additional public ip (88.[...].26). This additional public ip belongs to the first virtual maschine - a firewall appliance - which is connected to the WAN. This need to be done this way - since it is the official way by hetzner. My 46. subnet is behind the firewall. I got a virtualmin server with dovecot imap/pop3 server. When sending a email, most provider (gmail) will accept those mails, but a lot will put it into spam (aol). My theory is: The MX line of my domain says of course the ip of the virtual machine (46.[...]), but in the raw email it says that email is sent by the ip of the firewall (88.[...].26), which doesnt sound trustworthy. A solution would be if the firewall could handle mail, but it simply cant. How can I prevent this problem? Thanks.

  Read the article

• How can I automate restarting a vmware vm

  - by Stu

  I have a vm that does nothing but run magic jack. Magic jack doesn't run perfectly in a vm. It works great for days then randomly the vm reboots. except it doesn't come up clean. It gets to the windows splash screen and hangs spinning the cpu. I don't care how I solve the problem (although not crashing in the first place would be ideal) but I just need the vm to reboot cleanly when it does crash. Is there a windows registry setting I can say "on crash, reboot" or something like that?

  Read the article

• Changing time intervals for vSphere performance monitoring, and is there a better way?

  - by user991710

  I have a set of experiments running on a cluster node which is running ESXi 5.1, and I want to monitor the resource consumption on the node itself. Specifically, I am currently running experiments on a subset of the VMs on the ESXi host and wish to monitor resource consumption on those specific VMs. Right now, since I'm using only a single ESXi host, I am using vSphere to access it and the performance reports. Ideally, I would like to get these reports for different time intervals. I can already get the charts for a time interval of 1h, but these are rather long-running experiments and something like 2h, 3h,... would be preferable. However, I cannot seem to change the time interval. Here is an example of what my Customize Performance Chart dialog shows: I am also running on a trial key at the moment. How can I change this interval? Do I need a standard license, or do I just need to turn off the VM (unlikely, but I haven't attempted it yet as these are long-running experiments)? Any help (or pointers to documentation which deals with the above -- I've already looked but did not find much) would be greatly appreciated.

  Read the article

• Benefits to private networks between virtual machines on an ESXi host?

  - by arex1337

  I'm planning this development environment with a few database servers, and originally thought I would have a few private networks. I then thought it might be unnecessary as the ESXi cluster already provides redundancy with 4 NICs (in my case) and should manage the network traffic pretty intelligently, right? Two private networks Zero private networks What are the advantages/disadvantages between the two shown configurations - on an ESXi 4.1 host?

  Read the article

• recommendation for configuration for a multi-core guestOS

  - by reidLinden

  Hi there, I've just received an upgraded Host machine, and am looking to push some of those advances to my workstations Guest OS(s). In particular, I used to have a single processor, with 2 cores, so my guestOS only had 1/1. Now, I've got a single processor with 8 cores, so I'm curious about what would be recommended for my GuestOS now? 1 processor/4 cores? 2 processors/2Cores? 4 processors/1 core? My instinct says to stick with the number of physical processors (or less), but, is that based on reality? I spent a good while looking for an answer to this, but perhaps my google-karma isn't in my favor today. Suggestions?

  Read the article

• Window 7 image in vmware will allow network connection out but not http

  - by Ormis

  I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I initially asked this on stackoverflow and now my eyes are now opened up to superuser. Thank you for any help you can provide.

  Read the article

• VMWare capacity planner and monitoring network packets/second

  - by j t

  My client requested that we provide him 'packets/second' statistics for all servers monitored using Capacity Planner. Does anybody knows if it is possible and how to do that? I can get the bytes/second without trouble but not the packets.

  Read the article

• Ubuntu 9.10 as VMWare guest OS, X won't start

  - by vava

  I have Ubuntu 9.10 installed on it's own partition. Once in a while I would like to start it as a guest OS under Windows XP. While it starts and working fine, I can't login with gdm, after I enter login and password, X crashes and I'm at login prompt again. I can login with console just fine. Is there anything I can do prevent X from crashing?

  Read the article

• vmware host stuck after adding a virtual drive to client

  - by Saariko

  I use ESXi 5.0 I created a virtual (400GB) drive (located on an iSCSI mapped drive), and tried to add it to a specific client on the host. The task has stopped at 11%. After over an hour, it seems that everything is pretty stuck. Looking at the datastore - it says that 400GB are allocated, but I don't see the new drive with the client. How can I check if the process is still working? or should I restart the host and pray for good?

  Read the article

• File corruption (bad checksums) in large files copied to VMware guest

  - by AllanA

  In setting up a development lab, I've got a desktop system running ESXi 4.1.0 (free license) on SATA RAID 0 (already purchased and configured when I started this job; I'm open to hardware input as it pertains to my problem.) Its guests so far include two Win2008 Server R2 64-bit VMs and on Ubuntu 10.04 64-bit VM. I'm installing onto the Windows servers. We've been copying off some fairly large files (over a gigabyte) for an installation, hoping to install more quickly from a (virtual) hard drive than from the network for from BD-ROM. The problem is that they keep coming up with different checksums from the originals. The file sizes are the same, but md5sum reports different numbers (and so does the installer, as it refuses to continue when the checksums don't match.) I've tried copying directly from the BD-ROM (attaching the OS drive to the host system's physical drive). I've tried copying the large files onto a co-worker's Windows machine from his Blu-Ray drive; when I do that, the checksums match. But when I copy from his machine to the VM guest over a network share, the checksums no longer match. Thinking this meant a corrupt destination drive, I deleted it in vSphere and added another freshly created drive. The problem persists. I'm not sure what to try next.

  Read the article

• VMware Workstation 7 build 203739 - Capture Movie Mouse Pointer Not Visible

  - by BMIVM

  Hi, I have noticed that whenever I create a Capture Movie, the movie is fine but the mouse pointer is not visible at all. The clicks are on buttons file menus are executed but is hard for a viewer of the capturre movie session to follow the recording smoothly. This was not a problem in previous versions of WorkStation. Is this a bug or is there a setting I can set to see the mouse pointer? Note: VM Tools are installed, Host is Vista Ultimate Edtion SP1, x64 and the guest is a Win XP SP2. Thanks in advance for your help.

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >