Search Results

Search found 23897 results on 956 pages for 'installation configuration'.

Page 290/956 | < Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297  | Next Page >

• Install server 2012 on HP ML110 G7 with B110i controller, no disks found

  - by Molotch

  I'm trying to install Server 2012 on a HP ML110 G7 with a B110i controller and four non hot-swappable SATA drives. I just can't get the Server 2012 boot disk PE environment to find any disks. I have downloaded the latest SPP (Service Pack for Proliant 2012.10) and flashed the BIOS. I have tried two different HP drivers for B110i and Windows X64, 6.18.0.64 and 6.18.2.64 to no avail. I have tried setting the controller to both AHCI and legacy mode in the BIOS, no difference. HP:s SmartStart disc for G7 servers only support installation of up to Windows Server 2008R2. HP:s installation instructions for Server 2012 Essentials says boot from the windows disk and use the storage drivers found on the SPP (I can't find any storage drivers on the SPP disk).

  Read the article

• Installing Win7 over PXE through Serva fails on Loading Network Resources

  - by Armand

  Trying to install Win7 OS to a Lenovo E335 with no DVD/CD. I have to do it either over PXE/Network or USB. Although I am able to get passt the installation menu of Serva, it fails on Loading Network Resources ... FAILED No NIC/Driver, ABORTING! This is the only log on the Serva Client PC and nothing on the Serva-server. Would appreciate if someone can tell me how to go pass this error. THe network card works fine, it has already loaded the Windows installation structure on a X: drive on the new laptop. Another detail: I am using a normal Ethernet Cable to connect the PCs. Should this be enough or a crossover cable is a must in this case?

  Read the article

• Static IP settings on Windows 2003 server not getting saved

  - by Prashant Mandhare

  We have a Dell PowerEgde 1950 server with Broadcom NetXtreme gigabit ethernet card, and we are facing a strange problem with static IP assignment. When we assign a static IP to this broadcom NIC, settings are not getting saved. Following are the steps to reproduce problem open TCP/IP properties window for broadcom NIC manually enter static IP address and other details like gateway, DNS, etc. apply and close properties dialog. re-open TCP/IP properties windows, you will see your static IP settings lost and changed to "obtain IP address manually" but when checked using ipconfig command, you will still see your same static IP settings but, when checked using ipconfig command after rebooting server, these static ip settings are completely gone and automatically obtained IP is assigned Supplementary information: Recently we had formatted this server and installed windows 2003 from OEM windows setup CD (not from OS installation CD received from Dell). After windows installation was over, broadcom NIC drivers were installed.

  Read the article

• Exchange 2010 setup /prepareAD fails to run

  - by MadBoy

  I've tried installing Exchange 2010 on Windows Server 2008 R2 (only domain controller and all-in-one system). I did setup.exe /prepareAD, setup /prepareSchema and it worked fine the first time I did it. Unfortunately due to problem with Hub Transport installation related to (at least from what I've read) IPv6 being disabled (some say disabling it helped them while some enabling helped them). I did it the proper way by using registry entry to disable IPv6 but it still errored out. So i managed to uninstall everything (renamed some old entries in registry of failed Hub Transport roles and tried to reinstal Exchange after rebooting server. Unfortunetly running setup /prepareAD now gives an error: D:setup /PrepareAd Welcome to Microsoft Exchange Server 2010 Unattended Setup By continuing the installation process, you agree to the license terms of Microsoft Exchange Server 2010. If you don't accept these license terms, please cancel the installation. To review these license terms, please go to http://go.microsoft.com/fwlink/?LinkId=150127&clcid=0x409/ Press any key to cancel setup................ No key presses were detected. Setup will continue. Preparing Exchange Setup Copying Setup Files ......................... COMPLETED No server roles will be installed Performing Microsoft Exchange Server Prerequisite Check Organization Checks ......................... COMPLETED Setup is going to prepare the organization for Exchange 2010 by using 'Setup /P repareAD'. No Exchange 2007 server roles have been detected in this topology. Af ter this operation, you will not be able to install any Exchange 2007 server rol es. Configuring Microsoft Exchange Server Organization Preparation ......................... FAILED The following error was generated when "$error.Clear(); buildToBuildUpgrade -ExsetDataAtom -AtomName OrgLevelCt -DomainController $RoleDomainController" was run: "An error occurred with error code '2147504140' and message 'The data type can't be converted to or from a native Active Directory data type.'.". The Exchange Server setup operation did not complete. Visit http://support.micro soft.com and enter the Error ID to find more information. Exchange Server setup encountered an error. Unfortunetly if i rerun the setup it complains that it needs setup /prepareAD to be run first. Basically all that works now is setup /PrepareSchema and setup /PrepareDomain complains that prepareAD wasn't done. For full information I'm also attaching error I had before I've uninstalled everything and tried again: Hub Transport Role Failed Error: The following error was generated when "$error.Clear(); install-ExsetdataAtom -AtomName SharedMachineSettings -DomainController $RoleDomainController" was run: "An error occurred with error code '2147950640' and message 'There is no such object on the server.'.". An error occurred with error code '2147950640' and message 'There is no such object on the server.'.

  Read the article

• Plesk 11: install Apache with SNI support

  - by Ueli

  If I try to update from standard Apache to Apache with SNI support with the Plesk installation program (example.com:8447), I get an error, that I have to remove apr-util-ldap-1.4.1-1.el5.x86_64 It's in german: Informationen über installierte Pakete abrufen... Installation started in background Datei wird heruntergeladen PSA_11.0.9/dist-rpm-CentOS-5-x86_64/build-11.0.9-cos5-x86_64.hdr.gz: 11%..20%..30%..40%..50%..60%..70%..81%..91%..100% fertig. Datei wird heruntergeladen PSA_11.0.9/update-rpm-CentOS-5-x86_64/update-11.0.9-cos5-x86_64.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% fertig. Datei wird heruntergeladen PSA_11.0.9/thirdparty-rpm-CentOS-5-x86_64/thirdparty-11.0.9-cos5-x86_64.hdr.gz: 10%..26%..43%..77%..100% fertig. Datei wird heruntergeladen BILLING_11.0.9/thirdparty-rpm-RedHat-all-all/thirdparty-11.0.9-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen BILLING_11.0.9/update-rpm-RedHat-all-all/update-11.0.9-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen SITEBUILDER_11.0.10/thirdparty-rpm-RedHat-all-all/thirdparty-11.0.10-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen SITEBUILDER_11.0.10/dist-rpm-RedHat-all-all/build-11.0.10-rhall-all.hdr.gz: 10%..22%..31%..41%..51%..65%..70%..80%..90%..100% fertig. Datei wird heruntergeladen SITEBUILDER_11.0.10/update-rpm-RedHat-all-all/update-11.0.10-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen APACHE_2.2.22/thirdparty-rpm-CentOS-5-x86_64/thirdparty-2.2.22-rh5-x86_64.hdr.gz: 19%..25%..35%..83%..93%..100% fertig. Datei wird heruntergeladen APACHE_2.2.22/update-rpm-CentOS-5-x86_64/update-2.2.22-rh5-x86_64.hdr.gz: 100% fertig. Datei wird heruntergeladen BILLING_11.0.9/dist-rpm-RedHat-all-all/build-11.0.9-rhall-all.hdr.gz: 11%..23%..31%..41%..52%..62%..73%..83%..91%..100% fertig. Datei wird heruntergeladen APACHE_2.2.22/dist-rpm-CentOS-5-x86_64/build-2.2.22-rh5-x86_64.hdr.gz: 36%..50%..100% fertig. Pakete, die installiert werden müssen, werden ermittelt. -> Error: Mit der Installation kann erst fortgefahren werden, wenn das Paket apr-util-ldap-1.4.1-1.el5.x86_64 vom System entfernt wird. Es wurden nicht alle Pakete installiert. Bitte beheben Sie dieses Problem und versuchen Sie, die Pakete erneut zu installieren. Wenn Sie das Problem nicht selbst beheben können, wenden Sie sich bitte an den technischen Support. - «Error: The installation can be continued only if the package apr-util-ldap-1.4.1-1.el5.x86_64 is removed from the system» But I can't uninstall apr-util-ldap-1.4.1-1.el5.x86_64 without removing a lot of important packages: Dependencies Resolved ========================================================================================================================================= Package Arch Version Repository Size ========================================================================================================================================= Removing: apr-util-ldap x86_64 1.4.1-1.el5 installed 9.0 k Removing for dependencies: SSHTerm noarch 0.2.2-10.12012310 installed 4.9 M awstats noarch 7.0-11122114.swsoft installed 3.5 M httpd x86_64 2.2.23-3.el5 installed 3.4 M mailman x86_64 3:2.1.9-6.el5_6.1 installed 34 M mod-spdy-beta x86_64 0.9.3.3-386 installed 2.4 M mod_perl x86_64 2.0.4-6.el5 installed 6.8 M mod_python x86_64 3.2.8-3.1 installed 1.2 M mod_ssl x86_64 1:2.2.23-3.el5 installed 179 k perl-Apache-ASP x86_64 2.59-0.93298 installed 543 k php53 x86_64 5.3.3-13.el5_8 installed 3.4 M php53-sqlite2 x86_64 5.3.2-11041315 installed 366 k plesk-core x86_64 11.0.9-cos5.build110120608.16 installed 79 M plesk-l10n noarch 11.0.9-cos5.build110120827.16 installed 21 M pp-sitebuilder noarch 11.0.10-38572.12072100 installed 181 M psa x86_64 11.0.9-cos5.build110120608.16 installed 473 k psa-awstats-configurator noarch 11.0.9-cos5.build110120606.19 installed 0.0 psa-backup-manager x86_64 11.0.9-cos5.build110120608.16 installed 8.6 M psa-backup-manager-vz x86_64 11.0.0-cos5.build110120123.10 installed 1.6 k psa-fileserver x86_64 11.0.9-cos5.build110120608.16 installed 364 k psa-firewall x86_64 11.0.9-cos5.build110120608.16 installed 550 k psa-health-monitor noarch 11.0.9-cos5.build110120606.19 installed 2.3 k psa-horde noarch 3.3.13-cos5.build110120606.19 installed 20 M psa-hotfix1-9.3.0 x86_64 9.3.0-cos5.build93100518.16 installed 23 k psa-imp noarch 4.3.11-cos5.build110120606.19 installed 12 M psa-ingo noarch 1.2.6-cos5.build110120606.19 installed 5.1 M psa-kronolith noarch 2.3.6-cos5.build110120606.19 installed 6.3 M psa-libxml-proxy x86_64 2.7.8-0.301910 installed 1.2 M psa-mailman-configurator x86_64 11.0.9-cos5.build110120608.16 installed 5.5 k psa-migration-agents x86_64 11.0.9-cos5.build110120608.16 installed 169 k psa-migration-manager x86_64 11.0.9-cos5.build110120608.16 installed 1.1 M psa-mimp noarch 1.1.4-cos5.build110120418.19 installed 2.9 M psa-miva x86_64 1:5.06-cos5.build1013111101.14 installed 4.5 M psa-mnemo noarch 2.2.5-cos5.build110120606.19 installed 4.1 M psa-mod-fcgid-configurator x86_64 2.0.0-cos5.build1013111101.14 installed 0.0 psa-mod_aclr2 x86_64 12021319-9e86c2f installed 8.1 k psa-mod_fcgid x86_64 2.3.6-12050315 installed 222 k psa-mod_rpaf x86_64 0.6-12021310 installed 7.7 k psa-passwd noarch 3.1.3-cos5.build1013111101.14 installed 3.7 M psa-php53-configurator x86_64 1.6.2-cos5.build110120608.16 installed 6.4 k psa-rubyrails-configurator x86_64 1.1.6-cos5.build1013111101.14 installed 0.0 psa-spamassassin x86_64 11.0.9-cos5.build110120608.16 installed 167 k psa-turba noarch 2.3.6-cos5.build110120606.19 installed 6.1 M psa-updates noarch 11.0.9-cos5.build110120704.10 installed 0.0 psa-vhost noarch 11.0.9-cos5.build110120606.19 installed 160 k psa-vpn x86_64 11.0.9-cos5.build110120608.16 installed 1.9 M psa-watchdog x86_64 11.0.9-cos5.build110120608.16 installed 2.9 M webalizer x86_64 2.01_10-30.1 installed 259 k Transaction Summary ========================================================================================================================================= Remove 48 Package(s) Reinstall 0 Package(s) Downgrade 0 Package(s) What should I do?

  Read the article

• IIS 7.5, Multiple Application Pools, and URL Rewriting (403.18 -- Forbidden)

  - by Jerry Hewett

  Is there any way to configure IIS 7.5 to perform URL rewrites to different application pools on the same site without running into a 403.18 error? We're using Helicon ISAPI Rewrite 3 on IIS 6 and it's working like a charm. The root-level "application" is running under it's own application pool, and on IIS 6 we have no problems doing URL rewrites from that application pool to any one of the other four application pools. But when I copy the same server configuration information over to IIS 7.5 the URL rewrites to any of the other application pools fail with a "403.18 -- Forbidden" error. The weird bit is that the IIS 6 is not (at least as far as I can tell, by looking at the site Service configuration dialog) running under IIS 5 emulation mode, so somehow the rewrites aren't throwing 403.18 errors. So something must be different... but whatever it is, I sure haven't been able to figure it out. Btw, we're not married to Helicon ISAPI Rewrite. If there's another way to preserve our current rewrite configuration rules using another module or method I'd be more than happy to use it.

  Read the article

• IIS 7.5, Multiple Application Pools, and URL Rewriting (403.18 -- Forbidden)

  - by Jerry Hewett

  Is there any way to configure IIS 7.5 to perform URL rewrites to different application pools on the same site without running into a 403.18 error? We're using Helicon ISAPI Rewrite 3 on IIS 6 and it's working like a charm. The root-level "application" is running under it's own application pool, and on IIS 6 we have no problems doing URL rewrites from that application pool to any one of the other four application pools. But when I copy the same server configuration information over to IIS 7.5 the URL rewrites to any of the other application pools fail with a "403.18 -- Forbidden" error. The weird bit is that the IIS 6 is not (at least as far as I can tell, by looking at the site Service configuration dialog) running under IIS 5 emulation mode, so somehow the rewrites aren't throwing 403.18 errors. So something must be different... but whatever it is, I sure haven't been able to figure it out. Btw, we're not married to Helicon ISAPI Rewrite. If there's another way to preserve our current rewrite configuration rules using another module or method I'd be more than happy to use it.

  Read the article

• Changes made to cli's php.ini not taking effect

  - by Sandeepan Nath

  I have two php.ini files - /etc/php.ini which loads in case of cli /opt/lampp/etc/php.ini which loads in case of browser. I am able to use PHP's Mailparse extension after adding the line extension=mailparse.so in the /opt/lampp/etc/php.ini and restarting lampp. But I am not able to load the same in case of command line - getting PHP Fatal error: Call to undefined function mailparse_msg_create() in ... mailparse_msg_create() is a part of the Mailparse extension. I tried by relogging with the user after making the change and even restarting the system. What needs to be done so that the change takes effect. Update I checked that php -i | grep 'Configuration File' gives PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mailparse.so' - /usr/lib/php/modules/mailparse.so: cannot open shared object file: No such file or directory in Unknown on line 0 Configuration File (php.ini) Path => /etc Loaded Configuration File => /etc/php.ini Update 2 I copied the mailparse.so from /opt/lampp/lib/php/extensions/no-debug-non-zts-20090626 and put it in /usr/lib/php/modules. I added extension=mailparse.so to /etc/php.ini as well. But it still showed this warning PHP Warning: PHP Startup: Unable to load dynamic library ... As told by Lekensteyn, I did ldd /usr/lib/php/modules/mailparse.so and got ldd: warning: you do not have execution permission for /usr/lib/php/modules/mailparse.so' So I gave execute permission. Then ldd /usr/lib/php/modules/mailparse.so showed linux-gate.so.1 => (0x00110000) libc.so.6 => /lib/libc.so.6 (0x0011d000) /lib/ld-linux.so.2 (0x003aa000) which looks normal. BUt now, running php command says PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mailparse.so' - /usr/lib/php/modules/mailparse.so: undefined symbol: mbfl_name2no_encoding in Unknown on line 0

  Read the article

• Override <customErrors mode="Off"/> message from .NET Framework even when in web.config detailed err

  - by GrZeCh

  Hello, is this possible to override .NET Framework error: Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. ... <!-- Web.Config Configuration File --> <configuration> <system.web> <customErrors mode="Off"/> </system.web> </configuration> even if web.config (IIS7.5) is set to <httpErrors errorMode="Detailed"/> ? I'm asking because my default setting for IIS7 is <deployment retail="true" /> so no error is being showed and only adding additional error handling module to website will allow to see errors generated by this application and thats why I want to override this message to inform users about it. Any ideas? Thanks

  Read the article

• flask, lighttpd with fastcgi can't get it to work

  - by kurojishi

  i'm tring to deploy a simple flask script to a lighttpd server with fastcgi. this is the configuration file for lighttpd builded using the flask documentation http://flask.pocoo.org/docs/deploying/fastcgi/#configuring-lighttpd server.modules = ( "mod_access", "mod_alias", "mod_compress", "mod_redirect", "mod_rewrite", "mod_fastcgi", ) server.document-root = "/var/www" server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) server.errorlog = "/var/log/lighttpd/error.log" server.pid-file = "/var/run/lighttpd.pid" server.username = "www-data" server.groupname = "www-data" index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", " index.lighttpd.html" ) url.access-deny = ( "~", ".inc" ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) var.home_dir = "/var/lib/lighttpd" var.socket_dir = home_dir + "sockets/" ## Use ipv6 if available #include_shell "/usr/share/lighttpd/use-ipv6.pl" dir-listing.encoding = "utf-8" server.dir-listing = "enable" compress.cache-dir = "/var/cache/lighttpd/compress/" compress.filetype = ( "application/x-javascript", "text/css", "text/html", "text/plain" ) include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" fastcgi.server = ("weibo/callback.fcgi" => (( "socket" => "/tmp/weibocrawler-fcgi.sock", "bin-path" => "/var/www/weibo/callback.fcgi", "check-local" => "disable", "max-procs" => 1 )) ) url.rewrite-once = ( "^(/weibo($|/.*))$" => "$1", "^(/.*)$" => "weibo/callback.fcgi$1" and this is the script i'm tring to run: #!/home/nrl/kuro/weiboenv/bin/python from flup.server.fcgi import WSGIServer from callback import app if __name__ == '__main__': WSGIServer(application, bindAddress='/tmp/weibocrawler-fcgi.sock').run() but i have this error testing the configuration file i get this error: 2013-07-02 17:15:42: (configfile.c.912) source: lighttpd.conf.new line: 52 pos: 1 parser failed somehow near here: weibo/callback.fcgi$1 when i remove the urlrewrite i get these errors in the log even if the daemon start: 2013-07-02 16:25:53: (log.c.166) server started 2013-07-02 16:25:53: (mod_fastcgi.c.1104) the fastcgi-backend fcgi.py failed to start: 2013-07-02 16:25:53: (mod_fastcgi.c.1108) child exited with status 2 fcgi.py 2013-07-02 16:25:53: (mod_fastcgi.c.1111) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. 2013-07-02 16:25:53: (mod_fastcgi.c.1399) [ERROR]: spawning fcgi failed. 2013-07-02 16:25:53: (server.c.938) Configuration of plugins failed. Going down.

  Read the article

• local msmtp and ovh hosting

  - by klez

  I have my personal email hosted on OVH (personal hosting plan) and I'm not able to send mails using msmtp. Here's a typical session ignoring system configuration file /etc/msmtprc: File o directory non esistente loaded user configuration file /home/klez/.msmtprc using account default from /home/klez/.msmtprc host = ssl0.ovh.net port = 465 timeout = off protocol = smtp domain = localhost auth = choose user = federicoculloca%xxxxxxx password = * ntlmdomain = (not set) tls = on tls_starttls = off tls_trust_file = (not set) tls_crl_file = (not set) tls_fingerprint = (not set) tls_key_file = (not set) tls_cert_file = (not set) tls_certcheck = off tls_force_sslv3 = off tls_min_dh_prime_bits = (not set) tls_priorities = (not set) auto_from = off maildomain = (not set) from = federicoculloca@xxxxxxxx dsn_notify = (not set) dsn_return = (not set) keepbcc = off logfile = (not set) syslog = (not set) reading recipients from the command line TLS certificate information: Owner: Common Name: ssl0.ovh.net Organizational unit: Domain Control Validated Issuer: Common Name: OVH Secure Certification Authority Organization: OVH SAS Organizational unit: Low Assurance Country: FR Validity: Activation time: lun 31 gen 2011 01:00:00 CET Expiration time: mer 15 feb 2012 00:59:59 CET Fingerprints: SHA1: F9:DC:41:F9:A2:38:51:9B:56:E4:98:E6:CD:81:31:42:E6:0E:26:6D MD5: FC:EC:F3:8F:28:E4:7E:28:99:89:E6:BB:C9:DF:71:CE <-- 220 ns0.ovh.net ssl0.ovh.net. You connect to mail427.ha.ovh.net ESMTP --> EHLO localhost <-- 250-ssl0.ovh.net. You connect to mail427.ha.ovh.net <-- 250-AUTH LOGIN PLAIN <-- 250-AUTH=LOGIN PLAIN <-- 250-PIPELINING <-- 250-8BITMIME <-- 250 SIZE 109000000 --> AUTH PLAIN xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx <-- 235 ok, go ahead (#2.0.0) --> MAIL FROM:<federicoculloca@xxxxx> --> RCPT TO:<[email protected]> --> DATA <-- 250 ok <-- 250 ok <-- 354 go ahead --> hello world --> . <-- 554 mail server permanently rejected message (#5.3.0) And my configuration # ~/.msmtp # Mostly from Peter Garrett's examples # https://lists.ubuntu.com/archives/ubuntu-users/2007-September/122698.html # Accounts from Scott Robbins' `A Quick Guide to Mutt' # http://home.nyc.rr.com/computertaijutsu/mutt.html account xxxxx host ssl0.ovh.net from federicoculloca@xxxxxx auth on user federicoculloca%xxxxxx password xxxxxx tls on tls_certcheck off tls_starttls off Any idea?

  Read the article

• Installing OpenSSL that supports SNI along with previous version of OpenSSL

  - by gh0sT

  So I learned that to host multiple HTTPS websites on the same IP address you need an OpenSSL version that supports SNI (0.9.8f and higher). My RHEL5 box currently has 0.9.8e and Apache version httpd-2.2.26-2.el5. According to a same question here it's not a good idea to replace the original version of OpenSSL and instead to have a parallel installation. It however doesn't explicitly mention how to achieve this. So my questions are: How do I have an alternate installation of OpenSSL without breaking the system? How do I make Apache to use this version of OpenSSL and not the original one? A detailed guide would be extremely helpful.

  Read the article

• networking through openstack installed on vm

  - by Mandar Katdare

  I am trying to set up a test installation of Openstack on a Ubuntu 12.04 VM running on a ESXi server. So far I have been able to launch the VMs on the ESXi, however am unable to assign IP addresses to them. As the VM with the Openstack installation has a single public IP, I wish to assign IPs to the VMs create through Openstack so that they can directly interact with the public network itself without having a separate private network. So I feel that bridging would not be the correct option here. But am unable to find the correct documents to go ahead with such an install. My ifconfig looks as follows: eth0 Link encap:Ethernet HWaddr 00:0c:29:6f:8a:d7 inet addr:192.168.4.167 Bcast:192.168.4.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe6f:8ad7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:391640 errors:33 dropped:98 overruns:0 frame:0 TX packets:545044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40303931 (40.3 MB) TX bytes:763127348 (763.1 MB) Interrupt:18 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:146127 errors:0 dropped:0 overruns:0 frame:0 TX packets:146127 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:799815763 (799.8 MB) TX bytes:799815763 (799.8 MB) virbr0 Link encap:Ethernet HWaddr 8a:80:33:32:63:a0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) The eth0 is the adapter that I intend to use for all communication. My nova.conf looks as follows: --dhcpbridge_flagfile=/etc/nova/nova.conf --dhcpbridge=/usr/bin/nova-dhcpbridge --logdir=/var/log/nova --state_path=/var/lib/nova --lock_path=/var/lock/nova --allow_admin_api=true --use_deprecated_auth=false --auth_strategy=keystone --scheduler_driver=nova.scheduler.simple.SimpleScheduler --s3_host=192.168.4.167 --ec2_host=192.168.4.167 --rabbit_host=192.168.4.167 --cc_host=192.168.4.167 --nova_url=http://192.168.4.167:8774/v1.1/ --routing_source_ip=192.168.4.167 --glance_api_servers=192.168.4.167:9292 --image_service=nova.image.glance.GlanceImageService --iscsi_ip_prefix=192.168.4 --sql_connection=mysql://novadbadmin:[email protected]/nova --ec2_url=http://192.168.4.167:8773/services/Cloud --keystone_ec2_url=http://192.168.4.167:5000/v2.0/ec2tokens --api_paste_config=/etc/nova/api-paste.ini --libvirt_type=kvm --libvirt_use_virtio_for_bridges=true --start_guests_on_host_boot=true --resume_guests_state_on_host_boot=true --vnc_enabled=true --vncproxy_url=http://192.168.4.167:6080 --vnc_console_proxy_url=http://192.168.4.167:6080 # network specific settings --network_manager=nova.network.manager.FlatDHCPManager --public_interface=eth0 --vmwareapi_host_ip=192.168.4.254 --vmwareapi_host_username=**** --vmwareapi_host_password=**** --vmwareapi_wsdl_loc=http://127.0.0.1:8080/wsdl/vim25/vimService.wsdl --fixed_range=192.168.4.190/24 --floating_range=192.168.4.190/24 --network_size=32 --flat_network_dhcp_start=192.168.4.190 --flat_injected=False --force_dhcp_release --iscsi_helper=tgtadm --connection_type=vmwareapi --root_helper=sudo nova-rootwrap --verbose --libvirt_use_virtio_for_bridges --ec2_private_dns_show --novnc_enabled=true --novncproxy_base_url=http://192.168.4.167:6080/vnc_auto.html --vncserver_proxyclient_address=192.168.4.167 --vncserver_listen=192.168.4.167 192.168.4.167 is my VM with the Openstack installation and 192.168.4.254 is my ESXi server on which the VM runs. Can anyone advice me about how to proceed? Thanks, Mandar

  Read the article

• Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

  - by Chris Beach

  This question already has an answer here: Cant find my harddrives in ubuntu installation? 2 answers I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When I came to install Ubuntu (14.04.1), both drives appeared during the setup process. I was only expecting to see the logical drive, although I'm a complete novice with RAID. I've read that the HP Proliant Microservers don't have "proper" RAID support, and require some kind of driver to be installed. I've tried a few HP utilities from the following apt repo: deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free On installation, most say "server not supported" Would appreciate your advice.

  Read the article

• CheckPoint Endpoint Security VPN client co-existing with Windows VPN

  - by Nils

  Hey guys, I work as a consultant for a firm with a Checkpoint firewall. I have downloaded and installed the Checkpoint Endpoint Security VPN client. During the installation, I answered no to any questions pertaining firewall etc. - I just wanted the VPN client itself. However, after the installation, I am no longer able to use any of my pre-existing Windows VPN client connections. It does not matter whether the Checkpoint UI is running or not - shutting down the client does not fix the problem. Uninstalling Checkpoint VPN on the other hand fixes the problem. Does anyone know if it is possible to have both VPN clients work while being installed simultaneously? I don't need them to stay connected simultaneously, just avoiding to install/uninstall the Checkpoint client every time I have to use it is perfectly good. Thanks!

  Read the article

• Reboot loop after sysprep of AD machine

  - by rboarman

  Major screw-up here and I need to find out how much trouble I am in. I have an AD machine that is running Server 2008 R2, hyperv, DHCP and DNS. On the hyperv machine, I have a backup AD instance running along with a handfull of other server 2008 instances. Sysprep was run on the hyperv machine instead of one of the instances. I am attempting to bring the machine back up so I can try a system restore. When I boot the hyperv machine, I get an error that says “Windows could not complete the installation. To install windows on this computer , restart the installation” This message occurs in safe mode, AD restore mode and in last known configuration mode. How can I get my OS to boot at this point? Do I need to reinstall 2008 R2 from scratch?

  Read the article

• SQL Server 2008 Express + Reporting Services on Windows 7

  - by TimothyP

  I'm trying to install SQL Server Express 2008 and Reporting Services on a x64 Windows 7 Machine for development purposes. I've installed SQL Server 2008 Express with the Microsoft Web Platform Installer I had to manually enable the SQL Server Browser in the Sql Server Configuration Manager and tried to enable the SQL Server Agent but that simply doesn't work. Keeps throwing an RPC error: "The remote procedure call failed. [0x800706be]". The start mode is set to Disabled and I cannot change it. Even though I selected the SQL Server Express with advanced services in the web platform installer I could not find any reference to SQL Server Reporting Services so I used the SQL Server Installation Center x64 application to "upgrade" to SQL Server Express 2008 with advanced services... this installed many things but still I couldn't find any reference to SQL Server Reporting Services other than an application called: "Reporting Services Configuration Manager" This opens up a dialog called "Reporting Services Configuration Connection" which is asking for a server name (shows the name of my machine) and a Find button. When I click the find button I get: "Unable to connect to the Reporting Server WMI provider. Details: Invalid Namespace". I found some references on the web to solve this problem, but they refer to a directory: "%ProgamFiles%\Microsoft SQL Server\MSRS10.SQL2008\Reporting Services\" which does not exist anywhere on my system. (The directories for SQL Server are there, but there is no Reporting Services directory anywhere). What am I doing wrong here? Wasn't the web platform installer supposed to handle all this? Thnx for any advice. PS: Most google results refer to 2005 vs 2008 problems, but I never had 2005 installed on this system, it's a newly installed development machine.

  Read the article

• Server 2008 print server down / access denied

  - by johnnyb10

  I have two Server 2008 servers (both running as VMs in VMware). One is a Full Installation, and the other is a Server Core installation. I just installed Print Services on both of them. In Print Management on the Full server, I added the Server Core print server (so now two print servers are listed in Print Management). However, the icon for my Server Core print server has a red, down-pointing arrow (indicating that it is down, I suppose). And when I right-click it and click Add Printer, I get a message saying that access is denied. Can someone tell me how to bring up or check on the status of the Server Core print server. Obviously, I'm somewhat of a noob with this stuff. Thanks in advance...

  Read the article

• Last (I think and hope) problems configuring SSL certificate with Apache and VirtualHosts

  - by user65567

  Finally I set apache2 to get a single certificate for all subdomains. [...] # Go ahead and accept connections for these vhosts # from non-SNI clients SSLStrictSNIVHostCheck off # Apache setup which will listen for and accept SSL connections on port 443. Listen 443 # Listen for virtual host requests on all IP addresses NameVirtualHost *:443 # Because this virtual host is defined first, it will # be used as the default if the hostname is not received # in the SSL handshake, e.g. if the browser doesn't support # SNI. <VirtualHost *:443> ServerName domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/domain/public" <Directory "/Users/<my_user_name>/Sites/domain/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> <VirtualHost *:443> ServerName subdomain1.domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/subdomain1/public" <Directory "/Users/<my_user_name>/Sites/subdomain1/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> <VirtualHost *:443> ServerName subdomain2.domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/subdomain2/public" <Directory "/Users/<my_user_name>/Sites/subdomain2/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> So, for example, I can correctly access https://subdomain1.domain.localhost https://subdomain2.domain.localhost ... Now, anyway, I have problems on accessing http://subdomain1.domain.localhost http://subdomain2.domain.localhost ... Since I use a Mac Os, on accessing the "http: version", I get a default page "Your website." (instead of a error). Why does it happen?

  Read the article

• Install ImageMagick on linux shared hosting

  - by mr-euro

  Is the installation of ImageMagick library possible for a non-root user in a shared hosting environment?

  Read the article

• Converting Lighttpd config to NginX with php-fpm

  - by Le Dude

  Having so much issue with NginX configuration since I'm new with NginX. Been using Lighttpd for quite sometime. Here are the base info. New Machine - CentOS 6.3 64 Bit - NginX 1.2.4-1.e16.ngx - Php-FPM 5.3.18-1.e16.remi Old Machine - CentOS 6.2 64Bit - Lighttpd 1.4.25-3.e16 Original Lighttpd config file: ####################################################################### ## ## /etc/lighttpd/lighttpd.conf ## ## check /etc/lighttpd/conf.d/*.conf for the configuration of modules. ## ####################################################################### ####################################################################### ## ## Some Variable definition which will make chrooting easier. ## ## if you add a variable here. Add the corresponding variable in the ## chroot example aswell. ## var.log_root = "/var/log/lighttpd" var.server_root = "/var/www" var.state_dir = "/var/run" var.home_dir = "/var/lib/lighttpd" var.conf_dir = "/etc/lighttpd" ## ## run the server chrooted. ## ## This requires root permissions during startup. ## ## If you run Chrooted set the the variables to directories relative to ## the chroot dir. ## ## example chroot configuration: ## #var.log_root = "/logs" #var.server_root = "/" #var.state_dir = "/run" #var.home_dir = "/lib/lighttpd" #var.vhosts_dir = "/vhosts" #var.conf_dir = "/etc" # #server.chroot = "/srv/www" ## ## Some additional variables to make the configuration easier ## ## ## Base directory for all virtual hosts ## ## used in: ## conf.d/evhost.conf ## conf.d/simple_vhost.conf ## vhosts.d/vhosts.template ## var.vhosts_dir = server_root + "/vhosts" ## ## Cache for mod_compress ## ## used in: ## conf.d/compress.conf ## var.cache_dir = "/var/cache/lighttpd" ## ## Base directory for sockets. ## ## used in: ## conf.d/fastcgi.conf ## conf.d/scgi.conf ## var.socket_dir = home_dir + "/sockets" ## ####################################################################### ####################################################################### ## ## Load the modules. include "modules.conf" ## ####################################################################### ####################################################################### ## ## Basic Configuration ## --------------------- ## server.port = 80 ## ## Use IPv6? ## #server.use-ipv6 = "enable" ## ## bind to a specific IP ## #server.bind = "localhost" ## ## Run as a different username/groupname. ## This requires root permissions during startup. ## server.username = "lighttpd" server.groupname = "lighttpd" ## ## enable core files. ## #server.core-files = "disable" ## ## Document root ## server.document-root = server_root + "/lighttpd" ## ## The value for the "Server:" response field. ## ## It would be nice to keep it at "lighttpd". ## #server.tag = "lighttpd" ## ## store a pid file ## server.pid-file = state_dir + "/lighttpd.pid" ## ####################################################################### ####################################################################### ## ## Logging Options ## ------------------ ## ## all logging options can be overwritten per vhost. ## ## Path to the error log file ## server.errorlog = log_root + "/error.log" ## ## If you want to log to syslog you have to unset the ## server.errorlog setting and uncomment the next line. ## #server.errorlog-use-syslog = "enable" ## ## Access log config ## include "conf.d/access_log.conf" ## ## The debug options are moved into their own file. ## see conf.d/debug.conf for various options for request debugging. ## include "conf.d/debug.conf" ## ####################################################################### ####################################################################### ## ## Tuning/Performance ## -------------------- ## ## corresponding documentation: ## http://www.lighttpd.net/documentation/performance.html ## ## set the event-handler (read the performance section in the manual) ## ## possible options on linux are: ## ## select ## poll ## linux-sysepoll ## ## linux-sysepoll is recommended on kernel 2.6. ## server.event-handler = "linux-sysepoll" ## ## The basic network interface for all platforms at the syscalls read() ## and write(). Every modern OS provides its own syscall to help network ## servers transfer files as fast as possible ## ## linux-sendfile - is recommended for small files. ## writev - is recommended for sending many large files ## server.network-backend = "linux-sendfile" ## ## As lighttpd is a single-threaded server, its main resource limit is ## the number of file descriptors, which is set to 1024 by default (on ## most systems). ## ## If you are running a high-traffic site you might want to increase this ## limit by setting server.max-fds. ## ## Changing this setting requires root permissions on startup. see ## server.username/server.groupname. ## ## By default lighttpd would not change the operation system default. ## But setting it to 2048 is a better default for busy servers. ## ## With SELinux enabled, this is denied by default and needs to be allowed ## by running the following once : setsebool -P httpd_setrlimit on server.max-fds = 2048 ## ## Stat() call caching. ## ## lighttpd can utilize FAM/Gamin to cache stat call. ## ## possible values are: ## disable, simple or fam. ## server.stat-cache-engine = "simple" ## ## Fine tuning for the request handling ## ## max-connections == max-fds/2 (maybe /3) ## means the other file handles are used for fastcgi/files ## server.max-connections = 1024 ## ## How many seconds to keep a keep-alive connection open, ## until we consider it idle. ## ## Default: 5 ## #server.max-keep-alive-idle = 5 ## ## How many keep-alive requests until closing the connection. ## ## Default: 16 ## #server.max-keep-alive-requests = 18 ## ## Maximum size of a request in kilobytes. ## By default it is unlimited (0). ## ## Uploads to your server cant be larger than this value. ## #server.max-request-size = 0 ## ## Time to read from a socket before we consider it idle. ## ## Default: 60 ## #server.max-read-idle = 60 ## ## Time to write to a socket before we consider it idle. ## ## Default: 360 ## #server.max-write-idle = 360 ## ## Traffic Shaping ## ----------------- ## ## see /usr/share/doc/lighttpd/traffic-shaping.txt ## ## Values are in kilobyte per second. ## ## Keep in mind that a limit below 32kB/s might actually limit the ## traffic to 32kB/s. This is caused by the size of the TCP send ## buffer. ## ## per server: ## #server.kbytes-per-second = 128 ## ## per connection: ## #connection.kbytes-per-second = 32 ## ####################################################################### ####################################################################### ## ## Filename/File handling ## ------------------------ ## ## files to check for if .../ is requested ## index-file.names = ( "index.php", "index.rb", "index.html", ## "index.htm", "default.htm" ) ## index-file.names += ( "index.xhtml", "index.html", "index.htm", "default.htm", "index.php" ) ## ## deny access the file-extensions ## ## ~ is for backupfiles from vi, emacs, joe, ... ## .inc is often used for code includes which should in general not be part ## of the document-root url.access-deny = ( "~", ".inc" ) ## ## disable range requests for pdf files ## workaround for a bug in the Acrobat Reader plugin. ## $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## ## url handling modules (rewrite, redirect) ## #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.example.com/$1" ) ## ## both rewrite/redirect support back reference to regex conditional using %n ## #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} ## ## which extensions should not be handle via static-file transfer ## ## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi ## static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" ) ## ## error-handler for status 404 ## #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' ## #server.errorfile-prefix = "/srv/www/htdocs/errors/status-" ## ## mimetype mapping ## include "conf.d/mime.conf" ## ## directory listing configuration ## include "conf.d/dirlisting.conf" ## ## Should lighttpd follow symlinks? ## server.follow-symlink = "enable" ## ## force all filenames to be lowercase? ## #server.force-lowercase-filenames = "disable" ## ## defaults to /var/tmp as we assume it is a local harddisk ## server.upload-dirs = ( "/var/tmp" ) ## ####################################################################### ####################################################################### ## ## SSL Support ## ------------- ## ## To enable SSL for the whole server you have to provide a valid ## certificate and have to enable the SSL engine.:: ## ## ssl.engine = "enable" ## ssl.pemfile = "/path/to/server.pem" ## ## The HTTPS protocol does not allow you to use name-based virtual ## hosting with SSL. If you want to run multiple SSL servers with ## one lighttpd instance you must use IP-based virtual hosting: :: ## ## $SERVER["socket"] == "10.0.0.1:443" { ## ssl.engine = "enable" ## ssl.pemfile = "/etc/ssl/private/www.example.com.pem" ## server.name = "www.example.com" ## ## server.document-root = "/srv/www/vhosts/example.com/www/" ## } ## ## If you have a .crt and a .key file, cat them together into a ## single PEM file: ## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \ ## > /etc/ssl/private/lighttpd.pem ## #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" ## ## optionally pass the CA certificate here. ## ## #ssl.ca-file = "" ## ####################################################################### ####################################################################### ## ## custom includes like vhosts. ## #include "conf.d/config.conf" #include_shell "cat /etc/lighttpd/vhosts.d/*.conf" ## ####################################################################### ####################################################################### ### Custom Added by me #url.rewrite-once = (".*\.(js|ico|gif|jpg|png|css|jar|class)$" => "$0", "" => "/index.php") url.rewrite-once = ( ".*\?(.*)$" => "/index.php?$1", "^/js/.*$" => "$0", "^.*\.(js|ico|gif|jpg|png|css|swf |jar|class)$" => "$0", "" => "/index.php" ) # expire.url = ( "" => "access 1 days" ) include "myvhost-vhosts.conf" ####################################################################### Here is my Vhost file for lighttpd $HTTP["host"] =~ "192.168.8.35$" { server.document-root = "/var/www/lighttpd/qc41022012/public" server.errorlog = "/var/log/lighttpd/error.log" accesslog.filename = "/var/log/lighttpd/access.log" server.error-handler-404 = "/e404.php" } and here is my nginx.conf file user nginx; worker_processes 5; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/testsite/logs/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 65; #gzip on; # include /etc/nginx/conf.d/*.conf; ## I added this ## include /etc/nginx/sites-available/*; } Here is my NginX Vhost file server { server_name 192.168.8.91; access_log /var/log/nginx/myapps/logs/access.log; error_log /var/log/nginx/myapps/logs/error.log; root /var/www/html/myapps/public; location / { index index.html index.htm index.php; } location = /favicon.ico { return 204; access_log off; log_not_found off; } # location ~ \.php$ { # try_files $uri /index.php; # include /etc/nginx/fastcgi_params; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_param SCRIPT_NAME $fastcgi_script_name; location ~ \.php.*$ { rewrite ^(.*.php)/ $1 last; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_intercept_errors on; # fastcgi_param SCRIPT_FILENAME $document_root/index.php; # fastcgi_param PATH_INFO $uri; # fastcgi_pass 127.0.0.1:9000; # include fastcgi_params; } } We have a custom apps that we created that works great with lighttpd. I went through some headache also when we were trying to figure out how to make it work with lighttpd. this is the line that helps make it work in lighttpd. url.rewrite-once = ( ".*\?(.*)$" => "/index.php?$1", "^/js/.*$" => "$0", "^.*\.(js|ico|gif|jpg|png|css|swf |jar|class)$" => "$0", "" => "/index.php" ) but I couldn't figure out how to make it works in NginX. The webserver run just fine when we use the phpinfo.php test file. However as soon as I point it to my apps, nothing comes up. Check the error.log file and there's no error. Very mind boggling. I spent over 1 week trying to figure it out with no luck.. Please help?

  Read the article

• IIS URL Rewrite HTTP to HTTPS with Port

  - by Andy Arismendi

  My website has two bindings: 1000 and 1443 (port 80/443 are in use by another website on the same IIS instance). Port 1000 is HTTP, port 1443 is HTTPS. What I want to do is redirect any incoming request using "htt p://server:1000" to "htt ps://server:1443". I'm playing around with IIS 7 rewrite module 2.0 but I'm banging my head against the wall. Any insight is appreciated! BTW the rewrite configuration below works great with a site that has an HTTP binding on port 80 and HTTPS binding on port 443, but it doesn't work with my ports. P.S. My URLs intentionally have spaces because the 'spam prevention mechanism' kicked in. For some reason google login doesn't work anymore so I had to create an OpenID account (No Script could be the culprit). I'm not sure how to get XML to display nicely so I added spaces after the opening brackets. < ?xml version="1.0" encoding="utf-8"? < configuration < system.webServer < rewrite < rules < rule name="HTTP to HTTPS redirect" stopProcessing="true" < match url="(.*)" / < conditions trackAllCaptures="true" < add input="{HTTPS}" pattern="off" / < /conditions < action type="Redirect" redirectType="Found" url="htt ps: // {HTTP_HOST}/{R:1}" / < /rule < /rules < /rewrite < /system.webServer < /configuration

  Read the article

• Suggestions for SOHO networking gear

  - by jakemcgraw

  I'm a software developer in my day to day job but have landed a contract position to spec out and install the computer equipment for a small office. Ease of use (easy installation, low maintenance and good support) is priority number one, it supersedes price by a wide margin. The installation we had in mind would support up to ten workstations. I was originally going to go with Netgear hardware for firewall, switch duties: Firewall: NETGEAR UTM25-100NAS Switch:NETGEAR GS724T but have been told Sonicwall firewalls are easier to configure. So, sysadmins, if ease of use was priority number one, what hardware would you purchase for firewall, switch duties?

  Read the article

• Remote SQL server connection failure

  - by Sevki

  I am trying to connect to my MSSQL server 2008 web instance and im failing horribly... i get the error 26 and before you jump on me i have done these Check the spelling of the SQL Server instance name that is specified in the connection string. Use the SQL Server Surface Area Configuration tool to enable SQL Server to accept remote connections over the TCP or named pipes protocols. For more information about the SQL Server Surface Area Configuration Tool, see Surface Area Configuration for Services and Connections. Make sure that you have configured the firewall on the server instance of SQL Server to open ports for SQL Server and the SQL Server Browser port (UDP 1434). Make sure that the SQL Server Browser service is started on the server. in addition to theese i have disabled the firewall completely and tried other ports nothing works the same credentials work on the server but not on the client. this is the exact error message A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider) Can anybody help?

  Read the article

• Hyper-V virtual machine can't be migrated to a specific host in the cluster

  - by Massimo

  I have a three-node Hyper-V cluster running on Windows Server 2008 R2 which is working quite flawlessly: there are no errors, live migration works, all hosts can and will happily run all virtual machines, and so on. But one specific virtual machinee is trying to make me go mad: it works on two nodes of the cluster, but not on the third one. Whenever I try to move the VM to that node, be it in a live migration or with the VM powered off, it always fails. In the event log of the host these events are logged: Source: Hyper-V-VMMS Event ID: 16300 Cannot load a virtual machine configuration: General access denied error (0x80070005) (Virtual machine ID <GUID>) Source: Hyper-V-VMMS Evend ID: 20100 The Virtual Machine Management Service failed to register the configuration for the virtual machine '<GUID>' at 'C:\ClusterStorage\<PATH>\<VM>': General access denied error (0x80070005) Source: Hyper-V-High-Availability Event ID: 21102 'Virtual Machine Configuration <VM>' failed to register the virtual machine with the virtual machine management service. All other VMs can be moved to/from the offending host, and the offending VM can be moved between the other two hosts. Also, this is not a storage problem, because there are other VMs in the same cluster volume, and the host has no troubles running them. What's going on here?

  Read the article

< Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297  | Next Page >