Search Results

Search found 10519 results on 421 pages for 'standard'.

Page 290/421 | < Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297  | Next Page >

• Video stutter when using external drive

  - by psion

  When using boxee to play video files off of an external western digital 1TB drive formatted NTFS, I notice a slight stutter in the video every 5-10 seconds. When using mplayer, it doesn't stutter as often, but it still stutters occasionally. If I play the video off of the local sata drive, it plays fine even in boxee. I use this computer as my HTPC and I just switched from windows to linux on it. In windows, I never had any sort of stutter playing movies from the drive. I am using the latest intel graphics drivers (for the intel GMA 950) root@eee-htpc:/home/htpc# grep wd /etc/mtab /dev/sdb1 /mnt/wd2 fuseblk rw,nosuid,nodev,allow_other,blksize=512 0 0 I notice that despite trying to use ntfs or ntfs-3g, ubuntu uses ntfs-fuse which I've heard is slower. /dev/sdb1: Timing buffered disk reads: 80 MB in 3.07 seconds = 26.08 MB/sec root@eee-htpc:/mnt/wd2# dd if=/dev/zero of=./120mb bs=1024 count=120000 root@eee-htpc:/mnt/wd2# time mv ./120mb /home/htpc real 0m2.095s user 0m0.016s sys 0m0.736s Even though fuse has a reputation for being slow, it should easily be fast enough for playing standard definition video files. So why the video stutter? edit: The issue seems to be overhead cpu usage from either playing off of a usb device or ntfs/fuse. Watching CPU usage with top, local files use 10-40% CPU. Watching the same video on the external formatted ntfs, it spikes to 170% (over 100% because of hyperthreading). To me it seems like it must be overhead from the fuse driver, though I don't know if it has more or less overhead than ntfs-3g. It's a EEEBox B202 that has an atom 270, so not exactly the most powerful out there. edit2: I believe the solution would be to use non-fuse drivers or different fuse drivers. so far I have not been able to. edit3: I've probably edited this more times than I should, but as an update I have upgraded ntfs drivers to ntfs-3g 2010.8.8 external FUSE 28 - Third Generation NTFS Driver using the following PPA - ppa:x3lectric/team-iquik-releases. When first opening a video file in boxee that's on ntfs there's still the same amount of lag. After a few minutes of video, the lag seems to go away and the cpu usage comes down to 10-40%. Every so often though, it begins to stutter again. Also, if I skip ahead/back in the file, it begins to stutter a lot.

  Read the article

• How to sort a ListView control by a column in Visual C#

  - by bconlon

  Microsoft provide an article of the same name (previously published as Q319401) and it shows a nice class 'ListViewColumnSorter ' for sorting a standard ListView when the user clicks the column header. This is very useful for String values, however for Numeric or DateTime data it gives odd results. E.g. 100 would come before 99 in an ascending sort as the string compare sees 1 < 9. So my challenge was to allow other types to be sorted. This turned out to be fairly simple as I just needed to create an inner class in ListViewColumnSorter which extends the .Net CaseInsensitiveComparer class, and then use this as the ObjectCompare member's type. Note: Ideally we would be able to use IComparer as the member's type, but the Compare method is not virtual in CaseInsensitiveComparer , so we have to create an exact type: public class ListViewColumnSorter : IComparer {     private CaseInsensitiveComparer ObjectCompare;     private MyComparer ObjectCompare;     ... rest of Microsofts class implementation... } Here is my private inner comparer class, note the 'new int Compare' as Compare is not virtual, and also note we pass the values to the base compare as the correct type (e.g. Decimal, DateTime) so they compare correctly: private class MyComparer : CaseInsensitiveComparer {     public new int Compare(object x, object y)     {         try         {             string s1 = x.ToString();             string s2 = y.ToString();               // check for a numeric column             decimal n1, n2 = 0;             if (Decimal.TryParse(s1, out n1) && Decimal.TryParse(s2, out n2))                 return base.Compare(n1, n2);             else             {                 // check for a date column                 DateTime d1, d2;                 if (DateTime.TryParse(s1, out d1) && DateTime.TryParse(s2, out d2))                     return base.Compare(d1, d2);             }         }         catch (ArgumentException) { }           // just use base string compare         return base.Compare(x, y);     } } You could extend this for other types, even custom classes as long as they support ICompare. Microsoft also have another article How to: Sort a GridView Column When a Header Is Clicked that shows this for WPF, which looks conceptually very similar. I need to test it out to see if it handles non-string types. #

  Read the article

• Monitoring Your Servers

  - by Grant Fritchey

  If you are the DBA in a large scale enterprise, you’re probably already monitoring your servers for up-time and performance. But if you work for a medium-sized business, a small shop, or even a one-man operation, chances are pretty good that you’re not doing that sort of monitoring. You know that you’re supposed to be doing it, but other things, more important at-the-moment things, keep getting in the way. After all, which is more important, some monitoring or backup testing?  Backup testing, of course. Monitoring is frequently one of those things that you do when can get around to it.  Well, as you can see at the right, I have your round tuit ready to go. What if I told you that you could get monitoring on your servers for up-time, job completion, performance, all the standard stuff? And what if I told you that you wouldn’t need to install and configure another server in your environment to get it done? And what if I told you that you’d be able to set up and customize your alerts so you could know if your server was offline or a drive was full? Almost nothing for you to do, and you’ll have a full-blown monitoring process. Sounds to good to be true doesn’t it? Well, it’s coming. We’re creating an online, remote, monitoring system here at Red Gate. You’ll be able to use our SQL Monitor tool (which you can see here, monitoring SQL Server Central in real time) to keep track of your systems, but without having to set up a server and a database for storing the information collected. Instead, we’re taking advantage of services available through the internet to enable collection and storage of this information remotely, off your systems. All you have to do is install a piece of software that will communicate between our service and your servers and you’ll be off and running. It’s that easy. Before you get too excited, let me break the news that this is the near future I’m talking about. We’re setting up the program and there’s a sign-up you can use to get in on the initial tests.

  Read the article

• Oracle BPM: Adding an attachment during the Human Task Initialization

  - by kyap

  Recently I had the requirement from a customer to instantiate a Human Task, which can accept a payload containing a binary attribute (base64) representing an actual document. According to the same requirement, this attribute should be shown as a hyperlink in the Worklist UI to the assignee(s), from which the assignees can download the document on the local machine for review. Multiple options have been leverage, but most required heavy customization.  In order to leverage as much as possible Oracle BPM out-of-the box functionalities, I decided to add this document as a readonly attachment. We can easily achieve this operation within Worklist Application, but it is a bit more challenging when we want to attach the document during the Human Task initialization.  After some investigations (on BPM 11g PS4FP and PS5), here's the way to go: 1. Create an asynchronous BPM process, and use this xsd to create 2 Business Objects FullPayload and PartialPayload : 2. Create 2 process variables 'vFullPayload' and 'vPartialPayload' using this Business Objects created above 3. Implement the Start Event with the initial Data Association, with an input argument using 'FullPayload' Business Object type 4. Drag in an User Task into the process. Implement the User Task as usual by using 'vPartialPayload' type as the input type and assign the task to your favorite tester (mine is jcooper) 5. Here's the main course - Start the Data Association and map the payload into 'execData' as follow: FROM TO  vFullPayload.attachment.mimetype  execData.attachment[1].mimeType  vFullPayload.attachment.filename  execData.attachment[1].name  bpmn:getDataObject('vFullPayload')/ns:attachment/ns:content  execData.attachment[1].content  'BPM'  execData.attachment[1].attachmentScope false()  execData.attachment[1].doesBelongToParent 'weblogic'  execData.attachment[1].updateBy  xp20:current-dateTime()  execData.attachment[1].updateDate (Note: Check the <Humantask>WorkflowTask.xsd file in your project xsd folder to discover the different options for attachmentScope & storageType) 6. Your process is completed. Just build a standard ADF UI and deploy the process/UI onto your BPM Server for the testing. Here's an example, with a base64 encoded pdf file: application-pdf.txt 7. Finally, go to the BPM Worklist application to check the result ! Please note that Oracle BPM, by default, limits the attachment document size to 2Mb. If you are planning to have bigger attachments in your process, it is recommended to store your documents in a Content Management server (such as Oracle UCM) and pass the reference instead. It is possible to configure Oracle BPM to store attachment directly into Oracle UCM too, and I believe we can use the storageType, ucmMetadataItem attributes for this purpose.... I will confirm once I have access onto an Oracle UCM for the testing :)

  Read the article

• 3rd Party Tools: dbForge Studio for SQL Server

  - by Greg Low

  I've been taking a look at some of the 3rd party tools for SQL Server. Today, I looked at DBForge Studio for SQL Server from the team at DevArt. Installation was smooth. I did find it odd that it defaults to SQL authentication, not to Windows but either works fine. I like the way they have followed the SQL Server Management Studio visual layout. That will make the product familiar to existing SQL Server Management Studio users. I was keen to see what the database diagram tools are like. I found that the layouts generated where quite good, and certainly superior to the built-in SQL Server ones in SSMS. I didn't find any easy way to just add all tables to the diagram though. (That might just be me). One thing I did like was that it doesn't get confused when you have role playing dimensions. Multiple foreign key relationships between two tables display sensibly, unlike with the standard SQL Server version. It was pleasing to see a printing option in the diagramming tool. I found the database comparison tool worked quite well. There are a few UI things that surprised me (like when you add a new connection to a database, it doesn't select the one you just added by default) but generally it just worked as advertised, and the code that was generated looked ok. I used the SQL query editor and found the code formatting to be quite fast and while I didn't mind the style that it used by default, it wasn't obvious to me how to change the format. In Tools/Options I found things that talked about Profiles but I wasn't sure if that's what I needed. The help file pointed me in the right direction and I created a new profile. It's a bit odd that when you create a new profile, that it doesn't put you straight into editing the profile. At first I didn't know what I'd done. But as soon as I chose to edit it, I found that a very good range of options were available. When entering SQL code, the code completion options are quick but even though they are quite complete, one of the real challenges is in making them useful. Note in the following that while the options shown are correct, none are actually helpful: The Query Profiler seemed to work quite well. I keep wondering when the version supplied with SQL Server will ever have options like finding the most expensive operators, etc. Now that it's deprecated, perhaps never but it's great to see the third party options like this one and like SQL Sentry's Plan Explorer having this functionality. I didn't do much with the reporting options as I use SQL Server Reporting Services. Overall, I was quite impressed with this product and given they have a free trial available, I think it's worth your time taking a look at it.

  Read the article

• A big flat text file or a HTML site for language documentation?

  - by Bad Sector

  A project of mine is a small embeddable Tcl-like scripting language, LIL. While i'm mostly making it for my own use, i think it is interesting enough for others to use, so i want it to have a nice (but not very "wordy") documentation. So far i'm using a single flat readme.txt file. It explains the language's syntax, features, standard functions, how to use the C API, etc. Also it is easy to scan and read in almost every environment out there, from basic text-only terminals to full-fledged high-end graphical desktop environments. However, while i tried to keep things nicely formatted (as much as this is possible in plain text), i still think that being a big (and growing) wall of text, it isn't as easy on the eyes as it could be. Also i feel that sometimes i'm not writing as much as i want in order to avoid expanding the text too much. So i thought i could use another project of mine, QuHelp, which is basically a help site generator for sites like this one with a sidebar that provides a tree of topics/subtopics and offline full text search. With this i can use HTML to format the documentation and if i use QuHelp for some other project that uses LIL, i can import LIL's documentation as part of the other project's documentation. However converting the existing documentation to QuHelp/HTML isn't a small task, especially when it comes to functions (i'll need to put more detail on them than what currently exists in the readme.txt file). Also it loses the wide range of availability that it currently has (even if QuHelp's generated code degrades gracefully down to console-only web browsers, plain text is readable from everywhere, including from popular editors such as Vim and Emacs - i had someone once telling me that he likes LIL's documentation because it is readable without leaving his editor). So, my question is simply this: should i keep the documentation as it is now in the form of a single readme.txt file or should i convert it to something like the site i mentioned above? There is also the option to do both, but i'm not sure if i'll be able to always keep them in sync or if it is worth the effort. After asking around in IRC i've got mixed answers: some liked the wide availability of the single text file, others said that it is looks as bad as a man page (personally i don't mind that - i can read man pages just fine - but other people might have issues reading them). What do you think?

  Read the article

• Announcing the New Virtual Briefing Center

  - by Theresa Hickman

  Do you want to hear about real-world customer success stories? Or listen to Oracle Application leaders discuss the value in the latest releases of Oracle Application products? Do you want one place to download up-to-date content, including white papers, podcasts, webcasts and presentations? Did you miss the Virtual Trade Show at the beginning of 2011? If you answered yes to any of these questions, then the Virtual Briefing Center is the place to get up-to-date Oracle product information for Oracle E-Business Suite, PeopleSoft, JD Edwards, Fusion, Siebel and Hyperion across multiple product areas from financials, procurement, supply chain, CRM, Performance Management, and more. Every month we will have "Monthly Spotlights" to showcase new content. The following lists the upcoming live webcasts in July 2011: Weds. July 6, 2011 at 9:00 a.m. PST/12:00 p.m. EST: Hear about Amway’s upgrade to Oracle E-Business Suite 12.1 and how they stabilized financial modules, especially the month-end close processes. Thurs. July 14, 2011 at 9:00 a.m. PST/12:00 p.m. EST: Hear West Corporation share their PeopleSoft 9.1 upgrade, resulting in improved self-service, more robust reporting capabilities and new workflow and processes. Thurs. July 21, 2011 at 9:00 a.m. PST/12:00 p.m. EST: Learn how MFlex improved their operations, saved manpower and reduced time to close with their upgrade to JD Edwards EnterpriseOne 9.0. Thurs. July 28, 2011 at 9:00 a.m. PST/12:00 p.m. EST: IEEE discusses their upgrade to Siebel 8.1 using open web service architecture for faster SOA enablement allowing them to scale their membership capacity by 250%. If you cannot attend any of the above live events, that's OK because each of the webcasts in this series will be recorded and available on demand. And for you Financials folks who may have missed the webcasts from the Virtual Trade Show earlier this year, you can view them on demand by Visiting the Resource Library: Planning Your Successful Upgrade to Oracle E-Business Suite Financials 12.1. In this session, Bryant and Stratton College talk about their upgrade. Planning Your Successful Upgrade to PeopleSoft Financials 9.1. In this session, the University of Central Florida share their upgrade story. Fusion Financials: The New Standard for Finance. In this session, Terrance Wampler, the VP of Financial Application Strategy discusses the business value of Oracle's next generation financial applications and how customers can take advantage of Fusion Financials alongside their existing investments. What are you waiting for? Register now!

  Read the article

• Windows Azure Recipe: High Performance Computing

  - by Clint Edmonson

  One of the most attractive ways to use a cloud platform is for parallel processing. Commonly known as high-performance computing (HPC), this approach relies on executing code on many machines at the same time. On Windows Azure, this means running many role instances simultaneously, all working in parallel to solve some problem. Doing this requires some way to schedule applications, which means distributing their work across these instances. To allow this, Windows Azure provides the HPC Scheduler. This service can work with HPC applications built to use the industry-standard Message Passing Interface (MPI). Software that does finite element analysis, such as car crash simulations, is one example of this type of application, and there are many others. The HPC Scheduler can also be used with so-called embarrassingly parallel applications, such as Monte Carlo simulations. Whatever problem is addressed, the value this component provides is the same: It handles the complex problem of scheduling parallel computing work across many Windows Azure worker role instances. Drivers Elastic compute and storage resources Cost avoidance Solution Here’s a sketch of a solution using our Windows Azure HPC SDK: Ingredients Web Role – this hosts a HPC scheduler web portal to allow web based job submission and management. It also exposes an HTTP web service API to allow other tools (including Visual Studio) to post jobs as well. Worker Role – typically multiple worker roles are enlisted, including at least one head node that schedules jobs to be run among the remaining compute nodes. Database – stores state information about the job queue and resource configuration for the solution. Blobs, Tables, Queues, Caching (optional) – many parallel algorithms persist intermediate and/or permanent data as a result of their processing. These fast, highly reliable, parallelizable storage options are all available to all the jobs being processed. Training Here is a link to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure HPC Scheduler (3 labs)  The Windows Azure HPC Scheduler includes modules and features that enable you to launch and manage high-performance computing (HPC) applications and other parallel workloads within a Windows Azure service. The scheduler supports parallel computational tasks such as parametric sweeps, Message Passing Interface (MPI) processes, and service-oriented architecture (SOA) requests across your computing resources in Windows Azure. With the Windows Azure HPC Scheduler SDK, developers can create Windows Azure deployments that support scalable, compute-intensive, parallel applications. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• MS Tech Ed 2011 Coming Soon

  - by sonam

  Microsoft Tech ed 2010 was a great success. Infact  Most of such conferences always provide a great place to meet other  technology enthusiasts and ofcourse,whats in the pipeline for future products of a company or field.. And yet again,MS Tech ed India is coming on 23-25 march  in Banglore,India.Well,the place is  ofcourse right suited for any IT/Computing conference.After all,Its Silicon Valley of India.. From Last year.I remember  a session by Harish about  “Building pure client side apps with  Jquery and Microsoft Ajax .” Here’s the video: http://live.viasilverlight.com/TechEdOnDemand/Breakouts/TheWebSimplified1/Session4/AjaxClientSideApps.wmv At that time only,I got to know that jquery is so easy to use for  ajax or client side templating.Though I prefer jquery over  Microsoft Ajax many folds.UpdatePanel  is Dead for sure in my view. I believe,Web forms will be dead sooner or later with ASP.Net  MVC  gaining share many folds.(TODO:Learn MVC). The new standard is surely:JQUERY . Between,Last years videos and ppt’s  are available to browse and download: http://microsoftteched.in/2010/downloads.aspx After going through Tech Ad 2011 session agendas : http://www.microsoft.com/india/teched2011/agenda.aspx Few of my personal choices to watch would be: Day 1: a) Identity And Access Control in the Cloud        b)Windows 7 at  Home:Digitizing your Home.(Sounds cool.)        c) And ofcourse,Jquery and MS ajax(Lets see if MS can do something that’s not already happening with their version Of Ajax).. Day 2:  a) Lap Around Silverlight 5 and Html 5 as I have heard some hot talks that html5 will kill Silverlight,(I don’t see it in near future though).        b) Html 5 more than “Html 5”…Google will be seeing this one. Day3: a) Cross Browser applications in Azure       b)VS 2010 sessions of automated testing azure apps etc. Windows Phone 7 sessions will surely be of more interest now after MS-Nokia Deal. Though,Personally,I would want atleast some worth of  sessions on MS  future in Robotics,AI.Perhaps  I am looking at wrong place..(When is PDC?) And Since,Bill Gates  consider Robotics as the next big thing, Refer  this one : http://www.cs.virginia.edu/robins/A_Robot_in_Every_Home.pdf  I am sure,they wont loose this new hot spot to competitors,  like how google rules in Online  Search now.Robotics and AI will surely provide a big battlefield  for future.See,What IBM is doing with IBM Watson. OR see this, http://www.sciencedaily.com/releases/2011/02/110218083711.htm this is cool only if you can control your mind.Atleast,I’ll prefer regular driving (I would devote my mind seeing  people,places which we see on road).thats what jouney makes “cool”.:P.

  Read the article

• Connect to QuickBooks from PowerBuilder using RSSBus ADO.NET Data Provider

  - by dataintegration

  The RSSBus ADO.NET providers are easy-to-use, standards based controls that can be used from any platform or development technology that supports Microsoft .NET, including Sybase PowerBuilder. In this article we show how to use the RSSBus ADO.NET Provider for QuickBooks in PowerBuilder. A similar approach can be used from PowerBuilder with other RSSBus ADO.NET Data Providers to access data from Salesforce, SharePoint, Dynamics CRM, Google, OData, etc. In this article we will show how to create a basic PowerBuilder application that performs CRUD operations using the RSSBus ADO.NET Provider for QuickBooks. Step 1: Open PowerBuilder and create a new WPF Window Application solution. Step 2: Add all the Visual Controls needed for the connection properties. Step 3: Add the DataGrid control from the .NET controls. Step 4:Configure the columns of the DataGrid control as shown below. The column bindings will depend on the table. <DataGrid AutoGenerateColumns="False" Margin="13,249,12,14" Name="datagrid1" TabIndex="70" ItemsSource="{Binding}"> <DataGrid.Columns> <DataGridTextColumn x:Name="idColumn" Binding="{Binding Path=ID}" Header="ID" Width="SizeToHeader" /> <DataGridTextColumn x:Name="nameColumn" Binding="{Binding Path=Name}" Header="Name" Width="SizeToHeader" /> ... </DataGrid.Columns> </DataGrid> Step 5:Add a reference to the RSSBus ADO.NET Provider for QuickBooks assembly. Step 6:Optional: Set the QBXML Version to 6. Some of the tables in QuickBooks require a later version of QuickBooks to support updates and deletes. Please check the help for details. Connect the DataGrid: Once the visual elements have been configured, developers can use standard ADO.NET objects like Connection, Command, and DataAdapter to populate a DataTable with the results of a SQL query: System.Data.RSSBus.QuickBooks.QuickBooksConnection conn conn = create System.Data.RSSBus.QuickBooks.QuickBooksConnection(connectionString) System.Data.RSSBus.QuickBooks.QuickBooksCommand comm comm = create System.Data.RSSBus.QuickBooks.QuickBooksCommand(command, conn) System.Data.DataTable table table = create System.Data.DataTable System.Data.RSSBus.QuickBooks.QuickBooksDataAdapter dataAdapter dataAdapter = create System.Data.RSSBus.QuickBooks.QuickBooksDataAdapter(comm) dataAdapter.Fill(table) datagrid1.ItemsSource=table.DefaultView The code above can be used to bind data from any query (set this in command), to the DataGrid. The DataGrid should have the same columns as those returned from the SELECT statement. PowerBuilder Sample Project The included sample project includes the steps outlined in this article. You will also need the QuickBooks ADO.NET Data Provider to make the connection. You can download a free trial here.

  Read the article

• Using ext4 in VMware machine

  First of all, using a journaling filesystems like NTFS, ext4, XFS, or JFS (not to name all of them) is a very good idea and nowadays unthinkable not to do. Linux offers a good variety of different option as journaling filesystem for your system. Since years I am using SGI's XFS and I am pretty confident with stability, performance and liability of the system. In earlier years I had to struggle with incompatibilities between XFS and the boot loader. Using an ext2 formatted /boot solved this issue. But, wow, that is ages ago! Lately, I had to setup a fresh Lucid Lynx (Ubuntu 10.04 LTS) system for a change of our internal groupware / messaging system. Therefore, I fired up a new virtual machine with almost standard configuration in VMware Server and run through our network-based PXE boot and installation procedure. At a certain step in this process, Ubuntu asks you about the partitioning of your hard drive(s). Honestly, I have to say that only out of curiousity I sticked to the "default" suggestion and gave my faith and trust into the Ubuntu installation routine... Resulting to have an ext4 based root mount point ( / ). The rest of the installation went on without further concerns or worries. Note:I really can't remember why I chose to go away from my favourite... Well, it should turn out to be the wrong decision after all. Ok, let's continue the story about ext4 in a VMware based virtual machine. After some hours installing additional packages and configuring the new system using LDAP for general authentication and login, I had an "out-of-the-box" usable enterprise messaging system based on Zarafa 6.40 Community Edition inclusive proper SSL-based Webaccess interface and Z-Push extension for ActiveSync with my Nokia mobile. Straightforward and pretty nice for the time spent on the setup. Having priority on other tasks I let the system just running and didn't pay any further attention at all. Until I run into an upgrade of "Mail for Exchange" on Symbian OS. My mobile did not bother me at all with the upgrade and everything went smooth, but trying to re-establish the ActiveSync connection to the Zarafa messaging system resulted in a frustating situation. So, I shifted my focus back to the Linux system and I was amazed to figure out that the root had been remounted readonly due to hard drive failures or at least ext4 reported errors. Firing up Google only confirmed my concerns and it seems that using ext4 for VMware based virtual machines does not look like a stable and reliable candidate to me. You might consider reading those external resources: ext4 fs corruption under VMWare Server 2.01Bug #389555 - ext4 filesystem corruption Well, I learned my lesson and ext{2|3|4} based filesystems are not going to be used on any of my Linux systems or customer installations in the future. Addendum: I did not try this setup in other virtualization environments like VirtualBox, qemu, kvm, Xen, etc.

  Read the article

• Access forbidden 403 error in xampp

  - by Ramvignesh

  I am very new to xampp. I have made a fresh xampp install with the following commands. sudo su cd /tmp wget bit.ly/1cmyrUo -O xampp-32bit.run chmod 777 ./xampp-32bit.run sudo ./xampp-32bit.run Then I made a perl file to check whether my xampp works. The following is my sample.pl file content. #!usr/bin/perl print "content-type:text/html\n"; print(header()); use CGI qw(:standard); print(start_html()); print "Hello. I am ram"; print(end_html()); After copying my perl file from /home/vicky/desktop to /opt/lampp/cgi-bin. I started my xampp with the following command. /opt/lampp/lampp start Then I ran my sample.pl in the localhost with the help of the http://localhost/cgi-bin/sample.pl in my mozilla browser. I just got the following window. I found only answers relating to the 'new security concept error' and 'accessing virtual host issue'. I did came across an askubuntu query, a bid similar to that of mine. It had no answers but some comments. One comment suggested to change the file permissions. It directed to get help from here. It said to change the directory permission as 755 and file permission as 644 to resolve this kind of issue. When I tried to do that, I came to know that my cgi-bin directory already had 755 permission and my sample.pl had 644 permission. I have no solutions now. PostScript: I have attached the content of my /opt/lampp/apache2/conf/httpd.conf file. Hope this will help the answer-providers to understand my problem completely. Alias /bitnami/ "/opt/lampp/apache2/htdocs/" Alias /bitnami "/opt/lampp/apache2/htdocs" <Directory "/opt/lampp/apache2/htdocs"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory>

  Read the article

• Development-led security vs administration-led security in a software product?

  - by haylem

  There are cases where you have the opportunity, as a developer, to enforce stricter security features and protections on a software, though they could very well be managed at an environmental level (ie, the operating system would take care of it). Where would you say you draw the line, and what elements do you factor in your decision? Concrete Examples User Management is the OS's responsibility Not exactly meant as a security feature, but in a similar case Google Chrome used to not allow separate profiles. The invoked reason (though it now supports multiple profiles for a same OS user) used to be that user management was the operating system's responsibility. Disabling Web-Form Fields A recurrent request I see addressed online is to have auto-completion be disabled on form fields. Auto-completion didn't exist in old browsers, and was a welcome feature at the time it was introduced for people who needed to fill in forms often. But it also brought in some security concerns, and so some browsers started to implement, on top of the (obviously needed) setting in their own preference/customization panel, an autocomplete attribute for form or input fields. And this has now been introduced into the upcoming HTML5 standard. For browsers that do not listen to this attribute, strange hacks* are offered, like generating unique IDs and names for fields to avoid them from being suggested in future forms (which comes with another herd of issues, like polluting your local auto-fill cache and not preventing a password from being stored in it, but instead probably duplicating its occurences). In this particular case, and others, I'd argue that this is a user setting and that it's the user's desire and the user's responsibility to enable or disable auto-fill (by disabling the feature altogether). And if it is based on an internal policy and security requirement in a corporate environment, then substitute the user for the administrator in the above. I assume it could be counter-argued that the user may want to access non-critical applications (or sites) with this handy feature enabled, and critical applications with this feature disabled. But then I'd think that's what security zones are for (in some browsers), or the sign that you need a more secure (and dedicated) environment / account to use these applications. * I obviously don't deny the ingeniosity of the people who were forced to find workarounds, just the necessity of said workarounds. Questions That was a tad long-winded, so I guess my questions are: Would you in general consider it to be the application's (hence, the developer's) responsiblity? Where do you draw the line, if not in the "general" case?

  Read the article

• Is there a better term than "smoothness" or "granularity" to describe this language feature?

  - by Chris

  One of the best things about programming is the abundance of different languages. There are general purpose languages like C++ and Java, as well as little languages like XSLT and AWK. When comparing languages, people often use things like speed, power, expressiveness, and portability as the important distinguishing features. There is one characteristic of languages I consider to be important that, so far, I haven't heard [or been able to come up with] a good term for: how well a language scales from writing tiny programs to writing huge programs. Some languages make it easy and painless to write programs that only require a few lines of code, e.g. task automation. But those languages often don't have enough power to solve large problems, e.g. GUI programming. Conversely, languages that are powerful enough for big problems often require far too much overhead for small problems. This characteristic is important because problems that look small at first frequently grow in scope in unexpected ways. If a programmer chooses a language appropriate only for small tasks, scope changes can require rewriting code from scratch in a new language. And if the programmer chooses a language with lots of overhead and friction to solve a problem that stays small, it will be harder for other people to use and understand than necessary. Rewriting code that works fine is the single most wasteful thing a programmer can do with their time, but using a bazooka to kill a mosquito instead of a flyswatter isn't good either. Here are some of the ways this characteristic presents itself. Can be used interactively - there is some environment where programmers can enter commands one by one Requires no more than one file - neither project files nor makefiles are required for running in batch mode Can easily split code across multiple files - files can refeence each other, or there is some support for modules Has good support for data structures - supports structures like arrays, lists, and especially classes Supports a wide variety of features - features like networking, serialization, XML, and database connectivity are supported by standard libraries Here's my take on how C#, Python, and shell scripting measure up. Python scores highest. Feature C# Python shell scripting --------------- --------- --------- --------------- Interactive poor strong strong One file poor strong strong Multiple files strong strong moderate Data structures strong strong poor Features strong strong strong Is there a term that captures this idea? If not, what term should I use? Here are some candidates. Scalability - already used to decribe language performance, so it's not a good idea to overload it in the context of language syntax Granularity - expresses the idea of being good just for big tasks versus being good for big and small tasks, but doesn't express anything about data structures Smoothness - expresses the idea of low friction, but doesn't express anything about strength of data structures or features Note: Some of these properties are more correctly described as belonging to a compiler or IDE than the language itself. Please consider these tools collectively as the language environment. My question is about how easy or difficult languages are to use, which depends on the environment as well as the language.

  Read the article

• SharePoint 2010 Hosting :: Sending SMS Alerts in SharePoint 2010 Over Office Mobile Service Protocol (OMS)

  - by mbridge

  In this post, I want to share the exciting news of SharePoint's 2010 new feature. Finally it's possible to send SMS directly from SharePoint to mobile phones. The advantages of sending SMS instead of Email messages are obvious: SMS alerts or reminders that are received on mobile phones are more preferred than Email messages that can be lost in the mass of spam. The interface is standard as it's very similar to previous versions of the product. Adjustments are easy to do, simply enter the address of the Office Mobile Service (OMS) web-service which you want to use for sending messages, then specify the connection parameters. Further details on Office Mobile Service is available below. The Test Service button checks if OMS web-service is accessible using provided URL (user name and password are not verified). This check is needed because OMS web-service URL depends on the mobile operator and country. It's now possible to select the method of sending alerts in alerts settings. Email option is selected by default. Alerts delivery method is displayed in the list of existing alerts. Office Mobile Service (OMS) SharePoint 2010 uses exterior servers similar to SMTP servers for sending SMS alerts. However, Microsoft started development and promotion of their own protocol instead of using existing ones. That is how Office Mobile Service (OMS) appeared. This open protocol enables clients to send text and multimedia messages (mobile messages) remotely to the server which processes these messages and delivers them to mobile phones.  Typical scenario of utilizing this protocol is data transfer between computer application and mobile phone. The recipient can answer messages and the server in return will deliver the answer by SMTP protocol, i.e. by email.  Key quality of this protocol is that it's built on base of HTPP(S) and SOAP protocols.     This means that in fact SMS gateway must support typified web-service. What do you get from web-service? What you get is the ability to send SMS from any platform you want.  The protocol is being developed at the moment and version 0.2 from 08/28/2009 was available when the article was published.  For promotion of their protocol and simplifying server search, Microsoft represented web-service http://messaging.office.microsoft.com/HostingProviders.aspx that helps to receive the list of providers, which supports OMS protocol and message delivery to your operator.  All you need to do is decide which provider to use, complete the agreement, then adjust the SharePoint connection parameters and start working.  Some providers advertise themselves not only for clients but for mobile operators as well. They offer automatic adding to the list of the Office Mobile Service Providers.  To view the full specifications of OMS, please go to http://msdn.microsoft.com/en-us/library/dd774103.aspx.

  Read the article

• Dynamic character animation - Using the physics engine or not

  - by Lex Webb

  I'm planning on building a dynamic reactant animation engine for the characters in my 2D Game. I have already built templates for a skeleton based animation system using key frames and interpolation to specify a limbs position at any given moment in time. I am using Farseer physics (an extension of Box2D) in Monogame/XNA in C# My real question lies in how i go about tying this character animation into the physics engine. I have two options: Moving limbs using physics engine - applying a interpolated force to each limb (dynamic body) in order to attempt to get it to its position as donated by the skeleton animation. Moving limbs by simply changing the position of a fixed body - Updating the new position of each limb manually, attempting to take into account physics collisions. Then stepping the physics after the animation to allow for environment interaction. Each of these methods have their distinct advantages and disadvantages. Physics based movement Advantages: Possibly more natural/realistic movement Better interaction with game objects as force applying to objects colliding with characters would be calculated for me. No need to convert to dynamic bodies when reacting to projectiles/death/fighting. Disadvantages: Possible difficulty in calculating correct amount of force to move a limb a certain distance at a constant rate. Underlying character balance system would need to be created that would need to be robust enough to prevent characters falling over at the touch of a feather. Added code complexity and processing time for the above. Static Object movement Advantages: Easy to interpolate movement of limbs between game steps Moving limbs is as simple as applying a rotation to the skeleton bone. Greater control over limbs, wont need to worry about characters falling over as all animation would be pre-defined. Disadvantages: Possible unnatural movement (Depends entirely on my animation skills!) Bad physics collision reactions with physics engine (Dynamic bodies simply slide out of the way of static objects) Need to calculate collisions with physics objects and my limbs myself and apply directional forces to them. Hard to account for slopes/stairs/non standard planes when animating walking/running animations. Need to convert objects to dynamic when reacting to projectile/fighting/death physics objects. The Question! As you can see, i have thought about this extensively, i have also had Google into physics based animation and have found mostly dissertation papers! Which is filling me with sense that it may a lot more advanced than my mathematics skills. My question is mostly subjective based on my findings above/any experience you may have: Which of the above methods should i use when creating my game? I am willing to spend the time to get a physics solution working if you think it would be possible. In the end i want to provide the most satisfying experience for the gamer, as well as a robust and dynamic system i can use to animate pretty much anything i need.

  Read the article

• ArchBeat Link-o-Rama for November 8, 2012

  - by Bob Rhubart

  Webcast: Meeting Customer Expectations in the New Age of Retail Keep your eye on this live webcast as Sanjeev Sharma (Principal Product Director, Oracle Exalogic), Kelly Goetsch (Senior Principal Product Manager, Oracle Commerce), and Dan Conway (Senior Product Manager, Oracle Retail) offer real-world examples of business value derived by running customer-facing applications on Oracle Engineered Systems. Live, Thursday Nov 8, 10am PT/ 1pm ET. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." — Irving Wladawsky-Berger SOA Still Not Dead: Ratification of Governance Standard Highlights SOA’s Continued Relevance So just about the time I dig into Google Trends to learn that the conversation about governance peaked in 2004, along comes all this InfoQ article by Richard Seroter. And of course you've already listened to the OTN Archbeat Podcast about governance, right? Right? Implications of Java 6 End of Public Updates for Oracle E-Business Suite Users | Steven Chan The short version is: "Nothing will change for EBS users after February 2013." According to Steven Chan, "EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6." You'll find additional information on Steven's blog. ADF Mobile Custom Javascript – iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. How Data and BPM are married to get the right information to the right people at the right time | Leon Smiers "Business Process Management…supports a large group of stakeholders within an organization, all with different needs," says Oracle ACE Leon Smiers. "End-to-end processes typically run across departments, stakeholders and applications, and can often have a long life-span. So how do organizations provide all stakeholders with the information they need?" Leon provides answers in this post. Thought for the Day "(When) asking skilled architects…what they do when confronted with highly complex problems…(they) would most likely answer, 'Just use Common Sense.' (A) better expression than 'common sense' is 'contextual sense' — a knowledge of what is reasonable within a given content. Practicing architects through eduction, experience and examples accumulate a considerable body of contextual sense by the time they're entrusted with solving a system-level problem…" — Eberhardt Rechtin (January 16, 1926 – April 14, 2006) Source: SoftwareQuotes.com

  Read the article

• Salt River Project Identifies US$500,000 in Cost Reduction Opportunities Through Unified IT Portfolio Management

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Salt River Project (SRP) includes two entities serving the Phoenix area: the Salt River Project Agricultural Improvement and Power District and the Salt River Valley Water Users’ Association. The SRP district operates various power plants and generating stations to provide electricity to nearly 956,000 retail customers. The SRP association maintains an extensive system of reservoirs, wells, and irrigation laterals to deliver nearly 1 million acre-feet of water annually. Salt River Project implemented Oracle’s Primavera Portfolio Management to unify management of its extensive IT portfolio, including essential utility systems, like work and asset management, as well as programming frameworks and development tools. With the system, SRP discovered almost US$500,000 in cost-reduction opportunities by identifying redundant or low use software, including 150 applications that are close to being unsupported. The company retired 10 applications in the last year and upgraded 34 systems. SRP also identified preferred technologies and ensured that more than 90% of applications are based on standard technologies—reducing procurement costs, simplifying maintenance support, and lowering total cost of ownership. Solutions: Provided approximately 70 users in the IT support group with detailed insight into the product lifecycle of each piece of IT infrastructure and software in the entire portfolio Discovered almost US$500,000 in cost reduction opportunities by identifying redundant or low use software that could be eliminated or migrated to alternative solutions Identified approximately 150 applications that are close to being unsupported and prioritized them to begin modernization Click here to view more Oracle Primavera Portfolio Management solutions for SRP. Why Oracle Salt River Project chose Oracle’s Primavera Portfolio Management after evaluating it against four other solutions. “Oracle’s Primavera Portfolio Management offered the most functionality to support our diverse needs,” said Eileen Ahles, IT portfolio manager, Salt River Project. Read the complete customer success story Access a list of all Primavera customer success stories

  Read the article

• Business Strategy - Google Case Study

  Business strategy defined by SMBTN.com is a term used in business planning that implies a careful selection and application of resources to obtain a competitive advantage in anticipation of future events or trends. In more general terms business strategy is positioning a company so that it has the greatest competitive advantage over others in the markets and industries that they participate in. This process involves making corporate decisions regarding which markets to provide goods and services, pricing, acceptable quality levels, and how to interact with others in the marketplace. The primary objective of business strategy is to create and increase value for all of its shareholders and stakeholders through the creation of customer value. According to InformationWeek.com, Google has a distinctive technology advantage over its competitors like Microsoft, eBay, Amazon, Yahoo. Google utilizes custom high-performance systems which are cost efficient because they can scale to extreme workloads. This hardware allows for a huge cost advantage over its competitors. In addition, InformationWeek.com interviewed Stephen Arnold who stated that Google’s programmers are 50%-100% more productive compared to programmers working for their competitors.  He based this theory on Google’s competitors having to spend up to four times as much just to keep up. In addition to Google’s technological advantage, they also have developed a decentralized management schema where employees report directly to multiple managers and team project leaders. This allows for the responsibility of the technology department to be shared amongst multiple senior level engineers and removes the need for a singular department head to oversee the activities of the department.  This is a unique approach from the standard management style. Typically a department head like a CIO or CTO would oversee the department’s global initiatives and business functionality.  This would then be passed down and administered through middle management and implemented by programmers, business analyst, network administrators and Database administrators. It goes without saying that an IT professional’s responsibilities would be directed by Google’s technological advantage and management strategy.  Simply because they work within the department, and would have to design, develop, and support the high-performance systems and would have to report multiple managers and project leaders on a regular basis. Since Google was established and driven by new and immerging technology, all other departments would be directly impacted by the technology department.  In fact, they would have to cater to the technology department since it is a huge driving for in the success of Google. Reference: http://www.smbtn.com/smallbusinessdictionary/#b http://www.informationweek.com/news/software/linux/showArticle.jhtml?articleID=192300292&pgno=1&queryText=&isPrev=

  Read the article

• Three Global Telecoms Soar With Siebel

  - by michael.seback

  Deutsche Telekom Group Selects Oracle's Siebel CRM to Underpin Next-Generation CRM Strategy The Deutsche Telekom Group (DTAG), one of the world's leading telecommunications companies, and a customer of Oracle since 2001, has invested in Oracle's Siebel CRM as the standard platform for its Next Generation CRM strategy; a move to lower the cost of managing its 120 million customers across its European businesses. Oracle's Siebel CRM is planned to be deployed in Germany and all of the company's European business within five years. "...Our Next-Generation strategy is a significant move to lower our operating costs and enhance customer service for all our European customers. Not only is Oracle underpinning this strategy, but is also shaping the way our company operates and sells to customers. We look forward to working with Oracle over the coming years as the technology is extended across Europe," said Dr. Steffen Roehn, CIO Deutsche Telekom AG... "The telecommunications industry is currently undergoing some major changes. As a result, companies like Deutsche Telekom are needing to be more intelligent about the way they use technology, particularly when it comes to customer service. Deutsche Telekom is a great example of how organisations can use CRM to not just improve services, but also drive more commercial opportunities through the ability to offer highly tailored offers, while the customer is engaged online or on the phone," said Steve Fearon, vice president CRM, EMEA Read more. Telecom Argentina S.A. Accelerates Time-to-Market for New Communications Products and Services Telecom Argentina S.A. offers basic telephone, urban landline, and national and international long-distance services...."With Oracle's Siebel CRM and Oracle Communication Billing and Revenue Management, we started a technological transformation that allows us to satisfy our critical business needs, such as improving customer service and quickly launching new phone and internet products and services." - Saba Gooley, Chief Information Officer, Wire Line and Internet Services, Telecom Argentina S.A.Read more. Türk Telekom Develops Benefits-Driven CRM Roadmap Türk Telekom Group provides integrated telecommunication services from public switched telephone network (PSTN) and global systems for mobile communications technology (GSM). to broadband internet...."Oracle Insight provided us with a structured deployment approach that makes sense for our business. It quantified the benefits of the CRM solution allowing us to engage with the relevant business owners; essential for a successful transformation program." - Paul Taylor, VP Commercial Transformation, Türk Telekom Read more.

  Read the article

• Spotlight on RIVA: CRM integration for Oracle CRM on Demand and Microsoft Exchange

  - by Richard Lefebvre

  Introducing Riva from Omni - an Oracle ISV partner specializing in Enterprise Management and Integration Solutions Riva delivers advanced, server-side integration for Oracle CRM On Demand and Microsoft Exchange or even Novell GroupWise. Riva allows Oracle customers to go beyond the standard Outlook plug-in to deliver additional value for the end user as they interact between Outlook and CRM On Demand. Riva syncs CRM On Demand to ALL Exchange mail apps, not just Windows Outlook.  So, whether customers are using Outlook 2010, Outlook Web Access (web client), Outlook 2011 for Mac, Apple Mail, Outlook on Citrix  or a mobile device, Riva's got them covered. There are no plug-ins to be installed, configured, managed and maintained on users' desktops, laptops as Riva delivers Server-side synchronisation for CRMOD and Exchange. The automation of CRM and Outlook integration will remove the reliance upon users to synchronise between the two with Riva handling this process. Riva allows administrators to define sync policies and apply them to individuals or groups of users depending on their sync requirements. Administrators will be able to determine and manage the exposure of the most pertinent detail to be synchronised between Outlook and CRM On Demand. Custom and organic contact filtering for large deployments i.e. Based on ownership, groupings and contact frequency, filters can be applied on what contact records are shared with the users. Riva provides the capability to synchronise CRM and Outlook beyond Contacts, Calendar entries and Email. The synchronisation can be extended to cater for  opportunities, quotes and custom objects for example within the Outlook interface. Riva SmartConvert Folders can automate the creation of opportunities and associated contacts for example if they don't already exist. This can facilitate a reduction in manual detail entry through quick association whilst also benefiting user adoption. From a mobile perspective, Riva allows users to view and manage their CRM On Demand contacts, calendar, tasks, opportunities and cases from iPad, iPhone, Android and BlackBerry devices.  Again, there are no mobile apps or additional plugins to install, configure or manage. We sync CRM On Demand to Exchange.  Because the mobile device is connected to an Exchange mailbox, the information automatically syncs down to the native address book, calendar and mail apps on the smartphone or tablet. Riva Datasheet for CRM On Demand Riva Brochure – Oracle CRM On Demand  Technical Knowledgebase & Riva Trial  http://kb.omni-ts.com/47/ Comparison to Outlook Plug-ins Riva Diagram – Riva Comparison with Outlook Plug-ins Contact: Wolfgang Berger - [email protected]

  Read the article

• Time passage arithmetic explanation

  - by Cyber Axe

  I ported this from http://www.effectgames.com/effect/article.psp.html/joe/Old_School_Color_Cycling_with_HTML5 some time ago. However i'm now wanting to modify it for the purpose of changing it from floating point to fixed point maths for enhanced efficiency (for those who are going to talk about premature optimization and what not, i want to have my entire engine in fixed point both as a learning process for me and so i can port code more easily to systems in the future that dont have native floating points such as arm cpus) My initial conversion to fixed points just resulted in the cycling stuck on either the first or last frame of cycling. Plus it would be nice to understand better how it works so i can add more options and so forth in the future, my maths however sucks and the comments are limited so i don't really know how the maths work for determining the frame it shoud use (cycleAmount) I was also a beginner when i ported it as i had no idea between floating points and integers and what not. So in summary my question is, can anyone give an explination of the arithmatic used for determining the cycleAmount (which determings the "frame" of the cycle) This is the working floating point maths version of the code: public final void cycle(Colour[] sourceColours, double timeNow, double speedAdjust) { // Cycle all animated colour ranges in palette based on timestamp. sourceColours = sourceColours.clone(); int cycleSize; double cycleRate; double cycleAmount; Cycle cycle; for (int i = 0, len = cycles.length; i < len; ++i) { cycle = cycles[i]; cycleSize = (cycle.HIGH - cycle.LOW) + 1; cycleRate = cycle.RATE / (int) (CYCLE_SPEED / speedAdjust); cycleAmount = 0; if (cycle.REVERSE < 3) { // Standard Cycle cycleAmount = DFLOAT_MOD((timeNow / (1000 / cycleRate)), cycleSize); if (cycle.REVERSE < 1) { cycleAmount = cycleSize - cycleAmount; // If below 1 make sure its not reversed. } } else if (cycle.REVERSE == 3) { // Ping-Pong cycleAmount = DFLOAT_MOD((timeNow / (1000 / cycleRate)), cycleSize << 1); if (cycleAmount >= cycleSize) { cycleAmount = (cycleSize * 2) - cycleAmount; } } else if (cycle.REVERSE < 6) { // Sine Wave cycleAmount = DFLOAT_MOD((timeNow / (1000 / cycleRate)), cycleSize); cycleAmount = Math.sin((cycleAmount * 3.1415926 * 2) / cycleSize) + 1; if (cycle.REVERSE == 4) { cycleAmount *= (cycleSize / 4); } else if (cycle.REVERSE == 5) { cycleAmount *= (cycleSize >> 1); } } if (cycle.REVERSE == 2) { reverseColours(sourceColours, cycle); } if (USE_BLEND_SHIFT) { blendShiftColours(sourceColours, cycle, cycleAmount); } else { shiftColours(sourceColours, cycle, cycleAmount); } if (cycle.REVERSE == 2) { reverseColours(sourceColours, cycle); } } colours = sourceColours; } // This utility function allows for variable precision floating point modulus. private double DFLOAT_MOD(final double d, final double b) { return (Math.floor(d * PRECISION) % Math.floor(b * PRECISION)) / PRECISION; }

  Read the article

• ArchBeat Link-o-Rama for 2012-08-28

  - by Bob Rhubart

  You may be tempted by IaaS, but you should PaaS on that or your database cloud journey will be a short one "The better option [to IaaS] is to rationalize the deployment stack so that VMs are needed only for exceptional cases," says B. R. Clouse. "By settling on a standard operating system and patch level, you create an infrastructure that potentially all of your databases can share. Now, the building block will be database instances or possibly schemas within databases. These components are the platforms on which you will deploy workloads, hence this is known as Platform as a Service (PaaS)." 'Shadow IT' can be the cloud's best friend | David Linthicum "I do not advocate that IT give up control and allow business units to adopt any old technology they want," says Infoworld cloud computing blogger David Linthicum. "However, IT needs to face reality: For the past three decades or so, corporate IT has been slow on the uptake around the use of productive new technologies." Do you agree? 9 ways cloud will impact IT employment | ZDNet ZDNet blogger Joe McKendrick condenses information from a recent report on how cloud computing will impact IT jobs. Number one on the list: New categories of jobs arising from cloud computing, which include "private cloud developers and administrators, departmental liaisons, integration specialists, cloud architects, and compliance specialists." Yeah, that's right, cloud architects. For more on cloud architects, including what you need to up your game to thrive in the cloud, check out "The Role of the Cloud Architect" on the OTN ArchBeat Podcast. Decisions, Decisions: The art, science, and politics of technology selection "When the time comes for a solution architect to make the final decision about the technologies, standards, and other elements that are to be incorporated into a particular project, what factors weigh most heavily on that decision? It comes as no surprise that among the architects I contacted, business needs top the list." Managing Oracle Exalogic Elastic Cloud with Oracle Enterprise Manager Ops Center Anand Akela's byline is on this post, but "Dr. Jürgen Fleischer, Oracle Enterprise Manager Ops Center Engineering" appears at the end of the post, so it's anybody's guess as to who wrote this thing. But the content includes a complete listing of the Exalogic 2.0.1 Tea Break Snippets series written by a member of the Exalogic team who goes by the name "The Old Toxophilist." So maybe the best thing to do here is ignore the names and focus on the very useful conent. Boost your infrastructure with Coherence into the Cloud | Nino Guarnacci Nino Guarnacci describes a use case that involved managing a variety of data caches that process complex queries and parallel computational operations, in order to maintain the caches in a consistent state on different server instances. Thought for the Day "No one hates software more than software developers." — Jeff Atwood Source: SoftwareQuotes

  Read the article

• Kicking off the ODI12c Blog Series

  - by Madhu Nair

  Normal 0 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4 It is always exciting to talk about a new release, especially one as significant as the newly released Oracle Data Integrator 12c (ODI12c). Why? Because it is packed with features that addresses many requirements for the user community. If you missed sneak previews at this year's Oracle Open World sessions, do not despair. Because over the coming weeks the ODI12c team of developers and consultants will be sharing their perspective on key features, experiences and best practices for ODI12c right here through a series of blogs. Before diving into feature details in subsequent blogs it helps to understand the overall themes that went into developing ODI12c. Let the Productivity Flow: Let us face it. Designing for developer user experience is always top of mind to any enterprise software. ODI12c addresses this through the introduction of declarative flow based mappings (the topic of our next ODI blog by the way!!). Reusability has been addressed though the introduction of reusable mappings cutting down development times for repeated logics. An enhanced debugger makes life easy for complex granular debugging scenarios. Unique repository IDs now allow you to manage multiple repositories. Performance is Paramount: Another major area of focus for ODI12c is performance. Increased parallelism (like the multiple target table load feature), reduced session overheads and ability to customize loads plans through physical views all empower the user to tune run times for extreme performances. mapping showing multiple target load physical representation allowing users to choose execution options Integrating it all: This release is not just about ODI12c as a standalone product. Closer integration with Oracle GoldenGate now brings Change Data Capture (CDC) capabilities into ODI12c. Oracle Warehouse Builder (OWB) jobs can now be executed and monitored from within ODI12c. And ODI12c is fast becoming the de facto standard for Oracle Applications that need data integration in their solutions. The best example being the latest release of the Oracle BI Applications technology. Even as we bring you in-depth write-ups about the features there are some great previews and resources that are already out there. Like this super entry by beta partner Rittman Mead Consulting and this ODI12c Key Features White Paper. You can download ODI12c here (this post helps). The best though is the upcoming Executive Webcast featuring customers and executives who have seen and conceived the product. Don’t miss it!

  Read the article

• Your interesting code tricks/ conventions? [closed]

  - by Paul

  What interesting conventions, rules, tricks do you use in your code? Preferably some that are not so popular so that the rest of us would find them as novelties. :) Here's some of mine... Input and output parameters This applies to C++ and other languages that have both references and pointers. This is the convention: input parameters are always passed by value or const reference; output parameters are always passed by pointer. This way I'm able to see at a glance, directly from the function call, what parameters might get modified by the function: Inspiration: Old C code int a = 6, b = 7, sum = 0; calculateSum(a, b, &sum); Ordering of headers My typical source file begins like this (see code below). The reason I put the matching header first is because, in case that header is not self-sufficient (I forgot to include some necessary library, or forgot to forward declare some type or function), a compiler error will occur. // Matching header #include "example.h" // Standard libraries #include <string> ... Setter functions Sometimes I find that I need to set multiple properties of an object all at once (like when I just constructed it and I need to initialize it). To reduce the amount of typing and, in some cases, improve readability, I decided to make my setters chainable: Inspiration: Builder pattern class Employee { public: Employee& name(const std::string& name); Employee& salary(double salary); private: std::string name_; double salary_; }; Employee bob; bob.name("William Smith").salary(500.00); Maybe in this particular case it could have been just as well done in the constructor. But for Real WorldTM applications, classes would have lots more fields that should be set to appropriate values and it becomes unmaintainable to do it in the constructor. So what about you? What personal tips and tricks would you like to share?

  Read the article

< Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297  | Next Page >