Search Results

Search found 13401 results on 537 pages for 'double checked'.

Page 291/537 | < Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >

• Windows detected a hard disk failure* - what should I do?

  - by bart

  I'm using Windows 7 x64 Ultimate, I'm getting windows error popups like this one for about 3 days, multiple times a day: This Samsung SpinPoint F3 HD502HJ 500 GB is about 2 years old and I already checked it with Samsung ES Tool 3.0, did all the scans (took hours) and everything is fine! I have no malware, viruses and this started to happen after I have had some electrcity issues at my house (multiple power surges / overvolatege during the night, PC was connected, but turned off), any ideas? What other test should I perform? I believe the disk could be damaged, but then diagnostic tools should prove this, right? *in fact "Windows detected hard disk problem" but I was unable to put word "problem" within the title as well.

  Read the article

• fedora13 mouse change -I Beam

  - by tom smith

  hi. sorry to have to ask such a basic question!! i've got fedora 13, trying to figure out how to change the "I Beam" pointer. earlier, i had a "thin" "I Beam" pointer in my gedit/term windows. now, I have a "thicker/shadow" kind of "I Beam" pointer when i move the mouse over the gedit/term windows. obviously, i've made some change, but i can't figure out what I changed, or where this attribute is set. i've checked google/irc, as well as looked through the "system-preferences-appearance" with no luck.. i saw the customize part of the gui, and could resize the "arrow" but nothing for the "I-Beam". this isn't critical, but it is anoying!! any thoughts/pointers would be helpful. thanks

  Read the article

• fedora13 mouse change -I Beam

  - by tom smith

  hi. sorry to have to ask such a basic question!! i've got fedora 13, trying to figure out how to change the "I Beam" pointer. earlier, i had a "thin" "I Beam" pointer in my gedit/term windows. now, I have a "thicker/shadow" kind of "I Beam" pointer when i move the mouse over the gedit/term windows. obviously, i've made some change, but i can't figure out what I changed, or where this attribute is set. i've checked google/irc, as well as looked through the "system-preferences-appearance" with no luck.. i saw the customize part of the gui, and could resize the "arrow" but nothing for the "I-Beam". this isn't critical, but it is anoying!! any thoughts/pointers would be helpful. thanks

  Read the article

• Prevent IIS7 HTTPS from binding to all SSL IP addresses

  - by robpaveza

  I've had this interesting problem with IIS7. I have a number of HTTPS sites in IIS7. That hasn't been a problem, until I wanted to go and set up VisualSVN Server using an SSL certificate. The installer had trouble starting the service. When I looked in the event log, the error was that "the file is already in use by another process." I figured that the "file" was really a socket, and checked with netstat - even though IIS was only bound to three specific IP addresses (.160, .156, and .168) with port 443, it was consuming *:443. I could stop the World Wide Web Publishing Service, start VisualSVN, and then start IIS, but then none of my SSL servers would start. Any helpful hints about how I could make IIS not try to default-bind to *:443? Thanks!!

  Read the article

• Server 2008 Active Directory DNS Entries Deleted. Dcdiag unable to contact local AD controller.

  - by Jim Smith

  I've never seen anything like this. At a potential customer site, I noticed that the PC's were all unable to locate the domain controller and netlogon was failing. I fixed the DNS entries on the client PC's so the AD server was DNS server and tried to rejoin the domain. The PC was unable to locate the domain controller. On the server, I checked the DNS settings and while there is the high level AD folder, every single entry related to Active Directory appears to have been completely deleted. There are no backups from what I can tell and this has been happening for 6 months at least. Does anyone have any recommendations for repairing this? Thanks.

  Read the article

• Very large log files in IIS 7.x

  - by Neal

  Hello, I had a site stop working today and when I RDP'd into the server I saw a warning about low disk space. The first thing I checked was the inetpub folder where the log files are stored and sure enough it was huge, 40 GB huge. I do clean the files monthly but what is causing a day's worth of logging on a medium activity site (www.vbdotnetforums.com) to create 300-500 MB log files? I do have everything being logged so my SmarterStats software gives me the most info, but are there specific things I should/can turn off that is causing the most growth in these log files? Also, sure would be nice if Microsoft someday had some sort of log file management such as deleting log files after they exceed a certain size (total), X days, etc. We all have to come up with some solution to delete the old ones manually. Thanks Neal

  Read the article

• JZ0SJ: Metadata accessor information was not found on this database.

  - by Anthony Kong

  The complete message is: (JZ0SJ: Metadata accessor information was not found on this database. Please install the required tables as mentioned in the jConnect documentation The server is Adaptive Server Enterprise/15.5/EBF 18380 SMP ESD#3/P/x86_64/Enterprise Linux/asear155/2531/64-bit/FBO/Fri Jan 14 07:04:05 2011 Google search does not turn up definite answer to the problem. A lof of result are rather dated too. I checked the documentation but it does not mention any tables. What is the root cause of this problem? At the very least I would like to see a list of the required tables somewhere?

  Read the article

• Visual Studio 2005 Open Project Dialog Slow as Molasses

  - by futureelite7

  Whenever I try to open a project in Visual Studio 2005 (Windows XP), my open project dialog become slow as molasses - navigating down one level of folders typically takes almost 60 seconds. Finding the project and opening it can take up 4-5 minutes, which is just ridiculous. I've checked the open project dialogs of other programs - only VS2005 is acting this way. What could be causing this problem and how do I go about solving it (apart from reinstalling VS2005 / windows) (Edit: Even VS2008 on the same machine does not have this problem. I don't know what's wrong.) Thanks!

  Read the article

• svn .xcodeproj conflict / transaction issue?

  - by Stephen Furlani

  Hello, I am trying to add my xcodeproj file/folder thingy to my svn repository. medwall-macmini-1:Summer2010 pebble$ svn add CoreDataTrial.xcodeproj A CoreDataTrial.xcodeproj A CoreDataTrial.xcodeproj/pebble.pbxuser A CoreDataTrial.xcodeproj/pebble.perspectivev3 A CoreDataTrial.xcodeproj/project.pbxproj A CoreDataTrial.xcodeproj/slate.mode1v3 A CoreDataTrial.xcodeproj/slate.mode2v3 A CoreDataTrial.xcodeproj/slate.pbxuser A CoreDataTrial.xcodeproj/slate.perspectivev3 medwall-macmini-1:Summer2010 pebble$ svn ci -m "Checked In" Adding CoreDataTrial.xcodeproj svn: Commit failed (details follow): svn: File already exists: filesystem '/SVN/Summer2010/db', transaction '21-p', path '/CoreDataTrial.xcodeproj' I then try to Delete it, Check-In, Update it, Add it, and then check it in again but I get the same exact run-around. What can I do to fix this? -Stephen

  Read the article

• Postfix smtp error 450 (failed to add recipient)

  - by culter

  I have debian server with postfix and roundcube. After an attack we are on 2 blacklists, but I don't think that this is the main problem. I can't send mail to any address. I tried to find the cause...I checked var/spool/postfix/etc/resolv.conf and resolv.etc and they're the same with this content: nameserver 127.0.0.1 nameserver localhost In var/log/mail.err I found: cyrus/imap[25452]: DBERROR: opening /var/lib/cyrus/user/m/[email protected]: cyrusdb error cyrus/imap[25452]: DBERROR: skiplist recovery /var/lib/cyrus/user/m/[email protected]: ADD at 1FC0 exists When I try to send email from roundcube, I get the message from title. When I send it within opera or any other mail client, It gives nothing, but email is'nt sended. Thank you for any advice.

  Read the article

• how to make run cron on OSX 10.6.2?

  - by Radek

  Note: this question is not about how to edit cron tab but how to make cron work I edited my cron using env EDITOR=joe crontab -e I entered 1 * * * * echo 'test' > /Users/radek/Backup/rationalvmware/test.txt and it does nothing although the cron is set up correctly. Checked via Cronnix and viewed the cron in /var/cron/tabs. Editing crontab using Cronnix gives me the same results. If I run echo 'test' > /Users/radek/Backup/rationalvmware/test.txt manually it creates a files as expected so I assume that the command I provide to cron is correct one. Is there anything special I have to do to make cron work on OSX? How can I check it the the cron is running. What's the equivalent of /var/log/messages on OSX? I can see in messages on SuSE that cron works.

  Read the article

• Where does Windows 8 put the exe of the default browser for Modern UI?

  - by avirk

  I was trying to some hack with Win-8 and I found something which is really gonna out my mind. When I set the default browser to the IE then its icon become Modern UI and I can't see the option Open file location at the bottom when I select it by right click. But if I don't set it default then it became a desktop version icon and show up the option when I select it. Same is for the Google Chrome when I checked it. IE icon when it is not set to default, I can see the option open file location. Google Chrome icon when it is set to default. Google Chrome of desktop version when it is set to default. So my question is where does Modern UI keep exe of the default browser? And why the default browser has Modern UI icon and non-default browser has desktop version icon.

  Read the article

• How not to send all traffic over SBS connection?

  - by Niels R.

  Hi, My girlfriend uses SBS Connection Manager to connect to her company's network. The problem is that the internet connection is überslow at work, so she wants to use the home internet connection to surf the web and use the SBS Connection to get to her work stuff. Normally with a VPN connection you just have to uncheck a box "Send all traffic over VPN connection" or "Use VPN as default gateway" or something like that. As I've never seen this SBS Connection Manager-thing before, I've no idea where to uncheck a similar box. (I've checked the properties of the connection in Network Connections, but it only has a few options about logging and firewall). Thanks for any help in advance! Kind regards, Niels R.

  Read the article

• Install Win7 on Dell XPS1730: CD Driver missing

  - by Mies75

  Vista crashed on my DELL XPS 1730 laptop. Again. I deleted the RAID array, created a new one and started to install Window 7 from DVD. During the initial phase of installation the setup pop ups this: Load Driver: A required CD/DVD device driver is missing... I can then insert other media to load the drivers, but it can't find any. I checked the DELL site for drivers but I can only find firmware for the drive. Which driver do I need, and where can I download it?

  Read the article

• Original sender is not correctly identified when spam is forwarded

  - by Stephan Burlot

  I have a forwarding rule with Postfix that forwards all messages to my main email address. When a spam message is sent to one of my emails, it is forwarded but the sender is shown as being the forwarding domain, not the spammer's domain. Real example: mywebsite.com is hosted on Linode. [email protected] sends an email to [email protected] the mail is forwarded to [email protected] my email hosting (anotherwebsite.com) sees it's spam and sends a message to [email protected] and Linode reports a TOS violation. I have modified my postfix settings so I now use RBL, but if a message goes through, it may happen again. How can I prevent this to happen again? Is there some settings to change on Postfix so the original sender is correctly identified? Thanks Stephan EDIT: The steps I did to prevent this to happen again are: Add RBL checking to Postfix Add postgrey to Postfix And finally fix the MX record which was incorrect. I checked with a test email on Spamcop.net and the original sender is correctly identified.

  Read the article

• ADFS 2.0 Farm - How do I perform an immediate sync

  - by Matt

  Hi, We're using ADFS 2.0 on a windows 2008 server, it's in a farm and has the default polling interval of 5 minutes. We're making a change tonight and would rather sync immediately than wait for the other guy to update, especially as we might be making multiple changes. This Technet article mentions that I can change the polling interval or do an immediate sync between my servers: http://technet.microsoft.com/en-us/library/ee913581%28WS.10%29.aspx I checked the powershell commandlets for ADFS and I can only seem to find one that let's me set the polling interval, but not perform a 1 time immediate sync Searched the usual suspects, but just can't find a ADFS-SyncMyStuffNow command... Anyone?

  Read the article

• Laptop not charging when connected to mains outlet

  - by Josh

  I've had this laptop for a few weeks now, it's a Sony Vaio. I went to charge it a few days ago and plugged in the power cable, but it's not charging. The battery icon in the Windows taskbar to the bottom right says it's plugged in and charging, but the charge level never goes above 2%. I have checked and I don't have a hcarging switch on the laptop anywhere, so it should be charging. If I unplug the cable, the laptop runs out of power within 30 seconds or so, further fueling my thought that it's a faulty battery. Anyone have any bright ideas? If this doesn't get fixed I'll just ring up Sony and get them to send me a replacement battery or something. Thanks.

  Read the article

• bash code in rc.local not excuting after bootup

  - by mrTomahawk

  Does anyone know why a system would not execute the script code within rc.local on bootup? I have a post configuration bash script that I want to run after the initial install of VMware ESX (Red Hat), and for some reason it doesn't seem to execute. I have the setup to log its start of execution and even its progress so that I can see how far it gets in case it fails at some point, but even when I look at that log, I am finding that didn't even started the execution of the script code. I already checked to see that script has execution permissions (755), what else should I be looking at? Here is the first few lines of my code: #!/bin/sh echo >> /tmp/configLog "" echo >> /tmp/configLog "Entering maintenance mode"

  Read the article

• Hosting provider that allows you to host your own VM image?

  - by Timo Geusch

  I've already looked at the 'Best Hosted VM Provider' question and checked the recommendations there, but I seem to have slightly odd requirements. Basically, I am looking for a host that allows me to host a VM image I supply (FreeBSD, which most of the suggested hosters don't support, they only seem to support various Linuxes) instead of one of their standard images. I'm a long time BSD user and have had colo BSD servers in the past so I'm pretty sure that i don't need much in the way of software support, but I'd basically like to run my server on managed hardware without having to rent the whole server. For the usage I have that would way OTT as we're talking a couple of small apps with very few users, a couple of blogs and (most importantly) email hosting for about 6-10 domains with moderate traffic levels. Oh, and reliability trumps cost to a certain extent.

  Read the article

• SBS 2008 DNS issues in BPA

  - by evesirim

  I'm gettng constant Critical Issue events in the Small Business Server Best Practices Analyser & resulting SBS Console reports that begin "The DNS client is not configured to point only to the internal IP address of the server.". When I check the DNS Manager, there are two separate IPs listed, one ***.***.***.2 and the other ***.***.***.28. I have checked online after an ipconfig /all and have found the reason for this to be that the second IP is created by DHCP for RAS & VPN purposes. It seems to cause no conflicts of any detrimental result apart from constantly sending me error messages and alerted reports. Does anyone know of a way that I can change settings somewhere so that Windows accepts this second IP, or at least stops alerting me of its prescence? Perhaps a registry hack of some kind...? Many thanks in advance

  Read the article

• Munin "Available entropy" when using address space layout randomization

  - by clawspoon

  Having just configured Munin for statistics logging on my gentoo server (hardened profile), I am noticing that my "Available entropy" is consitently in the 200-300 range. This seems way to low, so I checked it manually using the command $ cat /proc/sys/kernel/random/entropy_avail 3544 Odd. Consistently very low values in Munin and practically filled up when checking manually. After thinking about the problem for a while I came to the conclusion that the problem is probably that I'm using Adress Space Layout Randomization which is using the entropy when running commands/programs. Since Munin runs a whole slew of programs all the entropy is used up, and Munin then measures how much entropy there is, resulting in the low values. Does anyone have any experience with this? How can this be avoided?

  Read the article

• File sharing from a cable connected pc to wifi connected laptop (windows 7 ultimate)

  - by Aiden Jones

  I have a one desktop running windows 7 ultimate connected to Ethernet cable. And I want to share folder to another wifi connected laptop (also windows 7 ultimate). Both machines are on the same home internet connection. I have tried to share folders by going to properties sharing advanced sharing permissions checked all the boxes to allow all but I don’t see any shared files on my laptop. I know it’s possible to share folders between two Wi-Fi connected machines but how can it be done when one pc is cable connected and other is Wi-Fi connected on the same internet connection.

  Read the article

• What's created this key combo?

  - by user73784

  I've recently upgraded my iMac to OSX Mavericks. I'm finding that when I press Control-Shift-N something is immediately locking my screen and making it dark. I can still hear my streaming audio playing, so I guess it's not logging me out. I've looked carefully through the list of keyboard shortcuts in System Preferences, and that key combo isn't mentioned anywhere. Is there any place I can get a list of all active keyboard shortcuts? Is there any terminal command I can run to see which application has taken over this keypress combination? It's really annoying because I habitually use that combo in PHPStorm! (And yes, I have checked the keymaps there too.)

  Read the article

• Remote host: can tracert, can telnet, can*not* browse: what gives?

  - by MacThePenguin

  One of my customers of the company I work for has made a change to their Internet connection, and now we can't connect to them any more from our LAN. To help me troubleshoot this issue, the network guy on the customer's site has configured their firewall so that a HTTPS connection to their public IP address is open to any IP. I should put https://<customer's IP> in my browser and get a web page. Well, it works from any network I've tried (even from my smartphone), just not from my company's LAN. I thought it may be an issue with our firewall (though I checked its rules and it allows outbound TCP port 443 to anywhere), so I just connected a PC directly to the network connection of our provider, bypassing out firewall completely, and still it didn't work (everything else worked). So I asked for help to our Internet provider's customer service, and they asked me to do a tracert to our customer's IP. The tracert is successful, as the final hop shown in the output is the host I want to reach. So they said there's no problem. :( I also tried telnet <customer's IP> 443 and that works as well: I get a blank page with the cursor blinking (I've tried using another random port and that gives me an error message, as it should). Still, from any browser of any PC in my LAN I can't open that URL. I tried checking the network traffic with Wireshark: I see the packages going through and answers coming back, thought the packets I see passing are far less than they are if I successfully connect to another HTTPS website. See the attached screenshot: I had to blur the IPs, anyway the longer string is my PC's local IP address, the shorter one is the customer's public IP. I don't know what else to try. This is the only IP doing this... Any idea what could I try to find a solution to this issue? Thanks, let me know if you need further details. Edit: when I say "it doesn't work" I mean: the page doesn't open, the browser keeps loading for a long time and eventually shows an error saying that the page cannot be opened. I'm not in my office now so I can't paste the exact message, but it's the usual message you get when the browser reaches its timeout. When I say "it works", I mean the browser loads and shows a webpage (it's the logon page for the customers' firewall admin interface: so there's the firewall brand's logo and there are fields to enter a user id and a password). Update 13/09/2012: tried again to connect to the customer's network through our Internet connection without a firewall. This is what I did: Run a Kubuntu 12.04 live distro on a spare laptop; Updated all the packages I could and installed WireShark; Attached it to my LAN and verified that I couldn't open https://<customer's IP>. Verified that the Wireshark trace for this attempt was the same as the one I've already posted; Verified that I could connect to another customer's host using rdesktop (it worked); Tried to rdesktop to <customer's IP>, here's the output: kubuntu@kubuntu:/etc$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: recv: Connection reset by peer Disconnected the laptop from the LAN; Disconnected the firewall from the Extranet connection, connected the laptop instead. Set its network configuration so that I could access the Internet; Verified that I could connect to other websites in http and https and in RDP to other customers' hosts - it all worked as expected; Verified that I could still traceroute to <customer's IP>: I could; Verified that I still couldn't open https://<customer's IP> (same exact result as before); Checked the WireShark trace for this attempt and noticed a different behaviour: I could see packets going out to the customer's IP, but no replies at all; Tried to run rdesktop again, with a slightly different result: kubuntu@kubuntu:/etc/network$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: <customer's IP>: unable to connect Finally gave up, put everything back as it was before, turned off the laptop and lost the WireShark traces I had saved. :( I still remember them very well though. :) Can you get anything out of it? Thank you very much. Update 12/09/2012 n.2: I followed the suggestion by MadHatter in the comments. From inside the firewall, this is what I get: user@ubuntu-mantis:~$ openssl s_client -connect <customer's IP>:443 CONNECTED(00000003) If I now type GET / the output pauses for several seconds and then I get: write:errno=104 I'm going to try the same, but bypassing the firewall, as soon as I can. Thanks. Update 12/09/2012 n.3: So, I think ISA Server is altering the results of my tests... I tried installing Wireshark directly on the firewall and monitoring the packets on the Extranet network card. When the destination is the customer's IP, whatever service I try to connect to (HTTPS, RDP or SAProuter), I can only see outbound packets and no response packets whatsoever from their side. It looks like ISA Server is "faking" the remote server's replies, that's why I get a connection using telnet or the openSSL client. This is the wireshark trace from inside our LAN: But this is the trace on the Extranet network card: This makes a bit more sense... I'll send this info to the customer's tech and see if he can make anything out of it. Thanks to all that took the time to read my question and post suggestions. I'll update this post again.

  Read the article

• The session setup from the computer <computerName> failed to authenticate.

  - by TheCodeMonk

  Every once in a while, I get a client PC that won't be able to log into the domain. This morning it was telling us that the trust relationship between the pc and the domain failed. I checked the event logs on the primary domain controller and I see this for 2 PCs (the one that had the problem and one that can log in today). The session setup from the computer failed to authenticate. The name(s) of the account(s) referenced in the security database is . The following error occurred: Access is denied. I know how to fix this, by rejoining the PC to the domain... But why does this happen and how can I prevent it so I don't have to keep rejoining PCs to the domain?

  Read the article

< Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >