Search Results

Search found 8416 results on 337 pages for 'stop'.

Page 291/337 | < Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >

• SQLAuthority News – Wireless Router Security and Attached Devices – Complex Password

  - by pinaldave

  In the last four days (April 21-24), I have received calls from friends who told me that they have got strange emails from me. To my surprise, I did not send them any emails. I was not worried until my wife complained that she was not able to find one of the very important folders containing our daughter’s photo that is located in our shared drive. This was alarming in my par, so I started a search around my computer’s folders. Again, please note that I am by no means a security expert. I checked my entire computer with virus and spyware, and strangely, there I found nothing. I tried to think what can cause this happening. I suddenly realized that there was a power outage in my area for about two hours during the days I have mentioned. Back then, my wireless router needed to be reset, and so I did. I had set up my WPA-PSK [TKIP] + WPA2-PSK [AES] very well. My key was very simple ( ‘SQLAuthority1′), and I never thought of changing it. (It is now replaced with a very complex one). While checking the Attached Devices, I found out that there was another very strange computer name and IP attached to my network. And so as soon as I found out that there is strange device attached to my computer, I shutdown my local network. Afterwards, I reconfigured my wireless router with a more complex security key. Since I created the complex password, I noticed that the user is no more connecting to my machine. Subsequently, I figured out that I can also set up Access Control List. I added my networked computer to that list as well. When I tried to connect from an external laptop which was not in the list but with a valid security key, I was not able to access the network, neither able to connect to it. I wasn’t also able to connect using a remote desktop, so I think it was good. If you have received any nasty emails from me (from my gmail account) during the afore-mentioned days, I want to apologize. I am already paying for my negligence of not putting a complex password; by way of losing the important photos of my daughter. I have already checked with my client, whose password I saved in SSMS, so there was no issue at all. In fact, I have decided to never leave any saved password of production server in my SSMS. Here is the tip SQL SERVER – Clear Drop Down List of Recent Connection From SQL Server Management Studio to clean them. I think after doing all this, I am feeling safe right now. However, I believe that safety is an illusion of many times. I need your help and advice if there is anymore I can do to stop unauthorized access. I am seeking advice and help through your comments. Reference : Pinal Dave (http://www.SQLAuthority.com) Filed under: SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• JavaOne Tutorial Report - JavaFX 2 – A Java Developer’s Guide

  - by Janice J. Heiss

  Oracle Java Technology Evangelist Stephen Chin and Independent Consultant Peter Pilgrim presented a tutorial session intended to help developers get a handle on JavaFX 2. Stephen Chin, a Java Champion, is co-author of the Pro JavaFX Platform 2, while Java Champion Peter Pilgrim is an independent consultant who works out of London.NightHacking with Stephen ChinBefore discussing the tutorial, a note about Chin’s “NightHacking Tour,” wherein from 10/29/12 to 11/11/12, he will be traveling across Europe via motorcycle stopping at JUGs and interviewing Java developers and offering live video streaming of the journey. As he says, “Along the way, I will visit user groups, interviewing interesting folks, and hack on open source projects. The last stop will be the Devoxx conference in Belgium.”It’s a dirty job but someone’s got to do it. His trip will take him from the UK through the Netherlands, Germany, Switzerland, Italy, France, and finally to Devoxx in Belgium. He has interviews lined up with Ben Evans, Trisha Gee, Stephen Coulebourne, Martijn Verburg, Simon Ritter, Bert Ertman, Tony Epple, Adam Bien, Michael Hutterman, Sven Reimers, Andres Almiray, Gerrit Grunewald, Bertrand Boetzmann, Luc Duponcheel, Stephen Janssen, Cheryl Miller, and Andrew Phillips. If you expect to be in Chin’s vicinity at the end of October and in early November, by all means get in touch with him at his site and add your perspective. The more the merrier! Taking the JavaFX PlungeNow to the business at hand. The “JavaFX 2 – A Java Developer’s Guide” tutorial introduced Java developers to the JavaFX 2 platform from the perspective of seasoned Java developers. It demonstrated the breadth of the JavaFX APIs through examples that are built out in the course of the session in an effort to present the basic requirements in using JavaFX to build rich internet applications. Chin began with a quote from Oracle’s Christopher Oliver, the creator of F3, the original version of JavaFX, on the importance of GUIs:“At the end of the day, on the one hand we have computer systems, and on the other, people. Connecting them together, and allowing people to interact with computer systems in a compelling way, requires graphical user interfaces.”Chin explained that JavaFX is about producing an immersive application experience that involves cross-platform animation, video and charting. It can integrate Java, JavaScript and HTML in the same application. The new graphics stack takes advantage of hardware acceleration for 2D and 3D applications. In addition, we can integrate Swing applications using JFXPanel.He reminded attendees that they were building JavaFX apps using pure Java APIs that included builders for declarative construction; in addition, alternative languages can be used for simpler UI creation. In addition, developers can call upon alternative languages such as GroovyFX, ScalaFX and Visage, if they want simpler UI creation. He presented the fundamentals of JavaFX 2.0: properties, lists and binding and then explored primitive, object and FX list collection properties. Properties in JavaFX are observable, lazy and type safe. He then provided an example of property declaration in code.  Pilgrim and Chin explained the architectural structure of JavaFX 2 and its basic properties:JavaFX 2.0 properties – Primitive, Object, and FX List Collection properties. * Primitive Properties* Object Properties* FX List Collection Properties* Properties are:– Observable– Lazy– Type SafeChin and Pilgrim then took attendees through several participatory demos and got deep into the weeds of the code for the two-hour session. At the end, everyone knew a lot more about the inner workings of JavaFX 2.0.

  Read the article

• MSMQ messages using HTTP just won't get delivered

  - by John Breakwell

  I'm starting off the blog with a discussion of an unusual problem that has hit a couple of my customers this month. It's not a problem you'd expect to bump into and the solution is potentially painful. Scenario You want to make use of the HTTP protocol to send MSMQ messages from one machine to another. You have installed HTTP support for MSMQ and have addressed your messages correctly but they will not leave the outgoing queue. There is no configuration for HTTP support - setup has already done all that for you (although you may want to check the most recent "Installation of the MSMQ HTTP Support Subcomponent" section of MSMQINST.LOG to see if anything DID go wrong) - so you can't tweak anything. Restarting services and servers makes no difference - the messages just will not get delivered. The problem is documented and resolved by Knowledgebase article 916699 "The message may not be delivered when you use the HTTP protocol to send a message to a server that is running Message Queuing 3.0". It is unlikely that you would be able to resolve the problem without the assistance of PSS because there are no messages that can be seen to assist you and only access to the source code exposes the root cause. As this communication is over HTTP, the IIS logs would be a good place to start. POST entries are logged which show that connectivity is working and message delivery is being attempted: #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2006-09-12 12:11:29 #Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status 2006-09-12 12:12:12 W3SVC1 10.1.17.219 POST /msmq/private$/test - 80 - 10.2.200.3 - 200 0 0 If you capture the traffic with Network Monitor you can see the POST being sent to the server but you also see a response being returned to the client: HTTP: Response to Client; HTTP/1.1; Status Code = 500 - Internal Server Error "Internal Server Error" means we can probably stop looking at IIS and instead focus on the Message Queuing ISAPI extension (Mqise.dll). MSMQ 3.0 (Windows XP and Windows Server 2003) comes with error logging enabled by default but the log files are in binary format - MSMQ 2.0 generated logging in plain text. The symbolic information needed for formatting the files is not currently publicly available so log files have to be sent in to Microsoft PSS.  Although this does mean raising a support case, formatting the log files to text and returning them to the customer shouldn't take long. Obviously the engineer analyses them for you - I just want to point out that you can see the logging output in text format if you want it. The important entries in the log for this problem are: [7]b48.928 09/12/2006-13:20:44.552 [mqise GetNetBiosNameFromIPAddr] ERROR:Failed to get the NetBios name from the DNS name, error = 0xea [7]b48.928 09/12/2006-13:20:44.552 [mqise RPCToServer] ERROR:RPC call R_ProcessHTTPRequest failed, error code = 1702(RPC_S_INVALID_BINDING) which allow a Microsoft escalation engineer to check the MQISE source code to see what is going wrong. This problem according to the article occurs when the extension tries to bind to the local MSMQ service after the extension receives a POST request that contains an MSMQ message. MSMQ resolves the server name by using the DNS host name but the extension cannot bind to the service because the buffer that MSMQ uses to resolve the server name is too small - server names that are exactly 15 characters long will not fit. RPC exception 0x6a6 (RPC_S_INVALID_BINDING) occurs in the W3wp.exe process but the exception is handled and so you do not receive an error message. The workaround is to rename the MSMQ server to something less than 15 characters. If the problem has only just been noticed in a production environment - an application may have been modified to get through a newly-implemented firewall, for example - then renaming is going to be an issue. Other applications may need to be reinstalled or modified if server names are hard-coded or stored in the registry. The renaming may also break a company naming convention where the name is built up from something like location+department+number. If you want to learn more about MSMQ logging then check out Chapter 15 of the MSMQ FAQ. In fact, even if you DON'T want to learn anything about MSMQ logging you should read the FAQ anyway as there is a huge amount of useful information on known issues and the like.

  Read the article

• GPU Debugging with VS 11

  - by Daniel Moth

  With VS 11 Developer Preview we have invested tremendously in parallel debugging for both CPU (managed and native) and GPU debugging. I'll be doing a whole bunch of blog posts on those topics, and in this post I just wanted to get people started with GPU debugging, i.e. with debugging C++ AMP code. First I invite you to watch 6 minutes of a glimpse of the C++ AMP debugging experience though this video (ffw to minute 51:54, up until minute 59:16). Don't read the rest of this post, just go watch that video, ideally download the High Quality WMV. Summary GPU debugging essentially means debugging the lambda that you pass to the parallel_for_each call (plus any functions you call from the lambda, of course). CPU debugging means debugging all the code above and below the parallel_for_each call, i.e. all the code except the restrict(direct3d) lambda and the functions that it calls. With VS 11 you have to choose what debugger you want to use for a particular debugging session, CPU or GPU. So you can place breakpoints all over your code, then choose what debugger you want (CPU or GPU), and you'll only be able to hit breakpoints for the code type that the debugger engine understands – the remaining breakpoints will appear as unbound. If you want to hit the unbound breakpoints, you'd have to stop debugging, and start again with the other debugger. Sorry. We suck. We know. But once you are past that limitation, I think you'll find the experience truly rewarding – seriously! Switching debugger engines With the Developer Preview bits, one way to switch the debugger engine is through the project properties – see the screenshots that follow. This one is showing the CPU option selected, which is basically the default that you are all familiar with: This screenshot is showing the GPU option selected, by changing the debugger launcher (notice that this applies for both the local and remote case): You actually do not have to open the project properties just for switching the debugger engine, you can switch the selection from the toolbar in VS 11 Developer Preview too – see following screenshot (the effect is the same as if you opened the project properties and switched there) Breakpoint behavior Here are two screenshots, one showing a debugging session for CPU and the other a debugging session for GPU (notice the unbound breakpoints in each case) …and here is the GPU case (where we cannot bind the CPU breakpoints but can the GPU breakpoint, which is actually hit) Give C++ AMP debugging a try So to debug your C++ AMP code, pull down the drop down under the 'play' button to select the 'GPU C++ Direct3D Compute Debugger' menu option, then hit F5 (or the 'play' button itself). Then you can explore debugging by exploring the menus under the Debug and under the Debug->Windows menus. One way to do that exploration is through the C++ AMP debugging walkthrough on MSDN. Another way to explore the C++ AMP debugging experience, you can use the moth.cpp code file, which is what I used in my BUILD session debugger demo. Note that for my demo I was using the latest internal VS11 bits, so your experience with the Developer Preview bits won't be identical to what you saw me demonstrate, but it shouldn't be far off. Stay tuned for a lot more content on the parallel debugger in VS 11, both CPU and GPU, both managed and native. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Query Logging in Analysis Services

  - by MikeD

  On a project I work on, we capture the queries that get executed on our Analysis Services instance (SQL Server 2008 R2) and use the table for helping us to build aggregations and also we aggregate the query log daily into a data warehouse of operational data so we can track usage of our Analysis databases by users over time. We've learned a couple of helpful things about this logging that I'd like to share here.First off, the query log table automatically gets cleaned out by SSAS under a few conditions - schema changes to the analysis database and even regular data and aggregation processing can delete rows in the table. We like to keep these logs longer than that, so we have a trigger on the table that copies all rows into another table with the same structure:Here is our trigger code:CREATE TRIGGER [dbo].[SaveQueryLog] on [dbo].[OlapQueryLog] AFTER INSERT AS       INSERT INTO dbo.[OlapQueryLog_History] (MSOLAP_Database, MSOLAP_ObjectPath, MSOLAP_User, Dataset, StartTime, Duration)      SELECT MSOLAP_Database, MSOLAP_ObjectPath, MSOLAP_User, Dataset, StartTime, Duration FROM inserted Second, the query logging process is "best effort" - if SSAS cannot connect to the database listed in the QueryLogConnectionString in the Analysis Server properties, it just stops logging - it doesn't generate any errors to the client at all, which is a good thing. Once it stops logging, it doesn't retry later - an hour, a day, a week, or even a month later, so long as the service doesn't restart.That has burned us a couple of times, when we have made changes to the service account that is used for SSAS, and that account doesn't have access to the database we want to log to. The last time this happened, we noticed a while later that no logging was taking place, and I determined that the service account didn't have sufficient permissions, so I made the necessary changes to give that service account access to the logging database. I first tried just the db_datawriter role and that wasn't enough, so I granted the service account membership in the db_owner role. Yes, that's a much bigger set of permissions, but I didn't want to search out the specific permissions at the time. Once I determined that the service account had the appropriate permissions, I wanted to get query logging restarted from SSAS, and I wondered how to do that? Having just used a larger hammer than necessary with the db_owner role membership, I considered just restarting SSAS to get it logging again. However, this was a production server, and it was in the middle of business hours, and there were active users connecting to that SSAS instance, so I thought better of it.As I considered the options, I remembered that the first time I set up query logging, by putting in a valid connection string to the QueryLogConnectionString server property, logging started immediately after I saved the properties. I wondered if I could make some other change to the connection string so that the query logging would start again without restarting the service. I went into the connection string dialog, went to the All page, and looked at the properties I could change that wouldn't affect the actual connection. Aha! The Application Name property would do just nicely - I set it to "SSAS Query Logging" (it was previously blank) and saved the changes to the server properties. And the query logging started up right away. If I need to get this running again in the future, I could just make a small change in the Application Name property again, save it, and even change it back again if I wanted to.The other nice side effect of setting the Application Name property is that now I can see (and possibly filter for or filter out) the SQL activity in that database that is related to the query logging process in Profiler:  To sum up:The SSAS Query Logging process will automatically delete rows from the QueryLog table, so if you want to keep them longer, put a trigger on the table to copy the rows to another tableThe SSAS service account requires more than db_datawriter role membership (and probably less than db_owner) in the database specified in the QueryLogConnectionString server property to successfully insert log rows to the QueryLog  table.Query logging will stop quietly whenever it encounters an error. Make a change to the QueryLogConnectionString server property (such as the Application Name attribute) to get query logging to restart and you won't have to restart the service.

  Read the article

• Framework 4 Features: Support for Timed Jobs

  - by Anthony Shorten

  One of the new features of the Oracle Utilities Application Framework V4 is the ability for the batch framework to support Timed Batch. Traditionally batch is associated with set processing in the background in a fixed time frame. For example, billing customers. Over the last few versions their has been functionality required by the products required a more monitoring style batch process. The monitor is a batch process that looks for specific business events based upon record status or other pieces of data. For example, the framework contains a fact monitor (F1-FCTRN) that can be configured to look for specific status's or other conditions. The batch process then uses the instructions on the object to determine what to do. To support monitor style processing, you need to run the process regularly a number of times a day (for example, every ten minutes). Traditional batch could support this but it was not as optimal as expected (if you are a site using the old Workflow subsystem, you understand what I mean). The Batch framework was extended to add additional facilities to support times (and continuous batch which is another new feature for another blog entry). The new facilities include: The batch control now defines the job as Timed or Not Timed. Non-Timed batch are traditional batch jobs. The timer interval (the interval between executions) can be specified The timer can be made active or inactive. Only active timers are executed. Setting the Timer Active to inactive will stop the job at the next time interval. Setting the Timer Active to Active will start the execution of the timed job. You can specify the credentials, language to view the messages and an email address to send the a summary of the execution to. The email address is optional and requires an email server to be specified in the relevant feature configuration. You can specify the thread limits and commit intervals to be sued for the multiple executions. Once a timer job is defined it will be executed automatically by the Business Application Server process if the DEFAULT threadpool is active. This threadpool can be started using the online batch daemon (for non-production) or externally using the threadpoolworker utility. At that time any batch process with the Timer Active set to Active and Batch Control Type of Timed will begin executing. As Timed jobs are executed automatically then they do not appear in any external schedule or are managed by an external scheduler (except via the DEFAULT threadpool itself of course). Now, if the job has no work to do as the timer interval is being reached then that instance of the job is stopped and the next instance started at the timer interval. If there is still work to complete when the interval interval is reached, the instance will continue processing till the work is complete, then the instance will be stopped and the next instance scheduled for the next timer interval. One of the key ways of optimizing this processing is to set the timer interval correctly for the expected workload. This is an interesting new feature of the batch framework and we anticipate it will come in handy for specific business situations with the monitor processes.

  Read the article

• Principles of Big Data By Jules J Berman, O&rsquo;Reilly Media Book Review

  - by Compudicted

  Originally posted on: http://geekswithblogs.net/Compudicted/archive/2013/11/04/principles-of-big-data-by-jules-j-berman-orsquoreilly-media.aspx A fantastic book! Must be part, if not yet, of the fundamentals of the Big Data as a field of science. Highly recommend to those who are into the Big Data practice. Yet, I confess this book is one of my best reads this year and for a number of reasons: The book is full of wisdom, intimate insight, historical facts and real life examples to how Big Data projects get conceived, operate and sadly, yes, sometimes die. But not only that, the book is most importantly is filled with valuable advice, accurate and even overwhelming amount of reference (from the positive side), and the author does not event stop there: there are numerous technical excerpts, links and examples allowing to quickly accomplish many daunting tasks or make you aware of what one needs to perform as a data practitioner (excuse my use of the word practitioner, I just did not find a better substitute to it to trying to reference all who face Big Data). Be aware that Jules Berman’s background is in medicine, naturally, this book discusses this subject a lot as it is very dear to the author’s heart I believe, this does not make this book any less significant however, quite the opposite, I trust if there is an area in science or practice where the biggest benefits can be ripped from Big Data projects it is indeed the medical science, let’s make Cancer history! On a personal note, for me as a database, BI professional it has helped to understand better the motives behind Big Data initiatives, their underwater rivers and high altitude winds that divert or propel them forward. Additionally, I was impressed by the depth and number of mining algorithms covered in it. I must tell this made me very curious and tempting to find out more about these indispensable attributes of Big Data so sure I will be trying stretching my wallet to acquire several books that go more in depth on several most popular of them. My favorite parts of the book, well, all of them actually, but especially chapter 9: Analysis, it is just very close to my heart. But the real reason is it let me see what I do with data from a different angle. And then the next - “Special Considerations”, they are just two logical parts. The writing language is of this book is very acceptable for all levels, I had no technical problem reading it in ebook format on my 8” tablet or a large screen monitor. If I would be asked to say at least something negative I have to state I had a feeling initially that the book’s first part reads like an academic material relaxing the reader as the book progresses forward. I admit I am impressed with Jules’ abilities to use several programming languages and OSS tools, bravo! And I agree, it is not too, too hard to grasp at least the principals of a modern programming language, which seems becomes a defacto knowledge standard item for any modern human being. So grab a copy of this book, read it end to end and make yourself shielded from making mistakes at any stage of your Big Data initiative, by the way this book also helps build better future Big Data projects. Disclaimer: I received a free electronic copy of this book as part of the O'Reilly Blogger Program.

  Read the article

• IntelliTrace As a Learning Tool for MVC2 in a VS2010 Project

  - by Sam Abraham

  IntelliTrace is a new feature in Visual Studio 2010 Ultimate Edition. I see this valuable tool as a “Program Execution Recorder” that captures information about events and calls taking place as soon as we hit the VS2010 play (Start Debugging) button or the F5 key. Many online resources already discuss IntelliTrace and the benefit it brings to both developers and testers alike so I see no value of just repeating this information.  In this brief blog entry, I would like to share with you how I will be using IntelliTrace in my upcoming talk at the Ft Lauderdale ArcSig .Net User Group Meeting on April 20th 2010 (check http://www.fladotnet.com for more information), as a learning tool to demonstrate the internals of the lifecycle of an MVC2 application.  I will also be providing some helpful links that cover IntelliTrace in more detail at the end of my article for reference. IntelliTrace is setup by default to only capture execution events. Microsoft did such a great job on optimizing its recording process that I haven’t even felt the slightest performance hit with IntelliTrace running as I was debugging my solutions and projects.  For my purposes here however, I needed to capture more information beyond execution events, so I turned on the option for capturing calls in addition to events as shown in Figures 1 and 2. Changing capture options will require us to stop our debugging session and start over for the new settings to take place. Figure 1 – Access IntelliTrace options via the Tools->Options menu items Figure 2 – Change IntelliTrace Options to capture call information as well as events Notice the warning with regards to potentially degrading performance when selecting to capture call information in addition to the default events-only setting. I have found this warning to be sure true. My subsequent tests showed slowness in page load times compared to rendering those same exact pages with the “event-only” option selected. Execution recording is auto-started along with the new debugging session of our project. At this point, we can simply interact with the application and continue executing normally until we decide to “playback” the code we have executed so far.  For code replay, first step is to “break” the current execution as show in Figure 3.   Figure 3 – Break to replay recording A few tries later, I found a good process to quickly find and demonstrate the MVC2 page lifecycle. First-off, we start with the event view as shown in Figure 4 until we find an interesting event that needs further studying.  Figure 4 – Going through IntelliTrace’s events and picking as specific entry of interest We now can, for instance, study how the highlighted HTTP GET request is being handled, by clicking on the “Calls View” for that particular event. Notice that IntelliTrace shows us all calls that took place in servicing that GET request. Double clicking on any call takes us to a more granular view of the call stack within that clicked call, up until getting to a specific line of code where we can do a line-by-line replay of the execution from that point onwards using F10 or F11 just like our typical good old VS2008 debugging helped us accomplish. Figure 5 – switching to call view on an event of interest Figure 6 – Double clicking on call shows a more granular view of the call stack. In conclusion, the introduction of IntelliTrace as a new addition to the VS developers’ tool arsenal enhances development and debugging experience and effectively tackles the “no-repro” problem. It will also hopefully enhance my audience’s experience listening to me speaking about  an MVC2 page lifecycle which I can now easily visually demonstrate, thereby improving the probability of keeping everybody awake a little longer. IntelliTrace References: http://msdn.microsoft.com/en-us/magazine/ee336126.aspx http://msdn.microsoft.com/en-us/library/dd264944(VS.100).aspx

  Read the article

• Create Music Playlists in Windows 7 Media Center

  - by DigitalGeekery

  One of the new features in Windows 7 Media Center is the ability to easily create music playlists without using Media Player. Today we’ll take a closer look at how to create them directly in Media Center. Create Manual Playlists Open Windows Media Center and select the Music Library. From within the Music Library, choose playlists from the top menu.   Then select Create Playlist. Give your new playlist a name, and select Next. Choose Music Library and select Next.    Select “songs” from the top menu, choose the songs for your playlist from your library, and select Next when finished. You can also click Select All to add all songs to your playlist, or clear all to remove them. Note: you can also sort by artist, album, genre, etc. from the top menu.   Now you can review and edit your playlist. Click the up and down pointers to move songs up and down in the playlist, or “X” to remove them. You can also go back and add additional songs by selecting Add More. Click Create when you are finished.   Auto Playlists Windows Media Center also allows you to create six different auto playlists. These are dynamic playlists based on pre-defined criteria. Auto Playlists include All Music, Music added in the last month, Music auto rated at 5 stars, Music played in the last month, Music played the most, and Music rated 4 or 5 stars. These Auto Playlists will change dynamically as your library and listening habits change. Your new music playlists can be found under playlists in the music library. Select play playlist to start the music. Now kick back and enjoy the music from your playlist. Conclusion While earlier versions of WMC allowed you to create playlists, you had to do it through Windows Media Player. This is a nice new feature for music lovers who use WMC and prefer to do everything with a remote. Do you already have playlists that you’ve created in Windows Media Player? Windows Media Center can play those too. If your playlists are in the default Music folder, Media Center will detect them automatically and add them to your Music Library. Plus, any playlists you create in Media Center are also available for Media Player. For more on creating Playlists in Media Player, check out our previous articles on how to create a custom playlist in Windows Media Player 12, and how to create auto playlists in WMP 12. Similar Articles Productive Geek Tips How To Rip a Music CD in Windows 7 Media CenterCreate Custom Playlists in Windows Media Player 12Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How to Create Auto Playlists in Windows Media Player 12Fixing When Windows Media Player Library Won’t Let You Add Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium

  Read the article

• What makes them click ?

  - by Piet

  The other day (well, actually some weeks ago while relaxing at the beach in Kos) I read ‘Neuro Web Design - What makes them click?’ by Susan Weinschenk. (http://neurowebbook.com) The book is a fast and easy read (no unnecessary filler) and a good introduction on how your site’s visitors can be steered in the direction you want them to go. The Obvious The book handles some of the more known/proven techniques, like for example that ratings/testimonials of other people can help sell your product or service. Another well known technique it talks about is inducing a sense of scarcity/urgency in the visitor. Only 2 seats left! Buy now and get 33% off! It’s not because these are known techniques that they stop working. Luckily 2/3rd of the book handles less obvious techniques, otherwise it wouldn’t be worth buying. The Not So Obvious A less known influencing technique is reciprocity. And then I’m not talking about swapping links with another website, but the fact that someone is more likely to do something for you after you did something for them first. The book cites some studies (I always love the facts and figures) and gives some actual examples of how to implement this in your site’s design, which is less obvious when you think about it. Want to know more ? Buy the book! Other interesting sources For a more general introduction to the same principles, I’d suggest ‘Yes! 50 Secrets from the Science of Persuasion’. ‘Yes!…’ cites some of the same studies (it seems there’s a rather limited pool of studies covering this subject), but of course doesn’t show how to implement these techniques in your site’s design. I read ‘Yes!…’ last year, making ‘Neuro Web Design’ just a little bit less interesting. !!!Always make sure you’re able to measure your changes. If you haven’t yet, check out the advanced segmentation in Google Analytics (don’t be afraid because it says ‘beta’, it works just fine) and Google Website Optimizer. Worth Buying? Can I recommend it ? Sure, why not. I think it can be useful for anyone who ever had to think about the design or content of a site. You don’t have to be a marketing guy to want a site you’re involved with to be successful. The content/filler ratio is excellent too: you don’t need to wade through dozens of pages to filter out the interesting bits. (unlike ‘The Design of Sites’, which contains too much useless info and because it’s in dead-tree format, you can’t google it) If you like it, you might also check out ‘Yes! 50 Secrets from the Science of Persuasion’. Tip for people living in Europe: check Amazon UK for your book buying needs. Because of the low UK Pound exchange rate, it’s usually considerably cheaper and faster to get a book delivered to your doorstep by Amazon UK compared to having to order it at the local book store or web-shop.

  Read the article

• Backup and Transfer Foobar2000 to a New Computer

  - by Mysticgeek

  If you are a fan of Foobar2000 you undoubtedly have tweaked it to the point where you don’t want to set it all up again on a new machine. Here we look at how to transfer Foobar2000 settings to a new Windows 7 machine. Note: For this article we are transferring Foobar2000 settings from on Windows 7 machine to another over a network running Windows Home Server.  Foobar2000 Foobar2000 is an awesome music player which is highly customizable and we’ve previously covered. Here we take a look at how it’s set up on the current machine. It’s a nothing flashy, but is set up for our needs and includes a lot of components and playlists.   Backup Files Rather than wasting time setting everything up again on a new machine, we can backup the important files and replace them on the new machine. First type or copy the following into the Explorer address bar. %appdata%\foobar2000 Now copy all of the files in the folder and store them on a network drive or some type removable media or device. New Machine Now you can install the latest version of Foobar2000 on your new machine. You can go with a Standard install as we will be replacing our backed up configuration files anyway. When it launches, it will be set with all the defaults…and we want what we had back. Browse to the following on the new machine… %appdata%\foobar2000 Delete all of the files in this directory… Then replace them with the ones we backed up from the other machine. You’ll also want to navigate to C:\Program Files\Foobar2000 and replace the existing Components folder with the backed up one. When you get the screen telling you there is already files of the same name, select Move and Replace, and check the box Do this for the next 6 conflicts. Now we’re back in business! Everything is exactly as it was on the old machine. In this example, we were moving the Foobar2000 files from a computer on the same home network. All the music is coming from a directory on our Windows Home Server so they hadn’t changed. If you’re moving these files to a computer on another machine… say your work computer, you’ll need to adjust where the music folders point to. Windows XP If you’re setting up Foobar2000 on an XP machine, you can enter the following into the Run line. %appdata%\foobar2000 Then copy your backed up files into the Foobar2000 folder, and remember to swap out the Components folder in C:\Program Files\Foobar2000. Confirm to replace the files and folders by clicking Yes to All… Conclusion This method worked perfectly for us on our home network setup. There might be some other things that will need a bit of tweaking, but overall the process is quick and easy. There is a lot of cool things you can do with Foobar2000 like rip an audio CD to FlAC. If you’re a fan of Foobar2000 or considering switching to it, we will be covering more awesome features in future articles. Download Foobar2000 – Windows Only Similar Articles Productive Geek Tips Backup or Transfer Microsoft Office 2007 Quick Parts Between ComputersBackup and Restore Internet Explorer’s Trusted Sites ListSecond Copy 7 [Review]Backup and Restore Firefox Profiles EasilyFoobar2000 is a Fully Customizable Music Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• How to reproject a shapefile from WGS 84 to Spherical/Web Mercator projection.

  - by samkea

  Definitions: You will need to know the meaning of these terms below. I have given a small description to the acronyms but you can google and know more about them. #1:WGS-84- World Geodetic Systems (1984)- is a standard reference coordinate system used for Cartography, Geodesy and Navigation. #2: EPGS-European Petroleum Survey Group-was a scientific organization with ties to the European petroleum industry consisting of specialists working in applied geodesy, surveying, and cartography related to oil exploration. EPSG::4326 is a common coordinate reference system that refers to WGS84 as (latitude, longitude) pair coordinates in degrees with Greenwich as the central meridian. Any degree representation (e.g., decimal or DMSH: degrees minutes seconds hemisphere) may be used. Which degree representation is used must be declared for the user by the supplier of data. So, the Spherical/Web Mercator projection is referred to as EPGS::3785 which is renamed to EPSG:900913 by google for use in googlemaps. The associated CRS(Coordinate Reference System) for this is the "Popular Visualisation CRS / Mercator ". This is the kind of projection that is used by GoogleMaps, BingMaps,OSM,Virtual Earth, Deep Earth excetra...to show interactive maps over the web with thier nearly precise coordinates.  Reprojection: After reading alot about reprojecting my coordinates from the deepearth project on Codeplex, i still could not do it. After some help from a colleague, i got my ball rolling.This is how i did it. #1 You need to download and open your shapefile using Q-GIS; its the one with the biggest number of coordinate reference systems/ projections. #2 Use the plugins menu, and enable ftools and the WFS plugin. #3 Use the Vector menu--> Data Management Tools and choose define current projection. Enable, use predefined reference system and choose WGS 84 coodinate system. I am personally in zone 36, so i chose WGS84-UTM Zone 36N under ( Projected Coordinate Systems--> Universal Transverse Mercator) and click ok. #4 Now use the Vector menu--> Data Management Tools and choose export to new projection. The same dialog will pop-up. Now choose WGS 84 EPGS::4326 under Geodetic Coordinate Systems. My Input user Defined Spatial Reference System should looks like this: +proj=tmerc +lat_0=0 +lon_0=33 +k=0.9996 +x_0=500000 +y_0=200000 +ellps=WGS84 +datum=WGS84 +units=m +no_defs Your Output user Defined Spatial Reference System should look like this: +proj=longlat +ellps=WGS84 +datum=WGS84 +no_defs Browse for the place where the shapefile is going to be and give the shapefile a name(like origna_reprojected). If it prompts you to add the projected layer to the TOC, accept. There, you have your re-projected map with latitude and longitude pair of coordinates. #5 Now, this is not the actual Spherical/Web Mercator projection, but dont worry, this is where you have to stop. All the other custom web-mapping portals will pick this projection and transform it into EPGS::3785 or EPSG:900913 but the coordinates will still remain as the LatLon pair of the projected shapefile. If you want to test, a particular know point, Q-GIS has a lot of room for that. Go ahead and test it.

  Read the article

• Collation errors in business

  - by Rob Farley

  At the PASS Summit last month, I did a set (Lightning Talk) about collation, and in particular, the difference between the “English” spoken by people from the US, Australia and the UK. One of the examples I gave was that in the US drivers might stop for gas, whereas in Australia, they just open the window a little. This is what’s known as a paraprosdokian, where you suddenly realise you misunderstood the first part of the sentence, based on what was said in the second. My current favourite is Emo Phillip’s line “I like to play chess with old men in the park, but it can be hard to find thirty-two of them.” Essentially, this a collation error, one that good comedians can get mileage from. Unfortunately, collation is at its worst when we have a computer comparing two things in different collations. They might look the same, and sound the same, but if one of the things is in SQL English, and the other one is in Windows English, the poor database server (with no sense of humour) will get suspicious of developers (who all have senses of humour, obviously), and declare a collation error, worried that it might not realise some nuance of the language. One example is the common scenario of a case-sensitive collation and a case-insensitive one. One may think that “Rob” and “rob” are the same, but the other might not. Clearly one of them is my name, and the other is a verb which means to steal (people called “Nick” have the same problem, of course), but I have no idea whether “Rob” and “rob” should be considered the same or not – it depends on the collation. I told a lie before – collation isn’t at its worst in the computer world, because the computer has the sense to complain about the collation issue. People don’t. People will say something, with their own understanding of what they mean. Other people will listen, and apply their own collation to it. I remember when someone was asking me about a situation which had annoyed me. They asked if I was ‘pissed’, and I said yes. I meant that I was annoyed, but they were asking if I’d been drinking. It took a moment for us to realise the misunderstanding. In business, the problem is escalated. A business user may explain something in a particular way, using terminology that they understand, but using words that mean something else to a technical person. I remember a situation with a checkbox on a form (back in VB6 days from memory). It was used to indicate that something was approved, and indicated whether a particular database field should store True or False – nothing more. However, the client understood it to mean that an entire workflow system would be implemented, with different users have permission to approve items and more. The project manager I’d just taken over from clearly hadn’t appreciated that, and I faced a situation of explaining the misunderstanding to the client. Lots of fun... Collation errors aren’t just a database setting that you can ignore. You need to remember that Americans speak a different type of English to Aussies and Poms, and techies speak a different language to their clients.

  Read the article

• NServiceBus Generic Host and mqsvc.exe high CPU

  - by Michael Stephenson

  We have been doing some work with NServiceBus recently and observed some unusual behaviour which was caused by our mistake and seemed worthy of a small post.   The Scenario In our solution we were doing some standard NServiceBus stuff by pushing a message to a queue using NServiceBus.  We had a direct send/receive scenario rather than a publish/subscribe one.   The background process which was meant to collect the message and then process it was a normal NServiceBus message handler.  We would run the NServiceBus.Host.exe which would find the handler and then do the usual NServiceBus magic.   The Problem In this solution we were creating some automated tests around this module of the integration process to ensure that it would work well.  We had two tests.   Test 1 This test would start NServiceBus.Host.exe using the Process object, then seed a message to the queue via our web service façade sitting above the queue which wrapped NServiceBus.  The background process would then process the message and the test would check the message had been processed fine.   If all was well then the NServiceBus.Host.exe process was stopped.   Test 2 In test 2 we would do a very similar thing except that instead of starting the process the test would install NServiceBus.Host.exe as a windows service and then start the service before the test and once the test was executed it would stop the test.   The Results of the Tests Test 1 worked really well, however in test 2 we found that it didn’t really work at all, instead of doing the background process we were finding that between mqsvc.exe and NServiceBus.Host.exe the CPU on the machine was maxed and nothing was really happening.   The Solution After trying a few things we found it was the permissions on the queue were not set correctly.  Once this was resolved it all worked fine and CPU was not excessive and ran just like the console application.   I think the couple of take aways from this are:   Make sure you set the windows service for NserviceBus Generic Host to the right credentials When you install the generic host as a windows service then by default it will use the default windows credentials.  For any production like scenario you should be using a domain account to run the process as via the windows service. Make sure you have the queue set with the right permissions For the credentials you have used to configure the generic host as a windows service you should ensure that this user has the appropriate permissions for any queues it will interact with. Make sure you turn on the right logging configuration in NServiceBus When this wasnt working correctly we didnt know there was an issue, we were just experiencing the high CPU condition.  I am a little surprised that there wasnt something logged and that the process didnt crash.  I guess this could be by design bearing in mind that the process could be monitoring many queues.  In this point Im just saying that originally we didnt have all of the log4net logging which is available from NServiceBus turned on.  Its probably a good idea to have this turned on and configured until you are happy your solution is working fine.   Thanks to Ahmed Hashmi on my team who got this working in the end.

  Read the article

• Google TV Gets Bad Reception. Can Media Center Pull in the Signal?

  - by andrewbrust

  The news hit Monday morning that Google has decided to delay the release of its Google TV platform, and has asked its OEMs to delay any products that embed the software.  Coming just about two weeks prior to the 2011 Consumer Electronics Show (CES), Google’s timing is about the worst imaginable.  CES is where the platform should have had its coming out party, especially given all the anticipation that has built up since its initial announcement came 7 months ago. At last year’s CES, it seemed every consumer electronics company had fashioned its own software stack for Internet-based video programming and applications/widgets on its TVs, optical disc players and set top boxes.  In one case, I even saw two platforms on a single TV set (one provided by Yahoo and the other one native to the TV set). The whole point of Google TV was to solve this problem and offer a standard, embeddable platform.  But that won’t be happening, at least not for a while.  Google seems unable to get it together, and more proprietary approaches, like Apple TV, don’t seem to be setting the world of TV-Internet convergence on fire, either. It seems to me, that when it comes to building a “TV operating system,” Windows Media Center is still the best of a bad bunch.  But it won’t stay so for much longer without some changes.  Will Redmond pick up the ball that Google has fumbled?  I’m skeptical, but hopeful.  Regardless, here are some steps that could help Microsoft make the most of Google’s faux pas: Introduce a new Media Center version that uses XBox 360, rather than Windows 7 (or 8), as the platform.  TV platforms should be appliance-like, not PC-like.  Combine that notion with the runaway sales numbers for Xbox 360 Kinect, and the mass appeal it has delivered for Xbox, and the switch form Windows makes even more sense. As I have pointed out before, Microsoft’s Xbox implementation of its Mediaroom platform (announced and demoed at last year’s CES) gets Redmond 80% of the way toward this goal.  Nothing stops Microsoft from going the other 20%, other than its own apathy, which I hope has dissipated. Reverse the decision to remove Drive Extender technology from Windows Home Server (WHS), and create deep integration between WHS and Media Center.  I have suggested this previously as well, but the recent announcement that Drive Extender would be dropped from WHS 2.0 creates the need for me to a) join the chorus of people urging Microsoft to reconsider and b) reiterate the importance of Media Center-WHS integration in the context of a Google compete scenario. Enable Windows Phone 7 (WP7) as a Media Center client.  This would tighten the integration loop already established between WP7, Xbox and Zune.  But it would also counter Echostar/DISH Network/Sling Media, strike a blow against Google/Android (and even Apple/iOS) and could be the final strike against TiVO. Bring the WP7 user interface to Media Center and Kinect-enable it.  This would further the integration discussed above and would be appropriate recognition of WP7’s Metro UI having been built on the heritage of the original Media Center itself.  And being able to run your DVR even if you can’t find the remote (or can’t see its buttons in the dark) could be a nifty gimmick. Microsoft can do this but its consumer-oriented organization, responsible for Xbox, Zune and WP7, has to take the reins here, or none of this will likely work.  There’s a significant chance that won’t happen, but I won’t let that stop me from hoping that it does and insisting that it must.  Honestly, this fight is Microsoft’s to lose.

  Read the article

• The dislikes of TDD

  - by andrewstopford

  I enjoy debates about TDD and Brian Harrys blog post is no exception. Brian sounds out what he likes and dislikes about TDD and it's the dislikes I'll focus on. The idea of having unit tests that cover virtually every line of code that I’ve written that I have to refactor every time I refactor my code makes me shudder.  Doing this way makes me take nearly twice as long as it would otherwise take and I don’t feel like I get sufficient benefits from it. Refactoring your tests to match your refactored code sounds like the tests are suffering. Too many hard dependencies with no SOLID concerns are a sure fire reason you would do this. Maybe at the start of a TDD cycle you would need to do this as your design evolves and you remove these dependencies but this should quickly be resolved as you refactor. If you find your self still doing it then stop and look back at your design. Don’t get me wrong, I’m a big fan of unit tests.  I just prefer to write them after the code has stopped shaking a bit.  In fact most of my early testing is “manual”.  Either I write a small UI on top of my service that allows me to plug in values and try it or write some quick API tests that I throw away as soon as I have validated them. The problem with this is that a UI can make assumptions on your code that then just unit test around and very quickly the design becomes bad and you technical debt sweeps in. If you want to blackbox test your code with a UI then do so after your TDD cycles not before. This is probably by biggest issue with a literal TDD interpretation.  TDD says you never write a line of code without a failing test to show you need it.  I find it leads developers down a dangerous path.  Without any help from a methodology, I have met way too many developers in my life that “back into a solution”.  By this, I mean they write something, it mostly works and they discover a new requirement so they tack it on, and another and another and when they are done, they’ve got a monstrosity of special cases each designed to handle one specific scenario.  There’s way more code than there should be and it’s way too complicated to understand. I believe in finding general solutions to problems from which all the special cases naturally derive rather than building a solution of special cases.  In my mind, to do this, you have to start by conceptualizing and coding the framework of the general algorithm.  For me, that’s a relatively monolithic exercise. TDD is an development pratice not a methodology, the danger is that the solution becomes a mass of different things that violate DRY. TDD won't solve these problems, only good communication and practices like pairing will help. Above all else an assumption that TDD replaces a methodology is a mistake, combine it with what ever works for your team\business but only good communication will help. A good naming scheme\structure for folders, files and tests can help you and your team isolate what tests are for what.

  Read the article

• SWFObject and IE6 causing hair-pulling agony

  - by Piet

  I recently used SWFObject to display a flash header on a website. I chose SWFObject because: Instead of displaying an annoying ‘Install flash now’ message, it claims to be able to show alternate content. In this case: the original header image. It claims to be compatible with more or less every browser out there. Implementation went fine, until someone tested it on IE6 and got the following error: Internet explorer cannot open the Internet site http://www….. Operation aborted Which basically means that the site just can’t be visited with IE6 (still used a lot in business environments), it even seems as if there’s something wrong with your internet connection. Now, since about 10% of visitors to this site are still using IE6 (why does everyone still use Internet Explorer ???? Do YOU know that these days most people do NOT use Internet Explorer anymore ?) Now after some googling, I found the suggestion to defer loading of the SWFObject.js as follows: <script type="text/javascript" defer=”defer” src=”http://ajax.googleapis.com/ajax/libs/swfobject/2.2/swfobject.js” </script> <script type=”text/javascript” defer=”defer” swfobject.registerObject(”myId”, “9″, “”); </script> What this does according to W3C: When set, this boolean attribute provides a hint to the user agent that the script is not going to generate any document content (e.g., no “document.write” in javascript) and thus, the user agent can continue parsing and rendering. I don’t know exactly why, but: HURRAY! It works now!!! Only… IE6 and IE7 (didn’t try IE8) now gave the following error: Line: 19 Char: 1 Error: ’swfobject’ is undefined Code: 0 URL: http://www… But the flash was still running fine. Still, such an error isn’t clean, especially since almost half of the site’s visitors are using one of these Internet Explorer versions. Now, wanting a quick fix I decided to do the following: <script type="text/javascript" defer="defer" if (typeof(swfobject) != "undefined") swfobject.registerObject("myId", "9", ""); </script> I admit this is a bit of a weird ‘fix’. You’d suspect the flash to stop working on IE6/IE7, which it doesn’t. Not planning on diving into it’s inner bowels, I regard this a ‘mission accomplished’ until someone somewhere posts a better solution (for which I setup some Google alerts). Do you have a better solution? What would be the impact on the webdev economy (or your life) if all browsers were compatible? Addendum Because the above turned out not to work with the new Firefox 3.5.3 (strangely, was OK with 3.5.2 when I tested it) I decided to cut the crap and use the ‘Dynamic Publishing’ way. Ok, so it won’t work for people who have javascript disabled, but who on earth would have flash installed AND javascript disabled? To avoid the IE6 error with the ‘Dynamic Publishing’ way, I call swfobject.embedSWF right after the div that will be replaced with the flash content. Calling swfobject.embedSWF in the <head> would otherwise give me the above error in IE6 again.

  Read the article

• SQL – Quick Start with Admin Sections of NuoDB – Manage NuoDB Database

  - by Pinal Dave

  In the yesterday’s blog post we have seen that it is extremely easy to install the NuoDB database on your local machine. Now that the application is properly set up, let us explore NuoDB a bit more and get you familiar with the how it works and what the important areas of the NuoDB are that you should learn. As we have already installed NuoDB, now we will quickly start with two of the important areas in NuoDB: 1) Admin and 2) Explorer. In this blog post I will explore how the Admin Section of the NuoDB Console works.  In the next blog post we will learn how the Explorer Section works. Let us go to the NuoDB Console by typing the following URL in your browser: http://localhost:8080/ It will bring you to the following screen: On this screen you can see a big Start QuickStart button. Click on the button and it will bring you to following screen. On this screen you will find very important information about Domain and Database Settings. It is our habit that we do not read what is written on the screen and keep on clicking on continue without reading. While we are familiar with most wizards, we can often miss the very important message on the screen. Please note the information of Domain Settings and Database Settings from the following screen before clicking on Create Database. Domain Settings User: quickstart Password: quickstart Database Settings User: dba Password: goalie Database: test Schema: HOCKEY Once you click on the Create Database button it will immediately start creating sample database. First, it will start a Storage Manager and right after that it will start a Transaction Engine. Once the engine is up, it will Create a Schema and Sample Data. On the success of the creating the sample database it will show the following screen. Now is the time where we can explore the NuoDB Admin or NuoDB Explorer. If you click on Admin, it will first show following login screen. Enter for the username “domain” and for the password “bird”. Alternatively you can enter “quickstart”  twice for username and password.  It works as too. Once you enter into the Admin Section, on the left side you can see information about NuoDB and Admin Console and on the right side you can see the domain overview area. From this Administrative section you can do any of the following tasks: Create a view of the entire domain Add and remove databases Start and stop NuoDB Transaction Engines and Storage Managers Monitor transaction across all the NuoDB databases On the right side of the Admin Section we can see various information about a particular NuoDB domain. You can quickly view various alerts, find out information about the number of host machines that are provisioned for the domain, and see the number of databases and processes that are running in the domain. If you click on the “1 host” link you will be able to see various processes, CPU usage and other information. In the Processes Section you can see that there are two different types of processes. The first process (where you can see the floppy drive icon) represents a running Storage Manager process and the second process a running Transaction Engine process. You can click on the links for the Storage Manager and Transaction Engine to see further statistical details right down to the last byte of the data. There are various charts available for analysis as well. I think the product is quite mature and the user can add different monitor charts to the Admin section. Additionally, the Admin section is the place where you can create and manage new databases. I hope today’s tutorial gives you enough confidence that you can try out NuoDB and checkout various administrative activities with the database. I am personally impressed with their dashboard related to various counters. For more information about how the NuoDB architecture works and what a Storage Manager or Transaction Engine does, check out this short video with NuoDB CTO Seth Proctor:  In the next blog post, we will try out the Explorer section of NuoDB, which allows us to run SQL queries and write SQL code.  Meanwhile, I strongly suggest you download and install NuoDB and get yourself familiar with the product. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• asynchrony is viral

  - by Daniel Moth

  It is becoming hard to write code today without introducing some form of asynchrony and, if you are using .NET (e.g. for Windows Phone 8 or Windows Store apps), that means sooner or later you have to await something and mark your method as async. My most recent examples included introducing speech recognition in my Translator By Moth phone app where I had to await mySpeechRecognizerUI.RecognizeWithUIAsync() and when moving that code base to a Windows Store project just to show a MessageBox I had to await myMessageDialog.ShowAsync(). Any time you need to invoke an asynchronous method in your code, you have a choice to make: kick off the operation but don’t wait for it to complete (otherwise known as fire-and-forget), synchronously wait for it to complete (which will entail blocking, which can be bad, especially on a UI thread), or asynchronously wait for it to complete before continuing on with the rest of the method’s work. In most cases, you want the latter, and the await keyword makes that trivial to implement.  When you use the magical await keyword in front of an API call, then you typically have to make additional changes to your code: This await usage is within a method of course, and now you have to annotate that method with async. Furthermore, you have to change the return type of the method you just annotated so it returns a Task (if it previously returned void), or Task<myOldReturnType> (if it previously returned myOldReturnType). Note that if it returns void, in some cases you could cheat and stop there. Furthermore, any method that called this method you just annotated with async will now also be invoking an asynchronous operation, so you have to make that change in the body of the caller method to introduce the await keyword before the call to the method. …you guessed it, you now have to change this caller method to be annotated with async and have its return types tweaked... …and it goes on virally… At some point you reach the root of your user code, e.g. a GUI event handler, and whoever calls that void method can already deal with the fact that you marked it as async and the viral introduction of the keywords stops there… This is all wonderful progress and a very powerful mechanism, and I just wish someone had written a refactoring tool to take care of this… anyone? I mentioned earlier that you have a choice when invoking an asynchronous operation. If the first time you encounter this you wish to localize the impact of all these changes and essentially try to turn the asynchronous behavior into synchronous by blocking - don't! For reasons why you don't want to do that, read Toub's excellent blog post (and check out the rest of his blog with gems on async programming starting with the Async FAQ). Just embrace the pattern knowing that when you use one instance of an await, you'll propagate the change all the way to the root user code method, e.g. typically an event handler. Related aside: I just finished re-writing my MessageBox wrapper class for Phone projects, including making it work in Windows Store projects, and it does expect you to use it with an await :-). I'll share that in an upcoming post for those of you that have the same need… Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Auto-cancel reason not found (6, 13906)

  - by Rajesh Sharma

  There are many errors in the application which are never invoked because of appropriate application configuration done at the time of implementation by the solution architects. So typically, as an application end user you would never stumble upon such errors. But what if the application administrator inadvertently changes the configuration/setup in the development, test, QA, or production environment? This is the time when you as an end user are introduced to a brand-new error for which you may not have a clue or understanding to what it means and neither the access/privilege to rectify it.    In this post we'll focus on one such error '6, 13906 - Auto-cancel reason not found'.   You get this error if you have not defined a Bill (Segment) Cancel Reason (Admin Menu, B, Bill Cancel Reason) code with System Default value of Turn off auto-cancel.   Consider a scenario when you are about to final bill an 'Account' for which the bill period's cut-off date you selected is falling on or after the Service Agreement's (SA) end/stop date (basically SA is Stopped with a date earlier than it was billed previously). And for the same 'Account' either: Bill segments exists that end after the SA's end date OR Non-closing bill segments exists that end on the SA's end date (OR closing bill segments that do not end on SA's end date or do not exist at all - remember closing/final bill segment is generated if the SA is in Stopped status).   CC&B detects such scenario and attempts to cancel all such violating bill segments automatically, but NOT if you are generating the bill Online. If online, the system assumes that you know what you are doing, and prompts you with error 2, 13716 - Bill segments that violate the SA (%1) End Date (%2) exist to take necessary action.   If in batch, system automatically cancels these kinds of bill segment(s).   Since this happens in the background, you have to define within the application which System Default Bill (Segment) cancellation reason code identified as Turn off auto-cancel, should be used by the process when it attempts to cancel any such violating bill segments (You already know that you cannot cancel a bill segment without giving a reason for cancellation).   So what exactly happens during batch billing?   Bill Segment generation routine at first determines billing eligibility of the service agreement being billed. One of the billing eligibility criteria is to check the SA's previous bill segments which have end dates greater than the current cut-off date/end date. Technically, the routine retrieves a count of such violating bill segments.     SELECT COUNT (*) FROM CI_BSEG WHERE SA_ID = :SA-ID AND BSEG_STAT_FLG = '50' -- Frozen AND END_DT IS NOT NULL AND (END_DT > '03-JUN-2010' -- Bill segment greater than SA's End Date OR OR (END_DT = '03-JUN-2010' AND CLOSING_BSEG_SW = 'N')) -- Non-closing bill segment ending on SA's end date   If the count is greater than zero, Bill segment generation routine executes another program to auto-cancel such bill segments. Auto-cancel program retrieves the 'Bill Cancel Reason' code which is identified as Turn off auto-cancel. Retrieved cancel reason code is then placed on the bill segments that are being cancelled automatically.   During this process if the routine fails to determine the bill cancel reason code having System Default Turn off auto-cancel because it was not been configured, you get a bill exception 6, 13906 - Auto-cancel reason not found.   Also note that duplicate or multiple System Default codes identified as Turn off auto-cancel are not allowed. CC&B would complain with an error 2, 54201.   Duplicate validation/check is also performed within Auto-cancel routine, if suppose for test purposes you executed a DML statement updating CI_BILL_CAN_RSN.BSCAN_SYS_DFLT_FLG with a value 'T'.

  Read the article

• Juju stuck in "pending" state when using LXC

  - by Andre

  So I'm trying to get started with Juju, and tried to do this locally using LXC. I followed the instructions here: How do I configure juju for local usage? Unfortunately this doesn't seem to work for me. status shows the following: $ juju status machines: 0: agent-state: running dns-name: localhost instance-id: local instance-state: running services: mysql: charm: cs:precise/mysql-1 relations: db: - wordpress units: mysql/0: agent-state: pending machine: 0 public-address: null wordpress: charm: cs:precise/wordpress-0 exposed: true relations: db: - mysql units: wordpress/0: agent-state: pending machine: 0 open-ports: [] public-address: null 2012-05-10 14:09:38,155 INFO 'status' command finished successfully As you can see the agent-state is 'pending' and there is no public address where I'm able to access the newly created site. Am I missing something here? UPDATE: Tried destroying the environment an doing everything again (multiple times). This is the output for debug-log: ~$ juju debug-log 2012-05-11 08:50:23,790 INFO Enabling distributed debug log. 2012-05-11 08:50:23,806 INFO Tailing logs - Ctrl-C to stop. 2012-05-11 08:50:42,338 Machine:0: juju.agents.machine DEBUG: Units changed old:set([]) new:set(['mysql/0']) 2012-05-11 08:50:42,339 Machine:0: juju.agents.machine DEBUG: Starting service unit: mysql/0 ... 2012-05-11 08:50:42,459 Machine:0: unit.deploy DEBUG: Downloading charm cs:precise/mysql-1 to /home/andre/.juju/data/andre-local/charms 2012-05-11 08:50:42,620 Machine:0: unit.deploy DEBUG: Using <juju.machine.unit.UnitContainerDeployment object at 0x9c54b6c> for mysql/0 in /home/andre/.juju/data/andre-local 2012-05-11 08:50:42,648 Machine:0: unit.deploy DEBUG: Starting service unit mysql/0... 2012-05-11 08:50:42,649 Machine:0: unit.deploy DEBUG: Creating master container... 2012-05-11 08:54:33,992 Machine:0: unit.deploy DEBUG: Created master container andre-local-0-template 2012-05-11 08:54:33,993 Machine:0: unit.deploy INFO: Creating container mysql-0... 2012-05-11 08:56:18,760 Machine:0: unit.deploy INFO: Container created for mysql/0 2012-05-11 08:56:19,466 Machine:0: unit.deploy DEBUG: Charm extracted into container 2012-05-11 08:56:19,569 Machine:0: unit.deploy DEBUG: Starting container... 2012-05-11 08:56:22,707 Machine:0: unit.deploy INFO: Started container for mysql/0 2012-05-11 08:56:22,707 Machine:0: unit.deploy INFO: Started service unit mysql/0 2012-05-11 08:56:23,012 Machine:0: juju.agents.machine DEBUG: Units changed old:set(['mysql/0']) new:set(['wordpress/0', 'mysql/0']) 2012-05-11 08:56:23,039 Machine:0: juju.agents.machine DEBUG: Starting service unit: wordpress/0 ... 2012-05-11 08:56:23,154 Machine:0: unit.deploy DEBUG: Downloading charm cs:precise/wordpress-0 to /home/andre/.juju/data/andre-local/charms 2012-05-11 08:56:23,396 Machine:0: unit.deploy DEBUG: Using <juju.machine.unit.UnitContainerDeployment object at 0x9c519cc> for wordpress/0 in /home/andre/.juju/data/andre-local 2012-05-11 08:56:23,620 Machine:0: unit.deploy DEBUG: Starting service unit wordpress/0... 2012-05-11 08:56:23,621 Machine:0: unit.deploy INFO: Creating container wordpress-0... 2012-05-11 08:58:24,739 Machine:0: unit.deploy INFO: Container created for wordpress/0 2012-05-11 08:58:25,163 Machine:0: unit.deploy DEBUG: Charm extracted into container 2012-05-11 08:58:25,397 Machine:0: unit.deploy DEBUG: Starting container... 2012-05-11 08:58:27,982 Machine:0: unit.deploy INFO: Started container for wordpress/0 2012-05-11 08:58:27,983 Machine:0: unit.deploy INFO: Started service unit wordpress/0 This is the result for the status command (with verbose flag): ~$ juju -v status 2012-05-11 08:51:53,464 DEBUG Initializing juju status runtime 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@658: Client environment:zookeeper.version=zookeeper C client 3.3.5 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@662: Client environment:host.name=andre-ufo 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@669: Client environment:os.name=Linux 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@670: Client environment:os.arch=3.2.0-24-generic-pae 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@671: Client environment:os.version=#37-Ubuntu SMP Wed Apr 25 10:47:59 UTC 2012 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@679: Client environment:user.name=andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@687: Client environment:user.home=/home/andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@699: Client environment:user.dir=/home/andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@zookeeper_init@727: Initiating client connection, host=192.168.122.1:41779 sessionTimeout=10000 watcher=0xb7780620 sessionId=0 sessionPasswd=<null> context=0x9242ee8 flags=0 2012-05-11 08:51:53,627:4030(0xb6b90b40):ZOO_INFO@check_events@1585: initiated connection to server [192.168.122.1:41779] 2012-05-11 08:51:53,649:4030(0xb6b90b40):ZOO_INFO@check_events@1632: session establishment complete on server [192.168.122.1:41779], sessionId=0x1373ae057d90007, negotiated timeout=10000 2012-05-11 08:51:53,651 DEBUG Environment is initialized. machines: 0: agent-state: running dns-name: localhost instance-id: local instance-state: running services: mysql: charm: cs:precise/mysql-1 relations: db: - wordpress units: mysql/0: agent-state: pending machine: 0 public-address: null wordpress: charm: cs:precise/wordpress-0 relations: db: - mysql units: wordpress/0: agent-state: pending machine: 0 public-address: null

  Read the article

• Watch Netflix Instant Movies in Boxee

  - by DigitalGeekery

  Boxee is multi-platform Media PC application with a host of media applications. One of which is the popular Movie service, Netflix. Today we’ll show you how to get setup to watch Netflix Instant streaming video in Boxee. Note: Nexflix requires Microsoft Silverlight which unfortunately means Boxee users running Linux out of luck. What You’ll Need A Netflix account Authorize your Netflix account with Boxee Install Microsoft Silverlight Authorize Your Netflix Account First, we need to authorize our Netflix account with Boxee. (See link below). Type in your Boxee username and password and click “Login.”  When prompted, click “Authorize.”   Click “Yes, Link This Account.”    Install Silverlight If you don’t already have Silverlight installed, you’ll need to do so. See the download link at the end of the article.   Log into Boxee Now we’re ready to log into Boxee. Once logged in, click on “Apps” on the Home screen.   From the My Apps screen click on Netflix. Then click “Start.” Click “Yes” to enable the cookie.   Now you’ll enter the Netflix App. From here, you can browse your Instant Queue, Recommendations, New Arrivals, Browse Genre, or Search for available titles.   Click on a selection you’d like to watch. From here, you can Play, Rate, or even add the title to your regular Netflix Queue.   With a remote or the on-screen controls you can pause, stop, play, and skip forward or back through the video.   Now you’re all set to enjoy the Netflix Instant library with Boxee. Netflix Instant is one of many great Apps included with Boxee. While the current available selection isn’t exactly overwhelming, most subscribers will likely find enough to keep themselves entertained in between DVD deliveries. Haven’t tried Boxee yet? Check out our article on getting started with Boxee. Links Authorize your Netflix account with Boxee Install Microsoft Silverlight Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Find Movies and TV Based on your Mood with JinniGetting Started with BoxeeQuickly Find Movies to Watch at Hello MoviesIntegrate Boxee with Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer

  Read the article

• Visual Studio 2010 SP1

  - by ScottGu

  Last week we shipped Service Pack 1 of Visual Studio 2010 and the Visual Studio Express Tools.  In addition to bug fixes and performance improvements, SP1 includes a number of feature enhancements.  This includes improved local help support, IntelliTrace support for 64-bit applications and SharePoint, built-in Silverlight 4 Tooling support in the box, unit testing support when targeting .NET 3.5, a new performance wizard for Silverlight, IIS Express and SQL CE Tooling support for web projects, HTML5 Intellisense for ASP.NET, and more.  TFS 2010 SP1 was also released last week, together with a new TFS Project Server Integration Pack and Load Test Feature Pack.  Brian Harry has a good blog post about the TFS updates here. VS 2010 SP1 Download Click here to download and install SP1 for all versions of Visual Studio (including express).  This installer examines what you have installed on your machine, and only downloads the servicing downloads necessary to update them to SP1.  The time it takes to download and update will consequently depend on what all you have installed.  Jon Galloway has a good blog post on tips to speed up the SP1 install by uninstalling unused components. Web Platform Installer Bundles In addition to the core VS 2010 SP1 installer, we have also put together two Web Platform Installer (WebPI) bundles that automate installing SP1 together with additional web-specific components: VS 2010 SP1 WebPI Bundle Visual Web Developer 2010 SP1 WebPI Bundle The above WebPI bundles automate installing: VS 2010/VWD 2010 SP1 ASP.NET MVC 3 (runtime + tools support) IIS 7.5 Express SQL Server Compact Edition 4.0 (runtime + tools support) Web Deployment 2.0 Only the components that are not already installed on your machine will be downloaded when you use the above WebPI bundles.  This means that you can run the WebPI bundle at any time (even if you have already installed SP1 or ASP.NET MVC 3) and not have to worry about wasting time downloading/installing these components again. Earlier this year I did two posts that discussed how to use IIS Express and SQL CE with ASP.NET projects in SP1.  Read the below posts to learn more about how to use them after you run the above bundles: Visual Studio 2010 SP1 and IIS Express Visual Studio 2010 SP1 and SQL CE for ASP.NET The above feature additions work with any web project type – including both ASP.NET Web Forms and ASP.NET MVC. Additional SP1 Notes Two additional notes about VS 2010 SP1: 1) One change we made between RTM and SP1 is that by default Visual Studio now uses software rendering instead of hardware acceleration when running on Windows XP.  We made this change because we’ve seen reports of (often inconsistent) performance issues caused by older video drivers.  Running in software mode eliminates these and delivers consistent speeds.  You can optionally re-enable hardware acceleration with SP1 using Visual Studio’s Tools->Options menu command – we did not remove support for HW acceleration on XP, we simply changed the default setting for it.  Jason Zander has written more details on the change and how to re-enable HW acceleration inside VS here. 2) We have discovered an issue where installing SP1 can cause TSQL intellisense within SQL Server Management Studio 2008 R2 to stop working (typing still works – but intellisense doesn’t show up).  The SQL team is investigating this now and I’ll post an update on how to fix this once more details are known.  Hope this helps, Scott P.S. I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Clustering for Mere Mortals (Pt2)

  - by Geoff N. Hiten

  Planning. I could stop there and let that be the entirety post #2 in this series.  Planning is the single most important element in building a cluster and the Laptop Demo Cluster is no exception.  One of the more awkward parts of actually creating a cluster is coordinating information between Windows Clustering and SQL Clustering.  The dialog boxes show up hours apart, but still have to have matching and consistent information. Excel seems to be a good tool for tracking these settings.  My workbook has four pages: Systems, Storage, Network, and Service Accounts.  The systems page looks like this:   Name Role Software Location East Physical Cluster Node 1 Windows Server 2008 R2 Enterprise Laptop VM West Physical Cluster Node 2 Windows Server 2008 R2 Enterprise Laptop VM North Physical Cluster Node 3 (Future Reserved) Windows Server 2008 R2 Enterprise Laptop VM MicroCluster Cluster Management Interface N/A Laptop VM SQL01 High-Performance High-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM SQL02 High-Performance Standard-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM SQL03 Standard-Performance High-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM Note that everything that has a computer name is listed here, whether physical or virtual. Storage looks like this: Storage Name Instance Purpose Volume Path Size (GB) LUN ID Speed Quorum MicroCluster Cluster Quorum Quorum Q: 2     SQL01Anchor SQL01 Instance Anchor SQL01Anchor L: 2     SQL02Anchor SQL02 Instance Anchor SQL02Anchor M: 2     SQL01Data1 SQL01 SQL Data SQL01Data1 L:\MountPoints\SQL01Data1 2     SQL02Data1 SQL02 SQL Data SQL02Data1 M:\MountPoints\SQL02Data1       Starting at the left is the name used in the storage array.  It is important to rename resources at each level, whether it is Storage, LUN, Volume, or disk folder.  Otherwise, troubleshooting things gets complex and difficult.  You want to be able to glance at a resource at any level and see where it comes from and what it is connected to. Networking is the same way:   System Network VLAN  IP Subnet Mask Gateway DNS1 DNS2 East Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 East Heartbeat Cluster2   255.255.255.0       West Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 West Heartbeat Cluster2   255.255.255.0       North Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 North Heartbeat Cluster2   255.255.255.0       SQL01 Public Cluster1 10.97.230.x(DHCP) 255.255.255.0       SQL02 Public Cluster1 10.97.230.x(DHCP) 255.255.255.0       One hallmark of a poorly planned and implemented cluster is a bunch of "Local Network Connection #n" entries in the network settings page.  That lets me know that somebody didn't care about the long-term supportabaility of the cluster.  This can be critically important with Hyper-V Clusters and their high NIC counts.  Final page:   Instance Service Name Account Password Domain OU SQL01 SQL Server SVCSQL01 Baseline22 MicroAD Service Accounts SQL01 SQL Agent SVCSQL01 Baseline22 MicroAD Service Accounts SQL02 SQL Server SVC_SQL02 Baseline22 MicroAD Service Accounts SQL02 SQL Agent SVC_SQL02 Baseline22 MicroAD Service Accounts SQL03 (Future) SQL Server SVC_SQL03 Baseline22 MicroAD Service Accounts SQL03 (Future) SQL Agent SVC_SQL03 Baseline22 MicroAD Service Accounts             Installation Account           administrator            Yes.  I write down the account information.  I secure the file via NTFS, but I don't want to fumble around looking for passwords when it comes time to rebuild a node. Always fill out the workbook COMPLETELY before installing anything.  The whole point is to have everything you need at your fingertips before you begin.  The install experience is so much better and more productive with this information in place.

  Read the article

• CRMIT’s HIGH VALUE CRM++ PLUGINS FOR CRM On DEMAND

  - by Soumo Das

  Customer satisfaction and experience being the two most considerable factors, these days businesses are on the lookout for automation tools that are world class, agile and keep quality at its core. CRMIT has developed such tools using cutting edge technologies and abstracting industry best practices and R&D.  Self Service Portal  With customers being so meticulous about regular updates and reliable access to their data, administrators just cannot think of walking a thin line. Surviving without a resource that provides a track of customer requirements for services available 24 x 7 can severely affect the productivity. In such a scenario, CRMIT’s Self Service Portal (SSP) is the best solution. This not only tracks the required customer data, but also allows companies to stay in tune with their employees, vendors and stakeholders.   One can directly sign up to become a CRMOD contact and SSP user. One need not use the database, as operations and interactions are d at run time. This is a fully configurable solution that tracks results periodically, thus making it easy for end users. It also offers better security and data visibility that enables users to progress smoothly. Quote and Order Management   When dealing with quotes, contracts and orders becomes complicated, only Quote & Order Management can work as a one-stop solution. CRMIT offers this great tool for managing all this information and for taking care of customer orders and service requirements.  This CRM On Demand plug-in allows one to create a new quote or copy the existing one. Products can be directly added from the product list of CRMOD and the pricing is calculated automatically. Quote can be generated and mailed to the external users in PDF, HTML and XLS formats. This not only allows management of quotes in an enhanced manner, but also supports various billing and tax calculation features that make work effortless.    Report Scheduler  When it comes to analyzing and providing statistics of various business processes currently running in an organization, one cannot depend on manual updates, which sometimes may be inaccurate or even delayed. CRMIT provides a SaaS based powerful solution - Report Scheduler - that allows CRM users to schedule reports as per the frequencies and then receive them as email attachments at the scheduled time.   With this powerful tool, administrators can control the report scheduler for assigning specific reports to specific users. After that, users can login and schedule any assigned report for viewing at particular intervals on monthly, weekly or daily basis. Additionally, users can also copy the mail to external users and can choose the preferred format. The best part is that sharing business data with third party become easy with this and for viewing reports, users need not log into their CRMOD account.  CRM On Demand Offline Solution CRM On-Demand Offline is another great CRM++ extension that allows one to work in both online and offline modes. Synchronizing both the modes is absolutely easy and offers ease while working. CRM OD offline works as an automation tool that not only improves efficiency, but also works as a backup in most cases. It is readily available as a windows application installer and requires users to be online only while validating and synchronizing. The best part is that working in the offline mode also works as a backup. 

  Read the article

< Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >