Search Results

Search found 14816 results on 593 pages for 'logical model'.

Page 293/593 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• Ubuntu server: lost prompt on monitor

  - by Richard

  Hello All, I am running Ubuntu 9.04 server edition. I have a monitor plugged into the box for occasional admin tasks. I pulled out a USB disk (without unmounting) and the screen is now full with this message: Buffer I/O error on device sdc1, logical block 7778778 I can't seem to clear the screen or get a prompt back. Doesn't appear to be registering keyboard strokes. The box is still running fine (I can ssh in from elsewhere and evrything is running as normal). Any ideas on how to clear screen and get my prompt back?

  Read the article

• Thinkpad Edge e320 thermal sensors description

  - by koressak

  I have a quite specific question concerning description of thermal sensors of my notebbok Thinkpad Edge E320. I have a debian linux installed with lm_sensors package and running command sensors show eight different values without any description of course (temp1 through temp6). I would like to know which one is which (cpu, gpu, hdd, etc.) Using google I didn't find any specific material concerning this exact model. Coult someone point me in the right direction? Thank you in advance.

  Read the article

• I have 2 identical windows 2008 r2 servers with 32G RAM, one shows "Installed Memory(Ram): 32.0GB" a

  - by c0m4

  the server model: HP Poliant DL160 G5, both servers have identical product ID. for some reason one of the servers have 4GB ram reserved. it shows in the memory tab on the Resource monitor as "Hardware Reserved". I've googled it a bit and found some post related to msconfig boot parameters (but mine are properly set) and some post related to memory remap option in the bios but it is not available in my servers bios so in a bit lost... help?

  Read the article

• mysql single database relocation

  - by asdmin

  I would like to know if it's possible to operate different databases on different filesystem locations. Background: we are a hosting service, which hosts mysql, web, and smtp to it's customer, but all our services (sql, smtp, http) are located in a different place. We are going to assign a single logical volume to a customer, which will accommodate the customer's mailing, weppages and (hopefully) sql database. Web pages and mailing are already covered, but I am not able to find a configuration setting which would enable me to specify the location of a database (the directory where mysql stores the DB). Let me please highlight, the target here is to relocate different databases to different locations in the filesystem, not moving them from a single place to an another (single) place. Also please do not bother answering with soft and hard symbolic links. ;) Thanks

  Read the article

• University Assignment: Datacenter/Networking Infrastructure for Hosting Company [closed]

  - by TCB13

  My university assigned me to theorizing a data center for an Web Hosting company. The company should provide the following services: Shared WebHosting; Dedicated Servers; VPS (Virtual Private Server); The bandwith (as resquested) is limited to 10 Gbps. Is there any good book / other info I can read (max 100 pages) about how to design a good data center for hosting, what are the best practices and what should be done from a (logical) network perspective, what security policies should be implemented and how the data center should be built (physically)? Thank you ;)

  Read the article

• How do you debug why Windows is slow?

  - by aaron

  I've got Vista Biz and when my machine chugs I think it is because of paging, but I never know how to verify this. Procexp doesn't seem to provide useful information because it appears that nothing is going on when the chugs happen. perfmon seems like it has the counters I need, but I'm never sure what counters I should add to cover the information I want. For perfmon, I prefer numbers that are percents, so I can gauge load. Here are the counters I have up, but they don't always seem to correlate to chugs: - % disk time (logical) - page faults/sec (an indicator of lots of paging activity) - processor/%priviliged time

  Read the article

• Wifi Snooping over phone

  - by pulsarjune

  I connect to the wifi acccess-point at work, but recently I suspect that data on my phone is being snooped-out from my phone connected to my office's Wifi network. [Phone Model: Sony Ericsson Xperia Neo V, Android v2.3; Wifi accespoint: Belkin G] How can i check my suspicion? Or What are the ways i could get over them? (obviously i want to stay connected to the wifi n/w) Any thoughts on these points?

  Read the article

• Any free Mind Mapping programs out there?

  - by Axxmasterr

  I am looking for a free Mind Mapping package to model a few things. Any good recommedations?

  Read the article

• How to interpret IOZone results?

  - by homer5439

  Here are the resuts of running IOZone on an ext3 filesystem on an LVM volume residing on a SAN LUN (it was ran with 5 parallel processes). "Throughput report Y-axis is type of test X-axis is number of processes" "Record size = 4 Kbytes " "Output is in Kbytes/sec" " Initial write " 81628.55 " Rewrite " 83354.72 " Read " 115595.02 " Re-read " 119306.09 " Reverse Read " 47684.20 " Stride read " 10011.09 " Random read " 16751.27 " Mixed workload " 5659.77 " Random write " 1661.85 " Pwrite " 36030.83 Now this is all nice and dandy, but my question is: how do I know whether the values are as good as they could be or there is something to tweak (and if so, what?) The actual usage I will have for that Logical Volume is to act as virtual disk for a VM.

  Read the article

• What desktop boards support VT-D or IOMMU?

  - by Jeff Shattock

  I'm looking for a desktop board that supports either VT-D (Intel) or IOMMU (AMD) technology. This is the IO virtualization technology, not VT-x for CPU virtualization. I've found a list of chipsets that are purported to have this, but every board I look at, the vendor has decided to not support that feature. I would really prefer a desktop board over a server board for this. Does anyone have a specific model that is known to support this technology?

  Read the article

• does the *physical* order/location of drives in a mdadm-managed RAID-10 array matter?

  - by locuse

  i've setup a 4-drive RAID-10 array using mdadm-managed, software-raid on an x86_64 box. it'd up & running and works as expected, cat /proc/mdstat md127 : active raid10 sdc2[2] sdd2[3] sda2[0] sdb2[1] 1951397888 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU] bitmap: 9/466 pages [36KB], 2048KB chunk atm the four SATA drives are physically plugged into the motherboard's 1st four SATA ports. i'd like to gather the necessary/complete info for catastrophic recovery. reading starting here, http://neil.brown.name/blog, and the mailing list, i'm not yet completely confident i have it right. i understand 'drive order matters'. is that logical, &/or physical order that matters? if i unplugged the four drives in this array, and plugged them each back into different ports on the motherboard or a pci card, as long as i've changed nothing in software config, will the array correctly auto-re-assemble?

  Read the article

• let mysql use full resources

  - by shekhar

  We have a Windows server 2008 R2. It has 24GB RAM and 2.926 Mhz, 8 Core(s), 8 Logical Process. We have a large MySQL database and it's taking a lot of time to execute some queries. But while running queries, I have observed it's NOT utilizing full resources. I am thinking that if I let MySQL utilize maximum resources on my server, it can reduce execution time. How can I let my MySQL server utilize maximum resources in a healthy way?

  Read the article

• How can I make my livebox route to my external IP address for a computer in the DMZ?

  - by Noli

  I have a sagem livebox 2 (Fiber optic model), and have placed my computer in a DMZ. People from outside of my network can access my comp fine via its external dyndns.org address, yet when I try to call the public dyndns.org address from inside my network, I get redirected to the internal admin site on the router. How can I make it so that I can see my comp from the public address like everyone else? What kinds of questions should I be asking or looking into? Thanks

  Read the article

• Is email forwarding to the sender's address usually blocked in Mail servers / MTA ?

  - by codecowboy

  I've noticed that email forwarding to an address seems not to work if I send an email from the address to which I am forwarding email. This happens for GMail and Fasthosts mail servers. e.g I send an email to [email protected] from [email protected] , [email protected] is set to forward to [email protected] and the email never arrives. I realise this seems logical but it is a potential cause of confusion when testing email functionality in a web application (for me, anyway ;-). I would just like to know if this is standard for all MTA software so I can avoid confusing myself.

  Read the article

• Various problems with software raid1 array built with Samsung 840 Pro SSDs

  - by Andy B

  I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

  Read the article

• RewriteRule applying pattern even though 1 of the RewriteCond's failed

  - by BHare

  #www. domain . tld RewriteCond %{HTTP_HOST} (?:.*\.)?([^.]+)\.(?:[^.]+)$ RewriteCond /home/%1/ -d RewriteRule ^(.+) %{HTTP_HOST}$1 RewriteRule (?:.*\.)?([^.]+)\.(?:[^.]+)/media/(.*)$ /home/$1/client/media/$2 [L] RewriteRule (?:.*\.)?([^.]+)\.(?:[^.]+)/(.*)$ /home/$1/www/$2 [L] Here is rewritelog output: #(4) RewriteCond: input='tfnoo.mydomain.org' pattern='(?:.*\.)?([^.]+)\.(?:[^.]+)$' [NC] => matched #(4) RewriteCond: input='/home/mydomain/' pattern='-d' => not-matched #(3) applying pattern '(?:.*\.)?([^.]+)\.(?:[^.]+)/media/(.*)$' to uri 'http://www.mydomain.org/files/images/logo.png' #(3) applying pattern '(?:.*\.)?([^.]+)\.(?:[^.]+)/(.*)$' to uri 'http://www.mydomain.org/files/images/logo.png' #(2) rewrite 'http://www.mydomain.org/files/images/logo.png' -> '/home/mydomain/www/logo.png' If you note on the 2nd 4 it failed the -d (if directory exists) pattern. Which is correct. mydomain does not have a /home/. Therefore it should never rewrite, atleast according to my understanding that all rewriterules are subject to rewriteconds as logical ANDs.

  Read the article

• I am building a computer, will these components work? [closed]

  - by david

  Case: Coolermaster HAF 912 Graphic card: Sapphire RADEON HD 6850 Optical Drive: SONY SATA DVD-ROM PSU: Corsair CX500 RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBXL Motherboard: MSI Z77A-G43 Processor: Intel core i3 2120 Still don't know which harddrive to use, neither if i should buy a cpu cooler fan... so if you can help me, please

  Read the article

• No WiFi networks - Fujitsu Lifebook on Windows 7

  - by Sergey Osypchuk

  I lost ability to see WiFi networks on my laptop. I already tryied: reinstall wifi driver reboot disable/enable from windows and from bios check for latest driver both by Windows and Fukitsu driver update When i Use windows Network Diagnostic, I am getting recomendation "Turn on Wireless capability". There is no switch or keyboard combination for this laptop model (or I do not know any one). Any ideas?

  Read the article

• How can I make photo CDs from iPhoto

  - by Jody M

  I have a new Macbook, don't know the OS, but just got it--it's the cheaper model. I saved a lot of photos on iPhoto and can't figure out how to burn a CD. Tried the "share" function and when I choose a location to save the photos and hit burn, get an error message that says can't create in that location. Needs to be run on a pc or photo processing place.

  Read the article

• Modelling interiors with Google Sketchup PhotoMatching

  - by rzlines

  I have come across multiple tutorials explaining how to model structures with Google SketchUp. Are there any tutorial series explaining how to do interiors using Photo Matching and multiple photos. The tutorial should ideally cover the entire process, including the right way to take the photos of the place to modelling the furniture and the walls. Does anyone know of any video series or any literature on the same. Please direct me to the right place

  Read the article

• vista issue with shift key

  - by Mr New

  for some reason when i press the shift key on my laptop keyboard is mapped to 'ctrl+v' which does a paste. i thought it was the keyboard but then i replaced it with a wireless one,it still gives me the same issue. can someone help me. i cant just turn off the shift key all together because i do need it at times. model 8510w; vista operating system

  Read the article

• Specifying Multiplicity in a Visio Database (ERD) Diagram

  - by Nitrodist

  Is there a way to manually edit the cardinality/multiplicity symbols on the end of a database ERD made in Visio? The category I'm using is in Visio 2003 under Database -> Database Model Diagram I want to be able to go from something like this: To this: The second graphic was done by manually adding the numbers, but I would prefer to just do it in Visio. Is there any way of accomplishing this?

  Read the article

• NTFS write speed really slow (<15MB/s)

  - by Zulakis

  I got a new Seagate 4TB harddrive formatted with ntfs using parted /dev/sda > mklabel gpt > mkpart pri 1 -1 mkfs.ntfs /dev/sda1 When copying files or testing writespeed with dd, the max writespeed I can get is about 12MB/s. The harddrive should be capable of atleast 100MB/s. top shows high cpu usage for the mount.ntfs process. The system has a AMD dualcore. This is the output of parted /dev/sda unit s print: Model: ATA ST4000DM000-1F21 (scsi) Disk /dev/sda: 7814037168s Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 2048s 7814035455s 7814033408s pri The used kernel is 3.5.0-23-generic. The ntfs-3g versions I tried are ntfs-3g 2012.1.15AR.1 (ubuntu 12.04 default) and the newest version ntfs-3g 2013.1.13AR.2. When formatted with ext4 I get good write speeds with about 140MB/s. How can I fix the writespeed?

  Read the article

• Is Lenovo T410 capable of supporting two external monitors at 1080x1920?

  - by Bo Tian

  I'm interested in the model with nVidia NVS3100M graphics, and I'd like to connect to two external monitors, one via VGA and another via DisplayPort. Will it be able to support 1080x1920 (both rotated 90 degrees) on both monitors? Also, if I decide to add a third monitor, will it be able to support three through a dock? Thanks.

  Read the article

• LVM, Soft RAID1, and Replication?

  - by mtkoan

  Hi all, I am practicing putting together a HA file server. It is a linux server with 2 1.5TB Hard drives. My plan is to use LVM to manage the physical volumes into logical volumes for /, /home, and /var. Then use md (soft RAID 1) to mirror the image onto the second HDD, THEN use DRDB to mirror the entire setup another server. Is this overkill? Would I just be okay with just md and DRDB? The system will serve user's homedirs (~100) and probably some groupware or other local intranet. On my own machines I've always separated root and /home partitions in case I break something, I can easily reinstall the OS. Should I follow that same theory here? If so I need LVM, because I really can't predict where we'll need more space, /var or /home.

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >