Search Results

Search found 14356 results on 575 pages for 'personal info'.

Page 293/575 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300 | Next Page >

connecting to redis from wsgi application

- by W_P

I am running redis and httpd with mod_wsgi on the same server. I have a wsgi application using a virtualenv and the follow virtualhost conf: WSGIPythonPath /var/www/wsgi <VirtualHost *:80> ServerName test.example.com DocumentRoot /var/www/html WSGIScriptAlias / /var/www/wsgi/myapp/app.wsgi CustomLog logs/test.example.com-access-log common ErrorLog logs/test.example.com-error-log <Directory /var/www/wsgi/myapp> Order allow,deny Allow from all WSGIScriptReloading On </Directory> </VirtualHost> I have a sites.pth in my /var/www/wsgi directory, adding myapp to the PYTHONPATH, and this is my /var/www/wsgi/myapp/app.wsgi: activate_this = '/var/www/envs/myapp/bin/activate_this.py' execfile( activate_this, dict(__file__=activate_this) ) from myapp.application import app as application Sorry, I am trying to edit the question to have the rest of my info by it keeps timing out before the edits go through

Read the article
howto only tunnel specific hosts route through openvpn client on tomato

- by kcome

I am relatively newbie in networking world although I did coding and know some sysadmin background for a long time. and here I'm only one step from my destination. The whole picture is : at home I use one LinkSys E3000 as the gateway(don't know yet if this is it's name), wireless AP and no other routing/switching devices. It serves 1 PC and 1 Mac with LAN, 1 Mac Mini + 1 iPad + 2 smartphones with WIFI. My goal is use an openvpn client on the E3000 (with tomato firmware) and make my iPad and smartphone's all WiFi traffic through it, and other devices route remain the same non-openvpn route. So far I'm able to connect openvpn client on E3000 to an openvpn server, tunnel all my devices' all traffic through that openvpn connection. What's left is howto selectively route by source IP (at least in my guessing) to the tunnel while don't bother others. I had learned some 'iptables' and 'route' in past few days however without much luck, so here comes my question. Here are some info which will help you get the structure. ifconfig -a output, some useless lines striped, and in the web interface C0:C1:C0:1A:E0:28 is WAN, C0:C1:C0:1A:E0:27 is LAN, C0:C1:C0:1A:E0:29 is 2.4G wifi AP, C0:C1:C0:1A:E0:2A is 5G wifi AP. root@router:/tmp/home/root# ifconfig -a br0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 eth2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:2A UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host ppp0 Link encap:Point-to-Point Protocol inet addr:172.200.1.43 P-t-P:172.200.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING MULTICAST MTU:1480 Metric:1 vlan1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 vlan2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:28 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 wl0.1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 BROADCAST MULTICAST MTU:1500 Metric:1 brctl show output root@router:/tmp/home/root# brctl show bridge name bridge id STP enabled interfaces br0 8000.c0c1c01ae027 no vlan1 eth1 eth2 before openvpn route-up script root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 openvpn server push PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 8.8.8.8,route 172.20.0.1,topology net30,ping 10,ping-restart 120,ifconfig 172.20.0.6 172.20.0.5' openvpn's stock route-up script Apr 24 14:52:06 router daemon.notice openvpn[1768]: /sbin/ifconfig tun11 172.20.0.6 pointopoint 172.20.0.5 mtu 1500 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 72.14.177.29 netmask 255.255.255.255 gw 172.200.0.1 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 172.20.0.1 netmask 255.255.255.255 gw 172.20.0.5 route after openvpn root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.20.0.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun11 72.14.177.29 172.200.0.1 255.255.255.255 UGH 0 0 0 ppp0 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 172.20.0.1 172.20.0.5 255.255.255.255 UGH 0 0 0 tun11 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 128.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 something I had noticed and tried: * on the web interface of openvpn client there is an option "Create NAT on tunnel", if i check this, there is the following script (probably executed after openvpn connection established) root@router:/tmp/home/root# cat /tmp/etc/openvpn/fw/client1-fw.sh #!/bin/sh iptables -I INPUT -i tun11 -j ACCEPT iptables -I FORWARD -i tun11 -j ACCEPT iptables -t nat -I POSTROUTING -s 192.168.1.0/255.255.255.0 -o tun11 -j MASQUERADE if i uncheck this option, the last line will not appear. Then I guess probably the my issue will be solved by iptables and NAT related commands, I just haven't got enough knowledge to figure them out. I tried run iptables -t nat -I POSTROUTING -s 192.168.1.6 -o tun11 -j MASQUERADE manually after openvpn connected (192.168.1.6 is the ip address of my iPad), then my iPad get internet with openvpn tunnel, however all other devices can't reach internet. in case if needed, here is the iptables about NAT root@router:/tmp/home/root# iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination DROP all -- 0.0.0.0/0 192.168.1.0/24 WANPREROUTING all -- 0.0.0.0/0 172.200.1.43 upnp all -- 0.0.0.0/0 172.200.1.43 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 SNAT all -- 192.168.1.0/24 192.168.1.0/24 to:192.168.1.1 Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain WANPREROUTING (1 references) target prot opt source destination DNAT icmp -- 0.0.0.0/0 0.0.0.0/0 to:192.168.1.1 Chain upnp (1 references) target prot opt source destination DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5353 to:192.168.1.3:5353 Thanks in advance for helping and read this so much, I hope i made every info you need to give a help :)

Read the article
Hard disk problem pop up warning

- by Leonardo

I'm using windows 7 ultimate and it started to give me this hard disk problem warning that i had before in another OS that made me disable smart, it has been over a year since i did and my pc is running ok so my HDD is ok. all i wanna do is disable this warning that popsup while i'm gaming or doing anything else. thanks for your help :) Edit: (adding in info that was added as an answer instead of part of the question) So it's me again and i agree with both answers but i don't have the money right now to buy a new one, and yeah it could die now, i can't say. so i uploaded an image of hd tune pro scan on my HDD thanks again! anymore information would be even better, bye.

Read the article
How safe is it to run CHKDSK on an SSD?

- by Eilon

I recently saw Windows 7 pop up a warning or two that I should run chkdsk on my laptop. My laptop came with an SSD and I'm not sure if there are any negative implications to running chkdsk on such a drive. Are there any potential issues with reporting "bad sectors" on the drive? I would imagine that the physical concept of sectors is completely different between a platter and a microchip. I don't think my SSD supports TRIM. It's about 14 months old and a quick web search seems to hint that it doesn't (though it's nearly impossible to find out this info for sure!). I'm also not sure if TRIM is even relevant here since there shouldn't be much in the way of deletes. So, how safe is it to run chkdsk on my SSD drive? The model of SSD that I have is reported as "Samsung SSD PB22-JS3 2.5".

Read the article
Replication with SQL Server 2005 Express Edition and SQL Compact Edition 3.5

- by Andy Gable

hi all, I need some information on SQL Server 2005 Express edition. What I want to do is have my central database servin local machine databases IE back office Cental database |------------------- Shop floor Terminal 1 |------------------- Shop Floor Terminal 2 |------------------- Shop Floor Terminal 3 |------------------- Shop Floor Terminal 4 |------------------- Shop Floor Terminal 5 |------------------- Shop Floor Terminal 6 I want is so that Shop floor terminals would PULL down ANY changes to the database as and when they happen (selected changes are needed change would be Add new item / Edit Item info that is used by Shop floor terminal (ie price, description, sale group) Is this possible with SQL 2005? I have the ability to make my own Sync Applciation but I would need to know what to look for in the database that trigers a update Many thanks for any advice you can give Andy

Read the article
Restore monitor detection to one only or restore start menu to bottom

- by Mark

I have a co-worker that is no longer able to see his start menu. He used to have it pinned to the left edge of his screen. I tried to troubleshoot it a bit and discovered if we do Windows + R then "cmd" [enter] the command prompt opens (but we don't see the start menu or run box), meaning the start menu is somewhere, just off screen. Restarting doesn't help. Is there some way to force Windows to think it only has a single monitor? It seems to "think" it has two but there's only one and we can get the Start menu back. Or, is there a way to restore the start menu to the bottom? Additional info We are able to right-click the desktop for display settings, etc. We can also get into Windows Explorer (via Ctrl + E) so if we need any of that to restore settings we can do it.

Read the article
Mounting NFS share between OSX and Centos VM

- by Adam

I'm having issues mounting an NFS share I've made on my Mac host (server) from a Centos VM (client). I'm getting a permission denied error. I have this line in /etc/exports on server: /Users/adam/Sites/ 192.168.1.223(rw) and in /etc/fstab on client: 192.168.1.186:/Users/adam/Sites/ /home/adam/Sites/ nfs rw 0 0 I'm sure this is a simple configuration issue, but I've never set up NFS properly before. Extra info: # mount -v 192.168.1.186:/Users/adam/Sites/ /home/adam/Sites/ mount: no type was given - I'll assume nfs because of the colon mount.nfs: timeout set for Mon Nov 26 07:31:40 2012 mount.nfs: trying text-based options 'vers=4,addr=192.168.1.186,clientaddr=192.168.1.223' mount.nfs: mount(2): Protocol not supported mount.nfs: trying text-based options 'addr=192.168.1.186' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: trying 192.168.1.186 prog 100003 vers 3 prot TCP port 2049 mount.nfs: prog 100005, trying vers=3, prot=17 mount.nfs: trying 192.168.1.186 prog 100005 vers 3 prot UDP port 958 mount.nfs: mount(2): Permission denied mount.nfs: access denied by server while mounting 192.168.1.186:/Users/adam/Sites/

Read the article
Gitosis-init returns "Fatal Python error: <stdin> is a directory", why is this?

- by Jasper Kennis

I'm trying to get gitosis installed because I want to use Indefero and I need a deamon for the git:// protocol. However, following the instructions in the Git Pro book (http://progit.org/book/ch4-7.html) I run into trouble pretty soon. This is what happens: [x@x gitosis]# sudo -H -u git gitosis-init < /tmp/id_dsa.pub Fatal Python error: <stdin> is a directory Aborted The error is really vague to me and I didn't find anything helpful around, except that I think stdin is somehow part of C, which confuses me even more since the error is Python. I really don't understand what's going on, or where to look for clues, so I hope someone can tell me where to look next for more info on the problem. Tnx.

Read the article
Restored Domain Controller does not display any information using dcdiag command

- by dasko

I am testing restoring a domain controller from system state backup to different hardware in a non production environment as a sanity check for our restoration procedure. When i run the dcdiag command I get "blank info back" and all that is displayed are two lines as follows: Domain Controller Diagnosis Performing initial setup: and then I am returned to the command prompt. Even when I do dcdiag /v i get the same result. I have double checked the DNS settings and Active Directory works properly. All FSMO roles are being held by this restored Domain Controller. I am able to join test pc's to the domain without issue etc Is this a common issue or is there something that I am missing. Thanks.

Read the article
Resolving System Restore error - Error 0x800423F3 - The writer experienced a transient error

- by Gishu

System restore just stopped working, when I needed it most. (tried diff restore points... same error). Now everytime I run system-restore, it fails with the above error message. I cleared the event logs and retried to isolate the relevant events. I see 5 warnings and 1 info event from VSS and 1 error from System Restore. Here's the first warning from VSS and the error http://dl.dropbox.com/u/11733224/SystemRestore-FirstWarning.txt http://dl.dropbox.com/u/11733224/SystemRestore-FirstError.txt Tried a lot of stuff, but in vain; this error still persists.

Read the article
Video Card needs additional mounting support

- by Sean

We are creating a fairly decent system with crossfire. The issue we are having is apparently the video cards are physically to heavy to be supported purely by the motherboard and case mounts. Whenever we have the case horizontal everything works fine however when we bring the case upright the computer stops working. Relevant Info: Video Cards (2) - Sapphire 5870 (http://www.newegg.com/Product/Product.aspx?Item=N82E16814102856) MotherBoard - Asus M4A79T Deluxe Case - CoolerMaster 922 HAF To me it looks as if an additional support bracket that could hold up the end of the card would be required (included with the viideo cards!!!) Does anyone have any experience with this.

Read the article
OpenWrt logging: how to find out "wifi deauthentication"

- by user62367

If someone starts to use the wifi, i can see that with logread: Jan 23 21:04:47 router daemon.info hostapd: wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: authenticated But how can i see, that he/she's disconnecting? Theres no "bla-bla deauthenticated bla" line in logread, or even a thing that points to that someone get's disconnected.. I tried to google: http://wiki.openwrt.org/doc/uci/system But it doesn't writes about loglevel. Can anyone help me find out, how to find out that someone disconnects it's wifi from the router? The logread doesn't even writes a line when someone disconnects. Please help!! It's important! Thank you!:\

Read the article
Problem with testsaslauthd and kerberos5 ("saslauthd internal error")

- by danorton

The error message “saslauthd internal error” seems like a catch-all for saslauthd, so I’m not sure if it’s a red herring, but here’s the brief description of my problem: This Kerberos command works fine: $ echo getprivs | kadmin -p username -w password Authenticating as principal username with password. kadmin: getprivs current privileges: GET ADD MODIFY DELETE But this SASL test command fails: $ testsaslauthd -u username -p password 0: NO "authentication failed" saslauthd works fine with "-a sasldb", but the above is with "-a kerberos5" This is the most detail I seem to be able to get from saslauthd: saslauthd[]: auth_krb5: krb5_get_init_creds_password: -1765328353 saslauthd[]: do_auth : auth failure: [user=username] [service=imap] [realm=] [mech=kerberos5] [reason=saslauthd internal error] Kerberos seems happy: krb5kdc[](info): AS_REQ (4 etypes {18 17 16 23}) 127.0.0.1: ISSUE: authtime 1298779891, etypes {rep=18 tkt=18 ses=18}, username at REALM for krbtgt/DOMAIN at REALM I’m running Ubuntu 10.04 (lucid) with the latest updates, namely: Kerberos 5 release 1.8.1 saslauthd 2.1.23 Thanks for any clues.

Read the article
"#< #5.1.3 SMTP; 553 sorry, your domain does not exists.> #SMTP#"

- by osgx

Hello I had recieve the error #< #5.1.3 SMTP; 553 sorry, your domain does not exists.> #SMTP# What does this means? It is a message from server with sendmail, send to domain3 (which uses ms exchange). Full error mail from exchange (sorry, not exact message, but translated from ru to en) Diagnostic info for administrators: Forming server: domain1_with_sendmail user@domain3 #< #5.1.3 SMTP; 553 sorry, your domain does not exists.> #SMTP# Does Exchange change text description from remote smtp error? There is "MX" record for domain3 and no "A" records for domain3, only one for "www.domain3" Update" all domains are public and have fully-qualified names, all dns's are accessible." Update2: domain1 has only "A" record, but not the MX one. Can it be a problem?

Read the article
Encode real-time dvb-s stream using mencoder

- by karatchov

My satellite receiver can stream the mpeg-2 video/audio output through lan. Using mencoder, I'm trying to build a script to encode and save the stream in real time with my Core2Duo 1.8 Ghz. Right now, I'm using a single pass, it produces good quality for a video rate of 800Kb/s, but takes more then 95% of CPU power, thus making a lot of frameskips is the computer is used while encoding. mencoder -o -vf lavcdeint -oac mp3lame -lameopts abr:q=2:aq=2 -ovc x264 -ffourcc avc1 -x264encopts crf=25:me=hex:subq=9:frameref=2:nocabac:threads=auto -mc 3 So, I'm considering using a 2-pass encoding to alleviate the processor and record 100% of the stream. But I have no idea how to start. For the info: Standard Stream: mpeg-2 720*576 25fps HD Stream: 1920*1080 50fps (this is not my goal to record it, but it will be super cool if I could)

Read the article
LDAP query on linux against AD returns groups with no members

- by SethG

I am using LDAP+kerberos to authenticate against Active Directory on Windows 2003 R2. My krb5.conf and ldap.conf appear to be correct (according to pretty much every sample I found on the 'net). I can login to the host with both password and ssh keys. When I run getent passwd, all my ldap user accounts are listed with all the important attributes. When I run getent group, all the ldap groups and their gid's are listed, but no group members. If I run ldapsearch and filter on any group, the members are all listed with the "member" attribute. So the data is there for the taking, it's just not being parsed properly. It would appear that I simply am using an incorrect mapping in ldap.conf, but I can't see it. I've tried several variations and all give the same result. Here is my current ldap.conf: host <ad-host1-ip> <ad-host2-ip> base dc=my,dc=full,dc=dn uri ldap://<ad-host1> ldap://<ad-host2> ldap_version 3 binddn <mybinddn> bindpw <mybindpw> scope sub bind_policy hard nss_reconnect_tries 3 nss_reconnect_sleeptime 1 nss_reconnect_maxsleeptime 8 nss_reconnect_maxconntries 3 nss_map_objectclass posixAccount User nss_map_objectclass posixGroup Group nss_map_attribute uid sAMAccountName nss_map_attribute gidNumber msSFU30GidNumber nss_map_attribute uidNumber msSFU30UidNumber nss_map_attribute cn cn nss_map_attribute gecos displayName nss_map_attribute homeDirectory msSFU30HomeDirectory nss_map_attribute loginShell msSFU30LoginShell nss_map_attribute uniqueMember member pam_filter objectcategory=User pam_login_attribute sAMAccountName pam_member_attribute member pam_password ad Here's the kicker: this config works 100% fine on a different linux box with a different distro. It does not work on the distro I am planning on switching to. I have installed from source the versions of pam_ldap and nss_ldap on the new box to match the old box, which fixed another problem I was having with this setup. Other relevant info is the original AD box was Windows 2003. It's mirror died a horrible hardware death so I'm trying to add two more 2003-R2 servers to the mirror tree and ultimately drop the old 2003 box. The new R2 boxes appear to have joined the DC forest properly. What do I need to do to get groups working? I've exhausted all the resources I could find and need a different angle. Any input is appreciated. Status update, 7/31/09 I have managed to tweak my config file to get full info from the AD and performance is nice and snappy. I replaced the back-rev'd copies of pam_ldap and nss_ldap with the current ones for the distro I'm using, so it's back to a standard out-of-the-box install. Here's my current config: host <ad-host1-ip> <ad-host2-ip> base dc=my,dc=full,dc=dn uri ldap://<ad-host1> ldap://<ad-host2> ldap_version 3 binddn <mybinddn> bindpw <mybindpw> scope sub bind_policy soft nss_reconnect_tries 3 nss_reconnect_sleeptime 1 nss_reconnect_maxsleeptime 8 nss_reconnect_maxconntries 3 nss_connect_policy oneshot referrals no nss_map_objectclass posixAccount User nss_map_objectclass posixGroup Group nss_map_attribute uid sAMAccountName nss_map_attribute gidNumber msSFU30GidNumber nss_map_attribute uidNumber msSFU30UidNumber nss_map_attribute cn cn nss_map_attribute gecos displayName nss_map_attribute homeDirectory msSFU30HomeDirectory nss_map_attribute loginShell msSFU30LoginShell nss_map_attribute uniqueMember member pam_filter objectcategory=CN=Person,CN=Schema,CN=Configuration,DC=w2k,DC=cis,DC=ksu,DC=edu pam_login_attribute sAMAccountName pam_member_attribute member pam_password ad ssl off tls_checkpeer no sasl_secprops maxssf=0 The remaining problem now is when you run the groups command, not all subscribed groups are listed. Some are (one or two), but not all. Group memberships are still honored, such as file and printer access. getent group foo still shows that the user is a member of group foo. So it appears to be a presentation bug, and does not interfere with normal operation. It also appears that some (I have not determined exactly how many) group searches do not resolve correctly, even though the group is listed. eg, when you run "getent group bar", nothing is returned, but if you run "getent group|grep bar" or "getent group|grep <bar_gid>" you can see that it indeed listed and your group name and gid are correct. This still seems like an LDAP search or mapping error, but I can't figure out what it is. I'm a heckuva lot closer than earlier in the week, but I'd really like to get this last detail ironed out.

Read the article
uploading a python site to httpdocs?

- by daniel Crabbe

OK - so we've agreed to host a python site, got the files and not sure where to go next. We use a dedicated server and manage it mainly with plesk which has a tick box for a python support but not sure what this does. This is all the info i have from previous hosts; 10,000 ft overview The site is intended to run on a Linux host, specifically Ubuntu Server (tho it should be fine on most distros). The web framework is CherryPy ( http://cherrypy.org/ ), which is a Python based framework. There is no database as such, instead the data is kept in JS files and loaded by the front end. nicholasbarker.com.c6a4facf0192/www/js/video_content_items.js is a prime example of this. The main site templates are in nicholasbarker.com.c6a4facf0192/www/templates/ They are Cheetah templates ( http://www.cheetahtemplate.org/ ) and here's the file structure i've been sent - Could some explain to me how i'd go about uploading and running this site... Any help welcome! Dc

Read the article
DRBD Not syncing between my nodes

- by Mike Curry

Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Read the article
How to open ports on modem for better torrent performance

- by Mehper C. Palavuzlar

I've been using utorrent to download and upload torrents for a long time. Recently someone told me that I need to open port(s) for utorrent from my modem settings for better downloading and uploading performance. Is it true? If yes, how can I do that? My utorrent version: 2.0 and the port used for incoming connections: 61829. My modem: Yaksu S200 ADSL router modem and I can reach its settings via web interface. I looked at the settings but they seem a bit complicated to me. Other info you may need to know: I have dynamic IP. I'm using Win7 x64.

Read the article
Asterisk - Trying to use call files to create a conference call between two dynamic numbers

- by Hank

I'm trying to setup an Asterisk system that will allow me to create a conference call between two dynamic numbers. It seems I can use 'call files' to make Asterisk initiate the call without needing an incoming call - http://www.voip-info.org/tiki-index.php?page=Asterisk+auto-dial+out This example seems to be what I'd need: Channel: SIP/mytrunk/12345678 MaxRetries: 2 RetryTime: 60 WaitTime: 30 Context: callme Extension: 800 Priority: 2 I can generate this file with some scripting language and then place it into the Asterisk Call File folder. The problem I'm having is: How do I call out to two numbers and join them in a conference call? The MeetMe plugin/extension seems to be what I need in terms of conference calling, I'm just unsure as to how I'd use the two together and join them. Also, is it possible to have multiple 2-person conference calls at the same time? Is setting this up as simple as setting aside X amount of 'channels' in the meetme.conf?

Read the article
Long file path returning 404 for "hello.htm"

- by Adam Kane

Hello, I have a long file path that works on my server, but a simliar path returns a 404 error when it is on my clients (IIS6) server (http://ddmat.com/). Here's the functioning file path on my server: http://www.forgefx.com/projects/ddmat/install/Application Files/McCurdys_1_0_0_0/Content/FBX/CCAE1B33/Roof-sectionB-02.fbm/hello.htm My guesses: Maybe the file path is too long? Maybe the ".fbm" in the directory path is invalid? Sorry for the vauge problem description. Please let me know what additional info I can provide that'd be helpful. Update: The problem happens even in short paths, with no spaces: http://www.myserver/test.folder/hell.htm Thanks, Adam

Read the article
Firefox extension to dinamically change superbar icon, similar to windows live messenger.

- by D Connors

With seven's new superbar, windows live messenger is now able to display your status on the bar's icon (and not on the system tray). So that got me thinking, maybe a firefox extension could do something similar. Therefore, here's my question to those who understand the workings and spinning wheels behind firefox extensions: could a firefox extension change the superbar icon to display some useful info? Does the current functionality support it? EDIT: I think my question is not really clear. I just want to know if it's theoritically possible for a firefox addon to change the superbar icon dinamically. For instance, windows live messenger changes the icon acording to your status, and gmail notifier plus changes the icon according to your unread messages count. I'm just wondering if firefox as it is right now supports an extension with that functionality. I know that no current extensions do it, and I'm not looking for a gmail notifier (that was just an example). thanks

Read the article
Puppet - how can i copy a file to several user folders?

- by Eliot Rocha

Well i was using the info on this: Puppet - Any way to copy predefined custom configuration files for software on clients from the puppet master (host)? But i need some more elaborated, because i have several Desktops and are in use by 2 or 3 users each one, so i want to make a class for copy a shortcut in his desktops. The computers are joined to a domain, so any user can log in any desktop, and his profile is created in every desktop. I've tryed with this: class applink { file { "/home/installer/Escritorio/Workdesktop.desktop": owner => installer, group => root, mode => 770, source => "puppet://$server/files/Workdesktop.desktop" } This is only for one user called "installer", how can do this for several users? Can i use $USER for do this? Any Thoughts? Thank You!

Read the article
Linux - Only first virtual interface can ping external gateway

- by husvar

I created 3 virtual interfaces with different mac addresses all linked to the same physical interface. I see that they successfully arp for the gw and they can ping (the request is coming in the packet capture in wireshark). However the ping utility does not count the responses. Does anyone knows the issue? I am running Ubuntu 14.04 in a VmWare. root@ubuntu:~# ip link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:febc:fc8b/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip route sh root@ubuntu:~# ip link add link eth0 eth0.1 addr 00:00:00:00:00:11 type macvlan root@ubuntu:~# ip link add link eth0 eth0.2 addr 00:00:00:00:00:22 type macvlan root@ubuntu:~# ip link add link eth0 eth0.3 addr 00:00:00:00:00:33 type macvlan root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh root@ubuntu:~# dhclient -v eth0.1 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.1/00:00:00:00:00:11 Sending on LPF/eth0.1/00:00:00:00:00:11 Sending on Socket/fallback DHCPDISCOVER on eth0.1 to 255.255.255.255 port 67 interval 3 (xid=0x568eac05) DHCPREQUEST of 192.168.1.145 on eth0.1 to 255.255.255.255 port 67 (xid=0x568eac05) DHCPOFFER of 192.168.1.145 from 192.168.1.254 DHCPACK of 192.168.1.145 from 192.168.1.254 bound to 192.168.1.145 -- renewal in 1473 seconds. root@ubuntu:~# dhclient -v eth0.2 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.2/00:00:00:00:00:22 Sending on LPF/eth0.2/00:00:00:00:00:22 Sending on Socket/fallback DHCPDISCOVER on eth0.2 to 255.255.255.255 port 67 interval 3 (xid=0x21e3114e) DHCPREQUEST of 192.168.1.146 on eth0.2 to 255.255.255.255 port 67 (xid=0x21e3114e) DHCPOFFER of 192.168.1.146 from 192.168.1.254 DHCPACK of 192.168.1.146 from 192.168.1.254 bound to 192.168.1.146 -- renewal in 1366 seconds. root@ubuntu:~# dhclient -v eth0.3 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.3/00:00:00:00:00:33 Sending on LPF/eth0.3/00:00:00:00:00:33 Sending on Socket/fallback DHCPDISCOVER on eth0.3 to 255.255.255.255 port 67 interval 3 (xid=0x11dc5f03) DHCPREQUEST of 192.168.1.147 on eth0.3 to 255.255.255.255 port 67 (xid=0x11dc5f03) DHCPOFFER of 192.168.1.147 from 192.168.1.254 DHCPACK of 192.168.1.147 from 192.168.1.254 bound to 192.168.1.147 -- renewal in 1657 seconds. root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.145/24 brd 192.168.1.255 scope global eth0.1 valid_lft forever preferred_lft forever 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.146/24 brd 192.168.1.255 scope global eth0.2 valid_lft forever preferred_lft forever 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.147/24 brd 192.168.1.255 scope global eth0.3 valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh default via 192.168.1.254 dev eth0.1 192.168.1.0/24 dev eth0.1 proto kernel scope link src 192.168.1.145 192.168.1.0/24 dev eth0.2 proto kernel scope link src 192.168.1.146 192.168.1.0/24 dev eth0.3 proto kernel scope link src 192.168.1.147 root@ubuntu:~# arping -c 5 -I eth0.1 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.145 eth0.1 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 6.936ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.986ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 0.654ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.137ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.426ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.2 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.146 eth0.2 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.665ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.753ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 16.500ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.287ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 32.438ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.3 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.147 eth0.3 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 4.422ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.429ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.321ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 40.423ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.268ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# tcpdump -n -i eth0.1 -v & [1] 5317 root@ubuntu:~# ping -c5 -q -I eth0.1 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.145 eth0.1: 56(84) bytes of data. tcpdump: listening on eth0.1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:37.612558 IP (tos 0x0, ttl 64, id 2595, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 2, length 64 13:18:37.618864 IP (tos 0x68, ttl 64, id 14493, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 2, length 64 13:18:37.743650 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:38.134997 IP (tos 0x0, ttl 128, id 23547, offset 0, flags [none], proto UDP (17), length 229) 192.168.1.86.138 > 192.168.1.255.138: NBT UDP PACKET(138) 13:18:38.614580 IP (tos 0x0, ttl 64, id 2596, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 3, length 64 13:18:38.793479 IP (tos 0x68, ttl 64, id 14495, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 3, length 64 13:18:39.151282 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:39.615612 IP (tos 0x0, ttl 64, id 2597, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 4, length 64 13:18:39.746981 IP (tos 0x68, ttl 64, id 14496, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 4, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4008ms rtt min/avg/max/mdev = 2.793/67.810/178.934/73.108 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 12 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.1 -v root@ubuntu:~# tcpdump -n -i eth0.2 -v & [1] 5320 root@ubuntu:~# ping -c5 -q -I eth0.2 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.146 eth0.2: 56(84) bytes of data. tcpdump: listening on eth0.2, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:41.536874 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.254 is-at 58:98:35:57:a0:70, length 46 13:18:41.536933 IP (tos 0x0, ttl 64, id 2599, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 1, length 64 13:18:41.539255 IP (tos 0x68, ttl 64, id 14507, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 1, length 64 13:18:42.127715 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:42.511725 IP (tos 0x0, ttl 64, id 2600, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 2, length 64 13:18:42.514385 IP (tos 0x68, ttl 64, id 14527, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 2, length 64 13:18:42.743856 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:43.511727 IP (tos 0x0, ttl 64, id 2601, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 3, length 64 13:18:43.513768 IP (tos 0x68, ttl 64, id 14528, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 3, length 64 13:18:43.637598 IP (tos 0x0, ttl 128, id 23551, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.641185 IP (tos 0x0, ttl 128, id 23552, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 192.168.1.255.17500: UDP, length 197 13:18:43.641201 IP (tos 0x0, ttl 128, id 23553, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.743890 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:44.510758 IP (tos 0x0, ttl 64, id 2602, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 4, length 64 13:18:44.512892 IP (tos 0x68, ttl 64, id 14538, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 4, length 64 13:18:45.510794 IP (tos 0x0, ttl 64, id 2603, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 5, length 64 13:18:45.519701 IP (tos 0x68, ttl 64, id 14539, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 5, length 64 13:18:49.287554 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:50.013463 IP (tos 0x0, ttl 255, id 50737, offset 0, flags [DF], proto UDP (17), length 73) 192.168.1.146.5353 > 224.0.0.251.5353: 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:50.218874 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:51.129961 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:52.197074 IP6 (hlim 255, next-header UDP (17) payload length: 53) 2001:818:d812:da00:200:ff:fe00:22.5353 > ff02::fb.5353: [udp sum ok] 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:54.128240 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 13:18:54.657731 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:54.743174 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 25 packets captured 26 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.2 -v root@ubuntu:~# tcpdump -n -i eth0.3 icmp & [1] 5324 root@ubuntu:~# ping -c5 -q -I eth0.3 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.147 eth0.3: 56(84) bytes of data. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0.3, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:56.373434 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 1, length 64 13:18:57.372116 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 2, length 64 13:18:57.381263 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 2, length 64 13:18:58.371141 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 3, length 64 13:18:58.373275 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 3, length 64 13:18:59.371165 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 4, length 64 13:18:59.373259 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 4, length 64 13:19:00.371211 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 5, length 64 13:19:00.373278 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 5, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 1 received, 80% packet loss, time 4001ms rtt min/avg/max/mdev = 13.666/13.666/13.666/0.000 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 10 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.3 icmp root@ubuntu:~# arp -n Address HWtype HWaddress Flags Mask Iface 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.1 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.2 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.3

Read the article
Virtualbox two networks slow

- by Petr Marek

I am running an Ubuntu server guest on Win 7 guest, and am running a webrick server (RoR dev). If I have just a host-only network, everything works fine and the browser response is instant. However, if I add a second network (NAT), so that the server can connect to the internet (for various updates etc.), the host-to-guest access gets really slow. I can't use the bridge connection. I am using the port 3000 (RoR Webrick server) and connecting to the guest via internet browser on this port (eg http://192.168.56.102:3000). Any idea, what could be causing this? If I ping the IP from host console, I get < 0ms. Here are the settings (relevant info is in english; Povoleno vše is Everything is allowed):

Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300 | Next Page >