Search Results

Search found 8268 results on 331 pages for 'difference'.

Page 294/331 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

• Weird SSIS Configuration Error

  - by Christopher House

  I ran into an interesting SSIS issue that I thought I'd share in hopes that it may save someone from bruising their head after repeatedly banging it on the desk like I did.  I was trying to setup what I believe is referred to as "indirect configuration" in SSIS.  This is where you store your configuration in some repository like a database or a file, then store the location of that repository in an environment variable and use that to configure the connection to your configuration repository.  In my specific situation, I was using a SQL database.  I had this all working, but for reasons I'll not bore you with, I had to move my SSIS development to a new VM last week.  When I got my new VM, I set about creating a new package.  I finished up development on the package and started setting up configuration.  I created an OLE DB connection that pointed to my configuration table then went through the configuration wizard to have the connection string for this connection set through my environment variable.  I then went through the wizard to set another property through a value stored in the configuration table.  When I got to the point where you select the connection, my connection wasn't in the list: As you can see in the screen capture above, the ConfigurationDb connection isn't in the list of available SQL connections in the configuration wizard.  Strange.  I canceled out of the wizard, went to the properties for ConfigurationDb, tested the connection and it was successful.  I went back to the wizard again and this time ConfigurationDb was there.  I completed the wizard then went to test my package.  Unfortunately the package wouldn't run, I got the following error: Unfortunately, googling for this error code didn't help much as none of the results appears related to package configuration.  I did notice that when I went back through the package configuration and tried to edit a previously saved config entry,  I was getting the following error: I checked the connection string I had stored in my environment variable and noticed that indeed, it did not have a provider name.  I didn't recall having included one on my previous VM, but I figured I'd include it just to see what happened.  That made no difference at all.  After a day and a half of trying to figure out what the problem was, I'm pleased to report that through extensive trial and error, I have resolved the error. As it turns out, the person who setup this new VM for me named the server SQLSERVER2008.  This meant my configuration connection string was: Initial Catalog=SSISConfigDb;Data Source=SQLSERVER2008;Integrated Security=SSPI; Just for the heck of it, I tried changing it to: Initial Catalog=SSISConfigDb;Data Source=(local);Integrated Security=SSPI; That did the trick!  As soon as I restarted BIDS, I was able to run the package with no errors at all.  Crazy.  So, the moral of the story is, don't name your server SQLSERVER2008 if you want SSIS configuration to work when using SQL as your config store.

  Read the article

• My search what the Cloud will mean for my Work, part 2

  - by Kay Sellenrode

  My experience with the cloud and why work will change and not disappear. Until now I have multiple experiences with the cloud, for the most good. i have worked on multiple cloud solutions in the past but let me describe them as 0.x versions. For me the 1st real serious cloud experience was a bit more than 1 year ago, when our company switched from an in house server to Microsoft BPOS as a complete replacement. Since we are a small consultancy firm and don’t have that much else to do than consulting, our IT requirements are quite simple. We need Mail and Storage space for our documents. With the in house server we had multiple outages during a year, mostly by lack of administering. Being consultants in the field and hardly having time to maintain a server, BPOS was and still is for us the right solution. Since the migration we have less outages and a much more robust solution. Have we run into issues with BPOS for our own environment? No not that I’m aware of. Based on this experience I made a stance about deploy ability of BPOS and cloud solutions, they are suitable for MKB (Dutch for Medium and Small Businesses). Most Small businesses don’t have the amount of work to hire a full time it admin. Hiring a service provider to maintain their own server might be even more costly than hiring an admin. So seeing the capabilities of BPOS and the needs of most businesses I see it as a great solution that gives the business a complete Server replacement solution for a fixed price per user. resulting in a clear budget for IT spending, something most small businesses were looking for, for a long time. So right now I’m deploying BPOS with a customer, and I run into some of the Cloud 1.0 issues. In my opinion BPOS is a good working Cloud version 1.0 solution. What do I mean with 1.0? Well 1.0 is mostly a tested solution (unlike 0.x versions) but still have quite some limitations caused by too few market experience. in my opnion this is also the reason why we don’t see that much BPOS customers yet and why I think Office 365 will make a huge difference. What I have seen of 365 shows me it is a Cloud 2.0 version, meaning it has all needed features and is much more flexible to the customer. This is also why I see changes happen in my work field, changes and not unemployment due to Cloud solutions. Cloud 1.0 solutions gave me the idea that if every customer would adopt them I would be out of work. But in reality Cloud 1.0 solutions are here just to set the market needs. The Cloud 2.0 and higher versions will give the customer much more flexibility, but also require the need for a consultant. Where the 1.0 versions are simple to setup and maintain, the 2.0 solution needs more thought upfront and afterwards. ie. BPOS in its 1.0 version brings you a very simplified Exchange 2007 solution, Suitable for some customers. Looking at Office 365 you receive almost a full blown Exchange 2010 solution. I expect this to be even more customizable in the next version. In my search for the changes to my work I try to regulary write a post with my thought around the Cloud and the impact on my work as a consultant. I'm also planning to present around this topic, so if anyone is interested to see me present around this topic, you're more than welcome to contact me.

  Read the article

• Default Parameters vs Method Overloading

  - by João Angelo

  With default parameters introduced in C# 4.0 one might be tempted to abandon the old approach of providing method overloads to simulate default parameters. However, you must take in consideration that both techniques are not interchangeable since they show different behaviors in certain scenarios. For me the most relevant difference is that default parameters are a compile time feature while method overloading is a runtime feature. To illustrate these concepts let’s take a look at a complete, although a bit long, example. What you need to retain from the example is that static method Foo uses method overloading while static method Bar uses C# 4.0 default parameters. static void CreateCallerAssembly(string name) { // Caller class - Invokes Example.Foo() and Example.Bar() string callerCode = String.Concat( "using System;", "public class Caller", "{", " public void Print()", " {", " Console.WriteLine(Example.Foo());", " Console.WriteLine(Example.Bar());", " }", "}"); var parameters = new CompilerParameters(new[] { "system.dll", "Common.dll" }, name); new CSharpCodeProvider().CompileAssemblyFromSource(parameters, callerCode); } static void Main() { // Example class - Foo uses overloading while Bar uses C# 4.0 default parameters string exampleCode = String.Concat( "using System;", "public class Example", "{{", " public static string Foo() {{ return Foo(\"{0}\"); }}", " public static string Foo(string key) {{ return \"FOO-\" + key; }}", " public static string Bar(string key = \"{0}\") {{ return \"BAR-\" + key; }}", "}}"); var compiler = new CSharpCodeProvider(); var parameters = new CompilerParameters(new[] { "system.dll" }, "Common.dll"); // Build Common.dll with default value of "V1" compiler.CompileAssemblyFromSource(parameters, String.Format(exampleCode, "V1")); // Caller1 built against Common.dll that uses a default of "V1" CreateCallerAssembly("Caller1.dll"); // Rebuild Common.dll with default value of "V2" compiler.CompileAssemblyFromSource(parameters, String.Format(exampleCode, "V2")); // Caller2 built against Common.dll that uses a default of "V2" CreateCallerAssembly("Caller2.dll"); dynamic caller1 = Assembly.LoadFrom("Caller1.dll").CreateInstance("Caller"); dynamic caller2 = Assembly.LoadFrom("Caller2.dll").CreateInstance("Caller"); Console.WriteLine("Caller1.dll:"); caller1.Print(); Console.WriteLine("Caller2.dll:"); caller2.Print(); } And if you run this code you will get the following output: // Caller1.dll: // FOO-V2 // BAR-V1 // Caller2.dll: // FOO-V2 // BAR-V2 You see that even though Caller1.dll runs against the current Common.dll assembly where method Bar defines a default value of “V2″ the output show us the default value defined at the time Caller1.dll compiled against the first version of Common.dll. This happens because the compiler will copy the current default value to each method call, much in the same way a constant value (const keyword) is copied to a calling assembly and changes to it’s value will only be reflected if you rebuild the calling assembly again. The use of default parameters is also discouraged by Microsoft in public API’s as stated in (CA1026: Default parameters should not be used) code analysis rule.

  Read the article

• Stir Trek 2: Iron Man Edition

  Next month (7 May 2010) Ill be presenting at the second annual Stir Trek event in Columbus, Ohio. Stir Trek (so named because last year its themes mixed MIX and the opening of the Star Trek movie) is a very cool local event.  Its a lot of fun to present at and to attend, because of its unique venue: a movie theater.  And whats more, the cost of admission includes a private showing of a new movie (this year: Iron Man 2).  The sessions cover a variety of topics (not just Microsoft), similar to CodeMash.  The event recently sold out, so Im not telling you all of this so that you can go and sign up (though I believe you can get on the waitlist still).  Rather, this is pretty much just an excuse for me to talk about my session as a way to organize my thoughts. Im actually speaking on the same topic as I did last year, but the key difference is that last year the subject of my session was nowhere close to being released, and this year, its RTM (as of last week).  Thats right, the topic is Whats New in ASP.NET 4 how did you guess? Whats New in ASP.NET 4 So, just what *is* new in ASP.NET 4?  Hasnt Microsoft been spending all of their time on Silverlight and MVC the last few years?  Well, actually, no.  There are some pretty cool things that are now available out of the box in ASP.NET 4.  Theres a nice summary of the new features on MSDN.  Here is my super-brief summary: Extensible Output Caching use providers like distributed cache or file system cache Preload Web Applications IIS 7.5 only; avoid the startup tax for your site by preloading it. Permanent (301) Redirects are finally supported by the framework in one line of code, not two. Session State Compression Can speed up session access in a web farm environment.  Test it to see. Web Forms Features several of which mirror ASP.NET MVC advantages (viewstate, control ids) Set Meta Keywords and Description easily Granular and inheritable control over ViewState Support for more recent browsers and devices Routing (introduced in 3.5 SP1) some new features and zero web.config changes required Client ID control makes client manipulation of DOM elements much simpler. Row Selection in Data Controls fixed (id based, not row index based) FormView and ListView enhancements (less markup, more CSS compliant) New QueryExtender control makes filtering data from other Data Source Controls easy More CSS and Accessibility support Reduction of Tables and more control over output for other template controls Dynamic Data enhancements More control templates Support for inheritance in the Data Model New Attributes ASP.NET Chart Control (learn more) Lots of IDE enhancements Web Deploy tool My session will cover many but not all of these features.  Theres only an hour (3pm-4pm), and its right before the prize giveaway and movie showing, so Ill be moving quickly and most likely answering questions off-line via email after the talk. Hope to see you there! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• HOWTO Turn off SPARC T4 or Intel AES-NI crypto acceleration.

  - by darrenm

  Since we released hardware crypto acceleration for SPARC T4 and Intel AES-NI support we have had a common question come up: 'How do I test without the hardware crypto acceleration?'. Initially this came up just for development use so developers can do unit testing on a machine that has hardware offload but still cover the code paths for a machine that doesn't (our integration and release testing would run on all supported types of hardware anyway).  I've also seen it asked in a customer context too so that we can show that there is a performance gain from the hardware crypto acceleration, (not just the fact that SPARC T4 much faster performing processor than T3) and measure what it is for their application. With SPARC T2/T3 we could easily disable the hardware crypto offload by running 'cryptoadm disable provider=n2cp/0'.  We can't do that with SPARC T4 or with Intel AES-NI because in both of those classes of processor the encryption doesn't require a device driver instead it is unprivileged user land callable instructions. Turns out there is away to do this by using features of the Solaris runtime loader (ld.so.1). First I need to expose a little bit of implementation detail about how the Solaris Cryptographic Framework is implemented in Solaris 11.  One of the new Solaris 11 features of the linker/loader is the ability to have a single ELF object that has multiple different implementations of the same functions that are selected at runtime based on the capabilities of the machine.  The alternate to this is having the application coded to call getisax() and make the choice itself.  We use this functionality of the linker/loader when we build the userland libraries for the Solaris Cryptographic Framework (specifically libmd.so, and the unfortunately misnamed due to historical reasons libsoftcrypto.so) The Solaris linker/loader allows control of a lot of its functionality via environment variables, we can use that to control the version of the cryptographic functions we run.  To do this we simply export the LD_HWCAP environment variable with values that tell ld.so.1 to not select the HWCAP section matching certain features even if isainfo says they are present.  For SPARC T4 that would be: export LD_HWCAP="-aes -des -md5 -sha256 -sha512 -mont -mpul" and for Intel systems with AES-NI support: export LD_HWCAP="-aes" This will work for consumers of the Solaris Cryptographic Framework that use the Solaris PKCS#11 libraries or use libmd.so interfaces directly.  It also works for the Oracle DB and Java JCE.  However does not work for the default enabled OpenSSL "t4" or "aes-ni" engines (unfortunately) because they do explicit calls to getisax() themselves rather than using multiple ELF cap sections. However we can still use OpenSSL to demonstrate this by explicitly selecting "pkcs11" engine  using only a single process and thread.  $ openssl speed -engine pkcs11 -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 54170.81k 187416.00k 489725.70k 805445.63k 1018880.00k $ LD_HWCAP="-aes" openssl speed -engine pkcs11 -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 29376.37k 58328.13k 79031.55k 86738.26k 89191.77k We can clearly see the difference this makes in the case where AES offload to the SPARC T4 was disabled. The "t4" engine is faster than the pkcs11 one because there is less overhead (again on a SPARC T4-1 using only a single process/thread - using -multi you will get even bigger numbers). $ openssl speed -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 85526.61k 89298.84k 91970.30k 92662.78k 92842.67k Yet another cool feature of the Solaris linker/loader, thanks Rod and Ali. Note these above openssl speed output is not intended to show the actual performance of any particular benchmark just that there is a significant improvement from using hardware acceleration on SPARC T4. For cryptographic performance benchmarks see the http://blogs.oracle.com/BestPerf/ postings.

  Read the article

• Shadows shimmer when camera moves

  - by Chad Layton

  I've implemented shadow maps in my simple block engine as an exercise. I'm using one directional light and using the view volume to create the shadow matrices. I'm experiencing some problems with the shadows shimmering when the camera moves and I'd like to know if it's an issue with my implementation or just an issue with basic/naive shadow mapping itself. Here's a video: http://www.youtube.com/watch?v=vyprATt5BBg&feature=youtu.be Here's the code I use to create the shadow matrices. The commented out code is my original attempt to perfectly fit the view frustum. You can also see my attempt to try clamping movement to texels in the shadow map which didn't seem to make any difference. Then I tried using a bounding sphere instead, also to no apparent effect. public void CreateViewProjectionTransformsToFit(Camera camera, out Matrix viewTransform, out Matrix projectionTransform, out Vector3 position) { BoundingSphere cameraViewFrustumBoundingSphere = BoundingSphere.CreateFromFrustum(camera.ViewFrustum); float lightNearPlaneDistance = 1.0f; Vector3 lookAt = cameraViewFrustumBoundingSphere.Center; float distanceFromLookAt = cameraViewFrustumBoundingSphere.Radius + lightNearPlaneDistance; Vector3 directionFromLookAt = -Direction * distanceFromLookAt; position = lookAt + directionFromLookAt; viewTransform = Matrix.CreateLookAt(position, lookAt, Vector3.Up); float lightFarPlaneDistance = distanceFromLookAt + cameraViewFrustumBoundingSphere.Radius; float diameter = cameraViewFrustumBoundingSphere.Radius * 2.0f; Matrix.CreateOrthographic(diameter, diameter, lightNearPlaneDistance, lightFarPlaneDistance, out projectionTransform); //Vector3 cameraViewFrustumCentroid = camera.ViewFrustum.GetCentroid(); //position = cameraViewFrustumCentroid - (Direction * (camera.FarPlaneDistance - camera.NearPlaneDistance)); //viewTransform = Matrix.CreateLookAt(position, cameraViewFrustumCentroid, Up); //Vector3[] cameraViewFrustumCornersWS = camera.ViewFrustum.GetCorners(); //Vector3[] cameraViewFrustumCornersLS = new Vector3[8]; //Vector3.Transform(cameraViewFrustumCornersWS, ref viewTransform, cameraViewFrustumCornersLS); //Vector3 min = cameraViewFrustumCornersLS[0]; //Vector3 max = cameraViewFrustumCornersLS[0]; //for (int i = 1; i < 8; i++) //{ // min = Vector3.Min(min, cameraViewFrustumCornersLS[i]); // max = Vector3.Max(max, cameraViewFrustumCornersLS[i]); //} //// Clamp to nearest texel //float texelSize = 1.0f / Renderer.ShadowMapSize; //min.X -= min.X % texelSize; //min.Y -= min.Y % texelSize; //min.Z -= min.Z % texelSize; //max.X -= max.X % texelSize; //max.Y -= max.Y % texelSize; //max.Z -= max.Z % texelSize; //// We just use an orthographic projection matrix. The sun is so far away that it's rays are essentially parallel. //Matrix.CreateOrthographicOffCenter(min.X, max.X, min.Y, max.Y, -max.Z, -min.Z, out projectionTransform); } And here's the relevant part of the shader: if (CastShadows) { float4 positionLightCS = mul(float4(position, 1.0f), LightViewProj); float2 texCoord = clipSpaceToScreen(positionLightCS) + 0.5f / ShadowMapSize; float shadowMapDepth = tex2D(ShadowMapSampler, texCoord).r; float distanceToLight = length(LightPosition - position); float bias = 0.2f; if (shadowMapDepth < (distanceToLight - bias)) { return float4(0.0f, 0.0f, 0.0f, 0.0f); } } The shimmer is slightly better if I drastically reduce the view volume but I think that's mostly just because the texels become smaller and it's harder to notice them flickering back and forth. I'd appreciate any insight, I'd very much like to understand what's going on before I try other techniques.

  Read the article

• Best depth sorting method for a Top Down 2D game using a 3D physics engine

  - by Alic44

  I've spent many days googling this and still have issues with my game engine I'd like to ask about, which I haven't seen addressed before. I think the problem is that my game is an unusual combination of a completely 2D graphical approach using XNA's SpriteBatch, and a completely 3D engine (the amazing BEPU physics engine) with rotation mostly disabled. In essence, my question is similar to this one (the part about "faux 3D"), but the difference is that in my game, the player as well as every other creature is represented by 3D objects, and they can all jump, pick up other objects, and throw them around. What this means is that sorting by one value, such as a Z position (how far north/south a character is on the screen) won't work, because as soon as a smaller creature jumps on top of a larger creature, or a box, and walks backwards, the moment its z value is less than that other creature, it will appear to be behind the object it is actually standing on. I actually originally solved this problem by splitting every object in the game into physics boxes which MUST have a Y height equal to their Z depth. I then based the depth sorting value on the object's y position (how high it is off the ground) PLUS its z position (how far north or south it is on the screen). The problem with this approach is that it requires all moving objects in the game to be split graphically into chunks which match up with a physical box which has its y dimension equal to its z dimension. Which is stupid. So, I got inspired last night to rewrite with a fresh approach. My new method is a little more complex, but I think a little more sane: every object which needs to be sorted by depth in the game exposes the interface IDepthDrawable and is added to a list owned by the DepthDrawer object. IDepthDrawable contains: public interface IDepthDrawable { Rectangle Bounds { get; } //possibly change this to a class if struct copying of the xna Rectangle type becomes an issue DepthDrawShape DepthShape { get; } void Draw(SpriteBatch spriteBatch); } The Bounds Rectangle of each IDepthDrawable object represents the 2D Axis-Aligned Bounding Box it will take up when drawn to the screen. Anything that doesn't intersect the screen will be culled at this stage and the remaining on-screen IDepthDrawables will be Bounds tested for intersections with each other. This is where I get a little less sure of what I'm doing. Each group of collisions will be added to a list or other collection, and each list will sort itself based on its DepthShape property, which will have access to the object-to-be-drawn's physics information. For starting out, lets assume everything in the game is an axis aligned 3D Box shape. Boxes are pretty easy to sort. Something like: if (depthShape1.Back > depthShape2.Front) //if depthShape1 is in front of depthShape2. //depthShape1 goes on top. else if (depthShape1.Bottom > depthShape2.Top) //if depthShape1 is above depthShape2. //depthShape1 goes on top. //if neither of these are true, depthShape2 must be in front or above. So, by sorting draw order by several different factors from the physics engine, I believe I can get a really correct draw order. My question is, is this a good way of going about this, or is there some tried and true, tested way which is completely different and has somehow completely eluded me on the internets? And, if this does seem like a good way to remake my draw order sorting, what's the right sorting algorithm for reordering the Bounds Rectangle collision lists, and how do you deal with a Bounds Rectangle colliding with two different object which don't collide with eachother. I know these are solved problems, but I've only been programming for a year so any specific input here will be greatly appreciated. Thanks for reading this far, ye who made it -- sorry it was so long!

  Read the article

• CacheAdapter 2.4 – Bug fixes and minor functional update

  - by Glav

  Note: If you are unfamiliar with the CacheAdapter library and what it does, you can read all about its awesome ability to utilise memory, Asp.Net Web, Windows Azure AppFabric and memcached caching implementations via a single unified, simple to use API from here and here.. The CacheAdapter library is receiving an update to version 2.4 and is currently available on Nuget here. Update: The CacheAdapter has actualy just had a minor revision to 2.4.1. This significantly increases the performance and reliability in memcached scenario under more extreme loads. General to moderate usage wont see any noticeable difference though. Bugs This latest version fixes a big that is only present in the memcached implementation and is only seen in rare, intermittent times (making i particularly hard to find). The bug is where a cache node would be removed from the farm when errors in deserialization of cached objects would occur due to serialised data not being read from the stream in entirety. The code also contains enhancements to better surface serialization exceptions to aid in the debugging process. This is also specifically targeted at the memcached implementation. This is important when moving from something like memory or Asp.Web caching mechanisms to memcached where the serialization rules are not as lenient. There are a few other minor bug fixes, code cleanup and a little refactoring. Minor feature addition In addition to this bug fix, many people have asked for a single setting to either enable or disable the cache.In this version, you can disable the cache by setting the IsCacheEnabled flag to false in the application configuration file. Something like the example below: <Glav.CacheAdapter.MainConfig> <setting name="CacheToUse" serializeAs="String"> <value>memcached</value> </setting> <setting name="DistributedCacheServers" serializeAs="String"> <value>localhost:11211</value> </setting> <setting name="IsCacheEnabled" serializeAs="String"> <value>False</value> </setting> </Glav.CacheAdapter.MainConfig> Your reasons to use this feature may vary (perhaps some performance testing or problem diagnosis). At any rate, disabling the cache will cause every attempt to retrieve data from the cache, resulting in a cache miss and returning null. If you are using the ICacheProvider with the delegate/Func<T> syntax to populate the cache, this delegate method will get executed every single time. For example, when the cache is disabled, the following delegate/Func<T> code will be executed every time: var data1 = cacheProvider.Get<SomeData>("cache-key", DateTime.Now.AddHours(1), () => { // With the cache disabled, this data access code is executed every attempt to // get this data via the CacheProvider. var someData = new SomeData() { SomeText = "cache example1", SomeNumber = 1 }; return someData; }); One final note: If you access the cache directly via the ICache instance, instead of the higher level ICacheProvider API, you bypass this setting and still access the underlying cache implementation. Only the ICacheProvider instance observes the IsCacheEnabled setting. Thanks to those individuals who have used this library and provided feedback. Ifyou have any suggestions or ideas, please submit them to the issue register on bitbucket (which is where you can grab all the source code from too)

  Read the article

• Microsoft Build 2012 Day 1 Keynote Summary

  - by Tim Murphy

  So I have finally dried the tears after watching the Keynote for Build 2012.  This wasn’t because it was an emotional presentation, but because for the second year I missed the goodies.  Each on site attendee got a Surface RT, a Lumia 920 and a voucher for 100GB of SkyDrive storage. The event was opened with the announcement that in the three days since the launch of Windows 8 over 4 million upgrades have been sold.  I don’t care who you are that is an impressive stat.  Ballmer then spent a fair amount of time remaking the case for the Windows and Windows Phone platforms similar to what we have heard over the last to launch events. There were some cool, but non-essential demos.  The one that was the most fun was the Perceptive Pixel 82” slate device.  At first glance I wondered why I would ever want such a device, but then Ballmer explained it’s possible use for schools and boardrooms.  The actually made sense. Then things got strange.  Steve started explaining features that developers could leverage.  Usually this type of information is left to the product leads.  He focused on the integration with the Charms features such as Search and Share. Steve “Guggs” Guggenheim showed off an app that would appeal to my kids from Disney called “Agent P” which is base on Phineas and Ferb.  Then he got to the meat of the presentation.  We found out that you could add a tile that can be used to sell ad space.  In the same vein we also found out that you could use Microsoft’s, Paypal’s or any commerce engine of your own creation or choosing. For those who are interested in sports and especially developing sports apps you would have found the small presentation from Michael Bayle of ESPN.  He introduced the ESPN app which has tons of features.  For the developers in the crowd he also mentioned that ESPN has an API available at developer.espn.com. During the launch events we were told apps were coming.  In this presentation we were actually shown a scrolling list of logos and told about a couple of them.  Ballmer mentioned specifically Twitter, SAP and DropBox.  These are impressive names that were just a couple of the list impressive names. Steve Ballmer addressed the question of why you should develop for the Windows 8 platform.  He feels that Microsoft has the best commercial terms for developers, a better way to build apps than other platforms and a variety of form factors.  His key point though was the available volume of customers given the current Windows install base and assuming even a flat growth of the platform.  This he backed with a promise that Microsoft is going to do better at marketing and you won’t be able to avoid the ads that they are bringing out. The last section of the key note was present by Kevin Gallo from the Windows Phone team.  This was the real reason I tuned into the webcast.  He impressed upon those watching that the strength of developing for the Microsoft platform is the common programming model that now exist.  While there are difference between form factor implementations you can leverage code across them. He claimed that 90% of developer requests for Windows Phone 8 had been implemented.  These include: More controls with better performance Better live tiles including lock screen integration Speech support in custom apps Easier submission to the market place App camera integration VOIP and chat support Bluetooth and NFC support Native C++ development Direct 3D development   The quote from Kevin that stood out for me was that “Take your Dramamine and buckle your seatbelt type of games are coming to Windows Phone 8”.  He back this up by displaying a list of game development frameworks and then having Unity come out and do a demo. Ok, almost done … The last two things of note for me were the announcement that the SDK is immediately available at dev.windowsphone.com and that they were reducing the cost of an individual developer account to $8 for the next 8 days. Let the development commence. del.icio.us Tags: Build 2012,Windows 8,Windows Phone 8,Windows Phone

  Read the article

• If not now, then when?

  - by Chris Gardner

  Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/10/25/if-not-now-then-when.aspx The time has been flying by this year. It seems like only yesterday that I mentioned the gorillagator, a simple construct of confusion to try to draw attention to my message. In reality, that message was sent over a month ago. During that time, the hours slipped to days and days to weeks. Many exciting things have happened to myself; I'm sure many exciting things have happened to you. I'm also sure that many terrifying things have happened to children and their families. 62 children enter treatment at a Children's Miracle Network Hospital every minute. That's nearly 60,000 children since I sent the last email. To put that number in perspective, that is more than the population of Greenland. If we expand that to the past year, they have been nearly 550,000 children treated. That is almost the population of Huntsville, Decatur, and all their suburbs combined. Over the past 4 years, I have raised a little more than $3,000 for Children's Hospital of Alabama. As a result, I received a call from the organizers of Extra Life thanking me for my dedicated work and informing me that I was the top supporters for Children's Hospital of Alabama ... with my measly three grand. We can do much better than that. It may sound like I'm trying to have fun by playing games for 24 hours. It is more than that. It is me using my time and body as a catalyst. It is me putting my passion to work for a cause. It is me turning my love into something tangible. I have been campaigning and fighting to give these children a chance for years. I have been asking you to help me support these children and families. I've been putting in countless hours of talking to people, impassioned emails, and carefully constructed tweets. I have been fighting with cutting edge, and sometimes expensive, technology to try to provide live streams of my marathons. I yearly put my body through 24 (and, this year, 25) hours of no sleep. I do this to represent the countless hours these families sit awake at their children's side. All I ask is a few minutes on a website and a few dollars. These few minutes and few dollars go a long way help people that are experiencing circumstances that only occur in our nightmares. I also ask that you take one extra step. Forward this plea to those that you know. I can only reach a small fraction of a percentage of the people that may be able to help. Together, we can reach the world. I raise money for Children's Hospital of Alabama. As this message branches out, people may wish to support a hospital closer to their area. I have included a link to the list of people that have dedicated their time and have received no donations. Find someone on the list supporting your local hospital and give them a donation. Let them know that their time and effort are appreciated. Together, we can do something great. Together, we can make a difference. Together, we all stand tall. Thank you. You can get more information at http://www.extra-life.org and http://childrensmiraclenetworkhospitals.org/" My donation page is http://www.extra-life.org/participant/cgardner The list of participants without donations is http://www.extra-life.org/index.cfm?fuseaction=donorDrive.eventParticipantList&page=629&eventID=512

  Read the article

• How the SPARC T4 Processor Optimizes Throughput Capacity: A Case Study

  - by Ruud

  This white paper demonstrates the architected latency hiding features of Oracle’s UltraSPARC T2+ and SPARC T4 processors That is the first sentence from this technical white paper, but what does it exactly mean? Let's consider a very simple example, the computation of a = b + c. This boils down to the following (pseudo-assembler) instructions that need to be executed: load @b, r1 load @c, r2 add r1,r2,r3 store r3, @a The first two instructions load variables b and c from an address in memory (here symbolized by @b and @c respectively). These values go into registers r1 and r2. The third instruction adds the values in r1 and r2. The result goes into register r3. The fourth instruction stores the contents of r3 into the memory address symbolized by @a. If we're lucky, both b and c are in a nearby cache and the load instructions only take a few processor cycles to execute. That is the good case, but what if b or c, or both, have to come from very far away? Perhaps both of them are in the main memory and then it easily takes hundreds of cycles for the values to arrive in the registers. Meanwhile the processor is doing nothing and simply waits for the data to arrive. Actually, it does something. It burns cycles while waiting. That is a waste of time and energy. Why not use these cycles to execute instructions from another application or thread in case of a parallel program? That is exactly what latency hiding on the SPARC T-Series processors does. It is a hardware feature totally transparent to the user and application. As soon as there is a delay in the execution, the hardware uses these otherwise idle cycles to execute instructions from another process. As a result, the throughput capacity of the system improves because idle cycles are no longer wasted and therefore more jobs can be run per unit of time. This feature has been in the SPARC T-series from the beginning, so why this paper? The difference with previous publications on this topic is in the amount of detail given. How this all works under the hood is fully explained using two example programs. Starting from the assembly language instructions, it is demonstrated in what way these programs execute. To really see what is happening we go down to the processor pipeline level, where the gaps in the execution are, and show in what way these idle cycles are filled by other copies of the same program running simultaneously. Both the SPARC T4 as well as the older UltraSPARC T2+ processor are covered. You may wonder why the UltraSPARC T2+ is included. The focus of this work is on the SPARC T4 processor, but to explain the basic concept of latency hiding at this very low level, we start with the UltraSPARC T2+ processor because it is architecturally a much simpler design. From the single issue, in-order pipelines of this processor we then shift gears and cover how this all works on the much more advanced dual issue, out-of-order architecture of the T4. The analysis and performance experiments have been conducted on both processors. The results depend on the processor, but in all cases the theoretical estimates are confirmed by the experiments. If you're interested to read a lot more about this and find out how things really work under the hood, you can download a copy of the paper here. A paper like this could not have been produced without the help of several other people. I want to thank the co-author of this paper, Jared Smolens, for his very valuable contributions and our highly inspiring discussions. I'm also indebted to Thomas Nau (Ulm University, Germany), Shane Sigler and Mark Woodyard (both at Oracle) for their feedback on earlier versions of this paper. Karen Perkins (Perkins Technical Writing and Editing) and Rick Ramsey at Oracle were very helpful in providing editorial and publishing assistance.

  Read the article

• SharePoint: Numeric/Integer Site Column (Field) Types

  - by CharlesLee

  What field type should you use when creating number based site columns as part of a SharePoint feature? Windows SharePoint Services 3.0 provides you with an extensible and flexible method of developing and deploying Site Columns and Content Types (both of which are required for most SharePoint projects requiring list or library based data storage) via the feature framework (more on this in my next full article.) However there is an interesting behaviour when working with a column or field which is required to hold a number, which I thought I would blog about today. When creating Site Columns in the browser you get a nice rich UI in order to choose the properties of this field: However when you are recreating this as a feature defined in CAML (Collaborative Application Mark-up Language), which is a type of XML (more on this in my article) then you do not get such a rich experience.  You would need to add something like this to the element manifest defined in your feature: <Field SourceID="http://schemas.microsoft.com/sharepoint/3.0"        ID="{C272E927-3748-48db-8FC0-6C7B72A6D220}"        Group="My Site Columns"        Name="MyNumber"        DisplayName="My Number"        Type="Numeric"        Commas="FALSE"        Decimals="0"        Required="FALSE"        ReadOnly="FALSE"        Sealed="FALSE"        Hidden="FALSE" /> OK, its not as nice as the browser UI but I can deal with this. Hang on. Commas="FALSE" and yet for my number 1234 I get 1,234.  That is not what I wanted or expected.  What gives? The answer lies in the difference between a type of "Numeric" which is an implementation of the SPFieldNumber class and "Integer" which does not correspond to a given SPField class but rather represents a positive or negative integer.  The numeric type does not respect the settings of Commas or NegativeFormat (which defines how to display negative numbers.)  So we can set the Type to Integer and we are good to go.  Yes? Sadly no! You will notice at this point that if you deploy your site column into SharePoint something has gone wrong.  Your site column is not listed in the Site Column Gallery.  The deployment must have failed then?  But no, a quick look at the site columns via the API reveals that the column is there.  What new evil is this?  Unfortunately the base type for integer fields has this lovely attribute set on it: UserCreatable = FALSE So WSS 3.0 accordingly hides your field in the gallery as you cannot create fields of this type. However! You can use them in content types just like any other field (except not in the browser UI), and if you add them to the content type as part of your feature then they will show up in the UI as a field on that content type.  Most of the time you are not going to be too concerned that your site columns are not listed in the gallery as you will know that they are there and that they are still useable. So not as bad as you thought after all.  Just a little quirky.  But that is SharePoint for you.

  Read the article

• Elo system behaves oddly in program I've created

  - by adc

  Alright, so I'm looking to build a small program (C# and XAML) that, essentially, does this: Generate array of players. Each player has a current rating and a true rating. I set current rating to 1200 as a starting point right now; I've also tried setting it to true rating and the average of the two. True rating is what their skill level actually is. Their true rating is calculated based on percentages from the current League of Legends rating system; generating an array of 970 thousand generates results very similar to the data from here: (removed due to URL limit - but trust me, the results are very similar). This array is of length specified by the user. If need be, sort the array from smallest to largest. Play X number of games, again specified by the user. This is done by taking the array of players (which is sorted by Current Rating after being created) and running through it in groups of 10. The first five are on team one, the second five are on team two. It then takes the True Rating of these players and calculates an expected chance to win using the Elo system. It generates a random double and compares it to the expected chance to win; if the number is lower, team one wins - otherwise team two wins. I then update the rating of the players via, again, the Elo system - giving the winning team a score of 1 and the losing team a score of 0. I use a K value of 36 (but have tried 12, 24, and even higher ones) and an F value of 400. After going through the entire loop of players (which I have conveniently forced to be a multiple of ten), it sorts the array - again via current rating. This, if my understanding of the Elo system is correct, runs properly. However, it doesn't seem to work. I have a running test telling me how many players of the full array are within 100 current rating of their true rating. I would expect some portion of the population to be outside this range (as probability is not always going to go in their favor), but a full 40-45% of the population is outside of this range. I also have it outputting the maximum difference between true and current rating - and I have never seen this drop below 500! It hovers between 550-600, occasionally going over or under. I'm at a loss as to what to change - I've fiddled with the K and F values, where I start all the players, etc. but nothing changes the fact that eventually a good 40% of the population is outside the range. And it isn't that I have it playing too few games - it's now run through over 60 thousand games and the problem never disappears or really fluctuates. The full C# code, including everything except the XAML file and the Player class (pastebin is being very slow and I can only post two links, so I can't link to the XAML file): http://pastebin.com/rFcZRL84 The Player class: http://pastebin.com/4cJTdTRu I guess my question is did I do anything wrong? Is there a problem with the way I implemented the system, or is it just that Riot uses a significantly modified Elo system? I don't think it's the latter, as that still wouldn't explain the massive true and current rating differences to me, however.

  Read the article

• 11.10 desktop alerts (volume change and terminal bell) stopped working but all other audio still works

  - by FlabbergastedPickle

  All, My sound works just fine in 11.10 64-bit install on HP dm1-4050 Sandy Bridge notebook (e.g. audio works in Banshee, flash, games, browser, Thunderbird email notification, etc.), but the core desktop notifications (e.g. pressing a tab in a terminal where there is more than one option should trigger a terminal bell, or changing volume using volume keys should be accompanied with the supporting "quack" that the volume app makes) do not work. I've intentionally disabled login sound as explained here on ask ubuntu but even enabling it back makes no difference. These notifications did work before just fine and I am not sure when did the actually stop working but it must've been fairly recently. Only things I did were trying to install some ppa edge xorg drivers for my intel card (a separate issue) but also reverted them all with ppa-purge once I discovered they did not improve anything. Other thing I did was check volume settings with alsamixer and did alsactl store for the soundcard after I did some experimenting with volume settings for PCM (on my laptop PCM at 100% crackles so I had to lower it and make pulseaudio ignore its setting as per ask ubuntu's page). That said, neither of these should have any bearing on the said notifications since the volume is up and they clearly work everywhere else but the core desktop events. The system ready drum sound when Ubuntu boots and user reaches the login screen also does not work. The guest login behaves exactly same as mine. Audio works (including the login sound since I've not disabled it for the guest account), but no quacks when changing the volume or terminal bell sounds... I've tried copying ubuntu sounds to /usr/share/sounds/ as suggested on ask ubuntu and that did not work. I also tried using dconf-editor to check sound theme settings and tried both freedesktop (which is what it was set to) and ubuntu, as suggested on ask ubuntu. This did not work either. I tried purging the ~/.pulse folder and the /tmp/*pulse* entries, rebooting and restarting pulseaudio with -D flag. While audio came back on and behaved just fine in all aspects (e.g. one can adjust volume levels, play music, games, in-browser sound stuff, and other app alerts) except for the system ready drum sound (at the login screen), and any system event (terminal bell and volume change quack sound). It is interesting that the quack sound works inside system settings-sound when adjusting levels there, but it does not when volume is changed via top bar's volume settings... I do recall that at one point yesterday when I was restarting pulseaudio the quacks that accompany volume change did start working but I have no idea what caused that. This was also when I first realized those alerts were not working. After rebooting it was again gone. I did compile my own 3.0.14-rt31 kernel a little while ago as instructed on one of the wiki's for the 11.10 rt kernel. Everything works as before except for the said sound alerts. I am not sure if this began happening since I started using the rt kernel though and yesterday's momentary ability to hear those quacks while changing the volume make me believe that the kernel is not one responsible for this problem. One more thing I can think of is that I used alsoft-conf tool to configure buffering on the OpenAL (due to TA Spring's choppy audio) and changed in there default audio device to ALSA. I also tried reverting it to Pulseaudio as the only allowed output but the bottom part of the Backend tab always reverts to ALSA even when I select Pulseaudio. The pulseaudio does remain as the only active choice on top. This, however, once again does not make any sense in terms of preventing desktop audio alerts when everything else including OpenAL games plays sound just fine... So, there you have it, as verbose as I could make it :-). I tried all I could find on this issue and had no luck so far... Any ideas?

  Read the article

• How to deploy global managed beans

  - by frank.nimphius

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} "Global managed" beans is the term I use in this post to describe beans that are used across applications. Global managed beans contain helper - or utility - methods like or instead of JSFUtils and ADFUtils. The difference between global managed beans and static helper classes like JSFUtis and ADFUtils is that they are EL accessible, providing reusable functionality that is ready to use on UI components and - if accessed from Java - in other managed beans. For example, the ADF Faces page template (af:pageTemplate) allows you to define attributes for the consuming page to pass in object references or strings into it. It does not have method attributes that allow command components contained in a template to invoke listeners in managed beans and the ADF binding layer, or to execute actions. To create templates that provide global button or menu functionality, like logon, logout, print etc., an option for developers is to deployed managed beans with the ADF Faces page templates. To deploy a managed bean with a page template, create an ADF library from the project containing the template definition and import this ADF library into the target project using the Resource palette. When importing an ADF library, all its content is added to the project, including page template definitions, managed bean sources and configurations. More about page templates http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/tagdoc/af_pageTemplate.html Another use-case for globally configured managed beans is for creating helper methods to be used in many applications. Instead of creating a base managed bean class that then is extended by all managed beans used in applications, you can deploy a managed bean in a JAR file and add the faces-config.xml file with the managed bean configuration to the JAR's META-INF folder as shown below. Using a globally configured managed bean allows you to use Expression Language in the UI to access common functionality but also use Java in application specific managed beans. Storing the faces-config.xml file in the JAR file META-INF directory automatically makes it available when the JAR file is found in the class path of an application.

  Read the article

• Good DBAs Do Baselines

  - by Louis Davidson

  One morning, you wake up and feel funny. You can’t quite put your finger on it, but something isn’t quite right. What now? Unless you happen to be a hypochondriac, you likely drag yourself out of bed, get on with the day and gather more “evidence”. You check your symptoms over the next few days; do you feel the same, better, worse? If better, then great, it was some temporal issue, perhaps caused by an allergic reaction to some suspiciously spicy chicken. If the same or worse then you go to the doctor for some health advice, but armed with some data to share, and having ruled out certain possible causes that are fixed with a bit of rest and perhaps an antacid. Whether you realize it or not, in comparing how you feel one day to the next, you have taken baseline measurements. In much the same way, a DBA uses baselines to gauge the gauge health of their database servers. Of course, while SQL Server is very willing to share data regarding its health and activities, it has almost no idea of the difference between good and bad. Over time, experienced DBAs develop “mental” baselines with which they can gauge the health of their servers almost as easily as their own body. They accumulate knowledge of the daily, natural state of each part of their database system, and so know instinctively when one of their databases “feels funny”. Equally, they know when an “issue” is just a passing tremor. They see their SQL Server with all of its four CPU cores running close 100% and don’t panic anymore. Why? It’s 5PM and every day the same thing occurs when the end-of-day reports, which are very CPU intensive, are running. Equally, they know when they need to respond in earnest when it is the first time they have heard about an issue, even if it has been happening every day. Nevertheless, no DBA can retain mental baselines for every characteristic of their systems, so we need to collect physical baselines too. In my experience, surprisingly few DBAs do this very well. Part of the problem is that SQL Server provides a lot of instrumentation. If you look, you will find an almost overwhelming amount of data regarding user activity on your SQL Server instances, and use and abuse of the available CPU, I/O and memory. It seems like a huge task even to work out which data you need to collect, let alone start collecting it on a regular basis, managing its storage over time, and performing detailed comparative analysis. However, without baselines, though, it is very difficult to pinpoint what ails a server, just by looking at a single snapshot of the data, or to spot retrospectively what caused the problem by examining aggregated data for the server, collected over many months. It isn’t as hard as you think to get started. You’ve probably already established some troubleshooting queries of the type SELECT Value FROM SomeSystemTableOrView. Capturing a set of baseline values for such a query can be as easy as changing it as follows: INSERT into BaseLine.SomeSystemTable (value, captureTime) SELECT Value, SYSDATETIME() FROM SomeSystemTableOrView; Of course, there are monitoring tools that will collect and manage this baseline data for you, automatically, and allow you to perform comparison of metrics over different periods. However, to get yourself started and to prove to yourself (or perhaps the person who writes the checks for tools) the value of baselines, stick something similar to the above query into an agent job, running every hour or so, and you are on your way with no excuses! Then, the next time you investigate a slow server, and see x open transactions, y users logged in, and z rows added per hour in the Orders table, compare to your baselines and see immediately what, if anything, has changed!

  Read the article

• PaaS, DBaaS and the Oracle Database Cloud Service

  - by yaldahhakim

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} As with many widely hyped areas, there is much more variation within the broad spectrum of products referred to as “Cloud” that is immediately apparent. This variation is evident in one of the key misunderstandings about the Oracle Database Cloud Service. People could be forgiven for thinking that the Database Cloud Service was a Database-as-a-Service (DBaaS), but this is actually not true. The Database Cloud Service is a Platform-as-a-Service, which presents a different user and developer interface and has a different set of qualities. A good way to think about the difference between these two varieties of Cloud offerings is that you, the customer, have to deal with things at the level of the offering, but not for anything below it. In practice, this means that you do not have to deal with hardware or system software, including installation and maintenance, for DBaaS. You also do not have much control over configuration of these options. For PaaS, you don’t have to deal with hardware, system software, or database software – and also do not have control over these levels in the stack. So you cannot modify configuration parameters for the database with the Database Cloud Service – your interface is through SQL and PL/SQL, with Application Express, included in the Database Cloud Service, or through JDBC for Java apps running in the Java Cloud Service, or through RESTful Web Services. You will notice what is not mentioned there – SQL*Net. You cannot access your Oracle Database Cloud Service by changing an entry in the TNSNames file and using SQL*Net. So the effort involved in migrating an existing Oracle Database in your data center to the Database Cloud Service may be prohibitive. The good news is that Application Express and the RESTful Web Services wizard in the Database Cloud Service allow you to develop new applications very quickly, and, of course, the provisioning of the entire Database Cloud Service takes only minutes.

  Read the article

• Observing flow control idle time in TCP

  - by user12820842

  Previously I described how to observe congestion control strategies during transmission, and here I talked about TCP's sliding window approach for handling flow control on the receive side. A neat trick would now be to put the pieces together and ask the following question - how often is TCP transmission blocked by congestion control (send-side flow control) versus a zero-sized send window (which is the receiver saying it cannot process any more data)? So in effect we are asking whether the size of the receive window of the peer or the congestion control strategy may be sub-optimal. The result of such a problem would be that we have TCP data that we could be transmitting but we are not, potentially effecting throughput. So flow control is in effect: when the congestion window is less than or equal to the amount of bytes outstanding on the connection. We can derive this from args[3]-tcps_snxt - args[3]-tcps_suna, i.e. the difference between the next sequence number to send and the lowest unacknowledged sequence number; and when the window in the TCP segment received is advertised as 0 We time from these events until we send new data (i.e. args[4]-tcp_seq = snxt value when window closes. Here's the script: #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::send / (args[3]-tcps_snxt - args[3]-tcps_suna) = args[3]-tcps_cwnd / { cwndclosed[args[1]-cs_cid] = timestamp; cwndsnxt[args[1]-cs_cid] = args[3]-tcps_snxt; @numclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = count(); } tcp:::send / cwndclosed[args[1]-cs_cid] && args[4]-tcp_seq = cwndsnxt[args[1]-cs_cid] / { @meantimeclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = avg(timestamp - cwndclosed[args[1]-cs_cid]); @stddevtimeclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = stddev(timestamp - cwndclosed[args[1]-cs_cid]); @numclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = count(); cwndclosed[args[1]-cs_cid] = 0; cwndsnxt[args[1]-cs_cid] = 0; } tcp:::receive / args[4]-tcp_window == 0 && (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { swndclosed[args[1]-cs_cid] = timestamp; swndsnxt[args[1]-cs_cid] = args[3]-tcps_snxt; @numclosed["swnd", args[2]-ip_saddr, args[4]-tcp_dport] = count(); } tcp:::send / swndclosed[args[1]-cs_cid] && args[4]-tcp_seq = swndsnxt[args[1]-cs_cid] / { @meantimeclosed["swnd", args[2]-ip_daddr, args[4]-tcp_sport] = avg(timestamp - swndclosed[args[1]-cs_cid]); @stddevtimeclosed["swnd", args[2]-ip_daddr, args[4]-tcp_sport] = stddev(timestamp - swndclosed[args[1]-cs_cid]); swndclosed[args[1]-cs_cid] = 0; swndsnxt[args[1]-cs_cid] = 0; } END { printf("%-6s %-20s %-8s %-25s %-8s %-8s\n", "Window", "Remote host", "Port", "TCP Avg WndClosed(ns)", "StdDev", "Num"); printa("%-6s %-20s %-8d %@-25d %@-8d %@-8d\n", @meantimeclosed, @stddevtimeclosed, @numclosed); } So this script will show us whether the peer's receive window size is preventing flow ("swnd" events) or whether congestion control is limiting flow ("cwnd" events). As an example I traced on a server with a large file transfer in progress via a webserver and with an active ssh connection running "find / -depth -print". Here is the output: ^C Window Remote host Port TCP Avg WndClosed(ns) StdDev Num cwnd 10.175.96.92 80 86064329 77311705 125 cwnd 10.175.96.92 22 122068522 151039669 81 So we see in this case, the congestion window closes 125 times for port 80 connections and 81 times for ssh. The average time the window is closed is 0.086sec for port 80 and 0.12sec for port 22. So if you wish to change congestion control algorithm in Oracle Solaris 11, a useful step may be to see if congestion really is an issue on your network. Scripts like the one posted above can help assess this, but it's worth reiterating that if congestion control is occuring, that's not necessarily a problem that needs fixing. Recall that congestion control is about controlling flow to prevent large-scale drops, so looking at congestion events in isolation doesn't tell us the whole story. For example, are we seeing more congestion events with one control algorithm, but more drops/retransmission with another? As always, it's best to start with measures of throughput and latency before arriving at a specific hypothesis such as "my congestion control algorithm is sub-optimal".

  Read the article

• Extrapolation breaks collision detection

  - by user22241

  Before applying extrapolation to my sprite's movement, my collision worked perfectly. However, after applying extrapolation to my sprite's movement (to smooth things out), the collision no longer works. This is how things worked before extrapolation: However, after I implement my extrapolation, the collision routine breaks. I am assuming this is because it is acting upon the new coordinate that has been produced by the extrapolation routine (which is situated in my render call ). After I apply my extrapolation How to correct this behaviour? I've tried puting an extra collision check just after extrapolation - this does seem to clear up a lot of the problems but I've ruled this out because putting logic into my rendering is out of the question. I've also tried making a copy of the spritesX position, extrapolating that and drawing using that rather than the original, thus leaving the original intact for the logic to pick up on - this seems a better option, but it still produces some weird effects when colliding with walls. I'm pretty sure this also isn't the correct way to deal with this. I've found a couple of similar questions on here but the answers haven't helped me. This is my extrapolation code: public void onDrawFrame(GL10 gl) { //Set/Re-set loop back to 0 to start counting again loops=0; while(System.currentTimeMillis() > nextGameTick && loops < maxFrameskip){ SceneManager.getInstance().getCurrentScene().updateLogic(); nextGameTick+=skipTicks; timeCorrection += (1000d/ticksPerSecond) % 1; nextGameTick+=timeCorrection; timeCorrection %=1; loops++; tics++; } extrapolation = (float)(System.currentTimeMillis() + skipTicks - nextGameTick) / (float)skipTicks; render(extrapolation); } Applying extrapolation render(float extrapolation){ //This example shows extrapolation for X axis only. Y position (spriteScreenY is assumed to be valid) extrapolatedPosX = spriteGridX+(SpriteXVelocity*dt)*extrapolation; spriteScreenPosX = extrapolationPosX * screenWidth; drawSprite(spriteScreenX, spriteScreenY); } Edit As I mentioned above, I have tried making a copy of the sprite's coordinates specifically to draw with.... this has it's own problems. Firstly, regardless of the copying, when the sprite is moving, it's super-smooth, when it stops, it's wobbling slightly left/right - as it's still extrapolating it's position based on the time. Is this normal behavior and can we 'turn it off' when the sprite stops? I've tried having flags for left / right and only extrapolating if either of these is enabled. I've also tried copying the last and current positions to see if there is any difference. However, as far as collision goes, these don't help. If the user is pressing say, the right button and the sprite is moving right, when it hits a wall, if the user continues to hold the right button down, the sprite will keep animating to the right, while being stopped by the wall (therefore not actually moving), however because the right flag is still set and also because the collision routine is constantly moving the sprite out of the wall, it still appear to the code (not the player) that the sprite is still moving, and therefore extrapolation continues. So what the player would see, is the sprite 'static' (yes, it's animating, but it's not actually moving across the screen), and every now and then it shakes violently as the extrapolation attempts to do it's thing....... Hope this help

  Read the article

• Essbase BSO Data Fragmentation

  - by Ann Donahue

  Essbase BSO Data Fragmentation Data fragmentation naturally occurs in Essbase Block Storage (BSO) databases where there are a lot of end user data updates, incremental data loads, many lock and send, and/or many calculations executed.  If an Essbase database starts to experience performance slow-downs, this is an indication that there may be too much fragmentation.  See Chapter 54 Improving Essbase Performance in the Essbase DBA Guide for more details on measuring and eliminating fragmentation: http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/daprcset.html Fragmentation is likely to occur in the following situations: Read/write databases that users are constantly updating data Databases that execute calculations around the clock Databases that frequently update and recalculate dense members Data loads that are poorly designed Databases that contain a significant number of Dynamic Calc and Store members Databases that use an isolation level of uncommitted access with commit block set to zero There are two types of data block fragmentation Free space tracking, which is measured using the Average Fragmentation Quotient statistic. Block order on disk, which is measured using the Average Cluster Ratio statistic. Average Fragmentation Quotient The Average Fragmentation Quotient ratio measures free space in a given database.  As you update and calculate data, empty spaces occur when a block can no longer fit in its original space and will either append at the end of the file or fit in another empty space that is large enough.  These empty spaces take up space in the .PAG files.  The higher the number the more empty spaces you have, therefore, the bigger the .PAG file and the longer it takes to traverse through the .PAG file to get to a particular record.  An Average Fragmentation Quotient value of 3.174765 means the database is 3% fragmented with free space. Average Cluster Ratio Average Cluster Ratio describes the order the blocks actually exist in the database. An Average Cluster Ratio number of 1 means all the blocks are ordered in the correct sequence in the order of the Outline.  As you load data and calculate data blocks, the sequence can start to be out of order.  This is because when you write to a block it may not be able to place back in the exact same spot in the database that it existed before.  The lower this number the more out of order it becomes and the more it affects performance.  An Average Cluster Ratio value of 1 means no fragmentation.  Any value lower than 1 i.e. 0.01032828 means the data blocks are getting further out of order from the outline order. Eliminating Data Block Fragmentation Both types of data block fragmentation can be removed by doing a dense restructure or export/clear/import of the data.  There are two types of dense restructure: 1. Implicit Restructures Implicit dense restructure happens when outline changes are done using EAS Outline Editor or Dimension Build. Essbase restructures create new .PAG files restructuring the data blocks in the .PAG files. When Essbase restructures the data blocks, it regenerates the index automatically so that index entries point to the new data blocks. Empty blocks are NOT removed with implicit restructures. 2. Explicit Restructures Explicit dense restructure happens when a manual initiation of the database restructure is executed. An explicit dense restructure is a full restructure which comprises of a dense restructure as outlined above plus the removal of empty blocks Empty Blocks vs. Fragmentation The existence of empty blocks is not considered fragmentation.  Empty blocks can be created through calc scripts or formulas.  An empty block will add to an existing database block count and will be included in the block counts of the database properties.  There are no statistics for empty blocks.  The only way to determine if empty blocks exist in an Essbase database is to record your current block count, export the entire database, clear the database then import the exported data.  If the block count decreased, the difference is the number of empty blocks that had existed in the database.

  Read the article

• Comparing Apples and Pairs

  - by Tony Davis

  A recent study, High Costs and Negative Value of Pair Programming, by Capers Jones, pulls no punches in its assessment of the costs-to- benefits ratio of pair programming, two programmers working together, at a single computer, rather than separately. He implies that pair programming is a method rushed into production on a wave of enthusiasm for Agile or Extreme Programming, without any real regard for its effectiveness. Despite admitting that his data represented a far from complete study of the economics of pair programming, his conclusions were stark: it was 2.5 times more expensive, resulted in a 15% drop in productivity, and offered no significant quality benefits. The author provides a more scientific analysis than Jon Evans’ Pair Programming Considered Harmful, but the theme is the same. In terms of upfront-coding costs, pair programming is surely more expensive. The claim of productivity loss is dubious and contested by other studies. The third claim, though, did surprise me. The author’s data suggests that if both the pair and the individual programmers employ static code analysis and testing, then there is no measurable difference in the resulting code quality, in terms of defects per function point. In other words, pair programming incurs a massive extra cost for no tangible return in investment. There were, inevitably, many criticisms of his data and his conclusions, a few of which are persuasive. Firstly, that the driver/observer model of pair programming, on which the study bases its findings, is far from the most effective. For example, many find Ping-Pong pairing, based on use of test-driven development, far more productive. Secondly, that it doesn’t distinguish between “expert” and “novice” pair programmers– that is, independently of other programming skills, how skilled was an individual at pair programming. Thirdly, that his measure of quality is too narrow. This point rings true, certainly at Red Gate, where developers don’t pair program all the time, but use the method in short bursts, while tackling a tricky problem and needing a fresh perspective on the best approach, or more in-depth knowledge in a particular domain. All of them argue that pair programming, and collective code ownership, offers significant rewards, if not in terms of immediate “bug reduction”, then in removing the likelihood of single points of failure, and improving the overall quality and longer-term adaptability/maintainability of the design. There is also a massive learning benefit for both participants. One developer told me how he once worked in the same team over consecutive summers, the first time with no pair programming and the second time pair-programming two-thirds of the time, and described the increased rate of learning the second time as “phenomenal”. There are a great many theories on how we should develop software (Scrum, XP, Lean, etc.), but woefully little scientific research in their effectiveness. For a group that spends so much time crunching other people’s data, I wonder if developers spend enough time crunching data about themselves. Capers Jones’ data may be incomplete, but should cause a pause for thought, especially for any large IT departments, supporting commerce and industry, who are considering pair programming. It certainly shouldn’t discourage teams from exploring new ways of developing software, as long as they also think about how to gather hard data to gauge their effectiveness.

  Read the article

• WiX, MSDeploy and an appealing configuration/deployment paradigm

  - by alexhildyard

  I do a lot of application and server configuration; I've done this for many years and have tended to view the complexity of this strictly in terms of the complexity of the ultimate configuration to be deployed. For example, specific APIs aside, I would tend to regard installing a server certificate as a more complex activity than, say, copying a file or adding a Registry entry.My prejudice revolved around the idea of a sequential deployment script that not only had the explicit prescription to apply a specific server configuration, but also made the implicit presumption that the server in question was in a good known state. Scripts like this fail for hundreds of reasons -- the Default Website didn't exist; the application had already been deployed; the application had already been partially deployed and failed to rollback fully, and so on. And so the problem is that the more complex the configuration activity, the more scope for error in any individual part of that activity, and therefore the greater the chance the server in question will not end up at exactly the desired configuration level.Recently I was introduced to a completely different mindset, which, for want of a better turn of phrase, I will call the "make it so" mindset. It's extremely simple both to explain and to implement. In place of the head-down, imperative script you used to use, you substitute a set of checks -- much like exception handlers -- around each configuration activity, starting with a check of the current system state. Thus the configuration logic becomes: "IF these services aren't started then start them, and IF XYZ website doesn't exist then create it, and IF these shares don't exist then create them, and IF these shares aren't permissioned in some particular way, then permission them so." This works. Really well, in my experience. Scenario 1: You want to get a system into a good known state; it's already in a good known state; you quickly realise there is nothing to do.Scenario 2: You want to get the system into a good known state; your script is flawed or the system is bust; it cannot be put into that state. You know exactly where (at least part of) the problem is and why.Scenario 3: You want to get the system into a good known state; people are fiddling around with the system just now. That's fine. You do what you can, and later you come back and try it againScenario 4: No one wants to deploy anything; they want you to prove that the previous deployment was successful. So you re-run the deployment script with the "-WhatIf" flag. It reports that there was nothing to change. There's your proof.I mentioned two technologies in the title -- MSI and MSDeploy. I am thinking specifically of the conversation that took place here. Having worked with both technologies, I think Rob Mensching's response is appropriately nuanced, and in essence the difference is this: sometimes your target is either to achieve a specific new server state, or to rollback to a known good one. Then again, your target may be to configure what you can, and to understand what you can't. Implicitly MSDeploy's "rollback" is simply to redeploy the previous version, whereas a well-crafted MSI will actively put your system into that state without further intervention. Either way, if all goes well it will leave you with a system in one of two states, whereas MSDeploy could leave your system in one of many states. The key is that MSDeploy and MSI are complementary technologies; which suits you best depends as much on Operational guidance as your Configuration remit.What I wanted to say was that I have always been for atomic, transactional-based configuration, but having worked with the "make it so" paradigm, I have been favourably impressed by the actual results. I'm tempted to put a more technical post up on this in due course.

  Read the article

• Questions to ask to ensure someone understands programming? (and iOS)

  - by Stephen J

  So, I've been tutoring my friend for 2 years. Most people learn programming on their own in 3-6 months, (sans algorithms). It's confusing 'cause he'll run anywhere I tell him to, understands how to read C and C++ honestly better than the average college student, and he'll modify and repeat anything I do... but for the love of god he doesn't move on to new things and he still has test anxiety. I've recently realized he's copied and toyed with existing, but not once gained an understanding of why. I was under the impression he was learning fast because he could write it, but when you say "Make a function that takes an NSString" and he says "How?" and I say "The same way you make ANY function that takes any parameter, NSString is just a type like int" and all I hear is "No, it's an NSString, it's a special thing." and we get into an arguing match 'cause I'm like "It's just a class like any other class, you've used them for months now" and blah... I've subconsciously avoided comprehension questions because of this. Anyway, if you have him copy a program and say "Just initialize it" "Where?" "I don't care, didLoad or initWithCoder or Awake from nib, anywhere it gets initialized" and "No, it has to be exactly where you had it!" "No it doesn't!" I'm sick of this, but he won't give up. So I'm done avoiding these yelling matches and becoming a sadist from now on. I would like some help in finding questions to ask him that force him to understand what he's doing. I'd like some help and any resources I can find. CQuestions looked like a good site, but now I need some iPhone stuff. For example: *What do properties do? How are they changed? How do you change the name of the getter? *Why are Booleans inefficent? What advantage does int have over a boolean and how does the bit-shift operator help? *What does Copy do to a string? *What's the difference between a view controller and a uiview? *Write a program from memory that displays blah on screen, and flashes each view one by one. From beginner up to intermediate, hobbyist with some algebra at most. I'm just looking for resources to work with. I left in backstory so you know to "twist" the questions so he doesn't know he's supposed to init a variable here or there, but has to figure it out, and learn why it goes "here" or that "anywhere is fine as long as it's". Sample programs, anything. I'm relatively open about this because, being a programmer, I seriously doubt he's the only one who has this issue. I'd like to know how others have overcome similar. What made things "click"? for you? Did you have a hard time finding answers on Google, and how did you learn a better way to find what you were looking for? (He's so exact, he'll search for how to write a checkers program with color X and Y inside a uiview, as his search string, instead of breaking it up into components, I need help with that too, and believe it is related). This type of problem has to remind one of us of someone they know. So, Exercises to force them to think? Ways we overcame this thing in the past? I greatly appreciate any help.

  Read the article

• Test your internet connection - Emtel Fixed Broadband

  Already at the begin of April, I had a phone conversation with my representative at Emtel Ltd. about some upcoming issues due to the ongoing construction work in my neighbourhood. Unfortunately, they finally raised the house two levels above ours, and of course this has to have a negative impact on the visibility between the WiMAX outdoor unit on the roof and the aimed access point at Medine. So, today I had a technical team here to do a site survey and to come up with potential solutions. Short version: It doesn't look good after all. The site survey Well, the two technicians did their work properly, even re-arranged the antenna to check the connection with another end point down at La Preneuse. But no improvements. Looks like we are out of luck since the construction next door hasn't finished yet and at the moment, it even looks like they are planning to put at least one more level on top. I really wonder about the sanity of the responsible bodies at the local district council. But that's another story. Anyway, the outdoor unit was once again pointed towards Medine and properly fixed with new cable guides (air from the sea and rust...). Both of them did a good job and fine-tuned the reception signal to a mere 3 over 9; compared to the original 7 over 9 I had before the daily terror started. The site survey has been done, and now it's up to Emtel to come up with (better) solutions. Well, I wouldn't mind to have an unlimited, symmetric 3G/UMTS or even LTE connection. Let's see what they can do... Testing the connection There are several online sites available which offer you to check certain aspects of your internet connection. Personally, I'm used to speedtest.net and it works very well. I think it is good and necessary to check your connection from time to time, and only a couple of days ago, I posted the following on Emtel's wall at Facebook (21.05.2013 - 14:06 hrs): Dear Emtel, could you eventually provide an answer on the miserable results of SpeedTest? I chose Rose Hill (Hosted by Emtel Ltd.) as testing endpoint... Sadly, no response to this. Seems that the marketing department is not willing to deal with customers on Facebook. Okay, over at speedtest.net you can use their Flash-based test suite to check your connection to quite a number of servers of different providers world-wide. It's actually very interesting to see the results for different end points and to compare them to each other. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 30.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Fixed Broadband) Speedtest.net result of 30.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Fixed Broadband) Luckily, the results are quite similar in terms of connection speed; which is good. I'm currently on a WiMAX tariff called 'Classic Browsing 2', or Fixed Broadband as they call it now, which provides a symmetric line of 768 Kbps (or roughly 0.75 Mbps). In terms of downloads or uploads this means that I would be able to transfer files in either direction with approximately 96 KB/s. Frankly speaking, thanks to compression, my choice of browser and operating system I usually exceed this value and I have download rates up to 120 KB/s - not too bad after all. Only the ping times are a little bit of concern. Due to the difference in distance, or better said based on the number of hubs between the endpoints, they indicate the amount of time that it takes to send a package from your machine to the remote server and get a response back. A lower value is better, and usually the ping is less than 300 ms between Mauritius and Europe. The alternatives in Mauritius Not sure whether I should note this done because for my requirements there are no alternatives to Emtel WiMAX at the moment. It would be great to have your opinion on the situation of internet connectivity in Mauritius. Are there really alternatives? And if so, what are the conditions?

  Read the article

• jQuery - discrepency between classname and selectors

  - by Ciel

  I have the following code that I wrote, which I personally found to be pretty nice. It takes a <ul> and it drops down the contents when clicked. But I am having a disconnect here in comprehension, and one I had to do what I feel is a 'dirty hack' to solve. The problem is that I do not want the class `'sidebar-dropdown-open' to be so 'hardwired' in the plugin. However I discovered that there is a very stark difference between... $('.sidebar-dropdown-open') and 'sidebar-dropdown-open and even '.sidebar-dropdown-open. I 'solved' this problem by including two different 'parameters' in my plugin, but I was wondering if someone might give me some insight as to how I could perform this better, and why this was behaving this way. wiring (document load) $(document).ready(function () { $('[data-role="sidebar-dropdown"]').drawer({ open: 'sidebar-dropdown-open', css: '.sidebar-dropdown-open' }); }); html <ul> <li class=" dropdown" data-role="sidebar-dropdown"> <a href="pages/.." class="remote">Link Text</a> <ul class="sub-menu light sidebar-dropdown-menu"> <li><a class="remote" href="pages/...">Link Text</a></li> <li><a class="remote" href="pages/...">Link Text</a></li> <li><a class="remote" href="pages/...">Link Text</a></li> </ul> </li> </ul> javascript (function ($) { $.fn.drawer = function (options) { // Create some defaults, extending them with any options that were provided var settings = $.extend({ open: 'open', css: '.open' }, options); return this.each(function () { $(this).on('click', function (e) { // slide up all open dropdown menus $(settings.css).not($(this)).each(function () { $(this).removeClass(settings.open); // retrieve the appropriate menu item var $menu = $(this).children(".dropdown-menu, .sidebar-dropdown-menu"); // slide down the one clicked on. $menu.slideUp('fast'); $menu.removeClass('active'); }); // mark this menu as open $(this).addClass(settings.open); // retrieve the appropriate menu item var $menu = $(this).children(".dropdown-menu, .sidebar-dropdown-menu"); // slide down the one clicked on. $menu.slideDown(100); $menu.addClass('active'); e.preventDefault(); e.stopPropagation(); }).on("mouseleave", function () { $(this).children(".dropdown-menu").hide().delay(300); }); }) }; })(jQuery); I have tried using settings.open and demanding that it just be a className (.open), etc. - but that does not seem to work. It seems to get ignored by the removeClass function.

  Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >