Search Results

Search found 11747 results on 470 pages for 'music manager'.

Page 294/470 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

  • No compatible network card

    - by sbintcliffe
    Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

    Read the article

  • PEN daemon as load balancer, IIS web logs not showing true requester IPs

    - by Aszurom
    I have a Hercules vmware appliance, which is a micro-linux vm that runs the PEN daemon and acts as a server load-balancer. It takes any incoming request on the appliance's IP and routes it out to a number of alternate IPs. The logs of the daemon show the true IP of the browsers hitting the website. The logs of the websites themselves (iis 6 and 7) only show the requester IP as being that of the load balancer. The IT manager tells me that when we had a hardware appliance (serveriron XL) doing the load balancing, the web logs reflected the requester IPs accurately. Is there any way to get this resolved with the daemon, or will I be digging that out of the closet and plugging it back in?

    Read the article

  • Can DPM 2007 back up Active Directory?

    - by rbeier
    We're installing Microsoft Data Protection Manager 2007 - we'll be using it to back up Exchange and SQL Server among other things. Does anyone know if DPM can also back up Active Directory? It sounds like the answer is "not really". You can install the DPM agent on a domain controller and make system state backups. But if your Active Directory is out of commission, there will be no way to restore the backups, since DPM depends on AD. Currently we're just using Windows Backup (ntbackup) to take system state backups on one of the DCs. Should we just continue with that? Thanks, Richard

    Read the article

  • Secondary drive corrupted/not reading

    - by Sebastian
    When I connect my Seagate Barracuda to the computer, it shows up on the list of drives in Windows Explorer, but right clicking on it crashes Windows Explorer, opening it won't do anything, and I cannot start disk manager when it is connected. Trying to search the drive also freezes Windows Explorer. I have tried to run CHKDSK on it, and it was "unable to read $J data stream" for the Usn Journal. Also, it was an internal drive, but I pulled it out and hooked it up externally so I could test if it was that drive causing the problems. Is there any way for me to copy the files off of the drive?

    Read the article

  • How to remap media keys on laptop,without external programs?

    - by polemon
    As on most laptops, my laptop has "special" keys, or media keys, as they are sometimes called. On Linux, I can easily read keycodes with things like xev, put other functions back to it. Either with xmodmap or by simply giving the keys functions in my window manager. How is that possible on Windows? Is there even a way to scan those keys and remap them? Possibly even give them different functions as on Linux? If so, where do I do that? I heard of several programs atempting on changing that, but I don't see why I should install another program. I see it as integral part of the OS. For instance, I have a key with an 'i' in a circle. It normally opens a new browser window. When Chrome is already open, it makes the current tab go to my selected homepage (which is about:blank). I'd like to change the functionality of it.

    Read the article

  • standard keyboard doesn't work, but hotkeys do.

    - by alureonissue
    I posted earlier, but I've learned more about the problem since. (windows xp sp3) AVAST found alureon in kbdclass.sys and atapi.sys. I quarantined both files and restarted. keyboard and cdrom weren't working. I uninstalled them in device manager and updated the drivers. That fixed the cdrom but not the keyboard. Oddly, the keyboard hotkeys work (the row of special keys across the top for calculator, windows explorer, mail, browser) but the standard keys do not. I uninstalled and reinstalled SP3 to no avail. Any advice? not sure if I should have reposted this but I thought the hotkeys working might be an important point left out in the first post. Sorry if I'm doing this wrong ;/

    Read the article

  • Can't change (enable/disable) features on Windows 7

    - by Cristy
    I can't make any changes to Windows Features. Even if I just enter in Windows Features and press Ok I get: "An error has occured. Not all of the features were successfully changed." I noticed this while trying to install/uninstall IIS. If I try to install IIS from the Web Platform I get: [Windows package manager] The referenced assembly could not be found. Operation failed with 0x80073701 Any suggestions? EDIT: I have tried - Startup Repair. It says it has found problems but is unable to solve them - System restore (but didn't had an early enough restore point) :(

    Read the article

  • What causes random clicking/navigation sound while PC is idle?

    - by Jim Linny
    On my Dell D630 laptop running Windows XP Pro SP3, I randomly hear the "Windows Navigation Start.wav" played. This happens even if the only application active on the PC at the time is Microsoft Outlook and no one is touching the keyboard or touchpad. The start navigation sound IS enabled for Internet Explorer (I have IE 7 installed), but it is not running (no window open, anyway). The clicks are rapid, as if being executed automatically by a script or process, and they always come in threes: "click-click, click". I don't see any changes on the display and I don't know how to figure out what's running that could cause this. I have tried to leave Windows Task Manager open in the hope that I'll see a process name jump to the top of the list briefly, but it doesn't happen that often and I guess I'm not quick enough. The PC is slower than I think it should be, but System Idle Process is at 96 - 99 during the event, and for most of the time when I'm not actually using the machine. Any ideas?

    Read the article

  • my windows xp sp3 diagnostick:windows could not detect any wired or wireless network cards installed on your machine

    - by Yosef
    Problem: cant connect to internet with my new installation of windows xp sp3. Details: I have ubuntu in pc that worked with wired internet. i format all disk and install windows xp sp3. i have auto internet that defined in my router - other computers have internet. I run diagnoze of ie and get: windows could not detect any wired or wireless network cards installed on your machine In Device Manager i have only 1394 Adapter I dont see any internet adapters. Edit: I find with ubuntu livecd that i have hardware:82566dc gigabit network connection Thanks

    Read the article

  • Restoring factory image of HP Laptop

    - by Ahmed
    I use a HP G62. I am unable to use my recovery disk to restore to factory settings. I had no problems earlier until I created an additional partition which I hear might have changed my hard disk to dynamic. How do I get back to 'normal'? I don't mind formatting the disk. I just want my factory OS back. .............. i get an error message at about 69 percent telling me that the restoration process failed. I'm using the factory image disks i created using the hp recovery manager. I have tried formating the hard drive clean and then restoring woth the cd, it didn't work. I was always able to restore before i created that partition.

    Read the article

  • Formatted a Bootcamped drive as a dynamic disk, now can't boot to either Mac or Windows

    - by Steven H
    I was trying to create an extra partition to get a file from the Windows side of my Macbook Air to the Mac side, and I accidentally made the disk dynamic without realizing it. I am now unable to boot to the Mac side (holding Alt to go into the system manager at startup doesn't even list the Mac partition), and the Windows side blue screens during boot (goes so quickly that it doesn't even get to the error code before restarting). What can I do to fix the issue? I don't know how to make a bootable flash drive that a Mac will recognize, and Disk Utility (via Internet Recovery) couldn't do anything. (cross-posted from apple.stackexchange)

    Read the article

  • Unable to connect to the Report Server

    - by pghcpa
    Win/7 Professional SQL Server 2008 R2 Express Reporting Services Configuration Manager When I launch it, shows correct Server Name, but report server instance is blank. When I press FIND I get: "Unable to connect to the Report Server " This is my development workstation, so no IIS installed. Seems to work fine on XP. SSMS works fine - no issues. I tried uninstalling SQL Server completely, rebooting, reinstalling a fresh download. Same result. I've googled every article I can find - nothing. Can anyone point me in the right direction in case you've come across this yourself? Thanks.

    Read the article

  • mysql settings - using the available resources

    - by Christian Payne
    I've got a lot of processing work I need to run on a mysql server. I've installed mysql 5.1.45-community on a Win 2007 64bit. Its running on a xenon, 3ghz 6 processors with 8 gig ram. It doesn't seem to matter what queries I run (or the number I run at the same time), when I look in task manager, I'll see one processor is out at 100%. The other 5 are idol. Memory is static at 1.54 gig. When I installed mysql, I used the wizard and selected the default "server" (not workstation) option. I feel like I should be getting more bang for my buck. Is there something else I should be monitoring or something I should change to use the other system resources???

    Read the article

  • Subdomains for different applications on Windows Server 2008 R2 with Apache and IIS 7 installed

    - by Yusuf
    I have a home server, on which I have installed Apache, and several other applications that have a Web GUI (JDownloader, Free Download Manager). In order to access each of these apps (whether be it from the local network or the Internet), I have to enter a different port, e.g., http://server:8085 or http://xxxx.dyndns.org:8085 for Apache http://server:90 or http://xxxx.dyndns.org:90 for FDM http://server:8081 or http://xxxx.dyndns.org:8081 for JDownloader I would like to be able to access them using sub-domains, e.g, http://apache.server or http://apache.xxxx.dyndns.org for Apache, http://fdm.server or http://fdm.xxxx.dyndns.org for FDM, http://jdownloader.server or http://jdownloader.xxxx.dyndns.org for JDownloader First of all, would it be possible like I want it, i.e., both from LAN and Internet, and if yes, how? Even if it's possible only for Internet, I would like to know how to do it, if there's a way.

    Read the article

  • BCM 2007 not opening contacts...

    - by Christopher
    Business Contact Manager for Outlook (2007) is refusing to open contacts. This problem appeared this morning on every machine (Windows XP SP3) on our network. The contact list does populate as normal, and contacts can be printed from the context menu, but the form that displays the contact information does not display, and no error message is thrown. I have turned on logging for BCM in the help menu, but nothing is being generated (or, leastways, I cannot find it anywhere). The SQL services appear to have started as normal. Anyone come across this before I take a deep breath and go with my boss' suggestion of "just reboot the server"? Any other information you need? Thanks.

    Read the article

  • Slower than expected 802.11n wireless network speeds

    - by Ian
    I have two ASUS laptops running Windows 7 connected wirelessly via 802.11n at 150 Mbit, as reported by Task Manager. The router is Netgear WNDR3700. When testing the wireless connection speed using iperf, I'm not getting nearly 150 Mbit: C:\>iperf -c 10.0.0.123 -t 30 ------------------------------------------------------------ Client connecting to 10.0.0.123, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 10.0.0.116 port 53819 connected with 10.0.0.123 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-30.0 sec 41.2 MBytes 11.5 Mbits/sec That's a typical result. Running parallel client threads does not increase the overall total speed. Why would I only be getting 11.5 Mbit on a 150 Mbit connection?

    Read the article

  • Change my MX record on my server to google MX?

    - by Dejan.S
    Hi. I got a windows server 2008 where I host a site, now I decided to have the email on google apps. I did add the MX records I get from them to my DNS settings on the server but with no luck. I recently started doing server stuff so I did like this. Server Manager / Roles / DNS Server / DNS / SERVERNAME / MYDOMAIN / Forward Lookup / New MX Host or child domain: What goes here? FQDN: here is my domain name, i think because I named the ns my domain? FQDN MX: here is the google MX record I got from them MSP: 10 I have no Idea where I go wrong but I thought I would ask you guys if any of you can maybe give me some tips on what to look for or any newbee mistake I do that you see from this little info. I really appreciate all help I could get on this.

    Read the article

  • Domain points me to some malicious URL and I can't get rid of it

    - by Legend
    Whenever I enter my URL into the browser, it keeps pointing me to http://fornax.myvnc.com/dev The URL doesn't even work and my antivirus doesn't complain about it so I am not sure what is happening. I logged into my domain manager at godaddy and it says that the nameservers are pointing to: NS46.DOMAINCONTROL.COM and I am not sure where this came from either because my hosting is with lunarpages whose nameserver is NS1.LUNARMANIA.COM I tried looking into my .htaccess and it is blank. My index.php was hijacked with some malicious code so I removed it completely. Everything is supposed to be normal now but still some kind of a redirection is taking place and am not sure where this is happening. Any suggestions?

    Read the article

  • Create mirror software raid with bad blocks hdd. How to check data integrity?

    - by rumburak
    There is error in System event log like this one: "The device, \Device\Harddisk1\DR1, has a bad block." Because of above I created Raid 1 on this disk and other one. I'm using Windows Server 2008 R2 software RAID volumes. Volume in Disk Manager is marked as "Failed Redundancy" and "At Risk". I could command to "Reactivate Disk" and it's starts to re-sync, but after a while it stops and returns to previous state. It stops re-sync on bad block on old disk and creates same error in System event log. Old disk status is Errors, new disk status is Online. How can I check that there is exact copy of the old disk on new one ? It is server machine so I would prefer to keep it running during this check.

    Read the article

  • Asus G53SX How to use the recovery partition

    - by Amento
    I am trying to use the recovery partition on my Asus G53SX laptop, but the instructions in the included booklet don't match up with what happens on the computer. It says press F9 during bootup and then press ENTER to select windows setup. Then select the language you want to recover, and so on. When I press F9 I end up in the boot manager and from there I can access safe mode and all these things. The closest thing I can find in this list is "Repair your computer" but this menu takes me to recovery points and backup images, none which are mentioned in the booklet. How can I use the recovery partition to restore my laptop to factory state?

    Read the article

  • How to crash a program

    - by user2949019
    I have a program called BlueCoat Proxy installed on my school issued laptop that basically blocks every second website on the Internet, including stack exchange, YouTube and yahoo answers. I do not have administrator rights, nor can I delete anything in program files, I tried every possible method of obtaining admin rights. It is not accessible in task manager (it doesn't even appear there). I tried to close it with Windows command prompt through commands like 'taskkill' but it returns 'Access is Denied' (I'm only denied access with that program). Does anyone know a method of crashing a program with a batch file or VB program? I was thinking something like the ping command, though for a program. Maybe automating 1000 meaningless requests to the program? Your input on the subject matter is appreciated, however telling me that this is wrong or illegal is not.

    Read the article

  • Hyper-Threading and Dual-Core, What's the Difference?

    - by Josh Stodola
    In a conversation with the network administator, I mentioned that my machine was a dual-core. He told me it was not. I brought up the task manager, went to the perfomance tab, and showed him that there are two separate CPU usage graphs. I have a quad-core machine at home and it has four graphs. He told there were two graphs on this particular machine because of hyper-threading. I used to have a hyper-thread pentium 4 processor back in the day, but I never fully understood what it meant. So what is the difference between hyper threading and dual-core? And how do you tell which one you have?

    Read the article

  • Where does apache store initialization state for mod_proxy_balancer

    - by khoxsey
    I run apache2 on Ubuntu as a caching load-balancing reverse proxy in front of a group of application servers. I have noticed that the balancer maintains some state for some of the attributes visible in /balancer-manager such as whether an IP is enabled/disabled, load factor, etc. My site has periods of high (and low) usage, and recently as I added a new server to the working group I noticed that the load balancer picked up the new server but had it set to Disabled. I'm curious where that data is stored, and/or how it is initialized.

    Read the article

  • How to bind Apache to specific IP and port on Windows Server 2008

    - by webworm
    I have a Windows Server 2008 R2 that I use to host various ASP.NET applications under IIS7. I would also like to run various PHP based web apps using Apache (or Apache 2). The server has three static IP addresses assigned to it and I would like to bind one of the IP addresses to Apache while using the other two IP addresses for IIS. I can use the IIS Manager to bind the specific IP addresses to IIS, but I am unaware of how to do this with Apache. Can anyone tell me how to go about binding Apache to a specific IP address and port (port 80 is what I want to use). Please note .. I am aware that PHP can run under IIS. In fact that is how I have been running my PHP web applications. However, there are so many inconsistencies and pitfalls with PHP running under IIS that I just prefer to use Apache.

    Read the article

  • How to run UNetBootin (or similar) on Linux?

    - by zharvey
    I am trying to install UNetbootin on my Linux Mint (12 - KDE) machine and it will not run. I downloaded the Linux version of it (downloads as a unetbootin-linux-581 file) and set its permission to chmod +x unetbootin-linux-581. I've tried running it every way I can think of: Double-clicking it from the dolphin file manager Running ./unetbootin-linux-581 Running sh ./unetbootin-linux-581 Running unetbootin-linux-581.sh Nothing seems to be working. So I downloaded it on my Linux Ubuntu (12.04) machine, in case UNetbootin doesn't run on Mint for some reason, and am getting the same results. How do I run it, or what do I need to do to be able to run it?!? Thanks in advance!

    Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >