Search Results

Search found 8224 results on 329 pages for 'sometimes'.

Page 294/329 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

• Some DHCP clients end up with wrong DNS server

  - by Nic Waller

  The scenario: DC running Windows Server 2008 R2 providing DNS + DHCP Cisco 1811 Router as the gateway 30 Windows XP DHCP clients on the LAN The problem: Some workstations are spontaneously switching to an incorrect DNS server. Specifically, ipconfig /all shows that they start using the gateway as a DNS server. This happens about 5-10 times a day to various computers, sometimes more than once per day. The workaround: Repairing the connection on the XP client always fixes the problem, and the correct DNS server address is obtained. We lost our main DNS/DHCP machine a week ago, and had to bring this one online as a spare. We've been having this issue since then. DHCP leases on the old and new servers are configured for "wired" (8 day) duration. There are definitely no other DHCP servers active on the LAN. So far there is no discernible pattern about which clients will show this problem, or when. When I ran DCDIAG /test:DNS it came back clean. Manual inspection of the DNS zone shows that all the records are appearing as expected, with no traces of the previous machine in there. Update Feb 27: Added screenshots. Here is a screenshot of the DHCP scope options on the 2008 R2 server. And here is a screenshot of ipconfig /all running on a healthy host. I don't have any ailing hosts at the moment, but will grab a screencap next time it happens. Update Feb 28: More screenshots. Here's a screenshot of DHCP and DNS traffic from a healthy client when repairing the local area connection. There's definitely only one server responding, but it does seem strange that the negotiation takes place twice. I'll try to get a similar capture from a sick machine this coming week. Update Mar 01: Caught a bad ipconfig. Here's a screenshot of ipconfig /all from a client that had this issue. It says the lease was issued this morning, but it doesn't even have an entry for the secondary DNS I set up yesterday. Both DNS servers were discovered properly when repairing the connection. Update Mar 01: It even got the sysadmin! This issue finally affected my personal workstation this morning. Unfortunately I had just rebooted and wasn't running a packet dump at the time. I set up a secondary server yesterday, and was logging all DNS traffic to it. My machine had not contacted the secondary DNS in over half an hour, so that says to me that it's just spontaneously reverting to the gateway without even failing over to secondary DNS first. Today I swapped the order of the DNS servers in DHCP, so the secondary is primary and vice versa. I will update again once I know how that goes.

  Read the article

• Configure Postfix to Port other than 25

  - by bwheeler96

  I've done quite a bit of googling on how to reconfigure postfix to work on a different port, but I still can't fond the line(s) people keep talking about in my master.cf. I'm using OS X Mountain Lion, and my ISP blocks traffic both ways on port 25. people have said to look for a line that says smtp inet n - n - - smtpd I can't find it. This is (what I believe to be) unmodified # ==== Begin auto-generated section ======================================== # This section of the master.cf file is auto-generated by the Server Admin # Mail backend plugin whenever mails settings are modified. smtp inet n - n - 1 postscreen smtpd pass - - n - - smtpd dnsblog unix - - n - 0 dnsblog tlsproxy unix - - n - 0 tlsproxy submission inet n - n - - smtpd -o smtpd_tls_security_level=encrypt smtp unix - - n - - smtp # === End auto-generated section =========================================== # Modern SMTP clients communicate securely over port 25 using the STARTTLS command. # Some older clients, such as Outlook 2000 and its predecessors, do not properly # support this command and instead assume a preconfigured secure connection # on port 465. This was sometimes called "smtps", but such usage was never # approved by the IANA and therefore conflicts with another, legitimate assignment. # For more details about managing secure SMTP connections with postfix, please see: # http://www.postfix.org/TLS_README.html # To read more about configuring secure connections with Outlook 2000, please read: # http://support.microsoft.com/default.aspx?scid=kb;en-us;Q307772 # Apple does not support the use of port 465 for this purpose. # After determining that connecting clients do require this behavior, you may choose # to manually enable support for these older clients by uncommenting the following # four lines. #465 inet n - n - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - n - - smtp pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify sacl-cache unix - - n - 1 sacl-cache flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error retry unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants.

  Read the article

• Using nginx's proxy_redirect when the response location's domain varies

  - by Chalky

  I am making an web app using SoundCloud's API. Requesting an MP3 to stream involves two requests. I'll give an example. Firstly: http://api.soundcloud.com/tracks/59815100/stream This returns a 302 with a temporary link to the actual MP3 (which varies each time), for example: http://ec-media.soundcloud.com/xYZk0lr2TeQf.128.mp3?ff61182e3c2ecefa438cd02102d0e385713f0c1faf3b0339595667fd0907ea1074840971e6330e82d1d6e15dd660317b237a59b15dd687c7c4215ca64124f80381e8bb3cb5&AWSAccessKeyId=AKIAJ4IAZE5EOI7PA7VQ&Expires=1347621419&Signature=Usd%2BqsuO9wGyn5%2BrFjIQDSrZVRY%3D The issue I had was that I am attempting to load the MP3 via JavaScript's XMLHTTPRequest, and for security reasons the browser can't follow the 302, as ec-media.soundcloud.com does not set a header saying it is safe for the browser to access via XMLHTTPRequest. So instead of using the SoundCloud URL, I set up two locations in nginx, so the browser only interacts with the server my app is hosted on and no security errors come up: location /soundcloud/tracks/ { # rewrite URL to match api.soundcloud.com's URL structure rewrite \/soundcloud\/tracks\/(\d*) /tracks/$1/stream break; proxy_set_header Host api.soundcloud.com; proxy_pass http://api.soundcloud.com; # the 302 will redirect to /soundcloud/media instead of the original domain proxy_redirect http://ec-media.soundcloud.com /soundcloud/media; } location /soundcloud/media/ { rewrite \/soundcloud\/media\/(.*) /$1 break; proxy_set_header Host ec-media.soundcloud.com; proxy_pass http://ec-media.soundcloud.com; } So myserver/soundcloud/tracks/59815100 returns a 302 to /myserver/soundcloud/media/xYZk0lr2TeQf.128.mp3...etc, which then forwards the MP3 on. This works! However, I have hit a snag. Sometimes the 302 location is not ec-media.soundcloud.com, it's ak-media.soundcloud.com. There are possibly even more servers out there and presumably more could appear at any time. Is there any way I can handle an arbitrary 302 location without having to manually enter each possible variation? Or is it possible for nginx to handle the redirect and return the response of the second step? So myserver/soundcloud/tracks/59815100 follows the 302 behind the scenes and returns the MP3? The browser automatically follows the redirect, so I can't do anything with the initial response on the client side. I am new to nginx and in a bit over my head so apologies if I've missed something obvious, or it's beyond the scope of nginx. Thanks a lot for reading.

  Read the article

• SMTP authentication error using PHPMailer

  - by Javier

  I am using PHPMailer to send a basic form to an email address but I get the following error: SMTP Error: Could not authenticate. Message could not be sent. Mailer Error: SMTP Error: Could not authenticate. SMTP server error: VXNlcm5hbWU6 The weird thing is that if I try to send it again, IT WORKS! Every time I submit the form after that first error it works. But if I leave it for a few minutes and then try again I get the same error again. The username and password have to be right as sometimes it works fine. I even created the following (very basic) script just to test it and I got the same result <?php require("phpmailer/class.phpmailer.php"); $mail = new PHPMailer(); $mail->IsSMTP(); $mail->Host = "smtp.host.com"; $mail->SMTPAuth = true; $mail->Username = "[email protected]"; $mail->Password = "password"; $mail->From = "[email protected]"; $mail->FromName = "From Name"; $mail->AddAddress("[email protected]"); $mail->AddReplyTo("[email protected]"); $mail->IsHTML(true); $mail->Subject = "Here is the subject"; $mail->Body = "This is the HTML message body <b>in bold!</b>"; $mail->AltBody = "This is the body in plain text for non-HTML mail clients"; if(!$mail->Send()) { echo "Message could not be sent. <p>"; echo "Mailer Error: " . $mail->ErrorInfo; exit; } echo "Message has been sent"; ?> I don't think this is relevant, but I just changed my hosting to a Linux shared server. Any idea why this is happening? Thanks! ***UPDATED 02/06/2012 I've been doing some tests. The results: I tested the script in an IIS server and it worked fine. The error seems to happen only in the Linux server. Also, if I use the gmail mail server it works fine in both, IIS and Linux. Could it be a problem with the configuration of my Linux server??

  Read the article

• apache mod_cache in v2.2 - enable cache based on url

  - by Janning

  We are using apache2.2 as a front-end server with application servers as reverse proxies behind apache. We are using mod_cache for some images and enabled it like this: <IfModule mod_disk_cache.c> CacheEnable disk / CacheRoot /var/cache/apache2/mod_disk_cache CacheIgnoreCacheControl On CacheMaxFileSize 2500000 CacheIgnoreURLSessionIdentifiers jsessionid CacheIgnoreHeaders Set-Cookie </IfModule> The image urls vary completely and have no common start pattern, but they all end in ".png". Thats why we used the root in CacheEnable / If not served from the cache, the request is forwarded to an application server via reverse proxy. So far so good, cache is working fine. But I really only need to cache all image request ending in ".png". My above configuration still works as my application server send an appropriate Cache-Control: no-cache header on the way back to apache. So most pages send a no-cache header back and they get not cached at all. My ".png" responses doesn't send a Cache-Control header so apache is only going to cache all urls with ".png". Fine. But when a new request enters apache, apache does not know that only .png requests should be considered, so every request is checking a file on disk (recorded with strace -e trace=file -p pid): [pid 19063] open("/var/cache/apache2/mod_disk_cache/zK/q8/Kd/g6OIv@woJRC_ba_A.header", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) I don't want to have apache going to disk every request, as the majority of requests are not cached at all. And we have up to 10.000 request/s at peak time. Sometimes our read IO wait spikes. It is not getting really slow, but we try to tweak it for better performance. In apache 2.4 you can say: <LocationMatch .png$> CacheEnable disk </LocationMatch> This is not possible in 2.2 and as I see no backports for debian I am not going to upgrade. So I tried to tweak apache2.2 to follow my rules: <IfModule mod_disk_cache.c> SetEnvIf Request_URI "\.png$" image RequestHeader unset Cache-Control RequestHeader append Cache-Control no-cache env=!image CacheEnable disk / CacheRoot /var/cache/apache2/mod_disk_cache #CacheIgnoreCacheControl on CacheMaxFileSize 2500000 CacheIgnoreURLSessionIdentifiers jsessionid CacheIgnoreHeaders Set-Cookie </IfModule> The idea is to let apache decide to serve request from cache based on Cache-control header (CacheIgnoreCacheControl default to off). And before simply set a RequestHeader based on the request. If it is not an image request, set a Cache-control header, so it should bypass the cache at all. This does not work, I guess because of late processing of RequestHeader directive, see https://httpd.apache.org/docs/2.2/mod/mod_headers.html#early I can't add early processing as "early" keyword can't be used together with a conditional "env=!image" I can't change the url requesting the images and I know there are of course other solutions. But I am only interested in configuring apache2.2 to reach my goal. Does anybody has an idea how to achieve my goal?

  Read the article

• What do you use to store all of your personal data?

  - by codeflunky

  I have been on a quest for years to find the perfect tool to store all "my stuff". You know... personal information, code snippets, software keys, people's birthdays, whatever. There are lots of tools out there for this sort of thing, but I've never found any of them quite what I need. Ideally, I would just be able to type some notes, tag them (I don't like the idea of folder organization... too cumbersome) and then easily search and retrieve what I need later. It seems so simple, but for some reason I just can't find it. I currently use Backpack (sometimes), which is OK, but I hate the fact that you always have to create "pages" to store things. I don't want to have to do that. I want to just type some notes, tag it and save. That's it. And Backpack didn't even have search for a long time. What I do like about Backpack is that it's fast and it's web based. I've tried some desktop apps, which probably came closer to the functionality I want, but I just hate being tied to a single machine. I want to be able to get to my stuff anywhere, so the web based thing is a definite requirement. Anyway, I'm thinking about writing my own thing for this if I can't find anything, but before I make the attempt, I was wondering if anyone has any suggestions? I've used Backpack, Zoho Planner, Stikkit and Google Notes so far, and they are not quite to my liking. Anyone? (Sorry if this is off-topic, but I figured you guys might be legitimately into this kind of thing... you know, storing code snippets and such.) UPDATE: I've been using Evernote for a few days, and it is exactly what I've been looking for. It is totally tag based and allows both online and offline usage. The desktop app sits in your system tray and allows you to add whatever you want on the fly either as text notes or clippings from the browser. It also syncs it to the web (if you want) where you can get to it from anywhere using their web client. They even have a mobile client which I haven't used, but I will try it soon. Thanks again 18hrs. I wish I could give you 10 upvotes.

  Read the article

• Snmpd update interface counters slowly or something like this

  - by Korjavin Ivan

  I update one my freebsd box to 9-stable (totally new installation) and install net-snmp for monitoring. uname -r 9.1-PRERELEASE pkg_info net-snmp-5.7.1_7 Information for net-snmp-5.7.1_7: Comment: An extendable SNMP implementation .... cat /var/db/ports/net-snmp/options # This file is auto-generated by 'make config'. # Options for net-snmp-5.7.1_7 _OPTIONS_READ=net-snmp-5.7.1_7 _FILE_COMPLETE_OPTIONS_LIST= IPV6 MFD_REWRITES PERL PERL_EMBEDDED PYTHON DUMMY TKMIB DMALLOC MYSQL AX_SOCKONLY UNPRIVILEGED OPTIONS_FILE_UNSET+=IPV6 OPTIONS_FILE_UNSET+=MFD_REWRITES OPTIONS_FILE_SET+=PERL OPTIONS_FILE_SET+=PERL_EMBEDDED OPTIONS_FILE_UNSET+=PYTHON OPTIONS_FILE_SET+=DUMMY OPTIONS_FILE_UNSET+=TKMIB OPTIONS_FILE_SET+=DMALLOC OPTIONS_FILE_UNSET+=MYSQL OPTIONS_FILE_UNSET+=AX_SOCKONLY OPTIONS_FILE_UNSET+=UNPRIVILEGED I have about 500 vlan on this machine, and collect info about interface through snmpd to 2 different software, zabbix and cacti. And both of them plot the graphs with blank fields. I tryed change polling time in zabbix, from 15, sec to 30,60,90,120,10. And anyway i have blank fields. snmpd.conf is empty - only a access controls. This configuration worked fine on freebsd 8. Where is my fault? How fix this graphs? UPD: Changing pooling time, switch off one of agent, doesnt help. I look at zabbix log (recieved data from snmpd) and see that: sorry for russian locale, just look at numbers: and thats is not true, as my "iftop" show speed was about 90Mbits, but snmpd return 2Mbits. I understand that snmpd doesnt return speed, it return just a counter. But how its possible? why 2Mbit/s ? I tryed recompile snmpd with 64-bit counters, and without it. In both variants this blank fields present. So i think its my OS (freebsd) doesnt update interface counters well. I still collect tcpdump for found this request/response. But have problem with that, to much trash. UPD2: I decrypt tcpdump-ed file, and public this as google doc at gdocfile Timediff looks strange.. Like zabbix sometimes "forget" do request, and then do twice at row, ehh UPD3: I parse log from command "while true; do netstat -bin -I vlan4008 /var/log/netstat; sleep 300; done" and load as google docs, and add formula for speed : link Looks like all counters in OS are good. Now i think problem in : 1. zabbix get request twice at row (and what about cacti) 2. snmpd use counter32

  Read the article

• Weird random application hang problem

  - by haridsv

  I am trying to understand an application hang problem that started up lately on my windows xp system. The system runs fine for days (sometimes) without ever shutting down or putting it to sleep, but the problem first shows up as one of the apps hanging. The application's UI stops responding or one or more background threads hang, so even though the GUI is responding, it is not doing anything (e.g., in VirtualDub's case, the UI responds fine, but the job doesn't progress and I won't even be able to abort it). The weirdness part comes from the fact that if I try to kill such an app, the program that is used to kill it goes into the same mode (i.e, that hangs instead of the original). E.g., if I use Process Explorer to kill it, the original program exits, but procexp now hangs. If I use another instance of procexp to kill the one that is hanging, this repeats, so there is always at least one program hanging in that state. This is not specific to procexp, I tried the native task manager and even the "End Process" dialog from windows explorer that shows up when you try to close a non-responsive GUI (in this case, the explorer itself hangs). The only program that didn't hang after the kill, is the command line taskkill. However, in this case, explorer hangs instead of taskkill. Also, once this problem starts manifesting, it soon ends up freezing the whole system to the extent that even a clean shutdown is not possible, so I have learned to reboot as soon as I notice this problem, however this is very inconvenient, as I often have encoding batch jobs going on which can't continue the job after the restart. The longer I leave the system running after seeing this problem, the more applications get into this state. I have tried to do a repair install but that didn't make any difference. I also uninstalled some of the newer installs, but again no difference. I tried to search online, but got inundating results for generic hang and crash related problems. Though I couldn't notice any pattern, it seems as though the problem is more frequent if I have some video encoding going on at that time. I had the system running for days when I only do browsing and internet audio/video chat before I decide to start encoding something and the problem starts to show up. I am not too sure if it is the encoding program that first hangs, though I almost always noticed that too hanging (like the VirtualDub stopping to make progress). I also had to reboot 3 times on one day when I was heavily experimenting with encoding. I would appreciate any help in narrowing down this problem and save me the trouble of reinstalling. I don't especially want to loose my gotd installs.

  Read the article

• Intermittent internet access on a flat network - Router is connected

  - by Naveed

  I’m looking for some help with network settings. I’ve just started a new job (non-IT!) and we have problems with our office network. I’m the most IT literate in the organisation (15 permanent employees) and so have been dealing with IT issues. Our main bit of software is web-based so we need constant web access but it sometimes goes down for between 20 minutes and 3 hours despite everything seemingly working fine. It’s a flat network with wireless APs, BT Business Broadband 8Mbit connection and that’s about it. We have no servers and no standard settings and staff are encouraged to bring in their own laptops and connect! The network basically exists to provide internet access and that’s it. We also have students accessing the wireless (and I know there’s a whole list of access and content issues etc but right now we just need internet access stabilised). This is what we have: Building 1 Cisco SLM-224P 24-port PoE 10/100 switch with 2 gigabit ports 3 x ZyXEL NWA-3160 wireless APs Samsung OfficeServ 7100 phone server which borrows the building’s wiring Building 2 Netgear GS605-UK 5-port 10/100/1000 switch 1 x ZyXEL NWA-3160 wireless AP 1 x BT Business Hub – 2wire BT2700hgv – is the DHCP server We have 2 link cables between the buildings. One connects the two switches on a gigabit port. The second (oddly) connects the switch in building 2 to the OfficeServ server in building 1. When the internet goes down I can still access the router through a wireless connection. I can also ping websites and get a response. Firefox just says “Cannot connect” etc. The system then heals itself when it feels like it. (Sorry if this is asking too much but) These are my immediate questions… Why would browser-based internet go down? I don’t know enough about protocols etc but I can try to standardise settings. The WAPs have a DNS server setting and I don’t know whether it should be “None” or “From DHCP”. What should be the DHCP server? The router or the Cisco switch? Or something else?! Would there be any problem in connecting the second link from switch to switch? Is that good practice? Is it worth swapping the Netgear GS605 with either a Cisco SG200-08 or Netgear GS108T-200? Is it worth upgrading the router to, for instance, a Cisco RV042G Dual Gigabit router which would also act as a switch? Or is it better to have a separate router and switch in Building 2?

  Read the article

• Apache/Jboss Issue - is this connection timeout?

  - by user115391

  We have an application. The architecture is as below 1 load balancer (apache), which redirects to 2 app servers (jboss). The site is working fine and I am able to access it fine. But sometimes, randomly the homepage takes a while (like 30-40 secs) to load. I tried checking the logs but could not figure out why. I used the httptraffic analyzer, fiddler to see the traffic, but it just says the request/response took 30 secs or so. I checked the apache access logs, mod_jk.log. My configurations are below mod-jk.conf LoadModule jk_module modules/mod_jk.so JkWorkersFile conf/workers.properties JkLogFile logs/mod_jk.log #JkLogLevel info #JkLogLevel debug JkLogLevel error # Select the log format JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" JkOptions +ForwardKeySize +ForwardURICompatUnparsed -ForwardDirectories JkRequestLogFormat "%w %V %T %P %{tid}P %D" JkMount /__application__/* loadbalancer JkUnMount /__application__/images/* loadbalancer <VirtualHost *:8080 > JkMountFile conf/uriworkermap.properties </VirtualHost> JkShmFile run/jk.shm <Location /jkstatus> JkMount status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> ----------------------------- uriworkermap.properties Simple worker configuration file # Mount the Servlet context to the ajp13 worker /=loadbalancer /*=loadbalancer ----------------------------- workers.properties worker.list=loadbalancer,status worker.template.port=8009 worker.template.type=ajp13 worker.template.lbfactor=1 worker.template.prepost_timeout=10000 worker.template.connect_timeout=10000 worker.template.ping_mode=A worker.worker1.reference=worker.template worker.worker1.host=hostname1 worker.worker2.reference=worker.template worker.worker2.host=hostname2 worker.loadbalancer.type=lb worker.loadbalancer.balance_workers=worker1,worker2 worker.status.type=status ----------------------------- my jboss server.xml - $JBOSS_HOME/server/default/deploy/jbossweb.sar/server.xml --------------------------------- The logs from access log is below The issue where it took time - look at the seconds column [23/Mar/2012:12:10:38 -0400] "GET / HTTP/1.1" 200 138 x.x.x.x - - [23/Mar/2012:12:10:49 -0400] "GET /index.jsp HTTP/1.1" 302 - x.x.x.x - - [23/Mar/2012:12:11:10 -0400] "GET /home.jsp HTTP/1.1" 200 936 x.x.x.x - - [23/Mar/2012:12:11:31 -0400] "POST /login/ HTTP/1.1" 200 8895 x.x.x.x - - [23/Mar/2012:12:11:52 -0400] "GET /login/includes/login-style.css HTTP/1.1" 304 - The one after the issue x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET / HTTP/1.1" 200 138 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /index.jsp HTTP/1.1" 302 - x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /home.jsp HTTP/1.1" 200 936 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "POST /login/ HTTP/1.1" 200 8895 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /login/includes/login-style.css HTTP/1.1" 304 - Would it be a cache or timeout issue? Any help is appreciated. Thanks.

  Read the article

• Abnormal hangs and restarts Ubuntu 8.04

  - by jai-ho

  Hi, I am using Ubuntu 8.04 LTS and seeing the following behaviors: The system hangs after a while and becomes completely unresponsive. The system sometimes restarts itself ! Can you please help me identify what is the problem? Also please mention where should I look for the possible cause of this error. Thanks. EDIT: Got the following from the dmesg output (the system got hung and had to restart) [ 15.452015] Driver 'sr' needs updating - please use bus_type methods [ 15.456882] Driver 'sd' needs updating - please use bus_type methods [ 15.457987] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 15.457993] Uniform CD-ROM driver Revision: 3.20 [ 15.458058] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 15.463028] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463051] sd 1:0:0:0: [sda] Write Protect is off [ 15.463055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463083] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463151] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463167] sd 1:0:0:0: [sda] Write Protect is off [ 15.463171] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463197] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463202] sda:<5sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 15.464634] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 15.470120] sda1 sda2 < sda5 [ 15.495536] sd 1:0:0:0: [sda] Attached SCSI disk [ 15.759549] Attempting manual resume [ 15.759554] swsusp: Resume From Partition 8:5 [ 15.759556] PM: Checking swsusp image. [ 15.759742] PM: Resume from disk failed. [ 15.779964] EXT3-fs: INFO: recovery required on readonly filesystem. [ 15.779970] EXT3-fs: write access will be enabled during recovery. [ 19.904204] kjournald starting. Commit interval 5 seconds [ 19.904235] EXT3-fs: sda1: orphan cleanup on readonly fs [ 19.904245] ext3_orphan_cleanup: deleting unreferenced inode 303260 [ 19.904304] ext3_orphan_cleanup: deleting unreferenced inode 303329 [ 19.932763] ext3_orphan_cleanup: deleting unreferenced inode 3801871 [ 19.932785] ext3_orphan_cleanup: deleting unreferenced inode 3801874 [ 19.932798] ext3_orphan_cleanup: deleting unreferenced inode 3801910 [ 19.951253] ext3_orphan_cleanup: deleting unreferenced inode 3801912 [ 19.951266] ext3_orphan_cleanup: deleting unreferenced inode 3801914 [ 19.951278] ext3_orphan_cleanup: deleting unreferenced inode 3959212 [ 19.951299] ext3_orphan_cleanup: deleting unreferenced inode 3959213 [ 19.960335] ext3_orphan_cleanup: deleting unreferenced inode 3959215 [ 19.963531] ext3_orphan_cleanup: deleting unreferenced inode 3801875 [ 19.963545] ext3_orphan_cleanup: deleting unreferenced inode 3663727 [ 19.963565] ext3_orphan_cleanup: deleting unreferenced inode 3663708 [ 19.963577] ext3_orphan_cleanup: deleting unreferenced inode 4072122 [ 19.963597] ext3_orphan_cleanup: deleting unreferenced inode 4072157 [ 19.968616] ext3_orphan_cleanup: deleting unreferenced inode 4072159 [ 19.970252] ext3_orphan_cleanup: deleting unreferenced inode 4072160 [ 19.970264] ext3_orphan_cleanup: deleting unreferenced inode 4072161 [ 19.992889] ext3_orphan_cleanup: deleting unreferenced inode 4072264 [ 19.992903] ext3_orphan_cleanup: deleting unreferenced inode 4072267 [ 19.999585] ext3_orphan_cleanup: deleting unreferenced inode 4072268 [ 20.008329] ext3_orphan_cleanup: deleting unreferenced inode 4072270 [ 20.008343] ext3_orphan_cleanup: deleting unreferenced inode 4072123 [ 20.008360] ext3_orphan_cleanup: deleting unreferenced inode 4072452 [ 20.008374] ext3_orphan_cleanup: deleting unreferenced inode 4072453 [ 20.008385] ext3_orphan_cleanup: deleting unreferenced inode 4072124 [ 20.008398] ext3_orphan_cleanup: deleting unreferenced inode 311574 [ 20.008413] ext3_orphan_cleanup: deleting unreferenced inode 967890 [ 20.008420] EXT3-fs: sda1: 28 orphan inodes deleted [ 20.008423] EXT3-fs: recovery complete. [ 20.082622] EXT3-fs: mounted filesystem with ordered data mode. [ 29.025379] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 29.187133] Linux agpgart interface v0.102 [ 29.225338] iTCO_vendor_support: vendor-support=0 [ 29.259662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

  Read the article

• Ubuntu and Windows 8 shared partition gets corrupted

  - by Bruno-P

  I have a dual boot (Ubuntu 12.04 and Windows 8) system. Both systems have access to an NTFS "DATA" partition which contains all my images, documents, music and some application data like Chrome and Thunderbird Profiles which used by both OS. Everything was working fine in my Dual boot Ubuntu/Windows 7, but after updating to Windows 8 I am having a lot of troubles. First, sometimes, I add some files from Ubuntu into my DATA partition but they don't show up in Windows. Sometimes, I can't even use the DATA partition from Windows. When I try to save a file it gives an error "The directory or file is corrupted or unreadable". I need to run checkdisk to fix it but after some time, same error appears. Before upgrading to Windows 8 I also installed a new hard drive and copied the old data using clonezilla (full disk clone). Here is the log of my last chkdisk: Chkdsk was executed in read/write mode. Checking file system on D: Volume dismounted. All opened handles to this volume are now invalid. Volume label is DATA. CHKDSK is verifying files (stage 1 of 3)... Deleted corrupt attribute list entry with type code 128 in file 67963. Unable to find child frs 0x12a3f with sequence number 0x15. The attribute of type 0x80 and instance tag 0x2 in file 0x1097b has allocated length of 0x560000 instead of 0x427000. Deleted corrupt attribute list entry with type code 128 in file 67963. Unable to locate attribute with instance tag 0x2 and segment reference 0x1e00000001097b. The expected attribute type is 0x80. Deleting corrupt attribute record (128, "") from file record segment 67963. Attribute record of type 0x80 and instance tag 0x3 is cross linked starting at 0x2431b2 for possibly 0x20 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x3 in file 0x1791e is already in use. Deleting corrupt attribute record (128, "") from file record segment 96542. Attribute record of type 0x80 and instance tag 0x4 is cross linked starting at 0x6bc7 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x4 in file 0x17e83 is already in use. Deleting corrupt attribute record (128, "") from file record segment 97923. Attribute record of type 0x80 and instance tag 0x4 is cross linked starting at 0x1f7cec for possibly 0x5 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x4 in file 0x17eaf is already in use. Deleting corrupt attribute record (128, "") from file record segment 97967. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x441bd7f for possibly 0x9 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x32085 is already in use. Deleting corrupt attribute record (128, "") from file record segment 204933. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4457850 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x320be is already in use. Deleting corrupt attribute record (128, "") from file record segment 204990. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4859249 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3726b is already in use. Deleting corrupt attribute record (128, "") from file record segment 225899. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x485d309 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3726c is already in use. Deleting corrupt attribute record (128, "") from file record segment 225900. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x48a47de for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37286 is already in use. Deleting corrupt attribute record (128, "") from file record segment 225926. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x48ac80b for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37287 is already in use. Deleting corrupt attribute record (128, "") from file record segment 225927. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x48ae7ef for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37288 is already in use. Deleting corrupt attribute record (128, "") from file record segment 225928. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x48af7f8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3728a is already in use. Deleting corrupt attribute record (128, "") from file record segment 225930. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x48c39b6 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37292 is already in use. Deleting corrupt attribute record (128, "") from file record segment 225938. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x495d37a for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x372d7 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226007. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4d0bd38 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x372dc is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226012. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4c2d9bc for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x372ed is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226029. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4a4c1c3 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37354 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226132. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4a8e639 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37376 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226166. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4a8f6eb for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37379 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226169. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4ae1aa8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37391 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226193. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4b00d45 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x37396 is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226198. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4b02d50 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3739c is already in use. Deleting corrupt attribute record (128, "") from file record segment 226204. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4b3407a for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x373a8 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226216. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4bd8a1b for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x373db is already in use. Deleting corrupt attribute record (128, "") from file record segment 226267. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4bd9a28 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x373dd is already in use. Deleting corrupt attribute record (128, "") from file record segment 226269. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4c2fb24 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x373f3 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226291. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cb67e9 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37424 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226340. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cba829 for possibly 0x2 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37425 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226341. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cbe868 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37427 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226343. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cbf878 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37428 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226344. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cc58d8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3742a is already in use. Deleting corrupt attribute record (128, "") from file record segment 226346. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4ccc943 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3742b is already in use. Deleting corrupt attribute record (128, "") from file record segment 226347. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cd199b for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3742d is already in use. Deleting corrupt attribute record (128, "") from file record segment 226349. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cd29a8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3742f is already in use. Deleting corrupt attribute record (128, "") from file record segment 226351. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cd39b8 for possibly 0x2 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37430 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226352. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cd49c8 for possibly 0x2 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37432 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226354. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cd9a16 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37435 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226357. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cdca46 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37436 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226358. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4ce0a78 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37437 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226359. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4ce6ad9 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3743a is already in use. Deleting corrupt attribute record (128, "") from file record segment 226362. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cebb28 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3743b is already in use. Deleting corrupt attribute record (128, "") from file record segment 226363. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4ceeb67 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3743d is already in use. Deleting corrupt attribute record (128, "") from file record segment 226365. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cf4bc6 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x3743e is already in use. Deleting corrupt attribute record (128, "") from file record segment 226366. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cfbc3a for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37440 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226368. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4cfcc48 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37442 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226370. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4d02ca9 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37443 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226371. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4d06ce8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37444 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226372. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4d9a608 for possibly 0x2 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x37449 is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226377. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4d844ab for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x3744b is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226379. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4d6c32b for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x3744c is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226380. Attribute record of type 0xa0 and instance tag 0x5 is cross linked starting at 0x4d2af25 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0xa0 and instance tag 0x5 in file 0x3744e is already in use. Deleting corrupt attribute record (160, $I30) from file record segment 226382. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4d0fd78 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x80 and instance tag 0x2 in file 0x37451 is already in use. Deleting corrupt attribute record (128, "") from file record segment 226385. Attribute record of type 0x80 and instance tag 0x2 is cross linked starting at 0x4d16ef8 for possibly 0x1 clusters. Some clusters occupied by attribute of type 0x8 Can anyone help? Thank you

  Read the article

• Problems sending SMTP email to large systems such as Gmail

  - by Martel

  I maintain a mail server. Recently messages sent to valid recipients on gmail, yahoo, and now roadrunner email addresses are bounced with similar messages: Here's one from gmail: The message, sent by [email protected], can not be delivered to following recipient(s): *recipient*@gmail.com There was a fatal SMTP error. Fatal DNS error: exchanger alt4.gmail-smtp-in.l.google.com. does not exist Delivery History Follows: [DLVR 000020 19-12-12 14:21:21] Delivering item 5573 [DLVR 000020 19-12-12 14:21:21] Resolving MX records for domain gmail.com [DLVR 000020 19-12-12 14:21:21] Retrieved 5 MX records for domain gmail.com [DLVR 000020 19-12-12 14:21:21] Delivering mail to 1 recipient(s) at domain gmail.com using exchanger gmail-smtp-in.l.google.com. [DLVR 000020 19-12-12 14:21:33] Host gmail-smtp-in.l.google.com. does not appear to exist... [DLVR 000020 19-12-12 14:21:33] Will try next exchanger [DLVR 000020 19-12-12 14:21:33] Delivering mail to 1 recipient(s) at domain gmail.com using exchanger alt1.gmail-smtp-in.l.google.com. [DLVR 000020 19-12-12 14:21:45] Host alt1.gmail-smtp-in.l.google.com. does not appear to exist... [DLVR 000020 19-12-12 14:21:45] Will try next exchanger [DLVR 000020 19-12-12 14:21:45] Delivering mail to 1 recipient(s) at domain gmail.com using exchanger alt2.gmail-smtp-in.l.google.com. [DLVR 000020 19-12-12 14:21:57] Host alt2.gmail-smtp-in.l.google.com. does not appear to exist... [DLVR 000020 19-12-12 14:21:57] Will try next exchanger [DLVR 000020 19-12-12 14:21:57] Delivering mail to 1 recipient(s) at domain gmail.com using exchanger alt3.gmail-smtp-in.l.google.com. [DLVR 000020 19-12-12 14:22:09] Host alt3.gmail-smtp-in.l.google.com. does not appear to exist... [DLVR 000020 19-12-12 14:22:09] Will try next exchanger [DLVR 000020 19-12-12 14:22:09] Delivering mail to 1 recipient(s) at domain gmail.com using exchanger alt4.gmail-smtp-in.l.google.com. [DLVR 000020 19-12-12 14:22:21] Host alt4.gmail-smtp-in.l.google.com. does not appear to exist... [DLVR 000020 19-12-12 14:22:21] Fatal error - host alt4.gmail-smtp-in.l.google.com. does not exist. Will bounce... [DLVR 000020 19-12-12 14:22:21] Bouncing to sender using bounce address [email protected]... Sometimes these emails get through, other times not. I'm at a loss to explain it.

  Read the article

• DVD Drive Failing on Windows 7

  - by Seth Spearman

  Hello, I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

  Read the article

• Why is the installation of certain programs always such a pain in Linux [closed]

  - by Saif Bechan

  I am new to Linux and I am trying to set up a server. For this I sometimes to need to install special software, but the installation of this is always such a pain. For example I wanted to try the htscanner to see if it did the job for me. When i got to the page there is NO INSTALLATION guide. I had to search for the right one on google. Even on google its a pain to find the right method. Just try it - google search.After a long search and tried different things I finally found out that I had te install some more software before it will work. The website says that the version I used did not had any dependencies. Thats a lie. Release0.8.1: No dependencies registered. You do need certain things for it to work. After managing to set it up it still didn't work I can't figure out why because there is no official guide on the website. So I wanted to just uninstall it and find a better solution. Uninstalling. Uninstalling something in Linux is a real mystery how this actually works. The best answer I got is to manually look for the files and delete them. Whats up with that! There is never something said about uninstalling on the websites. Even on the website of CentOS itself it tels you how to install something like rpmforge packages (it's a miracle they tell you and not have to google it) but there is no mention of what to do when you want to uninstall. Why not? The forums you get on when trying to solve your problem are most of the time in plain text, and you have to scroll trough huge error logs before you see somethings that vaguely resembles your question if you are lucky. The Question My question is if there are any recommended websites / forums that explain the basic concepts of installing and uninstalling software on Linux. And explain other useful operations. And not Wikipedia or the first hits of Google, I have been there already. I am looking for some easy to read trough guides on these operations on Linux. I have been on a lot of websites that explain some Linux operation, but I bet its easier to get a degree in rocket science than to read trough the website and understand what they try to say.

  Read the article

• DVD Drive Failing on Windows 7

  - by Seth Spearman

  I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

  Read the article

• Windows XP machine not seeing external FAT32 partitions correctly

  - by Rob_before_edits

  About 8 months ago my Windows XP machine stopped being able to see FAT32 external drives when I plug them in... mostly. I will explain... It happens with all my FAT32 drives, whether they be unpowered external hard drives, powered external hard drives, SDHC cards plugged directly into the machine's card reader, or SDHC cards plugged in via a separate USB card reader. All of these drives/cards used to work fine on this machine. They all stopped working at about the same time. NTFS volumes are not affected. If I plug in NTFS external drives they are recognized right away. I even have one external drive with two partitions on it, one is NTFS which is recognized, the other is FAT32, which is not recognized. If I attach a FAT32 drive, then reboot, then the drive almost always becomes visible to the machine after the reboot. Sometimes I can plug in a FAT32 drive and it works right away. Not often though. I'd say I get lucky more often with SDHC cards than hard drives. I'm developing a theory that I only get lucky with hard drives if I'm running Acronis Disk Director when I plug them in, though that usually doesn't work either - I need more data here, this may be a red herring. Getting lucky with a hard drive is really rare, usually I have to reboot. When a FAT32 is recognized, either because I got lucky or because I rebooted, I can almost never safely disconnect it. It tells me "The device 'Generic volume' cannot be stopped right now. Try stopping the device again later". I can't seem to get around this. IIRC, I've tried closing every open window, and still no luck. Since I care about my data usually the only way to disconnect a FAT32 drive is to shut down the machine. As you can imagine, two reboots just to read a drive is getting pretty old... When the machine fails to see a FAT32 drive it usually comes up with the appropriate drive letter and the words "Local Disk" in Windows Explorer instead of the correct partition name. If I click on it I get "J:\ is not accessible. The parameter is incorrect." Before this problem arose I always clicked the "safely remove" button for everything, including SDHC cards where I think it's not necessary. I've known for a long time that this is the correct procedure for hard drives, so I don't think failing to do this was the cause of this problem (before someone asks :) Any answers or suggestions most welcome.

  Read the article

• iCloud stuff stops working while connected to OpenVPN [closed]

  - by Taco Bob

  I have a fairly simple OpenVPN setup on an OpenVZ VPS with Ubuntu 11.10. Client is the Viscosity client on Mac OS X 10.8.2, and after some testing, we can rule out the client as being part of the problem. Everything has been working fine except for Apple's iCloud stuff. Web surfing, email, FTP, NNTP, and Skype are all working as expected. It's ONLY the iCloud services that cease to function. If I connect to the VPN, iCloud stuff stops working. I no longer get anything in Messages, Calendar items don't get updated, and Notifications stop working. If I disconnect, the iCloud stuff all starts working. Connect again, iCloud stops working. Here's the server.conf: status openvpn-status.log log /var/log/openvpn.log verb 4 port 1194 proto udp dev tun ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh1024.pem server 10.9.8.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1" push “dhcp-option DNS 10.9.8.1? keepalive 10 120 duplicate-cn cipher BF-CBC comp-lzo user nobody group nogroup persist-key persist-tun tun-mtu 1500 mssfix 1400 I'm using iptables in a script, and it's also fairly simplistic. iptables -F iptables -t nat -F iptables -t mangle -F iptables -A FORWARD -i tun0 -o venet0 -j ACCEPT iptables -A FORWARD -i venet0 -o tun0 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -p udp --dport 1194 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source <server's public ip> echo 1 > /proc/sys/net/ipv4/ip_forward I tried forwarding ports as well, with no success. iptables -A FORWARD -p tcp -d 10.9.8.0/24 --dport 5222:5230 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 5222:5230 -j DNAT --to-destination 10.9.8.6 I am also sometimes behind a double-NAT situation that I have no control over. Client -> work VPN -> my OpenVPN box -> Internet. Client -> Airport Express -> ISP (which is doing NAT) -> my OpenVPN box -> Internet. Those two situations are just the fact of life where I am, and I cannot change them. I do have full control over my client and the OpenVPN server. I am completely out of ideas. I have posted a similar query at the OpenVPN forums, but it hasn't posted yet and seems to be in their moderation queue still. Tried on freenode irc channels, but nobody is awake, so here I am. I have Googled extensively for this, and can find nothing that is related. Help me get iCloud stuff working again!

  Read the article

• Why is my Linux box dropping network connection? [closed]

  - by Robo

  I have a Debian server in the form of a Raspberry Pi running Raspian. It has a USB Wi-Fi connection. Sometimes it would not respond when I SSH to it, and would require a reboot. I found something in syslog that may indicate what the problem is, can someone help with what this means? Dec 16 15:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 16:17:01 raspberrypi /USR/SBIN/CRON[2109]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 16:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 17:17:01 raspberrypi /USR/SBIN/CRON[2127]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 17:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 18:17:01 raspberrypi /USR/SBIN/CRON[2142]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 18:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 19:17:01 raspberrypi /USR/SBIN/CRON[2161]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 19:31:29 raspberrypi kernel: [16615.391509] ieee80211 phy0: wlan0: No probe response from AP 00:21:29:6c:5c:3d after 500ms, disconnecting. Dec 16 19:31:29 raspberrypi wpa_supplicant[1501]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:21:29:6c:5c:3d reason=4 Dec 16 19:31:29 raspberrypi kernel: [16615.416189] cfg80211: Calling CRDA to update world regulatory domain Dec 16 19:31:30 raspberrypi ifplugd(wlan0)[1444]: Link beat lost. Dec 16 19:31:40 raspberrypi ifplugd(wlan0)[1444]: Executing '/etc/ifplugd/ifplugd.action wlan0 down'. Dec 16 19:31:40 raspberrypi wpa_supplicant[1501]: wlan0: CTRL-EVENT-TERMINATING - signal 15 received Dec 16 19:31:40 raspberrypi ifplugd(wlan0)[1444]: Program executed successfully. Dec 16 19:31:42 raspberrypi ntpd[1928]: Deleting interface #2 wlan0, 192.168.1.10#123, interface stats: received=321, sent=327, dropped=0, active_time=16596 secs Dec 16 19:31:42 raspberrypi ntpd[1928]: 202.6.116.123 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 203.99.128.34 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 203.118.148.40 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 202.89.49.65 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: peers refreshed

  Read the article

• Configuring gmail for use on mailing lists

  - by reemrevnivek

  This is really two questions in one. First, are nettiquette guidelines still accurate in their restrictions on ASCII vs. HTML, posting style, and line length? (Here's a recent metafilter discussion of the topic.) Second, If they are not, should these guidelines be respected? If they are (or if they should still be respected), how can modern mail programs be configured to work properly with them? Most mailing list etiquette statements appear to have been written by sysadmins who loved their command lines, and refuse to change anything. Many still reference rfc1855, written in 1995. Just reading that paginated TXT should give you an idea of the climate at the time. Here's a short, fairly random list of mailing list etiquette statements with some extracted formatting guidelines: Mozilla - HTML discouraged, interleaved posting. FreeBSD - No HTML, don't top post, line length at 75 characters. Fedora - No HTML, bottom-post. You get the idea. You've all seen etiquette statements before. So, assuming that the rules should be obeyed (Usually a good idea), what can be done to allow me to still use a modern mail program, and exchange mail with friends who use the same programs? We like to format our mail. Bold headings, code snippets (sometimes syntax highlighted, if the copy-paste pulls RTF text as from XCOde and Eclipse), free line breaks determined by your browser width, and the (very) occasional image make the message easier to read. Threaded conversations are a wonderful thing. Broadband connections are, I'm sure, the rule for most of the users of SU and of developer mailing lists, disk space is cheap, and so the overhead of HTML is laughable. However, I don't want to post a question to a mailing list and have the guru who can answer my question automatically delete it, or come off as uncaring. Until I hear otherwise, I'll continue to respect the rules as best I can. For a common example of the problem, Gmail, by default, sends HTML formatted messages with bottom-posted quotes (which are folded in, just read the last message immediately above), and uses the frame width to wrap lines, rather than a character count. ASCII can be selected, and quotes can be moved and reversed, but line wraps of quotes don't work, line breaks are tedious to add (and more tedious to read, if they're super small in comparison to the width of the frame). Is there a forwarding, free mail program which can help with this exercise? Should an "RFC1855 mode" lab be written? Or do I have to go to the command line for my mailing lists, and gmail for my other mail?

  Read the article

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubu

  - by user37968

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• How might I stop BACKSCATTER using Qmail?

  - by alecb

  New to ServerFault , please pardon if my details are too much Linux box acting as Virtual Host for domain hosting. Runs CentOs. Runs Parallels Plesk 9.x Regardless of the following, the SPAM keeps flowing in at 1-3 / second. An explanation of the problem... "xinetd service listens for SMTP connections and forwards to qmail-smtpd. The qmail service only process the queue, but does not control messages coming into the queue...that's why stopping it has no effect. If you stop xinetd AND qmail, then kill any open qmail-smtpd processes, all mail flow comes to a stop SOMETIMES Problem is, qmail-smtpd is not smart enough to check for valid mailboxes on the localhost before accepting the mail. So, it accepts bad mail with a forged replyto address which gets processed in the queue by qmail. Qmail cannot deliver locally and bounces to the forged replyto address." We believe the fix is to patch the qmail-smtpd process to give it the intelligence to check for the existence of local mailboxes BEFORE accepting the message. The problem is when we try to compile the chkuser patch we run into failures due to Plesk Control Panel." Is anyone aware of something we could do differently or better?" Other things that have NOT worked thus far: -Turning off any and all mail processes (to check as an indicator that an individual account has been compromised. This has been verified as NOT the case.) -Turning off mail AND http server processes (in the case of a compromised formmail) -Running EXIM in lieu of Qmail( easy/quick install but xinetd forces exim to close and restarts qmail on its own) -Turned on SPF protection via Plesk GUI. Does not help. -Turned on Greylisting via Plesk GUI. Does not help. -Disabled Bounce notifications via command line That which MIGHT work but have complications: -Use POSTFIX instead of QMAIL (No knowledge of POSTIFX and don't want to bother with it unless anyone knows it has potential to handle backscatter WELL before investing time) -As mentioned above, compiling a chkusr patch, we believe will STOP this problem, along with qmail (because of plesk in the mix, the comile fails every time and Parallels Plesk support is unresponsive unless I cough up MONEY) If I don't clear out the SPAM from the outgoing mail queue nightly, then it clogs up with millions of SPAMs and will bring down the OUTGOING email services. Any and all help welcome and appreciated!

  Read the article

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubuntu Lucid

  - by MIDoubleKO

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• Outlook refuses to connect to Exchange

  - by wfaulk

  Outlook 2007 under Windows XP connecting to Exchange 2003 SP2: when started, it flips back and forth between "Connecting to Exchange Server" and "Disconnected" three or four times, then gives up and stays disconnected. I tried deleting the ost file (which was nearly 2GB), turning Cached mode on and off, recreating the account inside the Mail control panel, changing the account to use HTTP, and probably some other things. None of it seemed to make any difference, until … After fiddling with it for a while, I got this absurd error message dialog at startup, and it exits after I click OK: Cannot start Microsoft Office Outlook. Cannot open the Outlook window. The set of folders cannot be opened. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance. (I'm not sure if I can even trust that message. It's so long, it just feels like a random offset into Outlook's stack of error messages.) Either way, the Exchange server is available to everyone else, and is available via OWA from that computer. I ran Process Explorer against Outlook and it showed 5 or so ESTABLISHED connections to our Exchange server, plus listening on two UDP ports, and two CLOSE_WAIT connections to localhost. If I managed to look at Outlook's IP connections while it was doing its Connecting/Disconnected dance, it had a huge number of connections open to the Exchange server. It more than filled ProcExp's dialog box; I'm guessing at least 20, probably more. The only other odd thing is that our network admin at some point added a wildcard DNS record to the domain name that we use for email, and now Outlook will sometimes (always?) start by complaining about autodiscover.example.com's SSL certificate. There is a web server there, but it doesn't have any sort of email autodiscover anything on it. It doesn't make any difference if I click "OK" or "Cancel" (or whatever the buttons are). I also added a bogus entry for the hostname to Windows' hosts file, pointing it at 127.0.0.2, and it stopped complaining about the certificate. (The CLOSE_WAIT sockets above were from before I made this change, and went away after.) I don't think this is related, as the same problem should exist for everyone, but it might be. This is the second time this user has had this problem. The first time, I never found a solution other than reinstalling Outlook. Now that it's a pattern, I'd like to find a permanent solution, rather than assume it's a random glitch.

  Read the article

• Avoid read-write access to bad sectors on HDD to continue working on the HDD

  - by goldenmean

  I have a HP Pavilion dv6446 notebook. It had Windows Vista Home premium. After 4.5+ years of usage, just recently it started malfunctioning. While working fine, its screen goes white or sometimes some thin black lines horizontally. Laptop freezes. Hard reboot works. Again it works for some 2 hrs or so, same error. To diagnose I did run the Memory and Hard disk check which is present in the Bios Setup. Memory test passed. Hard disk test returned an error saying something like - "Replace the hard disk". Bad.. Some sectors or platters have gone bad on the disk. (I confirmed this later by further tests mentioned below) Then I tried installing a Ubuntu 11.10. It listed 3 partitions /dev/sda1, sda2, sda2. It again gave error and could not install grub loader on /dev/sda1. Bad sectors. Then redid the Ubuntu installation, this time asked to to install the Ubuntu on /dev/sda3. and kept /dev/sda1 for /home. Installed fine, and works fine as well. Due to unavailability of WiFi/ Ethernet driver for that adapters under Ubuntu( at least I could not configure them and get the networking working at all), I decided to go back to reinstall windows Vista. It did install fine. I did not have to format one data partition which has my data. I just formatted one partition which installed Windows So in effect HDD has not undergone a full format here. Worked ok for 1 day. But same white screen and freeze happened. Looks like while it is in use, it accesses the bad sectors for storing some data and that's when it bombs. I am inclined to think HDD has not failed fully or crashed but has developed bad sectors. Else if it was a HDD crash, it would have refused to boot at all let alone install on it. Questions: Is there any HDD test check under windows or any such tools windows/linux based ewhere which can identify the bad sectors of the HDD and 'lock/isolate' them from further read-write access of any kind. If not what are my options, if any to salvage this laptop HDD without replacing it. EDIT: Would the Disk Error checking tool under windows help in any way?

  Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >