Search Results

Search found 37931 results on 1518 pages for 'computer case'.

Page 295/1518 | < Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >

• Windows XP installation problems

  - by Samurai Waffle

  I recently asked a question on here, and thought I had it working... Here is a link to it. Windows XP Installation problems So basically I'm having trouble getting XP installed. To sum it up, a computer I have had a boot sector virus, and I used Darik's Nuke and Boot to wipe the hard drive clean. So the hard drive has nothing on it. I had to try and install Windows through a DOS prompt, because for some reason it won't read it off the DVD. The UBCD is able to look at the files located on the DVD I have in, but I can't boot from it for some reason. So I extracted it to a USB drive, booted to DOS and started the setup process. Here's the weird thing with DOS... It can only find the C: drive. The C: drive in DOS is the flash drive that I have in, running DOS. I can't find the hard drive anywhere! So anyways, after starting the setup process, it copied the files over to the "hard drive" (which took 16 hours because the version of DOS I ran couldn't run smartdrv.exe), and it said the computer had to reboot. So I let it reboot, and it stopped and said there is no boot device. So I popped in UBCD that I have installed on a flash drive, and I discovered that it had copied the Windows files over to the flash drive and not the hard drive. It never asked where it should extract the files... So I toyed around with UBCD, ran a memory test on the hard drive to make sure it was fine, and it came out clean. So I'm stuck now. How can I get this installed? Writing this, I came up with an idea. If I copy the DOS startup files over to the hard drive, would I be able to start DOS from it? If so, I believe that could fix my problems. Any help is greatly appreciated, because I am running out of ideas and am at my wits end with this computer.

  Read the article

• How to visualize timer functionality in sequence diagram?

  - by truthseeker

  I am developing software for communication with external device through serial port. To better understand the new functionality I am trying to display it in sequence diagram. Flow of events is as follows. I send to the device command to reset it. This is asynchronous operation so there is some delay between request and response (typically 100 ms). There can be case when the answer never comes (for example device is not connected to the specified port or is currently turned off). For this purpose I create a timer with period twice the maximum answer time. In my case it is 2 * 125 ms = 250 ms. If the answer comes in predefined time interval, I destroy already running timer. If the answer doesnt come in predefined interval, timer initiates some action. After this action we can destroy it. How to effectively model this situation in sequence diagram? Addendum 1: Based on advices made by scarfridge i drew following UML diagram. Comment by Ozair is also helpful for simplifying the diagram even more.

  Read the article

• Presenting the Cloud in a Different Way

  - by BuckWoody

  I had the honor of presenting the Developers at the Portland PASS chapter, and decided to go a different way than just using PowerPoint Slides…. (click on any picture to enlarge) The point is that when you need to get a point across, it’s OK to change tactics to make sure the information sticks. In this case, I decided to make the audience the PowerPoint. I used a few props to show the various paradigms we use to describe what the industry uses for the word “cloud” First, we talked about Infrastructure as a Service. I picked a gentleman who didn’t quite fit the hard hat and safety vest I picked out for him. Notice our “user” as she accesses our “Server” (complete with tray and glass) which has been virtualized.    Software as a service comes next. In this case, the user and potentially even customers just access software (represented here as a Windows ME box…) remotely – everything is virtualized. Finally, Platform as a Service – Yup, Platform shoes as a necklace, and a tie-dye shirt to represent the 70’s – a decade when mainframes used stateless programming as well. Notice also the components of Windows Azure – Compute (Keyboard) Application Fabric (Toy Bus) and Storage (Bucket).   And at the end of the day, it’s all about serving those customers…

  Read the article

• SAP or Navision? Career Path

  - by codebased

  This could be tricky to ask; I may or may not ask this question here but I thought to give it a try. I've been in Software Industry since 2002 and now it has been a time that I'm at Senior level where I normally code, lead and define the architect; giving technical solutions to the management is one of my asset that I've earned during my services. Now it is the time to define the road map for the future, $$$. I am not in favor of Project Management roles. I've been thinking of going through the ERP and my current company does provide me an option to go for Navision/ Microsoft Dynamics. They are currently on 4.0 but they are planning to move for 2009 and also to build one of their own plug-in. Indeed the option is good because Microsoft is trying to accomplish the market for Dynamics products. However, they have less success in Australia. Now, Another option is with SAP where person can go with 200 K $ a year. Where as I'd doubt that if the same kind of growth, financial, is available for Microsoft geek. What is your opinion on Navision or SAP? If I try to completely move to SAP it could be bit challenging as market will consider me a fresher. However the return is quite good. Where in case of Microsoft, I think technology changes so fast that there is a less chance to grow in, within, the same experience; in other word, if any new framework comes in .net then market look for that person who knows this new framework and not .net But in case of SAP, where the base remain same and chances are to grab more money from the market. What would you do if you were me? In stackoverflow - Navision questions are 20+ where in SAP 200+///?? :-)

  Read the article

• NVIDIA error "fallen off the bus"

  - by yurividal

  i have been having a Serious Issue with my LG notebook and its Nvidia Geforce 310M GPU. It usualy (99% of the time) happens when i leave the computer idle for a while, but it has also happened sometimes while i was using the PC. Suddenly, (usualy when computer is idle) the screen goes black, and the pc freezes completely on the black screen. (not even ping responses). The only sollution is to Hard Reset the machine. When analizing the syslog, i see the following error: Sep 18 20:58:08 yuri-notebook kernel: [ 1936.510073] NVRM: GPU at 0000:01:00.0 has fallen off the bus. Sep 18 20:58:08 yuri-notebook kernel: [ 1936.510087] NVRM: GPU at 0000:01:00.0 has fallen off the bus. Sep 18 20:58:08 yuri-notebook kernel: [ 1936.510157] delay: estimated 354, actual 1 Sep 18 20:58:08 yuri-notebook kernel: [ 1936.510173] delay: estimated 353, actual 0 I have already tryed different versions of the Nvidia Drivers, and also tryed removing each of my 2 DDR3 memories. The problem does not seem to be hardware, because when i boot into windows 7, it works normaly, for days. I am desperate with this problem, because it makes my Ubuntu practicaly unusable. Thanks in advance, Yuri

  Read the article

• Looking for Fiddler2 help. connection to gateway refused? Just got rid of a virus

  - by John Mackey

  I use Fiddler2 for facebook game items, and it's been a great success. I accessed a website to download some dat files I needed. I think it was eshare, ziddu or megaupload, one of those. Anyway, even before the rar file had downloaded, I got this weird green shield in the bottom right hand corner of my computer. It said a Trojan was trying to access my computer, or something to that extent. It prompted me to click the shield to begin anti-virus scanning. It turns out this rogue program is called Antivirus System Pro and is pretty hard to get rid of. After discovering the rogue program, I tried using Fiddler and got the following error: [Fiddler] Connection to Gateway failed.Exception Text: No connection could be made because the target machine actively refused it 127.0.0.1:5555 I ended up purchasing SpyDoctor + Antivirus, which I'm told is designed specifically for getting rid of these types of programs. Anyway, I did a quick-scan last night with spydoctor and malware bytes. Malware picked up 2 files, and Spydoctor found 4. Most were insignificant, but it did find a worm called Worm.Alcra.F, which was labeled high-priority. I don’t know if that’s the Anti-Virus Pro or not, but SpyDoctor said it got rid of all of those successfully. I tried to run Fiddler again before leaving home, but was still getting the "gateway failed" error. Im using the newest version of firefox. When I initially set up the Fiddler 2.2.8.6, I couldn’t get it to run at first, so I found this faq on the internet that said I needed to go through ToolsOptionsSettings and set up an HTTP Proxy to 127.0.0.1 and my Port to 8888. Once I set that up and downloaded this fiddler helper as a firefox add-on, it worked fine. When I turn on fiddler, it automatically takes my proxy setting from no proxy (default) to the 127.0.0.1 with Port 8888 set up. It worked fine until my computer detected this virus. Anyway, hopefully I've given you sufficient information to offer me your best advice here. Like I said, Spydoctor says the bad stuff is gone, so maybe the rogue program made some type of change in my fiddler that I could just reset or uncheck or something like that? Or will I need to completely remove fiddler and those dat files and rar files I downloaded? Any help would be greatly appreciated. Thanks for your time.

  Read the article

• Oracle@info360: Advance Beyond Point Solutions To An Enterprise Content Strategy

  - by kellsey.ruppel(at)oracle.com

  The info360/AIIM conference is March 22-24 in Washington DC. We have a number of customer speakers this year talking on the theme of “Advance Beyond Point Solutions To An Enterprise Content Strategy.” These customers all started by addressing a particular use case, but then used the infrastructure they had created to quickly and cost effectively stand up solutions to new business problems.  Andy MacMillan, VP of Product Management at Oracle, will give a thought provoking opening keynote at 8:50 AM on Tuesday, March 22nd. He will be joined by Juan Jose Goldschtein, the CIO of the Organization of American States. The OAS has developed a human rights website that is the front end to a case management system for human rights violations. The implementation supports digital signatures on iPads, so their executives can approve workflows and keep cases moving forward while they are busy traveling and investigating abuses.Other customer speakers include:Tom Robinette, Director of Applications and IT Engineering, Dresser-RandRobin Crisp, Program Manager, FDAMonica Crocker, Corporate Records Manager, Land O’ LakesBrian Skapura, The American Institute of ArchitectsKathy Adams and Leslie Becker, The Nature ConservancyIrfan Motiwala, Sr. VP, Moody’s Investment ServicesMolly Wenzler, Director of Electronic Media, MeadWestvaco Other sessions include our Super Session that kicks off the Oracle Track @info360 on Wednesday. At 11:00 AM, Senior Director of Product Marketing, Howard Beader will present The Social Enterprise – Combining People, Processes and Content. This session will focus on how customers have brought social media, business process management, and content management together to supercharge their organizations. Oracle customers can arrange one-on-one meetings with Oracle executives and product experts, and attend the VIP customer appreciation event. Oracle will be joined by Oracle partners:FujitsuKesteTeamInformaticsKapowSena SystemsDTIYou can learn more about discounts for Oracle customers and register on our Oracle@info360 page.To see more about the customers and sessions that will be presented, you can look at the Oracle Track page on the AIIM/info360 website.Technorati Tags: oracle, AIIM, info360, content management, social enterprise

  Read the article

• Homegroup doesn't show other computers, but "Network" does

  - by McPherrinM

  I have a desktop and a laptop (both running windows 7) in my Windows 7 homegroup. The desktop created the homegroup, and the laptop joined it. Both share a few folders. On the laptop, I have no problem accessing the Desktop's shared folders via the "Homegroup" sidebar button in Windows Explorer. However, on the Desktop, I get the message No other homegroup computers are currently available in the homegroup screen. However, if I go to the Network page, I can see the other computer and browse its shared media. These shares were made by right clicking and choosing "Share with Homegroup". I can access the media, so this isn't a big problem, but I'm just confused as to why the Homegroup screen denies the existence of the other computer. Has anybody else encountered and resolved this?

  Read the article

• How to fix White Screen of Death after updating iTunes?

  - by cust0s

  The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen.

  Read the article

• Disable MOUSE wakeup when doing suspend on UBUNTU

  - by Shadyabhi

  When I do SUSPEND on ubuntu, in order to wake up, i can just move the mouse and the computer will wake up. But, I dont want that the computer is waked up when I move my mouse. How can I do that? My /proc/acpi/wakeup file:- shadyabhi@shadyabhi-desktop:~$ cat /proc/acpi/wakeup Device S-state Status Sysfs node SLPB S4 *enabled P32 S4 disabled pci:0000:00:1e.0 UAR1 S4 disabled pnp:00:09 ILAN S4 disabled pci:0000:00:19.0 PEGP S4 disabled PEX0 S4 disabled pci:0000:00:1c.0 PEX1 S4 disabled pci:0000:00:1c.1 PEX2 S4 disabled pci:0000:00:1c.2 PEX3 S4 disabled pci:0000:00:1c.3 PEX4 S4 disabled pci:0000:00:1c.4 PEX5 S4 disabled UHC1 S3 disabled pci:0000:00:1d.0 UHC2 S3 disabled pci:0000:00:1d.1 UHC3 S3 disabled pci:0000:00:1d.2 UHC4 S3 disabled EHCI S3 disabled pci:0000:00:1d.7 EHC2 S3 disabled pci:0000:00:1a.7 UH42 S3 disabled pci:0000:00:1a.0 UHC5 S3 disabled pci:0000:00:1a.1 UHC6 S3 disabled pci:0000:00:1a.2 AZAL S3 disabled pci:0000:00:1b.0 shadyabhi@shadyabhi-desktop:~$

  Read the article

• 2D platformers: why make the physics dependent on the framerate?

  - by Archagon

  "Super Meat Boy" is a difficult platformer that recently came out for PC, requiring exceptional control and pixel-perfect jumping. The physics code in the game is dependent on the framerate, which is locked to 60fps; this means that if your computer can't run the game at full speed, the physics will go insane, causing (among other things) your character to run slower and fall through the ground. Furthermore, if vsync is off, the game runs extremely fast. Could those experienced with 2D game programming help explain why the game was coded this way? Wouldn't a physics loop running at a constant rate be a better solution? (Actually, I think a physics loop is used for parts of the game, since some of the entities continue to move normally regardless of the framerate. Your character, on the other hand, runs exactly [fps/60] as fast.) What bothers me about this implementation is the loss of abstraction between the game engine and the graphics rendering, which depends on system-specific things like the monitor, graphics card, and CPU. If, for whatever reason, your computer can't handle vsync, or can't run the game at exactly 60fps, it'll break spectacularly. Why should the rendering step in any way influence the physics calculations? (Most games nowadays would either slow down the game or skip frames.) On the other hand, I understand that old-school platformers on the NES and SNES depended on a fixed framerate for much of their control and physics. Why is this, and would it be possible to create a patformer in that vein without having the framerate dependency? Is there necessarily a loss of precision if you separate the graphics rendering from the rest of the engine? Thank you, and sorry if the question was confusing.

  Read the article

• make my Ubuntu 12.04 laptop visible on the network

  - by Andrew Boyd

  I'm ecstatically happy with my 12.04 on my laptop after loading it over my MS Vista... but there's just one thing, one little fly in the ointment.... While I can view our 2 Terabyte, shared hard-drive in the lounge (and copy files back and forth) I can't see my PC (when I boot up in Ubuntu 12.04) nor the Lubuntu computer connected to the TV (for movies, Youtube etc). Printing to the HP office jet on the PC doesnt work over the network either. Have had one dubious flirtation with Samba, which seems to be the only thing I've found that will 'work', however halfway through that "installation" everything just ground to a halt, the directions began to stop making sense... I was working from this page. Our Network consists of the following: Our Internet service is wirelessly sent to us from our provider to our dish on a pole. It comes into the house via an ethernet cable. We split it there to a phone, and to 6 other destinations (bedrooms, computers, and to another splitter in the lounge which has a wifi antennae and 4 ethernet ports). one port goes to the Lubuntu OS PC which is connected to the TV the second port goes to the 2 Terabyte harddrive (MS powered 'Mybooklive') (the other two are empty) My Ubuntu 12.04 laptop connects wirelessly to this splitter in the lounge. I know just enough about computers to get myself into an awful mess without too much trouble We usually can view friends' laptops when they get on our network (as they are invariably MS OS's) Our flatmate, who introduced us to Linux's computer is also invisible How can we make our Linux OS based computers visible on the network and share files and printing?

  Read the article

• ArchBeat Link-o-Rama for 2012-09-20

  - by Bob Rhubart

  Attend OTN Architect Day – by Architects, for Architects – October 25 You won't need 3D glasses to take in these live presentations (8 sessions, two tracks) on Cloud computing, SOA, and engineered systems. And the ticket price is: Zero. Nothing. Absolutely free. Register now for Oracle Technology Network Architect Day in Los Angeles. Thursday October 25, 2012, 8:00am – 5:00pm Sofitel Los Angeles8555 Beverly BoulevardLos Angeles, CA 90048 Loving VirtualBox 4.2… | The ORACLE-BASE Blog Is it wrong for a man to love a technology? Oracle ACE Director Tim Hall has several very good reasons for his feelings… Running RichFaces on WebLogic 12c | Markus Eisele "With all the JMS magic and the different provider checks in the showcase this has become some kind of a challenge to simply build and deploy it," says Oracle ACE Director Markus Eisele. His detailed post will help you to meet that challenge. Oracle ADF Coverage at OOW | Frank Nimphius Frank Nimphius shares a comprehensive and well-organized list of Oracle ADF sessions and activities scheduled for Oracle OpenWorld in San Francisco. OIM 11g R2 Catalog Customization Example | Daniel Gralewski Oracle Fusion Middleware A-Team member Daniel Gralewski's post shows "how OIM catalog can be customized by using OIM UI capabilities such as managed beans and EL expressions. The post first describes the use case and the solution to address the use case; then it describes the solution details as well as provides links to the artifacts." New Book: Oracle BPM Suite 11g: Advanced BPMN Topics | Mark Nelson Redstack blogger Mark Nelson shares an overview of Oracle BPM Suite 11g: Advanced BPMN Topics, the new book he co-authored with Tanya Williams. Nelson describes the book as "a concise presentation of both theory and practical examples of the areas of BPMN where we have encountered the most widespread confusion and misunderstanding." Thought for the Day "I strive for an architecture from which nothing can be taken away." — Helmut Jahn Source: Brainy Quote

  Read the article

• SQL SERVER – Storing Variable Values in Temporary Array or Temporary List

  - by pinaldave

  SQL Server does not support arrays or a dynamic length storage mechanism like list. Absolutely there are some clever workarounds and few extra-ordinary solutions but everybody can;t come up with such solution. Additionally, sometime the requirements are very simple that doing extraordinary coding is not required. Here is the simple case. Let us say here are the values: a, 10, 20, c, 30, d. Now the requirement is to store them in a array or list. It is very easy to do the same in C# or C. However, there is no quick way to do the same in SQL Server. Every single time when I get such requirement, I create a table variable and store the values in the table variables. Here is the example: For SQL Server 2012: DECLARE @ListofIDs TABLE(IDs VARCHAR(100)); INSERT INTO @ListofIDs VALUES('a'),('10'),('20'),('c'),('30'),('d'); SELECT IDs FROM @ListofIDs; GO When executed above script it will give following resultset. Above script will work in SQL Server 2012 only for SQL Server 2008 and earlier version run following code. DECLARE @ListofIDs TABLE(IDs VARCHAR(100), ID INT IDENTITY(1,1)); INSERT INTO @ListofIDs SELECT 'a' UNION ALL SELECT '10' UNION ALL SELECT '20' UNION ALL SELECT 'c' UNION ALL SELECT '30' UNION ALL SELECT 'd'; SELECT IDs FROM @ListofIDs; GO Now in this case, I have to convert numbers to varchars because I have to store mix datatypes in a single column. Additionally, this quick solution does not give any features of arrays (like inserting values in between as well accessing values using array index). Well, do you ever have to store temporary multiple values in SQL Server – if the count of values are dynamic and datatype is not specified early how will you about storing values which can be used later in the programming. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Creating an office network and monitoring all activity without a proxy

  - by Robert

  We are setting up our office network and would like to track all the websites visited by our employees. However, we would not like to use any proxy based solutions. Our work is highly dependent on applications in which you cannot configure a proxy. Hence, the approach we would like to follow is setting up a router inside a computer (something like this : http://www.techrepublic.com/article/configure-windows-server-2003-to-act-as-a-router/5844624) This will also allow us to attach multiple ethernet cards and have redundancy in internet connectivity with complete abstraction from the user about which connection is being used. But most importantly, since all the traffic will be going through the computer (configured as a router) I assume there will be a way to run packet analysis on all the request / responses being made. For example, list all the FTP servers connected to (port 21), give a graph of all the URLs visited per day by frequency. Is there already a software which does this ? Or is it possible to build something like this ?

  Read the article

• KeyRef &ndash; A Keyboard Shortcut Reference Site

  - by Liam McLennan

  The mouse is like computer training wheels. It makes using a computer easier – but it slows you down. Like many of my peers I am making a effort to learn keyboard shortcuts to reduce my dependence on the mouse. So I have started accumulating browser bookmarks to websites listing keyboard shortcuts for vim and resharper etc. Based on the assumption that I am not the only person who finds this untenable I am considering building the ultimate keyboard shortcut reference site. This is an opportunity for me to improve my rails skills and hopefully contribute something useful to the anti-mouse community. Mockups Shortcuts will be grouped by application, so the first thing a user needs to do is find their application. They do this by typing the application name into a textbox and then selecting from a reducing list of applications. This interface will work like the stackoverflow tags page. Selecting an application will take the user to a page that lists the shortcuts for that application. This page will have a permalink for bookmarking. Shortcuts can be searched by keyword or by using the shortcut.

  Read the article

• Cross-Platform Migration using Heterogeneous Data Guard

  - by Roy F. Swonger

  Most people think of Data Guard as a disaster recovery solution, and it certainly excels in that role. However, did you know that you can also use Data Guard for platform migration under some conditions? While you would normally have your primary and standby Data Guard systems running on the same OS and hardware platform, there are some heterogeneous combinations of primary and stanby system that are supported by Data Guard Physical Standby. One example of heterogenous Data Guard support is the ability to go between Linux and Windows on many processor architectures. Another is the support for environments that are running HP-UX on both PA-RIsC and Itanium hardware. Brand new in 11.2.0.2 is the ability to have both SPARC Solaris and IBM AIX on Power Systems in the same Data Guard environment. See My Oracle Support note 413484.1 for all the details about supported platform combinations. So, why mention this in an upgrade blog? Simple: much of the time required for a platform migration is usually spent copying files from one system to another. If you are moving between systems that are supported by heterogenous Data Guard, then you can reduce that migration downtime to a matter of minutes. This can be a big win when downtime is at a premium (and isn't downtime always at a premium? In addition, you get the benefit of being able to keep the old and new environments synchronized until you are sure the migration is successful! A great case study of using Data Guard for a technology refresh is located on this OTN page. The case study showing CERN's methodology isn't highlighted as a link on the overview page, but it is clickable. As always, make sure you are fully versed on the details and restrictions by reading the available documentation and MOS notes. Happy migrating!

  Read the article

• Teamviewer and Virtualbox issue: some keys don't work

  - by Barranka

  I use Teamviewer on a laptop to connect to a desktop computer running Debian Linux. On this desktop computer I run Windows inside a VirtualBox VM. I have no problems interacting directly with Linux, but when I try to interact with Windows inside Virtualbox, some keys simply don't work! (e.g. period, "@", quotes). Is there something I can do to make the full keyboard of my laptop work correctly with the Virtualbox VM inside the remote host? Specs: The remote host machine is an Intel i7 running Debian squeezy (64 bit) I'm using Teamviewer 7, on both the host machine and the laptop Thanks

  Read the article

• What's the best way to partition an SSD?

  - by Sander Rijken

  In case you're creating one partition, should it be as big as possible, or should a certain percentage of space be left unpartitioned?

  Read the article

• Install remote desktop session host remotely

  - by Jorge

  I've removed the remote desktop host role from one of my Azue VM, so I can't RDP into it. I have tried to recreate the endpoints and even the VM with no luck. I can't either access remotely with Server Manager; getting this error: The client cannot connect to the destination specified in the request. Verify that the services on the destination is running" I cannot connect remotely to the registry Make sure this computer is on the network, has remote administration enabled, and that both computers are running the remote registry service PsPing tells me The remote computer refuses the network connection Which workaround can I follow to solve this?

  Read the article

• Would I be able to use code hosting services to host malware code?

  - by NlightNFotis

  Let me start by saying that I am a computer security researcher. Part of my job is to create malware to deploy on a controlled environment in order to study or evaluate several aspects of computer security. Now, I am starting to think that using an online code hosting service (such as BitBucket, Github, etc...) to have all my code in 1 place, would allow me to work on my projects more efficiently. My question is: Are there any issues with this? I have studied those companies' privacy policies, and they state that they allow usage of their services for lawful usage. Since I am not distributing malware, but I am only using it on my machines and machines that I am authorized to use, aren't I allowed to use the service? For the usage that I am doing, malware is the same as any other software. I recognise that I should be extremely careful with code hosting, as any mistake from my part could hold me liable for damages and leave me open against legal action. As such I am recognizing that I should use private repositories, so the code is not available to the public. But how private is a private repository? How can I trust that companies like them will not leak or sell a potential (electronic) viral weaponry that I may have created in the future?

  Read the article

• OPN Exchange Keynote On-Demand

  - by kristin.jellison

  We hope everyone has had a chance to refresh and recharge after Oracle OpenWorld 2013. In case you didn’t have the opportunity to catch the full OPN Exchange keynote, we have it on demand for your viewing pleasure. A highlight reel is up on the OPN YouTube channel and on Oracle.com. You can also watch individual keynote segments, from Oracle Executives like Mark Hurd, John Fowler and Andy Bailey, highlighted below. So please, sit back, relax and enjoy the show! You know, in case your football team is on a bye this week. Mark Hurd, President, Oracle Executive Address John Fowler, Executive Vice President, Systems Hardware and Software Engineered to Work Together Joel Borellis, Group Vice President, Partner Enablement Technology, Middleware and Business Intelligence Chris Baker, Senior Vice President, Worldwide ISV,OEM and Java Sales Engineered Systems and Hardware Andy Bailey, Senior Vice President, Strategic Alliances Cloud, Fusion Applications and Customer Experience Thomas LaRocca, Senior Vice President, North America Sales Alliances and Channels Terri Hall, Group Vice President, North America Sales Alliances and Channels Oracle Partner Excellence Awards: North America Hugo Freytes, Senior Vice President, Latin America Alliances and Channels Oracle Partner Excellence Awards: Latin America Mark Lewis, Senior Vice President, APAC Alliances and Channels Hiroshi Watanabe, Senior Vice President, Japan Alliances and Channels Oracle Partner Excellence Awards: APAC and Japan David Callaghan, Senior Vice President, EMEA Alliances and Channels Oracle Partner Excellence Awards: EMEA Cheers! The OPN Communications Team

  Read the article

• new SBS 2011 Standard problems

  - by Damon

  Brand new SBS 2011 install. I went to remove the DHCP server role. It went into a "Preparing to configure Windows. Do not turn off your computer." Been there for hours. Finally, decided to power off and restart. After boot up, the same window and message appear and it just sits there spinning. "Preparing to configure Windows. Do not turn off your computer." I'd love to get this installed before the end of the day but it doesn't look like that's possible. Any ideas on how to get passed this?

  Read the article

• How does Router know where to forward packet

  - by kornelijepetak

  If several computers with local addresses (192.168.0.#) are connected to a router and each computer opens a web browser and requests a page over HTTP, when these TCP:80 packets are sent out, the router switches the local address with the static IP of the router (i.e. Provider given IP) so the server can reply to the appropriate address. But how does the router know to which computer to forward the HTTP reply, since the TCP header does not contain the local IP address (does it?), and all computers are using port 80? Does this have anything to do with the MAC addresses? How exactly does this work?

  Read the article

• Login Fail - Google Music Manager

  - by TX-NY-CA

  This is on a Surface Pro. I have not installed a virtual machine. Here is Google's feedback on the error message I receive when attempting login: "Login failed. Could not identify your computer" error message If you're receiving a 'Login failed. Could not identify your computer.' error, we couldn’t identify your machine. Please note that at this time, virtual machines aren't supported by Google Play. If you're certain that you don't have a virtual machine, some users have reported that they were able to workaround the issue by disabling their network bridge." My ifconfig feedback, in case that's helpful: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6640 (6.6 KB) TX bytes:6640 (6.6 KB) mlan0 Link encap:Ethernet HWaddr 60:45:bd:f9:04:c0 inet addr:10.129.116.166 Bcast:10.129.116.255 Mask:255.255.255.128 inet6 addr: fe80::6245:bdff:fef9:4c0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:96714 errors:0 dropped:0 overruns:0 frame:0 TX packets:73079 errors:13 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:117500998 (117.5 MB) TX bytes:9008106 (9.0 MB)

  Read the article

< Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >