Search Results

Search found 27143 results on 1086 pages for 'include path'.

Page 295/1086 | < Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >

  • Does (should?) changing the URI scheme name change the semantics?

    - by Doug
    If we take: http://example.com/foo is it fair to say that: ftp://example.com/foo .. points to the same resource, just using a different mechanism for resolving it (and of course possibly a different representation, but perhaps not)? This came to light in a discussion we were having surrounding some internal tooling with Git. We have to process some Git repositories, and they come to use as "git@{authority}/{path}" , however the library we're using to interface with them doesn't support the git protocol. I suggested that we should make the service robust in of that it tries to use HTTP or SSH, in essence, discovering what protocols/schemes are supported for resolving the repository at {path} under each {authority}. This was met with some criticism: "We don't know if that's the same repository". My response was: "It had better be!" Looking at RFC 3986, I see this excerpt: URI "resolution" is the process of determining an access mechanism and the appropriate parameters necessary to dereference a URI; this resolution may require several iterations. To use that access mechanism to perform an action on the URI's resource is to "dereference" the URI. Which makes me think that the resolution process is permitted to try different protocols, because: Although many URI schemes are named after protocols, this does not imply that use of these URIs will result in access to the resource via the named protocol. The only concern I have, I guess, is that I only see reference to the notion of changing protocols when it comes to traversing relationships: it is possible for a single set of hypertext documents to be simultaneously accessible and traversable via each of the "file", "http", and "ftp" schemes if the documents refer to each other with relative references. I'm inclined to think I'm wrong in my initial beliefs, because the Normalization and Comparison section of said RFC doesn't mention any way of treating two URIs as equivalent if they use different schemes. It seems like schemes named/based on IP protocols ought to have this notion, at least?

    Read the article

  • Error configuring virtual hosts with Apache on Windows 8 [on hold]

    - by rushd
    I can't get virtual host to work on my Windows 8. I restart, stop, start Apache, but I get a popup dialog that says: The requested operation has failed! I know it's the line that produces the error, but how can I enable vhost if I don't uncomment the line in httpd.conf? # Virtual hosts Include conf/extra/httpd-vhosts.conf The only thing I did was edited C:\Apache24\conf\httpd.conf by removing the comment on Include conf/extra/httpd-vhosts.conf and edited the file located in C:\Apache24\conf\extra\httpd-vhost.conf. Apache is installed in C:\Apache24 Directory I want to use for Virtual Host is located at C:\Users\TomCODE\brainprojects My vhost.conf looks like this: <VirtualHost *:80> ServerAdmin [email protected] ServerName brain.local DocumentRoot "C:/Users/TomCODE/brainprojects" ErrorLog "logs/brain.local-error.log" CustomLog "logs/local.local-access.log" common </VirtualHost> My hosts file: 127.0.0.1 brain.local I downloaded the file httpd-2.4.9-win64-VC11 from Apache Lounge.

    Read the article

  • Why I am getting Presentation Error [on hold]

    - by user105697
    Below is my code. When I submit it in UVA they are giving me Presentation error. I want to know the reason. I have tried all possible ways. In my code I use 2D-array to store each word of a sentence. I also want to know the reason for giving presentation error. #include<stdio.h> #include<string.h> int main() { char a[10000],ar[100][10000]; int i,j,k,m,n,l,len[10000],c; freopen("input.txt","r",stdin); while(gets(a)) { k=0; i=0; c=0; for(j=0; ; ++k) { if(a[k]==' ' || a[k]=='\0') { ar[i][j]='\0'; len[i]=c; if(a[k]=='\0') break; i++; j=0; c=0; } else { ar[i][j]=a[k]; c++; j++; } } for(m=0; m<=i; m++) { for(n=(len[m]-1); n>=0; n--) { printf("%c",ar[m][n]); } printf(" "); } printf("\n"); } return 0; }

    Read the article

  • Growing your VirtualBox Virtual Disk

    - by Fat Bloke
    Don't you just hate it when this happens: Fortunately, if you're running inside VirtualBox, you can resize your virtual disk and magically make your guest have a bigger disk very easily. There are 2 steps to doing this... 1. Resize the virtual disk Use the VBoxManage command line tool to extend the size of the Virtual Disk, specifying the path to the disk and the size in MB: VBoxManage modifyhd <uuid>|<filename> [--type normal|writethrough|immutable|shareable| readonly|multiattach] [--autoreset on|off] [--compact] [--resize <megabytes>|--resizebyte <bytes>]   If you booted up your guest at this point, the extra space is seen as an unformatted area on the disk, like this: So we now need to tell the guest about the extra space available. 2. Extend the guest's partition to use the extra space How you do this step depends on you guest OS type and the tools you have available. Linux guests often include the excellent gparted partition editor, whereas Windows 7 and 8 provide the Computer Management tool which can resize partitions. Unfortunately, my Windows XP vm has no such tool. But I do have a couple of other options: Most Linux installable .isos include the aforementioned gparted tool, so I could simply attach, say, an Ubuntu.iso as a Virtual CD/DVD in my Windows XP vm and boot off that. Then use gparted to extend the Windows XP partition, before finally rebooting. But I took another route and attached my resized virtual disk to a Windows Server 2012 vm I had lying around. Then I used the Computer Management tool in Windows Server 2012 to extend the partition of the Windows XP disk, before shutting down, unplugging the disk and reattaching to my Windows XP vm. (Note that if your vm's use different disk controllers, Windows will check the disks on booting). When I finally boot up my Windows XP guest I see the available disk space and all is well. At least until the next time - FB 

    Read the article

  • Android save Checkbox State in ListView with Cursor Adapter

    - by Ricardo
    I cant find a way to save the checkbox state when using a Cursor adapter. Everything else works fine but if i click on a checkbox it is repeated when it is recycled. Ive seen examples using array adapters but because of my lack of experience im finding it hard to translate it into using a cursor adapter. Could someone give me an example of how to go about it. Any help appreciated. private class PostImageAdapter extends CursorAdapter { private static final int s = 0; private int layout; Bitmap bm=null; private String PostNumber; TourDbAdapter mDbHelper; public PostImageAdapter (Context context, int layout, Cursor c, String[] from, int[] to, String Postid) { super(context, c); this.layout = layout; PostNumber = Postid; mDbHelper = new TourDbAdapter(context); mDbHelper.open(); } @Override public View newView(Context context, final Cursor c, ViewGroup parent) { ViewHolder holder; LayoutInflater inflater=getLayoutInflater(); View row=inflater.inflate(R.layout.image_post_row, null); holder = new ViewHolder(); holder.Description = (TextView) row.findViewById(R.id.item_desc); holder.cb = (CheckBox) row.findViewById(R.id.item_checkbox); holder.DateTaken = (TextView) row.findViewById(R.id.item_date_taken); holder.Photo = (ImageView) row.findViewById(R.id.item_thumb); row.setTag(holder); int DateCol = c.getColumnIndex(TourDbAdapter.KEY_DATE); String Date = c.getString(DateCol); int DescCol = c.getColumnIndex(TourDbAdapter.KEY_CAPTION); String Description = c.getString(DescCol); int FileNameCol = c.getColumnIndex(TourDbAdapter.KEY_FILENAME); final String FileName = c.getString(FileNameCol); int PostRowCol = c.getColumnIndex(TourDbAdapter.KEY_Post_ID); String RowID = c.getString(PostRowCol); String Path = "sdcard/Tourabout/Thumbs/" + FileName + ".jpg"; Bitmap bm = BitmapFactory.decodeFile(Path, null); holder.Photo.setImageBitmap(bm); holder.DateTaken.setText(Date); holder.Description.setText(Description); holder.cb.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { CheckBox cBox = (CheckBox) v; if (cBox.isChecked()) { mDbHelper.UpdatePostImage(FileName, PostNumber); } else if (!cBox.isChecked()) { mDbHelper.UpdatePostImage(FileName, ""); } } }); return row; }; @Override public void bindView(View row, Context context, final Cursor c) { ViewHolder holder; holder = (ViewHolder) row.getTag(); int DateCol = c.getColumnIndex(TourDbAdapter.KEY_DATE); String Date = c.getString(DateCol); int DescCol = c.getColumnIndex(TourDbAdapter.KEY_CAPTION); String Description = c.getString(DescCol); int FileNameCol = c.getColumnIndex(TourDbAdapter.KEY_FILENAME); final String FileName = c.getString(FileNameCol); int PostRowCol = c.getColumnIndex(TourDbAdapter.KEY_Post_ID); String RowID = c.getString(PostRowCol); String Path = "sdcard/Tourabout/Thumbs/" + FileName + ".jpg"; Bitmap bm = BitmapFactory.decodeFile(Path, null); File x = null; holder.Photo.setImageBitmap(bm); holder.DateTaken.setText(Date); holder.Description.setText(Description); holder.cb.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { CheckBox cBox = (CheckBox) v; if (cBox.isChecked()) { mDbHelper.UpdatePostImage(FileName, PostNumber); } else if (!cBox.isChecked()) { mDbHelper.UpdatePostImage(FileName, ""); } } }); } } static class ViewHolder{ TextView Description; ImageView Photo; CheckBox cb; TextView DateTaken; } }

    Read the article

  • data validation on wpf passwordbox:type password, re-type password

    - by black sensei
    Hello Experts !! I've built a wpf windows application in with there is a registration form. Using IDataErrorInfo i could successfully bind the field to a class property and with the help of styles display meaningful information about the error to users.About the submit button i use the MultiDataTrigger with conditions (Based on a post here on stackoverflow).All went well. Now i need to do the same for the passwordbox and apparently it's not as straight forward.I found on wpftutorial an article and gave it a try but for some reason it wasn't working. i've tried another one from functionalfun. And in this Functionalfun case the properties(databind,databound) are not recognized as dependencyproperty even after i've changed their name as suggested somewhere in the comments plus i don't have an idea whether it will work for a windows application, since it's designed for web. to give you an idea here is some code on textboxes <Window.Resources> <data:General x:Key="recharge" /> <Style x:Key="validButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}" > <Setter Property="IsEnabled" Value="False"/> <Style.Triggers> <MultiDataTrigger> <MultiDataTrigger.Conditions> <Condition Binding="{Binding ElementName=txtRecharge, Path=(Validation.HasError)}" Value="false" /> </MultiDataTrigger.Conditions> <Setter Property="IsEnabled" Value="True" /> </MultiDataTrigger> </Style.Triggers> </Style> <Style x:Key="txtboxerrors" TargetType="{x:Type TextBox}" BasedOn="{StaticResource {x:Type TextBox}}"> <Style.Triggers> <Trigger Property="Validation.HasError" Value="true"> <Setter Property="ToolTip" Value="{Binding RelativeSource={RelativeSource Self}, Path=(Validation.Errors)[0].ErrorContent}"/> <Setter Property="Validation.ErrorTemplate"> <Setter.Value> <ControlTemplate> <DockPanel LastChildFill="True"> <TextBlock DockPanel.Dock="Bottom" FontSize="8" FontWeight="ExtraBold" Foreground="red" Padding="5 0 0 0" Text="{Binding ElementName=showerror, Path=AdornedElement.(Validation.Errors)[0].ErrorContent}"></TextBlock> <Border BorderBrush="Red" BorderThickness="2"> <AdornedElementPlaceholder Name="showerror" /> </Border> </DockPanel> </ControlTemplate> </Setter.Value> </Setter> </Trigger> </Style.Triggers> </Style> </Window.Resources> <TextBox Margin="12,69,12,70" Name="txtRecharge" Style="{StaticResource txtboxerrors}"> <TextBox.Text> <Binding Path="Field" Source="{StaticResource recharge}" ValidatesOnDataErrors="True" UpdateSourceTrigger="PropertyChanged"> <Binding.ValidationRules> <ExceptionValidationRule /> </Binding.ValidationRules> </Binding> </TextBox.Text> </TextBox> <Button Height="23" Margin="98,0,0,12" Name="btnRecharge" VerticalAlignment="Bottom" Click="btnRecharge_Click" HorizontalAlignment="Left" Width="75" Style="{StaticResource validButton}">Recharge</Button> some C# : class General : IDataErrorInfo { private string _field; public string this[string columnName] { get { string result = null; if(columnName == "Field") { if(Util.NullOrEmtpyCheck(this._field)) { result = "Field cannot be Empty"; } } return result; } } public string Error { get { return null; } } public string Field { get { return _field; } set { _field = value; } } } So what are suggestion you guys have for me? I mean how would you go about this? how do you do this since the databinding first purpose here is not to load data onto the fields they are just (for now) for data validation. thanks for reading this.

    Read the article

  • Creating a multi-tenant application using PostgreSQL's schemas and Rails

    - by ramon.tayag
    Stuff I've already figured out I'm learning how to create a multi-tenant application in Rails that serves data from different schemas based on what domain or subdomain is used to view the application. I already have a few concerns answered: How can you get subdomain-fu to work with domains as well? Here's someone that asked the same question which leads you to this blog. What database, and how will it be structured? Here's an excellent talk by Guy Naor, and good question about PostgreSQL and schemas. I already know my schemas will all have the same structure. They will differ in the data they hold. So, how can you run migrations for all schemas? Here's an answer. Those three points cover a lot of the general stuff I need to know. However, in the next steps I seem to have many ways of implementing things. I'm hoping that there's a better, easier way. Finally, to my question When a new user signs up, I can easily create the schema. However, what would be the best and easiest way to load the structure that the rest of the schemas already have? Here are some questions/scenarios that might give you a better idea. Should I pass it on to a shell script that dumps the public schema into a temporary one, and imports it back to my main database (pretty much like what Guy Naor says in his video)? Here's a quick summary/script I got from the helpful #postgres on freenode. While this will probably work, I'm gonna have to do a lot of stuff outside of Rails, which makes me a bit uncomfortable.. which also brings me to the next question. Is there a way to do this straight from Ruby on Rails? Like create a PostgreSQL schema, then just load the Rails database schema (schema.rb - I know, it's confusing) into that PostgreSQL schema. Is there a gem/plugin that has these things already? Methods like "create_pg_schema_and_load_rails_schema(the_new_schema_name)". If there's none, I'll probably work at making one, but I'm doubtful about how well tested it'll be with all the moving parts (especially if I end up using a shell script to create and manage new PostgreSQL schemas). Thanks, and I hope that wasn't too long! UPDATE May 11, 2010 11:26 GMT+8 Since last night I've been able to get a method to work that creates a new schema and loads schema.rb into it. Not sure if what I'm doing is correct (seems to work fine, so far) but it's a step closer at least. If there's a better way please let me know. module SchemaUtils def self.add_schema_to_path(schema) conn = ActiveRecord::Base.connection conn.execute "SET search_path TO #{schema}, #{conn.schema_search_path}" end def self.reset_search_path conn = ActiveRecord::Base.connection conn.execute "SET search_path TO #{conn.schema_search_path}" end def self.create_and_migrate_schema(schema_name) conn = ActiveRecord::Base.connection schemas = conn.select_values("select * from pg_namespace where nspname != 'information_schema' AND nspname NOT LIKE 'pg%'") if schemas.include?(schema_name) tables = conn.tables Rails.logger.info "#{schema_name} exists already with these tables #{tables.inspect}" else Rails.logger.info "About to create #{schema_name}" conn.execute "create schema #{schema_name}" end # Save the old search path so we can set it back at the end of this method old_search_path = conn.schema_search_path # Tried to set the search path like in the methods above (from Guy Naor) # conn.execute "SET search_path TO #{schema_name}" # But the connection itself seems to remember the old search path. # If set this way, it works. conn.schema_search_path = schema_name # Directly from databases.rake. # In Rails 2.3.5 databases.rake can be found in railties/lib/tasks/databases.rake file = "#{Rails.root}/db/schema.rb" if File.exists?(file) Rails.logger.info "About to load the schema #{file}" load(file) else abort %{#{file} doesn't exist yet. It's possible that you just ran a migration!} end Rails.logger.info "About to set search path back to #{old_search_path}." conn.schema_search_path = old_search_path end end

    Read the article

  • boost::asio::async_read_until problem

    - by user368831
    Hi again, I'm modify the boost asio echo example to use async_read_until to read the input word by word. Even though I am using async_read_until all the data sent seems to be read from the socket. Could someone please advise: #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { std::cout<<"starting"<<std::endl; boost::asio::async_read_until(socket_, buffer, ' ', boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { std::ostringstream ss; ss<<&buffer; std::string s = ss.str(); std::cout<<s<<std::endl; if (!error) { boost::asio::async_write(socket_, boost::asio::buffer(s), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); } else { delete this; } } void handle_write(const boost::system::error_code& error) { std::cout<<"handling write"<<std::endl; if (!error) { } else { delete this; } } private: tcp::socket socket_; boost::asio::streambuf buffer; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } Thanks!

    Read the article

  • boost::asio::async_read_until problem

    - by user368831
    I'm trying to modify the echo server example from boost asio and I'm running into problem when I try to use boost::asio::async_read_until. Here's the code: #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { std::cout<<"starting"<<std::endl; boost::asio::async_read_until(socket_, boost::asio::buffer(data_, max_length), ' ', boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { std::cout<<"handling read"<<std::endl; if (!error) { boost::asio::async_write(socket_, boost::asio::buffer(data_, bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); } else { delete this; } } void handle_write(const boost::system::error_code& error) { if (!error) { /* socket_.async_read_some(boost::asio::buffer(data_, max_length), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); */ } else { delete this; } } private: tcp::socket socket_; enum { max_length = 1024 }; char data_[max_length]; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } The problem is when I try to compile I get this weird error: server.cpp: In member function ‘void session::start()’: server.cpp:27: error: no matching function for call to ‘async_read_until(boost::asio::basic_stream_socket &, boost::asio::mutable_buffers_1, char, boost::_bi::bind_t, boost::_bi::list3, boost::arg<1 ()(), boost::arg<2 ()() )’ Can someone please explain what's going on? From what I can tell the arguments to async_read_until are correct. Thanks!

    Read the article

  • Can't view order in magento

    - by koko
    Hi, I've been setting up a fresh magento 1.4.0.1 install, working great so far. I did some test orders just to see. Everything works fine, but when I click on "view order" under "my orders", I get a bunch of error messages: There has been an error processing your request Notice: iconv_substr() [function.iconv-substr]: Unknown error (0) in /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Helper/String.php on line 98 Trace: #0 [internal function]: mageCoreErrorHandler(8, 'iconv_substr() ...', '/data/web/A1423...', 98, Array) #1 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Helper/String.php(98): iconv_substr('1', 0, 50, 'UTF-8') #2 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Helper/String.php(173): Mage_Core_Helper_String-substr('1', 0, 50) #3 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Helper/String.php(112): Mage_Core_Helper_String-str_split('1', 50) #4 /data/web/A14237/htdocs/magento/app/design/frontend/base/default/template/sales/order/items/renderer/default.phtml(58): Mage_Core_Helper_String-splitInjection('1') #5 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(189): include('/data/web/A1423...') #6 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(225): Mage_Core_Block_Template-fetchView('frontend/base/d...') #7 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(242): Mage_Core_Block_Template-renderView() #8 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(674): Mage_Core_Block_Template-_toHtml() #9 /data/web/A14237/htdocs/magento/app/code/core/Mage/Sales/Block/Items/Abstract.php(137): Mage_Core_Block_Abstract-toHtml() #10 /data/web/A14237/htdocs/magento/app/design/frontend/base/default/template/sales/order/items.phtml(52): Mage_Sales_Block_Items_Abstract-getItemHtml(Object(Mage_Sales_Model_Order_Item)) #11 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(189): include('/data/web/A1423...') #12 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(225): Mage_Core_Block_Template-fetchView('frontend/base/d...') #13 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(242): Mage_Core_Block_Template-renderView() #14 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(674): Mage_Core_Block_Template-_toHtml() #15 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(516): Mage_Core_Block_Abstract-toHtml() #16 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(467): Mage_Core_Block_Abstract-_getChildHtml('order_items', true) #17 /data/web/A14237/htdocs/magento/app/design/frontend/base/default/template/sales/order/view.phtml(64): Mage_Core_Block_Abstract-getChildHtml('order_items') #18 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(189): include('/data/web/A1423...') #19 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(225): Mage_Core_Block_Template-fetchView('frontend/base/d...') #20 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(242): Mage_Core_Block_Template-renderView() #21 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(674): Mage_Core_Block_Template-_toHtml() #22 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(516): Mage_Core_Block_Abstract-toHtml() #23 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(463): Mage_Core_Block_Abstract-_getChildHtml('sales.order.vie...', true) #24 /data/web/A14237/htdocs/magento/app/code/core/Mage/Page/Block/Html/Wrapper.php(52): Mage_Core_Block_Abstract-getChildHtml('', true, true) #25 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(674): Mage_Page_Block_Html_Wrapper-_toHtml() #26 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Text/List.php(43): Mage_Core_Block_Abstract-toHtml() #27 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(674): Mage_Core_Block_Text_List-_toHtml() #28 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(516): Mage_Core_Block_Abstract-toHtml() #29 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(467): Mage_Core_Block_Abstract-_getChildHtml('content', true) #30 /data/web/A14237/htdocs/magento/app/design/frontend/base/default/template/page/2columns-left.phtml(48): Mage_Core_Block_Abstract-getChildHtml('content') #31 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(189): include('/data/web/A1423...') #32 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(225): Mage_Core_Block_Template-fetchView('frontend/base/d...') #33 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Template.php(242): Mage_Core_Block_Template-renderView() #34 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Block/Abstract.php(674): Mage_Core_Block_Template-_toHtml() #35 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Model/Layout.php(536): Mage_Core_Block_Abstract-toHtml() #36 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Controller/Varien/Action.php(389): Mage_Core_Model_Layout-getOutput() #37 /data/web/A14237/htdocs/magento/app/code/core/Mage/Sales/controllers/OrderController.php(100): Mage_Core_Controller_Varien_Action-renderLayout() #38 /data/web/A14237/htdocs/magento/app/code/core/Mage/Sales/controllers/OrderController.php(136): Mage_Sales_OrderController-_viewAction() #39 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Controller/Varien/Action.php(418): Mage_Sales_OrderController-viewAction() #40 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Controller/Varien/Router/Standard.php(254): Mage_Core_Controller_Varien_Action-dispatch('view') #41 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Controller/Varien/Front.php(177): Mage_Core_Controller_Varien_Router_Standard-match(Object(Mage_Core_Controller_Request_Http)) #42 /data/web/A14237/htdocs/magento/app/code/core/Mage/Core/Model/App.php(304): Mage_Core_Controller_Varien_Front-dispatch() #43 /data/web/A14237/htdocs/magento/app/Mage.php(596): Mage_Core_Model_App-run(Array) #44 /data/web/A14237/htdocs/magento/index.php(78): Mage::run('', 'store') #45 {main} gtx, koko

    Read the article

  • WPF Storyboard flicker issue

    - by Vinjamuri
    With the code below, the control flickers whenever the image is changed for MouseOver/MousePressed? I am using Storyboard and Double animation.The image display is very smooth with WPF Triggers but not with Storyboard. Can anyone help me to fix this issue? <Style TargetType="{x:Type local:ButtonControl}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type local:ButtonControl}"> <Grid> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="CommonStates"> <VisualState x:Name="Normal"> <Storyboard> <DoubleAnimation Duration="00:00:00.20" Storyboard.TargetName="imgNormal" Storyboard.TargetProperty="Opacity" To="1" /> </Storyboard> </VisualState> <VisualState x:Name="MouseOver"> <Storyboard> <DoubleAnimation Duration="00:00:00.20" Storyboard.TargetName="imgOver" Storyboard.TargetProperty="Opacity" To="1" /> </Storyboard> </VisualState> <VisualState x:Name="Disabled"> <Storyboard> <DoubleAnimation Duration="00:00:00.20" Storyboard.TargetName="imgDisable" Storyboard.TargetProperty="Opacity" To="1" /> </Storyboard> </VisualState> <VisualState x:Name="Pressed"> <Storyboard> <DoubleAnimation Duration="00:00:00.20" Storyboard.TargetName="imgPress" Storyboard.TargetProperty="Opacity" To="1" /> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <Grid> <Border x:Name="imgNormal" Opacity="0"> <Image Source="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=NormalImage}" Stretch="UniformToFill"/> </Border> </Grid> <Grid> <Border x:Name="imgOver" Opacity="0"> <Image Source="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=MouseOverImage}" Stretch="UniformToFill"/> </Border> </Grid> <Grid> <Border x:Name="imgDisable" Opacity="0"> <Image Source="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=DisableImage}" Stretch="UniformToFill"/> </Border> </Grid> <Grid> <Border x:Name="imgPress" Opacity="0"> <Image Source="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=MousePressImage}" Stretch="UniformToFill"/> </Border> </Grid> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style>

    Read the article

  • Implementing Unit Testing on the iPhone

    - by james.ingham
    Hi, So I've followed this tutorial to setup unit testing on my app when I got a little stuck. At bullet point 8 in that tutorial it shows this image, which is what I should be expecting when I build: However this isn't what I get when I build. I get this error message: Command /bin/sh failed with exit code 1 as well as the error message the unit test has created. Then, when I expand on the first error I get this: PhaseScriptExecution "Run Script" "build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh" cd "/Users/james/Desktop/FYP/3D Pool" setenv ACTION build setenv ALTERNATE_GROUP staff ... setenv XCODE_VERSION_MAJOR 0300 setenv XCODE_VERSION_MINOR 0320 setenv YACC /Developer/usr/bin/yacc /bin/sh -c "\"/Users/james/Desktop/FYP/3D Pool/build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh\"" /Developer/Tools/RunPlatformUnitTests.include:412: note: Started tests for architectures 'i386' /Developer/Tools/RunPlatformUnitTests.include:419: note: Running tests for architecture 'i386' (GC OFF) objc[12589]: GC: forcing GC OFF because OBJC_DISABLE_GC is set Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' started at 2010-01-04 21:05:06 +0000 Test Suite 'LogicTests' started at 2010-01-04 21:05:06 +0000 Test Case '-[LogicTests testFail]' started. /Users/james/Desktop/FYP/3D Pool/LogicTests.m:17: error: -[LogicTests testFail] : Must fail to succeed. Test Case '-[LogicTests testFail]' failed (0.000 seconds). Test Suite 'LogicTests' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.000) seconds Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.002) seconds /Developer/Tools/RunPlatformUnitTests.include:448: error: Failed tests for architecture 'i386' (GC OFF) /Developer/Tools/RunPlatformUnitTests.include:462: note: Completed tests for architectures 'i386' Command /bin/sh failed with exit code 1 Now this is very odd as it is running the tests (and succeeding as you can see my STFail firing) because if I add a different test which passes I get no errors, so the tests are working fine. But why am I getting this extra build fail? It may also be of note that when downloading solutions/templates which should work out the box, I get the same error. I'm guessing I've set something up wrong here but I've just followed a tutorial 100% correctly!! If anyone could help I'd be very grateful! Thanks EDIT: According to this blog, this post and a few other websites, I'm not the only one getting this problem. It has been like this since the release of xCode 3.2, assuming the apple dev center documents and tutorials etc are pre-3.2 as well. However some say its a known issue whereas others seem to think this was intentional. I for one would like both the extended console and in code messages, and I certainly do not like the "Command /bin/sh..." error and really think they would have documented such an update. Hopefully it will be fixed soon anyway. UPDATE: Here's confirmation it's something changed since the release of xCode 3.2.1. This image: is from my test build using 3.2.1. This one is from an older version (3.1.4): . (The project for both was unchanged).

    Read the article

  • Drawing a WPF UserControl with DataBinding to an Image

    - by LorenVS
    Hey Everyone, So I'm trying to use a WPF User Control to generate a ton of images from a dataset where each item in the dataset would produce an image... I'm hoping I can set it up in such a way that I can use WPF databinding, and for each item in the dataset, create an instance of my user control, set the dependency property that corresponds to my data item, and then draw the user control to an image, but I'm having problems getting it all working (not sure whether databinding or drawing to the image is my problem) Sorry for the massive code dump, but I've been trying to get this working for a couple of hours now, and WPF just doesn't like me (have to learn at some point though...) My User Control looks like this: <UserControl x:Class="Bleargh.ImageTemplate" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:c="clr-namespace:Bleargh" x:Name="ImageTemplateContainer" Height="300" Width="300"> <Canvas> <TextBlock Canvas.Left="50" Canvas.Top="50" Width="200" Height="25" FontSize="16" FontFamily="Calibri" Text="{Binding Path=Booking.Customer,ElementName=ImageTemplateContainer}" /> <TextBlock Canvas.Left="50" Canvas.Top="100" Width="200" Height="25" FontSize="16" FontFamily="Calibri" Text="{Binding Path=Booking.Location,ElementName=ImageTemplateContainer}" /> <TextBlock Canvas.Left="50" Canvas.Top="150" Width="200" Height="25" FontSize="16" FontFamily="Calibri" Text="{Binding Path=Booking.ItemNumber,ElementName=ImageTemplateContainer}" /> <TextBlock Canvas.Left="50" Canvas.Top="200" Width="200" Height="25" FontSize="16" FontFamily="Calibri" Text="{Binding Path=Booking.Description,ElementName=ImageTemplateContainer}" /> </Canvas> </UserControl> And I've added a dependency property of type "Booking" to my user control that I'm hoping will be the source for the databound values: public partial class ImageTemplate : UserControl { public static readonly DependencyProperty BookingProperty = DependencyProperty.Register("Booking", typeof(Booking), typeof(ImageTemplate)); public Booking Booking { get { return (Booking)GetValue(BookingProperty); } set { SetValue(BookingProperty, value); } } public ImageTemplate() { InitializeComponent(); } } And I'm using the following code to render the control: List<Booking> bookings = Booking.GetSome(); for(int i = 0; i < bookings.Count; i++) { ImageTemplate template = new ImageTemplate(); template.Booking = bookings[i]; RenderTargetBitmap bitmap = new RenderTargetBitmap( (int)template.Width, (int)template.Height, 120.0, 120.0, PixelFormats.Pbgra32); bitmap.Render(template); BitmapEncoder encoder = new PngBitmapEncoder(); encoder.Frames.Add(BitmapFrame.Create(bitmap)); using (Stream s = File.OpenWrite(@"C:\Code\Bleargh\RawImages\" + i.ToString() + ".png")) { encoder.Save(s); } } EDIT: I should add that the process works without any errors whatsoever, but I end up with a directory full of plain-white images, not text or anything... And I have confirmed using the debugger that my Booking objects are being filled with the proper data... EDIT 2: Did something I should have done a long time ago, set a background on my canvas, but that didn't change the output image at all, so my problem is most definitely somehow to do with my drawing code (although there may be something wrong with my databinding too)

    Read the article

  • How can I best share Ant targets between projects?

    - by Rob Hruska
    Is there a well-established way to share Ant targets between projects? I have a solution currently, but it's a bit inelegant. Here's what I'm doing so far. I've got a file called ivy-tasks.xml hosted on a server on our network. This file contains, among other targets, boilerplate tasks for managing project dependencies with Ivy. For example: <project name="ant-ivy-tasks" default="init-ivy" xmlns:ivy="antlib:org.apache.ivy.ant"> ... <target name="ivy-download" unless="skip.ivy.download"> <mkdir dir="${ivy.jar.dir}"/> <echo message="Installing ivy..."/> <get src="http://repo1.maven.org/maven2/org/apache/ivy/ivy/${ivy.install.version}/ivy-${ivy.install.version}.jar" dest="${ivy.jar.file}" usetimestamp="true"/> </target> <target name="ivy-init" depends="ivy-download" description="-> Defines ivy tasks and loads global settings"> <path id="ivy.lib.path"> <fileset dir="${ivy.jar.dir}" includes="*.jar"/> </path> <taskdef resource="org/apache/ivy/ant/antlib.xml" uri="antlib:org.apache.ivy.ant" classpathref="ivy.lib.path"/> <ivy:settings url="http://myserver/ivy/settings/ivysettings-user.xml"/> </target> ... </project> The reason this file is hosted is because I don't want to: Check the file into every project that needs it - this will result in duplication, making maintaining the targets harder. Have my build.xml depend on checking out a project from source control - this will make the build have more XML at the top-level just to access the file. What I do with this file in my projects' build.xmls is along the lines of: <property name="download.dir" location="download"/> <mkdir dir="${download.dir}"/> <echo message="Downloading import files to ${download.dir}"/> <get src="http://myserver/ivy/ivy-tasks.xml" dest="${download.dir}/ivy-tasks.xml" usetimestamp="true"/> <import file="${download.dir}/ivy-tasks.xml"/> The "dirty" part about this is that I have to do the above steps outside of a target, because the import task must be at the top-level. Plus, I still have to include this XML in all of the build.xml files that need it (i.e. there's still some amount of duplication). On top of that, there might be additional situations where I might have common (non-Ivy) tasks that I'd like imported. If I were to provide these tasks using Ivy's dependency management I'd still have problems, since by the time I'd have resolved the dependencies I would have to be inside of a target in my build.xml, and unable to import (due to the constraint mentioned above). Is there a better solution for what I'm trying to accomplish?

    Read the article

  • How can I bind the nested viewmodels to properties of a control

    - by Robert
    I used Microsoft's Chart Control of the WPF toolkit to write my own chart control. I blogged about it here. My Chart control stacks the yaxes in the chart on top of each other. As you can read in the article this all works quite well. Now I want to create a viewmodel that controls the data and axes in the chart. So far I'm able to add axes to the chart and show them in the chart. But I have a problem when I try to add the lineseries because it has one DependentAxis and one InDependentAxis property. I don't know how to assign the proper xAxis and yAxis controls to it. Below you see part of the LineSeriesViewModel. It has a nested XAxisViewModel and YAxisViewModel property. public class LineSeriesViewModel : ViewModelBase, IChartComponent { XAxisViewModel _xAxis; public XAxisViewModel XAxis { get { return _xAxis; } set { _xAxis = value; RaisePropertyChanged(() => XAxis); } } //The YAxis Property look the same } The viewmodels all have their own datatemplate. The xaml code looks like this: <UserControl.Resources> <DataTemplate x:Key="xAxisTemplate" DataType="{x:Type l:YAxisViewModel}"> <chart:LinearAxis x:Name="yAxis" Orientation="Y" Location="Left" Minimum="0" Maximum="10" IsHitTestVisible="False" Width="50" /> </DataTemplate> <DataTemplate x:Key="yAxisTemplate" DataType="{x:Type l:XAxisViewModel}"> <chart:LinearAxis x:Name="xAxis" Orientation="X" Location="Bottom" Minimum="0" Maximum="100" IsHitTestVisible="False" Height="50" /> </DataTemplate> <DataTemplate DataType="{x:Type l:LineSeriesViewModel}"> <!--Binding doesn't work on the Dependent and IndependentAxis! --> <!--YAxis XAxis and Series are properties of the LineSeriesViewModel --> <l:FastLineSeries DependentAxis="{Binding Path=YAxis}" IndependentAxis="{Binding Path=XAxis}" ItemsSource="{Binding Path=Series}"/> </DataTemplate> <Style TargetType="ItemsControl"> <Setter Property="ItemsPanel"> <Setter.Value> <ItemsPanelTemplate> <!--My stacked chart control --> <l:StackedPanel x:Name="stackedPanel" Width="Auto" Height="Auto" Background="LightBlue"> </l:StackedPanel> </ItemsPanelTemplate> </Setter.Value> </Setter> </Style> </UserControl.Resources> <Grid HorizontalAlignment="Stretch" VerticalAlignment="Stretch" ClipToBounds="True"> <!-- View is an ObservableCollection of all axes and series--> <ItemsControl x:Name="chartItems" ItemsSource="{Binding Path=View}" Focusable="False"> </ItemsControl> </Grid> This code works quite well. When I add axes they get drawn. But the DependentAxis and InDependentAxis of the lineseries control stay null, so the series doesn't get drawn. How can I bind the nested viewmodels to the properties of a control?

    Read the article

  • boost::asio::async_write problem

    - by user368831
    Hi, I'm trying to figure out how asynchronous reads and writes work in boost asio by manipulating the echo example. Currently, I have a server that should, when sent a sentence, respond with only the first word. However, the boost::asio::async_write never seems to complete even though the write handler is being called. Can someone please explain what's going on? Here's the code: #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { std::cout<<"starting"<<std::endl; boost::asio::async_read_until(socket_, buffer, ' ', boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { // std::ostringstream ss; // ss<<&buffer; char* c = new char[bytes_transferred]; //std::string s; buffer.sgetn(c,bytes_transferred); std::cout<<"data: "<< c<<" bytes: "<<bytes_transferred<<std::endl; if (!error) { boost::asio::async_write(socket_, boost::asio::buffer(c,bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); } else { delete this; } } void handle_write(const boost::system::error_code& error) { std::cout<<"handling write"<<std::endl; if (!error) { } else { delete this; } } private: tcp::socket socket_; boost::asio::streambuf buffer; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } Thanks!

    Read the article

  • How is WPF Data Binding using Object Data Source in Visual Studio 2010 done?

    - by Rob Perkins
    This is probably mostly a question about how to use the VS 2010 IDE tools in a way the Microsofties didn't specifically intend. But since this is something I immediately tried without success. I have defined a .NET 4.0 WPF Application project with a simple class that looks like this: Public Class Class1 Public Property One As String = "OneString" Public Property Two As String = "TwoString" End Class I then defined it as an "Object Data Source" in VS2010, using the IDE's "Add New Data Source..." feature. This exposes the class members in a GUI element in the IDE as given in this image: Dragging "Class1" from that tool to the surface of "Window1.xaml" in a default "WPF Application" results in the design view looking like this: And generated XAML like this: <Window x:Class="Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="133" Width="170" xmlns:my="clr-namespace:WpfApplication1" mc:Ignorable="d" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" > <Window.Resources> <CollectionViewSource x:Key="Class1ViewSource" d:DesignSource="{d:DesignInstance my:Class1, CreateList=True}" /> </Window.Resources> <Grid DataContext="{StaticResource Class1ViewSource}" HorizontalAlignment="Left" Name="Grid1" VerticalAlignment="Top"> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" /> <ColumnDefinition Width="Auto" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> </Grid.RowDefinitions> <Label Content="One:" Grid.Column="0" Grid.Row="0" HorizontalAlignment="Left" Margin="3" VerticalAlignment="Center" /> <TextBlock Grid.Column="1" Grid.Row="0" Height="23" HorizontalAlignment="Left" Margin="3" Name="OneTextBlock" Text="{Binding Path=One}" VerticalAlignment="Center" /> <Label Content="Two:" Grid.Column="0" Grid.Row="1" HorizontalAlignment="Left" Margin="3" VerticalAlignment="Center" /> <TextBlock Grid.Column="1" Grid.Row="1" Height="23" HorizontalAlignment="Left" Margin="3" Name="TwoTextBlock" Text="{Binding Path=Two}" VerticalAlignment="Center" /> </Grid> Note the data bindings Text="{Binding Path=One}" and Text="{Binding Path=Two}" in the TextBlock elements. Code-behind for Window1.xaml has this in Window_Loaded: Class Window1 Private m_c1 As New Class1 Private Sub Window1_Loaded(ByVal sender As Object, ByVal e As System.Windows.RoutedEventArgs) Handles Me.Loaded Dim Class1ViewSource As System.Windows.Data.CollectionViewSource = CType(Me.FindResource("Class1ViewSource"), System.Windows.Data.CollectionViewSource) 'Load data by setting the CollectionViewSource.Source property: 'Class1ViewSource.Source = [generic data source] Me.DataContext = m_c1 End Sub End Class Running the application produces this output: The expected result was that "OneString" would appear next to "One" and "TwoString" next to "Two" in the running window. The question is: Why didn't this work? What will work instead? If I put bindings in a DataTemplate, it works. Blend, with its sample data stuff, implied that this should work, but it doesn't. I know I'm missing something pretty fundamental here; what is it?

    Read the article

  • Hosting Mercurial on IIS7

    - by Lasse V. Karlsen
    Note, this might perhaps be best suited on serverfault.com, but since it is about hosting a programmer source code repository, I am not entirely sure. I'm posting here first, trusting that it'll be migrated if necessary. I'm attempting to host clones of my Mercurial repositories on my own server (I have the main repo somewhere else), and I'm attempting to set up Mercurial under IIS. I followed the guide here, but I get an error message. Solved: See bottom of this question for details. The error message is: mercurial.error.RepoError: repository /path/to/repo/or/config not found Here's what I did. I installed Mercurial 1.5.2 I created c:\inetpub\hg I downloaded the hg source as per the instructions of the webpage, and copied the hgweb.cgi file into c:\inetpub\hg (note, the webpage says hgwebdir.cgi, but this particular file does not exist, hgweb.cgi does, however, can this be the source of the problem?) I added a hgweb.config, with the following contents: [paths] repo1 = C:/hg/** [web] style = monoblue I created c:\hg, created a sub-directory test, and created a repository inside it I installed python 2.6.5, latest 2.6 version from the website (the webpage mentions I need to install the correct version or I'll get a specific error message, since I don't get an error message that looks remotely like the one mentioned, I assume that 2.6.5 is not the problem) I added a new virtual host hg.vkarlsen.no, pointing it to c:\inetpub\hg For this host, I added a script mapping under the Handler Mappings section, mapping *.cgi to c:\python26\python.exe -u %s %s as per the instructions on the website. I then tested it by navigating to http://hg.vkarlsen.no/hgweb.cgi, but I get an error message. To make it easier to test, I dropped to a command prompt, navigated to c:\inetpub\hg, and executed the following command (error message is part of the text below): C:\inetpub\hg>c:\python26\python.exe -u hgweb.cgi Traceback (most recent call last): File "hgweb.cgi", line 16, in <module> application = hgweb(config) File "mercurial\hgweb\__init__.pyc", line 12, in hgweb File "mercurial\hgweb\hgweb_mod.pyc", line 30, in __init__ File "mercurial\hg.pyc", line 82, in repository File "mercurial\localrepo.pyc", line 2221, in instance File "mercurial\localrepo.pyc", line 62, in __init__ mercurial.error.RepoError: repository /path/to/repo/or/config not found Does anyone know what I need to look at in order to fix this? Edit: Ok, I think I managed to get one step closer to the solution, but I'm still stumped. I realized the .cgi file is a python script file, and not something compile, so I opened it for editing, and these lines was sitting in it: # Path to repo or hgweb config to serve (see 'hg help hgweb') config = "/path/to/repo/or/config" So this was my source for the specific error message. If I change the line to this: config = "c:\\hg\\test" Then I can navigate the empty repository through the Mercurial web interface. However, I want to host multiple repositories, and seeing as the line says that I can also link to a hgweb config file, I tried this: config = "c:\\inetpub\\hg\\hgweb.config" But then I get the following error message: mercurial.error.Abort: c:\inetpub\hg\hgweb.config: not a Mercurial bundle file Exception ImportError: 'No module named shutil' in <bound method bundlerepository.__del__ of <mercurial.bundlerepo.bundlerepository object at 0x0260A110>> ignored Nothing I've tried for the config variable seems to work: config = "hgweb.config" config = "c:\\hg\\hgweb.config" various other variations I don't remember. So, still stumped, pointers anyone? Solved: I ended up having to edit the hgweb.cgi file: from: from mercurial.hgweb import hgweb, wsgicgi application = hgweb(config) to: from mercurial.hgweb import hgweb, hgwebdir, wsgicgi application = hgwebdir(config) Note the added hgwebdir parts there. Here's my hgweb.config file, located in the same directory as hgweb.cgi file: [collections] C:/hg/ = C:/hg/ [web] style = gitweb This now serves my repositories successfully. Hopefully this question will give others some information if they're stumped as I was.

    Read the article

  • What are ProductCode & UpgradeCode & GUID? How to detect if certain application/library is already i

    - by claws
    I've already gone through: http://stackoverflow.com/questions/211192/check-if-the-application-is-already-installed http://stackoverflow.com/questions/488717/detecting-if-a-program-is-already-installed-with-nsis http://nsis.sourceforge.net/Add_uninstall_information_to_Add/Remove_Programs My questions are little more in depth and little more general. So, as you understood my problem is that I want to check if "Certain Applications" are already installed on the user's machine? I'm generating the installer using Advanced Installer. First few questions: What is Upgrade Code? Advanced installer has option, Product Version (identify by Upgrade Code) What is Product Code? Advanced installer Product Version (identify by Product Code) Component is installed : GUID. What is GUID? All the above three has values like this: {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} I don't know what these values are but it seems that computer is recognizing software using this kind of strange ID. My required applications are MySQL DBMS MySQL .NET Connector One fact that I discovered is Upgrade Code & Product Code can be extracted from its "msi installer". MySQL Server Installer = mysql-5.1.43-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {0ECED7D8-FF53-4DC9-958E-C2177F528DE4} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{0ECED7D8-FF53-4DC9-958E-C2177F528DE4} Installer = mysql-5.1.46-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {EA8FDE5A-2B33-4EDD-B7E7-8D179DF731A5} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{EA8FDE5A-2B33-4EDD-B7E7-8D179DF731A5} Installer = mysql-essential-5.1.46-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {AD33AF2C-6485-4106-B012-1D9CDC88A454} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{AD33AF2C-6485-4106-B012-1D9CDC88A454} Installer = mysql-essential-5.1.46-win32.msi Upgrade Code = {49EB7A6A-1CEF-4A1E-9E89-B9A4993963E3} Product Code = {9A4DA7EF-A7B9-4282-90AD-10976AA24E69} GUID (for component Installed) = ???? Uninstall Path = HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{9A4DA7EF-A7B9-4282-90AD-10976AA24E69} Observation from above data: UpgradeCode of a software is constant & is irrespective of its version. ProductCode is version specific & it is used by the MSI internally which is actually reasonable because. MSI allows applications of different versions to be installed side by side. I don't know how to find GUID. MySQL ADO .NET Driver Installer = mysql.data.5.2.5.msi Upgrade Code = --- Product Code = {5FD88490-011C-4DF1-B886-F298D955171B} GUID (for component Installed) = ???? Installer = mysql.data.6.2.2.msi Upgrade Code = --- Product Code = {5FD88490-011C-4DF1-B886-F298D955171B} GUID (for component Installed) = ???? UninstallPath =HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{5FD88490-011C-4DF1-B886-F298D955171B} Installer = mysql.data.6.2.3.msi Upgrade Code = --- Product Code = {5FD88490-011C-4DF1-B886-F298D955171B} GUID (for component Installed) = ???? Observations from above data: - surprisingly, it couldn't find UpgradeCode from installer of mysql.data.*.msi. I wonder why? This contradicts with my above observation. - ProductCode for all different versions is same here. This again contradicts my above observations. -I still don't know how to find GUID. Now, What exactly are these ProductCode & UpgradeCode & GUID. Which denotes what? Why are above observations contradicting? I don't care about versions. I don't want to depend on Application Name then how do I check if MySQL driver & MySQL ADO .NET. Does detection become simple if they are .NET assemblies? How to do then? I don't want to ship the assemblies with my deployed files.

    Read the article

  • Bundler doesn't want to install hpricot on Windows XP with Ruby 1.8.7

    - by Nick Gorbikoff
    Hello I develop on a Windows machine but deploy to Debian. Trying to use hpricot with Rails 3 app. I can get the gem to install using : gem install hpricot --platform=mswin32 But when I do this in the bundle file - it keeps throwing an error (I think it's trying to install the wrong version of hpricot (not windows specific) group :production do gem "hpricot", "0.8.3" end group :development, :test do gem "hpricot", "0.8.3", :platforms => [:mswin, :mingw] end This is from another question here on stackoverflow - but it's not working for me. Any ideas? P.S.: Windows XP sp3 with Ruby 1.8.7 with Rails 3.0.3 with bundler 1.0.7 EDIT Forgot to paste my error: bundle install Fetching source index for http://rubygems.org/ which: no sudo in (.;C:\Program Files\ImageMagick-6.6.5-Q16;C:\ruby\Ruby187\bin;C:\Program Files\ActiveState Komodo Edit 6\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\e\cmd;C:\Program Files\MySQL\MySQL Server 5.1\bin;C:\WINDOWS\system32\WindowsPowerShell\v1.0;c:\tools;C:\gnuwin32\bin;C:\tools\wkhtmltopdf;C:\Python31;C:\Program Files\TortoiseHg\;C:\Program Files\TortoiseGit\bin; c:\program files\videolan\vlc;C:\Program Files\SMPlayer\mplayer;C:\Program Files\Git\cmd;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Calibre2\;c:\ruby\jruby-1.5.5\bin;C:\Program Files\Common Files\Shoes\0.r1514\..) Using rake (0.8.7) Using abstract (1.0.0) Using activesupport (3.0.3) Using builder (2.1.2) Using i18n (0.4.2) Using activemodel (3.0.3) Using erubis (2.6.6) Using rack (1.2.1) Using rack-mount (0.6.13) Using rack-test (0.5.6) Using tzinfo (0.3.23) Using actionpack (3.0.3) Using mime-types (1.16) Using polyglot (0.3.1) Using treetop (1.4.9) Using mail (2.2.10) Using actionmailer (3.0.3) Using arel (2.0.4) Using activerecord (3.0.3) Using activeresource (3.0.3) Using bcrypt-ruby (2.1.4) Using bundler (1.0.7) Using cancan (1.5.0) Using haml (3.0.24) Using compass (0.10.6) Using warden (1.0.3) Using devise (1.1.5) Installing hpricot (0.8.3) Temporarily enhancing PATH to include DevKit... with native extensions C:/ruby/Ruby187/lib/ruby/site_ruby/1.8/rubygems/installer.rb:483:in `build_extensions': ERROR: Failed to build gem native extension. (Gem::Installer::ExtensionBuildError) C:/ruby/Ruby187/bin/ruby.exe extconf.rb checking for stdio.h... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=C:/ruby/Ruby187/bin/ruby Gem files will remain installed in C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/hpricot-0.8.3 for inspection. Results logged to C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/hpricot-0.8.3/ext/fast_xs/gem_make.out from C:/ruby/Ruby187/lib/ruby/site_ruby/1.8/rubygems/installer.rb:446:in `each' from C:/ruby/Ruby187/lib/ruby/site_ruby/1.8/rubygems/installer.rb:446:in `build_extensions' from C:/ruby/Ruby187/lib/ruby/site_ruby/1.8/rubygems/installer.rb:198:in `install' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/source.rb:95:in `install' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/installer.rb:55:in `run' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/spec_set.rb:12:in `each' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/spec_set.rb:12:in `each' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/installer.rb:44:in `run' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/installer.rb:8:in `install' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/cli.rb:225:in `install' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/vendor/thor/task.rb:22:in `send' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/vendor/thor/task.rb:22:in `run' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/vendor/thor/invocation.rb:118:in `invoke_task' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/vendor/thor.rb:246:in `dispatch' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/vendor/thor/base.rb:389:in `start' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/bin/bundle:13 from C:/ruby/Ruby187/bin/bundle:19:in `load' from C:/ruby/Ruby187/bin/bundle:19

    Read the article

  • Does boost::asio makes excessive small heap allocations or am I wrong?

    - by Poni
    #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { socket_.async_read_some(boost::asio::buffer(data_, max_length - 1), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { if (!error) { data_[bytes_transferred] = '\0'; if(NULL != strstr(data_, "quit")) { this->socket().shutdown(boost::asio::ip::tcp::socket::shutdown_both); this->socket().close(); // how to make this dispatch "handle_read()" with a "disconnected" flag? } else { boost::asio::async_write(socket_, boost::asio::buffer(data_, bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); socket_.async_read_some(boost::asio::buffer(data_, max_length - 1), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } } else { delete this; } } void handle_write(const boost::system::error_code& error) { if (!error) { // } else { delete this; } } private: tcp::socket socket_; enum { max_length = 1024 }; char data_[max_length]; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } While experimenting with boost::asio I've noticed that within the calls to async_write()/async_read_some() there is a usage of the C++ "new" keyword. Also, when stressing this echo server with a client (1 connection) that sends for example 100,000 times some data, the memory usage of this program is getting higher and higher. What's going on? Will it allocate memory for every call? Or am I wrong? Asking because it doesn't seem right that a server app will allocate, anything. Can I handle it, say with a memory pool? Another side-question: See the "this-socket().close();" ? I want it, as the comment right to it says, to dispatch that same function one last time, with a disconnection error. Need that to do some clean-up. How do I do that? Thank you all gurus (:

    Read the article

  • WPF Storyboard issue

    - by Vinjamuri
    In the following template, the button is displayed with Normal image when the application is started, but when the mouse is over, the button doesn't get changed to mouse over image. Appreciate your help!!! I want some solution without major changes in the design. <Style TargetType="{x:Type local:ButtonControl}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type local:ButtonControl}"> <Grid> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="CommonStates"> <VisualState x:Name="Normal"> <Storyboard> <DoubleAnimation Duration="00:00:00.20" Storyboard.TargetName="imgNormal" Storyboard.TargetProperty="Opacity" To="1" /> </Storyboard> </VisualState> <VisualState x:Name="MouseOver"> <Storyboard> <DoubleAnimation Duration="00:00:00.20" Storyboard.TargetName="imgNormal" Storyboard.TargetProperty="Opacity" To="0" /> <DoubleAnimation Duration="00:00:00.20" Storyboard.TargetName="imgOver" Storyboard.TargetProperty="Opacity" To="1" /> </Storyboard> </VisualState> <VisualState x:Name="Disabled"> <Storyboard> <DoubleAnimation Duration="00:00:00.20" Storyboard.TargetName="imgDisable" Storyboard.TargetProperty="Opacity" To="1" /> </Storyboard> </VisualState> <VisualState x:Name="Pressed"> <Storyboard> <DoubleAnimation Duration="00:00:00.20" Storyboard.TargetName="imgPress" Storyboard.TargetProperty="Opacity" To="1" /> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <Grid> <Border x:Name="imgNormal"> <Image Source="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=NormalImage}" Opacity="1" Stretch="UniformToFill"/> </Border> </Grid> <Grid> <Border x:Name="imgOver"> <Image Source="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=MouseOverImage}" Opacity="0" Stretch="UniformToFill"/> </Border> </Grid> <Grid> <Border x:Name="imgDisable"> <Image Source="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=DisableImage}" Opacity="0" Stretch="UniformToFill"/> </Border> </Grid> <Grid> <Border x:Name="imgPress"> <Image Source="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=MousePressImage}" Opacity="0" Stretch="UniformToFill"/> </Border> </Grid> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style>

    Read the article

  • Dynamic Scoped Resources in WPF/XAML?

    - by firoso
    I have 2 Xaml files, one containing a DataTemplate which has a resource definition for an Image brush, and the other containing a content control which presents this DataTemplate. The data template is bound to a view model class. Everything seems to work EXCEPT the ImageBrush resource, which just shows up white... Any ideas? File 1: DataTemplate for ViewModel <ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:vm="clr-namespace:SEL.MfgTestDev.ESS.ViewModel" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d"> <DataTemplate DataType="{x:Type vm:PresenterViewModel}"> <DataTemplate.Resources> <ImageBrush x:Key="PresenterTitleBarFillBrush" TileMode="Tile" Viewbox="{Binding Path=FillBrushDimensions, Mode=Default}" ViewboxUnits="Absolute" Viewport="{Binding Path=FillBrushPatternSize, Mode=Default}" ViewportUnits="Absolute" ImageSource="{Binding Path=FillImage, Mode=Default}"/> </DataTemplate.Resources> <Grid d:DesignWidth="1440" d:DesignHeight="900"> <Grid.ColumnDefinitions> <ColumnDefinition Width="*"/> <ColumnDefinition Width="192"/> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="120"/> <RowDefinition Height="*"/> </Grid.RowDefinitions> <DockPanel HorizontalAlignment="Stretch" Width="Auto" LastChildFill="True" Background="{x:Null}" Grid.ColumnSpan="2"> <Image Source="{Binding Path=ImageSource, Mode=Default}"/> <Rectangle Fill="{DynamicResource PresenterTitleBarFillBrush}"/> </DockPanel> </Grid> </DataTemplate> </ResourceDictionary> File 2: Main Window Class which instanciates the DataTemplate Via it's view model. <Window x:Class="SEL.MfgTestDev.ESS.ESSMainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:vm="clr-namespace:SEL.MfgTestDev.ESS.ViewModel" Title="ESS Control Window" Height="900" Width="1440" WindowState="Maximized" WindowStyle="None" ResizeMode="NoResize" DataContext="{Binding}"> <Window.Resources> <ResourceDictionary Source="PresenterViewModel.xaml" /> </Window.Resources> <ContentControl> <ContentControl.Content> <vm:PresenterViewModel ImageSource="XAMLResources\SEL25YearsTitleBar.bmp" FillImage="XAMLResources\SEL25YearsFillPattern.bmp" FillBrushDimensions="0,0,5,110" FillBrushPatternSize="0,0,5,120"/> </ContentControl.Content> </ContentControl> </Window> And for the sake of completeness! The CodeBehind for the View Model using System; using System.Collections.Generic; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Shapes; namespace SEL.MfgTestDev.ESS.ViewModel { public class PresenterViewModel : ViewModelBase { public PresenterViewModel() { } //DataBindings private ImageSource _imageSource; public ImageSource ImageSource { get { return _imageSource; } set { if (_imageSource != value) { _imageSource = value; OnPropertyChanged("ImageSource"); } } } private Rect _fillBrushPatternSize; public Rect FillBrushPatternSize { get { return _fillBrushPatternSize; } set { if (_fillBrushPatternSize != value) { _fillBrushPatternSize = value; OnPropertyChanged("FillBrushPatternSize"); } } } private Rect _fillBrushDimensions; public Rect FillBrushDimensions { get { return _fillBrushDimensions; } set { if (_fillBrushDimensions != value) { _fillBrushDimensions = value; OnPropertyChanged("FillBrushDimensions"); } } } private ImageSource _fillImage; public ImageSource FillImage { get { return _fillImage; } set { if (_fillImage != value) { _fillImage = value; OnPropertyChanged("FillImage"); } } } } }

    Read the article

  • Update twitter profile image using OAuth

    - by sjobe
    I'm trying to get twitter update_profile_image to work using OAuth. I was using curl with regular authentication and everything was working fine, but I switched to OAuth using this library, and now everything except update_profile_image works. I read something about twitter OAuth having problems with multipart data, but that was a while ago and the plugin is supposed to have dealt with that issue. My working regular authentication with curl code $url = 'http://api.twitter.com/1/account/update_profile_image.xml'; $uname = $_POST['username']; $pword = $_POST['password']; $img_path = 'xxx'; $userpwd = $uname . ':' . $pword; $img_post = array('image' => '@' . $img_path . ';type=image/jpeg', 'tile' => 'true'); $format = 'xml'; //alternative: json $message = 'Test update with a random num'.rand(); $opts = array(CURLOPT_URL => $url, CURLOPT_FOLLOWLOCATION => true, CURLOPT_RETURNTRANSFER => true, CURLOPT_HEADER => true, CURLOPT_POST => true, CURLOPT_POSTFIELDS => $img_post, CURLOPT_HTTPAUTH => CURLAUTH_ANY, CURLOPT_USERPWD => $userpwd, CURLOPT_HTTPHEADER => array('Expect:'), CURLINFO_HEADER_OUT => true); $ch = curl_init(); curl_setopt_array($ch, $opts); $response = curl_exec($ch); $err = curl_error($ch); $info = curl_getinfo($ch); curl_close($ch); My current OAuth code [I had to cut it down, so do not minor look for syntax errors] include 'EpiCurl.php'; include 'EpiOAuth.php'; include 'EpiTwitter.php'; include 'secret.php'; $twitterObj = new EpiTwitter($consumer_key, $consumer_secret); $twitterObj->setToken($_GET['oauth_token']); $token = $twitterObj->getAccessToken(); $twitterObj->setToken($token->oauth_token, $token->oauth_token_secret); try{ $img_path = 'xxx'; //$twitterObj->post_accountUpdate_profile_image(array('@image' => "@".$img_path)); $twitterObj->post('/account/update_profile_image.json', array('@image' => "@".$img_path)); $twitterObj->post_statusesUpdate(array('status' => 'This is my new status:'.rand())); //This works $twitterInfo= $twitterObj->get_accountVerify_credentials(); echo $twitterInfo->responseText; }catch(Exception $e){ echo $e->getMessage(); } I've been trying to figure this out for a while, ANY help would be greatly appreciated. I'm not in any way tied to this library, so feel free to recommend others.

    Read the article

  • HTTP error code 405: tomcat Url mapping issue

    - by Andrew
    I am having trouble POSTing to my java HTTPServlet. I am getting "HTTP Status 405 - HTTP method GET is not supported by this URL" from my tomcat server". When I debug the servlet the login method is never called. I think it's a url mapping issue within tomcat... web.xml <servlet-mapping> <servlet-name>faxcom</servlet-name> <url-pattern>/faxcom/*</url-pattern> </servlet-mapping> FaxcomService.java @Path("/rest") public class FaxcomService extends HttpServlet{ private FAXCOM_x0020_ServiceLocator service; private FAXCOM_x0020_ServiceSoap port; @GET @Produces("application/json") public String testGet() { return "{ \"got here\":true }"; } @POST @Path("/login") @Consumes("application/json") // @Produces("application/json") public Response login(LoginBean login) { ArrayList<ResultMessageBean> rm = new ArrayList<ResultMessageBean>(10); try { service = new FAXCOM_x0020_ServiceLocator(); service.setFAXCOM_x0020_ServiceSoapEndpointAddress("http://cd-faxserver/faxcom_ws/faxcomservice.asmx"); service.setMaintainSession(true); // enable sessions support port = service.getFAXCOM_x0020_ServiceSoap(); rm.add(new ResultMessageBean(port.logOn( "\\\\CD-Faxserver\\FaxcomQ_API", /* path to the queue */ login.getUserName(), /* username */ login.getPassword(), /* password */ login.getUserType() /* 2 = user conf user */ ))); } catch (RemoteException e) { e.printStackTrace(); } catch (ServiceException e) { e.printStackTrace(); } // return rm; return Response.status(201).entity(rm).build(); } @POST @Path("/newFaxMessage") @Consumes(MediaType.APPLICATION_JSON) @Produces(MediaType.APPLICATION_JSON) public ArrayList<ResultMessageBean> newFaxMessage(FaxBean fax) { ArrayList<ResultMessageBean> rm = new ArrayList<ResultMessageBean>(); try { rm.add(new ResultMessageBean(port.newFaxMessage( fax.getPriority(), /* priority: 0 - low, 1 - normal, 2 - high, 3 - urgent */ fax.getSendTime(), /* send time */ /* "0.0" - immediate */ /* "1.0" - offpeak */ /* "9/14/2007 5:12:11 PM" - to set specific time */ fax.getResolution(), /* resolution: 0 - low res, 1 - high res */ fax.getSubject(), /* subject */ fax.getCoverpage(), /* cover page: "" – default, “(none)� – no cover page */ fax.getMemo(), /* memo */ fax.getSenderName(), /* sender's name */ fax.getSenderFaxNumber(), /* sender's fax */ fax.getRecipients().get(0).getName(), /* recipient's name */ fax.getRecipients().get(0).getCompany(), /* recipient's company */ fax.getRecipients().get(0).getFaxNumber(), /* destination fax number */ fax.getRecipients().get(0).getVoiceNumber(), /* recipient's phone number */ fax.getRecipients().get(0).getAccountNumber() /* recipient's account number */ ))); if (fax.getRecipients().size() > 1) { for (int i = 1; i < fax.getRecipients().size(); i++) rm.addAll(addRecipient(fax.getRecipients().get(i))); } } catch (RemoteException e) { // TODO Auto-generated catch block e.printStackTrace(); } return rm; } } Main.java private static void main(String[] args) { try { URL url = new URL("https://andrew-vm/faxcom/rest/login"); HttpURLConnection conn = (HttpURLConnection) url.openConnection(); conn.setRequestMethod("POST"); conn.setDoOutput(true); conn.setRequestProperty("Content-Type", "application/json"); FileInputStream jsonDemo = new FileInputStream("login.txt"); OutputStream os = (OutputStream) conn.getOutputStream(); os.write(IOUtils.toByteArray(jsonDemo)); os.flush(); if (conn.getResponseCode() != 200) { throw new RuntimeException("Failed : HTTP error code : " + conn.getResponseCode()); } BufferedReader br = new BufferedReader(new InputStreamReader( (conn.getInputStream()))); String output; System.out.println("Output from Server .... \n"); while ((output = br.readLine()) != null) { System.out.println(output); } // Don't want to disconnect - servletInstance will be destroyed // conn.disconnect(); } catch (MalformedURLException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } } I am working from this tutorial: http://www.mkyong.com/webservices/jax-rs/restfull-java-client-with-java-net-url/

    Read the article

< Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >