Search Results

Search found 11482 results on 460 pages for 'portable device'.

Page 295/460 | < Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >

  • Win7 playback of dvr-ms files stutters

    - by Jim Lynn
    I've just had to install Windows 7 on my Media Center machine because my Vista installation had a faulty drive. I've got the latest drivers that I can find - Intel 945GM integrated Graphics, Realtek audio drivers. Things are working OK with one exception. Playback of old recordings, from dvr-ms format files, is choppy. The picture freezes for a fraction of a second, then quickly catches up. The sound is uninterrupted and doesn't pause. These freezes happen once every 5 seconds or so. It's very regular. Playback of Live TV from the digital tuner is perfectly smooth. DVD playback is perfectly smooth. As an experiment, I used the MPEG editing package VideoReDo to create a small test file in three different formats. This program takes the raw MPEG streams and repackages them into the desired container. I took the same clip and created three files in three formats: dvr-ms (Microsoft's old recorded TV format); mpg (standard MPEG); and ts (raw MPEG transport stream of the kind often produced by PVRs). When these three files are played back under Windows 7, the mpg and ts files play smoothly, but the dvr-ms file stutters. The last piece of data I have is that two other Windows 7 machines can play back dvr-ms files smoothly with no stuttering. One is a netbook, with less grunt than the media centre. So there must be something specific about my Media Center machine that's causing the problem. Does anyone have any idea where I can look now? I don't know much about AV software, codecs, filter graphs etc. but I suspect that's where the problem lies. Rendering the video isn't the problem, but extracting the streams is. How would I go about diagnosing the problem? Edited to add: I just used the GraphStudio tool to look at the filter graph on the offending PC. The filter graph it uses by default for dvr-ms looks identical to the other machines, and, interestingly, when I play the files using GraphStudio they run smoothly. Under Windows Media Player and Windows Media Center they stutter. I'd like to see the filter graph for WMP but GraphStudio won't show it. It looks like WMP and WMC are using a different decoding path to GraphStudio. Edited again to add: Today I purchased a new HDTV. The same Media Center driving the TV at 1080p is now playing back the old Recorded TV files smoothly, without stuttering. So whatever the cause of the original problem, using a different resolution seems to have removed the problem. It might also explain why nobody else has had this problem. I doubt many people use Media Centre with a 14in portable TV.

    Read the article

  • Windows 2003 VM, not connecting to VM Network

    - by TheWellington
    I am running VMware's vSphere infrastructure. I have a windows 2003 VM that is suddenly not connected to the network. I can log into vSphere and see that the VM is running, but it does not connect to the VM network. The firewall on this VM is not running. The network adapter in the VM is configured correctly. The only evidence I see indicating an issue is in the event viewer. I have the following entry. Source: VMUpgradeHelper EventID: 270 Description: Not restoring network configuration for adapter with MAC address 00:50:56:xx:xx:xx. The device ID for this adapter is unchanged. THis VM is a webserver, and it was working beautifully just two days ago. "nothing" has happened... so I am at a loss as to what may have happened. Ideas??

    Read the article

  • using RHEL5 as a router

    - by gopikrishna7779
    Dear Sir, I am planning to use a RHEL5 installed computer as a internet connection sharing device. I mean I want to share the internet connection through it I have installed 2 Lan cards in it eth0 and eth1 eth0 Internet eth1 LAN eth0 configuration as follows ; Ipaddress : 115.252.64.187 Subnet : 255.255.255.240 Gateway : 115.252.64.177 I wrote the following entries in Vim /etc/resolv.conf nameserver 202.138.96.2 (preferred DNS Server) nameserver 202.138.103.2 (secondary DNS server) :q! then eth1 ipaddress : 192.168.1.1 subnet : 255.255.255.0 gateway : 192.168.1.1 (I am confused which gateway I need to use in the above scenario) I am unable to ping to my lan and I am able to connect to the Internet. Please let me know the sollution for this. Thanks in advance. regards, G.Gopi Krishna

    Read the article

  • Why does my ReadyNas 4200 have a constant beep post disk failure

    - by swagner88
    Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

    Read the article

  • Enabling media streaming from a removable drive using Windows Media Player

    - by Simon Hartcher
    I have Windows Media Player set up to stream video to several devices in my apartment. I had recently run out of space so I purchased an external drive to store my videos/music etc. I can add the media to my WMP library and play it locally without issue. As soon as I try to access the media from another device that supports media streaming (Media player or another PC) only the media stored on a fixed drive is available. Is there a way to enable media sharing from a removable drive or somehow trick WMP that the media is stored on a fixed drive? I tried setting up a SymLink linking a directory on the fixed drive to the removable one but with the same result.

    Read the article

  • Is there a good dual monitor arm solution for iMac 27" i7s?

    - by Darren Newton
    I currently have an iMac 27" and am considering purchasing another to run in target display mode. My desk space is a little limited. Is there a dual monitor arm solution that can support the weight of two iMac 27" units (30.5 pounds (13.8 kg)) as well as their width (25.6 inches (65.0 cm)) in a side-by-side landscape configuration? I looked at the Ergotron LX Dual Side by Side but the iMacs appear to exceed the width and weight limit this device is rated for. I'm open to alternate solutions to arms, such as a multi-unit desk stand/mount, but a wall mount is not possible for me at this time. Thanks!

    Read the article

  • Windows Cannot Boot - 0xc0000225

    - by B__
    I've had Windows 7 installed for months on my Thinkpad T60 laptop and today out of the blue when I tried to boot, it started the Windows loading screen and immediately I got this error: Status: 0xc0000225 Info: The boot selection failed because a required device is inaccessible. Through some research, I see people get this problem when a repartitioning goes wrong or there's a problem with their dual boot. I'm not dual booting my machine and I haven't messed with my partitions since I installed the OS. This error is truly out of the blue. I've run memory diagnostics from a Windows boot disc and hard drive diagnostics from my BIOS and neither found a problem. I don't have any backups to restore from so I'm hoping to find a fix for this. Anyone seen this kind of thing before? Thanks

    Read the article

  • Network Scanning: HP Laserjet 2840 & Windows 7 (+ Linux?)

    - by Eddie Parker
    I own a HP Laserjet 2840 multifunction printer. It's a fabulous device, but on Windows 7 it can't network scan. HP doesn't seem to support it in anything greater than Vista, and they aren't forth coming with solutions. I'm curious if anyone else has gotten work arounds to this problem. One possible avenue for me is that I have an always-on Gentoo server that is configured to see the printer as a fax and printer using hplip. I have this shared via samba and I can print just fine through samba. Is there a similar way I can do network scanning? Anyone know of where I start looking for this?

    Read the article

  • UNR Installation: Partitioning Error

    - by Wesley
    Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I'm trying to install Ubuntu Netbook Remix, but when I set my partitions, I get an error. The setup I want right now is: Recovery Partition - 6 GB Windows XP Home Partition - 40 GB General Partition - remaining space UNR Partition - 40 GB I am told that I need to resize a partition and it will take a while. However, when it nearly starts, I get an ERROR!!! dialog that says, "Error informing the kernel about modifications to partition /dev/sda5 - Device or resource busy. This means Linux won't know about any changes you made to /dev/sda5 so you shouldn't mount it or use it in any way before rebooting." I'm not too sure what I should do right now... any ideas? Thanks in advance.

    Read the article

  • Getting a list of patches in an HPSA patch policy

    - by asm
    I'm trying to get a list of patches contained in a Patch Policy in HPSA -- I can get what I need via the Twister web interface (under PatchPolicy.getPatches(), give it an ID, and it happily returns a list of patches contained.) -- I'm having a hard time getting this to work via the Pytwist interface, though... I haven't used the Pytwist interface for much besides some very basic Device manipulation, and Python is.. not my forte. I create the TwistServer object, then a PatchPolicy object from that (which I think is working..), but can't figure out how/where to call the getPatches() method from in Python-land. If there's a way to dig this out of the database itself, that would work, too, but I can't seem to find much in there along these lines besides the vendor-recommended patching stuff, and we use custom policies.

    Read the article

  • 8Gb Fiber Channcel HBA vs. 10 Gb SPF+ Converged HBA

    - by Hossein Aarabi
    I am putting a Dell server together, more specifically R720. I have to select the correct Host Bus Adapter. This HBA on R710 will connect to a storage device. I am confused between these two: QLogic 2562, Dual Port 8Gb Optical Fiber Channel HBA (price $2,045) QLogic 8262, Dual Port 10Gb SFP+, Converged Network Adapter (price $1,618) I thought since the QLogic 2562 is a fiber channel and is more expensive then it is faster in terms of IOPS. But, it is a 8Gb as opposed to 10 Gb of SFP+. My questions: Which one is better (IOPS performance, etc.)? Why should I choose one over another?

    Read the article

  • read and write permission for FAT32 partition in Ubuntu

    - by Dean
    This is a strange problem. I have the following partition table Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 5737 45978624 7 HPFS/NTFS /dev/sda3 5738 10600 39062047+ 83 Linux /dev/sda4 10601 19457 71143852+ 5 Extended /dev/sda5 10601 11208 4883728+ 82 Linux swap / Solaris /dev/sda6 11209 15033 30720000 b W95 FAT32 /dev/sda7 15033 19457 35537920 7 HPFS/NTFS I dual boot Win7 (sda2) and Ubuntu (sda3) and wanted to use the FAT23 partition to share files across two OS's. I followed some online tutorial and have done these: sudo mkdir /media/FAT32 sudo chmod 777 /media/FAT32 sudo mount /dev/sda6/ /media/FAT32 after I mounted the file, I can only read but not be able to write to it. I checked the file permission, it becomes: drwxr-xr-x but after I unmounted the it then becomes drwxrwxrwx and I can read and write to it. very strange. I don't know where I've down wrong. Cheers.

    Read the article

  • Sony VAIO TZ2 internal camera and Windows XP

    - by user34300
    I have a Sony Vaio TZ2 laptop here and I'm trying to install Windows XP SP3 on it. Everything works fine except of the integrated camera which is supposed to be a USB device but is absent in the Devoice Manager. I've read that it is important in what order you install drivers when you downgrade this Vista preinstalled model to Windows XP so I repeated once again the installation with the correct order by still had no luck with the camera. Can someone give me an advice on how to woke up this camera? Thanks!

    Read the article

  • Make bootable iso with grub chainloading

    - by hlovdal
    My parents' pc has windows 7's boot manager installed at MBR and grub2 is installed on /dev/sda2 (booting linux on /dev/sda2). I want to make a bootable cd so that when booted from it just chainloads into the boot manager on the second partition. I assume using grub rather than grub2 for this will be simpler, using the configuration timeout=0 hiddenmenu default=0 title grub2 (/dev/sda2) rootnoverify (hd0,1) chainloader (hd0,1)+1 I know I can make a bootable linux cd in various ways, but that is not what I want. I just want to put grub/grub2 on the cd, no kernels or programs. The question is how do I make the iso file? I have found some references to installing on a floppy or usb disk, but all those assume the device is present when running the grub install commands. A iso file is different.

    Read the article

  • howto copy files on esxi datastore using scp?

    - by maruti
    how to copy files on esxi4 datastore (fs=vmfs) over network using console (SSH)? giving up older question:have seen on vmware forums that its not possible have a USB drive NTFS attached to ESXi4 host. fdisk -l shows the device as /dev/mpx.... but when i try to mount that using mount /dev/xxx /mnt/usbdisk....it fails with message "no such file or dir" could anyone help with correct entry in etc/fstab? all that i am trying to do is backup the vms on esxi host to usb disk...thanks in advance there is a dir called usbdrv, tried cp of vmdk file here but failed

    Read the article

  • Windows Ce 6.0 loses Windows credentials when viewing a web site that's running on Windows 2008 server

    - by gnomixa
    When a user views a web page (with integrated Windows authentication) on WindowsCE 6.0 device, the authentication is lost sporadically. The page being viewed is running on Windows 2008 server. We never had the same issue with Windows 2003 server. The credentials were being asked once and cached for a certain time. My question is: has anything changed in Windows 2008 that doesn't pass the credentials the same way to WindowsCE? The only variable in this scenario is the web server OS - Windows 2003 vs WIndows 2008. Any help would be appreciated, thanks!

    Read the article

  • ndiswrapper wlan driver installed, but wlan still does not work

    - by mugetsu
    I'm trying to get my Atheros AR1111 EB-WG PCI wireless adapter to work. Right now wifi is not even detected. I'm on ubuntu 12.04 64bit and I managed to find a xp64bit driver. I followed the exact steps here: https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper And where I do ndiswrapper -l I get something like : {name of driver} : driver installed device ({Chipset ID}) present which shows that the driver installed properly However, after I load the new module : sudo modprobe ndiswrapper nothing happens, and iwconfig shows that I still have no wlan. I tried to do dmseg | grep ndiswrapper, but there were no driver loading errors or anything strange. I also have blacklist ath5k, ath8k in /etc/modprobe.d/blacklist.conf What am I doing wrong? What could be causing this?

    Read the article

  • Can't create VM with virt-install on Debian wheezy

    - by chrismacp
    Cant find any answers anywhere so here goes. I am trying to CREATE a new virtual machine using the virt-install command from a console on a Debian wheezy install. I keep getting the following output: Starting install... ERROR internal error process exited while connecting to monitor: char device redirected to /dev/pts/1 inet_listen_opts: bind(ipv4,127.0.0.1,5951): Cannot assign requested address inet_listen_opts: FAILED I assumed that the port (5951 in this case) was being used judging by the error message and other sites I visited for an answer, but the same error occurs whatever number I use for the port. I cant see that port being listened upon in netstat either. Anyone have any ideas what may be wrong?

    Read the article

  • Route additional network through Sonicwall site-to-site VPN

    - by Brandon
    I have a sonicwall site to site vpn. At one of the sites there is another Cisco vpn to another site. I need to route the traffic for the cisco vpn through the site to site from the other sonicwall site. Site A - 10.10.0.0 /16 network Site B - 192.168.1.0 /24 Sonicwall, A cisco vpn is on 192.168.1.226 address and has routes the 10.10.0.0 network to Site A. Site C - 192.168.2.0 /24 Sonicwall Site A-B VPN is working Site B-C VPN is working I need to get Site C to transmit the 10.10.0.0 traffic over the VPN to site B and then out the Cisco device.

    Read the article

  • Setting up Lan within a Lan

    - by nageeb
    How unreasonable would it be to setup a small LAN within an existing LAN? I'm setting up a series of video surveillance servers and a number of IP cameras in a client's location and cannot have my equipment on the same network as their local machines. My network is essentially self-contained and the only device that anyone needs to access is a web-app on one of the machines. Basically I'm thinking of installing a SOHO router which would uplink to their LAN, and then set up some NAT rules on both their router and my router, to allow outside access to the webserver. Is there anything fundamental that i'm missing which would prevent this from working?

    Read the article

  • Migrating from DD-WRT to Tomato

    - by Collin Allen
    Is it possible to switch to the latest version of Tomato on a router that's already running DD-WRT? Using the default Linksys firmware on my WRT54GL v1.1, I had to upload a micro version of DD-WRT first. I imagine that, since I'm now running third-party firmware, I won't have to do that again to make the switch, but I thought I should check so as not to brick it. This router is taking a back seat to a new AirPort Extreme (for the 'n' capability), but I still want to have the soon-to-be-Tomato device sit between the AirPort Extreme and my modem for the superior traffic graphing.

    Read the article

  • Linux Kernel Messages: ata1.00: status: { DRDY ERR }

    - by PM
    I am receiving a lot of these messages. Is my HD going to die tomorrow morning? ata1: link is slow to respond, please be patient (ready=0) ata1: device not ready (errno=-16), forcing hardreset ata1: soft resetting link ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: qc timeout (cmd 0xa0) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)

    Read the article

  • What happens when the USB key or SD card I've installed VMware ESXi on fails?

    - by ewwhite
    An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed. I encountered some rather ominous looking messages on the vCenter console and in the HP ProLiant ILO event log... Lost connectivity to the device ... backing the boot filesystem. As a result, host configuration changes will not be saved to persistent storage. Embedded Flash/SD-CARD: Error writing media 0, physical block 848880: Stack Exception. VMware advocates the use of USB and SD (SDHC) boot devices for ESXi. It was one of the main reasons the smaller footprint ESXi was developed (versus the older ESX). I've spent much time highlighting the differences between ESXi's installable and embedded modes to coworkers and clients. However, these failures do seem to happen. In this case, this is my third instance. Luckily, this is a vSphere cluster with SAN storage. What steps should be taken to remediate this failure?

    Read the article

  • Redundancy and Automated failover using Forefront TMG 2010 Standard between Production-DR site ?

    - by Albert Widjaja
    Hi, I'm using MS TMG 2010 Standard as my single firewall to publish my Exchange Server and IIS website to the internet, however it is just one VM in the DMZ network with just one network card (vNIC), what sort of redundancy method that is suitable for making this firewall VM redundant / automatically failover in my DR site ? Because it is very important in the event of disaster recovery all important email through various mobile device will still need to operate and it is impossible if this TMG 2010 VM is offline. is it by using: 1. Multicast NLB 2. Any other clustering 3. VMware HA / FT (one VM in production, the other VM in DR site with different subnet ?) Any suggestion and idea willl be appreciated. Thanks

    Read the article

  • Booting From VIA VT6421A Based PCI SATA Card

    - by Priyan R
    I bought a VIA VT6421A based SATA card for an 845 chipset based motherboard. The card is working i can access sata hdd from windows/linux. The problem is i can't directly boot from the sata card. My motherboard is award bios 6 based. I tried first boot as SCSI, its not worked. There is no Raid Bios screen appeared from the card. On searching i found , Add VT6421A bios to system bios as pci addon bios. I did it using cbrom6 , successfully added VT6421A bios to the existing bios. But now on booting instead of raid bios system bios showed Warning : something like cannot load add on rom for vendor id xxxx device id xxx . Whats wrong ? As the card is VT6421A based and i added VT6421A bios got from VIA website.

    Read the article

< Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >