Search Results

Search found 9409 results on 377 pages for 'boot loader'.

Page 296/377 | < Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >

  • Does the advanced format tool bundled by manufacturers actually do anything which mkntfs doesn't?

    - by neurolysis
    I recently bought a new drive (specifically, a 2TB Samsung Spinpoint) that says on the label that it supports advanced format, and that I should download the tool from their site. Unless I'm missing something, mkntfs has always had its maximum sector size at 4096b: -s, --sector-size BYTES Specify the size of sectors in bytes. Valid sector size values are 256, 512, 1024, 2048 and 4096 bytes per sector. If omitted, mkntfs attempts to determine the sector-size automatically and if that fails a default of 512 bytes per sector is used. Will this tool on Samsung's site do anything other than format the drive in the same way doing mkntfs -s 4K /dev/sdb1 would do? To be specific, I'm intending to use this drive on a machine that will primarily run Windows XP, but I'd rather boot into Linux/BSD and format the disk manually than have bloated software. I do want to have the new AF style sectors though -- that's essential. So if I did the command above, would it have exactly the same effect as using the advanced format tool?

    Read the article

  • Why is the latency on one LVM volume consistently higher?

    - by David Schmitt
    I've got a server with LVM over RAID1. One of the volumes has a consistently higher IO latency (as measured by the diskstats_latency munin plugin) than the other volumes from the same group. As you can see, the dark orange /root volume has consistently high IO latency. Actually ten times the average latency of the physical devices. It also has the highest Min and Max values. My main concern are not the peaks, which occur under high load, but the constant load on (semi-)idle. The server is running Debian Squeeze with the VServer kernel and has four VServer containers and one KVM guest. I'm looking for ways to fix - or at least understand - this situation. Here're some parts of the system configuration: root@kvmhost2:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system--host-root 19G 3.8G 14G 22% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 224K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/md0 942M 37M 858M 5% /boot /dev/mapper/system--host-isos 28G 19G 8.1G 70% /srv/isos /dev/mapper/system--host-vs_a 30G 23G 6.0G 79% /var/lib/vservers/a /dev/mapper/system--host-vs_b 5.0G 594M 4.1G 13% /var/lib/vservers/b /dev/mapper/system--host-vs_c 5.0G 555M 4.2G 12% /var/lib/vservers/c /dev/loop0 4.4G 4.4G 0 100% /media/debian-6.0.0-amd64-DVD-1 /dev/loop1 4.4G 4.4G 0 100% /media/debian-6.0.0-i386-DVD-1 /dev/mapper/system--host-vs_d 74G 55G 16G 78% /var/lib/vservers/d root@kvmhost2:~# cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 none /dev devtmpfs rw,relatime,size=16500836k,nr_inodes=4125209,mode=755 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 /dev/mapper/system--host-root / ext3 rw,relatime,errors=remount-ro,data=ordered 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 /dev/md0 /boot ext3 rw,sync,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-isos /srv/isos ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_a /var/lib/vservers/a ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_b /var/lib/vservers/b ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_c /var/lib/vservers/c ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/loop0 /media/debian-6.0.0-amd64-DVD-1 iso9660 ro,relatime 0 0 /dev/loop1 /media/debian-6.0.0-i386-DVD-1 iso9660 ro,relatime 0 0 /dev/mapper/system--host-vs_d /var/lib/vservers/d ext3 rw,relatime,errors=continue,data=ordered 0 0 root@kvmhost2:~# cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sda2[0] sdb2[1] 975779968 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 979840 blocks [2/2] [UU] unused devices: <none> root@kvmhost2:~# iostat -x Linux 2.6.32-5-vserver-amd64 (kvmhost2) 06/28/2012 _x86_64_ (8 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 3.09 0.14 2.92 1.51 0.00 92.35 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 23.25 161.12 7.46 37.90 855.27 1596.62 54.05 0.13 2.80 1.76 8.00 sdb 22.82 161.36 7.36 37.66 850.29 1596.62 54.35 0.54 12.01 1.80 8.09 md0 0.00 0.00 0.00 0.00 0.14 0.02 38.44 0.00 0.00 0.00 0.00 md1 0.00 0.00 53.55 198.16 768.01 1585.25 9.35 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.48 20.21 16.70 161.71 8.62 0.26 12.72 0.77 1.60 dm-1 0.00 0.00 3.62 10.03 28.94 80.21 8.00 0.19 13.68 1.59 2.17 dm-2 0.00 0.00 0.00 0.00 0.00 0.00 9.17 0.00 9.64 6.42 0.00 dm-3 0.00 0.00 6.73 0.41 53.87 3.28 8.00 0.02 3.44 0.12 0.09 dm-4 0.00 0.00 17.45 18.18 139.57 145.47 8.00 0.42 11.81 0.76 2.69 dm-5 0.00 0.00 2.50 46.38 120.50 371.07 10.06 0.69 14.20 0.46 2.26 dm-6 0.00 0.00 0.02 0.10 0.67 0.81 12.53 0.01 75.53 18.58 0.22 dm-7 0.00 0.00 0.00 0.00 0.00 0.00 7.99 0.00 11.24 9.45 0.00 dm-8 0.00 0.00 22.69 102.76 407.25 822.09 9.80 0.97 7.71 0.39 4.95 dm-9 0.00 0.00 0.06 0.08 0.50 0.62 8.00 0.07 481.23 11.72 0.16 root@kvmhost2:~# ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 59 May 11 11:19 control lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm1 -> ../dm-4 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm2 -> ../dm-3 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-isos -> ../dm-2 lrwxrwxrwx 1 root root 7 May 11 11:19 system--host-root -> ../dm-0 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-swap -> ../dm-9 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_d -> ../dm-8 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_b -> ../dm-6 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_c -> ../dm-7 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_a -> ../dm-5 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm3 -> ../dm-1 root@kvmhost2:~#

    Read the article

  • Restore default ownership in CentOS after terrible chown

    - by tgm
    Is there any way to restore the default ownership of a CentOS filesystem after an accidental chown -R user:group /* ? Before I go and reinstall, I thought I'd ask and perhaps save some time. I'm in the process of setting up a new dev machine (thankfully not prod) and typed too fast or missed the . key or something. I tried to cancel as soon as I caught it but all my /bin /boot /dev etc had already been changed. Is there hope, or just reinstall and be happy it wasn't a production machine?

    Read the article

  • Netgear router-speed problem after XBox use

    - by John Dudley
    When my son is at my place at the weekend, he plays XBox Live over the internet, using my wireless network (Netgear 'g' type router). This usually thrashes & crashes the router to the extent I have to hard-boot it to get it working again. However, after this weekend, on my two laptops, I'm left with the problem that the router is working, but I'm only getting 0.38Mbps out of it, at all times of the day. I've tried hard-booting the router, but no difference. Could this be a knock-on effect of the Xbox use? I can't believe the router could be damaged, but working slower? Is that possible? Tiscali haven't come back to me yet on any 'network' issues. Thanks in advance

    Read the article

  • Dell Inspiron/Windows Vista sleep/hibernate issue

    - by sarge
    When I hit the sleep button in Windows the computer looks like it's going into Sleep mode but a few seconds later it's restarted, and stops with this error message: internal hard disk drive not found To resolve this issue, try to reseat the drive. No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics. The computer is running Windows Vista (SP2) and I have installed all available Windows Updates and the latest manufacturer drivers. I have already tried to reseated the drive, ran the onboard diagnostics and there were no errors. I have changed the power settings for all devices where it's available so that they are not allowed to wake up the computer. Any ideas?

    Read the article

  • Working bootable CD now suddenly freezes at starting point

    - by xolstice
    I have this strange problem with a bootable CD I created that uses floppy disk 1.44MB emulation. The PC originally worked with it just fine and booted from the CD several times from the prior occasions I used it. Now for some strange reason it decides to freeze at the point where it displays the following text on the screen and does not proceed further: Boot from ATAPI CD-ROM 1. FD 1.44MB System Type-(00) The other strange thing is that if I put in a Linux bootable installation CD, it boots that without any issues. Everytime I stick this custom made bootable CD in it pulls this freezing act. Has anyone experienced this or know how to correct the problem?

    Read the article

  • Windows 7 disc not recognized by DVD drive

    - by Ed Manet
    My machine is a recent model Systemax, less than 2 years old. It came with Vista 32bit and I bought Windows 7 Home Premium Upgrade for it. When I insert the Windows 7 DVD into the drive, it churns a little but does not recognize the disc. If I double click the DVD drive icon, it prompts me to insert a disc. I tried a different DVD (Office 2007) and the drive recognized the disc. I tried the Windows 7 disc in my Dell laptop and it recognized the disc. So basically, the disc is good and the drive is good, but they don't like each other. I tried to boot to the Windows 7 DVD and the system did not see it. I turned off the Lightscribe service and that didn't help. Does anybody have an idea what's wrong here? Thanks.

    Read the article

  • Computer randomly shuts down with a fading alarm power button and CD drive

    - by Shad
    I am currently experiencing something very very odd. Having build my PC myself, I have never had any issues (or anything heat related). A few moments ago my computer shut down very randomly and everything goes blank, when I looked down on my case's power button it was fading on and off in such way I've had never seen before. I noticed the CD drive all of a sudden also started blinking randomly. What do you guys think this problem is related to? It is definitely not a overheating issue and I am pretty sure my 600 watt power supply didn't blow because right now I am able to turn it on and boot up the PC but 20 seconds later it shuts down (sometimes doesn't shut down for 2 minutes). I have no idea what this is... My specs are (built by myself): i5 3570k (unoverclocked) GTX 560ti Asrock Z77 Pro4-M motherboard 8GB Vengeance RAM 600W Corsair power supply 500GB of Seagate HD Case: Corsair Carbide 300R

    Read the article

  • Is it a good idea to have the operating system on a solid state drive?

    - by Kenji Kina
    There is something I don't quite understand. I know a SSD helps with OS load times, but I'm not sure if all this boost is only noticeable/interesting when booting, or gives an all around considerably better experience thereafter. I am interested in having a quick and responsive environment after booting, which leads me to think that it'd be better to spend the SSD capacity in my most used apps (and the page file? Another inside question) and not the OS itself. This, of course, means that I don't know just how much the OS reads/writes its files during normal usage. So, how good an idea is it to dump the whole 20GB+ of Windows 7 OS into the SSD (considering the hefty price per GB of SSD capacity) if I can put up with the usual hard disk boot times? Would I be missing on a lot if I didn't?

    Read the article

  • Startup Disk Creator tool for Debian

    - by user61954
    I was trying to create a USB bootable in Debian to install my new system. I couldnt find any easy to use tool in Debian. I tried downloading the hybrid iso image from the Debian site and copied it to the USB using the dd command as said in Debian site. But it didnt boot. Next I used the Startup Disk Creator tool in Ubuntu and it worked like a charm. Is there any similar tool in Debian? I know that there is Unetbootin but its difficult to install

    Read the article

  • How do I disable alert beeps

    - by wheresrhys
    My HP pavilion laptop is getting pretty old and the speakers no longer work properly. So I've disabled all audio devices, including disabling the light-touch volume controls at boot-up. The one sound still here that I can't get rid of is teh alert beep whenever there's an error. It's annoying at the best of times, but when your laptop has no other sounds at all it's intensly irritating! Nothing I change in the windows settings or in the BIOS seems to have any effect. Any ideas how to switch them off?

    Read the article

  • CHKDSK always runs on Hyper-V image

    - by Dave
    I am having a problem with one of my VM's. Every time it boots, CHKDSK runs and finds no errors, but it goes into an endless loop (CHKDSK/Reboot/CHKDSK). The only way I can get Windows to boot is by cancelling the chkdsk. Is there any way I can tell windows to not do it? What do you guys suggest? Can't redo server. I guess it's also fair to say I get the following errors in Event Viewer "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2" "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:\" I only have 1 VHD attached, not sure what Volume 2 is. Thanks!

    Read the article

  • How do I disable aalert beeps

    - by wheresrhys
    My HP pavilion laptop is getting pretty old and the speakers no longer work properly. So I've disabled all audio devices, including disabling the light-touch volume controls at boot-up. The one sound still here that I can't get rid of is teh alert beep whenever there's an error. It's annoying at the best of times, but when your laptop has no other sounds at all it's intensly irritating! Nothing I chaneg in the windows settings or in the BIOS seems to have any effect. Any ideas how to switch them off?

    Read the article

  • Multiple interfaces to one IP address?

    - by Delan Azabani
    At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

    Read the article

  • How to set CHKDSK for drive C: in Windows 7

    - by prashanth
    I recently got a 0xc000007b error whenever I tried to run some application software. I found that CHKDSK for C drive might be a solution. When I tried to do it from C drive properties, it said the drive was in use and asked to schedule CHKDSK at the next reboot. I clicked OK. When I restart, I experience a BSOD. I waited for 10 minutes but still nothing happens. So I forced a shutdown (laptop) and again booted up the computer and got a BSOD for just 5 or 10 seconds and system boots and works with no problem. I repeated all these steps four or four times and yet with the same results. Is there any other way other than CHKDSK to solve the 0xc000007b error? If not, why is CHKDSK not working at boot up? Can I force CHKDSK on drive C: to perform while the system is on? Platform: Windows 7 64-bit.

    Read the article

  • iMac invalid memory access and then crash?

    - by Sam McAfee
    My iMac G5 from a few years ago (the square white one) dies now, with a message about an invalid memory access. It goes straight to an Open Firmware prompt and doesn't even load the Mac OS at all. Am I correct in guessing that the memory is probably the issue, and that if I replace it, we may be able to boot again as normal? That's my gut feeling anyway, so I ordered some more memory and plan to swap it today. Any thoughts? Ideas?

    Read the article

  • Win7 safe mode pretends it's Xp?

    - by Joachim Kerschbaumer
    hi there, just a question in between. a friend of mine brougth me a laptop that does not work anymore and wanted me to check whether i can do something. she told me its windows 7, and startup screen and login screen look like it. howevere, as she gets a bluescreen on startup it is only possible to boot in safe mode where the system pretends to be windows xp sp3. the system also may have 1 gig of ram but the system itself states that it has 954 mb of ram which is a value i´ve never seen before. is there everything corrupt from operating system to hardware, or am i just a newbie that does not know that windows 7 pretends to be winxp sp3 in safe mode? or is this laptop just the victim of an illegal, crazy copy of xp sold as win7? maybe some strange chinese stuff? i also recognized that the startup screen of Outlook Express is pronounced as "Outllok Express" (no typo) i´m kinda confused, maybe someone could put light into this ;) thanks

    Read the article

  • Why can't windows see mmcblk0p3? [closed]

    - by jacknad
    The partition is created on the embedded linux target like this # n - new # p - partition # 3 - partition 3 # 66 - starting cylinder # <blank> - maximum size for the ending cylinder # t - set file system type # 3 - partition 3 # c - set to windows vfat # w - write partition table and exit echo -e "n\np\n3\n66\n\nt\n3\nc\nw" | fdisk /dev/mmcblk0 The file system is then formatted on the embedded linux target as MS-DOS like this # -n volume-name # -F FAT-size mkfs.vfat -n DB -F 32 /dev/mmcblk0p3 A linux host can mount and access files in mmcblk0p3 without issue. Why can't windows? Edit: Although the default number of FATS is 2 I tried adding -f 2 [number-of-FATs] since this is actually being done by busybox on an embedded platform but this didn't help. I understand the Linux MS-DOS file system does not support more than 2 FATs but there are only 2 on this target (the boot is also FAT which is visible), along with and EXT3 (on p2) for the root file system.

    Read the article

  • strange behaviour - dhclient needs to be run twice in order to connect to wireless

    - by splicer
    I am trying to connect my to my wlan without the use of NetworkManager. I run the following commands after boot: iwconfig wlan0 enc <WEP passwd> mode managed essid <name> channel 6 ifconfig wlan0 up dhclient wlan0 At this point, dhclient stalls for ages (perhaps 2 minutes), then it returns with PING 192.168.1.254 (192.168.1.254) from 192.168.1.65 wlan0: 56(84) bytes of data. --- 192.168.1.254 ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3000ms pipe 3 .. The strange thing is that when I run pkill dhclient; dhclient wlan0 right after this, it connects in about <3 seconds. Any idea what could be the cause of this problem? Edit: oh, and I did try using the -timeout flag on dhclient but that didn't seem to make any difference (it still stalled for ages).

    Read the article

  • diagnose "corrupt file" problems

    - by Matthew
    My computer has been crashing the last couple weeks pretty regularly (at least once a day). A lot of times things I do will display a little notification in the bottom right saying something about a corrupt file. (I'm on Windows XP Pro Service Pack 3). When the computer does crash I get the "blue screen of death" usually. Some of the notifications also advise running the chkdsk utility. I cannot get it to successfully run. Using the command prompt (or even the "tools" menu after right clicking the drive and choosing properties), it will not run the utility (it says "do you want to schedule it to run next boot time" or whatever, which I confirm). The problem is that most of the time after restarting, it doesn't run at all. The few times it does run, it has an error (I can't remember the error right now, it at least says it's ntfs and such) and says disk checking will end. How can I get it to successfully run?

    Read the article

  • Booting Linux from External HDD, with persistence

    - by Moriarty
    I am trying to install Linux, specifically Lubuntu or BackTrack 5 on an external HDD (Seagate FreeAgent GoFlex) but I have had no luck using YUMI, or Untebootin to get it working. I want the hard drive to be able to save the data within Linux (As in, If I install a program, it will stay there). I also tried doing this with a flash drive, which does boot, but it does not save data (I tried following Pendrive's tutorial on creating a casper-rw file and adding "persistent" to various files, but I cannot get it to save files. Basically, I just want a form of linux on a portable device that will save files and settings between boots Note: I do not have a CD to install from. Any help would be greatly appreciated, Thanks!

    Read the article

  • Debian Harddrive Fdisk - Same ID's and changing letters

    - by James Willson
    I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

    Read the article

  • Debian Harddrive Fdisk - Same ID's and changing letters

    - by James Willson
    I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

    Read the article

  • Change Linux Console's Default Monitor

    - by Tim M
    Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

    Read the article

  • How can I install OpenSolaris without Graphical Environment - just text console?

    - by Sanoj
    I would like to install OpenSolaris and use it as a home-server. I will interact with it just with SSH, so I don't need the Graphical Environment. How can I install OpenSolaris without the Graphical Environment? And preferably I would like to use the SSH-interface as much as possible, is it even possible to do the installation over SSH? I tried the SSH-boot alternative on the installation-CD, then I have to use a password, but I have no password since I haven't installed the system yet.

    Read the article

< Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >