opensuse 11 3 - Page 296

Debian Wheezy (testing) df reported volume size

- by TheRoadrunner

I am a bit confused about the /dev/sda* references since I installed Wheezy instead of Squeeze on a testing box. fdisk -l returns: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e9623 Device Boot Start End Blocks Id System /dev/sda1 * 2048 480278527 240138240 83 Linux /dev/sda2 480280574 488396799 4058113 5 Extended /dev/sda5 480280576 488396799 4058112 82 Linux swap / Solaris This seems correct. But df -h /dev/sda (and /dev/sda1 and /dev/sda2 and /dev/sda5) returns: Filesystem Size Used Avail Use% Mounted on udev 10M 0 10M 0% /dev The same happens with every entry under /dev/disk/by-id and /dev/disk/by-path. Only one of two entries under /dev/disk/by-uuid returns the correct volume size: df -h /dev/disk/by-uuid/cacdbad6-7e6b-4e80-84ba-e3c77ef48796 Filesystem Size Used Avail Use% Mounted on /dev/disk/by-uuid/cacdbad6-7e6b-4e80-84ba-e3c77ef48796 229G 22G 196G 11% / Contents of /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=cacdbad6-7e6b-4e80-84ba-e3c77ef48796 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=45840d13-ee36-4e77-8e73-16cbdff25eb1 none swap sw 0 0 /dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 It seems all other references than the uuid points to the swap partition. Is this because Wheezy is in testing, and should it be reported as an error?

Read the article

DRBD as a block device for XEN VM (Centos 5.3)

- by SaberTooth

Hi all, I have setup a drbd resource between 2 server nodes - everything works correctly when doing sync tests between the two. (I want to create a HA cluster using drbd,xen and heartbeat) However, when I try and create a XEN VM with Centos as guest operating system, I get through to the partitioning screen on the install but when I select a partitioning type the next screen gives me the following error : "An error has occurred - no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem." This is the first time attempting create a setup like this and searching Google does not help much... my config files for DRBD and XEN.... DRBD (just the section that is pertinent) on xennode0 { device /dev/drbd0; disk /dev/sda5; address X.X.X.X:7788; flexible-meta-disk internal; } on xennode1 { device /dev/drbd0; disk /dev/sda5; address X.X.X.X:7788; meta-disk internal; } XEN kernel = "/boot/xeninstall/vmlinuz" ramdisk = "/boot/xeninstall/initrd.img" extra = "text" name = "VM" maxmem = 3000 memory = 3000 vcpus = 4 on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vfb = [ ] disk = [ "phy:/dev/drbd0,sda1,w", "tap:aio:/srv/xen/xenswap.img,sda2,w" ] vif = [ "mac=00:16:3e:11:67:ae,bridge=xenbr0" ] root = "/dev/sda1 ro" Thanks in advance!

Read the article

Extend Linux Desktop to another X Windows Display

- by unknown (google)

Hello, I am a long time Linux user of the Xinerama and other technologies for extending a desktop to multiple monitors. However when I travel with my laptop I miss the multi-monitor support I enjoy at home. Recently I acquired a second laptop for a low price. Both laptops are running Fedora (versions 10 and 11 respectively). I use Gnome as my primary desktop environment. I know about synergy. I use synergy all the time to control the screen of other Windows / Linux systems I use. I would like to know, can I sit both my primary and secondary laptops together and achieve a Xinerama-like extended desktop environment? Ideally I would like to start a GNOME session on my primary laptop. And then start a X-Windows Desktop on my secondary laptop and extend my primary laptop's desktop onto it. I would like to be able to move Windows from the primary desktop to the secondary laptop desktop. Would I need to use synergy to do this with some other bit of X-Windows technology? Or is there X-Windows technology that will do all this for me? I am familiar with X Windows ability to display applications remotely. I am also familiar with Nomachine's NoX.

Read the article

How do I troubleshoot nginx not recognizing passenger?

- by Jade

Issue: nginx does not seem to recognize my rails application Symptoms: When the server starts up, it shows the "Welcome to nginx!" message instead of my Rails application. Nginx seems to be using the local nginx path instead of the Rails root I specified: 2010/04/18 06:29:06 [error] 783#0: *1 "/usr/local/nginx/html/blog/index.html" is not found (2: No such file or directory), client: 1.2.3.4, server: www.farmerjade.com, request: "GET /blog/ HTTP/1.1", host: "www.farmerjade.com" I used [RVM and Passenger Setup on NGINX][1] to install nginx and passenger on a virtual machine. Here is my nginx configuration: user farmerjade; worker_processes 1; ... http { include mime.types; default_type application/octet-stream; passenger_ruby /home/farmerjade/.rvm/bin/passenger_ruby; passenger_root /home/farmerjade/.rvm/gems/ree-1.8.7-head/gems/passenger-2.2.11; ... server { listen 80; server_name www.farmerjade.com; root /home/farmerjade/farmerjade/public; passenger_enabled on; rails_env development; ... I'd appreciate any help anyone has to offer -- I'm quite new to nginx.

Read the article

How to determine if my AWS/EC2 server has been compromised / resolution?

- by ElHaix

I have recently seen an increase in network in/out activity on my server and am trying to determine if my AWS/EC2 instance has been compromised, and if so, how to resolve? In my security group I have: Inbound: 80 (HTTP) 0.0.0.0/0 Outbound: 80 (HTTP) 0.0.0.0/0 443 (HTTPS) 0.0.0.0/0 Using TCP-UDP Endpoint Viewer: I see a lot of w3wp.exe TCP processes with varying local ports http and numbered, as well as varying remote ports. Some processes go red/yellow/green on updates . I see Remote address for most w3wp processes are my ec2 instance, however I am seeing several to *.deploy.akamaitechnologies.com and *.deploy.static.akamaitechnologies.com with received bytes varying between 4-11 megs. I also see Ec2Config.exe, remote address: 169.254.169.254 System Process Remote Address: fetcher4-4.p.mail.ru (how can I get rid of this one?!) local port: http remote port: 33432 I am also seeing some system processes from 114.216-244-93-rdns.wowrack.com: Protocol: TCP local port: http remote port: varying As well as some baiduspider "System Process"'s. I'm afraid that my system may have been compromised, and wondering if these results are any indication of that. If so, how can I get eliminate these possible threats? I have MS Security Essentials installed.

Read the article

Firefox: Clear History Is SUPER EFFECTIVE?

- by acidzombie24

I'm seeing a performance problem on certain sites (like gmail) which clearing the history should not affect. Is this a website problem or a firefox problem and what can i do to fix it w/o clearing my history? Also as a webdeveloper i am interested in how to make this happen (or not happen). I'm using firefox 8 and i confirmed the problem by copying my profile to firefox 11 (portable). To reproduce go to gmail.com and sign in. Have your task manager open. Once you click signin or hit enter gmail will bring up your emails. Keep your eye on the CPU usage. I checked and right now on this machine its using all my CPU for 22seconds!!!! Yes. 22 seconds. Once i cleared my "browser & download history" Its <6seconds. WTF. I have no idea why or how the size of history and CPU usage when loading up gmail are correlated. I have firefox setup so it never clears the history. But... 22seconds is a disaster. Can someone explain why this is happening or a fix that isnt clearing my history? I tried visiting a few websites and only gmail eats up that much CPU. Most websites only take <5sec of max CPU. So maybe this is a gmail problem? Or a firefox problem that gmail happens to hit? I still dont understand why it happens. -edit- I forgot to mention places.sqlite is 90mb. I dont think that matters. I have a sqlite file 400mb which is pretty much 2 large tables. It has no performance issues

Read the article

Why is only one wget command working in my crontab?

- by afEkenholm

I wish to fetch content from a PHP script on my server two times a day, altering a query variable lang to set what language we want, and save this content in two language specific files. This is my crontab: */15 * * * * ~root/apache.sh > /var/log/checkapache.log 10 0 * * * wget -O /path/to/file-sv.sql "http://mydomain.com/path/?lang=sv" 11 0 * * * wget -O /path/to/file-en.sql "http://mydomain.com/path/?lang=en" The problem is that only the first wget command line is being executed (or to be precise: the only file that is being written is /path/to/file-sv.sql). If I switch the second and the third row, /path/to/file-en.sql gets written instead. The first line always runs as expected, no matter where it is. I then tried using lynx -dump "http://mydomain.com/path/?lang=xx" > /path/to/file-xx.sql to no avail; still only the first lynx line executed successfully. Even mixing wget and lynx did not change this! Getting kinda desperate! Am I missing something? There are thousands of articles on crontab (combined with) wget or lynx, but all seems to cover basic setups and syntax. Does anyone got a clue of what I am doing wrong? Thanks, Alexander

Read the article

nginx logrotate config

- by TomOP

Whats the best way to rotate nginx logfiles? In my opinion, I should create a file "nginx" in /etc/logrotate.d/ and fill it with the following code and do a /etc/init.d/syslog restart after that. This would be my config (I havn't tested it yet): /usr/local/nginx/logs/*.log { #rotate the logfile(s) daily daily # adds extension like YYYYMMDD instead of simply adding a number dateext # If log file is missing, go on to next one without issuing an error msg missingok # Save logfiles for the last 49 days rotate 49 # Old versions of log files are compressed with gzip compress # Postpone compression of the previous log file to the next rotation cycle delaycompress # Do not rotate the log if it is empty notifempty # create mode owner group create 644 nginx nginx #after logfile is rotated and nginx.pid exists, send the USR1 signal postrotate [ ! -f /usr/local/nginx/logs/nginx.pid ] || kill -USR1 `cat /usr/local/nginx/logs/nginx.pid` endscript } I have both the access.log and error.log files in /usr/local/nginx/logs/ and want to rotate both daily. Can anyone please tell me if "dateext" is correct? I want the log filename to be something like "access.log-2010-12-04". One more thing: Can I do the log rotation every day on a specific time (e.g. 11 pm)? If so, how? Thanks.

Read the article

How to diagnose issue between mobo, RAID, and SSD cache drive? [migrated]

- by goober

Background This issue is happening on my custom-built desktop. Relevant specs: Motherboard: ASUS P8Z68-V PRO Utilizing Intel RST technology (application that uses unused SSD as cache) Processor: Intel core i7-2600k (not overclocked) HDDs: RAID1 of 2x Seagate Barracuda 1TB (ST31000524AS) (RAID performed via z68 chipset) Machine has run fine for ~1 year with no issues, and has been well-maintained (dust, etc.) What Happened Random Freezing issues -- intermittent Looked at the RST application screen to see that the acceleration cache was listed as "unavailable" -- recommended that I power down and reconnect the drive. Reconnected the drive to no avail. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Now, the freeze happens whenever loading something particularly data-driven (a video, a game, etc.) Steps Attempted Reconnected the drive to no avail. Updated Intel RST software to v. 11.6.0.1030 to see if that made a difference. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Connected the drive as its own volume. Formatted it, ran disk check errors -- all seems fine. Reconnected the drive and selected it again as the cache drive. Now, what happens when there is a freeze: Machine freezes I am unable to perform any command Screen then goes black I hit the reset button During boot, all drives show as "Disabled" and I am told no volume can be found I then hit the reset button (or power off/on) again. Either the next time (or sometimes after repeating this once more), the metadata cache is reconstructed and the system boots fine, showing the SSD as a cache. Question I believe this is an issue with the SSD itself, but how can I be sure since connecting it separately appeared to show no problems? I want to make sure it's not an issue with the motherboard, SATA ports, etc.

Read the article

can't register a soft phone to asterisk11

- by Tom

I have a VM (on oracle vbox) running Fedora17. I've installed asterisk 11 on it from sources. I've followed the wiki for installation (https://wiki.asterisk.org/wiki/display/AST/Creating+SIP+Accounts) to the letter. The ip on the VM machine running fedora is 192.168.1.7 and I can ping it from the host machine (Ubuntu 12.04), which is at 192.168.1.2 I've tried registering with ekiga with the following settings: user: [email protected]. Password: verysecretpassword registar: 192.168.1.7 but I'm getting an error "transport fail". Also, while trying to register I'm logged in to the asterisk CLI with verbose level 3 and debug level 4 and nothing appears. some more relevant data: I've added the following code to the end of my sip.conf.sample file: [demo-alice] type=friend host=dynamic secret=verysecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 [demo-bob] type=friend host=dynamic secret=othersecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 After I changed the sip.conf.sample file, I've created a copy of it and named it sip.conf. then I logged in to the asterisk CLI and typed sip reload. Then I'm trying to register and ekiga client from my host machine at 192.168.1.2 but it doesn't work and nothing appears on the asterisk CLI while in verbose mode level 3. BTW, If there is missing information about my question, please don't close it. comment about what you need to know and I'll edit it in to the question. tnx.

Read the article

bond0:0 + define virtual IP

- by yael

in my Linux server I have the following: Linux Version - RedHat-Linux- 5.3.0.0 (this Linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it possible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

Read the article

Cloning a git repository from a machine running OS X

- by Mike

Hi folks, I'm trying to host a git repository from my home OS X machine, and I'm stuck on the last step of cloning the repository from a remote system. Here's what I've done so far: On the OS X (10.6.6) machine (heretofore dubbed the "server") I created a new admin user Logged into the new user's account Installed git Created an empty git repository via "git init" Turned on remote login Set port mapping on my router (airport extreme) to send ssh traffic to the server Added a ".ssh" directory to the user's home directory From the remote machine (also an OS X 10.6.6 machine), I sent that machine's public key to the server using scp and the login credentials of the user created in step 1 To test that the server would use the remote machine's public key, I ssh'd to the server using the username of the user created in step 1 and indeed was able to connect successfully without being asked for a password I installed git on the remote machine From the remote machine I attempted to "git clone ssh://[email protected]:myrepo" (where "user", "my.server.address", and "myrepo" are all replaced by the actual username, server address and repo folder name, respectively) However, every time I try the command in step 11, I get asked to confirm the server's RSA fingerprint, then I'm asked for a password, but the password for the user I set up for that machine never works. Any advice on how to make this work would be greatly appreciated!

Read the article

MysqlTunner and query_cache_size dilemma

- by wbad

On a busy mysql server MySQLTuner 1.2.0 always recommends to add query_cache_size no matter how I increase the value (I tried up to 512MB). On the other hand it warns that : Increasing the query_cache size over 128M may reduce performance Here are the last results: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.25-1~dotdeb.0-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 6G (Tables: 195) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 51 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 1d 19h 17m 8s (254M q [1K qps], 5M conn, TX: 139B, RX: 32B) [--] Reads / Writes: 89% / 11% [--] Total buffers: 24.2G global + 92.2M per thread (1200 max threads) [!!] Maximum possible memory usage: 132.2G (139% of installed RAM) [OK] Slow queries: 0% (2K/254M) [OK] Highest usage of available connections: 32% (391/1200) [OK] Key buffer size / total MyISAM indexes: 128.0M/92.0K [OK] Key buffer hit rate: 100.0% (8B cached / 0 reads) [OK] Query cache efficiency: 79.9% (181M cached / 226M selects) [!!] Query cache prunes per day: 1033203 [OK] Sorts requiring temporary tables: 0% (341 temp sorts / 4M sorts) [OK] Temporary tables created on disk: 14% (760K on disk / 5M total) [OK] Thread cache hit rate: 99% (676 created / 5M connections) [OK] Table cache hit rate: 22% (1K open / 8K opened) [OK] Open file limit used: 0% (49/13K) [OK] Table locks acquired immediately: 99% (64M immediate / 64M locks) [OK] InnoDB data size / buffer pool: 6.1G/19.5G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 192M) [see warning above] The server has 76GB ram and dual E5-2650. The load is usually below 2. I appreciate your hints to interpret the recommendation and optimize the database configs.

Read the article

Cant configure DNS properly on centos

- by Nuker

I am on a VPS i must manage my own. I have network problems because in the last days many of my users report they cant enter my site from my domain and seems like Google and Facebook cant either (this never happened before). However i can enter my site without problems and so many other people as well. So i tested by making a php include like this <?php include 'http://mysite.com/somepage.php'; ?> and i get this error: Warning: include(): php_network_getaddresses: getaddrinfo failed: Name or service not known in I even tried by including content from yahoo.com or facebook and didnt work either. However the includes will work if i use IPs instead of domains. Do i have a DNS problem or something? What can i do to fix it? Im on a Linux 2.6.32-431.11.2.el6.x86_64 on x86_64 CentOS Linux 6.5 I have this on my resolv.conf # Generated by NetworkManager # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com nameserver 8.8.8.8 nameserver 8.8.4.4 Thank you.

Read the article

Error at the end of APC install

- by cinqoTimo

I need to get APC running for a Drupal install of mine. I found a fairly concise guide at http://blog.4rev.net/2009-09/installing-apc-accelerator-into-php5-fedora-core-11/ for installing on FC11, only, I am using FC12. I figured I would give it a shot. I was able to run the following commands successfully - and yum installed fc12 versions of everything in the FC11 guide. yum install php-pear yum install php-devel httpd-devel yum groupinstall ‘Development Tools’ yum groupinstall ‘Development Libraries’ Then, I tried pecl install apc. Everything looked good until to got to the end, where it outputted the following error. /var/tmp/APC/php_apc.c: In function ‘zif_apc_compile_file’: /var/tmp/APC/php_apc.c:881: warning: unused variable ‘eg_class_table’ /var/tmp/APC/php_apc.c:881: warning: unused variable ‘eg_function_table’ /var/tmp/APC/php_apc.c: At top level: /var/tmp/APC/php_apc.c:959: error: duplicate ‘static’ make: *** [php_apc.lo] Error 1 ERROR: `make' failed Some people have had success with installing apc-beta, but that didn't work for me.. Any suggestions? Is there something I missed that is critical in the FC12 version?

Read the article

Files showing in smbclient but not smbmount

- by Staale

I have a samba folder that I try and access through smbclient, and I can browse it just fine. However, mounting it through smbmount, all the folders under the share are empty. I can list the folders directly under the share fine, but they all appear empty. smbclient: # smbclient //server/share -U username -W workgroup password smbmount # sudo smbmount //server/share mntpoint -o user=username,workgroup=workgroup,password=password I have also tried with domain=workgroup instead of workgroup, both give the same result. No error messages, everything mounts fine, but all the folders under mntpoint are empty, despite the same folders being non-empty when using smbclient. Are these using different libraries? How can I debug the error? Additionally, if I try to mount //server/share/folder, doing an ls results in a segmentation fault. Using dmesg I find: kernel BUG at /build/buildd/linux-2.6.28/fs/cifs/cifs_dfs_ref.c:315! Full trace: http://pastebin.com/m70adc213 Using a credentials file, I first get empty dirs, then Resource temporarily unavailable. In my dmesg I see the following output: CIFS VFS: compose_mount_options: Failed to resolve server part of \\srv\share to IP: -11

Read the article

Apache APC (Windows) Can I optimize these APC settings more?

- by ar099968

I would like to optimize APC some more but I am not sure where I could do something. First here is the stats after 1 week of running with the current configuration: General Cache Information APC Version 3.1.9 PHP Version 5.4.4 APC Host XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Server Software Apache Shared Memory 1 Segment(s) with 128.0 MBytes (IPC shared memory, Windows Slim RWLOCK (native) locking) Start Time 2014/06/08 05:00:00 Uptime 6 days, 11 hours and 55 minutes File Upload Support 1 Host Status Diagrams Memory Usage Free: 99.7 MBytes (77.9%) Used: 28.3 MBytes (22.1%) Hits & Misses Hits: 510818 (99.9%) Misses: 608 (0.1%) Detailed Memory Usage and Fragmentation Fragmentation: 0.60% (609.8 KBytes out of 99.7 MBytes in 83 fragments) File Cache Information Cached Files 693 ( 35.4 MBytes) Hits 5143359 Misses 1087 Request Rate (hits, misses) 13.24 cache requests/second Hit Rate 13.24 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.01 cache requests/second Cache full count 0 User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 0 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters -/apc.php$, -/apc_clean.php$, -.tpl.cache.php$, -.tpl.php$, -.string.cache.php$, -.string.php$ apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 2M apc.num_files_hint 7000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 128M apc.shm_strings_buffer 4M apc.slam_defense 0 apc.stat 1 apc.stat_ctime 0 apc.ttl 7200 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 7200 apc.write_lock 1

Read the article

Linux 2.6.24-gentoo-r3-comtrance on x86_64 high Useage for unknown reasons

- by Dorjan

Hello everyone, I'm a complete rookie when it comes to all things Linux related so please treat me as such and assume I know nothing. That being said my Top says this: top - 12:08:03 up 11 days, 15:36, 0 users, load average: 5.47, 5.53, 5.46 Tasks: 296 total, 2 running, 294 sleeping, 0 stopped, 0 zombie Cpu(s): 6.3%us, 1.4%sy, 0.0%ni, 71.3%id, 20.6%wa, 0.0%hi, 0.3%si, 0.0%st Mem: 8176880k total, 8118236k used, 58644k free, 89312k buffers Swap: 1004052k total, 0k used, 1004052k free, 7235652k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1229 root 15 -5 0 0 0 D 1 0.0 199:28.63 kjournald 2946 root 20 0 1716 676 552 D 1 0.0 145:02.94 syslogd 14553 root 20 0 2644 1268 876 R 1 0.0 0:00.34 top 14609 postfix 20 0 7896 1884 1460 D 1 0.0 0:00.02 bounce 14630 postfix 20 0 7896 1876 1452 R 0 0.0 0:00.00 bounce And my hard drives says: > df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda3 4925556 4474836 200508 96% / /dev/sda5 489992 36090 428602 8% /tmp /dev/sda6 377951852 236171160 122581816 66% /var none 4088440 0 4088440 0% /dev/shm It has been like it for a few days now... I know not what is causing the high server load (Normally around 1.3) can anyone give any tips on how to track down the culprit? Many thanks,

Read the article

Apache https is slow

- by raucous12

Hey, I've set apache up to use SSL with a self signed certificate. With https (KeepAlive on), I can get over 3000 requests per second. However, with https (KeepAlive off), I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

Read the article

Safe to remove Python2.6 files?

- by darkfeline

I'm using Linux Mint 11 (will upgrade soon), and I've noticed that, even though I don't have any python2.6 packages installed with apt, there's a bunch of residual python2.6 files scattered around my drive, including, but not limited to, dist-packages in /usr/lib/python2.6 and various /usr/share stuff. Is there any way to test if these files are still being used? I'm tempted to sudo rm -rf the lot of them, but I'm scared it'll break stuff. Also, does anyone have any idea where these files could have come from? I believe I had python2.6 installed once upon a time, but I made sure to --purge them, so there shouldn't be any trace of them left, right? EDIT: after using a quick script to check all of the files, it appears most of them belong to important packages, so I won't try weeding out the few which I know are probably useless. Although I am curious why so many packages have python2.6 files when I don't even have it installed. These files are not associated with any packages and I'm not sure if they are safe to remove: /usr/bin/ipython2.6 /usr/lib/python2.6/dist-packages/distribute-0.6.15.egg-info /usr/lib/python2.6/dist-packages/easy_install.py /usr/lib/python2.6/dist-packages/IPython /usr/lib/python2.6/dist-packages/ipython-0.10.1.egg-info /usr/lib/python2.6/dist-packages/setuptools /usr/lib/python2.6/dist-packages/setuptools.egg-info /usr/lib/python2.6/dist-packages/setuptools.pth /usr/lib/python2.6/dist-packages/site.py /usr/lib/python2.6/dist-packages/wx.pth /usr/local/lib/python2.6 /usr/local/lib/python2.6/dist-packages /usr/local/lib/python2.6/site-packages /usr/share/man/man1/ipython2.6.1.gz

Read the article

No partition on USB Flash Drive?

- by Skytunnel

A friend gave me a corrupted USB memory stick to try recovery data from. But I've had some unusual results, so thought I'd share to see if anyone is familiar with this problem... First off I just tried opening from my own PC. Windows prompted to Format the drive, which I of course declined Downloaded TestDisk to anaylsis the drive. And right away I noticed something strange, on the listed drives it comes up as Disk /dev/sdc - 6144 B - USB Flash Drive That's right, the first USB flash drive smaller than a floppy disk!? Moving on anyway... first anaylsis comes up with: Partition sector doesn't have the endmark 0xAA55 TestDisk's Quick Search gave no results, moved on to Deeper Search: No partition found or selected for recovery This left me stumped. I tired a couple of other programs with no success I did manage to get a backup image, but it was just as small as TestDisk indicated, so nothing of use on it After a few hours trying various suggestions from other sources, I gave in and just tried formatting the drive. But returned the message: Windows was unable to complete the format. From googling that, the suggestion was to delete the partition. But there is no partition to delete in this case. most recently I've tried formatting from cmd, and got this result: Format D: /FS:FAT32 The type of the file system is RAW The new file system is FAT32 Verifying 0M 11 bad sectors were encountered during the format. These sectors cannot be guaranteed to have been cleaned The volume is too small for FAT32 Anyone got any suggestions? UPDATE: As per suggestion from @Karen, I tried running a CLEAN from DISKPART, results as follows DiskPart has encountered an error: The request could not be preformed because of an I/O device error.

Read the article

Only receiving one document at a time from new web server.

- by Robert Kuykendall

We're trying to move our internal ticketing system from a Microsoft Small Business Server in the server closet to a Rackspace Cloud Server. The install is Fedora 11 LAMP, and should be default out of the box, except for the vhosts appended to the bottom of the httpd.conf. The new server is suffering from crippling load times, and watching the page load in Firebug it's easy to see the problem occurring, but I can't figure out the cause. Here is the [old server] (http://rkuykendall.com/uploads/old.server.png). I was expecting something like this, but a little slower since it was no longer hosted locally. Instead, the [new server] (http://rkuykendall.com/uploads/new.server.png) appears to only serve one file at a time. Here's another example of this [staircase load time effect] (http://rkuykendall.com/uploads/staircase.png) and another very clear example of the [staircase effect] (http://rkuykendall.com/uploads/staircase2.png). I talked to some guys on Freenode #httpd with no luck. I created a duplicate server to play with, and also created a fresh server with Fedora Core 13 and moved over just the database and web files with no luck. Any suggestions? ( image links disabled due to n00b-spam-restrictions )

Read the article

Why are all of my ZFS snapshot directories empty?

- by growse

I'm running an Oracle 11 box as a ZFS storage appliance, and I'm taking regular snapshots of the ZFS filesystems, via cron. In the past, I know that if I wanted to grab a particular file from a snapshot, a read-only copy was kept in .zfs/snapshot/{name}/ and I could just navigate there and pull the file out. This is documented on Oracle's website. However, I went to do this the other day, and noticed that the ZFS directories within the snapshot directories are all empty. zfs list -t snapshot correctly shows the list of snapshots that should be present, and .zfs/snapshots correctly contains a directory for each snapshot, and in each snapshot there is a directory present for each ZFS filesystem. However, these directories appear to be empty. I just tested a restore by touching a file in a little-used share and rolling back to the latest hourly snapshot, and this appears to have worked fine. So the rollback functionality is there. Did Oracle change how snapshots are done? Or is something seriously wrong here?

Read the article

Is it safe to force a dismount to format a volume in Windows?

- by sammyg

I am using format command in cmd to format a USB flash drive. M:\>format /FS:FAT32 /Q Required parameter missing - M:\>format M: /FS:FAT32 /Q Insert new disk for drive M: and press ENTER when ready... The type of the file system is FAT32. QuickFormatting 14999M Format cannot run because the volume is in use by another process. Format may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID. Would you like to force a dismount on this volume? (Y/N) y Volume dismounted. All opened handles to this volume are now invalid. Initializing the File Allocation Table (FAT)... Volume label (11 characters, ENTER for none)? Format complete. 14,6 GB total disk space. 14,6 GB are available. 8 192 bytes in each allocation unit. 1 917 823 allocation units available on disk. 32 bits in each FAT entry. Volume Serial Number is E00B-2739 M:\> Is it safe to force a dismount like this, and make the handles invalid?

Read the article

mysql - moving to a lower performance server, how small can I go?

- by pedalpete

Search Results

Search found 10306 results on 413 pages for 'opensuse 11 3'.

Page 296/413 | < Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303 | Next Page >

- by TheRoadrunner

- by SaberTooth

- by unknown (google)

- by Jade

- by ElHaix

- by acidzombie24

- by afEkenholm

- by TomOP

- by goober

- by Tom

- by yael

- by Mike

- by wbad

- by Nuker

- by cinqoTimo

- by Staale

- by ar099968

- by Dorjan

- by raucous12

- by darkfeline

- by Skytunnel

- by Robert Kuykendall

- by growse

- by sammyg

- by pedalpete

< Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303 | Next Page >