Search Results

Search found 25963 results on 1039 pages for 'ask for recommendation'.

Page 297/1039 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

  • Problem with sound driver

    - by JiminP
    I had problem that sound had lag in Flash. (Other than that, there was no problem.) On the internet, I found that installing OSS4 might help me. So I installed OSS4, but there was some problems (no sound on Flash, and couldn't use function key on the laptop - which is quite annoying), so I try to remove OSS4 and re-installing sound modules. After some mess-up, the whole sound was gone. I used Ubuntu for a year, but I don't know how to use the terminal well (All I know is basic commands like sudo, ls, or apt-get).. Now I'm trying to recover by following instructions at this page, but I have some problems... :( When I try to follow instructions: sudo aplay -l finds no sound drivers. find /lib/modules/'uname -r' | grep snd (backtick changed to ' due to code markup) returns nothing. When I try to do sudo apt-get install linux-restricted-modules-'uname -r' linux-generic, it says that it can't find linux-restricted-modules-3.0.0-13-generic package. lspci -v | grep -A7 -i "audio" returns this, which doesn't contain anything about the name of the driver. Writing sudo modprobe sn and pressing tab twice only returns sudo modprobe sn9c102. sudo aptitude --purge reinstall linux-sound-base alsa-base alsa-utils linux-image-'uname -r' linux-ubuntu-modules-'uname -r' libasound2 returns this, and didn't change non of above. sudo apt-get install linux-alsa-driver-modules-$(uname -r) fails because it can't find the package linux-alsa-driver-modules-3.0.0-13-generic. Compiling ALSA driver doesn't work. When I try to make, it says that /lib/modules/3.0.0-13-generic/build/include/linux/modversions.h doesn't exist. I'm using Ubuntu 11.10. Can anyone help me? I can re-install Ubuntu, but I don't want to....

    Read the article

  • Can't connect to wireless on Lubuntu

    - by migwke
    I have a CISCO 802.11b WIFI Mini PCI LAN card in my IBM ThinkPad T30 laptop. Is this wireless card compatible with Lubuntu? I have Lubuntu installed and it just won't connect. It keeps saying that it is trying to configure then it says that it is connected but it does not work. I know that the wireless network is working correctly because I can connect to it with all my other devices and it works on this very same laptop when I am running Windows. I added the following commands to blacklist.conf, but still no luck blacklist padlock_aes blacklist geode_aes

    Read the article

  • Left mouse button not working in Xubuntu session

    - by giodamelio
    I recent changed from Ubuntu to Xubuntu 12.04. The install worked great for a few days, but suddenly the left mouse button stopped working. The right click and scroll bars work fine. After a bit of experimenting I discovered that the problem only happens when I set the session to Xubuntu at login. The mouse also works fine in my dual-booted Windows vista. What could make my mouse stop working like that?

    Read the article

  • Deleted windows partition, now I can't get into Ubuntu

    - by Alejandro
    Back story: I installed ubuntu with wubi. I had windows on one NTFS partition, then I made a new NTFS partition in which I put wubi in and where My ubuntu OS was born. Eventually I moved /home into another partition and made a swap partition, but I digress. I deleted My original NTFS partition where windows is not thinking it would not matter but now I can't get into ubuntu. And the weird thing is that when I boot my computer I still see the option to boot into both windows and ubuntu. When I try to boot into windows, It tries to fix stuff and never succeds. When I try to boot into ubuntu, it shows me "cannot find GRLDR in all devices. Press CTRL+ALT+DELETE to restart". so, what do you guys think? I just want ubuntu running again, with all my stuff in /home there and all my system preferences how I like them.

    Read the article

  • Setting up Ubuntu Server as a Router with DHCPD and 3 Ethernet devices

    - by cengbrecht
    My configuration: Ubuntu 12.04 DHCP3-server eth0, eth1, eth2 Edit: removed br0&br1 eth0 is the external connection eth1 & eth2 are the internal network eth1 and eth2 are supposed to be seperate networks of student/teachers respectivly. What I would like to have is the internet from external device bridged to device 1 and 2, with the DHCP server controlling the two internal devices. Its already working with DHCP, the part I am stuck on is bridging for internet. I have setup a script that I found here: Router With the original script he linked here: Ubuntu Router Guide echo -e "\n\nLoading simple rc.firewall-iptables version $FWVER..\n" IPTABLES=/sbin/iptables #IPTABLES=/usr/local/sbin/iptables DEPMOD=/sbin/depmod MODPROBE=/sbin/modprobe EXTIF="eth0" INTIF="eth1" INTIF2="eth2" echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF" echo " Internal Interface: $INTIF2" EXTIP=`ifconfig $EXTIF | grep 'inet addr:' | sed 's#.*inet addr\:\([0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\).*#\1#g'` echo " External IP: $EXTIP" #====================================================================== #== No editing beyond this line is required for initial MASQ testing == The rest of the script below this is as is. I can get ip from the eth1 & eth2 devices, and my computer can see them, and them it, however, internet is not being passed through. If you need more information please just let me know. EDIT: So I had a 255.255.254.0 network, I believe that was causing the issue. Not sure if it will matter on the second card, I will test later. After changing the subnet to 255.255.255.0 the pings will pass through, however, I cannot get DNS requests to pass? My new Config for Firewall Rules # /etc/iptables.up.rules # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *mangle :PREROUTING ACCEPT [39:4283] :INPUT ACCEPT [39:4283] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [12:4884] :POSTROUTING ACCEPT [13:5145] COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -j LOG -A FORWARD -m state -i eth1 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth2 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth1 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth2 --state NEW,ESTABLISHED,RELATED -j ACCEPT COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *nat :INPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.1.25 COMMIT # Completed on Wed Nov 28 19:43:28 2012 Not sure what else you may need, but I am using Webmin to control the server(Needed for the operators on site to know how to use it.) If you could explain it as standard CLI commands, or edits to this file directly then we should be ok. :) And thanks again Erik, I do believe your edits did help.

    Read the article

  • Ubuntu 14.04 : Lost my sound randomly tried a few commands and I think I failed

    - by Marc-Antoine Théberge
    I lost my sound the other day and I tried to delete pulseaudio then reinstall, then I tried to delete it and install alsa, It did not work and I had to reinstall everything; overall bad idea... now I can't have any sound. Should I do a fresh install? I don't know how to boot an usb drive with GRUB... Here's my sysinfo System information report, generated by Sysinfo: 2014-05-28 05:45:58 http://sourceforge.net/projects/gsysinfo SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 14.04 (trusty) release. GNOME: 3.8.4 (Ubuntu 2014-03-17) Kernel version: 3.13.0-27-generic (#50-Ubuntu SMP Thu May 15 18:08:16 UTC 2014) GCC: 4.8 (i686-linux-gnu) Xorg: 1.15.1 (16 April 2014 01:40:08PM) (16 April 2014 01:40:08PM) Hostname: mark-laptop Uptime: 0 days 11 h 43 min CPU INFORMATION GenuineIntel, Intel(R) Atom(TM) CPU N270 @ 1.60GHz Number of CPUs: 2 CPU clock currently at 1333.000 MHz with 512 KB cache Numbering: family(6) model(28) stepping(2) Bogomips: 3192.13 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm dtherm MEMORY INFORMATION Total memory: 2007 MB Total swap: 1953 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: ST9160310AS HARDWARE INFORMATION MOTHERBOARD Host bridge Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) Subsystem: ASUSTeK Computer Inc. Device 8340 PCI bridge(s) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) ISA bridge Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: ASUSTeK Computer Inc. Device 830f IDE interface Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 830f GRAPHIC CARD VGA controller Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 8340 SOUND CARD Multimedia controller Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 831a NETWORK Ethernet controller Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: ASUSTeK Computer Inc. Device 8324

    Read the article

  • How can I remove packages using preseed?

    - by Jorge Castro
    I'm setting up an automated "no questions asked" preseed system and using Dustin Kirkland's server preseed as an example. He uses the following line to install three packages as part of the automated install: d-i pkgsel/include string byobu vim openssh-server I am looking for the inverse of this, basically be able to remove packages as part of the automated install. I've checked the Installation Guide I've checked this example preseed, but it's not clear if this is the canonical list of every single option available. I am thinking I need to to use d-i preseed/late_command string apt-remove packagename to clean up stuff I don't want when the install is done, but I am not sure

    Read the article

  • thunar-archive-plugin not working

    - by Sergio
    After I experienced serious not yet resolved performance issues with Nautilus I decided to move to XUbuntu so I installed its metapackage from Ubuntu and started using it. It turns out that the archive plugin for Thunar (provides the "Extract here" option in the contextual menu when right clicking over a compressed archive) is not working, even after I apt-get purged it and reinstalled. It simply doesn't show its options in the contextual menu. What should I do to make it work?

    Read the article

  • Setting primary internet connection and network on notebook

    - by Francois
    I have installed Ubuntu on a notebook that I have configured to connect to the internet using an Iburst USB modem. This works 100% after a bit of configuring. I now have a desktop pc that I have installed ubuntu on, and would like to connect the two with a router. I bought a router with wifi, and would like to connect my notebook to the other computer using wifi, while still keeping the internet working with the usb modem. The problem is that as soon as the wifi connect, the internet connection dies. Is there a way to force ubuntu to get internet access through the usb modem, but use wifi to connect to the network? I am pretty new to ubuntu so any help would be appreciated. I also have a samsung galaxy tab that I would like to connect to the internet through usb modem via the wifi, so is there also a way to share that internet connection with the other computers on the network? Thanks in advance.....

    Read the article

  • Gnome Shell Thunderbird Mail Notification

    - by Nerdfest
    Does anyone know of a way to get persistent Gnome 3 panel notifications in Gnome 3 in Oneiric? It's one of the few things holding me back from using Gnome 3 regularly. I've actually found a way of moving the notifications from the (usually) hidden bottom bar to the top, but it does not move the Thunderbird icon. The icon also only tends to appear the first time mail is received. I'm very surprised this basic piece of functionality doesn't exist for Gnome Shell.

    Read the article

  • Dell XPS 15 L502x and Ubuntu 11.04 - HDMI output

    - by Jones
    Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

    Read the article

  • Installation problem ubuntu 12.04 with hp Pavilion dv4 3006tx laptop

    - by akeeb
    I am trying to install ubuntu 12.04 in my laptop containing model is HP Pavilion dv4 3006 tx , it has 1GB Graphics card( Video Graphics AMD Radeon HD 6750M (1 GB DDR5) ). Installation process is taken by my laptop but there are problem when rebooting it . When i want to open ubuntu as my operating system it does't open , my laptop Display turn off . more info about my pc configuration pls visit: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02780984&jumpid=reg_R1002_USEN#A1 Collapse this comment

    Read the article

  • Cannot install Ubuntu

    - by Tasso
    I'm using Windows 7 and when I try to install and this message appears: "An error ocurred: Could not retrieve the required installation files For more information, please see the log file: c:\users\.............\wubi-12.10-rev273.log" The final part of the log - 12-17 13:43 DEBUG Distro: checking whether F:\ is a valid Ubuntu CD 12-17 13:43 DEBUG Distro: parsing info from str=Ubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.2) 12-17 13:43 DEBUG Distro: parsed info={'name': 'Ubuntu', 'subversion': 'Release', 'version': '12.10', 'build': '20121017.2', 'codename': 'Quantal Quetzal', 'arch': 'i386'} 12-17 13:43 INFO Distro: Found a valid CD for Ubuntu: F:\ 12-17 13:43 INFO root: Running the uninstaller... 12-17 13:43 INFO CommonBackend: This is the uninstaller running 12-17 13:43 DEBUG WindowsFrontend: __init__... 12-17 13:43 DEBUG WindowsFrontend: on_init... 12-17 13:43 INFO WinuiPage: appname=wubi, localedir=C:\Users\TASSO'~1\AppData\Local\Temp\pylED6A.tmp\translations, languages=['en_US', 'en'] 12-17 13:43 INFO WindowsFrontend: Operation cancelled 12-17 13:43 DEBUG WindowsFrontend: frontend.quit 12-17 13:43 DEBUG WindowsFrontend: frontend.on_quit 12-17 13:43 DEBUG root: application.on_quit 12-17 13:43 INFO root: sys.exit

    Read the article

  • Automatic TRIM vs. manual TRIM

    - by Eike Cochu
    I am currently trying to find out how to trim with my new TP and was wondering about the difference of manual/online trimming. Here is my setup: ThinkPad T430s with SSD Samsung 830, 128GB and Xubuntu 12.10, here are some outputs to check if trim will work on my system (got these from here: http://wiki.ubuntuusers.de/SSD/TRIM) root@eike-tp:~# sudo hdparm -I /dev/sda | grep -i TRIM * Data Set Management TRIM supported (limit 8 blocks) First, I tried the online trimming: How to enable TRIM? my fstab with discard inserted: UUID=d6c49c17-a4f1-466c-9f7e-896c20db3bba / ext4 discard,noatime,errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=a0322f5f-c6c1-4896-863f-668f0638d8cf none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 I tried to test if it works (but I don't get any zeroes when I try it with /dev/sda), but found out that this method is only possible with SSD type 2 and I seem to have type 3. So I don't know if it works or not. The Ubuntuwiki (first link) recommends manual trimming, so I set up a daily cronjob instead of discard: #!/bin/sh LOG=/var/log/batched_discard.log echo "*** $(date -R) ***" >> $LOG fstrim -v / >> $LOG the wiki article suggests weekly or daily. Now to my questions: How often executes the automated trim? How often is recommended? Online vs. manual trimming? Thank you for your help

    Read the article

  • No Android SDK, neither Java found

    - by Alex
    I have Java installed correctly, I did it by the manual http://www.wikihow.com/Install-Oracle-Java-on-Ubuntu-Linux I also installed Android SDK. However when I try to create a new Project IntelliJ Idea 12 and specify Project SDk choosing New - /home/alex/android-sdk-linux , it says me No Java SDK of appropriate version found. In addition to the Android SDK, you need to define a JSDK 1.5, 1.6 or 1.7 What did I miss?

    Read the article

  • How do I make the PolicyKit authentication agent window not dissapear when I enter faulty password in Ubuntu 12.04?

    - by Petar
    As far as I remember in previous versions of Ubuntu, whenever authentication was required and when the PolicyKit authentication agent window was presented, it stayed there even after I would enter a faulty password. But now, whenever I make a mistake, the window is closed immediately. I find this behaviour irritating. For instance I use Synaptic rather frequently, and I prefer to start it using Synapse. I press Ctrl+Space to invoke Synapse, then I enter "syn" (s-shows SMplayer, sy- shows System Monitor) and than I press Enter so that Synaptic is invoked. Then I'm presented with the PolicyKit authentication agent window. As my password is rather complicated - using special characters and big letters, it's easy to make a mistake. If I do make a mistake while typing my password, I'm forced to redo all the previous steps. It's annoying as hell, knowing that this is not the way the PolicyKit authentication agent window behaved before. It used to warn me that the password was not correct and than wait for the correct input. I'm not sure if it allowed trying for the correct password indefinitely, or it was limited to 3 retries which is a much saner behaviour than the current one. I'm using Gnome 3, but the same thing happens in Unity too, although the window looks different.

    Read the article

  • Errors when trying to compile the driver for the rtl8192su wireless adapter

    - by Tom Brito
    I have a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme says to use the make command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g sudo lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) sudo lsusb Bus 002 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1 Bus 001 Device 003: ID 0b05:1786 ASUSTek Computer, Inc. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • Wrong package for Idle-python2.7?

    - by adelval
    I'm running python 2.7 in Ubuntu 3.10, and idle (idle-python2.7) has stopped working. Whenever I try to open a file in a editor window, it is blank, though the file does exist and is not empty/blank. Furthermore, it is not possible to close idle after this, except via a terminal kill command. Idle was working fine before. The problem appeared after I installed a number of things, including idlex, various scipy modules and mpmath, but after trying to repair it in several ways, it seems to be caused by Ubuntu's official idle package. I get this error in the terminal when trying to open a file in idle: Exception in Tkinter callback [...lines ommitted for brevity...] File "/usr/lib/python2.7/idlelib/IOBinding.py", line 129, in coding_spec for line in lst: NameError: global name 'lst' is not defined If you look at the code, it looks like an obvious bug: indeed lst is not defined in the function coding_spec. Furthermore, the source file IOBinding.py in http://fossies.org/dox/Python-2.7.5/IOBinding_8py_source.html is different and doesn't show the problem. Thinking that one of the recently packages had overwritten the file somehow, I've tried a number of things, including reinstalling all Python packages from synaptic, but the wrong IOBinding.py is still there. The reason I think the problem lies with the package itself is that I finally did sudo apt-get remove idle, verified that the idlelib directory was empty, and reinstalled with sudo apt-get install idle; but the wrong IOBinding.py file came back again. I can in fact make idle work again by simply replacing lst by str in the code, but to me that's clearly a no-no. I'm not to happy either about trying to replace just that file from the source python distribution, as other files may be wrong. I want to get the right files from the official package.

    Read the article

  • Can anyone tell me how to get the same Gnome desktop environment as the one in the photo?

    - by Elysium
    I have been using gnome fallback for more than a year, but recently I have come across this image: However, when in virtual machine (new copy of ubuntu 12.04) I change to gnome 3 shell, the desktop is not even similar to the one in the photo above. I am wondering if there are others things that I am missing/have to do....to get to the same thing (or similar) that you can see in the image above. NOTE: Here is a screenshot from the virtual machine after I used these commands: sudo add-apt-repository ppa:gnome3-team/gnome3 sudo apt-get update sudo apt-get install gnome-shell

    Read the article

  • Keyboard freezes when xorg crashes.

    - by gsedej
    Situation is like that. Many times has happened that Xorg freezes and with it also keyboard. Quite some times because of some Compiz effects or Flash (fullscreen switch). Keyboard becomes totaly unresponsive, while mouse still works (I can move cursor, but can't click since desktop freezes) and music still plays and I can connect trough ssh. This is the only way I know I can try to solve problem - either by killing browser&flash or lastly restarting xorg server. This problem appears on more than one Ubuntu computer. My home dekstop with proprietery nvidia driver, on my work where I use noveau driever (opensource driver for geforce) and sometimes (but rarely) also on laptop with ATI graphics (using r300g driver which is really good!). Can someone explains why mouse still works while I can't input from keyboard? (I can't switch to virtual console or do R-E-I-S-U-B command) I have USB keyboard and USB mouse.

    Read the article

  • Will there be a Ubuntu Serif font in the future?

    - by Ingo Gerth
    Since 10.10 we have the wonderful new Ubuntu sans serif font. If everything goes well 11.04 will bring a great looking new monospace font. It would only be a logical step to also develop a serif font! This way, the Ubuntu experience would get its definite touch. It could for example give a very special web experience as proposed and supported in this post, by covering the three major font families. Now of course the question remains, are there any plans for this?

    Read the article

  • Getting a Conexant CX23885 TV Capture Card working

    - by Benny
    I'm new to Linux, and am trying to get my Capture Card working on 11.04. The only command that I know to run to find out any information is lspci, which tells me that I have 02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) I've looked at using Me TV, but haven't worked out how to configure it for my card, or what I need to do to get it running. I'm not fussed on what software I use to run the Capture Card, but I've currently got only Me TV installed. Edit: When I run tvtime, I get the following errors: videoinput: Cannot open capture device /dev/video0: No such file or directory mixer: find error: Success mixer: Can't open mixer default, mixer volume and mute unavailable. mixer: Can't open device default/Line, mixer volume and mute unavailable. Segmentation fault

    Read the article

  • Why don't %MEM values add up to mem in top?

    - by ben
    I'm currently debugging performance issues with my VPS and for that I'm trying to understand which of the processes eat the most memory. Reading top, here's what I get: Mem: 366544k total, 321396k used, 45148k free, 380k buffers Swap: 1048572k total, 592388k used, 456184k free, 7756k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 12339 ruby 20 0 844m 74m 2440 S 0 20.8 0:24.84 ruby 12363 ruby 20 0 844m 73m 1576 S 0 20.6 0:00.26 ruby 21117 ruby 20 0 171m 33m 1792 S 0 9.3 2:03.98 ruby 11846 ruby 20 0 858m 21m 1820 S 0 6.0 0:09.15 ruby 21277 ruby 20 0 219m 11m 1648 S 0 3.2 2:00.98 ruby 792 root 20 0 266m 10m 1024 S 0 3.0 1:40.06 ruby 532 mysql 20 0 234m 4760 1040 S 0 1.3 0:41.58 mysqld 793 root 20 0 250m 4616 984 S 0 1.3 1:20.55 ruby 586 root 20 0 156m 4532 848 S 0 1.2 6:17.10 god 12315 ruby 20 0 175m 2412 1900 S 0 0.7 0:07.55 ruby 3844 root 20 0 44036 2132 1028 S 0 0.6 1:08.22 ruby 10939 ruby 20 0 179m 1884 1724 S 0 0.5 0:08.33 ruby 4660 ruby 20 0 229m 1592 1440 S 0 0.4 2:55.46 ruby 3879 nobody 20 0 37428 964 520 S 0 0.3 0:01.99 nginx As you can see my memory is about 90% used (which is my issue) but when you add up the %MEM values, it goes to about 50-60% only. Same thing, RES doesn't add up to ~350mb. Why? Am I misunderstanding their meaning? Thanks

    Read the article

  • how to reset monitor display settings

    - by vector
    On Ubuntu 12.4 laptop with Gnome desktop, I tried to set an additional display through Catalyst (administrative) and slowly ended up making making a mess out of the whole thing. I tried several combinations of settings and at each iterration I just made things worse, ending up with 'mail battery sound time user power' icons repeating on the top bar. Now I'm lost as to how to restore everything to default settings.

    Read the article

  • Kiosk Mode Coding in Chromium

    - by Aaron
    I don't know how easy this would be, since I don't know anything about it, but I need an Ubuntu setup where the machine boots up, displays the login for a few seconds allowing a chance to log in as an admin, and then precedes to automatically log in to a user account which directly opens Chromium (any other browser is acceptable) in a kiosk mode where only the web content is visible, all Chromium keyboard shortcuts are disabled, and all but a select few websites are blocked, redirecting back to the home page after an "Unauthorized web page" warning comes up if the URL constraint is violated. Is it possible to code a kiosk setup like this, or am I asking for too much? If I'm simply uninformed, and there is already much documentation on anything like this, please redirect me to an appropriate page. If you can code or set up something like my description, please reply with step-by-step instructions, and instructions on how to modify the elements of the kiosk mode. Thank you in advance for any help. (Note: I'm currently using Ubuntu 10.04, but any distribution would work.)

    Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >