power saving - Page 297

Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

- by Gareth

This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to unbutntu 14.04 LTS my printer lHP LaserJet 1018 stopped printing (code=12) Looking through the Forumsthere are several issues with printitng and HPLIP so I was able to troubleshoot this. The steps I took were : Reran HPdoctor Ran hp-check Un-installed and installed the latest version of HPLIP (3.14.4) Checked the USB connections lsusb and lsusb-v Re-ran hpcheck Removed the printer from HPLIP Re-ran hpcheck Manually configued HPLIP to the printer hp-setup-g <xxx:yyy> And this worked HPLIP was able to see the printer in the USB , test page printed and was happily working for a few weeks. Current Issue Printer Not working However today my wife complains the printer is not working and checking see that although HPLIP has the same error code and did not seem to be able to see the printer although running lsusb could see the printer. Initially thought this may be due to usb given a new bus/device after being turned on and off and went to repeat the steps above at the moment still seeing an error in that the HPLIP is complaining that it cannot see the device **error: Device not found. Please make sure your printer is properly connected and powered-on.** current Observations lsusb output ## Bus 002 Device 007: ID 03f0:4117 Hewlett-Packard LaserJet 1018 sudo hp-check output *> "duan@duan-Lenovo-B550:~$ sudo hp-check [sudo] password for duan: Saving output in log file: /home/duan/hp-check.log HP Linux Imaging and Printing System (ver. 3.14.4) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Full Output output of hp-setup -g 002:007 window box "device not found please make sure your printer is properly connected and powered on" duan@duan-Lenovo-B550:~$ sudo hp-setup -g 002:007 [sudo] password for duan: > HP Linux Imaging and Printing System (ver. 3.14.4) Printer/Fax Setup > Utility ver. 9.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This > software comes with ABSOLUTELY NO WARRANTY. This is free software, and > you are welcome to distribute it under certain conditions. See COPYING > file for more details. > > hp-setup[18461]: debug: param=002:007 hp-setup[18461]: debug: > selected_device_name=None Fontconfig error: > "/etc/fonts/conf.d/65-khmer.conf", line 14: out of memory Fontconfig > error: "/etc/fonts/conf.d/65-khmer.conf", line 23: out of memory > Fontconfig error: "/etc/fonts/conf.d/65-khmer.conf", line 32: out of > memory hp-setup[18461]: debug: Sys.argv=['/usr/bin/hp-setup', '-g', > '002:007'] printer_name=None param=002:007 jd_port=1 device_uri=None > remove=False Searching for device... hp-setup[18461]: debug: Trying > USB with bus=002 dev=007... hp-setup[18461]: debug: Not found. > hp-setup[18461]: debug: Trying serial number 002:007 hp-setup[18461]: > debug: Probing bus: usb hp-setup[18461]: debug: Probing bus: par > error: Device not found. Please make sure your printer is properly > connected and powered-on. hp-setup[18461]: debug: Starting GUI loop. .. USB lead Works with the Windows 7 laptop Printer Works with windows 7 laptop Questions Is this a Bug with HPLIP or an issue with laptop/printer? Supplementary question if it is a bug what information is needed and where should it be sent ? Any suggestions on how to get the printer to work correctly with Ubuntu 14.04LTS/HPLIP 13.4.3 so that it stays working ?

Read the article

SQL SERVER – Attach mdf file without ldf file in Database

- by pinaldave

Background Story: One of my friends recently called up and asked me if I had spare time to look at his database and give him a performance tuning advice. Because I had some free time to help him out, I said yes. I asked him to send me the details of his database structure and sample data. He said that since his database is in a very early stage and is small as of the moment, so he told me that he would like me to have a complete database. My response to him was “Sure! In that case, take a backup of the database and send it to me. I will restore it into my computer and play with it.” He did send me his database; however, his method made me write this quick note here. Instead of taking a full backup of the database and sending it to me, he sent me only the .mdf (primary database file). In fact, I asked for a complete backup (I wanted to review file groups, files, as well as few other details). Upon calling my friend, I found that he was not available. Now, he left me with only a .mdf file. As I had some extra time, I decided to checkout his database structure and get back to him regarding the full backup, whenever I can get in touch with him again. Technical Talk: If the database is shutdown gracefully and there was no abrupt shutdown (power outrages, pulling plugs to machines, machine crashes or any other reasons), it is possible (there’s no guarantee) to attach .mdf file only to the server. Please note that there can be many more reasons for a database that is not getting attached or restored. In my case, the database had a clean shutdown and there were no complex issues. I was able to recreate a transaction log file and attached the received .mdf file. There are multiple ways of doing this. I am listing all of them here. Before using any of them, please consult the Domain Expert in your company or industry. Also, never attempt this on live/production server without the presence of a Disaster Recovery expert. USE [master] GO -- Method 1: I use this method EXEC sp_attach_single_file_db @dbname='TestDb', @physname=N'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\TestDb.mdf' GO -- Method 2: CREATE DATABASE TestDb ON (FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\TestDb.mdf') FOR ATTACH_REBUILD_LOG GO Method 2: If one or more log files are missing, they are recreated again. There is one more method which I am demonstrating here but I have not used myself before. According to Book Online, it will work only if there is one log file that is missing. If there are more than one log files involved, all of them are required to undergo the same procedure. -- Method 3: CREATE DATABASE TestDb ON ( FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\TestDb.mdf') FOR ATTACH GO Please read the Book Online in depth and consult DR experts before working on the production server. In my case, the above syntax just worked fine as the database was clean when it was detached. Feel free to write your opinions and experiences for it will help the IT community to learn more from your suggestions and skills. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, Readers Question, SQL, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

GPGPU

WhatGPU obviously stands for Graphics Processing Unit (the silicon powering the display you are using to read this blog post). The extra GP in front of that stands for General Purpose computing.So, altogether GPGPU refers to computing we can perform on GPU for purposes beyond just drawing on the screen. In effect, we can use a GPGPU a bit like we already use a CPU: to perform some calculation (that doesn’t have to have any visual element to it). The attraction is that a GPGPU can be orders of magnitude faster than a CPU.WhyWhen I was at the SuperComputing conference in Portland last November, GPGPUs were all the rage. A quick online search reveals many articles introducing the GPGPU topic. I'll just share 3 here: pcper (ignoring all pages except the first, it is a good consumer perspective), gizmodo (nice take using mostly layman terms) and vizworld (answering the question on "what's the big deal").The GPGPU programming paradigm (from a high level) is simple: in your CPU program you define functions (aka kernels) that take some input, can perform the costly operation and return the output. The kernels are the things that execute on the GPGPU leveraging its power (and hence execute faster than what they could on the CPU) while the host CPU program waits for the results or asynchronously performs other tasks.However, GPGPUs have different characteristics to CPUs which means they are suitable only for certain classes of problem (i.e. data parallel algorithms) and not for others (e.g. algorithms with branching or recursion or other complex flow control). You also pay a high cost for transferring the input data from the CPU to the GPU (and vice versa the results back to the CPU), so the computation itself has to be long enough to justify the overhead transfer costs. If your problem space fits the criteria then you probably want to check out this technology.HowSo where can you get a graphics card to start playing with all this? At the time of writing, the two main vendors ATI (owned by AMD) and NVIDIA are the obvious players in this industry. You can read about GPGPU on this AMD page and also on this NVIDIA page. NVIDIA's website also has a free chapter on the topic from the "GPU Gems" book: A Toolkit for Computation on GPUs.If you followed the links above, then you've already come across some of the choices of programming models that are available today. Essentially, AMD is offering their ATI Stream technology accessible via a language they call Brook+; NVIDIA offers their CUDA platform which is accessible from CUDA C. Choosing either of those locks you into the GPU vendor and hence your code cannot run on systems with cards from the other vendor (e.g. imagine if your CPU code would run on Intel chips but not AMD chips). Having said that, both vendors plan to support a new emerging standard called OpenCL, which theoretically means your kernels can execute on any GPU that supports it. To learn more about all of these there is a website: gpgpu.org. The caveat about that site is that (currently) it completely ignores the Microsoft approach, which I touch on next.On Windows, there is already a cross-GPU-vendor way of programming GPUs and that is the DirectX API. Specifically, on Windows Vista and Windows 7, the DirectX 11 API offers a dedicated subset of the API for GPGPU programming: DirectCompute. You use this API on the CPU side, to set up and execute the kernels that run on the GPU. The kernels are written in a language called HLSL (High Level Shader Language). You can use DirectCompute with HLSL to write a "compute shader", which is the term DirectX uses for what I've been referring to in this post as a "kernel". For a comprehensive collection of links about this (including tutorials, videos and samples) please see my blog post: DirectCompute.Note that there are many efforts to build even higher level languages on top of DirectX that aim to expose GPGPU programming to a wider audience by making it as easy as today's mainstream programming models. I'll mention here just two of those efforts: Accelerator from MSR and Brahma by Ananth. Comments about this post welcome at the original blog.

Read the article

RegexClean Transformation

Use the power of regular expressions to cleanse your data right there inside the Data Flow. This transformation includes a full user interface for simple configuration, as well as advanced features such as error output configuration. Two regular expressions are used, a match expression and a replace expression. The transformation is designed around the named capture groups or match groups, and even supports multiple expressions. This allows for rich and complex expressions to be built, all through an easy to reuse transformation where a bespoke Script Component was previously the only alternative. Some simple properties are available for each column selected – Behaviour The two behaviour modes offer similar functionality but with a difference. Replace, replaces tokens with the input, and Emit overwrites the whole string. Cascade Cascade allows you to define multiple expressions, each on a new line. The match expression will be processed into one operation per line, which are then processed in order at run-time. Multiple replace expressions can also be specified, again each on a new line. If there is no corresponding replace expression for a match expression line, then the last replace expression will be used instead. It is common to have multiple match expressions, but only a single replace expression. Match Expression The expression used to define the named capture groups. This is where you can analyse the data, and tag or name elements within it as found by the match expression. Replace Expression The replace determines the final output. It will reference the named groups from the match expression and assembles them into the final output. If you want to use regular expressions to validate data then try the Regular Expression Transformation. Quick Start Guide Select a column. A new output column is created for each selected column; there is no option for in-place replacement of column values. One input column can be used to populate multiple output columns, just select the column again in the lower grid, using the Input Columns drop-down selector. Amend the output column name and size as required. They default to the same as the input column selected. Amend the behaviour as required, the default is Replace. Amend the cascade option as required, the default is true. Finally enter your match and replace regular expressions Quick Sample #1 Parse an email address and extract the user and domain portions. Format as a web address passing the user portion as a URL parameter. This uses two match groups, user and host, which correspond to the text before the @ and after it respectively. Behaviour is Emit, and cascade of false, we only have a single match expression. Match Expression ^(?<user>[^@]+)@(?<host>.+)$ Replace Expression - http://www.${host}?user=${user} Results Sample Input Sample Output [email protected] http://www.adventure-works.com?user=zheng0 The component is provided as an MSI file, however to complete the installation, you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the RegexClean Transformation from the list. Downloads The RegexClean Transformation is available for both SQL Server 2005 and SQL Server 2008. Please choose the version to match your SQL Server version, or you can install both versions and use them side by side if you have both SQL Server 2005 and SQL Server 2008 installed. RegexClean Transformation for SQL Server 2005 RegexClean Transformation for SQL Server 2008 Version History SQL Server 2005 Version 1.0.0.105 - Public Release (28 Jan 2008) SQL Server 2005 Version 1.0.0.105 - Public Release (28 Jan 2008) Screenshot

Read the article

SQL SERVER – 2012 – All Download Links in Single Page – SQL Server 2012

- by pinaldave

SQL Server 2012 RTM is just announced and recently I wrote about all the SQL Server 2012 Certification on single page. As a feedback, I received suggestions to have a single page where everything about SQL Server 2012 is listed. I will keep this page updated as new updates are announced. Microsoft SQL Server 2012 Evaluation Microsoft SQL Server 2012 enables a cloud-ready information platform that will help organizations unlock breakthrough insights across the organization. Microsoft SQL Server 2012 Express Microsoft SQL Server 2012 Express is a powerful and reliable free data management system that delivers a rich and reliable data store for lightweight Web Sites and desktop applications. Microsoft SQL Server 2012 Feature Pack The Microsoft SQL Server 2012 Feature Pack is a collection of stand-alone packages which provide additional value for Microsoft SQL Server 2012. Microsoft SQL Server 2012 Report Builder Report Builder provides a productive report-authoring environment for IT professionals and power users. It supports the full capabilities of SQL Server 2012 Reporting Services. Microsoft SQL Server 2012 Master Data Services Add-in For Microsoft Excel The Master Data Services Add-in for Excel gives multiple users the ability to update master data in a familiar tool without compromising the data’s integrity in Master Data Services. Microsoft SQL Server 2012 Performance Dashboard Reports The SQL Server 2012 Performance Dashboard Reports are Reporting Services report files designed to be used with the Custom Reports feature of SQL Server Management Studio. Microsoft SQL Server 2012 PowerPivot for Microsoft Excel® 2010 Microsoft PowerPivot for Microsoft Excel 2010 provides ground-breaking technology; fast manipulation of large data sets, streamlined integration of data, and the ability to effortlessly share your analysis through Microsoft SharePoint. Microsoft SQL Server 2012 Reporting Services Add-in for Microsoft SharePoint Technologies 2010 The SQL Server 2012 Reporting Services Add-in for Microsoft SharePoint 2010 technologies allows you to integrate your reporting environment with the collaborative SharePoint 2010 experience. Microsoft SQL Server 2012 Semantic Language Statistics The Semantic Language Statistics Database is a required component for the Statistical Semantic Search feature in Microsoft SQL Server 2012 Semantic Language Statistics. Microsoft ®SQL Server 2012 FileStream Driver – Windows Logo Certification Catalog file for Microsoft SQL Server 2012 FileStream Driver that is certified for WindowsServer 2008 R2. It meets Microsoft standards for compatibility and recommended practices with the Windows Server 2008 R2 operating systems. Microsoft SQL Server StreamInsight 2.0 Microsoft StreamInsight is Microsoft’s Complex Event Processing technology to help businesses create event-driven applications and derive better insights by correlating event streams from multiple sources with near-zero latency. Microsoft JDBC Driver 4.0 for SQL Server Download the Microsoft JDBC Driver 4.0 for SQL Server, a Type 4 JDBC driver that provides database connectivity through the standard JDBC application program interfaces (APIs) available in Java Platform, Enterprise Edition 5 and 6. Data Quality Services Performance Best Practices Guide This guide focuses on a set of best practices for optimizing performance of Data Quality Services (DQS). Microsoft Drivers 3.0 for SQL Server for PHP The Microsoft Drivers 3.0 for SQL Server for PHP provide connectivity to Microsoft SQLServer from PHP applications. Product Documentation for Microsoft SQL Server 2012 for firewall and proxy restricted environments The Microsoft SQL Server 2012 setup installs only the Help Viewer…install any documentation. All of the SQL Server documentation is available online. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

SQL SERVER – Beginning of SQL Server Architecture – Terminology – Guest Post

- by pinaldave

SQL Server Architecture is a very deep subject. Covering it in a single post is an almost impossible task. However, this subject is very popular topic among beginners and advanced users. I have requested my friend Anil Kumar who is expert in SQL Domain to help me write a simple post about Beginning SQL Server Architecture. As stated earlier this subject is very deep subject and in this first article series he has covered basic terminologies. In future article he will explore the subject further down. Anil Kumar Yadav is Trainer, SQL Domain, Koenig Solutions. Koenig is a premier IT training firm that provides several IT certifications, such as Oracle 11g, Server+, RHCA, SQL Server Training, Prince2 Foundation etc. In this Article we will discuss about MS SQL Server architecture. The major components of SQL Server are: Relational Engine Storage Engine SQL OS Now we will discuss and understand each one of them. 1) Relational Engine: Also called as the query processor, Relational Engine includes the components of SQL Server that determine what your query exactly needs to do and the best way to do it. It manages the execution of queries as it requests data from the storage engine and processes the results returned. Different Tasks of Relational Engine: Query Processing Memory Management Thread and Task Management Buffer Management Distributed Query Processing 2) Storage Engine: Storage Engine is responsible for storage and retrieval of the data on to the storage system (Disk, SAN etc.). to understand more, let’s focus on the following diagram. When we talk about any database in SQL server, there are 2 types of files that are created at the disk level – Data file and Log file. Data file physically stores the data in data pages. Log files that are also known as write ahead logs, are used for storing transactions performed on the database. Let’s understand data file and log file in more details: Data File: Data File stores data in the form of Data Page (8KB) and these data pages are logically organized in extents. Extents: Extents are logical units in the database. They are a combination of 8 data pages i.e. 64 KB forms an extent. Extents can be of two types, Mixed and Uniform. Mixed extents hold different types of pages like index, System, Object data etc. On the other hand, Uniform extents are dedicated to only one type. Pages: As we should know what type of data pages can be stored in SQL Server, below mentioned are some of them: Data Page: It holds the data entered by the user but not the data which is of type text, ntext, nvarchar(max), varchar(max), varbinary(max), image and xml data. Index: It stores the index entries. Text/Image: It stores LOB ( Large Object data) like text, ntext, varchar(max), nvarchar(max), varbinary(max), image and xml data. GAM & SGAM (Global Allocation Map & Shared Global Allocation Map): They are used for saving information related to the allocation of extents. PFS (Page Free Space): Information related to page allocation and unused space available on pages. IAM (Index Allocation Map): Information pertaining to extents that are used by a table or index per allocation unit. BCM (Bulk Changed Map): Keeps information about the extents changed in a Bulk Operation. DCM (Differential Change Map): This is the information of extents that have modified since the last BACKUP DATABASE statement as per allocation unit. Log File: It also known as write ahead log. It stores modification to the database (DML and DDL). Sufficient information is logged to be able to: Roll back transactions if requested Recover the database in case of failure Write Ahead Logging is used to create log entries Transaction logs are written in chronological order in a circular way Truncation policy for logs is based on the recovery model SQL OS: This lies between the host machine (Windows OS) and SQL Server. All the activities performed on database engine are taken care of by SQL OS. It is a highly configurable operating system with powerful API (application programming interface), enabling automatic locality and advanced parallelism. SQL OS provides various operating system services, such as memory management deals with buffer pool, log buffer and deadlock detection using the blocking and locking structure. Other services include exception handling, hosting for external components like Common Language Runtime, CLR etc. I guess this brief article gives you an idea about the various terminologies used related to SQL Server Architecture. In future articles we will explore them further. Guest Author The author of the article is Anil Kumar Yadav is Trainer, SQL Domain, Koenig Solutions. Koenig is a premier IT training firm that provides several IT certifications, such as Oracle 11g, Server+, RHCA, SQL Server Training, Prince2 Foundation etc. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

Read the article

JustMock and Moles – A short overview for TDD alpha geeks

- by RoyOsherove

People have been lurking near my house, asking me to write something about Moles and JustMock, so I’ll try to be as objective as possible, taking in the fact that I work at Typemock. If I were NOT working at Typemock I’d write: JustMock JustMock tries to be Typemock at so many levels it’s not even funny. Technically they work the same and the API almost looks like it’s a search and replace work based on the Isolator API (awesome compliment!), but JustMock still has too many growing pains and bugs to be usable. Also, JustMock is missing alot of the legacy abilities such as Non public faking, faking all types and various other things that are really needed in real legacy code. Biggest thing (in terms of isolation integration) is that it does not integrate with other profilers such as coverage, NCover etc.) When JustMock comes out of beta, I feel that it should cost about half as Isolator costs, as it currently provides about half the abilities. Moles Moles is an addon of Pex and was originally only intended to work within the Pex environment. It started as a research project and now it’s a power-tool for VS (so it’s a separate install) Now it’s it’s own little stubbing framework. It’s not really an Isolation framework in the classic sense, because it does not provide any kind of API built in to verify object interactions. You have to use manual flags all on your own to do that. It generates two types of classes per assembly: Manual Stubs(just like you’d hand code them) and Mole classes. Each Mole class is a special API to change and break the behavior that the corresponding type. so MDateTime is how you change behavior for DateTime. In that sense the API is al over the place, and it can become highly unreadable and unmentionable over time in your test. Also, the Moles API isn’t really designed to deal with real Legacy code. It only deals with public types and methods. anything internal or private is ignored and you can’t change its behavior. You also can’t control static constructors. That takes about 95% of legacy scenarios out of the picture if that’s what you’re trying to use it for. Personally, I found it hard to get used to the idea of two parallel APIs for different abilities, and when to choose which. and I know this stuff. I would expect more usability from the API to make it more widely used. I don’t think that Moles in planning to go that route. Publishing it as an Isolation framework is really an afterthought of a tool that was design with a specific task in mind, and generic Isolation isn’t it. it’s only hope is DEQ – a simple code example that shows a simple Isolation API built on the Moles generic engine. Moles can and should be used for very simple cases of detouring functionality such a simple static methods or interfaces and virtual functions (like rhinomock and MOQ do). Oh, Wait. Ah, good thing I work at Typemock. I won’t write all that. I’ll just write: JustMock and Moles are great tools that enlarge the market space for isolation related technologies, and they prove that the idea of productivity and unit testing can go hand in hand and get people hooked. I look forward to compete with them at this growing market.

Read the article

Azure – Part 6 – Blob Storage Service

- by Shaun

When migrate your application onto the Azure one of the biggest concern would be the external files. In the original way we understood and ensure which machine and folder our application (website or web service) is located in. So that we can use the MapPath or some other methods to read and write the external files for example the images, text files or the xml files, etc. But things have been changed when we deploy them on Azure. Azure is not a server, or a single machine, it’s a set of virtual server machine running under the Azure OS. And even worse, your application might be moved between thses machines. So it’s impossible to read or write the external files on Azure. In order to resolve this issue the Windows Azure provides another storage serviec – Blob, for us. Different to the table service, the blob serivce is to be used to store text and binary data rather than the structured data. It provides two types of blobs: Block Blobs and Page Blobs. Block Blobs are optimized for streaming. They are comprised of blocks, each of which is identified by a block ID and each block can be a maximum of 4 MB in size. Page Blobs are are optimized for random read/write operations and provide the ability to write to a range of bytes in a blob. They are a collection of pages. The maximum size for a page blob is 1 TB. In the managed library the Azure SDK allows us to communicate with the blobs through these classes CloudBlobClient, CloudBlobContainer, CloudBlockBlob and the CloudPageBlob. Similar with the table service managed library, the CloudBlobClient allows us to reach the blob service by passing our storage account information and also responsible for creating the blob container is not exist. Then from the CloudBlobContainer we can save or load the block blobs and page blobs into the CloudBlockBlob and the CloudPageBlob classes. Let’s improve our exmaple in the previous posts – add a service method allows the user to upload the logo image. In the server side I created a method name UploadLogo with 2 parameters: email and image. Then I created the storage account from the config file. I also add the validation to ensure that the email passed in is valid. 1: var storageAccount = CloudStorageAccount.FromConfigurationSetting("DataConnectionString"); 2: var accountContext = new DynamicDataContext<Account>(storageAccount); 3: 4: // validation 5: var accountNumber = accountContext.Load() 6: .Where(a => a.Email == email) 7: .ToList() 8: .Count; 9: if (accountNumber <= 0) 10: { 11: throw new ApplicationException(string.Format("Cannot find the account with the email {0}.", email)); 12: } Then there are three steps for saving the image into the blob service. First alike the table service I created the container with a unique name and create it if it’s not exist. 1: // create the blob container for account logos if not exist 2: CloudBlobClient blobStorage = storageAccount.CreateCloudBlobClient(); 3: CloudBlobContainer container = blobStorage.GetContainerReference("account-logo"); 4: container.CreateIfNotExist(); Then, since in this example I will just send the blob access URL back to the client so I need to open the read permission on that container. 1: // configure blob container for public access 2: BlobContainerPermissions permissions = container.GetPermissions(); 3: permissions.PublicAccess = BlobContainerPublicAccessType.Container; 4: container.SetPermissions(permissions); And at the end I combine the blob resource name from the input file name and Guid, and then save it to the block blob by using the UploadByteArray method. Finally I returned the URL of this blob back to the client side. 1: // save the blob into the blob service 2: string uniqueBlobName = string.Format("{0}_{1}.jpg", email, Guid.NewGuid().ToString()); 3: CloudBlockBlob blob = container.GetBlockBlobReference(uniqueBlobName); 4: blob.UploadByteArray(image); 5: 6: return blob.Uri.ToString(); Let’s update a bit on the client side application and see the result. Here I just use my simple console application to let the user input the email and the file name of the image. If it’s OK it will show the URL of the blob on the server side so that we can see it through the web browser. Then we can see the logo I’ve just uploaded through the URL here. You may notice that the blob URL was based on the container name and the blob unique name. In the document of the Azure SDK there’s a page for the rule of naming them, but I think the simple rule would be – they must be valid as an URL address. So that you cannot name the container with dot or slash as it will break the ADO.Data Service routing rule. For exmaple if you named the blob container as Account.Logo then it will throw an exception says 400 Bad Request. Summary In this short entity I covered the simple usage of the blob service to save the images onto Azure. Since the Azure platform does not support the file system we have to migrate our code for reading/writing files to the blob service before deploy it to Azure. In order to reducing this effort Microsoft provided a new approch named Drive, which allows us read and write the NTFS files just likes what we did before. It’s built up on the blob serivce but more properly for files accessing. I will discuss more about it in the next post. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Making a Job Change That's Easy Why Not Try a Career Change

- by david.talamelli

A few nights ago I received a comment on one of our blog posts that reminded me of a statistic that I heard a while back. The statistic reflected the change in our views towards work and showed how while people in past generations would stay in one role for their working career - now with so much choice people not only change jobs often but also change careers 4-5 times in their working life. To differentiate between a job change and a career change: when I say job change this could be an IT Sales person moving from one IT Sales role to another IT Sales role. A Career change for example would be that same IT Sales person moving from IT Sales to something outside the scope of their industry - maybe to something like an Engineer or Scuba Dive Instructor. The reason for Career changes can be as varied as the people who make them. Someone's motivation could be to pursue a passion or maybe there is a change in their personal circumstances forcing the change or it could be any other number of reasons. I think it takes courage to make a Career change - it can be easy to stay in your comfort zone and do what you know, but to really push yourself sometimes you need to try something new, it is a matter of making that career transition as smooth as possible for yourself. The comment that was posted is here below (thanks Dean for the kind words they are appreciated). Hi David, I just wanted to let you know that I work for a company called Milestone Search in Melbourne, Victoria Australia. (www.mstone.com.au) We subscribe to your feed on a daily basis and find your blogs both interesting and insightful. Not to mention extremely entertaining. I wonder if you have missed out on getting in journalism as this seems to be something you'd be great at ?: ) Anyways back to my point about changing careers. This could be anything from going from I.T. to Journalism, Engineering to Teaching or any combination of career you can think of. I don't think there ever has been a time where we have had so many opportunities to do so many different things in our working life. While this idea sounds great in theory, putting it into practice would be much harder to do I think. First, in an increasingly competitive job market, employers tend to look for specialists in their field. You may want to make a change but your options may be limited by the number of employers willing to take a chance on someone new to an industry that will likely require a significant investment in time to get brought up to speed. Also, using myself as an example if I was given the opportunity to move into Journalism/Communication/Marketing career from my career as an IT Recruiter - realistically I would have to take a significant pay cut to make this change as my current salary reflects the expertise I have in my current career. I would not immediately be up to speed moving into a new career and would not be able to justify a similar salary. Yes there are transferable skills in any career change, but even though you may have transferable skills you must realise that you will also have a large amount of learning to do which would take time. These are two initial hurdles that I immediately think of, there may be more but nothing is insurmountable. If you work out what you want to do with your working career whatever that may be, you then need to just need to work out the steps to get to your end goal. This is where utilising the power of your networks and using Social Media can come in handy. If you are interested in working somewhere why not proactively take the opportunity to research the industry or company - find out who it is you need to speak to and get in touch with them. We spend so much time working, we should enjoy the work we do and not be afraid to try new things. Waiting for your dream job to fall into your lap or be handed to you on a silver platter is not likely going to happen, so if there is something you do want to do, work out a plan to make it happen and chase after it. This article was originally posted on David Talamelli's Blog - David's Journal on Tap

Read the article

Using the “Settings.settings” functionalities in VB.NET can be tricky…

- by Vincent Grondin

Sometime you’re searching for something forever and when you find it, you realize it was right under your nose. Maybe you were distracted by other things around… or maybe that thing right under your nose was so well hidden that it deserves a blog post… That happened to me a few days ago while using the “Settings.settings” functionalities in my VB.NET application… I thought it was a cool feature and I decided to use it… So there I am adding new settings with “USER” scope and StringCollection as the data type, testing my application and everything works perfectly fine... That was before I decided to modify the “Value” of one of my settings… After changing the value of one of my settings, I start my application again and, to my surprise, my new values aren’t showing! Hmmm… That’s odd… My setting was a pretty long list of strings so I was rather angry at myself for not saving my work after I was done… So I open up the Settings.setting in the designer and click the ellipsis symbol to enter my string collection again, but to my great pleasure (and disbelief) my strings are there!!! Alright, you rock VB.NET! You’ve just save me a bunch of typing time and I’m thinking it’s just a simple Visual Studio glitch… I hit “Save” then “Save All” (just in case) and finally I rebuild everything and fire up my app once again. Huh? Where are my darn strings???????? Ok there’s a bug there… I open up the app.config and my new strings are there!!! Alright, let’s recap… My new strings are in the app.config, they show correctly in the Settings.settings designer UI but they aren’t showing at runtime… Hmmmm? Let’s try something else… Let’s start the application but outside Visual Studio this time… I fire up the exe and BAM! My strings where there! I “alt-tab” and hit “F5” and BOOM, no strings! So it’s a bug in the Visual Studio environment… or could it be a FEATURE? I must admit that I’m a little confused over what’s a bug and what’s a feature in Visual Studio… lol! Finally I found out there’s a “cache” for your Visual Studio located here: C:\Users\<your username>\AppData\Local\Microsoft\<your app name and a very weird temp ID>\<your app version>\user.config When using the “Settings.settings” with a setting of scope “user”, this file is out of sync with your app.config until you manually decide to update it… The button is right there… under your nose… at the top left corner of your screen in the settings designer… See the big “Synchronize” button there? Yep… Now that’s user friendly isn’t it? Oh, and wait until you see what it does when you click it… It prompts you and basically says: “Would you like your settings to start working inside Visual Studio now that you found out that I exist?” and of course the right answer is yes… or rather “OK”… Unfortunately, you have to do this every time you edit a value… On the other hand, adding and removing settings seem to work flawlessly without having to click this magical button… go figure! Oh and I almost forgot… this great “feature” is only available for VB.NET… A project in C# using Settings.settings will work perfectly EVEN when editing values… Here’s a screenshot that shows this important button: Button Using other data types appears to work perfectly well… Maybe it’s simply related to the StringCollection data type? If you are a VB.NET programmer, you should pay attention to this when you plan on using the settings functionalities and your scope is “user” and your data type is StringCollection… Happy coding all!

Read the article

Java Spotlight Episode 57: Live From #Devoxx - Ben Evans and Martijn Verburg of the London JUG with Yara Senger of SouJava

- by Roger Brinkley

Tweet Live from Devoxx 11, an interview with Ben Evans and Martijn Verburg from the London JUG along with Yara Senger from the SouJava JUG on the JCP Executive Committee Elections, JSR 248, and Adopt-a-JSR program. Both the London JUG and SouJava JUG are JCP Standard Edition Executive Committee Members. Joining us this week on the Java All Star Developer Panel are Geertjan Wielenga, Principal Product Manger in Oracle Developer Tools; Stephen Chin, Java Champion and Java FX expert; and Antonio Goncalves, Paris JUG leader. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link: Java Spotlight Podcast in iTunes. Show Notes News Netbeans 7.1 JDK 7 upgrade tools Netbeans First Patch Program OpenJFX approved as an OpenJDK project Devoxx France April 18-20, 2012 Events Nov 22-25, OTN Developer Days in the Nordics Nov 22-23, Goto Conference, Prague Dec 6-8, Java One Brazil, Sao Paulo Feature interview Ben Evans has lived in "Interesting Times" in technology - he was the lead performance testing engineer for the Google IPO, worked on the initial UK trials of 3G networks with BT, built award-winning websites for some of Hollywood's biggest hits of the 90s, rearchitected and reimagined technology helping some of the most vulnerable people in the UK and has worked on everything from some of the UKs very first ecommerce sites, through to multi-billion dollar currency trading systems. He helps to run the London Java Community, and represents the JUG on the Java SE/EE Executive Committee. His first book "The Well-Grounded Java Developer" (with Martijn Verburg) has just been published by Manning. Martijn Verburg (aka 'the Diabolical Developer') herds Cats in the Java/open source communities and is constantly humbled by the creative power to be found there. Currently he resides in London where he co-leads the London JUG (a JCP EC member), runs a couple of open source projects & drinks too much beer at his local pub. You can find him online moderating at the Javaranch or discussing (ranting?) subjects on the Prgorammers Stack Exchange site. Most recently he's become a regular speaker at conferences on Java, open source and software development and has recently wrapped up his first Manning title - "The Well-Grounded Java Developer" with his co-author Ben Evans. Yara Senger is the partner and director of teacher education and Globalcode, graduated from the University of Sao Paulo, Sao Carlos, has significant experience in Brazil and abroad in developing solutions to critical Java. She is the co-creator of Java programs Academy and Academy of Web Developer, accumulating over 1000 hours in the classroom teaching Java. She currently serves as the President of Sou Java. In this interview Ben, Martijn, and Yara talk about the JCP Executive Committee Elections, JSR 348, and the Adopt-a-JSR program. Mail Bag What's Cool Show Transcripts Transcript for this show is available here when available.

Read the article

On Contract Employment

- by kerry

I am going to post about something I don’t post about a lot, the business side of development. Scott at the antipimp does a good job of explaining how contracts work from a business perspective. I am going to give a view from the ground. First, a little background on myself. I have recently taken a 6 month contract after about 8 years of fulltime employment. I have 2 kids, and a stay at home wife. I took this contract opportunity because I wanted to try it on for size. I have always wondered whether I would like doing contracts over fulltime employment. So, in keeping with the theme of this blog I will write this down now so that I may reference it later. ALL jobs are temporary! Right now you may not realize it, most people simply ignore it, but EVERY job is temporary. Everyone should be planning for life after the money stops coming in. Sadly, most people do not. Contracting pushes this issue to the forefront, making you deal with it. After a month on a contract, I am happy to say that I am saving more than I ever saved in a fulltime position. Hopefully, I will be ready in case of an extended window of unemployment between contracts. Networking I find it extremely gratifying getting to know people. It is especially beneficial when moving to a new city. What better way to go out and meet people in your field than to work a few contracts? 6 months of working beside someone and you get to know them pretty well. This is one of my favorite aspects. Technical Agility Moving between IS shops takes (or molds you into) a flexible person. You have to be able to go in and hit the ground running. This means you need to be able to sit down and start work on a large codebase working in a language that you may or may not have that much experience in. It is also an excellent way to learn new languages and broaden your technical skill set. I took my current position to learn Ruby. A month ago, I had only used it in passing, but now I am using it every day. It’s a tragedy in this field when people start coding for the joy and love of coding, then become deeply entrenched in their companies methods and technologies that it becomes a just a job. Less Stress I am not talking about the kind of stress you get from a jackass boss. I am talking about the kind of stress I (or others) experience about planning and future proofing your code. Not saying I stay up at night worrying whether we have done it right, if that code I wrote today is going to bite me later, but it still creeps around in the dark recesses of my mind. Careful though, I am not suggesting you write sloppy code; just defer any large architectural or design decisions to the ‘code owners’. Flexible Scheduling It makes me very happy to be able to cut out a few hours early on a Friday (provided the work is done) and start the weekend off early by going to the pool, or taking the kids to the park. Contracting provides you this opportunity (mileage may vary). Most of your fulltime brethren will not care, they will be jealous that they’re corporate policy prevents them from doing the same. However, you must be mindful of situations where this is not appropriate, and don’t over do it. You are there to work after all. Affirmation of Need Have you ever been stuck in a job where you thought you were underpaid? Have you ever been in a position where you felt like there was not enough workload for you? This is not a problem for contractors. When you start a contract it is understood that you are needed, and the employer knows that you are happy with the terms. Contracting may not be for everyone. But, if you develop a relationship with a good consulting firm, keep their clients happy, then they will keep you happy. They want you to work almost as much as you do. Just be sure and plan financially for any windows of unemployment.

Read the article

Knockoutjs - stringify to handling observables and custom events

- by Renso

Goal: Once you viewmodel has been built and populated with data, at some point it goal of it all is to persist the data to the database (or some other media). Regardless of where you want to save it, your client-side viewmodel needs to be converted to a JSON string and sent back to the server. Environment considerations: jQuery 1.4.3+ Knockoutjs version 1.1.2 How to: So let’s set the stage, you are using Knockoutjs and you have a viewmodel with some Knockout dependencies. You want to make sure it is in the proper JSON format and via ajax post it to the server for persistence. First order of business is to deal with the viewmodel (JSON) object. To most the JSON stringifier sounds familiar. The JSON stringifier converts JavaScript data structures into JSON text. JSON does not support cyclic data structures, so be careful to not give cyclical structures to the JSON stringifier. You may ask, is this the best way to do it? What about those observables and other Knockout properties that I don’t want to persist or want their actual value persisted and not their function, etc. Not sure if you were aware, but KO already has a method; ko.utils.stringifyJson() - it's mostly just a wrapper around JSON.stringify. (which is native in some browsers, and can be made available by referencing json2.js in others). What does it do that the regular stringify does not is that it automatically converts observable, dependentObservable, or observableArray to their underlying value to JSON. Hold on! There is a new feature in this version of Knockout, the ko.toJSON. It is part of the core library and it will clone the view model’s object graph, so you don’t mess it up after you have stringified it and unwrap all its observables. It's smart enough to avoid reference cycles. Since you are using the MVVM pattern it would assume you are not trying to reference DOM nodes from your view. Wait a minute. I can already see this info on the http://knockoutjs.com/examples/contactsEditor.html website, why mention it all here? First of this is a much nicer blog, no orange ? At this time, you may want to have a look at the blog and see what I am talking about. See the save event, how they stringify the view model’s contacts only? That’s cool but what if your view model is a representation of your object you want to persist, meaning it has no property that represents the json object you want to persist, it is the view model itself. The example in http://knockoutjs.com/examples/contactsEditor.html assumes you have a list of contacts you may want to persist. In the example here, you want to persist the view model itself. The viewmodel here looks something like this: var myViewmodel = { accountName: ko.observable(""), accountType: ko.observable("Active") }; myViewmodel.isItActive = ko.dependentObservable(function () { return myViewmodel.accountType() == "Active"; }); myViewmodel.clickToSaveMe = function() { SaveTheAccount(); }; Here is the function in charge of saving the account: Function SaveTheAccount() { $.ajax({ data: ko.toJSON(viewmodel), url: $('#ajaxSaveAccountUrl').val(), type: "POST", dataType: "json", async: false, success: function (result) { if (result && result.Success == true) { $('#accountMessage').html('<span class="fadeMyContainerSlowly">The account has been saved</span>').show(); FadeContainerAwaySlowly(); } }, error: function (xmlHttpRequest, textStatus, errorThrown) { alert('An error occurred: ' + errorThrown); } }); //ajax }; Try run this and your browser will eventually freeze up or crash. Firebug will tell you that you have a repetitive call to the first function call in your model that keeps firing infinitely. What is happening is that Knockout serializes the view model to a JSON string by traversing the object graph and firing off the functions, again-and-again. Not sure why it does that, but it does. So what is the work around: Nullify your function calls and then post it: var lightweightModel = viewmodel.clickToSaveMe = null; data: ko.toJSON(lightweightModel), So then I traced the JSON string on the server and found it having issues with primitive types. C#, by the way. So I changed ko.toJSON(model) to ko.toJS(model), and that solved my problem. Of course you could just create a property on the viewmodel for the account itself, so you only have to serialize the property and not the entire viewmodel. If that is an option then that would be the way to go. If your view model contains other properties in the view model that you also want to post then that would not be an option and then you’ll know what to watch out for. Hope this helps.

Read the article

Oracle’s New Memory-Optimized x86 Servers: Getting the Most Out of Oracle Database In-Memory

- by Josh Rosen, x86 Product Manager-Oracle

With the launch of Oracle Database In-Memory, it is now possible to perform real-time analytics operations on your business data as it exists at that moment – in the DRAM of the server – and immediately return completely current and consistent data. The Oracle Database In-Memory option dramatically accelerates the performance of analytics queries by storing data in a highly optimized columnar in-memory format. This is a truly exciting advance in database technology.As Larry Ellison mentioned in his recent webcast about Oracle Database In-Memory, queries run 100 times faster simply by throwing a switch. But in order to get the most from the Oracle Database In-Memory option, the underlying server must also be memory-optimized. This week Oracle announced new 4-socket and 8-socket x86 servers, the Sun Server X4-4 and Sun Server X4-8, both of which have been designed specifically for Oracle Database In-Memory. These new servers use the fastest Intel® Xeon® E7 v2 processors and each subsystem has been designed to be the best for Oracle Database, from the memory, I/O and flash technologies right down to the system firmware.Amongst these subsystems, one of the most important aspects we have optimized with the Sun Server X4-4 and Sun Server X4-8 are their memory subsystems. The new In-Memory option makes it possible to select which parts of the database should be memory optimized. You can choose to put a single column or table in memory or, if you can, put the whole database in memory. The more, the better. With 3 TB and 6 TB total memory capacity on the Sun Server X4-4 and Sun Server X4-8, respectively, you can memory-optimize more, if not your entire database. Sun Server X4-8 CMOD with 24 DIMM slots per socket (up to 192 DIMM slots per server) But memory capacity is not the only important factor in selecting the best server platform for Oracle Database In-Memory. As you put more of your database in memory, a critical performance metric known as memory bandwidth comes into play. The total memory bandwidth for the server will dictate the rate in which data can be stored and retrieved from memory. In order to achieve real-time analysis of your data using Oracle Database In-Memory, even under heavy load, the server must be able to handle extreme memory workloads. With that in mind, the Sun Server X4-8 was designed with the maximum possible memory bandwidth, providing over a terabyte per second of total memory bandwidth. Likewise, the Sun Server X4-4 also provides extreme memory bandwidth in an even more compact form factor with over half a terabyte per second, providing customers with scalability and choice depending on the size of the database.Beyond the memory subsystem, Oracle’s Sun Server X4-4 and Sun Server X4-8 systems provide other key technologies that enable Oracle Database to run at its best. The Sun Server X4-4 allows for up 4.8 TB of internal, write-optimized PCIe flash while the Sun Server X4-8 allows for up to 6.4 TB of PCIe flash. This enables dramatic acceleration of data inserts and updates to Oracle Database. And with the new elastic computing capability of Oracle’s new x86 servers, server performance can be adapted to your specific Oracle Database workload to ensure that every last bit of processing power is utilized.Because Oracle designs and tests its x86 servers specifically for Oracle workloads, we provide the highest possible performance and reliability when running Oracle Database. To learn more about Sun Server X4-4 and Sun Server X4-8, you can find more details including data sheets and white papers here. Josh Rosen is a Principal Product Manager for Oracle’s x86 servers, focusing on Oracle’s operating systems and software. He previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

Read the article

Oracle BI and XS Energy Drinks – Don’t Miss the Amway Presentation!

- by Michelle Kimihira

By Maria Forney Amway is a global leader in the direct sales industry with $10.9B in annual sales in more than 100 countries and territories. The company has implemented a global BI framework that provides accurate, consistent, and timely insights to support global, regional and local analytical research, business planning, performance measurement and assessment. Oracle BI EE is used by 1500 employees across Amway sales, marketing, finance, and supply chain business units as well as Amway affiliates in Europe, Russia, South Africa, Japan, Australia, Latin America, Malaysia, Vietnam, and Indonesia. Last week, I spoke with Lead Data Analyst with Amway Global Sales, Dan Arganbright, and IT Manager with Amway BI Competency Center, Mike Olson, about their upcoming presentation at Oracle OpenWorld in San Francisco. Scheduled during a prime speaking slot on Monday, October 1 at 12:15pm in Moscone West, 2007, Dan and Mike will discuss their experience building Amway’s Distributor Consulting solution, powered by Oracle BI EE. You can find more information here. As background, Amway offers people an opportunity to own their own businesses and consumers exclusive products in health and wellness, beauty and home care. The Amway internal Sales organization is charged with consulting leadership-level Distributors to help them with data insights and ultimately grow their business. Until recently, this was a resource-intense process of gathering and formatting data. In some markets, it took over 40 hours to collect the data and produce the analysis needed for one consultation session. Amway began its global BI journey in 2006 and since then the company has migrated from having multiple technology providers and integration points to an integrated strategic vendor approach. Today, the company has standardized on Oracle technology for BI. Amway has achieved cost savings through the retirement of redundant technology platforms. In addition, Mike’s organization has led the charge to align disparate BI organizations into a BI Competency Center. The following diagram highlights the simplicity of the standardized architecture of Amway today. Dubbed Distributor Consulting, Amway has developed a BI solution using the Oracle technology stack to help Distributor leaders grow their businesses. The Distributor Consulting solution provides over 40 metrics for Sales staff to provide data-driven insights on the Distributors and organizations they support. Using Oracle BI EE, Exadata, and Oracle Data Integrator, Amway provides customized and personalized business intelligence, and the Oracle BI EE dashboards were developed by the Amway Sales organization, which demonstrates business empowerment of the technology. Amway is also leveraging the power of BI to drive business growth in all of its markets. A new set of Distributor Segmentation metrics are enabling a better understanding of distributor behaviors. A Global Scorecard that Amway developed provides key metrics at a market and global level for executive-level discussions. Product Analysis teams can now highlight repeat purchase rates, product penetration and the success of CRM campaigns. In the words of Dan and Mike, the addition of Exadata 11 months ago has been “a game changer.” Amway has been able to dramatically reduce complexity, improve performance and increase business productivity and cost savings. For example, the number of indexes on the global data warehouse was reduced from more than 1,000 to less than 20. Pulling data for the highest level distributors or the largest markets in the company now can be done in minutes instead of hours. As a result, IT has shifted from performance tuning and keeping the system operational to higher-value business-focused activities. • “The distributors that have been introduced to the BI reports have found them extremely helpful. Because they have never had this kind of information before, when they were presented with the reports, they wanted to take action immediately!” - Sales Development Manager in Latin America Without giving away more, the Amway case study presentation will be one of the unique customer sessions at OpenWorld this year. Speakers Dan Arganbright and Mike Olson have planned an interactive and entertaining session on Monday October 1 at 12:15pm in Moscone West, 2007. I’ll see you there!

Read the article

Oracle BI and XS Energy Drinks – Don’t Miss the Amway Presentation!

- by Maria Forney

Amway is a global leader in the direct sales industry with $10.9B in annual sales in more than 100 countries and territories. The company has implemented a global BI framework that provides accurate, consistent, and timely insights to support global, regional and local analytical research, business planning, performance measurement and assessment. Oracle BI EE is used by 1500 employees across Amway sales, marketing, finance, and supply chain business units as well as Amway affiliates in Europe, Russia, South Africa, Japan, Australia, Latin America, Malaysia, Vietnam, and Indonesia. Last week, I spoke with Lead Data Analyst with Amway Global Sales, Dan Arganbright, and IT Manager with Amway BI Competency Center, Mike Olson, about their upcoming presentation at Oracle OpenWorld in San Francisco. Scheduled during a prime speaking slot on Monday, October 1 at 12:15pm in Moscone West, 2007, Dan and Mike will discuss their experience building Amway’s Distributor Consulting solution, powered by Oracle BI EE. You can find more information here. As background, Amway offers people an opportunity to own their own businesses and consumers exclusive products in health and wellness, beauty and home care. The Amway internal Sales organization is charged with consulting leadership-level Distributors to help them with data insights and ultimately grow their business. Until recently, this was a resource-intense process of gathering and formatting data. In some markets, it took over 40 hours to collect the data and produce the analysis needed for one consultation session. Amway began its global BI journey in 2006 and since then the company has migrated from having multiple technology providers and integration points to an integrated strategic vendor approach. Today, the company has standardized on Oracle technology for BI. Amway has achieved cost savings through the retirement of redundant technology platforms. In addition, Mike’s organization has led the charge to align disparate BI organizations into a BI Competency Center. The following diagram highlights the simplicity of the standardized architecture of Amway today. Dubbed Distributor Consulting, Amway has developed a BI solution using the Oracle technology stack to help Distributor leaders grow their businesses. The Distributor Consulting solution provides over 40 metrics for Sales staff to provide data-driven insights on the Distributors and organizations they support. Using Oracle BI EE, Exadata, and Oracle Data Integrator, Amway provides customized and personalized business intelligence, and the Oracle BI EE dashboards were developed by the Amway Sales organization, which demonstrates business empowerment of the technology. Amway is also leveraging the power of BI to drive business growth in all of its markets. A new set of Distributor Segmentation metrics are enabling a better understanding of distributor behaviors. A Global Scorecard that Amway developed provides key metrics at a market and global level for executive-level discussions. Product Analysis teams can now highlight repeat purchase rates, product penetration and the success of CRM campaigns. In the words of Dan and Mike, the addition of Exadata 11 months ago has been “a game changer.” Amway has been able to dramatically reduce complexity, improve performance and increase business productivity and cost savings. For example, the number of indexes on the global data warehouse was reduced from more than 1,000 to less than 20. Pulling data for the highest level distributors or the largest markets in the company now can be done in minutes instead of hours. As a result, IT has shifted from performance tuning and keeping the system operational to higher-value business-focused activities. • “The distributors that have been introduced to the BI reports have found them extremely helpful. Because they have never had this kind of information before, when they were presented with the reports, they wanted to take action immediately!” - Sales Development Manager in Latin America Without giving away more, the Amway case study presentation will be one of the unique customer sessions at OpenWorld this year. Speakers Dan Arganbright and Mike Olson have planned an interactive and entertaining session on Monday October 1 at 12:15pm in Moscone West, 2007. I’ll see you there!

Read the article

Today's Links (6/29/2011)

- by Bob Rhubart

Event-Driven SOA: Events meet Services | Guido Schmutz Oracle ACE Director Guido Schmutz shows you how to achieve extreme loose coupling within a Service-Oriented Architecture by using event-driven interactions. Misconceptions About Software Architecture | Sanjeev Kumar A concise, to-the-point, and informative article by Sanjeev Kumar. Good Leaders Acknowledge What Can't Be Done - Jeffrey Pfeffer - Harvard Business Review "None of us likes to admit to bad decisions," says Jeffrey Pfeffer. "But imagine how much harder that is for someone who has been chosen to lead a large organization precisely because he or she is thought to have the power to see the future more clearly and chart a wise course." Suboptimal Thinking within Enterprise Architecture | James McGovern McGovern says: "We need to remember that enterprises live and thrive beyond just the current person at the helm." Boundaryless Information Flow | Richard Veryard "If all the boundaries are removed or porous, then the (extended) enterprise or ecosystem becomes like a giant sponge, in which all information permeates the whole," Veryard says. "Some people may think that's a good idea, but it's not what I'd call loose coupling." Coming to a City Near You: Oracle Business Analytics Summits | Rob Reynolds This series of events includes a Technology and Architecture track. New Date for Implementation of Sun Hands-On Course Requirement (Oracle Certification) As announced on the Oracle Certification website, Java Architect, Java Developer, Solaris System Administrator and Solaris Security Administrator certification tracks will include a new mandatory course attendance requirement. VirtualBox 4.0.10 is now available for download | Bob Netherton Netherton shares information on the new release. Updated Technical Best Practices whitepaper | Anthony Shorten The Technical Best Practices whitepaper has been updated with the latest advice. "New advice includes new installation advice, advanced settings, new security settings and advice for both Oracle WebLogic and IBM WebSphere installations," says Shorten. Kscope 11 ADF, AIA and Business Rules | Peter Paul van de Beek Whitehorses Solution Architect Peter Paul van de Beek shares his impressions of KScope11 presentations by Markus Eisele, Sten Vesterli, and Edwin Biemond. Amazon AWS for the learning experience | Andrej Koelewijn "Using AWS changes your expectations how your internal data center should operate," says Koelewijn. BPMN is dead, long live BPEL! (SOA Partner Community Blog) Jürgen Kress shares information -- including a long list of speakers -- for the SOA & BPM Integration Days 2011 conference, October 12th & 13th 2011 in Düsseldorf. InfoQ: HTML5 and the Dawn of Rich Mobile Web Applications James Pearce introduces cross-platform web apps development using HTML5 and web frameworks, such as jQTouch, jQuery Mobile, Sencha Touch, PhoneGap, outlining what makes a good framework. InfoQ: Interview and Book Excerpt: CMMI for Development "Frameworks like TOGAF are used to define an architecture that aligns IT assets and resources to support key business needs and processes of key stakeholders," says SEI's Mike Konrad. "But the individual application systems, capabilities, services, networks, and other IT assets and infrastructure still need to be acquired, developed, or sustained." InfoQ: Architecting a Cloud-Scale Identity Fabric | Eric Olden "The most cited reason for not moving to the cloud is concern about security," says Olden. "In particular, managing user identity and access in the cloud is a tough problem to solve and a big security concern for organizations."

Read the article

Book Reviews: Art of Community and Eyetracking Web Usability

- by ultan o'broin

Holidays time offers a chance to catch up on some user experience and user assistance related material. So, two short book reviews (which I considered using my new Tumblr blog for. More about that another time) coming up. The Art of Community by Jono Bacon Excellent starting point for anyone wanting to get going in the community software (FLOSS, for example) space or understand how to set up, manage, and leverage the collective intelligence of communities for whatever ends. The book is a little too long in my opinion, and of course, usage of what Jono is recommending needs to be nuanced and adapted for enterprise applications space (hardly surprising there is a lot about Ubuntu, Lug Radio, and so on given Jono's interests). Shame there wasn't more information on international, non-English community considerations too. Still, some great ideas and insight into setting up and managing communities that I will leverage (watch out for the results on this blog, later in 2011). One section, on collaborative writing really jumped out. It reinforced the whole idea that to successful community initiatives are based on instigators knowing what makes the community tick in the first place. How about this for insight into user profiles for people who write community user assistance (OK then, "doc") and what tools they might use (in this case, we're talking about Jokosher): "Most people who write documentation for open source software projects would fall into the category of power user. They are technology enthusiasts who are not interested in the super-technical avenues of programming, but want to help out. Many of these people have good writing skills and a good knowledge of using the software, so the documentation fit is natural. With Jokosher we wanted to acknowledge this profile of user. As such, instead of focussing on complex text processing tools, we encouraged our documentation contributors to use a wiki." The book is available for free here, and well as being available from usual sources. Eyetracking Web Usability by Jakob Nielsen and Kara Prentice Another fine book by established experts. I have some field experience of eyetracking studies myself --in the user assistance for enterprise applications space--though Jakob and Kara concentrate on websites for their research here. I would caution how much about websites transfers easily to the applications space, especially enterprise applications, as claimed in the book too. However, Jakob and Kara do make the case very well that understanding design goals (for example, productivity improvement in the case of applications) and the context of the software use is critical. Executing a study using eyetracking technology requires that you know what you want to test, can set up realistic tasks for testing by representative testers, and then analyze the results. Be precise, as lots of data will be generated (I think the authors underplay the effort in analyzing data too). What I found disappointing was the lack of emphasis on eyetracking as only part of the usability solution. It's really for fine-tuning designs in my opinion, and should be used after other design reviews. I also wasn't that crazy about the level of disengagement between the qualitative and quantitative side of this kind of testing that the book indicated. I think it is useful to have testers verbalize their thoughts and for test engineers to prompt, intervene, or guide as necessary. More on cultural or international aspects to usability testing might have been included too (websites are available to everyone). To conclude, I enjoyed the book, took on board some key takeaways about methodologies and found the recommendations sensible and easy to follow (for example about Forms layouts). Applying enterprise applications requirements such as those relating to user profiles, design goals, and overall context of use in conjunction with what's in this book would be the way to go here. It also made me think of how interesting it would be to compare eyetracking findings between website and enterprise applications usage.

Read the article

Drupal Modules for SEO & Content

- by Aditi

When we talk about Drupal SEO, there are two things to consider one is about the relevant SEO practices and about appropriate Drupal Modules available. Optimizing your website for search engines is one of the most important aspect of launching & promoting your website especially if ranking matters to you. Understanding SEO For starters, you have begin with Keyword research and then optimize your content according to your findings by tagging, meta tags etc, Drupal modules once installed help you manage a lot of such parameters. Identifying the target keywords Using the Page Title and Token modules PathAuto configuration <H1> heading tags Optimizing Drupal’s default robots.txt file Etc. While Drupal gives you a lot of ability to make your website content worthy & search engine friendly it is important for you to make sure you are not crossing the line or you could get penalized. Modules Overview Drupal Power is at its best when you have these modules & great brain working together. The basic SEO improvements can be achieved easily with the modules enlisted below, but you can win magical rankings if you use them logically & wisely. Understanding your keyword competition & enhancing your content is the basic key to success and ofcourse the modules: Pathauto Automatically create search enging friendly readable URLS from tokens. A token is a piece of data from content, say the author’s username, or the content’s title. For example mysite.com/an-article, rather than mysite.com/node/114 for every node you make. NodeWords Amazingly useful drupal module that allows you to create custom meta tags and descriptions for your nodes, which gives you the ability to target specific keywords and phrases. Page Title Enables you to set an alternative title for the <title></title> tags and for the <h1></h1> tags on a node. Global Redirect Manage content duplication, 301 redirects, and URL validation with this small, but powerful module. Taxonomy manager Make large additions, or changes to taxonomy very easy. This module provides a powerful interface for managing taxonomies. A vocabulary gets displayed in a dynamic tree view, where parent terms can be expanded to list their nested child terms or can be collapsed. robotstxt A robots.txt file is vital for ensuring that search engine spiders don’t index the unwanted areas of your site. This Drupal module gives you the ability to manage your robots.txt file through the CMS admin. xmlsitemap An XML Sitemap lets the search engines index your website content. This module helps in generating and maintaining a complete sitemap for your website and gives you control over exactly which parts of the site you want to be included in the index. It even gives you the ability to automatically submit your sitemap to Google, Yahoo!, Ask.com and Windows Live every time you update a node or at specific interval. Node Import This module allows you to import a set of nodes from a Comma Seperated Values (CSV) or Tab Seperated Values (TSV) text file. Makes it easy to import hundreds-thousands of csv rows and you get to tie up these rows to CCK fields (or locations), and it can file it under the right taxonomy hierarchy. This is Super life saver module.

Read the article

Silverlight Cream for January 30, 2011 - 2 -- #1038

- by Dave Campbell

In this Issue: Max Paulousky, Renuka Prasad, Ollie Riches, Jesse Liberty(-2-, -3-, -4-, -5-), Medusa M, John Papa, Beth Massi, and Joost van Schaik. Above the Fold: Silverlight: "Stop What You Are Doing And Learn About Reactive Programming" Jesse Liberty WP7: "Windows Phone Looping Selector for Digits " Max Paulousky Lightswitch: "How To Send HTML Email from a LightSwitch Application" Beth Massi Shoutouts: Shawn Wildermuch has niether GooNews for users of his cool WP7 app or or for the WP7 Marketplace in general: R.I.P. GooNews From SilverlightCream.com: Windows Phone Looping Selector for Digits Max Paulousky expanded on the Looping selector for some customization allowing him to display width/height metric measurement selectors... great job, Max! WP7 – How to Create a Simple Checked Listbox In Windows Phone 7 Renuka Prasad has the code for a nicely-working checked Listbox for WP7 on his blog... the post is the code... WP7Contrib: Network Connectivity Push Model Ollie Riches had a post last week that I'm just catching up to... about the 'push model' for network connectivity they produced in WP7 Contrib. Using the Camera in Windows Phone 7 Jesse Liberty has a bunch of posts up... I'm just going to bite the bullet and catch up! ... this 'From Scratch post 24 is all about the camera in your WP7 dev travails... and he makes it look so darned easy :) Linq and Fluent Programming Jesse Liberty's next post is 'From Scratch 25 and is all about Linq and Fluent Programming which started with a discussion at Codemash with Bill Wagner... wanna get a handle on fluent programming? ... check this out. Stop What You Are Doing And Learn About Reactive Programming Another item you might want to get your head around is Reactive Programming, or Rx... Jesse Liberty has a great post up discussing this, as his 'From Scratch post 26... good external links, and lots of commentary as well. Rx–Reactive Programming for Windows Phone Jesse Liberty's 'From Scratch 27 follows the previous on about Rx by taking the Rx show to the WP7 development arena. Want a solid Rx example... here ya go! Reactive Extensions–Observable Sequences are First Class Objects Finally catching up with Jesse Liberty (for now), I find this 'From Scratch number 28 which is again on Rx and WP7 dev, expanding on the example from the previous post by harnessing the power of Rx Localizing Silverlight applications Medusa M has a nice post up at dotnetslackers on localization in Silverlight. If you haven't had to do localization before, it can get to be a pain... understanding an article like this will get you part of the way to being pain-free. Silverlight TV 59: What Goes Into Baking Silverlight? Very cool presentation for those of you interested in the bits ... John Papa's Silverlight TV number 59 is up and he's chatting with Andy Rivas about the process followed getting the bits to us. How To Send HTML Email from a LightSwitch Application Beth Massi's latest Lightswitch post is on sending HTML Email via SMTP from Lightswitch, and then follows that up with sending Email via Outlook automation. ViewModel driven animations using the Visual State Manager, DataStateBehavior and Expression Blend After some good user feedback, Joost van Schaik decided to make some modifications to his WP7 app, and got involved in a Page Title collapse animation driven from the ViewModel. Check out the nice write-up, video, external links, and source... all good! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

ISO Files to USB – The Cheap and Easy Way

- by RonGarlit

(DISCLAIMER: Yes there are lots of more elegant ISO software beside the free Microsoft one I’m about to show. But free is free and it has been tested and works for me for making advance bootable USB drives. That is another story. Look up Windows 8 Developer Preview for that one on BING.) For those of use that work with new technology all the time we accumulate a lot of ISO files and have to burn them to CD/DVD’s quite often. But we now have machines without burner in the corporate environment. We have personally Netbooks and light wait highly mobile laptops that do not have DVD burner. USB ports are all the rage and now we have USB 3.0 which is way faster than the 2.0 we are used to. Just looking at the technology, space saving and the cost issues alone is a reason to buy these answer to the DVD’s. So what is special about USB 2.0 and USB 3.0? USB 2 has a maximum speed of 480 Mbps... (That is Megabits per SECOND!!) Now look at the storage that we have with USB thumb drives that are now up to 64 GB in size, cell phone and PDAs that have a lots of internal storage built in well above the 16 Gig range. At the MAX USB 2.0 speed of 480 Mbps a full transfer of data in between devices can take a long time. Time is money right. Every back up a iPhone? Don’t get me started. So at least the engineers have been planning ahead with USB 3.0 which offers a maximum transfer speed of 4.8 Gbps... (That is Giga bits per SECOND!!) That speed is almost 10 times faster than USB 2.0 …. We don’t need to do the math on that one do we? But for now I'm thrilled with USB 2.0 and the fact I can get these little 4 Gig USB drives for $4.00 each at Staples on sale. Well that is a no brainer don’t you think. But what can you do with them to replace that DVD. Simply and cheaply put………. THIS! First let’s get an ISO file like the Visual Studio 2010 Ultimate DVD ISO from MSDN to demonstrate with. I develop on several computers so this is a good choice for me. So we downloaded the ISO file and put it in a folder somewhere like this. Next we go download to the Windows 7 USB/DVD Download Tool site and read about the tool. http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool And click this like to get the tool and install it. Once it is installed you go to the Start, Programs menu, Windows 7 USB DVD Download Tool folder. And then click the tool to open it up. As you will see it is a sweet, simple tool that was originally designed to put the ISO for Windows 7 which is designed to be bootable on a USB or DVD for us geeks to play with. It is now being used for the Windows 8 Developer Preview by many developers for that for the same purpose it was built for in the past. But for now we will use it to put a NON Bootable ISO on a USB. Hey it does the job and I’m reusing a left over program. Why buy the fancy one or a free trial and clutter up my machine. We will click the BROWSE button and navigate to where we put our ISO file we want to put on the USB drive. Obviously we are going to click NEXT and continue to select a USB Device (you can guess what the DVD button is for). Next we select the USB that we have plugged into one of our laptops USB ports. Then we click the BEGIN COPYING button and the first thing the program does is format our USB drive. Then it starts copying out files out of the ISO and constructing the USB as if it was a DVD. So now that the files are copying to the drive I’m going to warn you. We will error out here. This program was design for bootable ISO’s of which this one is NOT. No problem because what fails it the writing of the bootable data to the drive that isn’t there. No biggie…. Forget the STARTOVER button is even there and click the dialog’s CLOSE button and exit the program. Now go to Windows Explorer and navigate to the USB Device. You can now access everything and even add stuff to the drive. But for me I want to keep this drive for one purpose and that is to install VS2010 on various machines. So the only stuff I’ll add to this is a folder of notes on things on visual studio that I might want to put on other machines I’m installing VS2010 on to. So that is it. Have a nice day! The Ron

Read the article

The Top Ten Security Top Ten Lists

- by Troy Kitch

As a marketer, we're always putting together the top 3, or 5 best, or an assortment of top ten lists. So instead of going that route, I've put together my top ten security top ten lists. These are not only for security practitioners, but also for the average Joe/Jane; because who isn't concerned about security these days? Now, there might not be ten for each one of these lists, but the title works best that way. Starting with my number ten (in no particular order): 10. Top 10 Most Influential Security-Related Movies Amrit Williams pulls together a great collection of security-related movies. He asks for comments on which one made you want to get into the business. I would have to say that my most influential movie(s), that made me want to get into the business of "stopping the bad guys" would have to be the James Bond series. I grew up on James Bond movies: thwarting the bad guy and saving the world. I recall being both ecstatic and worried when Silicon Valley-themed "A View to A Kill" hit theaters: "An investigation of a horse-racing scam leads 007 to a mad industrialist who plans to create a worldwide microchip monopoly by destroying California's Silicon Valley." Yikes! 9. Top Ten Security Careers From movies that got you into the career, here’s a top 10 list of security-related careers. It starts with number then, Information Security Analyst and ends with number one, Malware Analyst. They point out the significant growth in security careers and indicate that "according to the Bureau of Labor Statistics, the field is expected to experience growth rates of 22% between 2010-2020. If you are interested in getting into the field, Oracle has many great opportunities all around the world. 8. Top 125 Network Security Tools A bit outside of the range of 10, the top 125 Network Security Tools is an important list because it includes a prioritized list of key security tools practitioners are using in the hacking community, regardless of whether they are vendor supplied or open source. The exhaustive list provides ratings, reviews, searching, and sorting. 7. Top 10 Security Practices I have to give a shout out to my alma mater, Cal Poly, SLO: Go Mustangs! They have compiled their list of top 10 practices for students and faculty to follow. Educational institutions are a common target of web based attacks and miscellaneous errors according to the 2014 Verizon Data Breach Investigations Report. 6. (ISC)2 Top 10 Safe and Secure Online Tips for Parents This list is arguably the most important list on my list. The tips were "gathered from (ISC)2 member volunteers who participate in the organization’s Safe and Secure Online program, a worldwide initiative that brings top cyber security experts into schools to teach children ages 11-14 how to protect themselves in a cyber-connected world…If you are a parent, educator or organization that would like the Safe and Secure Online presentation delivered at your local school, or would like more information about the program, please visit here.” 5. Top Ten Data Breaches of the Past 12 Months This type of list is always changing, so it's nice to have a current one here from Techrader.com. They've compiled and commented on the top breaches. It is likely that most readers here were effected in some way or another. 4. Top Ten Security Comic Books Although mostly physical security controls, I threw this one in for fun. My vote for #1 (not on the list) would be Professor X. The guy can breach confidentiality, integrity, and availability just by messing with your thoughts. 3. The IOUG Data Security Survey's Top 10+ Threats to Organizations The Independent Oracle Users Group annual survey on enterprise data security, Leaders Vs. Laggards, highlights what Oracle Database users deem as the top 12 threats to their organization. You can find a nice graph on page 9; Figure 7: Greatest Threats to Data Security. 2. The Ten Most Common Database Security Vulnerabilities Though I don't necessarily agree with all of the vulnerabilities in this order...I like a list that focuses on where two-thirds of your sensitive and regulated data resides (Source: IDC). 1. OWASP Top Ten Project The Online Web Application Security Project puts together their annual list of the 10 most critical web application security risks that organizations should be including in their overall security, business risk and compliance plans. In particular, SQL injection risks continues to rear its ugly head each year. Oracle Audit Vault and Database Firewall can help prevent SQL injection attacks and monitor database and system activity as a detective security control. Did I miss any?

Read the article

PC hangs and reboots from time to time

- by Bevor

Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

Read the article

MySQL Connector/Net 6.4.6 Maintenance Release has been released

- by fernando

MySQL Connector/Net 6.4.6, a new version of the all-managed .NET driver for MySQL has been released. This is a maintenance release and is recommended for use in production environments. It is appropriate for use with MySQL server versions 5.0-5.6. This is intended to be the final release for Connector/NET 6.4. It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.4.6 version of MySQL Connector/Net brings the following fixes: - Fix for List.Contains generates a bunch of ORs instead of more efficient IN clause in LINQ to Entities (Oracle bug #14016344, MySql bug #64934). - Fix for error when trying to change the name of an Index on the Indexes/Keys editor; along with this fix now users can change the Index type of a new Index which could not be done in previous versions, and when changing the Index name the change is reflected on the list view at the left side of the Index/Keys editor (Oracle bug #13613801). - Fix for stored procedure call using only its name with EF code first (MySql bug #64999, Oracle bug #14008699). - Fix for performance issue in generated EF query: .NET StartsWith/Contains/EndsWith produces MySql's locate instead of Like (MySql bug #64935, Oracle bug #14009363). - Fix for script generated for code first contains wrong alter table and wrong declaration for byte[] (MySql bug #64216, Oracle bug #13900091). - Fix for Exception thrown when using cascade delete in an EDM Model-First in Entity Framework (Oracle bug #14008752, MySql bug #64779). - Fix for Session locking issue with MySqlSessionStateStore (MySql bug #63997, Oracble bug #13733054). - Fixed deleting a user profile using Profile provider (MySQL bug #64409, Oracle bug #13790123). - Fix for bug Cannot Create an Entity with a Key of Type String (MySQL bug #65289, Oracle bug #14540202). This fix checks if the type has a FixedLength facet set in order to create a char otherwise should create varchar, mediumtext or longtext types when using a String CLR type in Code First or Model First also tested in Database First. Unit tests added for Code First and ProviderManifest. - Fix for bug "CacheServerProperties can cause 'Packet too large' error" (MySQL Bug #66578 Orabug #14593547). - Fix for handling unnamed parameter in MySQLCommand. This fix allows the mysqlcommand to handle parameters without requiring naming (e.g. INSERT INTO Test (id,name) VALUES (?, ?) ) (MySQL Bug #66060, Oracle bug #14499549). - Fixed inheritance on Entity Framework Code First scenarios. Discriminator column is created using its correct type as varchar(128) (MySql bug #63920 and Oracle bug #13582335). - Fixed "Trying to customize column precision in Code First does not work" (MySql bug #65001, Oracle bug #14469048). - Fixed bug ASP.NET Membership database fails on MySql database UTF32 (MySQL bug #65144, Oracle bug #14495292). - Fix for MySqlCommand.LastInsertedId holding only 32 bit values (MySql bug #65452, Oracle bug #14171960) by changing several internal declaration of lastinsertid from int to long. - Fixed "Decimal type should have digits at right of decimal point", now default is 2, but user's changes in EDM designer are recognized (MySql bug #65127, Oracle bug #14474342). - Fix for NullReferenceException when saving an uninitialized row in Entity Framework (MySql bug #66066, Oracle bug #14479715). - Fix for error when calling RoleProvider.RemoveUserFromRole(): causes an exception due to a wrong table being used (MySql bug #65805, Oracle bug #14405338). - Fix for "Memory Leak on MySql.Data.MySqlClient.MySqlCommand", too many MemoryStream's instances created (MySql bug #65696, Oracle bug #14468204). - Small improvement on MySqlPoolManager CleanIdleConnections for better mysqlpoolmanager idlecleanuptimer at startup (MySql bug #66472 and Oracle bug #14652624). - Fix for bug TIMESTAMP values are mistakenly represented as DateTime with Kind = Local (Mysql bug #66964, Oracle bug #14740705). - Fix for bug Keyword not supported. Parameter name: AttachDbFilename (Mysql bug #66880, Oracle bug #14733472). - Added support to MySql script file to retrieve data when using "SHOW" statements. - Fix for Package Load Failure in Visual Studio 2005 (MySql bug #63073, Oracle bug #13491674). - Fix for bug "Unable to connect using IPv6 connections" (MySQL bug #67253, Oracle bug #14835718). - Added auto-generated values for Guid identity columns (MySql bug #67450, Oracle bug #15834176). - Fix for method FirstOrDefault not supported in some LINQ to Entities queries (MySql bug #67377, Oracle bug #15856964). The release is available to download at http://dev.mysql.com/downloads/connector/net/6.4.html Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support!

Read the article

HTG Explains: Why is Printer Ink So Expensive?

- by Chris Hoffman

Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr

Search Results

Search found 8570 results on 343 pages for 'power saving'.

Page 297/343 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304 | Next Page >

- by Gareth

- by pinaldave

- by pinaldave

- by pinaldave

- by RoyOsherove

- by Shaun

- by david.talamelli

- by Vincent Grondin

- by Roger Brinkley

- by kerry

- by Renso

- by Josh Rosen, x86 Product Manager-Oracle

- by Michelle Kimihira

- by Maria Forney

- by Bob Rhubart

- by ultan o'broin

- by Aditi

- by Dave Campbell

- by RonGarlit

- by Troy Kitch

- by Bevor

- by fernando

- by Chris Hoffman

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304 | Next Page >