Search Results

Search found 603 results on 25 pages for 'broke'.

Page 3/25 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Enabling a multi display desktop completely broke Gnome Shell. Help?

    - by Chintan Parikh
    I've been trying to get my dual desktops working on Ubuntu for a while. I previously had them as one large desktop, but that was incredibly slow for some reason. I tried to switch them to multi display desktop on the AMD Catalyst Control Center. Here's what I get after restarting and logging in: http://i.imgur.com/SEjgU.png I'm running an AMD Quad Core A6, AMD Radeon 6540G2 GPU, 16GB Ram. Ubuntu 12.04 Any ideas?

    Read the article

  • Broke my sudoers password, how do I reset it without using sudo?

    - by Eric Dand
    I thought it would be a good idea to finally take the password off my little netbook since it has never actually been of any use, and has mostly just slowed down . But when I went to change my password, there wasn't even an option to make it blank, and any attempt to make it a few easy characters was met with "Password too weak". So I did what any good geek would do and popped open the terminal, read the manual entry for passwd and quickly used the -d option to remove the password from my account. It all went well for a couple days (I even managed to also make my keychain password blank) until I tried to update the thing. My sudoers password is not blank, and it's not my old password. I have no idea what it is. How do I reset it (or even better, make it blank) without the use of the sudo command?

    Read the article

  • Upgrade from 13.04 to 13.10 broke remote SSH access?

    - by stackoverflowuser95
    I can no longer connect via SSH to my Ubuntu instance after upgrading from 13.04 to 13.10 with: # do-release-upgrade Connecting with $ ssh -vvv [ip here] gives me: OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013 debug2: ssh_connect: needpriv 0 debug1: Connecting to [ip here] [[ip here]] port 22. debug1: connect to address [ip here] port 22: Connection timed out ssh: connect to host [ip here] port 22: Connection timed out So I tried uncommenting #PasswordAuthentication yes in /etc/ssh/sshd_config, and restarting with /etc/init.d/ssh restart; but there was no difference.

    Read the article

  • Flushing iptables broke my pipe, how can I save my instance?

    - by Niels
    I was setting up my iptables when I performed a iptables -F and my ssh pipe broke. This is the last output of my session: root@alfapaints:~# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW,ESTABLISHED tcp dpt:2222 ACCEPT tcp -- li465-68.members.linode.com anywhere state NEW,ESTABLISHED tcp dpt:nrpe ACCEPT tcp -- anywhere anywhere tcp dpt:9200 state NEW,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:http state NEW,ESTABLISHED ACCEPT udp -- anywhere anywhere udp spt:domain Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:2222 ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:nrpe ACCEPT tcp -- anywhere anywhere tcp spt:9200 state ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp spt:http state ESTABLISHED ACCEPT udp -- anywhere anywhere udp dpt:domain root@alfapaints:~# iptables -F Write failed: Broken pipe I tested my connection just before and I was able to connect with ssh. Now I did a nmap scan and not a single port is open anymore. I know my VPS is running on VMWare ESXi, could a reboot help? Or if not could I attach and mount the disk to another vm to save the data? Does anybody have some advise? And maybe an explanation what happend or what could have cause my pipe to break? ps: I didn't save my rules on the config directories of iptables. But used a file I stored in ~/rules.config to apply my rules like this: iptables-restore < rules.config So probably a reboot would help? Thanks a lot in advance.

    Read the article

  • mysql broke; how to save some of the table?

    - by user1048138
    For some reason, my mysql cant connect any more. Im running 3 wordpress websites and I need to save the tables. Thats what I really really really really care about... here is the problem: root@dev:/var/log/mysql# mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) Same error is display when logging in with phpmyadmin.. All of the websites display this error Error establishing a database connection

    Read the article

  • Built local glibc, broke system, how do I ssh without parsing the .bashrc?

    - by Mikhail
    The cluster I am on had really old build tools and I needed to use CUDA5. I'm a pretty clever dude and I planned on building the necissary tools. So, I built a local copy of gcc, bintools, and glibc. Everything a CUDA5 could want. All builds finished without error. and I tested gcc and bintools. Everything was wonderful and I built and ran a few of the programs. I set up the LD_LIBRARY_PATHs in the .bashrc and logged back in, expecting a productive night ahead. To my horror I realized that everything is dynamically linked. Now I can't do simple commands like ls [ex@uid377 ~]$ ls ls: error while loading shared libraries: __vdso_time: invalid mode for dlopen(): Invalid argument and I can't do commands to fix the problem like rm or vim! Is there a way for me to ssh but also to ignore .bashrc file? Any suggestions are much appreciated. This machine is obviously under maintained and I don't know when I could have administrator support.

    Read the article

  • Man broke, possibly on installing git, how do I fix?

    - by Emd
    I am running Mac snow leopard 10.6.3 and I used a mac installer program for git that was designed originally for leopard. I think since then my man pages have been broken and attempting to look up any command makes my computer stall for a bit before returning 'no manpage found.' Where do I begin fixing this? Thanks.

    Read the article

  • CloneZilla Broke My System? Ubunut Installation Lost After Running CloneZilla

    - by nicorellius
    I just read through this post and tried to get my installation back using this answer to no avail. What happened to me is this: I spent an hour or more reading through the CloneZilla docs. I thought I was ready to test it out so I burned the disc with the ISO image on it and ran it. The system I used was Ubuntu 10.04, 32-bit. Everything seemed to go fine. I made a clone of my first partition and copied it to my second partition. I followed the instructions, removed the disc and rebooted my system. At this point, I would expect to have two bootable Linux installations, identical to one another. However, upon booting, I got this error message: error: no such device: 4cf1a6ef-xxxx-xxxx-xxxx-4e3a3ce92bcd error: file not found I booted from a Live Ubuntu disc and was able to see my to partitions: 4cf1(1) and 4cf1(2) (abbreviated, because the volumes have long numbers to identify them). The 50 GB partition, on which the original Ubuntu installation sits is the number and the second partition (175 GB) is the same number with an "_" at the end. I could browse the disc partitions and see the files, but I'm not sure what to do next. I know there is a way to restore my grub loader and actually boot either of these installations, but my Linux know-how is limited. Can I edit the boot loader file to fix this problem? The only clue I have is CloneZilla said something about making a new GRUB but I thought it was going to basically modify it so I could boot either installation. Not sure what happened. I am going to look through this post for the time being to see if I can learn anything to help my problem. But I thought that, since this happened as a result of using CloneZilla, it may be a unique question for this board.

    Read the article

  • Program broke my windows. Everything randomly minimizes even after multiple restarts

    - by Xitcod13
    I just installed LoL (league of legends) on my computer. The problem is that almost every time after I play the game, it minimizes all my windows which is really annoying. What is worse however is that afterwards other programs do this as well. In the internet browser doesn't minimize but it does loose focus. For example when i type it randomly looses focus and i have to click on the browser window again to it registers my typing. Is there any way to fix this? What can cause such a strange behavior?? In addition this problem persists even after restarting my computer. I previously thought it was internet driver. I no longer think so this happened right after I started playing the game and seems pretty persistent. Please read the comments for further information. This pretty much renders my computer useless. Even typing this takes a huge effort.

    Read the article

  • The 10.6.3 os x update broke simulated key-presses for Nestopia.

    - by Lou Z.
    The iPhone app that I released is a wireless game controller, it translates touches on the device into key-presses on the networked Mac. This allowed for playing emulator (e.g. Nestopia) games using the iPhone as a controller. Of course, the day that I released it coincided with an os x update. After installing this update, the simulated key-presses no longer work in Nestopia! The crazier thing is, when I go to 'File Open' within Nestopia, I can cycle through the file list by hitting the up-arrow on my iphone controller; i.e. the simulated key-presses work in menu items, but not in the game itself. The code that I use to simulate keys is below. Given the list of changes here, can anyone identify which change would cause this problem? Thanks!! #define UP false #define DOWN true -(void)sendKey:(CGKeyCode)keycode andKeyDirection:(BOOL)keydirection{ CGEventRef eventRef = CGEventCreateKeyboardEvent(NULL, keycode, keydirection); CGEventPost(kCGSessionEventTap, eventRef); CFRelease(eventRef); }

    Read the article

  • Subdomain Routing Rules (using chaining) Broke after upgrading to Zend Framework 1.9.5, but only for

    - by Dan
    I asked a similar question months ago (see How do I write Routing Chains for a Subdomain in Zend Framework in a routing INI file?), on how to write chaining rules in an app.ini format. The answer to this question worked wonderfully! Now, however, I have upgraded to the latest version of the Zend Framework 1.9.5 (I needed to upgrade for another issue) and now my subdomains no longer work! To clarify, if I visit subdomain.domain.com, it does not recognize my rule. However, if I visit subdomain.domain.com/somepage/ it does recognize my routing rule. Here is my code: ;; the following is apparently being ignored, and does not work routes.manager.type = "Zend_Controller_Router_Route_Hostname" routes.manager.route = "manager.sitename.com" routes.manager.defaults.module = "manager" ;; this is not being ignored and works! routes.manager.chains.settings.type = "Zend_Controller_Router_Route_Static" routes.manager.chains.settings.route = "/settings" routes.manager.chains.settings.defaults.controller = "manager" routes.manager.chains.settings.defaults.action = "settings" So for example, if I go to manager.sitename.com, it just redirects to my default index and controller (does not access the module, $this-getRequest()-getModuleName() is blank). However, if I go to manager.sitename.com/settings, the page comes up! This app.ini configuration works fine in ZF 1.7.8, But now since I upgraded to 1.9.5, it no longer works. I have tried adding routes.manager.defaults.controller = "manager" and routes.manager.defaults.action = 'index" to my configuration as well, but this didn't work. There is not much out there on the internet with chaining and app.ini dealing with Zend Framework. Any help on this issue would be greatly appreciated.

    Read the article

  • Ubuntu Raring on iMac 2008; graphics update ATI Radeon HD 2600 Pro broke my Raring this morning!

    - by user197406
    Was working on my iMac(2008) 20,5" this morning when again some GLX etc updates appeared! As usual I let the update-installer do it's job; when finished updating, my screen got scrambled; I can not work anymore as the screen shivers, shakes and graphics is one big mess. Ctrl+Alt+F1 does not work either as most of the time my screen is black completely! When booting into OSX 10.8.5 (Raring dual boot with OSX 10.8.5), OSX graphics works flawlessly! Can anybody indicate me which ATI Radeon drivers I can download which repairs the 'malversation' of this mornings updates? I guess I will have to startup with some rescue boot disk (Knoppix?) to do manipulations… As I'm still a noob as well I need clear explanations (please). Raring worked perfectly in dual boot on my iMac until this mornings updates! Needles to say the 'final resort' is restarting (re)installation of Ubuntu Raring, but want to attempt to rescue my present 13.04. Thank you! Kind regards, Gaytan!

    Read the article

  • Optimize apache for 10K+ wordpress views a day on 2GB RAM E6500 CPU

    - by Broke artist
    I have a dedicated server with apache/php on ubuntu serving my Wordpress blog with about 10K+ pageviews a day. I have W3TC plug in installed with APC. But every now and then server stop responding or goes dead slow and i have to restart apache to get it back. Heres my config what am i doing wrong? ServerRoot "/etc/apache2" LockFile /var/lock/apache2/accept.lock PidFile ${APACHE_PID_FILE} TimeOut 40 KeepAlive on MaxKeepAliveRequests 200 KeepAliveTimeout 2 StartServers 5 MinSpareServers 5 MaxSpareServers 8 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 StartServers 3 MinSpareServers 3 MaxSpareServers 3 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 StartServers 3 MinSpareServers 3 MaxSpareServers 3 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess Order allow,deny Deny from all Satisfy all DefaultType text/plain HostnameLookups Off ErrorLog /var/log/apache2/error.log LogLevel error Include /etc/apache2/mods-enabled/.load Include /etc/apache2/mods-enabled/.conf Include /etc/apache2/httpd.conf Include /etc/apache2/ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %O" common LogFormat "%{Referer}i - %U" referer LogFormat "%{User-agent}i" agent CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined Include /etc/apache2/conf.d/ Include /etc/apache2/sites-enabled/

    Read the article

  • Using the Rijndael Object in VB.NET

    - by broke
    I'm trying out the Rijndael to generate an encrypted license string to use for our new software, so we know that our customers are using the same amount of apps that they paid for. I'm doing two things: Getting the users computer name. Adding a random number between 100 and 1000000000 I then combine the two, and use that as the license number(This probably will change in the final version, but I'm just doing something simple for demonstration purposes). Here is some sample codez: Private Sub Main_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim generator As New Random Dim randomValue As Integer randomValue = generator.Next(100, 1000000000) ' Create a new Rijndael object to generate a key ' and initialization vector (IV). Dim RijndaelAlg As Rijndael = Rijndael.Create ' Create a string to encrypt. Dim sData As String = My.Computer.Name.ToString + randomValue.ToString Dim FileName As String = "C:\key.txt" ' Encrypt text to a file using the file name, key, and IV. EncryptTextToFile(sData, FileName, RijndaelAlg.Key, RijndaelAlg.IV) ' Decrypt the text from a file using the file name, key, and IV. Dim Final As String = DecryptTextFromFile(FileName, RijndaelAlg.Key, RijndaelAlg.IV) txtDecrypted.Text = Final End Sub That's my load event, but here is where the magic happens: Sub EncryptTextToFile(ByVal Data As String, ByVal FileName As String, ByVal Key() As Byte, ByVal IV() As Byte) Dim fStream As FileStream = File.Open(FileName, FileMode.OpenOrCreate) Dim RijndaelAlg As Rijndael = Rijndael.Create Dim cStream As New CryptoStream(fStream, _ RijndaelAlg.CreateEncryptor(Key, IV), _ CryptoStreamMode.Write) Dim sWriter As New StreamWriter(cStream) sWriter.WriteLine(Data) sWriter.Close() cStream.Close() fStream.Close() End Sub There is a couple things I don't understand. What if someone reads the text file and recognizes that it is Rijndael, and writes a VB or C# app that decrypts it? I don't really understand all of this code, so if you guys can help me out I will love you all forever. Thanks in advance

    Read the article

  • Whats the most efficient way to access another forms controls in .NET?

    - by broke
    I'm creating a reporting application, and our customers are going to need to generate some pretty big reports which require quite a bit of memory. Ive been in a re-factoring mood lately, so I was wondering what the best way to access the properties of another open form would be(The reporting viewer opens in a new form.) So far I have: Dim form As MainSelections form = My.Application.OpenForms(2) yay or nay. Thanks

    Read the article

  • Felix Baumgartner Skydives from the Edge of Space [Video]

    - by Jason Fitzpatrick
    Yesterday Felix Baumgartner broke the record for highest skydive by leaping out of a capsule 128,100 feet above the Earth. Check out his jump in the following videos. After flying to an altitude of 39,045 meters (128,100 feet) in a helium-filled balloon, Felix Baumgartner completed a record breaking jump for the ages from the edge of space, exactly 65 years after Chuck Yeager first broke the sound barrier flying in an experimental rocket-powered airplane. Felix reached a maximum of speed of 1,342.8 km/h (833mph) through the near vacuum of the stratosphere before being slowed by the atmosphere later during his 4:20 minute long freefall. The 43-year-old Austrian skydiving expert also broke two other world records (highest freefall, highest manned balloon flight), leaving the one for the longest freefall to project mentor Col. Joe Kittinger. The above video is a 2 minute highlight reel of the ascent and jump; check out the full 15 minute descent video here. For an in-depth look at the technology used to keep Baumgartner safe during his record setting journey, hit up the link below. The Tech Behind Felix Baumgartner’s Stratospheric Skydive [ExtremeTech] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

    Read the article

  • How far back do you use your version control and for what reason?

    - by acidzombie24
    Typically when i work on a project i only go back a few days or the last major change when i decide to do something drastic. I sometimes notice i broke a test or a feature and overlooked it for a few weeks so i may go back a month or two and see if the feature or test is broken and trace down the week i broke it. Then find what change did it. On a long term project over the span of a year. Do you actually go back 6+ months and if so why?

    Read the article

  • Force Windows to output only mono sound

    - by sheepsimulator
    So, the 'right' half of my pair of headphones broke (the transducer+wire are fine, but the earpiece broke on the headband and so the earpiece won't sit over my ear). So now the right channel is being broadcast to my cube neighbors when I wear my headphones. Yes, they look very silly. Is there a way to ensure, in Windows XP (or Windows Media Player), that all stereo sound is downmixed to the left channel only (ie, in mono) so my neighbors don't hear my music? I know that I can setup the mixer to set the balance to 100% left, but information in the right channel won't be heard.

    Read the article

  • Why do things change between using a LiveCD/LiveUSB and installing Ubuntu?

    - by ahow628
    Here have been a couple of weird experiences I've had with a Ubuntu LiveCD or LiveUSB: 1) I had one of the original Chromebooks (CR-48). I ended up wiping ChromeOS and installing only Ubuntu 12.04.0 just after it came out. It worked like a charm. About a year later, I broke something and reinstalled Ubuntu using 12.04.3 on a LiveUSB. The LiveUSB worked perfectly - screen resolution, wifi, trackpad all worked fine. I installed it (once installing updates, once stock from the USB drive) and both times screen resolution, wifi, and trackpad all broke. I ended up downloading 12.04.0 and installing it then upgrading to 12.04.3 after the fact and everything worked perfectly once again. 2) I purchased a Toshiba Portege z935 and the LiveUSB worked perfectly, namely the wifi. After install, wifi was extremely slow and basically couldn't load any pages. The answer was that Bluetooth conflicted somehow with wifi and Bluetooth had to be disabled to get wifi to work. Yet both could be enabled in the LiveUSB version, no problem. So my question is, why does this happen? Why does everything work perfectly from the LiveUSB version but then get broken when installed on the system? Is there a different way to install Ubuntu that would allow things to be installed over exactly as they were on the LiveUSB version (drivers, settings, etc)? Are there assumptions that the install makes that I could override somehow?

    Read the article

  • Laptop touchpad works incorrect when on power supply

    - by Ikke
    My original laptop adapter broke down, so I've baught a new one. It's a no-brand adapter from a dutch internet shop. The power of the new adapter is slightly more than the old adapter, but in my opinion that shouldn't be a problem. The laptop is a Toshiba Sattelite L40-15B. When the old adapter broke down due to short circuit, this laptop was connected. When the adapter is unplugged, the touchpad works correctly and smoothly. But as soon as it is connected, the cursor moves jumpy, and response badly. Does anyone know where this problem comes from, and if there's a solution?

    Read the article

  • Force Windows to output only mono sound

    - by J. Polfer
    So, the 'right' half of my pair of headphones broke (the transducer+wire are fine, but the earpiece broke on the headband and so the earpiece won't sit over my ear). So now the right channel is being broadcast to my cube neighbors when I wear my headphones. Yes, they look very silly. Is there a way to ensure, in Windows XP (or Windows Media Player), that all stereo sound is downmixed to the left channel only (ie, in mono) so my neighbors don't hear my music? I know that I can setup the mixer to set the balance to 100% left, but information in the right channel won't be heard.

    Read the article

  • How does the TuneIn mobile application resume a live stream, when the connection breaks?

    - by navnav
    So I have this TuneIn application on my phone, which allows me to listen to many radio stations. It also allows me to rewind and pause the live stream, which I know is doable with today's technology. What gets me puzzled, though, is how when the internet connection breaks, the live stream will stop, but, when the connection comes back, the app can just pick up from where it broke. Why it gets me puzzled is because there is no way for the app to cache the live stream when the net connection has gone, yet it can start the live stream back up, from where it broke. Is there is possible to start a live stream, at a specific point of the audio stream? Or are they using some other method?

    Read the article

  • Slightly off topic - How to Fix Sky Go Error [t6013-c1501] (and [t6000-c1501])

    - by bconlon
    Sky doesn't seem to understand what their own errors mean, so I cobbled together an understanding from some other posts and managed to get it working.When you see the error [t6013-c1501] instead of your TV programme in Sky Go, it seems to mean:'You registered a device, but then changed the hardware, so now I'm confused!'In other words, the Digital rights management (DRM) used between Sky Go and Silverlight stored an old fingerprint of your PC, but rather than recognising this and allowing you to remove the device, it just disappears from the 'Manage Devices' page.DISCLAIMER: Perform the following steps at your own risk. It worked for me, but I didn't care if it broke stuff. If you care....don't do it!So, to fix this I did the following:1. Login to Sky Go and click 'Watch live TV' from the home page. It will attempt to show Sky News and fail with the error [t6013-c1501].2. Right click on the error and you should see the Menu option 'Silverlight'. Select this and a dialog should appear. Click the 'Application Storage' tab and delete any entry that relates to sky go. Clcik OK to close the dialog.3. Open explorer and navigate to the folder C:\ProgramData\Microsoft\PlayReady4. Rename the file mspr.hds to mspr.hds.OLD5. Go back to the browser and click F5. You may need to logout/login (not sure).Note: Don't rename/delete the folder C:\ProgramData\Microsoft\PlayReady or you will get the error [t6000-c1501]. The folder must exist in order for the new file to be created by Silverlight. Techie talk:So whoever wrote the code to create a new mspr.hds file didn't write code to check the folder existed causing what I assume is a generic error t6000, probably something like:catch (Exception ex) { WriteToLog("Oops, something broke!"); }#

    Read the article

  • Using only alphanumeric characters(a-z) inside toCharArray

    - by Aaron
    Below you will find me using toCharArray in order to send a string to array. I then MOVE the value of the letter using a for statement... for(i = 0; i < letter.length; i++){ letter[i] += (shiftCode); System.out.print(letter[i]); } However, when I use shiftCode to move the value such as... a shifted by -1; I get a symbol @. Is there a way to send the string to shiftCode or tell shiftCode to ONLY use letters? I need it to see my text, like "aaron", and when I use the for statement iterate through a-z only and ignore all symbols and numbers. I THINK it is as simple as... letter=codeWord.toCharArray(a,z); But trying different forms of that and googling it didn't give me any results. Perhaps it has to do with regex or something? Below you will find a complete copy of my program; it works exactly how I want it to do; but it iterates through letters and symbols. I also tried finding instructions online for toCharArray but if there exists any arguments I can't locate them. My program... import java.io.BufferedReader; import java.io.IOException; import java.io.InputStreamReader; /* * Aaron L. Jones * CS219 * AaronJonesProg3 * * This program is designed to - * Work as a Ceasar Cipher */ /** * * Aaron Jones */ public class AaronJonesProg3 { static String codeWord; static int shiftCode; static int i; static char[] letter; /** * @param args the command line arguments */ public static void main(String[] args) throws IOException { // Instantiating that Buffer Class // We are going to use this to read data from the user; in buffer // For performance related reasons BufferedReader reader; // Building the reader variable here // Just a basic input buffer (Holds things for us) reader = new BufferedReader(new InputStreamReader(System.in)); // Java speaks to us here / We get it to query our user System.out.print("Please enter text to encrypt: "); // Try to get their input here try { // Get their codeword using the reader codeWord = reader.readLine(); // Make that input upper case codeWord = codeWord.toUpperCase(); // Cut the white space out codeWord = codeWord.replaceAll("\\s",""); // Make it all a character array letter = codeWord.toCharArray(); } // If they messed up the input we let them know here and end the prog. catch(Throwable t) { System.out.println(t.toString()); System.out.println("You broke it. But you impressed me because" + "I don't know how you did it!"); } // Java Speaks / Lets get their desired shift value System.out.print("Please enter the shift value: "); // Try for their input try { // We get their number here shiftCode = Integer.parseInt(reader.readLine()); } // Again; if the user broke it. We let them know. catch(java.lang.NumberFormatException ioe) { System.out.println(ioe.toString()); System.out.println("How did you break this? Use a number next time!"); } for(i = 0; i < letter.length; i++){ letter[i] += (shiftCode); System.out.print(letter[i]); } System.out.println(); /**************************************************************** **************************************************************** ***************************************************************/ // Java speaks to us here / We get it to query our user System.out.print("Please enter text to decrypt: "); // Try to get their input here try { // Get their codeword using the reader codeWord = reader.readLine(); // Make that input upper case codeWord = codeWord.toUpperCase(); // Cut the white space out codeWord = codeWord.replaceAll("\\s",""); // Make it all a character array letter = codeWord.toCharArray(); } // If they messed up the input we let them know here and end the prog. catch(Throwable t) { System.out.println(t.toString()); System.out.println("You broke it. But you impressed me because" + "I don't know how you did it!"); } // Java Speaks / Lets get their desired shift value System.out.print("Please enter the shift value: "); // Try for their input try { // We get their number here shiftCode = Integer.parseInt(reader.readLine()); } // Again; if the user broke it. We let them know. catch(java.lang.NumberFormatException ioe) { System.out.println(ioe.toString()); System.out.println("How did you break this? Use a number next time!"); } for(i = 0; i < letter.length; i++){ letter[i] += (shiftCode); System.out.print(letter[i]); } System.out.println(); } }

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >