Search Results

Search found 95 results on 4 pages for 'crossover'.

Page 3/4 | < Previous Page | 1 2 3 4  | Next Page >

• Ethernet run tests green but won't connect

  - by Simon Gillbee

  I have a single ethernet run at home that I just added. I have a cable tester that tests for pin/pair crossover or miswired pines. The entire line tests green (all 4 LEDs light up green on the tester) but I can't get any PC to connect through the link. No link light on the ethernet connection. Any simple tests/fixes, or do I rip out the wall sockets and do it again?

  Read the article

• Sharing a USB wireless-g adaptor between two computers

  - by cornjuliox

  I've got two computers here that need to connect via wireless-g usb adapter to the same network for internet access but only one USB adapter. Both PCs are using Windows XP, and I have no crossover cables. I've got both computers wired up to a router, and the PC with the active internet connection has ICS enabled, but the second PC gets no internet. Any ideas?

  Read the article

• When returning from a period of not programming, do you find you've improved?

  - by Jon Purdy

  It seems as though whenever I take an extended break from programming—whether to pursue other interests or simply because I fall out of the habit for a while—I invariably find that when I return to a project and set to coding, I come with an abundance of new ideas, novel approaches, and just plain better code. It may be because I have a lot of other creative interests besides programming, and my mind likes to find correlation and crossover between them, so while I'm doing one thing, in the back of my mind I'm usually also applying it to another. So what's your experience? Do you ever return from a break (whether intentional or not) feeling not only refreshed, but also somehow noticeably improved? Is it actually the norm?

  Read the article

• How do I get my RTL8192ce based wireless device working properly?

  - by JonnyTruelove

  I am using the rtl8192cu chipset (on a Belkin wireless USB adapter N300) combined with 64 bit architecture and the 3.8 kernel. Some of you may know that this doesn't work. I tried this fix - RTL8188CU USB Network Adaptor on ubuntu 13.04 and now my internet is super slow. I am totally new to Ubuntu and I am concerned I do not have the right driver. The "stock" driver was the RTL8192cu, but it didn't connect 99% of the time and if it did the upload speed was higher than the download. Right now I am connecting through my laptop with a crossover cable, so my internet connection is just fine in my apartment. Relevant output from lsusb is here: Bus 002 Device 002: ID 050d:2103 Belkin Components F7D2102 802.11n N300 Micro Wireless Adapter v3000 [Realtek RTL8192CU] (bonus question: is that [050d:2103] the actual physical address straight from the hardware? Or does it change when I put different drivers on it? I am concerned I do not have the right driver)

  Read the article

• Suggested GA operators for a TSP problem?

  - by Mark

  I'm building a genetic algorithm to tackle the traveling salesman problem. Unfortunately, I hit peaks that can sustain for over a thousand generations before mutating out of them and getting better results. What crossover and mutation operators generally do well in this case?

  Read the article

• Installing Win7 over PXE through Serva fails on Loading Network Resources

  - by Armand

  Trying to install Win7 OS to a Lenovo E335 with no DVD/CD. I have to do it either over PXE/Network or USB. Although I am able to get passt the installation menu of Serva, it fails on Loading Network Resources ... FAILED No NIC/Driver, ABORTING! This is the only log on the Serva Client PC and nothing on the Serva-server. Would appreciate if someone can tell me how to go pass this error. THe network card works fine, it has already loaded the Windows installation structure on a X: drive on the new laptop. Another detail: I am using a normal Ethernet Cable to connect the PCs. Should this be enough or a crossover cable is a must in this case?

  Read the article

• Share openVPN connection

  - by Douglas Gemignani

  Hello, Currently I have a server (dev tun) running openVPN and my WinXP client is able to connect to the server just fine. I have an ethernet device and I need to send data to a computer under the server's network, so since the device can't connect on its own I need to configurate my Windows XP to share its VPN connection. So, on my WinXP machine i have: Network Adapter #1 (ip 192.168.0.2 gw 192.168.0.1 with internet access). OpenVPN Connection (dhcp). Network Adapter #2 (crossover cable with device). Here is my client.ovpn cert gertec.crt key gertec.key client ns-cert-type server user nobody group nobody remote IP PORT ca ca.crt dev tun dev-node OpenVPN proto udp resolv-retry infinite nobind comp-lzo verb 3 I would appreciate any help.

  Read the article

• Open Microsoft Publisher Document on Linux

  - by Peter

  I'm pretty sure the options consist of Just don't do it (use a nice open standard file format). Not great when someone sends you something. Translate the format on Windows. I think you need Publisher, the viewer won't even print. But you can download a trial version for a once off (been there, done that). Submit the file for online translation to PDF. www.pdfonline.com/convert-pdf/ Use a Windows VM, wine, crossover office, Win4Lin, or otherwise run Publisher "under" linux. What I really want to do is convert it to something nicer natively under Linux.

  Read the article

• Can SATA be used to connect computers?

  - by André

  Can SATA be used to connect two computers together, just like a crossover Ethernet cable would do ? I know SATA has no "networking" features and even though a controller may have multiple ports, the drives don't "see" each other, and that in SATA one device acts as the host (the computer) and the other device is some kind of "client" (the storage drive). But still, did anyone attempt to make a kernel module that would make one computer appear as a "client" (so that the host's SATA controller detects it as a standard hard drive) and then set up like a pseudo-Ethernet link or a very high speed serial link (and then run pppd on it and do networking) ? Note : I know this is an unprofessional and totally stupid idea, I'm just asking out of curiosity.

  Read the article

• CARP: two machines think they're the master, but only on one interface

  - by Conor McDermottroe

  I have two machines, each configured identically as a firewall/load balancer for a busy website. I have set them up with CARP and pfsync on both the internal and external interfaces. The internal interface is behaving as expected (primary listed as MASTER and secondary listed as BACKUP) On both machines, the network interfaces are as follows: em0 - External interface bge0 - Internal interface bge1 - Crossover connection between both machines carp0 - Shared external interface for CARP carp1 - Shared internal interface for CARP I've rewritten the IP addresses and MAC addresses below. The networks are as follows: 10.0.1.0/24 - External network 10.0.2.0/24 - Internal network 10.0.3.0/24 - Crossover network Here's the output from ifconfig on the primary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.10 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.10 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.10 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.11 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 0 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: MASTER vhid 2 advbase 1 advskew 0 And here's the /etc/rc.conf excerpt from the primary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.10 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.11" And here's the output on the secondary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.11 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.11 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.11 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.10 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 20 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: BACKUP vhid 2 advbase 1 advskew 20 And here's the /etc/rc.conf excerpt from the secondary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.11 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] advskew 20 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] advskew 20 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.10" What I don't understand is, the carp status on carp0 is MASTER on both machines when the status on carp1 is as it should be (MASTER on the primary and BACKUP on the secondary). What am I missing? Where should I be looking for clues?

  Read the article

• Direct DB to Web Server connection

  - by Joel Coel

  I have a database server sitting right underneath a virtual machine host server in the rack, and this vm host is primarily responsible for servers hosting a couple different web sites and app servers that all talk to databases on the other server. Right now both servers are connected to the same switch, and I'm pretty happy with the pathing. However, both servers also have an unused network port. I wondering about the potential benefits of using a short crossover or normal+auto mdix network cable to connect these two servers together directly. Is this a good idea, or would I be doing something that won't show much benefit and is just likely to trip up a future admin who's not looking for this? The biggest weakness I can see right now is that this would likely require a code change for each vm app to point to the new IP of the database server on this private little network, and if I have a problem with the virtual machine host and have to spin up it's guests elsewhere while I fix it I'll have to change this back before things will work.

  Read the article

• How to configure 2nd network card for use in VMWare Workstation?

  - by Timo

  Hi all, I am using VMWare Workstation 6.5, connected to my network with a bridged adapter so that the virtual machine OS (Windows XP) has its own IP adress. This just worked out of the box. Now my host machine (Windows Vista) has an additional network card that is directly connected to another computer using a crossover cable (and fixed IP adress 10.1.1.4, while the "main" network connection is using DHCP with IP in the 192.68.0.* range). How can I use that network connection as well in the virtual machine? Do I need to bridge my 2nd network adapter to some VMnetX adapter? Do I need to add a host virtual adapter? I do not know much about networks, and the VMWare network settings really confuse me :-) Thanks, Timo

  Read the article

• Nokia backup on a Mac

  - by Shyam

  Hi there! As I have to bring my phone to a shop for repair, I want to backup my contacts, calenders and text-messages. My Nokia connects perfectly through Bluetooth with iSync. One baddy, however is that text-messages are nowhere to be found or for the matter of fact, impossible to backup from the phone using iSync. Is there a graceful, free application for Mac that would be able to backup (and later restore) the messages on my phone? The worst possible scenario would include me to write a script that uses the Hayes command set and kermit-ize all SMS's (hundreds at least), so a nice click-and-play solution would be nice to know about. I don't consider applications like Parallel/CrossOver as a solution, as PC Suite is quite buggy with those (which does have the functionality to backup SMS and e-mail). Many thanks!

  Read the article

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• iSCSI: LUNs per target?

  - by badnews

  My question relates specifically to ZFS/COMSTAR but I assume is generally applicable to any iSCSI system: Should one prefer to create a target for every LUN that you want to expose? Or is it good practise to have a single target with multiple LUNs? Does either approach have a performance impact? And is there some crossover point where the other approach makes sense? The use case is for VM disks, where each disk (zvol) is a LUN. So far we have created a a separate target for each VM; but a single target that contains all the LUNs would probably greatly simplify management... but we may need hundreds of LUNs per a single target. (And then possibly tens of initiator connections to that target)

  Read the article

• Open Microsoft Publisher Document on Linux

  - by Peter

  I'm pretty sure the options consist of Just don't do it (use a nice open standard file format). Not great when someone sends you something. Translate the format on Windows. I think you need Publisher, the viewer won't even print. But you can download a trial version for a once off (been there, done that). Submit the file for online translation to PDF. www.pdfonline.com/convert-pdf/ Use a Windows VM, wine, crossover office, Win4Lin, or otherwise run Publisher "under" linux. What I really want to do is convert it to something nicer natively under Linux.

  Read the article

• Establish direct cable connection between Windows 8 PCs in home network

  - by Marie. P.

  I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

  Read the article

• create symlink to another machine

  - by microchasm

  Hi, I have 2 machines. Both running CentOS. Box1 is webserver with apache, php. Box2 is mysql, and file storage. The files will only be accessible from Box1 within the webapp. I'd like to somehow create a symlink or somesuch on box1 to a folder on box2 where uploaded files can be stored and retrieved. Security in mind, what would be the best way to go about linking these 2 boxes up in a transparent (to apache) way? NB: the boxes are connected directly to each other via a crossover cable; no lan access to box2. Much thanks!

  Read the article

• Can't access to access to my web server inside a network with Firewall on

  - by ianenri

  I set up a Web server with the following: There is the Internet Router, configured to Port Foward port 80 to my computer assigned to my PC's IP: 192.168.1.128 My PC is connected to that wireless router from wlan0 Then, my PC is also connected to my device (which is the webserver) with a crossover-cable usign eth0 having this anohter IP: 10.42.43.1 Finally, my device (the webserver) is connected with eth0 with this IP: 10.42.43.55 As you can see, I need to install a reverse-proxy to be able to resolve to my device's webserver. I installed pound (proxy server) in my PC and configured properly to make 192.168.1.128 resolve to 10.42.43.55 So, I just typing my ISP provided IP 200.x.x.x resolves to my device webserver. But there's a problem: I HAD TO STOP MY FIREWALL. I don't know how I need exactly configure the firewall in SUSE YAST2, or at least iptables. Stopping it is not an option, not for security reasons, just because there's port fowarding rule that is needed to give Internet access to my device too. I'm using openSUSE 12.1

  Read the article

• How can I connect a wired PC to the internet through my Macs wifi connection?

  - by David Weitz

  So I'll probably be buying a USB wifi adapater if I can't get this to work, but I'm trying. I have a wireless router at home and my Macbook Pro is connected to said wifi. My desktop doesn't have a wifi connection, but I've connected my macbook with my desktop via crossover cable. I enabled internet sharing on my macbook, but my Windows 7 desktop can't get a connection. I tried just regular file sharing and that works fine, but the internet sharing doesn't. I assume the goal is to get my PC to see my mac as the default gateway, but I've had no luck manually setting it. Here's the ifconfig output on my mac and my attempt at settings on windows: http://i.imgur.com/uJfUz.png

  Read the article

• how to work with strings and integers as bit strings in python?

  - by Manuel

  Hello! I'm developing a Genetic Algorithm in python were chromosomes are composed of strings and integers. To apply the genetic operations, I want to convert these groups of integers and strings into bit strings. For example, if one chromosome is: ["Hello", 4, "anotherString"] I'd like it to become something like: 0100100100101001010011110011 (this is not actual translation). So... How can I do this? Chromosomes will contain the same amount of strings and integers, but this numbers can vary from one algorithm run to another. To be clear, what I want to obtain is the bit representation of each element in the chromosome concatenated. If you think this would not be the best way to apply genetic operators (such as mutation and simple crossover) just tell me! I'm open to new ideas. Thanks a lot! Manuel

  Read the article

• Configuring 2 XBee Modules on OSX for wireless connection

  - by Annette

  I am trying find out how and with which program for OSX (10.5.8) I can configure serial ports? I am trying to establish a wireless connection between two Xbee´s (RF modules) and cannot figure out how to use ZTerm nor screen under Terminal. The setup I am using is: an Arduino+Xbeeshield+Xbee with external power supply, and an xbee on the xbee explorer connected to the Computer via USB. I am trying to gather information on this through various forums, but most of them cover the configuration issue for PC using X-CTU (which I tried with CrossOver but it doesn´t recognize ny of my ports). According to one source, using screen under Terminal should show me all my serial ports, particularly /dev/tty.KeySerial1 - but it doesn´t show, even though I´ve plugged in both my arduino+xbee shield and the xbee on the explorer.

  Read the article

• How do I style just the thumbnail image in this post?

  - by Mike Johnston

  I need help with some CSS styling. I've tried various options with Firebug and cannot sort this out. How can I style the thumbnails on my posts (eg url: http://thatcriticguy.com/index.php?post/4/crossover-9-revamped-reinvented-and-a-must-have) and not style all images in the post at the same time. I have numerous posts on this site and need to only style the ones that are thumbnails that float right. Is there a way to do this without modifying the template code just using CSS?

  Read the article

• OpenGL performance on rendering "virtual gallery" (textures)

  - by maticus

  I have a considerable (120-240) amount of 640x480 images that will be displayed as textured flat surfaces (4 vertex polygons) in a 3D environment. About 30-50% of them will be visible in a given frame. It is possible for them to crossover. Nothing else will be present in the environment. The question is - will the modern and/or few-years-old (lets say Radeon 9550) GPU cope with that, and what frame rate can I expect? I aim for 20FPS, but 30-40 would be nice. Would changing the resolution to 320x240 make it more probable to happen? I do not have any previous experience with performance issues of 3D graphics on modern GPUs, and unfortunately I must make a design choice. I don't want to waste time on doing something that couldn't have worked :-)

  Read the article

• Small hiccup with VMware Player after upgrading to Ubuntu 12.04

  The upgrade process Finally, it was time to upgrade to a new LTS version of Ubuntu - 12.04 aka Precise Pangolin. I scheduled the weekend for this task and despite the nickname of Mauritius (Cyber Island) it took roughly 6 hours to download nearly 2.400 packages. No problem in general, as I have spare machines to work on, and it was weekend anyway. All went very smooth and only a few packages required manual attention due to local modifications in the configuration. With the new kernel 3.2.0-24 it was necessary to reboot the system and compared to the last upgrade, I got my graphical login as expected. Compilation of VMware Player 4.x fails A quick test on the installed applications, Firefox, Thunderbird, Chromium, Skype, CrossOver, etc. reveils that everything is fine in general. Firing up VMware Player displays the known kernel mod dialog that requires to compile the modules for the newly booted kernel. Usually, this isn't a big issue but this time I was confronted with the situation that vmnet didn't compile as expected ("Failed to compile module vmnet"). Luckily, this issue is already well-known, even though with "Failed to compile module vmmon" as general reason but nevertheless it was very easy and quick to find the solution to this problem. In VMware Communities there are several forum threads related to this topic and VMware provides the necessary patch file for Workstation 8.0.2 and Player 4.0.2. In case that you are still on Workstation 7.x or Player 3.x there is another patch file available. After download extract the file like so: tar -xzvf vmware802fixlinux320.tar.gz and run the patch script as super-user: sudo ./patch-modules_3.2.0.sh This will alter the existing installation and source files of VMware Player on your machine. As last step, which isn't described in many other resources, you have to restart the vmware service, or for the heart-fainted, just reboot your system: sudo service vmware restart This will load the newly created kernel modules into your userspace, and after that VMware Player will start as usual. Summary Upgrading any derivate of Ubuntu, in my case Xubuntu, is quick and easy done but it might hold some surprises from time to time. Nonetheless, it is absolutely worthy to go for it. Currently, this patch for VMware is the only obstacle I had to face so far and my system feels and looks better than before. Happy upgrade! Resources I used the following links based on Google search results: http://communities.vmware.com/message/1902218#1902218http://weltall.heliohost.org/wordpress/2012/01/26/vmware-workstation-8-0-2-player-4-0-2-fix-for-linux-kernel-3-2-and-3-3/ Update on VMware Player 4.0.3 Please continue to read on my follow-up article in case that you upgraded either VMware Workstation 8.0.3 or VMware Player 4.0.3.

  Read the article

< Previous Page | 1 2 3 4  | Next Page >