Search Results

Search found 1282 results on 52 pages for 'fi no'.

Page 3/52 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Wi-fi interface fails to authenticate on secured networks

  - by Eduardo Bezerra

  the problem is that I can't connect to wireless networks that have security enabled. I can connect fine to the unsecured network of my university, but not to the secured one in the same building. Also, it fails to connect to my home wireless router, which uses wpa2 encryption. Any ideas? I have a Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01), with pci id [14e4:4353], running Ubuntu 12.10 on a macbook pro 6,2. I'm using bcmwl-kernel-source package with kernel module wl to enable my wi-fi device.

  Read the article

• Looking for a royalty free sci-fi sounding song thats 1:00+ long, and costs <= $5

  - by CyanPrime

  I'm looking for a royalty free sci-fi sounding song thats 1:00+ long, and costs less then, or is $5 usd. I want to have a nice BGM for my engine demo I'm going to release for a game I'm planing on having go commercial. I don't want to spend too much money on it, so my limit is $5 usd. I want it to be at least a 1:00 in length. Where should I look? Or even better, do you have a link to a song that meets the criteria?

  Read the article

• Wi-Fi not working only on Ubuntu computer?

  - by Joseph_carp

  The Wi-Fi at our house does not work on my Asus notebook running Ubuntu 12.04. It works fine on all other devices except this one. Internet worked fine before I had Ubuntu and I had Windows 7, but we also had a different ISP and place. My roommate's Windows 7 notebook and netbook both work fine with the internet and so do all of our phones and iPods. I do not know what is wrong because it works fine EVERYWHERE else, but when I am connected to my own router at my house it is either EXTREMELY slow or it just loads and loads and loads. I have all of the correct drivers and all that so why is it just this one connection that is a problem. I do not know if this matters but the ISP is Comcast and so is the Modem/wireless-router. Any help is much appreciated, thank you.

  Read the article

• Cannot make Wi-Fi hotspot

  - by Junaid

  I want to make my laptop as wi-fi hotspot. To do so, I pressed button Settings-Network-Wireless-Use as Hotspot.. Then it creates a wireless network connection 'Hostspot' and connects. But it gets disconnected just after making connection. Here is my network hardware info: sudo lshw -C network *-network description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:d9200000-d9201fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:45 ioport:2000(size=256) memory:d5010000-d5010fff memory:d5000000-d500ffff memory:d5020000-d502ffff My machine is running on Ubuntu 11.10 Can anybody help in it? Thanks

  Read the article

• HTG Projects: Create a Pop Art Sci-Fi Poster with an Inkjet Printer

  - by Eric Z Goodnight

  Looking to decorate your house with some cool artwork? Grab some of your favorite Sci-Fi pics and some surprisingly simple tools, and create a Pop Art style poster in minutes. Through a simple process called “posterization,” you can reduce any graphic into a cool limited graphic with a similar look that Andy Warhol would have used when he created his famous Marylin Monroe image in the sixties. Pick a theme, grab some images, and get ready to decorate your home with a surprisingly easy and surprisingly cool poster any inkjet printer can produce Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Arctic Theme for Windows 7 Gives Your Desktop an Icy Touch Install LibreOffice via PPA and Receive Auto-Updates in Ubuntu Creative Portraits Peek Inside the Guts of Modern Electronics Scenic Winter Lane Wallpaper to Create a Relaxing Mood Access Your Web Apps Directly Using the Context Menu in Chrome The Deep – Awesome Use of Metal Objects as Deep Sea Creatures [Video]

  Read the article

• Yoga Pro 2 Wi-Fi not working

  - by user293004

  I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

  Read the article

• Connectify Dispatch Links Multiple Network Nodes Into a Mega Connection

  - by Jason Fitzpatrick

  Connectify Dispatch wants to change the way you interact with the networks around you by making it dead simple to mesh all available Wi-Fi, Cellular, and Ethernet connections into a massive and stable pipeline. Dispatch makes it open-and-click easy to hook up multiple Wi-Fi nodes, your cellphone, and even Ethernet connections into a single blended connection. While the video above gives a great overview of the process, check out the video below to see it in real world action: The project is currently in the last phase of KickStarter funding, so now is a great time to score Connectify Dispatch at a steep discount–pledging as little as $10 to fund the project, for example, scores you 50% of a 6-month Pro license. Hit up the link below to read more about the project, check the KickStarter status, and see all the neat features in the development pipeline. Dispatch: The Internet, Faster. [KickStarter] HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

  Read the article

• 100+ Science Fiction Movies Supercut [Video]

  - by Asian Angel

  If you were looking for inspiration for a weekend sci-fi movie watching marathon, then this awesome supercut video of 100+ sci-fi movies is the perfect place to start! Now all you need is a nice tub of popcorn to round things out… Science Fiction: A Supercut (Glitch Mob remix “Monday”) [via Geeks are Sexy] Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

  Read the article

• On checking kernel parms HP-UX & Oracle 10.2

  - by [email protected]

  Hi,Just did this little script for a customer wanting to investigate if the kernel parameters of their HP-UX machines fits or not the Oracle 10.2 specifications ( looks like someone checked the "User Verified" at database installation time on some prerequisites)Just want to share ( its in Spanish)Hope it helps!--L Normal 0 21 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} ### ### check_kernel_parms.sh ### ### ### ###    NAME ###      check_kernel_parms.sh ### ###    DESCRIPTION ###      Comprueba los parametros de kernel ### ###    NOTES ###     Valido para versiones de SO HP-UX y Oracle 10.2 ###     ### ###    MODIFIED   (MM/DD/YY) ###    lvelasco    05/20/10 - Creacion     V_DATE=`/usr/bin/date +%Y%m%d_%H%M%S` if [ "${1}" != 'sin_traza' ]; then   V_FICHERO_LOG=`dirname $0`/`basename $0`.${V_DATE}.log   exec 4>&1   tee ${V_FICHERO_LOG} >&4 |&   exec 1>&p 2>&1 fi   echo "${V_DATE}- check_params.sh *******************************************" echo "Comenzado ejecucion de chequeo de parametros de kernel en maquina `hostname`" echo "****************************************************************************"   UX_VERS=`uname -a | awk '{print $3}'` KCTUNE=/usr/sbin/kctune MEM_TOTAL_MB=`./check_mem` <-- This should return the physical mem of the machine on bytes MEM_TOTAL=$((MEM_TOTAL_MB*1024))     NPROC=$(${KCTUNE} | grep nproc | grep -v '(nproc' | grep -v *nproc | awk '{print $2}') if [ ${NPROC} -lt 4096 ] then        echo "[FAILED] Information: El parametro nproc con valor actual ${NPROC} debe tener una valor superior a 4096" else        echo "[OK] Information: El parametro nproc con valor actual ${NPROC} debe tener una valor superior a 4096" fi     KSI_ALLOC_MAX_T=$(${KCTUNE} | grep ksi_alloc | awk '{print $2}') KSI_ALLOC_MAX=$((NPROC*8)) if [ ${KSI_ALLOC_MAX_T} -lt ${KSI_ALLOC_MAX} ] then        echo "[FAILED] Information: El parametro ksi_alloc_max con valor actual ${KSI_ALLOC_MAX_T} debe tener una valor superior a ${KSI_ALLOC_MAX}" else        echo "[OK] Information: El parametro ksi_alloc_max con valor actual ${KSI_ALLOC_MAX_T} debe tener una valor superior a ${KSI_ALLOC_MAX}" fi       EXECUTABLE_STACK=$(${KCTUNE} | grep executable_stack | awk '{print $2}') if [ ${EXECUTABLE_STACK} -ne 0 ] then        echo "[FAILED] Information: El parametro executable_stack con valor actual ${EXECUTABLE_STACK} debe tener una valor igual a 0" else        echo "[OK] Information: El parametro executable_stack con valor actual ${EXECUTABLE_STACK} debe tener una valor igual a 0" fi       MAX_THREAD_PROC=$(${KCTUNE} | grep max_thread_proc | awk '{print $2}') if [ ${MAX_THREAD_PROC} -lt 1024 ] then        echo "[FAILED] Information: El parametro max_thread_proc con valor actual ${MAX_THREAD_PROC} debe tener una valor superior a 1024" else        echo "[OK] Information: El parametro max_thread_proc con valor actual ${MAX_THREAD_PROC} debe tener una valor superior a 1024" fi     MAXDSIZ=$(${KCTUNE} | grep 'maxdsiz ' | awk '{print $2}') if [ ${MAXDSIZ} -lt 1073741824 ] then        echo "[FAILED] Information: El parametro maxdsiz con valor actual ${MAXDSIZ} debe tener una valor superior a 1073741824" else        echo "[OK] Information: El parametro maxdsiz con valor actual ${MAXDSIZ} debe tener una valor superior a 1073741824" fi     MAXDSIZ_64BIT=$(${KCTUNE} | grep maxdsiz_64bit | awk '{print $2}') if [ ${MAXDSIZ} -lt 2147483648 ] then        echo "[FAILED] Information: El parametro maxdsiz_64bit con valor actual ${MAXDSIZ_64BIT} debe tener una valor superior a 2147483648" else        echo "[OK] Information: El parametro maxdsiz_64bit con valor actual ${MAXDSIZ_64BIT} debe tener una valor superior a 2147483648" fi   MAXSSIZ=$(${KCTUNE} | grep 'maxssiz ' | awk '{print $2}') if [ ${MAXSSIZ} -lt 134217728 ] then        echo "[FAILED] Information: El parametro maxssiz con valor actual ${MAXSSIZ} debe tener una valor superior a 134217728" else        echo "[OK] Information: El parametro maxssiz con valor actual ${MAXSSIZ} debe tener una valor superior a 134217728" fi     MAXSSIZ_64BIT=$(${KCTUNE} | grep maxssiz_64bit | awk '{print $2}') if [ ${MAXSSIZ} -lt 1073741824 ] then        echo "[FAILED] Information: El parametro maxssiz_64bit con valor actual ${MAXSSIZ} debe tener una valor superior a 1073741824" else        echo "[OK] Information: El parametro maxssiz_64bit con valor actual ${MAXSSIZ} debe tener una valor superior a 1073741824" fi     MAXUPRC_T=$(${KCTUNE} | grep maxuprc | awk '{print $2}') MAXUPRC=$(((NPROC*9)/10)) if [ ${MAXUPRC_T} -lt ${MAXUPRC} ] then        echo "[FAILED] Information: El parametro maxuprc con valor actual ${MAXUPRC_T} debe tener una valor superior a ${MAXUPRC}" else        echo "[OK] Information: El parametro maxuprc con valor actual ${MAXUPRC_T} debe tener una valor superior a ${MAXUPRC}" fi   MSGMNI=$(${KCTUNE} | grep msgmni | awk '{print $2}') if [ ${MSGMNI} -lt ${NPROC} ] then        echo "[FAILED] Information: El parametro msgni con valor actual ${MSGMNI} debe tener una valor superior a ${NPROC}" else        echo "[OK] Information: El parametro msgni con valor actual ${MSGMNI} debe tener una valor superior a ${NPROC}" fi     if [ ${UX_VERS} = "B.11.23" ] then        MSGSEG=$(${KCTUNE} | grep msgseg | awk '{print $2}')        if [ ${MSGSEG} -lt 32767 ]        then        echo "[FAILED] Information: El parametro msgseg con valor actual ${MSGSEG} debe tener una valor superior a 32767"        else        echo "[OK] Information: El parametro msgseg con valor actual ${MSGSEG} debe tener una valor superior a 32767"        fi fi   MSGTQL=$(${KCTUNE} | grep msgtql | awk '{print $2}') if [ ${MSGTQL} -lt ${NPROC} ] then        echo "[FAILED] Information: El parametro msgtql con valor actual ${MSGTQL} debe tener una valor superior a ${NPROC}" else        echo "[OK] Information: El parametro msgtql con valor actual ${MSGTQL} debe tener una valor superior a ${NPROC}" fi       if [ ${UX_VERS} = "B.11.23" ] then        NFILE_T=$(${KCTUNE} | grep nfile | awk '{print $2}')        NFILE=$((15*NPROC+2048))        if [ ${NFILE_T} -lt ${NFILE} ]        then        echo "[FAILED] Information: El parametro nfile con valor actual ${NFILE_T} debe tener una valor superior a ${NFILE}"        else        echo "[OK] Information: El parametro nfile con valor actual ${NFILE_T} debe tener una valor superior a ${NFILE}"        fi fi     NFLOCKS=$(${KCTUNE} | grep nflocks | awk '{print $2}') if [ ${NFLOCKS} -lt ${NPROC} ] then        echo "[FAILED] Information: El parametro nflocks con valor actual ${NFLOCKS} debe tener una valor superior a ${NPROC}" else        echo "[OK] Information: El parametro nflocks con valor actual ${NFLOCKS} debe tener una valor superior a ${NPROC}" fi   NINODE_T=$(${KCTUNE} | grep ninode | grep -v vx | awk '{print $2}') NINODE=$((8*NPROC+2048)) if [ ${NINODE_T} -lt ${NINODE} ] then        echo "[FAILED] Information: El parametro ninode con valor actual ${NINODE_T} debe tener una valor superior a ${NINODE}" else        echo "[OK] Information: El parametro ninode con valor actual ${NINODE_T} debe tener una valor superior a ${NINODE}" fi     NCSIZE_T=$(${KCTUNE} | grep ncsize | awk '{print $2}') NCSIZE=$((NINODE+1024)) if [ ${NCSIZE_T} -lt ${NCSIZE} ] then        echo "[FAILED] Information: El parametro ncsize con valor actual ${NCSIZE_T} debe tener una valor superior a ${NCSIZE}" else        echo "[OK] Information: El parametro ncsize con valor actual ${NCSIZE_T} debe tener una valor superior a ${NCSIZE}" fi     if [ ${UX_VERS} = "B.11.23" ] then        MSGMAP_T=$(${KCTUNE} | grep msgmap | awk '{print $2}')        MSGMAP=$((MSGTQL+2))        if [ ${MSGMAP_T} -lt ${MSGMAP} ]        then        echo "[FAILED] Information: El parametro msgmap con valor actual ${MSGMAP_T} debe tener una valor superior a ${MSGMAP}"        else        echo "[OK] Information: El parametro msgmap con valor actual ${MSGMAP_T} debe tener una valor superior a ${MSGMAP}"        fi fi   NKTHREAD_T=$(${KCTUNE} | grep nkthread | awk '{print $2}') NKTHREAD=$((((NPROC*7)/4)+16)) if [ ${NKTHREAD_T} -lt ${NKTHREAD} ] then        echo "[FAILED] Information: El parametro nkthread con valor actual ${NKTHREAD_T} debe tener una valor superior a ${NKTHREAD}" else        echo "[OK] Information: El parametro nkthread con valor actual ${NKTHREAD_T} debe tener una valor superior a ${NKTHREAD}" fi     SEMMNI=$(${KCTUNE} | grep semmni | grep -v '(semm' | awk '{print $2}') if [ ${SEMMNI} -lt ${NPROC} ] then        echo "[FAILED] Information: El parametro semmni con valor actual ${SEMMNI} debe tener una valor superior a ${NPROC}" else        echo "[OK] Information: El parametro semmni con valor actual ${SEMMNI} debe tener una valor superior a ${NPROC}" fi     SEMMNS_T=$(${KCTUNE} | grep semmns | awk '{print $2}') SEMMNS=$((SEMMNI+2)) if [ ${SEMMNS_T} -lt ${SEMMNI} ] then        echo "[FAILED] Information: El parametro semmns con valor actual ${SEMMNS_T} debe tener una valor superior a ${SEMMNS}" else        echo "[OK] Information: El parametro semmns con valor actual ${SEMMNS_T} debe tener una valor superior a ${SEMMNS}" fi   SEMMNU_T=$(${KCTUNE} | grep semmnu | awk '{print $2}') SEMMNU=$((NPROC-4)) if [ ${SEMMNU_T} -lt ${SEMMNU} ] then        echo "[FAILED] Information: El parametro semmnu con valor actual ${SEMMNU_T} debe tener una valor superior a ${SEMMNU}" else        echo "[OK] Information: El parametro semmnu con valor actual ${SEMMNU_T} debe tener una valor superior a ${SEMMNU}" fi     if [ ${UX_VERS} = "B.11.23" ] then        SEMVMX=$(${KCTUNE} | grep msgseg | awk '{print $2}')        if [ ${SEMVMX} -lt 32767 ]        then        echo "[FAILED] Information: El parametro semvmx con valor actual ${SEMVMX} debe tener una valor superior a 32767"        else        echo "[OK] Information: El parametro semvmx con valor actual ${SEMVMX} debe tener una valor superior a 32767"        fi fi     SHMMNI=$(${KCTUNE} | grep shmmni | awk '{print $2}') if [ ${SHMMNI} -lt 512 ] then        echo "[FAILED] Information: El parametro shmmni con valor actual ${SHMMNI} debe tener una valor superior a 512" else        echo "[OK] Information: El parametro shmmni con valor actual ${SHMMNI} debe tener una valor superior a 512" fi     SHMSEG=$(${KCTUNE} | grep shmseg | awk '{print $2}') if [ ${SHMSEG} -lt 120 ] then        echo "[FAILED] Information: El parametro shmseg con valor actual ${SHMSEG} debe tener una valor superior a 120" else        echo "[OK] Information: El parametro shmseg con valor actual ${SHMSEG} debe tener una valor superior a 120" fi   VPS_CEILING=$(${KCTUNE} | grep vps_ceiling | awk '{print $2}') if [ ${VPS_CEILING} -lt 64 ] then        echo "[FAILED] Information: El parametro vps_ceiling con valor actual ${VPS_CEILING} debe tener una valor superior a 64" else        echo "[OK] Information: El parametro vps_ceiling con valor actual ${VPS_CEILING} debe tener una valor superior a 64" fi   SHMMAX=$(${KCTUNE} | grep shmmax | awk '{print $2}') if [ ${SHMMAX} -lt ${MEM_TOTAL} ] then         echo "[FAILED] Information: El parametro shmmax con valor actual ${SHMMAX} debe tener una valor superior a ${MEM_TOTAL}" else         echo "[OK] Information: El parametro shmmax con valor actual ${SHMMAX} debe tener una valor superior a ${MEM_TOTAL}" fi exit 0  

  Read the article

• Windows 7: Wi-Fi connection drops intermittently - only returns after "Troubleshoot connection" resets the adapter

  - by sleske

  On our laptop (running Windows 7) the Wi-Fi connection drops intermittently. Symptoms: Connectivity is suddenly lost, and the "signal strenght" indicator in the tray shows zero strength and a yellow "star" symbol. What happens then: The problem does not resolve itself by just waiting. If I click on the tray icon, the "Windows network diagnostics" wizard pops up and tells me that there is a networking problem (duh). If I click on the "repair" button (not sure about the wording), the wizard works for a while, then reports that it has reset the network adapter. Then Wi-Fi works again. While the above procedure has worked every time so far, it is very annoying. It takes 10-20s to repair the connection, and in the meantime downloads, video streams etc. may have been aborted. Some more details: The problem occurs without any apparent regularity, but usually a few minutes after powerup (though not every time). It happens frequently enough to be annoying. It is unlikely to be a router problem - another laptop running at the same time usually has no Wi-Fi problems. I am at a loss about what to try to troubleshoot this. Any ideas? Computer: Acer Aspire 7739Z. Wi-Fi card: Atheros AR5B125

  Read the article

• Share laptop Wi-Fi with router set up as access point via ethernet cables

  - by obie

  I have an ADSL modem which serves as a wireless router. There's a laptop connected to it through cable. On the other room I have a laptop which is connected through the router wirelessly. Since I have other appliances that need to get connected but are not Wi-Fi capable I have another Wi-Fi router. How can I share the second laptop's Wi-Fi with the second router so that the router can then serve as an access point to give internet to my other appliances through ethernet cables? I want something like this: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV What I've tried so far is opened the admin interface of router 2 then set static IP 192.168.100.13 and disabled the DHCP. The DHCP of the main router starts with 192.168.100.1 then I hooked up router 2 with the laptop 2 through Cat5 cable but for some reason it's not working.

  Read the article

• Sharing internet connection from Windows XP using wi-fi router

  - by Darius

  Hi, I have an network configuration like: Ethernet cable from ISP connected to Windows XP machine, configured with static IP 192.168.0.3 Another ethernet connection from 2nd Windows XP machine's network adapter to a Wi-Fi router (D-Link Airport G+) XP set to "Share internet connection", the 2nd adapter configured as static to 192.169.0.1 D-Link Airport Wi-Fi router also configured as "static connection", it's IP set to 192.169.0.2, default gateway set to 192.169.0.1. Network mask everywhere is 24. Laptop computer connected with the router with static IP 192.169.0.3 The problems are: XP machine sees the router (it's able to ping it and access it via the web admin tool) The router somehow cannot PING the XP machine (using the tool provided by the web-based admin tool) The laptop computer cannot ping anything and cannot be pinged The router is only accessible when the ethernet cable is connected with a router's 1-4 LAN port, when I connect it via "WAN" port (which I believe is the proper one) it's not visible from the XP machine If you have similar experience with configuring a network like this I would really appreciate your help. I cannot use the Wi-Fi router with the ISP cable itself.

  Read the article

• Data Networks Visualized via Light Paintings [Video]

  - by ETC

  All around you are wireless data networks: cellular networks, Wi-Fi networks, a world of wireless communication. Check out this awesome video of network signals mapped over a cityscape. What would happen if you made a device that allowed you to map signal strength onto film? In the following video electronics tinkerers craft an LED meter and use it to paint onto long exposure photographs with phenomenal results. Immaterials: light painting Wi-Fi [via Make] Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Add a “Textmate Style” Lightweight Text Editor with Dropbox Syncing to Chrome and Iron Is the Forcefield Really On or Not? [Star Wars Parody Video] Google Updates Picasa Web Albums; Emphasis on Sharing and Showcasing Uwall.tv Turns YouTube into a Video Jukebox Early Morning Sunrise at the Beach Wallpaper Data Networks Visualized via Light Paintings [Video]

  Read the article

• ZigBee, Wi-Fi Team Up for Wireless Networking

  Goal is interoperable wireless technology in smart homes ZigBee - Wireless - Data Communications - Business - Telecommunications

  Read the article

• Tutorial: Wi-Fi Guru: DD-WRT Router and Wireless Printer

  Q: My Linksys WRT600N flashed with v24 DD-WRT does not work wirelessly with HP7410 all-in-one printer. The printer is able to make a connection, but I cannot ping the printer nor get other programs to recognize it.

  Read the article

• Ten Leading Wi-Fi Security Challenges

  Wireless security in the enterprise has come a long way, yet IT security professionals still lose sleep over these security challenges.

  Read the article

• Ten Leading Wi-Fi Security Challenges

  Wireless security in the enterprise has come a long way, yet IT security professionals still lose sleep over these security challenges.

  Read the article

• 5 Advanced Wi-Fi Network Security Tips

  Go beyond the basics of WEP vs. WPA and boost your wireless network security. You&#146;ll sleep better for it.

  Read the article

• Ralink-based USB Wi-Fi adapter drops connection after some time

  - by Hector Aguilar

  I have an Intellinet Wireless 150N USB adapter (based on a Ralink rt3070 chip) in an Ubuntu 10.10 installation. The problem is, that it's dropping the connection after being connected to a wireless network for 10 - 20 minutes. I have to unplug it and plug it in again every time this happens. I read somewhere, that I need to blacklist some chipset modules, but I don't how? And which ralink modules I have to blacklist? Thanks for your answers! :D

  Read the article

• Starship Collage and Size Comparison Chart [Wallpaper]

  - by Asian Angel

  Star Trek, Star Wars, Battlestar Galactica, and more are all included on this awesome collage and comparison chart wallpaper! Sci Fi, Spaceship [Wallpaper Abyss] Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference

  Read the article

• Asus X552VL WI-FI Problem

  - by Mitkobg

  I have a problem with my Wireless on my laptop. When i did rfkill list: 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 4: hci0: Bluetooth Soft blocked: no Hard blocked: no 5: phy1: Wireless LAN Soft blocked: no Hard blocked: yes itko@Mitko:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off mitko@Mitko:~$ lspci -nnk | grep -A2 0280 03:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: AzureWave Device [1a3b:2c97] Kernel driver in use: ath9k mitko@Mitko:~$ lsmod | grep -e ath9k -e asus asus_nb_wmi 16990 0 asus_wmi 24191 1 asus_nb_wmi sparse_keymap 13948 1 asus_wmi ath9k 164164 0 ath9k_common 13551 1 ath9k ath9k_hw 453856 2 ath9k_common,ath9k ath 28698 3 ath9k_common,ath9k,ath9k_hw mac80211 626557 1 ath9k cfg80211 484040 4 wl,ath,ath9k,mac80211 wmi 19177 3 mxm_wmi,nouveau,asus_wmi video 19476 3 i915,nouveau,asus_wmi

  Read the article

• Classic UFO Identification Chart from March 1967 [Retro Image]

  - by Asian Angel

  If you love classic sci-fi goodness, then you will definitely enjoy looking through the various ‘alien’ starcraft featured in this classic chart from yesteryear! View the Full-Size Version (914*1280 pixels) UFO Identification Chart – Stargods Blog [via Cheezburger.com] Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For? HTG Explains: What is DNS?

  Read the article

• RTL8192SU-based Wi-Fi adapter disconnects permanently

  - by leventov

  I've already tried all possible (http://ubuntuforums.org/showpost.php?p=10129571&postcount=43) solutions, no progress. I'm in despair. In Windows (on the same machine) this adapter works stably. Device: Trendnet TEW-649UB. System details: Ubuntu 11.10; leventov@leventov-ubuntu:~$ uname -a Linux leventov-ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux leventov@leventov-ubuntu:~$ lsusb ... Bus 002 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191S WLAN Adapter ... leventov@leventov-ubuntu:~$ dmesg | grep 8712 #current driver [ 8.146510] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 8.147113] r8712u: DriverVersion: v7_0.20100831 [ 8.147124] r8712u: register rtl8712_netdev_ops to netdev_ops [ 8.147127] r8712u: USB_SPEED_HIGH with 4 endpoints [ 8.147478] r8712u: Boot from EFUSE: Autoload OK [ 8.551272] r8712u: CustomerID = 0x0000 [ 8.551275] r8712u: MAC Address from efuse = 00:14:d1:6c:52:19 [ 8.551625] usbcore: registered new interface driver r8712u [ 9.501351] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 10.160471] r8712u: 1 RCR=0x153f00e [ 10.161241] r8712u: 2 RCR=0x553f00e leventov@leventov-ubuntu:~$ lsmod | grep 8712 r8712u 189049 0 t

  Read the article

• Report: 5 Open Source Wi-Fi Hotspot Solutions

  Linux and open source rule the wireless hotspot world, and Eric Geier has rounded up five excellent, feature-packed open source wireless hotspots for us.

  Read the article

• Secure Wi-Fi Video On The Battlefield

  Network security can be a life or death proposition in a war zone. A new product provides secure wireless HD video in a walkie-talkie-sized device for just those scenarios.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >