Search Results

Search found 8782 results on 352 pages for 'krishnadas pc'.

Page 3/352 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Access virtualhosts over LAN (Also in xpmode (Virtual PC))

    - by Pheter
    Hi, I am running Wamp on my computer (the host). I have set up several virtualhosts in apache and they are working fine when I access them from the same computer (host). I have installed Windows XPMode on my computer (which is running windows 7). XPMode (which uses Virtual PC) is set up to use a NAT network. The network in XPMode is working fine, and I can access the host PC via the IP address 192.168.1.5, just as I would if I was using any physical computer on the same network. I can view all the web pages at 192.168.1.5 and it's subdirectories. However, I cannot access any of the subdomains that are configured in the virtualhosts of the host computer. How can I access the subdomains? I don't think that the fact that I am using XPMode and am using a virtualized OS has anything to do with it, but I thought that it was worth mentioning.

    Read the article

  • Best distro for eee-pc [closed]

    - by a_m0d
    Possible Duplicate: A minimal Linux distribution for my ASUS EEE PC I am looking at buying an Asus eee PC and would like some input from the community on the different distros / OS's out there for it. I have heard that the Xandros distro that comes with the net-book isn't that great (lack of software, etc.), but I wonder what all the SuperUsers out there think. Please answer with one distro / OS per answer, and list (at least some of) the advantages and disadvantages of your choice. EDIT: To clarify, the version I am looking at is the 701 SSD, with the 8GB hard drive.

    Read the article

  • Windows 7 Complete PC Backup - Fails with error code: 0x80070002

    - by leeand00
    While doing a Complete PC Backup in Windows 7 I received dialog reading: Windows Backup...error The backup did not complete successfully. Open the Backup and Restore Control Panel to view settings From there I clicked the Options button. Windows Backup: Troubleshooting Options Check your backup Windows Backup encountered invalid MediaID.bin file on the drive where the backup is saved. Restore from a different backup or delete the MediaID.bin file and try to create another backup. The MediaID.bin file can be found under \MediaID.Bin & \\MediaId.Bin. I deleted the file in question (MediaID.bin) from X:\ (one of the drives being backedup( and tried the backup again. Next I was presented with a dialog that read: Windows Backups: Troubleshooting Options Check your backup The system connot find the file specified. Try to run backup again Change backup settings Backup Time: 2/10/2010 12:17 PM Backup location: FreeAgent Drive (E:) Error code: 0x80070002 Additionally I checked the error log and I found this: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Windows Backup" /> <EventID Qualifiers="0">4104</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-02-10T17:17:48.000000000Z" /> <EventRecordID>5107</EventRecordID> <Channel>Application</Channel> <Computer>leeand00-PC</Computer> <Security /> </System> - <EventData> <Data>The system cannot find the file specified. (0x80070002)</Data> <Binary>02000780E30500003F0900005B090000420ED1665C2BEE174B64529CB14610EA71000000</Binary> </EventData> </Event> Viewed the following document: http://blogs.technet.com/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx searched for 0x80070002 and tried and follow the directions... I noticed that none of the profiles was missing a ProfileImagePath, I also noticed that the people commenting on the page said that they weren't missing it either. I'm currently trying the backup again, but this time I unchecked all of the user's profiles and opted only to backup the two drives X: and C: on to E:\ I'll let you know what happens. Any ideas?

    Read the article

  • Read Mobi eBooks on Kindle for PC

    - by Matthew Guay
    Do you use your PC as a eBook reader?  Kindle for PC makes it easy to read thousands of books from the Kindle Store on your computer. What you may not know is that is also works with .mobi format too, so you can increase the amount of books you can read. Amazon has jumpstarted the eBook market with their popular Kindle device.  Last fall Amazon unveiled Kindle for PC, and we reviewed how you can Read Kindle Books On Your Computer with Kindle for PC.  Whether or not you own a Kindle or other eBook reader, this is a great way to take advantage of the thousands of eBooks available from the Kindle Store today. It supports azw, prc, and tpz format, which are sold from the Kindle store, but it also supports Mobipocket (.mobi) eBooks that are not DRM protected.  Here’s how you can add them to Kindle for PC so you can easily read them on your PC Getting Started: First, make sure you have Kindle for PC (link below) installed on your computer. Sign in with your Amazon account when you first run it. Kindle for PC lets you easily read eBooks downloaded from the Kindle Store, but it doesn’t have any way to add other eBooks directly from the program. To add eBooks, you can sometimes download and double-click on the books, and they will open in Kindle for PC and be automatically added to the library.  However, this does not always seem to work. So instead, browse to your Documents folder (simply click on the Documents link on your Start menu), and double-click on the My Kindle Content folder. This folder contains all the Kindle books you have downloaded.  If you have other eBooks you would like to add to Kindle for PC, simply drag-and-drop or copy and paste them into this folder.  Here we have a .mobi formatted book downloaded from the Gutenberg Project that we’re dragging into the folder. Now, close and reopen Kindle for PC.  It should now show your new eBook right beside the eBooks you have downloaded from the Kindle Store. These eBooks work just the same as the ones downloaded from the Kindle store, and you can change font size and add bookmarks just as with other eBooks. The eBooks downloaded this way may show up with either a Amazon logo or a mobile device icon.  You should only see the mobile device icon on .mobi files formatted for mobile devices; other ones should show up with the Amazon logo.  In this screen, Pilgrim’s Progress is a standard .mobi book, The Adventures of Sherlock Holmes is a mobipocket book, and the others are downloaded from the Kindle Store. Conclusion This is a great way to read eBooks from across the internet on Kindle for PC.  Wikipedia’s Kindle page has a list of websites that offer eBooks formatted for the Kindle, so be sure to check it out for more books. Links Download Kindle for PC List of websites that offer eBooks that will work on Kindle – via Wikipedia Similar Articles Productive Geek Tips Read Kindle Books On Your Computer with Kindle for PCInstall Adobe PDF Reader on Ubuntu EdgyHow to Access your Box.Net Account from Ubuntu the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser Scan for Viruses in Ubuntu using ClamAV Replace Your Windows Task Manager With System Explorer Create Talking Photos using Fotobabble

    Read the article

  • Forgot Microsoft Virtual PC's password

    - by Kanini
    I have a Microsoft Virtual PC on which I run Windows 2003 Server. I am right now in the system, but have forgotten the password. So, while I can continue to work now, if I were to lock the computer or shut it down, I am locked out. Questions How can I ensure that the Virtual PC automatic lock does not happen? (Giving me time to try and remember the password or for future users, to look up this question!) How can I find out/reset my password?

    Read the article

  • Nokia Pc Suite problems with bluetooth (win7)

    - by wurlog
    I have a new Nokia C5-00 and a HP 620. The Bluetoothdriver are installed and the windows Bluetoothstack finds the mobile. After installing Nokia PC Suite I am asked to choose a connection method. As I click on Bluetooth the Nokia PC Suite shows an error message: "Cannot use the connection type.Check that all the needd hardware,software and drivers are available. (Code: OpenMedia)" I tried to switch it on and off via the "wireless" key on the laptop. The HP Software for the button shows that the Bluetooth is deactivated and advices me to go to the device manager and activate the Bluetooth device. Strangely the Bluetooth symbol (I guess from the windows Bluetoothstack) pops up at the same time and I can use the Bluetooth in it's basic windows features, but still nokia suite won't work. ideas????

    Read the article

  • How can I fix my Virtual PC 2007 network configuration

    - by DanJ
    Hi, I have installed Windows Virtual PC 2007 on my Windows 2003 R2 Server. I have installed a virtual Windows XP. I have configured the virtual PC to use Shared Networking (NAT) I have disabled the firewall on the virtual windows XP The problem: I am unable to PING from Windows 2003 (the host) to the Windows XP (virtual) I do have normal traffic from the virtual to the internet Could this problem be related to routing? How I can I fix this network configuration to allow for the following traffic: 1. From Virtual to Internet 2. From Host to Virtual 3. If possible, from Internet to Virtual on pre-defined ports (port forwarding?) Thanks

    Read the article

  • Virtual PC 2007 Full Screen Resolution

    - by Swami
    I have a laptop (1440 x 900) and an external monitor (1920 x 1200), and I'm running Virtual PC 2007. Initially, my VPC could not switch to fullscreen mode on my external monitor because the max resolution for VPC was only 1600 x 1200. I installed a hotfix (http://support.microsoft.com/kb/958162) and after the hotfix, I was able to view VPC in fullscreen mode on my external monitor, but now I'm unable to view fullscreen on my laptop. It says "please check that the resolution of the guest is not higher than that of the host". I even tried to decrease the resolution of my Virtual PC to less than than of my laptop, but it always resets it back up. So now after the hotfix, I can view fullscreen mode only when my external monitor is plugged in. Any way I can resolve this?

    Read the article

  • Duplicate Name Exists error from virtual PC with NAT network configuration

    - by Phred
    Whenever I change the network configuration to NAT for a virtual machine running under Virtual PC 2007, I get "A duplicate name exists on the network." error. There is no other machine on my network with this name and running the VM in any other network configuration doesn't cause this error. This seems to be a common problem with Virtual PC 2007 based on a google search but no-one seems to have a solution to it. So far, I've discovered that turning off NETBIOS over TCP causes the problem to go away but I need to join this VM to a domain and you can't do that if NETBIOS over TCP is turned off.

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • EEE PC dropbox server running 24/7

    - by microspino
    I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have Samsung SCX 4521F (fax/print/scan/copy), Samsung ML2010, HP Laser jet P1006, HP Color Laserjet CP1215, HP Office jet pro K8600, HP Design jet 500. All of them now are connected using little print servers and I want to get rid of them hooking everything to this mini server. The fax/print/scan/copy machine need to stay connected to a PC to make me able to use the software that comes with It. The mini server would save me on this too. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: If You have something similar running for a long time If You disagree with this hardware choice and If You would suggest some other device. If You see any issues with my printing setup Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

    Read the article

  • Diagnosing PC crashes (most often while using shared folders or torrents)

    - by Dyppl
    For the last few weeks my PC (pretty old P4 with WinXP SP3) has been crashing randomly. It just suddenly reboots instanteneously. It feels hardware-related but I wasn't able to determine wether it's software or hardware that causes it. I did notice a pattern though: it's more likely to crash when I copy a lot of files over network or have uTorrent running, but sometimes it crashes when I am not doing anything with it. Copying files from it over network causes it to crash in 1 to 10 minutes almost every time. Using torrents causes it to crash every 1-3 hours. With neither or that on it crashes every 24 hours or so. I ruled out the following probable causes: PSU (I bought a new one and turned off most of the drives so the power is sufficient 100%) Bad HDD or interface cable on my SATA disk from which I was originally copying the data over network (bought new SATA cable and later yanked out the HDD completely, PC still crashes without it) Video adapter (AGP slot is now empty, using the onboard VGA at the moment) Network adapter (removed it from PCI, using onboard LAN) CPU (I think: I changed the termopaste and it's temperature is below 50C) RAM (I think: I ran Memtest86 and it didn't show any errors) At the moment I only have only one system HDD and DVD drives, a mouse and a keyboard plugged in. The fact that it crashes most often when I use network extensively makes me think that maybe it's software related (I removed the network adapter from PCI and now am using an onboard one, so network hardware is unlikely to cause problems). I am now pondering system reinstall but it's not a pleasant solution so I decided to ask wether there are better ideas first. If someone can share a good diagnostic tool it would be great because I didn't find anything good. Thanks in advance, I hope that "help to diagnose" questions aren't entirely banned here. EDIT: Motherboard is actually ~4 years old as I replaced it back in 2007

    Read the article

  • Asus EEE PC 1005HA battery not being detected

    - by Imran
    My EEE PC's battery is not being detected since this morning. The battery indicator doesn't turn on, Power Options in Windows doesn't detect a battery either. Apart from removing the battery and plugging it back again (which I already did), what can I do??

    Read the article

  • How to read Mac floppy on a PC?

    - by Robot
    I have a floppy made on a Mac years ago. I'd like to pull some files from it, but Macs haven't had floppies in forever, so I don't have one. I tried an app called MacOpener, but it didn't seem to work, plus it was pretty old. I even tried sharing the PC's A:\ drive and accessing it remotely from a Mac, but that didn't work either. Any ideas?

    Read the article

  • How to read Mac floppy on a PC?

    - by Robot
    I have a floppy made on a Mac years ago. I'd like to pull some files from it, but Macs haven't had floppies in forever, so I don't have one. I tried an app called MacOpener, but it didn't seem to work, plus it was pretty old. I even tried sharing the PC's A:\ drive and accessing it remotely from a Mac, but that didn't work either. Any ideas?

    Read the article

  • Connect to host computer from Virtual PC 2007

    - by Vegard Larsen
    I am having trouble using my guest (Windows XP SP3) to communicate over TCP/IP to the host computer (Windows 7) using Virtual PC 2007. I have WAMPServer running on my host, and want to be able to access the websites on there from my guest OS. What do I do to make this work? What is the IP address of the host computer when using Shared Networking? As far as I can tell "Internal Networking" won't work, because that only allows communication between the guests, not between a guest and the host.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >