Search Results

Search found 338 results on 14 pages for 'miki er'.

Page 3/14 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

  - by digby280

  I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• ??GoldenGate??Manager??

  - by Liu Maclean(???)

  ???????OGG?????????????MGR(Manager)???????,????????./dirprm/mgr.prm???? ????????manager?????: ggsci > edit params mgr ??ggsci edit params???????,???????????? OGG??????????????????????? ???mgr.prm????,??????./dirprm??OGG???????? ???Manager?????????,????????????????????? ????????????????,??????????????????????????????,???????????? PORT 7809 –??MGR?PORT????????,????????TCP?????,?????????????7809?????????? DYNAMICPORTLIST 9101 – 9356DYNAMICPORTSREASSIGNDELAY 5 –???????????source????????,??????target????????? PURGEOLDEXTRACTS ./dirdat/*, usecheckpoints, minkeephours 96 Manager????trail?????????,minkeephours 96????96????4???trail LAGINFOSECONDS 15LAGCRITICALMINUTES 2 ??2??????LAG REPORT????? BOOTDELAYMINUTES 3 ??BOOTDELAYMINUTES??windows??,??Windows??3????BOOT OGG MGR AUTOSTART ER * AUTOSTART ???MGR????????EXTRACT?REPLICAT AutoRestart ER *, WaitMinutes 5, Retries 3 AUTORESTART ?????????OGG??,?????????? PurgeMarkerHistory MinKeepDays 3, MaxKeepDays 7, FrequencyMinutes 120 ??PurgeMarkerHistory?????DDL?????? CHECKMINUTES 10 CHECKMINUTES ??? MGR????????,?????10???? DOWNCRITICAL ?????OGG???abend??????????,?????DOWNCRITICAL??,??????? ??Manager?????????,???????????,manager????????? OGG??????Manager????????????Extract?Replicat?Manager??????,??Manager????????Manager????,????????????????,Refresh???MGR?????????? ??????MGR PARAMS GGSCI (XIANGBLI-CN) 2> view params mgr Port 7809 UserId goldengate, Password goldengate CheckMinutes 10PurgeOldExtracts ./dirdat/*, UseCheckpoints, MinKeepHours 96PurgeMarkerHistory MinKeepDays 3, MaxKeepDays 7, FrequencyMinutes 120AutoRestart ER *, WaitMinutes 5, Retries 3LagInfoMinutes 0LagReportMinutes 10 GGSCI (XIANGBLI-CN) 4> start mgr Manager started.

  Read the article

• Setting up linux based small office network

  - by Miki

  I like to setup a Server and Workstation sort of network in linux (like we have Domain Controller in windows) where all the desktops login where authenicated with server, how this can be done. I prefer CENTOS 5.4 for server and FEDORA 12 for dektop Thanks in advance

  Read the article

• Setting up linux based small office network

  - by Miki

  I like to setup a Server and Workstation sort of network in linux (like we have Domain Controller in windows) where all the desktops login where authenicated with server, how this can be done. I prefer CENTOS 5.4 for server and FEDORA 12 for dektop Thanks in advance

  Read the article

• Imdb database movie links

  - by miki

  Hi I have a list of movies in a text file. I would like some way to automatically obtain the imdb movie hyperlinks for each item in my list. Is this possible?? Thanks

  Read the article

• Create a video file from PGM files

  - by miki

  Hi Is it possible to create a video file (playable in vlc) from a collection of pgm files. I would like to do this in python. Thanks

  Read the article

• Custom settings with PHP on Nginx

  - by miki

  I have multiple websites setup using Nginx and Apache, but when I try to add a vhost based PHP directive using fastcgi_param PHP_VALUE , the value get added to all of my vhosts. Checking the value of the PHP parameter from PHP-CLI remain the actual one for whole server. e.g. I used fastcgi_param PHP_VALUE "memory_limit=512M" for a domain based nginx config, but it will be propagated to all domains on server. The 'php -i | grep memory_limit' show 128M though Not sure what I am missing

  Read the article

• Excel VBA Userform Combobox problem

  - by Marc

  I'm having difficulties with a Combobox in a userform in an Excel document. The combobox either doesn't appear in the userform, or the combobox remains blank, and when I enter any character in it, the list of items appears, but 2 or 3 times, instead of just once. When I select an item, the chosen item doesn't appear in the box. It seems as if Excel^picks one at random, and whichever item I choose from the list, it's always the same one that ends up being displayed in the box. Can anyone help me on this one? Thanks a lot!!! This is the code I used: Private Sub ComboBox1_Change() Select Case ComboBox1.Text Case "Een nieuwe start" Case "Alles heeft zijn tijd" Case "De wereld aan je voeten" Case "Een levend boek" Case "Drempels" Case "Kerstmis" Case "Confituur of choco" Case "Hoe groot is de hemel?" Case "Ongelovige Thomas" Case "Feesten" Case "Er is er één jarig!" Case "Eén van hart" Case "Ervoor gaan" Case "Groen gras" Case "RELatie" Case "Vele plaatjes" Case "Iedereen fan" Case "Schattenjacht" Case "Lichtbakens" Case "Rijke Luis" Case "Hemel op aarde" Case "Op bezoek" Case Else End Select End Sub Private Sub UserForm1_Initialize() ComboBox1.Clear ComboBox1.AddItem "Een nieuwe start" ComboBox1.AddItem "Alles heeft zijn tijd" ComboBox1.AddItem "De wereld aan je voeten" ComboBox1.AddItem "Een levend boek" ComboBox1.AddItem "Drempels" ComboBox1.AddItem "Kerstmis" ComboBox1.AddItem "Confituur of choco" ComboBox1.AddItem "Hoe groot is de hemel?" ComboBox1.AddItem "Ongelovige Thomas" ComboBox1.AddItem "Feesten" ComboBox1.AddItem "Er is er één jarig!" ComboBox1.AddItem "Eén van hart" ComboBox1.AddItem "Ervoor gaan" ComboBox1.AddItem "Groen gras" ComboBox1.AddItem "RELatie" ComboBox1.AddItem "Vele plaatjes" ComboBox1.AddItem "Iedereen fan" ComboBox1.AddItem "Schattenjacht" ComboBox1.AddItem "Lichtbakens" ComboBox1.AddItem "Rijke Luis" ComboBox1.AddItem "Hemel op aarde" ComboBox1.AddItem "Op bezoek" ComboBox1.Text = ComboBox1.List(0) End Sub

  Read the article

• Which linux distro for a laptop in windows environmet?

  - by Dev er dev

  I just got new laptop at work. What would you recommend as a linux distribution for it? All other developers are working under windows, and use windows tools. I'm currently using ArchLinux, but want to change it. I don't want to waste time configuring wireless, windows network shares, network pritners, projector, etc ... I want this stuff to just work, while still having sane and stable development evironment and tools. Is Ubuntu a good choice for this? I use gentoo at home, but don't think it is a good match for work environmet. EDIT: Note that we are working on cross platform apps, and deployment platform is almost always linux. There are very few windows apps that I have to use (like MS Project). It is just that everything else is windows centric. I use linux because I feel more productive with it, even if I have to dual boot to edit MS Project files.

  Read the article

• wifi connection turns off oll the time

  - by er-v

  Hello! I realy need help with one strange problem. I have a wifi network in my appartment with wireless N home router Trendnet tew-652BRP. Everething work fine for three of my laptops, but I have one PC with D-Link DWA-140 adapter. It looses connection 2-3 times in 5 minutes. There is following messages in my system log when it does so: The browser has forced an election on network \Device\NetBT_Tcpip_{9537A5C1-3B43-4C56-B94C-CE69A257C3AD} because a master browser was stopped. The TCP/IP NetBIOS Helper service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)] Comment: None The TCP/IP NetBIOS Helper service entered the stopped state. in order of appearence. How can I stop it? I have the latest driver installed.

  Read the article

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Hard Disk DRDY error: is it a crash

  - by pranjal

  I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

  Read the article

• m:n relationship must have properties?

  - by nax

  I'm doing a E/R model for a project. I finished the ER model and, for me, all is okay. Maybe not perfect, but it's okay. When I gave the ER model to my teacher, he told me this: "the m:n relations MUST HAVE some properties" He said if the m:n relationship doesn't have the properties it will be wrong. In my opinion m:n doesn't need forcer attributes to the relationship, but if you have someone that can fit in it, just put there. What do you think? Who is wrong in this, me, or my teacher? NOTE: Reading again, it seems what he said was not due to my ER diagram, but was a general statement. The diagram I gave him doesn't have relations yet, so there where just entities and atributes.

  Read the article

• Setting up linux based small office network

  - by Miki

  I like to setup a Server and Workstation sort of network in linux (like we have Domain Controller in windows) where all the desktops login where authenicated with server, how this can be done. I prefer CENTOS 5.4 for server and FEDORA 12 for dektop Thanks in advance

  Read the article

• Visual studio winform designer shows design errors as text rather than html

  - by Miki Watts

  All of the sudden, visual studio displays designer errors as plain html text, for example: <DIV id="div1" class="ErrorStyle" width="100%"><span style="font-weight: 600"><br>Object reference not set to an instance of an object. </span><br><a href="" instead of displaying the usual html formatted. I haven't been able to find anything similar to it on google. Before getting this problem, when I tried opening the winform designer, I would get the run/save/cancel dialog of internet explorer for a .tmp file, instead of the designer window. That went away when I found out that I had notepad assigned to the .tmp file type and removed that. Any ideas how to fix this?

  Read the article

• Code review tool for Vault

  - by Miki Watts

  We're using Vault from SourceGear as our source control repository. Does anyone know if there's a code review tool that can work with Vault, or something that can work with local files ? I've checked the related questions, but I didn't see something that works with local files (of course I may have just missed it).

  Read the article

• high cpu in IIS

  - by Miki Watts

  Hi all. I'm developing a POS application that has a local database on each POS computer, and communicates with the server using WCF hosted in IIS. The application has been deployed in several customers for over a year now. About a week ago, we've started getting reports from one of our customers that the server that the IIS is hosted on is very slow. When I've checked the issue, I saw the application pool with my process rocket to almost 100% cpu on an 8 cpu server. I've checked the SQL Activity Monitor and network volume, and they showed no significant overload beyond what we usually see. When checking the threads in Process Explorer, I saw lots of threads repeatedly calling CreateApplicationContext. I've tried installing .Net 2.0 SP1, according to some posts I found on the net, but it didn't solve the problem and replaced the function calls with CLRCreateManagedInstance. I'm about to capture a dump using adplus and windbg of the IIS processes and try to figure out what's wrong. Has anyone encountered something like this or has an idea which directory I should check ? p.s. The same version of the application is deployed in another customer, and there it works just fine. I also tried rolling back versions (even very old versions) and it still behaves exactly the same. Edit: well, problem solved, turns out I've had an SQL query in there that didn't limit the result set, and when the customer went over a certain number of rows, it started bogging down the server. Took me two days to find it, because of all the surrounding noise in the logs, but I waited for the night and took a dump then, which immediately showed me the query.

  Read the article

• Creating XML file from XSD

  - by miki-er

  I have to convert a dll file to XML in command line. I've created an xsd file fron the dll (by the command :xsd.exe ---.dll) now I'm searching command that can create the XML. Can so,one help me??

  Read the article

• Hochkaräter für Middleware

  - by A&C Redaktion

  Seit Mitte 2010 ist die virtual7 GmbH zertifizierter Oracle Platinum Partner. Das Software- und Beratungsunternehmen setzt den Schwerpunkt seiner Arbeit auf Beratung und die Durchführung von Middleware-Projekten im Oracle Umfeld. Nur ein Jahr später wurde virtual7 als OPN Specialized Middleware Partner des Jahres ausgezeichnet! Marcus Weiss, der Geschäftsführer von virtual7, hat klare Ziele für die Zukunft seines Unternehmens. Er weiß, dass der Markt für vernetzte Datensysteme weiter wachsen wird. Daher setzte er auf höchste Qualität und technologische Expertise. Im Oracle Webcast spricht Weiss über die Schwerpunkte des Unternehmens und die Besonderheiten in der Zusammenarbeit mit Oracle.

  Read the article

• Hochkaräter für Middleware

  - by A&C Redaktion

  Seit Mitte 2010 ist die virtual7 GmbH zertifizierter Oracle Platinum Partner. Das Software- und Beratungsunternehmen setzt den Schwerpunkt seiner Arbeit auf Beratung und die Durchführung von Middleware-Projekten im Oracle Umfeld. Nur ein Jahr später wurde virtual7 als OPN Specialized Middleware Partner des Jahres ausgezeichnet! Marcus Weiss, der Geschäftsführer von virtual7, hat klare Ziele für die Zukunft seines Unternehmens. Er weiß, dass der Markt für vernetzte Datensysteme weiter wachsen wird. Daher setzte er auf höchste Qualität und technologische Expertise. Im Oracle Webcast spricht Weiss über die Schwerpunkte des Unternehmens und die Besonderheiten in der Zusammenarbeit mit Oracle.

  Read the article

• ??GoldenGate Replicat?HANDLECOLLISIONS??

  - by Liu Maclean(???)

  HANDLECOLLISIONS?????goldengate????????REPLICAT??,???????????????????,???????????????????????????,??????????????????????????reperror????????discard??,????????????????,??????(????error mapping????,???????discard??),??????????????;?????????????????,????????? ??HANDLECOLLISIONS?????: target??delete??(missing delete),??????????discardfile target??update??(missing update) ????????=» update???INSERT ,???????????? ?????????=» ??????????discardfile ????????????target??,???replicat???UPDATE?????????????? ??1 target??delete??(missing delete) : C:\Users\ML>sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Tue Sep 18 13:38:03 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> conn sender/oracle Connected. SQL> create table handlec(t1 int primary key,t2 int); Table created. SQL> insert into handlec values(1,2); 1 row created. SQL> insert into handlec values(3,2); 1 row created. SQL> insert into handlec values(4,2); 1 row created. SQL> commit; Commit complete. SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 3 2 4 2 target : SQL> conn receiver/oracle Connected. SQL> create table handlec(t1 int primary key,t2 int); Table created. SQL> insert into handlec values(1,2); 1 row created. SQL> commit; SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 SQL> GGSCI (XIANGBLI-CN) 1> alter extract load2 , begin now EXTRACT altered. GGSCI (XIANGBLI-CN) 4> alter replicat rep2, begin now REPLICAT altered. GGSCI (XIANGBLI-CN) 13> add trandata sender.* Logging of supplemental redo data enabled for table SENDER.HANDLEC. Logging of supplemental redo log data is already enabled for table SENDER.TV. GGSCI (XIANGBLI-CN) 14> start mgr MGR is already running. GGSCI (XIANGBLI-CN) 15> start er * Sending START request to MANAGER ... EXTRACT LOAD2 starting Sending START request to MANAGER ... REPLICAT REP2 starting GGSCI (XIANGBLI-CN) 16> info all Program Status Group Lag at Chkpt Time Since Chkpt MANAGER RUNNING EXTRACT RUNNING LOAD2 00:00:00 00:00:01 REPLICAT RUNNING REP2 00:00:00 00:00:08 ***SOURCE?????TARGET????? SQL> delete handlec where t1=3; 1 row deleted. SQL> commit; Commit complete. ??SQL error 1403??,REPLICAT ABORT 2012-09-18 13:45:48 WARNING OGG-01004 Aborted grouped transaction on 'RECEIVER.HANDLEC', Database error 1403 (OCI Error ORA-01403: no data found, SQL ). 2012-09-18 13:45:48 WARNING OGG-01003 Repositioning to rba 1091 in seqno 3. 2012-09-18 13:45:48 WARNING OGG-01154 SQL error 1403 mapping SENDER.HANDLEC to RECEIVER.HANDLEC OCI Error ORA-01403: no data found, SQL . 2012-09-18 13:45:48 WARNING OGG-01003 Repositioning to rba 1091 in seqno 3. Source Context : SourceModule : [er.errors] SourceID : [er/errors.cpp] SourceFunction : [take_rep_err_action] SourceLine : [623] ThreadBacktrace : [8] elements : [D:\ogg\V34342-01\gglog.dll(??1CContextItem@@UEAA@XZ+0x3272) [0x000000018010BDD2]] : [D:\ogg\V34342-01\gglog.dll(?_MSG_ERR_MAP_TO_TANDEM_FAILED@@YAPEAVCMessage@@PEAVCSourceContext@@AEBV?$CQualDBObjName@$00@ggapp@gglib@ggs@@1W4MessageDisposition@CMessageFactory@@@Z+0x138) [0x00000001800AD508]] : [D:\ogg\V34342-01\replicat.exe(ERCALLBACK+0x6e1e) [0x0000000140099D5E]] : [D:\ogg\V34342-01\replicat.exe(shutdownMonitoring+0x4411) [0x00000001400C9BE1]] : [D:\ogg\V34342-01\replicat.exe(shutdownMonitoring+0x289cd) [0x00000001400EE19D]] : [D:\ogg\V34342-01\replicat.exe(CommonLexerNewSSD+0x9440) [0x00000001402AE980]] : [C:\windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007733652D]] : [C:\windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007746C521]] 2012-09-18 13:45:48 ERROR OGG-01296 Error mapping from SENDER.HANDLEC to RECEIVER.HANDLEC. *********************************************************************** * ** Run Time Statistics ** * *********************************************************************** Last record for the last committed transaction is the following: ___________________________________________________________________ Trail name : D:\ogg\V34342-01\ex\ze000003 Hdr-Ind : E (x45) Partition : . (x04) UndoFlag : . (x00) BeforeAfter: B (x42) RecLength : 9 (x0009) IO Time : 2012-09-18 13:45:38.000000 IOType : 3 (x03) OrigNode : 255 (xff) TransInd : . (x03) FormatType : R (x52) SyskeyLen : 0 (x00) Incomplete : . (x00) AuditRBA : 44 AuditPos : 3337232 Continued : N (x00) RecCount : 1 (x01) 2012-09-18 13:45:38.000000 Delete Len 9 RBA 1091 Name: SENDER.HANDLEC ___________________________________________________________________ Reading D:\ogg\V34342-01\ex\ze000003, current RBA 1091, 0 records Report at 2012-09-18 13:45:48 (activity since 2012-09-18 13:45:48) From Table SENDER.HANDLEC to RECEIVER.HANDLEC: # inserts: 0 # updates: 0 # deletes: 0 # discards: 1 Last log location read: FILE: D:\ogg\V34342-01\ex\ze000003 SEQNO: 3 RBA: 1091 TIMESTAMP: 2012-09-18 13:45:38.000000 EOF: NO READERR: 0 2012-09-18 13:45:48 ERROR OGG-01668 PROCESS ABENDING. 2012-09-18 13:45:48 INFO OGG-01237 Trace file D:\ogg\V34342-01\REP_TRACE1.TRC closed. 2012-09-18 13:45:48 INFO OGG-01237 Trace file D:\ogg\V34342-01\REP_TRACE2.TRC closed. CACHE OBJECT MANAGER statistics CACHE MANAGER VM USAGE vm current = 0 vm anon queues = 0 vm anon in use = 0 vm file = 0 vm used max = 0 ==> CACHE BALANCED CACHE CONFIGURATION cache size = 2G cache force paging = 3.41G buffer min = 64K buffer highwater = 8M pageout eligible size = 8M ================================================================================ ??skiptransaction???????? GGSCI (XIANGBLI-CN) 18> start rep2 skiptransaction Sending START request to MANAGER ... REPLICAT REP2 starting ??2 target??update??(missing update),???????? : ???????, ??source????????? SQL> update handlec set t1=5 where t1=4; 1 row updated. SQL> commit; Commit complete. ???target ????(miss update)??????? Database error 1403+OGG-01296 2012-09-18 13:49:30 WARNING OGG-01004 Aborted grouped transaction on 'RECEIVER.HANDLEC', Database error 1403 (OCI Error ORA-01403: no data found, SQL <UPDATE "RECEIVER"."HANDLEC" SET "T1" = :a1 WHERE "T1" = :b0>). 2012-09-18 13:49:30 WARNING OGG-01003 Repositioning to rba 1218 in seqno 3. 2012-09-18 13:49:30 WARNING OGG-01003 Repositioning to rba 1218 in seqno 3. Source Context : SourceModule : [er.errors] SourceID : [er/errors.cpp] SourceFunction : [take_rep_err_action] SourceLine : [623] ThreadBacktrace : [8] elements : [D:\ogg\V34342-01\gglog.dll(??1CContextItem@@UEAA@XZ+0x3272) [0x000000018010BDD2]] : [D:\ogg\V34342-01\gglog.dll(?_MSG_ERR_MAP_TO_TANDEM_FAILED@@YAPEAVCMessage@@PEAVCSourceContext@@AEBV?$CQualDBObjName@$00@ggapp@gglib@ggs@@1W4MessageDisposition@CMessageFactory@@@Z+0x138) [0x00000001800AD508]] : [D:\ogg\V34342-01\replicat.exe(ERCALLBACK+0x6e1e) [0x0000000140099D5E]] : [D:\ogg\V34342-01\replicat.exe(shutdownMonitoring+0x4411) [0x00000001400C9BE1]] : [D:\ogg\V34342-01\replicat.exe(shutdownMonitoring+0x289cd) [0x00000001400EE19D]] : [D:\ogg\V34342-01\replicat.exe(CommonLexerNewSSD+0x9440) [0x00000001402AE980]] : [C:\windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007733652D]] : [C:\windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007746C521]] 2012-09-18 13:49:30 ERROR OGG-01296 Error mapping from SENDER.HANDLEC to RECEIVER.HANDLEC. ??HANDLECOLLISIONS?,rep??????????discard?? GGSCI (XIANGBLI-CN) 23> view params rep2 replicat rep2 userid receiver , password oracle trace ./rep_trace1.trc trace2 ./rep_trace2.trc ASSUMETARGETDEFS HANDLECOLLISIONS map sender.*, target receiver.*; GGSCI (XIANGBLI-CN) 18> start rep2 SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 5 ????T1=5 T2 NULL?????? ,??update?????????????,??replicat??????????????update????????????????,?????T2 ?NULL ,????????????EXTRACT??PKUPDATE??? ????????FETCHOPTIONS FETCHPKUPDATECOLS ????????EXTRACT?????,???EXTRACT? ????extract???????????? ??????: SQL> conn receiver/oracle Connected. SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 10 100 5 20 200 SQL> delete handlec where t1=5; 1 row deleted. SQL> commit; Commit complete. SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 10 100 20 200 SQL> conn sender/oracle Connected. SQL> update handlec set t1=t1+1000 where t1=5; 1 row updated. SQL> commit; Commit complete. SQL> conn receiver/oracle Connected. SQL> SQL> SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 10 100 20 200 1005 2 ???????FETCHOPTIONS FETCHPKUPDATECOLS??????redo image???trail?,????primary key?????HANDLECOLLISIONS????target??????????? ??3 ????????????target??,???replicat???UPDATE??????????????: *** TARGET SQL> conn receiver/oracle Connected. SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 10 9 5 target????? t1=10 t2=9??? ,????source???(10,100)??? >>SOURCE SQL> insert into handlec values(10,100); 1 row created. SQL> commit; >>TARGET SQL> select * from handlec; T1 T2 ---------- ---------- 1 2 10 100 5 ???????source?insert??,???target???????????????HANDLECOLLISIONS?REPLICAT???UPDATE??????COLUMNS ?? HANDLECOLLISIONS?????goldengate????????REPLICAT??,???????????????????,???????????????????????????,??????????????????????????reperror????????discard??,????????????????,??????,??????????????;?????????????????,????????? ??HANDLECOLLISIONS?????: target??delete??(missing delete),??????????discardfile target??update??(missing update) ????????=» update???INSERT ,???????????? ?????????=» ??????????discardfile ????????????target??,???replicat???UPDATE?????????????? ?:???????????Insert/Delete??,????????????????Replicat?????abend,????? ???????????,??target??HANDLECOLLISIONS??update??,?????INSERT??????,???????????????,FETCHOPTIONS FETCHPKUPDATECOLS??????redo image???trail?,????primary key?????HANDLECOLLISIONS????target??????????? ??????send ??????HANDLECOLLISIONS GGSCI (XIANGBLI-CN) 29> send rep2, NOHANDLECOLLISIONS Sending NOHANDLECOLLISIONS request to REPLICAT REP2 ... REP2 NOHANDLECOLLISIONS set for 1 tables and 0 wildcard entries

  Read the article

• Why model => model.Reason_ID turns to model =>Convert(model.Reason_ID)

  - by er-v

  I have my own html helper extension, wich I use this way <%=Html.LocalizableLabelFor(model => model.Reason_ID, Register.PurchaseReason) %> which declared like this. public static MvcHtmlString LocalizableLabelFor<T>(this HtmlHelper<T> helper, Expression<Func<T, object>> expr, string captionValue) where T : class { return helper.LocalizableLabelFor(ExpressionHelper.GetExpressionText(expr), captionValue); } but when I open it in debugger expr.Body.ToString() will show me Convert(model.Reason_ID). But should model.Reason_ID. That's a big problem, becouse ExpressionHelper.GetExpressionText(expr) returns empty string. What a strange magic is that? How can I get rid of it?

  Read the article

• Handlers returns 404 error on IIS7.5 integrated pipeline

  - by er-v

  <httpHandlers> <add path="ajaxpro/*.ashx" verb="POST,GET" type="AjaxPro.AjaxHandlerFactory, AjaxPro.2" /> <add path="Reserved.ReportViewerWebControl.axd" verb="*" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" validate="false" /> <remove verb="*" path="*.asmx" /> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpHandlers> Hello to everybody. I have the problen whith iis7.5 in integrated mode. When I use it in classic mode handlers that presented above work fine, but if I switch to the integrated pipeline - all requests that should be handled return 404 error. Why?

  Read the article

• Does anyone know of a GUI library for the IO language

  - by Dev er dev

  Io is a nice cross-platform prototype-based object-oriented language. Does anyone know of any GUI library for Io? Io's name does not make it Google friendly.

  Read the article

• Refferenced by projects .net 4.0 assemblies have no IL. How? and What for?

  - by er-v

  There is something I don't understand. Today I desided to find out what is inside Sistem.Web.dll version 4.0.0.0 So I decided to find the place where this assembly located. and opened this assembly with reflector - all methods were empty - and then with ilDasm from 7.0 SDK. This what I saw After some research I've found fullfeatured assemblies in gac. Actualy here C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Web\82087f17d3b3f9c493e7261d608a6af4 They are much larger in size. So why does references goes not to the gac, but to the C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework.NETFramework\v4.0\ Why don't they have IL inside? How does it works? Mabe I don't understand something.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >