Search Results

Search found 1051 results on 43 pages for 'nic foster'.

Page 3/43 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• A duplicate name has been detected on the TCP network

  - by MSedm

  When I installed my domain controller and DNS, I had 2 NIC on the server. Both NIC has its own IP address. NICs are not teamed, they are seperate and ip address are in the same subnet. Both IP address are now registered in the DNS. i found them in Forward and reverse lookup zone. Everything working ok except the following error in the event log. "A duplicate name has been detected on the TCP network......" Now I have realized that this is because of the second NIC. My question is if i disable the second NIC, what happen to those DNS record assiciated with the second ip address? How do I remove all the DNS recored for the disabled NIC? There are A record, some record with the name (same as parent folder), PTR record and may be more. How do i disable second NIC and remove all the associated DNS recoreds? Please help.

  Read the article

• WOL not working with two NIC's

  - by amazinghorse24

  We have recently moved from a windows 2003 server to an 08 R2. Running the program from the command line says that the magic packet has successfully been sent but it never actually reached the destination computer. We have two NIC's on the server. If I disable the NIC that isn't (currently) in use, WOL will work fine, but in the future we will need to use both NIC's. Also, we use MAC Addresses for WOL.

  Read the article

• Best Practice: iDRAC & NIC Selection

  - by Josh Brower

  I am setting up a new Dell server with iDRAC 6 Express. My options for the NIC are: 1) Shared 2) Shared with failover to LOM2 3) Shared with failover to all LOMs The server has 2x dual-nic PCI-E cards (total of 4 nics) My questions are thusly: -What is best practice for setting this up? Is there any reason why I would not want option 3? -If the NIC is being used for both iDRAC and the OS, (there is no dedicated iDRAC nic), does this ever cause any kinds of issues for either iDRAC or the OS? Thanks- -Josh

  Read the article

• Disabling at application level a nic (network interface) on Windows

  - by Leandro

  How can I disable at application level a network interface? The main question is this: If I disable the nic trough wmic (win7) or devcon (XP), the "plug and play" of a wired nic doesn't work any more. For example, if the user put the cable on a disabled nic, the OS doesn't know about it. So I need to persist the enable condition but disabling the networking like a disable nic. There's some API, network configuration (routing, changing ip, changing gateway, any), .NET Framework resource (Only NetFramework 2.0) or do you can think in any workaround to do this? Suggest and ideas also will be treated as a solution. Thanks and kind regards.

  Read the article

• Routing traffic to a specific NIC in Windows

  - by Stoicpoet

  I added a 10GB NIC to a SQL server which is connected over to a backend storage using ISCSI. I would like to force traffic going to a certain IP address/host to use the 10gb NIC, while all other traffic should continue to use the 1GB NIC. The 10gb nic is configured using a private network. So far I have added a entry in the host file to the host I want to go over the private network and when I ping the host, it does return the private IP, but I'm still finding traffic going to the 1gb pipe. How can I force all traffic to this host to use the 10gb interface? Would the best approach be a static route? 160.205.2.3 is the IP to the 1gb host, I actually want to the traffic to route over an interface assigned 172.31.3.2, which is also defined as Interface 22. That said, would this work? route add 160.205.2.3 mask 255.255.255.255 172.31.3.2 if 22

  Read the article

• Issues in Fedora detecting on board NIC card

  - by Vivek27

  Basically I have two NIC cards (on-board + Added in PCI slot) on my Linux machine running Fedora 12.By default the OS detects the NIC card in the PCI slot but it fails to detect the on board network card.Following are few details of the same Linux Vivek 2.6.32.26-175.fc12.i686.PAE #1 SMP Wed Dec 1 21:45:50 UTC 2010 i686 i686 i386 GNU/Linux ifconfig -a doesen't show the on board NIC card.Any thoughts for it please? Since it is also related to network configuration. I posted it here.

  Read the article

• Setting up VMWare ESXi 5 with a single physical NIC

  - by deed02392

  I have a cheap but powerful dedicated server I am leasing with OVH, because they were recently having a promotion. I would like to try and manage all this power by playing with VMs using ESXi. However I am only provided with a single NIC. I had thought this would be easy to get around since, at home I have a single NIC which is my broadband modem, and yet a simple NAT gateway device happily provides internet access to all my devices. I am struggling to implement this on ESXi, though. Can anyone advise on how I could go about having ESXi and multiple VMs working with just one NIC? Here's my current setup: I believe all I need is to be able to configure NAT from the NIC to all the VMs etc.. How would I set up and administer this kind of infrastructure?

  Read the article

• Use hotplug and turn on/off PCI device for replacing NIC

  - by Ryota Hashimoto

  How can I turn off the PCI slots and change the device (especially NIC) without shutting the server down? I found a similar question (How do I turn off PCI devices?) but there are no /sys/bus/pci/slot and no files in /sys/bus/pci/slots. I'm using 12.04 LTS. $ uname -a Linux d1-c1-r1-p1 3.2.0-38-generic #61-Ubuntu SMP Tue Feb 19 12:18:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux $ lspci | grep Eth 04:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 04:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 09:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) 09:00.1 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) $ ls /sys/bus/pci/ devices/ drivers_probe slots/ drivers/ rescan uevent drivers_autoprobe resource_alignment $ ls /sys/bus/pci/devices/0000\:04\:00.0/ broken_parity_status driver modalias rescan subsystem class enable msi_bus reset subsystem_device config firmware_node net resource subsystem_vendor consistent_dma_mask_bits irq numa_node resource0 uevent device local_cpulist power resource2 vendor dma_mask_bits local_cpus remove resource3

  Read the article

• Network adapters reliability

  - by casey_miller

  Can you help me with understanding of reliability of network adapters. Most of the time servers do have at least 2 NIC's bonded to provide sort of a HA for it. So in case of one NIC fails, the second would still do the job. I wonder which factors work when you use network adapters. I know that, the most important and weakest part of any computer system is: storage (i.e HDD). but how reliable actually network adapters are? There are more expensive ones, and cheaper adapters. In which cases do they actually fail? In what circumstances. May it be a intensive usage of them Time when it's on In your experience how often you found yourself changing NIC's due to their fail? Or just what's the typical lifetime of commodity NIC's? thanks.

  Read the article

• connecting to server with multiple nics in other vlan

  - by Thierry

  I have a windows 2003 server with 3 nics on 3 vlan's (this is in domain 1). nic 1 has a default gateway to my router/firewall (sonicwall). In nic 2 and 3 I have left it empty, because it is advised like that everywhere. Within this domain and VLAN's 1-3 everything works fine. BUT... I have a second domain (domain 2) with a 4th Vlan (all 4 VLAN's connected to the same router/firewall) from which my clients need to access the 2003 server in domain 1 (it's my antivirus management console for both domains). when i ping the server from my vlan4 by it's FQDN, it randomly chooses ip from nic 1, 2 or 3 from my 2003 server. (logically because that server is know in DNS with it's 3 IP-addresses. And that is needed for my VLAN's 1-3) I don't really have a problem with that. BUT, I only get an answer of NIC1 (which sounds logically to me, because it's the only one with a gateway). It is not a router problem, because I'm testing in this phase and ping from vlan4 to any machine in vlan1, 2 or 3 that has 1 nic works just fine. If i add a gateway to nic2 and nic3, I get answer from all 3 nics and this works fine. But I know it's adviced to not do that. Can anyone give me advice in this particular case? Would it really be a problem to add a gateway to nic 2 and 3? They would be pointing to the same router/firewall (only with different ip-address, based on the vlan). Or is there another good solution to fix this problem? Thank's in advance, Thierry.

  Read the article

• I have a WinXP machine with 2 ethernet ports. One is connected to a LAN, another is connected to a WAN. How do I make this work?

  - by HappyEngineer

  I have a WinXP machine which has 2 ethernet ports. The information I've found indicates that the first nic in the advanced settings list is the one that receives all traffic. I'd like to configure them so that all traffic destined for a particular IP range goes to one nic and the rest goes to the other nic. Is that possible? If so, do I need additional software like zonealarm to shape the traffic?

  Read the article

• How to see all nics in Solaris 8/9

  - by help_me

  I have a questions regarding how to see all NICS in the solaris 8/9 SPARC boxes. Even if they are active/inactive. dladm show-link command does not work. cat /etc/path_to_inst could but it's hard to make out the NICS. Also when a cable is disconnected from the NIC ifconfig -a still shows the NIC as "UP/RUNNING" without looking at the system message, is there a way to know that the NIC is unplugged? Thank you!

  Read the article

• Windows 7 Multi-NIC woes

  - by Eric

  I have Comcast business Internet here. It gives me 5 static IPs. Most of the machines in my house connect to a router like every other household. It has a 192.168.117.x subnet, DHCP Server, etc. and all is well. However, I have a second machine on MY desk that has a life Internet IP. Up until yesterday, this machine was running XP Pro. The primary NIC was manually set to 192.168.117.241 with no gateway, and the secondary NIC was manually set to 173.x.x.171 with a gateway of 173.x.x.174. This worked just fine for years. Yesterday I replaced that XP machine with a brand new Windows 7 x64 box. Again, I configured it the same way. The onboard NIC was given a static 192.168.117.x address with no gateway, and the secondary NIC was given a live Internet IP address with the proper router, etc. 2 Problems. First is that the internal network (192.168.117.x) is listed as a public network because there's no gateway, so that means no homegroup, no file sharing, none of that. And I can't change it from what I'm reading... The second is that the machine reports the "router" ip address as it's address, and not the address that it's supposed to. I'm ready to tear my hair out over this. Any ideas?

  Read the article

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• pptp server 2003 hands out gateway from nic not dhcp server

  - by Pete

  I have created a pptp RRAS server for a handful of clients to connect to. I would like them to use the servers default gateway (.1) for internet access. They are able to successfully connect (& see LAN) but it then cuts them off the internet. I understand that all internet traffic would be routed through the pptp server but that's ok since I have enough pipe. The problem seems to be that: the clients gateway shows as their assigned RAS ip. The clients assigned DNS settings seem to be what is set to the servers nic not what I have specified in dhcp (which is the same server). DHCP relay agent properties points to the nic DHCP is running on (192.168.100.163). .1 is gateway in nic hw properties & dhcp. I have different dns secondary & third entries on my nic properties than what dhcp is configured for. The problem is that I have a 10.10.1.x network that people can not see if they uncheck the gateway option but, they are then unable to see our other hosted sites on the internet.

  Read the article

• Broadcom NIC Teaming with Hyper-V R2

  - by Brian McCleary

  I have read a few contradictory articles regarding support or at least configuration with teaming of Broadcom NIC's and Hyper-V. I have a pair of Dell R805's with 4 Broadcom 5708 NIC's in them. I have teamed them up (one team for public connections and one for private connections) and I have installed Hyper-V. I am getting some intermittent connection issues though and I'm concerned that it might be due to the teaming. Basically I am wondering if anyone has successfully setup NIC teaming in the parent partition and used the teamed adapters through the Hyper-V switch. If so, what is the configuration/proper steps that you used to configure this. I have the server running Windows Server 2008 R2. Right now the server is in test mode, but my concern is that we won't see any issues until we move it into production and get some heavy traffic on the ports.

  Read the article

• Dedicated NIC or dedicated port for iSCSI?

  - by Newt

  When spec'ing and configuring a machine that will utilise shared iSCSI storage, I've read a lot of documentation which suggests a dedicated network adapter should be used for iSCSI communication. That makes a lot of sense and I have no problem with it. The question I do have, is this - should that suggestion be taken to mean that a separate physical NIC should be used, or will a dedicated port/ports on a dual/quad port NIC be just as good? My suspicion is that simply using dedicated port(s) on a shared NIC would be just as good. Any input greatly appreciated.

  Read the article

• NIC models for HVM guests in Xen 4.0

  - by Jed Daniels

  Is there a list of NIC models that I should use with various HVM guests in Xen 4.0? Is there even a list of possible choices for the model=field? I'm planning on running both Windows and FreeBSD guests on the particular Xen box that I'm configuring now, and ideally I'd like a setting that can work on both of them and get me gigabit speeds without a lot of extra hassle loading special drivers (similar to VMware's e1000 NIC option). Any suggestions? The vif line I'm currently using in my config is: vif = [ 'type=ioemu,bridge=eth0,model=ne2k_pci,script=vif-ovs' ] This works in my Windows XP SP3 VM, but is only recognized as a 10Mbit interface. Changing to model=e1000 or model=i82557b resulted in Windows not being able to find a driver for the NIC.

  Read the article

• NIC disabled in AWS instance

  - by Elad Lachmi

  Nothing makes you feel dumber than disabling a NIC while in RDP, but here I am :) I have mounted the volume on another instance and tried editing the registry. I have tried enabling auto logon and using runonce to run a netsh command to enable the NIC, but that does not work. I read something about enabling the NIC through the registry directly, but have had no luck in doing this. Has anyone dealt with this type of issue? I'm going nuts! Thank you!

  Read the article

• Bridged NIC's but only one active

  - by rockinthesixstring

  I've "Bridged" the NIC's in my Server 2003 box but when I do a large file transfer, I see that only one is active at a time. What do I need to do to spread the love across both NIC's? I'm hoping to increase transfer speeds from my Server to my network. PS: I have a D-Link DGS-1016D Switch.

  Read the article

• win32, multiple nic, different dns per nic, how gethostbyname() behaves ?

  - by dweeves

  Hello SF, On a win32 multiple nic computer, how to force DNS resolving through gethostbyname() on a specific nic if all nics have different DNS configured and have the same metric ? Otherwise, how to know which DNS will be used to resolve names each time a gethostbyname() call will be performed by the application ?

  Read the article

• Multiple virtual VLAN interfaces on single NIC (Debian)

  - by RayQuang

  I'm trying to setup multiple virtual interfaces with VLAN's on a single NIC. I'm running Debian Squeeze. Currently this is my /etc/netowrk/interfaces auto eth0.10 iface eth0.10 inet dhcp This gives me a working connection, however I'm not sure how to configure several like these on a single NIC so I can use multiple external IP's. I have tried aliasing the VLAN's like so: iface eth0.10:1 But that was not successful and it said failed to bring up interface. And suggestions would be greatly appreciated :)

  Read the article

• IBM HS23 Blade Server (7875) onboard NIC driver for linux

  - by Igor Spivak

  I work with IBM HS23 Blade Server (7875). It's onboard NIC adapter is: Emulex OCl11104-F-X Virtual Fabric Adapter 2-port 10GB and 2-port 1GB LOM . I'm tryed to the following Linux OS with the server: 2.6.32-22-generic-pae #36-Ubuntu SMP. and discovered my OS has not proper Network drive installed (for the NIC adapter described above). After investigation I made, I discovered that the driver I need is "be2net" placed in "net" directory of the linux under the folder "be2net". I managed to download this driver with the latest package for my kernel. Driver info ("modinfo be2net" result) is as follows: --------------------------------------------------------------------------------------- filename: /lib/modules/2.6.32-22-generic-pae/kernel/drivers/net/benet/be2net.ko license: GPL author: ServerEngines Corporation description: ServerEngines BladeEngine2 10Gbps NICDriver 2.101.205 version: 2.101.205 srcversion: 199ADD251CB874C3727CC47 alias: pci:v000019A2d00000710sv*sd*bc*sc*i* alias: pci:v000019A2d00000701sv*sd*bc*sc*i* alias: pci:v000019A2d00000700sv*sd*bc*sc*i* alias: pci:v000019A2d00000221sv*sd*bc*sc*i* alias: pci:v000019A2d00000211sv*sd*bc*sc*i* depends: vermagic: 2.6.32-22-generic-pae SMP mod_unload modversions 586TSC parm: rx_frag_size:Size of a fragment that holds rcvd data. (uint) --------------------------------------------------------------------------------------- After starting linux, I get the following error: be2net 0000:16:00.x: Emulex OneConnect 10Gbps NIC (be3) initilization failed. I checked the same server with another Linux version (Red-Had 5.5.1.0) and the NICs worked properly, so seems there is no problem in HW. Also, on IBM or Emulex offical sites I managed to find drivers only for Red-Had and SUSE versions.

  Read the article

• Use one NIC to create multiple interfaces for Linux KVM

  - by Phanto

  I am working on a thesis research project, and I am having some difficulty figuring out how to make one NIC spawn several "bridge" interfaces such that each KVM VM can be seen on the local network. I am very new to KVM, and am still exploring what it can do. Below is the scenario that I am attempting to make (on a CentOS/RHEL 6 system): Linux KVM Host has 1 NIC (eth0) connected to a switch. Create multiple "bridge" or equivalent interfaces that are spawned off of eth0 that would provide a unique IP for each VM. This is so that each VM can communicate with other hosts on the network, and that other hosts on the network can communicate with the VM. IMPORTANT: I would like iptables on the KVM host to be able to manipulate/control/restrict the traffic that would be sent on those "bridge" interfaces. I would like to create a minimum of three VM's, each using their own unique "bridge" interfaces. I have previously made a br0 interface off of eth0, but unfortunately, I am unable to add any more to it. It appears that you can only bridge 1 interface to the NIC. I would like to bridge many to one. Would a tap device be able to do this? If so, how would it be set up? Effectively, I am attempting to replicate what can easily be created with VirtualBox on Windows, where each VM is given a "bridged" interface, and can live on the network. I want to achieve this very same thing with Linux KVM. Thank You EDIT: To be more descriptive, I want to achieve something that looks like this: This can be found on this page: http://en.gentoo-wiki.com/wiki/KVM#Networking_2 HOST +---------------+ | | KVM GUEST1 | | +--------------+ | +------+ | | | LAN ---+--- eth0 | +--+---+---- nic0 | KVM GUEST2 | | tap0----+ | |192.168.1.13 | +--------------+ | | tap1----+ | +--------------+ | | | +------+ | | | | | br0 +--+----------------------+---- nic0 | |192.168.1.12 | |192.168.1.14 | +---------------+ +--------------+

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >