Search Results

Search found 17429 results on 698 pages for 'previous installation'.

Page 3/698 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Installation taking a very long time, hangs at "Configuring bcmwl-kernel-source"

  - by user290522

  I am installing Ubuntu 14.04(32-bit) on my laptop (Compaq Presario V2000), and after about 7 hours, it is still in Configuring bcmwl-kernel-source (i386) mode. The messages I read are as follows: ubuntu kernel: [22814.858163] ACPI: \_SB_.PCI0.LPC0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported with the numbers in the square brackets increasing. I have had Windows XP professional on this laptop, and I am erasing it. I am not sure if I should turn off the laptop, and start all over again. About 4 years ago I installed Ubuntu on this laptop, and that was very fast. The only problem I encountered was my wireless, and could not make it to work, and switched back to Windows. I appreciate any comments regarding this installation taking such a long time. After 40 hours the installation was still in configuring mode with the following messages: ubuntu CRON[29329]: (root) CMD ( cd/ && run-part .. report /etc/cron-hourly) I did the following to check for errors: pressed ctrl-alt-f2. This time the system froze. I had no other choice but to turn off the laptop, and start all over again. The exact model of the laptop is "Compaq Presario V2069CL Notebook PC" with AMD processor.

  Read the article

• Freezes when finishing installation of ubuntu 12.10

  - by Leon

  I wanted to install Ubuntu next to my Windows 7 and made a 100GB partition for that. After that I downloaded the Image for burning the installation cd. As soon as I started to boot from that DVD, my computer made some crackling noises and then froze completely. I had to press the power button in order to shut it down. After that I decided to download the Installer Version for Windows and startet installing it on the E:\ partition named Ubuntu. So far so good, the installer finished and told me to restart my computer. I did that and Ubuntu wanted to finish the installation. As soon as that started, the computer made some crackling noises again and froze completely. Then I tried the Safe Graphics option, or whatever it is called, and it froze again. I would really like to have Ubuntu installed on my system, because I like it. My computer components are the following: Mainboard: Gigabyte X58-USB3 Processor: Intel Core i7 960 RAM: 8GB 2000Mhz Graphicscard: NVidia Geforce GTX 570 HDD: 1 TB 7200rpm with 3 partitions(100GB W7, 100GB Ubuntu, 800GB Data)

  Read the article

• ubuntu 12.10 installation failure

  - by Eidelmaim

  Here i am asking this question again because someone deemed it a duplicate to another topic which i over looked and NOTHING AT ALL in that topic pertained to my problem. If your going to close a topic believing it is a duplicate at least do somke reasearch into WHY you think its a duplicate and provide a like to a better source. How do i get past this installation username and password issue? I downloaded ubuntu 12.10 directly from Ubuntu.com and created a bootable USB with linuxlive. after loading the boot drive and ubuntu begins, it goes directly from the purple ubuntu startup screen directly to a black DOS like prompt asking for a ubuntu login. this is COMPLETLY before any installation -begins. i need some help with this. FYI : this is what it is saying after it goes to the login area in the DOS (Full black screen) like screen. Ubuntu 12.10 ubuntu tty1 ubuntu login: now i will provide a few images of the problem i am having. and because i DONT HAVE ANY OS on the computer BECAUSE ubuntu WONT go PAST this... i have to snap these pictuires with a cell phone and upload on another PC. these links are in chronological order from time of pressing power button to time i am presented with log in screen : image 1 image 2 can only post 2 links in messages... will post additional links in comments So, again... how do i get past this ? this is entireley before ubuntu is installed on my system. my PC specs... Homebuilt computer: Motherboard is a Asus Sabertooth x58 with a intel core i7 processor. Mushkin memory @ 12gbs. 4ea. Seagate 150gb hard drives. nvidia GTX 260 graphics card. i initially attempted to install to raid 5. failed. i broke down the raid and attempted to install to a single drive with all other drives disconnected from the PC. again, thanks in advanced for any assistance.

  Read the article

• Doesn't boot after installation

  - by jchysk

  Downloaded Ubuntu 12.04.1-alternate-amd64 Installed to USB stick Integrity check fails on ./install/netboot/ubuntu-installer/amd64/pxelinux.cfg/default but that seems to be a known bug where the file isn't included in the alternative 64-bit ISO and shouldn't affect installation. I ignore it and proceed on. For partitioning on 2 SSD Drives: Partition 300MB and 63GB on both RAID1 the 300MB and 63GBs Set the 300MB to EXT4 on /boot Encrypt the rest as MD1 and set it for LVM Create two volumes from MD1: 4GB swap and 59GB to / I go through the installation and get to the point where it says everything is ready and to take the media out so as to boot from the drives I receive the error "Error: No video mode activated." on startup I've read that this can be solved by running "cp /usr/share/grub/*.pf2 /boot/grub" and then updating grub but I can't get to a place where I can actually run this command. In rescue mode I can get to a shell from installer with /boot mounted to /target. So from there I can run "cp /cdrom/boot/grub/font.pf2 /target/grub/" but can't figure out a way to get it to update grub after that or know how what to change in manually updating the grub.cfg file. If I try other devices to mount the root filesystem I get the error "An error occurred while mounting the device you entered for your root file system". It just sits on the video mode error and doesn't progress further. Googling around it seems like people see the error briefly before it continues booting, not getting stuck on it the way I am which leads me to believe that error may be unrelated to Ubuntu not booting. So any ideas as to what I should try next or what needs to be done to install Ubuntu and get it to boot would be helpful.

  Read the article

• Installation from Usb

  - by supreet

  Want to install ubuntu from usb flash but after i press continue after the install alongside windows button my HP pavillion laptop restarts and boots into vista and starts wubi installer. The wubi installer installation process ends with the following error. 'None Type' object has no attribute 'get_info' A portion of log file is as follows 12-01 06:15 DEBUG downloader: download finished (read 198 bytes) 12-01 06:15 INFO saplog: Verified a signature from ID:'46181433FBB75451'. 12-01 06:15 INFO saplog: Checking block bindings.. 12-01 06:15 INFO saplog: Key verified successfully. 12-01 06:15 DEBUG CommonBackend: metalink md5sums: 1fdde0057923dc6c4bd69b657480a631 *ubuntu-12.10-beta2-desktop-amd64+mac.metalink 091d4adafcfe4eea08eb41771be3f3ba *ubuntu-12.10-beta2-desktop-amd64.metalink 940ab0bf82879435181f8c03304e7387 *ubuntu-12.10-beta2-desktop-armhf+omap4.metalink 9e0ad0a15414df437a27c66da938d3e3 *ubuntu-12.10-beta2-desktop-i386.metalink 4672b67404c84ba74bf104607bbec49a *ubuntu-12.10-beta2-server-amd64+mac.metalink a8d35d8579f11579e802667bbcb7b0fb *ubuntu-12.10-beta2-server-amd64.metalink fb6219893d9f4f329183fafaac258681 *ubuntu-12.10-beta2-server-armhf+omap4.metalink 12fbf5ccf3aedfd8fe31f1ab00ec8ddb *ubuntu-12.10-beta2-server-i386.metalink e1a7672decc21eb6a65464b0a239a1db *ubuntu-12.10-desktop-amd64+mac.metalink 894437367bf791cf02902d6f5285af98 *ubuntu-12.10-desktop-amd64.metalink 57a58f151b50e218acc4724388d2f387 *ubuntu-12.10-desktop-armhf+omap4.metalink 11e206f0d5e147fe05b9e85d78f5f187 *ubuntu-12.10-desktop-i386.metalink fc37a124ca1957d7549a296d59e3dd81 *ubuntu-12.10-server-amd64+mac.metalink 35afee005d732a9ad0361b4aae25e3c3 *ubuntu-12.10-server-amd64.metalink 68adfc9d71d5b3613a09c3e6c45f8ba5 *ubuntu-12.10-server-armhf+omap4.metalink c4fd126394cf2e1bbd626b5f74b3e40b *ubuntu-12.10-server-i386.metalink 12-01 06:15 ERROR CommonBackend: The md5 of the metalink does match 12-01 06:15 ERROR CommonBackend: Cannot authenticate the metalink file, it might be corrupt None 12-01 06:15 DEBUG TaskList: #### Finished get_metalink 12-01 06:15 DEBUG TaskList: New task get_file_md5 12-01 06:15 DEBUG TaskList: #### Running get_file_md5... 12-01 06:17 DEBUG TaskList: #### Finished get_file_md5 12-01 06:17 ERROR CommonBackend: Invalid md5 for ISO D:\ubuntu\install\installation.iso (b4191c1d1d6fdf358c154f8bf86b97dd != 7e15759e5716c9bc662cd3efa5514cef) None 12-01 06:17 DEBUG TaskList: ### Finished check_iso 12-01 06:17 ERROR TaskList: 'NoneType' object has no attribute 'get_info' Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in call File "\lib\wubi\backends\common\backend.py", line 595, in get_iso File "\lib\wubi\backends\common\backend.py", line 564, in use_cd AttributeError: 'NoneType' object has no attribute 'get_info' 12-01 06:17 DEBUG TaskList: # Cancelling tasklist 12-01 06:17 DEBUG TaskList: # Finished tasklist 12-01 06:17 ERROR root: 'NoneType' object has no attribute 'get_info' Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in call File "\lib\wubi\backends\common\backend.py", line 595, in get_iso File "\lib\wubi\backends\common\backend.py", line 564, in use_cd AttributeError: 'NoneType' object has no attribute 'get_info' Please help.

  Read the article

• Debootstrap chroot Installation Error

  - by frogstarr78

  During initial installation of Ubuntu Server 12.04.1 LTS (64-bit) as a guest VM on XenServer 6.1 I'm getting this error: Debootstrap warning Warning: Failure trying to run: chroot /target dpkg --force-depends --install /var/cache/apt/archives/debconf_1.5.42ubuntu1_all.deb Any ideas? Just tried the same ISO on VirtualBox and it errored in the same way, although on different packages: base_files_6.5ubuntu6.2_amd64.deb and base-passwd_3.5.24_amd64.deb I'm redownloading and trying another ISO.

  Read the article

• error during installation

  - by ratnesh

  at the time of installation ubuntu 10.04.4 from iso inside windows 7 in hp laptop i got this error so plz tell me how can an error occurred:is error executing command command=c:\windows\system32\bcdedit.exe/set {77cbb5c5-2fbf-11e0-820a-f8b4fbbabc97}device partition=f: retval=1 stderr=An error has occurred setting the element data. the request is not supported. stdout=

  Read the article

• Cannot get past "Installation type" screen after choosing "Install Ubuntu inside Windows 7"

  - by Greg

  After getting to the screen that states: "This computer currently has Windows 7 on it. What would you like to do?" I am not able to continue with the installation process after selecting "Install Ubuntu inside Windows 7". I am running Ubuntu off a USB drive after using UNetBootin and then selecting the "Install Ubuntu 12.04 LTS" shortcut. Everything included on the online guides worked perfectly up to this point. Very new to Linux, please help?

  Read the article

• Ubuntu 64-bit 12.04 installation dvd boot problem blank screen

  - by user877329

  I get blank screen when trying to install UbuntuStudio 64-bit DVD (i tried to install from DVD not USB stick). When using nosplash and no quiet i see that it hangs when it tries to load the nouveau driver for my GeForce GT 630 so it looks like there is a problem with support for my graphics card. After installation, I tried to install the binary nvidia current driver from package manager, but then, i just get a text terminal after rebooting. Any solution?

  Read the article

• VMWare ESXi 4.1- 5.1 installation hang

  - by osij2is

  I'm well aware that I'm trying to install VMWare ESXi 5.1 on hardware that's not on the HCL. I can't find my motherboard on the ultimatewhitebox site as well. I acknowledge these issues in advance. What I'm trying to find is someway to access the logs during installation or see a console or log file to see where the installation is hanging at and remove a device or change a setting in the BIOS. The installation is hanging, not getting a purple screen of death. I thought by hitting ALT+F10 or F12 (or some key combination as such) would enable me to see the console but no such luck. I haven't been able to find much within the ESXi online documentation either. Here's the parts I'm using: AMD Phenom II x3 700 MSI 890FXA-GD70 (IOMMU capable) 16GB DDR3 1333 RAM (2x8GB DIMMs) Intel Pro 1000 (Dual-GbE) PCIe x4 (removed during installation) LSI 9211-8i PCIe (removed during installation) LSI 9201-16i PCIe (removed during installation) Matrox video card BIOS settings: IOMMU is enabled (during 5.1 IOMMU successfully loads) AHCI is enabled (hangs for 4.1) Both onboard Realtek NICs are disabled For ESXi 5.1, the installation hangs after vmkapi_v2_0_0_0 is loaded. For ESXi 5.0, it hangs when loading the vmklinux_9 module. For ESXi 4.1 U3, the installation hangs during loading of ahci module. Again, I'm looking for some way to view a console (service console?) or log file during or after an installation attempt to see what verbose error messages or logging can lead me to solving this problem.

  Read the article

• How to partition USB drive for Ubuntu installation?

  - by Heather

  I am not a computer savvy and need to know how to partition my USB drive without messing up my laptop. I already have the boot order set up properly and the USB drive already has the ISO image downloaded onto it. I am ready for install but just do not know how to partition. I am installing Ubuntu 12.4 LTS onto a USB. Can someone help me? I need an easy walk through please. What I need to know is from the screen shots above do I use the swap drive and if so how do i partition that drive to be my drive? I am stuck up to this part on the installation process. Yes please make a list of the steps for me.

  Read the article

• A glitch after Ubuntu Installation. Cannot boot Ubuntu

  - by Starx

  I am trying to create a dual boot of Ubuntu 10.10 with Windows 7. My hard disk allocation were as follows: Windows 7 NTFS 100 GB /boot EXT4 200 MB SWAP LINUX SWAP 4 GB / EXT4 46 GB After installation is complete, instead of getting the boot screen of Ubuntu, it directly boots from windows 7 without asking anything. What is wrong? I run the Live Cd again using USB drive and I see that the \boot, and \ are occupied with most likely Ubuntu data. Now How do i point my Laptop to point to Ubuntu Boot instead of Windows Boot

  Read the article

• FGLRX installation without main monitor

  - by Chris

  This is a spiritual follow up to this I am doing some modern OpenGL tutorials and I have found that MESA does not support openGL 3.0+, so I need to get back to FGLRX even if its given me grief in the past. Every time I have tried to install FGLRX drivers I generally get thrown to the terminal and have to do some recovery, etc. before I can get them to work. Problem is, now that my main monitor is borked, when I install FGLRX drivers I cannot boot to terminal. Question: How do I back up my current windowing so that when I (inevitably) lost my boot due to FGLRX installation, I can recover it with a livecd without reinstalling, and how can I install it without a main monitor?

  Read the article

• problem in eclipse installation in Ubuntu 12.04

  - by Srijan

  Have tried more than dozen times to install Eclipse version available in the Ubuntu Software Center still to no avail. Every time I try to install it shows error i.e. unable to install. Have tried to install it using terminal as well with still the same results. After installation it refuses to run. What to do or any other packages I can use instead of Eclipse. Mainly trying to run java programs through eclipse. Thanks for the time. Am using Ubuntu 12.04 on x86-64 bit architecture.

  Read the article

• font showing up as squares during installation

  - by EmileBeaulieu

  I am very new to linux, just so you know. I chose ubuntu as my first linux distro. I created a boot flash drive and installed it on to my little netbook. It works fine, and I'm having fun playing around with it. Now I wanted to install it on my main computer, however after inserting the flash drive and rebooting, and after the initial startup screen, the first screen that comes up has ALL the text showing up as little squares! If I remember correctly from when I installed it on the netbook, it's asking me what language I want on this screen. Why would this happen on my main computer and not on the little netbook, when I used the exact same flash drive and installation? I have a screenshot, but since I'm new here, it won't let me post it.

  Read the article

• Computer Boot/Installation Failure

  - by Marcus

  I recently tried to insatll Kubuntu and it failed. It completely removed everything off of my HDD and there is no operating system. Everytime I try to install a Distro it fails during instillation. I got Ubuntu 13.04 to work but it required a reboot and after that it did not work. I tried to re-install Ubuntu but it failed. I have tried Ubuntu, Kubuntu, and Xubuntu and they all failed. With Kubuntu and Xubuntu I get an error saying, "The 'grub-efi-amd64-signed' package failed to install into /target/. Without the GRUB boot loader, the installed system will not boot". When I select try (distro) it loads up but the installation won't finish. I do not want to have to try the distro everytime I want to get on it. Any help?

  Read the article

• fglrx installation without success

  - by Lucio

  I followed the steps of this guide and it doesn't work. I've entered the following command and I had an output with dependencies error. sudo dpkg -i fglrx*.deb So I tried with gdebi instead, and it works. Now fglrx & fglrx-amdcccle & fglrx-dev are installed. The next step is Generate a new /etc/X11/xorg.conf file, but I can't do this due to the following reason: When I enter sudo aticonfig --initial -f the terminal show me this output: sudo: aticonfig: command not found I've installed the packages correctly or not? What I have to do to fix the problem? NOTE: I've not uninstalled nothing (drivers, config., etc.) before beginning the installation.

  Read the article

• ubuntu desktop installation problem, a lot of error messages

  - by veerendar

  Hi I am getting error messages while trying to install ubuntu 12.04 on my desktop(intel pentium D). and the error messages are: *checking battery state... [412.633532] end_request:I/O error .dev sr0, sector 1291684 [435.997503] SQUASHFS error: squashfs_readdata failed to readbloack 0x275fcda4 [435.9975xx] SQUASHFS error: unable to read fragment cache entry page [275fcda4] . . [524.000055] exception Emask 0x0 SAct 0x0SErr 0x0 action 0x6 frozen ata5.00 : cmd a0/00:00:00:08:00/00:00:00/00 tag0 pio 16392 in res 58 /00:02:00:08:00/00/a0 Emask 0xf(timeout) [524.000292] ata5.00 status : {DRDY DRQ} I was able to install on another pc(intel atom) but not on this pc(intel pentium D), Can any one help me in successful installation. Thanks!

  Read the article

• ubuntu server 12.04 new installation does not boot

  - by itsols

  I've just installed server 12.04 on a new machine. It's got two network cards and two hard drives. During installation it asked me if I wanted to make it RAID and I said ok to that. Finally, it came to the packages options and I chose things like Samba, LAMP, etc. And then it asked to reboot without the CD. Did that and that's where the problem started. Nothing comes on the screen. Only a blinking cursor. Has anyone experienced this problem? I'm guessing that it may be a RAID issue. Not sure. Any thoughts please...

  Read the article

• Installation taking a very long time

  - by user290522

  I am installing Ubuntu 14.04(32-bit) on my laptop (Compaq Presario V2000), and after about 7 hours, it is still in Congiguring bcmwl-kernel-source (i386) mode. The messages I read are as follows: ubuntu kernel: [22814.858163] ACPI: \_SB_.PCI0.LPC0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported with the numbers in the square brackets increasing. I have had Windows XP professional on this laptop, and I am erasing it. I am not sure if I should turn off the laptop, and start all over again. About 4 years ago I installed Ubuntu on this laptop, and that was very fast. The only problem I encountered was my wireless, and could not make it to work, and switched back to Windows. I appreciate any comments regarding this installation taking such a long time.

  Read the article

• how to install a pbc library with fink installation,what is meant by fink installation

  - by user2910238

  jec@jec:~/cpabe/libpbc$ ./configure bash: ./configure: No such file or directory jec@jec:~/cpabe/libpbc$ ls announce COPYING gen include misc release arith debian gmp-5.1.3 INSTALL NEWS setup AUTHORS doc gmp-5.1.3.tar.bz2.sig licence.odt param simple.make benchmark ecc gpl-3.0.odt makedeb.sh pbc test configure.ac example guru Makefile.am README jec@jec:~/cpabe/libpbc$ ./configure.ac bash: ./configure.ac: Permission denied

  Read the article

• A rather long question about installation/uninstall

  - by user2364312

  Ok so here's the deal guys, last week I decided I want to install Ubunutu again because I really missed it. (Last time I had an ubunutu was 7.somehting) I downloaded 12.04 and isntalled it via bootable usb device. Knowing how dual boots works I cleared up some space on my hard disc before hand using the windows 7 built in disc manager. During Ubunutu's installation I thought that by choosing "Install Ubuntu alongside Windows 7" will automatically just use the space I cleared before, but apperentaly it did not since that partition is still 100% free space. On what partition is Ubunutu installed when using that method? And how can I uninstall it to re-install it back on the space I cleared up for it? Thank you very your time reading and helping!

  Read the article

• Lubuntu 12.04 installation trouble

  - by Evaggelos Tsampazis

  I have i problem! I can't install the Lubuntu 12.04 on my old pc. I only get to the point where I have entered all the needed information (hard drive, username, password etc). When the installation wizard is starting to copy files from the cd to the hard drive, I get after about one minute a blank sreen with only themouse cursor! I can move the mouse cursor but the whole procegure is stoped! Nothing happens after that! My PC: Compaq Pressario 7000 Pentium III 933 MHz 768 MB RAM Any idea how to solve it?? Thanks!!!

  Read the article

• No "Choose OS" screen after co-installation of Ubuntu 12.04

  - by Léon McGregor

  I don't have any technical knowledge of Ubuntu but wanted to install it on a partition. Step-by-step of what i did. used disk management in windows 7 to clear 50gb of space used a usb live ubuntu 12.04 installer in custom install mode used the installer's built in disk manager to set up 2gb swap space and 48gb ext4 space ran installation, with option to copy over documents and settings from windows 7 restarted after completion. After this, my computer automatically loads ubuntu 12 and skips the option to load windows 7. i know the files are still there, as i can see them in the file manager. When trying to fix with the win7 installer dvd it tries to repair the OS in drive [D:] i.e. it recognises the disc itself as the OS and ignores the [c:] files. I think, after browsing around here, similar problems suggest this is a problem with the boot loader, but if the win7 dvd won't work, then i don't have any way to fix this. does anyone know of a way to force the computer to show a "choose OS" screen?

  Read the article

• Installation Problems & Antivirus

  - by Sagar Walvekar

  We have just migrated our systems from Windows to Ubuntu. We have more than 50 systems previously running Windows XP & Windows 7. After the release of 12.04 we decided to switch to Ubuntu. While we were installing Ubuntu 12.04 on Pentium 4 systems we have faced some issues. We tried it with a USB flash driver & CD. The typical configuration of the system is as follows: Pentium 4 with HT & 512 MB RAM, 40/80 GB IDE / SATA HDD. In windows there were several partitions and data on all the drives in all the systems. We have addressed this by taking backup of the C: drive on other drives & while installing Ubuntu we have just deleted & the C drive & recreated Linux partitions as follows - /root , /Boot, /Home & Swap.(in 10 GB) The problem is that the Linux gets installed without any error. However when I restart the system after the installation the system hangs in while detecting the HDD in BIOS and the system fails to start until I remove the HDD. When I installed the previous Ubuntu version it worked fine, without any hassle. Also if we install Ubuntu 12.04 on same HDD on any other higher capacity system & reconnected to old system it works fine. How can I fix this problem? Also, is there is any Antivirus which will give me real time protection on ubuntu 11 & higher versions with both 32 & 64 Bits?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >