Search Results

Search found 163 results on 7 pages for 'rfkill'.

Page 3/7 | < Previous Page | 1 2 3 4 5 6 7  | Next Page >

• How to use IBM T42 laptop's built-in Bluetooth?

  - by B. Roland

  Hello! I have an IBM ThinkPad T42 laptop, and I have some troubles with built-in bluetooth, because in Hardware Drivers, there are no drivers for it, and in Bluetooth settings, it shows, that it has no BT devices. If I plug in an USB Bluetooth adapter, I can use easily Wammu for my mobile backup. I have no setting in BIOS, to enable, or disable it(if disable wireless refers to Wi-fi, but it is enabled too). Some outputs, what the community asked from me, in the IRC: $ sudo hcitool dev Devices: $ $ cat /proc/acpi/ibm/bluetooth No file or dir $ $ sudo modprobe bluetooth $ $ rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ But they couldn't solve my problems. What can I do?

  Read the article

• Sony Vaio PCG-71315L "Wireless is disabled by hardware switch" Help!

  - by Luke Rossi

  I'm a new user to Ubuntu and Linux as a whole, I've had it for a few months and just as I'm starting to get a feel for things my wireless decided to quit on me. This puzzled me so i checked all the switches on the Vaio; my wireless switch was on (my bluetooth was also working), and in my windows partition the problem is non-existent. Help please? Anyways after executing the "rfkill list" command this was the outcome: 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no 2: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 4: hci0: Bluetooth Soft blocked: no Hard blocked: no As stated in the title my laptop is a Sony Vaio PCG-71315L

  Read the article

• Bluetooth driver not working in ubuntu 12.04 hp pavillion dv6 6155tx

  - by Arin Chakraborty

  In my Hp Pavillion dv6 6155-tx everything is working just fine except for the Bluetooth. I have pretty much tried every bluetooth software out there but none seems to work. It seems that the driver is not installed or something like that. When i search for new devices it just dont find any device and the vice versa. Please kindly help me ! I am frustrated for more than 4 months now searching for some answers. The output of rfkill list :- 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Bluetooth not detected on Asus X401A / Ubuntu 12.10

  - by Majster-pl

  I have Asus X401A ( according to specs bluetooth is build-in to this laptop, http://www.asus.com/Notebooks/Versatile_Performance/X401A/#specifications ) Bluetooth in global settings is gray ( unable to turn it on ) rfkill list output: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no cat /var/log/dmesg | grep Blue* [ 5.895791] Bluetooth: Core ver 2.16 [ 5.895807] Bluetooth: HCI device and connection manager initialized [ 5.895809] Bluetooth: HCI socket layer initialized [ 5.895810] Bluetooth: L2CAP socket layer initialized [ 5.895814] Bluetooth: SCO socket layer initialized [ 5.909618] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.909621] Bluetooth: BNEP filters: protocol multicast [ 5.910020] Bluetooth: RFCOMM TTY layer initialized [ 5.910024] Bluetooth: RFCOMM socket layer initialized [ 5.910025] Bluetooth: RFCOMM ver 1.11 hcitool dev Devices: (empty) My wifes laptop Asus K53 have the same problem Ubuntu 12.04 LTS Any help please ?

  Read the article

• Wifi disabled on dell Inspiron Mini 10 (1018)

  - by Manu

  My netbook cannot access the wifi network, and I cannot enable it. This is the second time this has happenned. The first time, it came back after a lot of restarts and BIOS factory resets. Ubuntu sometimes simply won't connect to any wifi networks, and other times it will say that the wireless is blocked by a hardware switch. I have tried pressing F2 and doing a BIOS reset, with no luck. sudo rfkill list all gives : 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• WiFi not working in Ubuntu 13.10 with Ralink RT3290

  - by Francisco

  I have upgraded from Ubuntu 13.04 to Ubuntu 13.10 and now my WiFi doesn't work. It takes a lot of time to connect but when connected, connection is quickly lost again. In Ubuntu 13.04 worked fine. Here are some outputs: lspci | grep Wireless 01:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod | grep rt2800 rt2800pci 18966 0 rt2800lib 95449 1 rt2800pci rt2x00pci 13287 1 rt2800pci rt2x00mmio 13661 1 rt2800pci rt2x00lib 56053 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio mac80211 634661 3 rt2x00lib,rt2x00pci,rt2800lib eeprom_93cx6 13344 1 rt2800pci crc_ccitt 12707 1 rt2800lib dmesg | grep rt2800 [ 19.959959] rt2800pci 0000:01:00.0: irq 46 for MSI/MSI-X modinfo rt2800pci | grep 3290 alias: pci:v00001814d00003290sv*sd*bc*sc*i*

  Read the article

• Wifi not working for Ubuntu 14.04

  - by user286975

  I have installed the Ubuntu 14.04 on Dell Vostro 2520 laptop. Wifi is not working after installation. Tried several methods to install but nothing happens. Vostro-2520:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no Vostro-2520:~$ iwconfig usb0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. The hardware is Broadcom 802.11 bcm43142. Please help to solve this issue.

  Read the article

• rc.local is not always executed upon boot

  - by starcorn

  Hey, I have some weird problem with the rc.local file which is located in /etc/rc.local the thing is that it is not always running when I boot up the laptop. Maybe every second time, I haven't counted. Anyway when that happens I have to manually go to terminal and type sudo /etc/init.d/rc.local start, which kinda kills the purpose of having this script. Anyone know what the problem could be? EDIT Since this wasn't obvious. This is an issue where I make a fresh boot up. Which mean I have shut down the computer. And next time when I boot up the computer, the rc.local file is randomly deciding whether it will automatically start or not. Here's a copy of what my rc.local file contains echo -n 255 > /sys/devices/platform/i8042/serio1/serio2/sensitivity echo level 2 > /proc/acpi/ibm/fan touch /home/starcorn/Desktop/foo rfkill block bluetooth exit 0

  Read the article

• How do I get wireless to work on a Dell Mini 1018 with Realtek RTL 8188CE Network Adapter?

  - by Laurence Nagel

  My Dell Mini 1018 used to work fine with Ubuntu 12.04 with no problems connecting with the wireless card. Then I made the big mistake of attempting to disable WiFi by right-clicking on the wireless applet and un-checking "Enable Wireless." Since then, I cannot get wireless working again. The wireless applet reports that "wireless is disabled by hardware switch" but there is no hardware switch on this computer. Issuing a rfkill list yields the following: 0: dell-wifi: Wireless LAN Soft blocked: yes Hard block: yes 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I'm in way over my head, and my computer is now useless. Help!!!

  Read the article

• Ubuntu 12.10, Wireless not working

  - by Karthik

  My Laptop is Acer 5742G with "Npilfy 802.11 wireless". I have both windows 7 and Ubuntu 12.10 Earlier when I had Ubuntu 12.04, the wireless was working fine, but after installing 12.10 wireless is not working at all, although it is still working in windows. I am not able to see "Wireless Networks" in the Network Manager nor in the Network Settings. This was the output I got for rfkill 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no This is a snapshot of my Additional Drivers settings. As you can see, the required driver for wireless is installed.

  Read the article

• Bluetooth not really "turning on" on a Sony Vaio VPCEG

  - by marcioAlmada

  On a Sony Vaio VPCEG, bluetooth is not working properly: The gnome-shell bluetooth indicator (at the main bar) shows the bluetooth is on, but when I try to switch visibility on it simply doesn't turn on. When I open the bluetooth configuration dialog, the on/off indicator shows me the bluetooth is off. And when I try to turn it on it simply does not turn on. The following is outputted by lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0c45:64be Microdia Bus 001 Device 004: ID 0489:e027 Foxconn / Hon Hai Bus 002 Device 014: ID 4971:ce22 SimpleTech ====== Update: Output from rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: sony-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no What should I do to really activate the bluetooth?

  Read the article

• Asus X552VL WI-FI Problem

  - by Mitkobg

  I have a problem with my Wireless on my laptop. When i did rfkill list: 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 4: hci0: Bluetooth Soft blocked: no Hard blocked: no 5: phy1: Wireless LAN Soft blocked: no Hard blocked: yes itko@Mitko:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off mitko@Mitko:~$ lspci -nnk | grep -A2 0280 03:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: AzureWave Device [1a3b:2c97] Kernel driver in use: ath9k mitko@Mitko:~$ lsmod | grep -e ath9k -e asus asus_nb_wmi 16990 0 asus_wmi 24191 1 asus_nb_wmi sparse_keymap 13948 1 asus_wmi ath9k 164164 0 ath9k_common 13551 1 ath9k ath9k_hw 453856 2 ath9k_common,ath9k ath 28698 3 ath9k_common,ath9k,ath9k_hw mac80211 626557 1 ath9k cfg80211 484040 4 wl,ath,ath9k,mac80211 wmi 19177 3 mxm_wmi,nouveau,asus_wmi video 19476 3 i915,nouveau,asus_wmi

  Read the article

• Intel Centrino Wireless-N 1000 Again ! Ubuntu 13.04 x64

  - by vafa

  First I have to say that I tried everything written about this concept. The problem is that it stops working randomly in 3 main forms : 1 - sometimes it disconnect from wireless network and reconnect automatically 2 - sometimes it disconnect and wont connect no matter what (needs reboot) 3 - some times it's still connected but cannot ping or surf or whatever. I already tried disabling N mod using these commands : sudo modprobe -r iwlwifi modprobe iwlwifi 11n_disable=1 (or 0, whatever) it didn't help . these are the results of lspci, sudo lshw -C network, ifconfig, iwconfig, rfkill list when it disconnected and didn't connect till reboot : ifconfig : eth0 Link encap:Ethernet HWaddr c8:0a:a9:34:65:77 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1563213476557380 errors:9379306629148050 dropped:3126435543049350 overruns:1563217771524675 frame:7816088857623375 TX packets:1563217771524675 errors:6252871086098700 dropped:0 overruns:1563217771524675 carrier:3126435543049350 collisions:7816088857623375 txqueuelen:1000 RX bytes:1563217771524675 (1.5 PB) TX bytes:1563217771524675 (1.5 PB) ham0 Link encap:Ethernet HWaddr 7a:79:19:a5:e4:93 inet addr:25.165.228.147 Bcast:25.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:19ff:fea5:e493/64 Scope:Link inet6 addr: 2620:9b::19a5:e493/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:7743 errors:0 dropped:0 overruns:0 frame:0 TX packets:1250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:665642 (665.6 KB) TX bytes:204056 (204.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:41138 errors:0 dropped:0 overruns:0 frame:0 TX packets:41138 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6420962 (6.4 MB) TX bytes:6420962 (6.4 MB) wlan0 Link encap:Ethernet HWaddr 00:1e:64:45:fb:70 inet6 addr: fe80::21e:64ff:fe45:fb70/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:286999 errors:0 dropped:0 overruns:0 frame:0 TX packets:226966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:324386887 (324.3 MB) TX bytes:30674804 (30.6 MB) iwconfig : ham0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off sudo lshw -C network: *-network description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:45:fb:70 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-30-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:46 memory:c0400000-c0401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: c0 serial: c8:0a:a9:34:65:77 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:c0900000-c093ffff ioport:5000(size=128) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:19:a5:e4:93 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full ip=25.165.228.147 link=yes multicast=yes port=twisted pair speed=10Mbit/s lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 105M] (rev a1) 07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] 09:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0) rfkill list : 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 9: phy0: Wireless LAN Soft blocked: no Hard blocked: no any help will be REALLLYYYY appreciated

  Read the article

• No Wireless In Ubuntu 13.10 (maybe Need Wireless Driver) [duplicate]

  - by viktorhubinette

  This question already has an answer here: No Wireless In Ubuntu 13.10 2 answers hi after updating to ubuntu 13.10 i cant see the wireless networks on the network meny so what should i do ? tell me some commands you need to see to solve the problem. Thanks (i maybe need a wireless driver becouse i installed one when i haved 12.04 becouse i could not connect to wireless before too) i cant connect to wireless that my problem so what do i need to do to get this wireless working again? some outputs lsmod | grep rt1 nothing sudo modprobe rt18192cu FATAL: Module rt18192cu not found. iwconfig eth0 no wireless extensions. lo no wireless extensions. sudo iwlist wlan0 scan wlan0 Interface doesn't support scanning. rfkill list all nothing

  Read the article

• Wireless not working with an Atheros AR9285

  - by Neeraj

  I recently installed Ubuntu 12.04 and found my wireless card is not detected by OS. I tired to detect it by network manager but still it is not get output of the required command: toor@Linux:~$ sudo lshw -class network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:9e:22:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=124.123.227.84 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:44 memory:f2400000-f243ffff ioport:2000(size=128) *-network UNCLAIMED description: Network controller product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f2500000-f250ffff and toor@Linux:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no Please let me know what more info is required to resolve it.

  Read the article

• Wireless does not work anymore after software update with Ubuntu 12.10 on a Dell Latitude E6230

  - by Andy

  I just installed Ubuntu 12.10 on my DELL Latitude E6230, on first boot wifi worked properly but when I updated the software it stopped working. I can't figure out the problem... The wireless network controller is a Broadcom Corporation BCM4313 802.11b/g/n Wireless Lan Controller (rev 01) "lshw -class network" gives, for the above controller: *-network UNCLAIMED description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7d00000-f7d03fff After reading the answer to another similar question, I edited the file NetworkManager.conf to make "managed=true", but that did not make any difference, it is as if the wireless adapter were not there. In the "Network" setting window, I only see "Wired" and "Network proxy". Wireless has just disappeared: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no and that's it! Nothing about the wireless controller... Any suggestions?

  Read the article

• Dell wireless not working after upgrade

  - by Omer Saeed

  So, the short version of my sad story is that I tried upgrade Ubuntu to 12.04 and wireless driver has stopped working. I have tried all the solutions but nothing seem to be working. When I try to install my wireless from "Additional Drivers" Its says: Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log The lspci command gives me the following info about wireless: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) I have tried removing bcm drivers and reinstalling, but nothing seems to be working. rfkill is good too.

  Read the article

• Wifi networks will not show up!

  - by Kcahmadi

  I'm running Ubuntu 14.04 on an old '08 macbook. I've gone to system settingsSoftware & UpdatesAdditional Drivers and enabled the wireless driver. But when I click the wifi icon on the top toolbar no networks show up. When running lshw it clearly shows my wireless card under Network controller and it says the driver is installed. However, nm-tool only shows ethernet. And rfkill only shows bluetooth. What can I do?

  Read the article

• Toshiba satellite L500 no Wifi anymore!

  - by Benjamin Piller

  I have a Toshiba Satellite L500 with Ubuntu 12.04 and its wifi suddenly stopped working!! I've never seen like that before.. I tried also using external USB wifis but no success. I am not able to turn it on with the function keys nor using rfkill commands and similar WLAN manipulator Commands in the terminal! It was working before for at least 4-5 months!! The computer says it's turned off by hardware. I checked it and the Driver is fine. So why can i not use any Wifi on my computer?? Why it is suddenly disabled? I checked the BIOS too there is enabled the WLAN. I spent 10 hours for searching for solutions but i am out of ideas!!! Please Help!

  Read the article

• WIFI card intel r 2200 will not work

  - by Telemarkhero

  I have installed 12.04 on a Fujitsu Siemens Amilo Pro. Wifi card does not work. Have tried various threads but none have the same problem. Think I have the correct firmware but the following comes up: gill@ubuntu:~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11bg ESSID:off/any Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power=off Sensitivity=8/0 Retry limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. Also gill@ubuntu:~$ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes There is a power switch for wifi but it does not do anything in Ubuntu. Any pointers greatfully received.

  Read the article

• Why has wireless disappeared after my 12.10 upgrade?

  - by Shay Guy

  I just upgraded to 12.10 on my Lenovo B570 laptop. NetworkManager isn't displaying a submenu for wireless connections at all, even though I downloaded the update through the wireless connection. This displeases me. Stuff I've tried includes: $ sudo modprobe wl FATAL: Module wl not found. $ sudo lspci -nn | grep "BCM" 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) $ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no ETA: linux-headers-generic is already the newest version, and what I get when reinstalling bcmwl-kernel-source includes the following, near the end. DKMS: install completed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found.

  Read the article

• Cannot get Atheros AR9285 to work on 12.10

  - by user100449

  I've already went through all possible advices and still cannot start my Atheros AR9285 wireless card. I have a laptop Toshiba Portege Z830 where the WiFi already worked under Windows 7. But after migration on Ubuntu 12.10. I'm not able get it work. This is what I see on command lshw *-network UNCLAIMED description: Network controller product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:c0500000-c050ffff This is what I see on command rfkill list 0: Toshiba Bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: yes Hard blocked: no Any idea?

  Read the article

• Macbook Pro late 2011 screen brightness issue

  - by buchzumlesen

  The keys to set the screen brightness work properly but everytime I reboot, the screen brightness is reverted to 100%, which is very annoying. I've already tried to add the following lines to /etc/rc.local but with no success (only the keyboard backlight stays off): #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo '1' > /sys/devices/platform/applesmc.768/leds/smc::kbd_backlight/brightness echo '6' > /sys/class/backlight/acpi_video0/brightness rfkill block bluetooth exit 0` This worked for me when I was using Ubuntu 12.04 and also did after the upgrade to 12.10 but then after rebooting the screen brightness always reverted to 100%. Would be nice if anyone knows how to fix this. My device: Macbook Pro 13" Late 2011 Thanks in advance!

  Read the article

• Help me start my Atheros AR9285 working on Ubuntu 12.10

  - by user100449

  Could you, pls, help me with my wireless card Atheros AR9285 on Ubuntu 10.12.. I've already went through all possible advices and still cannot start my wireless card. I have a laptop Toshiba Portege Z830 where Wifi've already worked under Windows 7. But after migration on Ubuntu 10.12. I'm not able get it work. My actual situation is on image bellow This is what I see on command lshw *-network UNCLAIMED description: Network controller product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:c0500000-c050ffff This is what I see on command rfkill list 0: Toshiba Bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: yes Hard blocked: no Any idea? Thank you Michal

  Read the article

• Wireless Not Working with Drivers Installed

  - by Haoran

  I'm new to Linux. I installed Ubuntu 12.10 on my old Compaq/Hp Preario V3000 to replace Windows XP. Every thing works fine except I'm getting no wireless network options in the network drop down menu. I'm using a cable at the moment. Wirless chipset is: 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 08:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02) I ran rfkill: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no I also ran iwconfig and got this lo no wireless extensions. eth0 no wireless extensions. In the additional drivers it says: "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary)" Any help to resolve the problem would be greatly appreciated.

  Read the article

< Previous Page | 1 2 3 4 5 6 7  | Next Page >