Search Results

Search found 62 results on 3 pages for 'rj regenold'.

Page 3/3 | < Previous Page | 1 2 3 

• 2 workstations won't connect to most websites, but will connect to some

  - by Dean

  I have a very frustrating issue I wasn't able to solve: 2 workstations which are used by the same user are not able to connect to most websites receivin a timeout, however they will load some websites specificly from my country. They are able to get the website addresses via DNS. Both stations have their internet connection through a remote router. Other stations in the same LAN are connecting fine. Here's what I tried: Virus scan Renewing IPs Reseting the workstations Moving one workstation to a different RJ-45 in the wall Reseting the hub and switch Checking the hosts file DNS flush Nothing seems to help. I am preparing a CD with more AV tools to see if there's anything hiding on the stations. UPDATE: It was an incorrect configuration in "Internet Options". I configured the correct proxy and now it works.

  Read the article

• What You Said: Your Favorite Co-Op Games

  - by Jason Fitzpatrick

  While competitive gaming is fun, reader response to this week’s Ask the Readers question shows that good old beat-the-bad-guys-together cooperative gaming is as popular as ever. Read on to see what your fellow readers are playing. By far the most popular nomination for favorite co-op game was an outright classic: 1987′s smash hit Contra. Originally released as an arcade game, it was ported to the Nintendo Entertainment System in 1988. Contra was groundbreaking for the time as it featured simultaneous play for the two players–you and a friend could play side by side without waiting to take your turn. Clearly that kind of side-by-side play resonated with readers. RJ writes: When my fiance and I played and beat Contra on the NES. I knew she was the one and we got married and its been great. That’s no small feat; Contra was voted “Toughest Game to Beat” by IGN.com readers. Even readers who had moved on to newer games still recall Contra fondly; Jami writes: The Gears of War trilogy on 360 is my favorite co-op currently, although I do have fond memories of bonding with my brother playing some co-op Contra on the NES. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• Gateway ZA8 Netbook graphics Issue

  - by Hansel

  The graphics keep tearing and are barely usable anytime I try to use my Netbook. And I did a full install with Ubuntu so I'm pretty much stuck. These are the specs of the Netbook: Processor AMD Athlon™ 64 L110 Single-Core Processor (1.2GHz, 800MHz FSB, 512KB L2 Cache)6 Operating System Genuine Windows Vista® Home Basic (32-bit) with SP1 Display 11.6" HD WXGA Ultrabright™ LED-backlit Display (1366 x 768 resolution, 16:9 aspect ratio)7 Memory 2048MB DDR2 533MHz SDRAM Single Channel Memory8 Hard Drive 250GB SATA hard drive2 Color Classic and Elegant Design with Cherry Red finish Wireless Network 802.11b/g Wi-Fi CERTIFIED®3 Adapter AC Adapter Application Software Microsoft® Works, Microsoft® Money Essentials, Microsoft® Office Home and Student 2007 (60-day complimentary trial period)1 Battery 6-Cell Lithium Ion (5200mAh) Chassis Chassis with ATI Radeon® X1270 Graphics and AMD RS690E Chipset8 Dimensions (Box) 3.1" (H) x 14.8" (W) x 10.1" (D) or 80mm (H) x 376mm (W) x 256mm (D) Dimensions (System) 1.03" (H) x 11.26" (W) x 7.99" (D) or 26.4mm (H) x 286mm (W) x 203mm (D) External Ports (3) USB 2.0, VGA Connector Keyboard and Mouse Keyboard with Multi-Gesture Touchpad Media Card Reader Multi-in-1 Digital Media Card Reader (Memory Stick®, Memory Stick Pro™, MultiMediaCard, Secure Digital™, xD-Picture Card™) Network 10/100 Ethernet LAN (RJ-45 port) What can I do?

  Read the article

• samba share not on network after upgrading to Ubuntu 12.04LTS.

  - by Sylvain Huard

  I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

  Read the article

• Can't install Ubuntu, black screen after install

  - by Tyrone

  I tried several times, but wasn't able to make it work. I tried all recent types of Ubuntu but it didn't work. Then I tried acpi=off at the beginning of the installation. In this way I could finish the installation. But after the restart Ubuntu didn't work. Only a black screen appeared. Before that I tried it on the VirtualBox and it work. By the way my system is the following: (I use windows 7 currently) Processor AMD Athlon II P320 (2,1 GHz, second-level cache 2 ? 512 KB, HT 1600 MHz bus) Chipset AMD M880G + SB850 Memory Dual Channel, 3 GB DDR3-1066 Wide Screen 15.6 “high-definition (1366 ? 768) c LED-backlit, AU Optronics B156XW02 Video Card AMD Radeon HD 4250, from 336 MB video buffer in memory, support for DirectX 10.1 and UVD Sound system: HDA-codec IDT 92HD81B1X AMD HDMI Audio Hard drive WDC WD3200BEVT-75A23T0 (298 GB, 5400 RPM, SATA 2.0) Optical Drive: DVD ± RW Optiarc AD-7585H Communication tools Fast Ethernet (10/100 Mbit / c) Realtek RTL8102E/RTL8103E WiFi 802.11a/b/g Broadcom BCM4310 Bluetooth 2.1 + EDR Card reader Memory Card Reader 7-in-1 with support for SD / SDHC / MMC / MS / xD, and derivatives Interfaces / ports 3 USB 2.0 1 eSATA + USB 2.0 15-pin video connector VGA HDMI RJ-45 Ethernet 10/100 Mbit / c 2 analog mini-jack: a microphone / headphone jack for a Kensington lock slot AC adapter Battery Li-Ion 6-cell capacity of 4400 mA ? h (10,8, 48 W ? hr) AC power adapter 65 Watt Additional equipment integrated web-camera (1.3 mega pixels)

  Read the article

• Shutting down Ubuntu 11.10 with power button without x11-session

  - by RJdaMoD

  when pressing the power-button inside a (gnome-)session, ubuntu asks me what to do and shuts down after 60 seconds anyway. No problem so far. But if i'm not logged in in a gnome-session (for example in the login screen), or just change to a tty, then the power-button won't work. But i remember that i worked in 11.04. So what's changed and how to restore? Background: I use my machine as a print server. If im not home and my wife wants to print sth., she used to switch on my machine, print via her laptop, and then just shut it down by power-button. Beginning of march i was on a business tour, and she called me that she could not shutdown my machine anymore. I shut it down by ssh, but this seems not the favorable way to me. I already had a look in /etc/acpi/powerbtn.sh and think that the line if pidof x $PMS > /dev/null; then exit is the cause for this since it aborts the script when no gui-power-manager is found. Is that right? But that does not explain with the power-button does not work when switching from the x11-session to a tty, although this would not be critical to me. Thanks in advance Greetings RJ

  Read the article

• samba share not on network after upgrading to Ubuntu 12.04LTS. [migrated]

  - by Sylvain Huard

  I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

  Read the article

• What is the minimal steps to setup a client-server network using Windows Server 2008 R2 standard?

  - by Motivated Student

  Background I have One computer server with Win Server 2008 R2 standard installed but it has not been configured. This server has 2 LAN adapters. One adapter is connected to ISP and the other one connected to HUB/Switch. Other computers working as clients are connected to the same HUB/Switch to which the server is connected. IP Printers, IP scanners, IP camera are also connected to the same HUB/Switch. Note: I am a newbie. I only know how to plug RJ-45 sockets and assembly computer peripherals. I have no prior experience in Windows Server at all. Please teach me from the newbie's point of view. Objective I want to establish the following: Each client can access the internet, printers, scanners after it has been successfully authenticated by the server. Unauthenticated clients cannot access the internet, printers, etc. The server hosts a local site. Clients can browse internally using a private domain www.company.com. If the same domain name has been used by other on the internet, my private domain must override the public domain.

  Read the article

• Can I get ethernet out of my Verizon FIOS set-top box?

  - by Tom Hughes

  Setup: my home network is long & skinny, and the FIOS-connected router is all the way at one of the apartment. At the other end, far away (and a floor higher) is my HD TV, which gets a cable-TV signal from a Verizon set-top box that is coax-connected back to the FIOS on-premises equipment. Wi-Fi won't work, the apartment is too stretched out, with old, thick walls and floors. Goal: I think there are three ways to get ethernet back to where the HD TV is: 1) run a cable! this isn't crazy but isn't cheap either (my building won't let me do it, it involves hiring an electrician because the cable would run partly through the public hallway ceiling) 2) split the coax near the TV and put in... a MoCA device? 3) somehow tease the set-top box, which has an RJ-11 (ethernet) port on the back, to give me network access. Question: any other choices? and, is one choice better than the others? #3 is by far the most desirable because it would involve the least wiring -- but I can't find any resources to help make it happen. #2 is a bit scary, I don't want to degrade service to the TV or anywhere else for that matter.

  Read the article

• High-performance Academic Server [closed]

  - by PHPsmith

  Suppose I want to build a server for the university's academic interests. The server is dedicated only to a site, where users (students and lecturers) just view and fill the academic data. But at a time (e.g. once a semester), about 12,000 students will access the site simultaneously. Due to limitation of resources, I have to build the server using free software (except for the operating system Windows 7, the university has been prepared). The hardware is also limited to the usual 4-core computers (eg, Ivy Bridge Intel Core i7-3770) with approximately 16GB of memory (DDR3 1600 MHz), equipped with an RJ-45 port (Intel 82 579 Gigabit Ethernet). With all these limitations, I have to choose the software (web server, database, etc) are appropriate for this purpose is achieved. I decided to create a site in PHP. Please help me by answering the following questions based on your expertise. (my prime candidate software to consider after googling) Web server which is faster & stable & secure, when implemented and optimized for PHP? And why? (nginx) PHP accelerator which is faster & stable & compatible with the selected web server? And why? (APC with Zend Optimizer+) Database which is faster & stable & secure, when implemented and optimized for selected web server and selected PHP accelerator? (MySQL) Are there any errors that have been or will be happening from my condition is? If there is, please enlighten me? Is there anything else I need to know in order to achieve this goal? If there is, please enlighten me? I understand that the performance also depends on the implementation of source-code program, so I assume it will create a site with the best efficiency (e.g. using AJAX).

  Read the article

• Creating a network adapter - how hard is it?

  - by Vilx-

  I'm interested in building a little (commercial) device on top of Arduino. I want it to be able to interface with network. Network as in standard Ethernet, Cat5, RJ-45, etc. I know that there is an Ethernet Shield, but it costs even more than the Arduino itself, and it's pretty big. Naturally, I want my device to be as small and as cheap as possible. So I'm thinking about recreating an Ethernet module myself. The problem is - I haven't got any experience with Ethernet, nor do I have a good idea where to start looking. Thus I can't even say if my ideas are feasible. Ultimately I would like the device to have three ports - one for incoming signal, two for outgoing, so the device is essentially a little switch where it is plugged in itself as well. The switching capabilities need not be very fast - the volume of data will be low. 10Mbit is more than enough, can be even slower. If that is not possible, a single port for controlling the device itself will also do. Another possibility I'm considering is power line communications - sending information through power lines. That's another area I've no experience with. What hardware should I be looking at, and where can I find information about the necessary software? So - can anyone tell me if these ideas are feasible, and if yes - where should I start looking?

  Read the article

• Varnish 3.0.2 to Apache2 sometimes return error 503

  - by Ronnie Jespersen

  Hey guys I hope you can help me out here. I have an Ngingx parsing http and https to a varnish cache(3.0.2). From the varnish it is sent to apache2. Now I have for some time been tracking some strange 503 errors. But I cant seem to find the silver bullet. Currently I am logging the 503 errors through varnish this way: sudo varnishlog -c -m TxStatus:503 >> /home/rj/varnishlog503.log and then referring to the apache access log to see if any 503 requests have been handled. Today I had a health check from the firewall that failed: 20 SessionOpen c 127.0.0.1 34319 :8081 20 ReqStart c 127.0.0.1 34319 607335635 20 RxRequest c HEAD 20 RxURL c /health-check 20 RxProtocol c HTTP/1.0 20 RxHeader c X-Real-IP: 192.168.3.254 20 RxHeader c Host: 192.168.3.189 20 RxHeader c X-Forwarded-For: 192.168.3.254 20 RxHeader c Connection: close 20 RxHeader c User-Agent: Astaro Service Monitor 0.9 20 RxHeader c Accept: */* 20 VCL_call c recv lookup 20 VCL_call c hash 20 Hash c /health-check 20 VCL_return c hash 20 VCL_call c miss fetch 20 Backend c 33 aurum aurum 20 FetchError c http first read error: -1 11 (No error recorded) 20 VCL_call c error deliver 20 VCL_call c deliver deliver 20 TxProtocol c HTTP/1.1 20 TxStatus c 503 20 TxResponse c Service Unavailable 20 TxHeader c Server: Varnish 20 TxHeader c Content-Type: text/html; charset=utf-8 20 TxHeader c Retry-After: 5 20 TxHeader c Content-Length: 879 20 TxHeader c Accept-Ranges: bytes 20 TxHeader c Date: Wed, 06 Jun 2012 12:35:12 GMT 20 TxHeader c X-Varnish: 607335635 20 TxHeader c Age: 60 20 TxHeader c Via: 1.1 varnish 20 TxHeader c Connection: close 20 Length c 879 20 ReqEnd c 607335635 1338986052.649786949 1338986112.648169994 0.000160217 59.997980356 0.000402689 Now the backend server (apache) does not have any 503 error in the access log at this point. So I am confused. Is this varnish throwing a 503 because it thinks apache is to slow? There is a lot traffic coming through at this point so I know the server is up and running. I do have other 503 error codes with posts and gets so there is really no pattern. It seems to be at random times and random requests. Even in the morning when the server dosen't seem to be doing anything. I do see another pattern in the log: 4 VCL_call c recv pass 4 VCL_call c hash 4 Hash c /?id=412 4 VCL_return c hash 4 VCL_call c pass pass 4 FetchError c no backend connection 4 VCL_call c error deliver 4 VCL_call c deliver deliver Here fetcherror says "no backend connection". A summery of the FetchErrors in todays log: 16 FetchError c http first read error: -1 11 (No error recorded) 5 FetchError c http first read error: -1 11 (No error recorded) 4 FetchError c http first read error: -1 11 (No error recorded) 19 FetchError c http first read error: -1 11 (No error recorded) 5 FetchError c http first read error: -1 11 (No error recorded) 23 FetchError c http first read error: -1 11 (No error recorded) 24 FetchError c http first read error: -1 11 (No error recorded) 16 FetchError c http first read error: -1 11 (No error recorded) 6 FetchError c http first read error: -1 11 (No error recorded) 4 FetchError c http first read error: -1 11 (No error recorded) 5 FetchError c http first read error: -1 11 (No error recorded) 4 FetchError c http first read error: -1 11 (No error recorded) 4 FetchError c http first read error: -1 11 (No error recorded) 22 FetchError c http first read error: -1 11 (No error recorded) 6 FetchError c http first read error: -1 11 (No error recorded) 21 FetchError c http first read error: -1 11 (No error recorded) 26 FetchError c no backend connection 4 FetchError c no backend connection 20 FetchError c http first read error: -1 11 (No error recorded) 39 FetchError c http first read error: -1 11 (No error recorded) I haven't changed the default timeout values for varnish. This is my configuration for one of the backend servers. backend xenon { .host = "192.168.3.187"; .port = "80"; .probe = { .url = "/health-check/"; .interval = 3s; .window = 5; .threshold = 2; } } I'm running prefork module on apache2 with this configuration <IfModule mpm_prefork_module> StartServers 1 MinSpareServers 2 MaxSpareServers 5 MaxClients 200 MaxRequestsPerChild 75 </IfModule> and only PHP files is sent to the server. Every other static file is handled by Nginx. Any ideas? ------- EDIT -------------- Some more debuging information I have run a varnishadm debug.health Backend radon is Healthy Current states good: 5 threshold: 2 window: 5 Average responsetime of good probes: 0.002560 Oldest Newest ================================================================ 4444444444444444444444444444444444444444444444444444444444444444 Good IPv4 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Good Xmit RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR Good Recv HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH Happy Backend xenon is Healthy Current states good: 5 threshold: 2 window: 5 Average responsetime of good probes: 0.002760 Oldest Newest ================================================================ 4444444444444444444444444444444444444444444444444444444444444444 Good IPv4 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Good Xmit RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR Good Recv HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH Happy Backend iridium is Healthy Current states good: 5 threshold: 2 window: 5 Average responsetime of good probes: 0.000849 Oldest Newest ================================================================ 4444444444444444444444444444444444444444444444444444444444444444 Good IPv4 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Good Xmit RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR Good Recv HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH Happy Backend aurum is Healthy Current states good: 5 threshold: 2 window: 5 Average responsetime of good probes: 0.002100 Oldest Newest ================================================================ 4444444444444444444444444444444444444444444444444444444444444444 Good IPv4 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Good Xmit RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR Good Recv HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH Happy And I have been monitoring varnishstat from the two load balancers 3224774 3.99 2.61 backend_conn - Backend conn. success 27 0.00 0.00 backend_unhealthy - Backend conn. not attempted 63 0.00 0.00 backend_fail - Backend conn. failures 358798 0.00 0.29 backend_reuse - Backend conn. reuses 21035 0.00 0.02 backend_toolate - Backend conn. was closed 379834 0.00 0.31 backend_recycle - Backend conn. recycles 26 0.00 0.00 backend_retry - Backend conn. retry 3217751 5.99 2.61 backend_conn - Backend conn. success 32 0.00 0.00 backend_fail - Backend conn. failures 364185 0.00 0.30 backend_reuse - Backend conn. reuses 27077 0.00 0.02 backend_toolate - Backend conn. was closed 391263 0.00 0.32 backend_recycle - Backend conn. recycles 36 0.00 0.00 backend_retry - Backend conn. retry Notice that none of them have reported backend_fail. /Ronnie

  Read the article

< Previous Page | 1 2 3