Search Results

Search found 489 results on 20 pages for 'routed'.

Page 3/20 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Set up a GUI managed firewall for other machines?

  - by Azendale

  What ways are there of setting up a firewall for traffic routed for other machines whose rules can be managed by a GUI? Can GUFW do it? FireStarter? (or should that be avoided because it is supposedly no longer updated?) *By filtering, I'm mean the traffic I am setting rules up for is not destined for this computer. It is either from or to other computers on my LAN. Say, for (a simplified, hypothetical) example: I have an ethernet connection at my dorm that I have plugged into eth0. It gets an address of 192.168.1.185 and I also have 192.168.185.0/24 routed to me, so I don't have to do any NAT. I have a hub attached to my second ethernet port (eth1) with a few Windows computers and I give addresses out of my 192.168.185.0/24 block with DHCP. How can I use my Ubuntu box to block incoming connections from eth0 that are being routed to my Windows computers and let through just a few specific ports (so fellow students can't see what files my Windows boxes are sharing via SMB)?

  Read the article

• Java - Call to start method on thread : how does it route to Runnable interface's run () ?

  - by Bhaskar

  Ok , I know the two standard ways to create a new thread and run it in Java : 1 Implement Runnable in a class , define run method ,and pass an instance of the class to a new Thread. When the start method on the thread instance is called , the run method of the class instance will be invoked. 2 Let the class derive from Thread, so it can to override the method run() and then when a new instance's start method is called , the call is routed to overridden method. In both methods , basically a new Thread object is created and its start method invoked. However , while in the second method , the mechanism of the call being routed to the user defined run() method is very clear ,( its a simple runtime polymorphism in play ), I dont understand how the call to start method on the Thread object gets routed to run() method of the class implementing Runnable interface. Does the Thread class have an private field of Type Runnable which it checks first , and if it is set then invokes the run method if it set to an object ? that would be a strange mechanism IMO. How does the call to start() on a thread get routed to the run method of the Runnable interface implemented by the class whose object is passed as a parameter when contructing the thread ?

  Read the article

• BSD route(8) MAN page bug

  - by Farseeker

  http://www.freebsd.org/cgi/man.cgi?query=route Route is a utility used to manually manipulate the network routing tables. It normally is not needed, as a system routing table management daemon such as routed(8), should tend to this task. ... BUGS The first paragraph may have slightly exaggerated routed(8)'s abilities. Is this really a "bug", or some developer's attempt at humour?

  Read the article

• Updating Pages after migration of website

  - by DLackey

  My web site was coded in Coldfusion and over the years has obtained a good ranking. I recently migrated the front-end to a Wordpress site and wanted to know what is ideal way of updating Google and the various search engines of of the updates. For example, the home page of index.cfm is no longer valid since it's index.php. I've submitted an updated sitemap.xml file to Google. I'm sure my site will slip some while the search engines re-index my site but I'd like to try and minimize this as much as possible with the holidays coming up (my site is a service oriented site that caters to people who travel during the holidays). Right now, the old .cfm pages are still online but are re-routed to the appropriate Wordpress page (for example, about.cfm is now routed to /about/ using a cflocation tag.). Not sure if I should pull down the .cfm pages all together or leave them in place until the new pages are picked up by the search engines. Any advice would be helpful.

  Read the article

• How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

  - by M. Tibbits

  Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

  Read the article

• Can web applications running on IIS7 Windows Server 2008 R2 be forced to immediately detect changes to hosts file?

  - by Brenda Bell

  We have several web applications running on several load-balanced servers. We want to have our web applications communicate with each other without first traversing outside the load balancer. For example: http://appA.example.com is running on 192.0.2.1 and 192.0.2.2 http://appB.example.com is also running on 192.0.2.1 and 192.0.2.2 The load balancer's public IP address is 198.51.100.3 By default, when appA on 192.0.2.1 makes a call to a WCF service hosted in appB, the HTTP request is routed to 192.51.100.3; this establishes a new session and the load balancer will direct the call to either of the two servers We want the call to be routed to the instance of appB running on the same server so we add 192.0.2.1 appB.example.com to the hosts file on 192.0.2.1. This eventually works, but we either have to wait for the app pool to naturally recycle or do a manual reset before appA sees the new address. Is there any way to have the change automatically detected without having to recycle the app pool?

  Read the article

• Zscaler. Certs, cookies, and port 80 traffic

  - by 54's_lol

  So I work at HQ for a large company that shall remain nameless. We use Zscaler and I had to roll out a 2048 cert per zscaler's request. People around me at work dont understand the technology and think that the cert's are what is allowing internet connectivity. From my understanding(and please chime in) is the cookie located C:\Users\$$$$$$4$$\AppData\Roaming\Macromedia\Flash Player#SharedObjects\Q3JQJQJV\gateway.zscaler.net\zscaler.swf here that gets created when you provide your creds the first time you use the browser. The cert's are just simply a way of inspecting the SSL traffic as zscaler had no way of doing this before without them. They are essentially using the classic MITM attack to parse your SSL traffic. Gmail is smart enough to recognize this as you get a warning. My question is this, is there a product or service that I can use to verify my web browser when at home(I.E. off company network) isn't still getting routed to zscaler's cloud? If i do a tracert that will work fine. It's the port 80 and 443 web traffic zscaler and my company is after. I would like to verify that when I'm off their premise that my web traffic is using only my isp and the path to whatever content I'm searching for. Do the cert's i'm pushing and browser authentication do something behind the curtain that forces web traffic to get routed to zscaler? I searched quite a bit and would very much like to know if I'm ever off company scrutiny. I do know zscaler offers the service to force the scenario im asking about. Can I prove how my web traffic is getting routed? Thanks for any insight. I've been a fan for a long time and your guy's kung fu is very strong:-)

  Read the article

• ICMP Redirect Theory VS. Application

  - by joeqwerty

  I'm trying to watch ICMP redirects in a lab using Cisco Packet Tracer (version 5.3.2) and I'm not seeing them, which leads me to believe that either my lab configuration isn't correct or my understanding of ICMP redirects isn't correct or that Packet Tracer doesn't support/use ICMP redirects. Here's what I believe to be true regarding ICMP redirects: Routers send ICMP redirects when all of these conditions are met: The interface on which the packet comes into the router is the same interface on which the packet gets routed out. The subnet or network of the source IP address is on the same subnet or network of the next-hop IP address of the routed packet. The datagram is not source-routed. The router kernel is configured to send redirects. I have the lab set up in Cisco Packet Tracer as displayed in the image and would expect to see an ICMP redirect from Router1 when pinging from PC1 to PC3. I'm not seeing the ICMP redirect and it looks like Router1 is actually routing all of the packets via Router2. I have IP ICMP debugging enabled on Router1 (and Router2) and I'm not seeing any ICMP redirect activity in either console. I'm also not seeing a route to the PC3 network in the routing table on PC1, which I think confirms that the ICMP redirect is not occurring. I'm using only static routing on Routers 1 and 2. Is my understanding of ICMP redirects incorrect, or is there a problem with my lab configuration or does Packet Tracer not support/use ICMP redirects?

  Read the article

• VLAN for WiFi traffic separation (new to VLANing)

  - by Philip

  I run a school network with switches in different departments. All is routed through to a central switch to access the servers. I would like to install WiFi access points in the different departments and have this routed through the firewall (an Untangle box that can captive-portal the traffic, to provide authentication) before it gets onto the LAN or to the Internet. I know that the ports that the APs connect to on the relevant switches need to be set to a different VLAN. My question is how do I configure these ports. Which are tagged? Which are untagged? I obviously don't want to interrupt normal network traffic. Am I correct in saying: The majority of the ports should be UNTAGGED VLAN 1? Those that have WiFi APs attached should be UNTAGGED VLAN 2 (only) The uplinks to the central switch should be TAGGED VLAN 1 and TAGGED VLAN 2 The central switch's incoming ports from the outlying switches should also be TAGGED VLAN 1 and TAGGED VLAN 2 There will be two links to the firewall (each on its own NIC), one UNTAGGED VLAN 1 (for normal internet access traffic) and one UNTAGGED VLAN 2 (for captive portal authentication). This does mean that all wireless traffic will be routed over a single NIC which will also up the workload for the firewall. At this stage, I'm not concerned about that load.

  Read the article

• Exchange 2007 ignoring Send Connectors (again)

  - by gravyface

  Wow, I'm at a loss here -- I posted this exact same question a while back and it's doing the exact same thing: my Send Connector I've created for "Microsoft Domains" (hotmail.com cost 1) is being ignored again and routed through the "Default" Send Connector (* cost 10). Last time, I had the same cost for both Send Connectors, but I've tried setting the Default connector to 5, 10, 100, etc. and regardless, all mail gets routed through that connector (which smarthosts through Postini). Besides calling an air strike on Redmond, what else can I do? MS is blocking Postini again, need to get this working permanently.

  Read the article

• Set up a GUI managed stateful filtering firewall?

  - by Azendale

  What ways are there of setting up a stateful filtering* firewall whose rules can be managed by a GUI? Can GUFW do it? FireStarter? (or should that be avoided because it is supposedly no longer updated?) *By filtering, I'm mean the traffic I am setting rules up for is not destined for this computer. It is either from or to other computers on my LAN. Say, for (a simplified, hypothetical) example: I have an ethernet connection at my dorm that I have plugged into eth0. It gets an address of 192.168.1.185 and I also have 192.168.185.0/24 routed to me, so I don't have to do any NAT. I have a hub attached to my second ethernet port (eth1) with a few Windows computers and I give addresses out of my 192.168.185.0/24 block with DHCP. How can I use my Ubuntu box to block incoming connections from eth0 that are being routed to my Windows computers and let through just a few specific ports (so fellow students can't see what files my Windows boxes are sharing via SMB)?

  Read the article

• Change the order of DNS lookup when connected in the VPN

  - by qwerty2010

  Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

  Read the article

• Change the order of DNS lookup when connected in the VPN

  - by qwerty2010

  Hi, Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• Disabling URL decoding in nginx proxy

  - by Tomasz Nurkiewicz

  When I browse to this URL: http://localhost:8080/foo/%5B-%5D server (nc -l 8080) receives it as-is: GET /foo/%5B-%5D HTTP/1.1 However when I proxy this application via nginx: location /foo { proxy_pass http://localhost:8080/foo; } The same request routed through nginx port is forwarded with path decoded: GET /foo/[-] HTTP/1.1 Decoded square brackets in the GET path are causing the errors in the target server (HTTP Status 400 - Illegal character in path...) as they arrive un-escaped. Is there a way to disable URL decoding or encode it back so that the target server gets the exact same path when routed through nginx? Some clever URL rewrite rule?

  Read the article

• Default gateway is in different subnet. How to configure in RHEL6.2

  - by Dmytro Leonenko

  I have two subnets routed to my server from ISP. I have only one gateway ip. The gateway is on the same VLAN as my IP address. For example netowrk 1 is 1.0.0.0/24 and network 2 is 2.0.0.0/24. Both are routed to eth0 by my ISP. Gateway is 1.0.0.1. My host ip is 2.0.0.1/24 (eth0) So I can configure default gateway manually with ip route add default dev eth0 ip route add default via 1.0.0.1 and then internet connection works properly. How do I configure it in /etc/sysconfig/network-scripts/ifcfg-eth0 ? I tried to set GATEWAY=1.0.0.1 but it doesn't work. Tried to set GATEWAY and GATEWAYDEV in /etc/sysconfig/network and it does only what first command from listing above do.

  Read the article

• How do I configure pfsense as an outbound VPN client?

  - by Avery Chan

  We use pfsense as a router/firewall. Because we're based in China, it is useful for us to have VPN access for all our internal clients. Instead of each individual client connecting to a VPN server stateside, I'd like to configure pfsense as a VPN client and have all the network traffic be routed through it. Most of the posts I've seen regarding pfsense and VPN are concerning connecting to the LAN from outside; this is not what I want to do. Another option would be for an SSH tunnel to be initiated on the pfsense box with the LAN traffic routed through it. How do I configure pfsense to be able to do either of these? One huge caveat is that OpenVPN cannot be used. The solution I am looking for needs to use one of the other VPN protocols.

  Read the article

• Routing traffic to specific web sites through Ethernet, rest via wifi on Mac OS X 10.6?

  - by user32448

  Hi I have two separate Internet connections connected to a Mac and I'd like one of them (via Ethernet eth0 gateway 192.168.2.1) to serve for just backing up to an remote online storage, and the other one (via Airport en1 gateway 192.168.1.1) for all other Internet traffic. I tried using "route" from the terminal as follows: sudo route add -host 98.207.226.113 -interface eth0 (just for testing against the site www.whatismyip.org whose IP is 98.207.226.113, to see through which gateway the traffic is routed) I can see using netstat that the route is added: $ netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 49 0 en1 98.207.226.113 192.168.2.1 UGSc 0 0 eth0 However, the traffic in this case does NOT get routed properly through Ethernet, as if the routing definition I made is ignored. Any ideas? Thanks!

  Read the article

• IIS 7.5 and ASP.NET MVC Routing

  - by m__

  I'm running an ASP.NET MVC 3 application on an IIS 7.5 server (my development server). When I set up my production server something goes wrong. Serving the same application binaries, using the same web.config file and connecting to the same database I get different results. Something must be wrong with my IIS configuration, but what? Here's an example I visit http://mysite.com/An/AspNetMvc/Routed/Address/1 and everything works I visit http://mysite.com/An/AspNetMvc/Routed/Address/1.1 works on my development server but not on my production server which gives the following error HTTP Error 404.0 - Not Found The resource you are looking for has been removed, had its name changed, or is temporarily unavailable. Module IIS Web Core Notification MapRequestHandler Handler StaticFile Error Code 0x80070002 Somehow the URL is served as a static file on my production server which led me to investigate my IIS Handler Mappings, but without luck.

  Read the article

• Stream post URL security and wall post links

  - by Jeff Lee

  Our app's mobile client can create wall post links to our app's web-facing pages. Since this happens in the context of a mobile app, we do this on behalf of our user using the Graph API's feed/message endpoint. I noticed that the links showing up in the wall posts are being routed through our app's auth dialog, which is NOT what we want. We just want transparent links, without forcing the client to auth our app, similar to what happens when you share to FB in Path. I went ahead and disabled the "Stream post URL option" several hours ago, but we still seem to be getting the re-routed links for wall posts. The target URLs for these links are within the domain we've registered for our Facebook app. Is there anything else I need to do fix this?

  Read the article

• Linq query joining with a subquery

  - by Alan Fisher

  I am trying to reproduce a SQL query using a LINQ to Entities query. The following SQL works fine, I just don't see how to do it in LINQ. I have tried for a few hours today but I'm just missing something. SELECT h.ReqID, rs.RoutingSection FROM ReqHeader h JOIN ReqRoutings rr ON rr.ReqRoutingID = (SELECT TOP 1 r1.ReqRoutingID FROM ReqRoutings r1 WHERE r1.ReqID = h.ReqID ORDER BY r1.ReqRoutingID desc) JOIN ReqRoutingSections rs ON rs.RoutingSectionID = rr.RoutingSectionID Edit*** Here is my table scema- Requisitions: ReqID PK string ReqDate datetime etc... ReqRoutings: ID PK int ReqID FK RoutingSection FK int RoutingDate ReqRoutingSections: Id PK int RoutingSection string The idea is that each Requisition can be routed many times, for my query I need the last RoutingSection to be returned along with the Requisition info. Sample data: Requisitions: - 1 record ReqID 123456 ReqDate '12/1/2012' ReqRoutings: -- 3 records id 1 ReqID 123456 RoutingSection 3 RoutingDate '12/2/2012' id 2 ReqID 123456 RoutingSection 2 RoutingDate '12/3/2012' id 3 ReqID 123456 RoutingSection 4 RoutingDate '12/4/2012' ReqRoutingSections: -- 3 records id 2 Supervision id 3 Safety id 4 Qaulity Control The results of the query would be ReqID = '123456' RoutingSection = 'QualityControl' -- Last RoutingSection requisition was routed to

  Read the article

• Silverlight Cream for March 05, 2011 -- #1053

  - by Dave Campbell

  In this all-sumbittal (while I was at MVP11) Issue: Michael Washington(-2-), goldytech, JFo, Andrea Boschin, Jonathan Marbutt, Gregor Biswanger, Michael Wolf, and Peter Kuhn. Above the Fold: Silverlight: "A Simple Bindable CheckboxList Control" Jonathan Marbutt WP7: "Struggles with the Panorama Control" JFo Lightswitch: "HTML (including HTML 5) and LightSwitch at the same time?" Michael Washington From SilverlightCream.com: LightSwitch vs HTML 5 ? In his first post-MVP11 post, Michael Washington takes on HTML5 with a Lightswitch discussion. Good discussion follows in the comments also. HTML (including HTML 5) and LightSwitch at the same time? Michael Washington's 2nd post is a great tutorial on creating a re-usable business layer with Lightswitch... all good stuff, and look for more from Michael as Lightswitch matures. How to add Computed Properties in WCF Ria Services on client goldytech has a new post up about providing real-time solutions to client-side calculations with WCF RIA services. Struggles with the Panorama Control JFo details a problem he had with the Panorama control on WP7... detailing 4 problems she had and her solutions... well thought-out explanations too.. a definite good read... and another blogger to add to my list! Windows Phone 7 - Part #7: Understanding Push Notifications Andrea Boschin has part 7 of his WP7 series up at SilverlightShow, concentrating on Push Notifications this time out... great explanation of push notifications in this tutorial from the service and phone side with a working sample to boot. A Simple Bindable CheckboxList Control Jonathan Marbutt took a completely different direction than most and created his own Bindable CheckboxList by starting with ContentControl rather than a Listbox as most do... pretty cool and all the source. Own routed events in Silverlight I met Gregor Biswanger at the MVP Summit and asked him to send me his blog run through Microsoft Translator ... here's a great post on routed events he did back in November... and a discussion of his CallMethodAction Behavior... which looks like another good post subject! Creating a Silverlight Out-of-Browser Splash Screen Michael Wolf has a post up discussing OOB splash screens... I like his "White screen of Awesome" definition ... I'm very familiar with that :) ... check out his solution for getting around that white screen, and lots of external links too. XNA for Silverlight developers: Part 5 - Input (touch + gestures) Peter Kuhn has Part 5 in his tutorial series on XNA for Silverlight devs up at SilverlightShow... this time covering touch and gestures ... how to enable and read gestures, and the difference between Silverlight and XNA in the touch department. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Introduction to Human Workflow 11g

  - by agiovannetti

  Human Workflow is a component of SOA Suite just like BPEL, Mediator, Business Rules, etc. The Human Workflow component allows you to incorporate human intervention in a business process. You can use Human Workflow to create a business process that requires a manager to approve purchase orders greater than $10,000; or a business process that handles article reviews in which a group of reviewers need to vote/approve an article before it gets published. Human Workflow can handle the task assignment and routing as well as the generation of notifications to the participants. There are three common patterns or usages of Human Workflow: 1) Approval Scenarios: manage documents and other transactional data through approval chains . For example: approve expense report, vacation approval, hiring approval, etc. 2) Reviews by multiple users or groups: group collaboration and review of documents or proposals. For example, processing a sales quote which is subject to review by multiple people. 3) Case Management: workflows around work management or case management. For example, processing a service request. This could be routed to various people who all need to modify the task. It may also incorporate ad hoc routing which is unknown at design time. SOA 11g Human Workflow includes the following features: Assignment and routing of tasks to the correct users or groups. Deadlines, escalations, notifications, and other features required for ensuring the timely performance of a task. Presentation of tasks to end users through a variety of mechanisms, including a Worklist application. Organization, filtering, prioritization and other features required for end users to productively perform their tasks. Reports, reassignments, load balancing and other features required by supervisors and business owners to manage the performance of tasks. Human Workflow Architecture The Human Workflow component is divided into 3 modules: the service interface, the task definition and the client interface module. The Service Interface handles the interaction with BPEL and other components. The Client Interface handles the presentation of task data through clients like the Worklist application, portals and notification channels. The task definition module is in charge of managing the lifecycle of a task. Who should get the task assigned? What should happen next with the task? When must the task be completed? Should the task be escalated?, etc Stages and Participants When you create a Human Task you need to specify how the task is assigned and routed. The first step is to define the stages and participants. A stage is just a logical group. A participant can be a user, a group of users or an application role. The participants indicate the type of assignment and routing that will be performed. Stages can be sequential or in parallel. You can combine them to create any usage you require. See diagram below: Assignment and Routing There are different ways a task can be assigned and routed: Single Approver: task is assigned to a single user, group or role. For example, a vacation request is assigned to a manager. If the manager approves or rejects the request, the employee is notified with the decision. If the task is assigned to a group then once one of managers acts on it, the task is completed. Parallel : task is assigned to a set of people that must work in parallel. This is commonly used for voting. For example, a task gets approved once 50% of the participants approve it. You can also set it up to be a unanimous vote. Serial : participants must work in sequence. The most common scenario for this is management chain escalation. FYI (For Your Information) : task is assigned to participants who can view it, add comments and attachments, but can not modify or complete the task. Task Actions The following is the list of actions that can be performed on a task: Claim : if a task is assigned to a group or multiple users, then the task must be claimed first to be able to act on it. Escalate : if the participant is not able to complete a task, he/she can escalate it. The task is reassigned to his/her manager (up one level in a hierarchy). Pushback : the task is sent back to the previous assignee. Reassign :if the participant is a manager, he/she can delegate a task to his/her reports. Release : if a task is assigned to a group or multiple users, it can be released if the user who claimed the task cannot complete the task. Any of the other assignees can claim and complete the task. Request Information and Submit Information : use when the participant needs to supply more information or to request more information from the task creator or any of the previous assignees. Suspend and Resume :if a task is not relevant, it can be suspended. A suspension is indefinite. It does not expire until Resume is used to resume working on the task. Withdraw : if the creator of a task does not want to continue with it, for example, he wants to cancel a vacation request, he can withdraw the task. The business process determines what happens next. Renew : if a task is about to expire, the participant can renew it. The task expiration date is extended one week. Notifications Human Workflow provides a mechanism for sending notifications to participants to alert them of changes on a task. Notifications can be sent via email, telephone voice message, instant messaging (IM) or short message service (SMS). Notifications can be sent when the task status changes to any of the following: Assigned/renewed/delegated/reassigned/escalated Completed Error Expired Request Info Resume Suspended Added/Updated comments and/or attachments Updated Outcome Withdraw Other Actions (e.g. acquiring a task) Here is an example of an email notification: Worklist Application Oracle BPM Worklist application is the default user interface included in SOA Suite. It allows users to access and act on tasks that have been assigned to them. For example, from the Worklist application, a loan agent can review loan applications or a manager can approve employee vacation requests. Through the Worklist Application users can: Perform authorized actions on tasks, acquire and check out shared tasks, define personal to-do tasks and define subtasks. Filter tasks view based on various criteria. Work with standard work queues, such as high priority tasks, tasks due soon and so on. Work queues allow users to create a custom view to group a subset of tasks in the worklist, for example, high priority tasks, tasks due in 24 hours, expense approval tasks and more. Define custom work queues. Gain proxy access to part of another user's tasks. Define custom vacation rules and delegation rules. Enable group owners to define task dispatching rules for shared tasks. Collect a complete workflow history and audit trail. Use digital signatures for tasks. Run reports like Unattended tasks, Tasks productivity, etc. Here is a screenshoot of what the Worklist Application looks like. On the right hand side you can see the tasks that have been assigned to the user and the task's detail. References Introduction to SOA Suite 11g Human Workflow Webcast Note 1452937.2 Human Workflow Information Center Using the Human Workflow Service Component 11.1.1.6 Human Workflow Samples Human Workflow APIs Java Docs

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely http://serverfault.com/questions/187231/accessing-ip-restricted-server-from-dynamic-ip which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was http://serverfault.com/questions/136806/static-ip-for-dynamic-ip the first answer seems exactly what I need but I dont know how I would go about on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >