Search Results

Search found 1372 results on 55 pages for 'sha 512'.

Page 3/55 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Ubuntu installer does not show drives

  - by Tanweer Rashid

  I am trying to install Ubuntu 12.04 LTS on my Inspiron laptio, but the installer does not show any drives. My system has a 1TB SATA drive and a 32GB SSD. As far as I can figure, the boot files are kept on the SSD for fast startup (for Windows). During Win7 installation, I had to manually load drivers for RAID controller to see all available drives. Running fdisk -l from the live CD shows the following: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b4782 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 81920 41627647 20772864 7 HPFS/NTFS/exFAT /dev/sda3 41627648 357019647 157696000 7 HPFS/NTFS/exFAT /dev/sda4 357019648 1953517567 798248960 f W95 Ext'd (LBA) /dev/sda5 672415744 1312966655 320275456 7 HPFS/NTFS/exFAT /dev/sda6 1312968704 1953517567 320274432 7 HPFS/NTFS/exFAT Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b474b Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive ubuntu@ubuntu:~$ In the Ubuntu installer, I can only choose /dev/sdb for "Device for boot loader installation", and sdb doesn't show any drives. I cannot select /dev/sda. Any ideas anyone? Thanks.

  Read the article

• Unable to mount an LVM Hard-drive after upgrade

  - by Bruce Staples

  I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

  Read the article

• How can I get rid of the motd message "*** /dev/sdb1 will be checked for errors at next reboot ***"? [duplicate]

  - by kmm

  This question already has an answer here: Persistent “disk will be checked…” in the message of the day (motd) even after reboot 3 answers My motd persistently has: *** /dev/sdb1 will be checked for errors at next reboot *** The problem is that I don't have /dev/sdb1 on my system. I only have /dev/sdb2 (mouted as /) and /dev/sda1 which mounts to /media/backup. I delete that line from /etc/motd, but it reappears after reboot. Here's my df output: Filesystem Size Used Avail Use% Mounted on /dev/sdb2 73G 3.7G 66G 6% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 760K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm /dev/sda1 1.9T 429G 1.4T 25% /media/backup Update Here is the output of sudo fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dfc2 Device Boot Start End Blocks Id System /dev/sda1 63 3907024064 1953512001 83 Linux Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049068 Device Boot Start End Blocks Id System /dev/sdb1 152301568 156301311 1999872 82 Linux swap / Solaris /dev/sdb2 * 2048 152301567 76149760 83 Linux Partition table entries are not in disk order I guess /dev/sdb1 is my swap space.

  Read the article

• Grub not loading after Windows 8 Install

  - by RazorXsr

  My system was configured to dual boot Ubuntu 12.04.1 LTS and Windows 7. Today I got my hands on the MSDN release of Windows 8 and I installed it over my Windows 7. Now the computer just boots to Windows 8 directly without loading the GRUB screen. So I followed the steps as suggested in: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows. Running this command: ls -l /dev/disk/by-label/ gives the following output: total 0 lrwxrwxrwx 1 root root 10 Sep 11 07:51 Entertainment -> ../../sda2 lrwxrwxrwx 1 root root 10 Sep 11 02:45 PENDRIVE -> ../../sdb1 Also fdisk -l command gives this as the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1246aa23 Device Boot Start End Blocks Id System /dev/sda1 * 2048 319582199 159790076 7 HPFS/NTFS/exFAT /dev/sda2 319582208 602906623 141662208 7 HPFS/NTFS/exFAT /dev/sda3 602908672 625135615 11113472 83 Linux Disk /dev/sdb: 1939 MB, 1939865600 bytes 64 heads, 63 sectors/track, 939 cylinders, total 3788800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 2248 3788799 1893276 c W95 FAT32 (LBA) So I assume that I have to run this: sudo grub-install /dev/sda3 to get GRUB up and running. But I am getting this error: /usr/sbin/grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?). Can anyone please guide me in the right direction? The current Ubuntu installation is far too customized to my needs to lose it to a boot manager issue! Any help is much appreciated!

  Read the article

• How do I get 12.04 to recognize swap partition so that I can hibernate?

  - by Kayla

  I justed installed 12.04 and used gparted to erase and enlarge my swap partition. When I rebooted, gparted said that the file partition for the swap was unknown. Gparted doesn't let me change the file partition to "linux-swap". It does let me change it to NTFS, but when I reboot, it goes back to "unknown". Thanks in advance for your help. Output from sudo swapon -s: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 9025532 0 -1 Output from sudo fdisk -l: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d63ac84 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2459647 1228800 7 HPFS/NTFS/exFAT /dev/sda2 2459648 197836472 97688412+ 7 HPFS/NTFS/exFAT /dev/sda3 466890752 488395119 10752184 7 HPFS/NTFS/exFAT /dev/sda4 197836798 466890751 134526977 5 Extended /dev/sda5 197836800 448837631 125500416 83 Linux /dev/sda6 448839680 466890751 9025536 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mapper/cryptswap1: 9242 MB, 9242148864 bytes 255 heads, 63 sectors/track, 1123 cylinders, total 18051072 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x951b7f53 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

  Read the article

• Setup access to SAS RAID drives with NTFS partitions on CentOS Machine

  - by Quanano

  We have a Dell Poweredge 2900 system with Adaptec 39320A SCSI CONTROLLER CARD and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on the other raid array with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log

  Read the article

• SHA-1 and Unicode

  - by Andrew

  Hi everyone, Is behavior of SHA-1 algorithm defined for Unicode strings? I do realize that SHA-1 itself does not care about the content of the string, however, it seems to me that in order to pass standard tests for SHA-1, the input string should be encoded with UTF-8.

  Read the article

• Mounting ddrescue image after recovery (in over my head)

  - by BorgDomination

  I'm having problems mounting the recovery image. I've tried to mount the image multiple ways. quark@DS9 ~ $ sudo mount -t ext4 /media/jump1/1recover/sdb1.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so quark@DS9 ~ $ sudo mount -r -o loop /media/jump1/1recover/sdb1.img recover mount: you must specify the filesystem type quark@DS9 ~ $ sudo mount /media/jump1/1recover/sdb1.img mnt mount: you must specify the filesystem type It doesn't even give me detailed information on the file I just made, nautilus says it's 160gb. quark@DS9 ~ $ file /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img: data quark@DS9 ~ $ mmls /media/jump1/1recover/sdb1.img Cannot determine partition type I'm not sure what I'm doing wrong or if I started this process incorrectly from the beginning. I've outlined what I've done so far below. I'm clueless, I'd appreciate if someone had some input for me. What I have done from the beginning My laptop has two hard drives. One has the dual boot Win7 / Linux Mint system files. Secondary one contained my /home folder. The laptop was jarred and the /home disk was broken. I tried a LiveCD recovery, it failed. Wouldn't even load a Live session with the disk installed. So I turned to ddrescue. quark@DS9 ~ $ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009fc18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 112642047 56320000 7 HPFS/NTFS/exFAT /dev/sda2 138033152 312580095 87273472 83 Linux /dev/sda3 112644094 138033151 12694529 5 Extended /dev/sda5 112644096 132173823 9764864 83 Linux /dev/sda6 132175872 138033151 2928640 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002a8ea Device Boot Start End Blocks Id System /dev/sdb1 * 63 312576704 156288321 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed6d054b Device Boot Start End Blocks Id System /dev/sdc1 63 1953520064 976760001 7 HPFS/NTFS/exFAT sda - 160g internal, holds all system files and all computer functions. sdb - 160g internal, BROKEN, contains about 140g of data I'd like to recover. sdc - 1T external, contains recovery image. Only place that has space to do all this. From this site, https://apps.education.ucsb.edu/wiki/Ddrescue I used this script to create an image of the broken hard drive. I changed the destination to the external USB drive. #!/bin/sh prt=sdb1 src=/dev/$prt dst=/media/jump1/1recover/$prt.img log=$dst.log sudo time ddrescue --no-split $src $dst $log sudo time ddrescue --direct --max-retries=3 $src $dst $log sudo time ddrescue --direct --retrim --max-retries=3 $src $dst $log Everything looked like it came off without a hitch: quark@DS9 ~ $ sudo bash recover1 Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued: 160039 MB, errsize: 4096 B, current rate: 35588 B/s ipos: 3584 B, errors: 1, average rate: 22859 kB/s opos: 3584 B, time from last successful read: 0 s Finished 12.78user 1060.42system 1:56:41elapsed 15%CPU (0avgtext+0avgdata 4944maxresident)k 312580958inputs+0outputs (1major+601minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 4096 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 13 B/s opos: 1536 B, time from last successful read: 1.3 m Finished 0.00user 0.00system 3:43.95elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 238inputs+0outputs (3major+374minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 1024 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 0 B/s opos: 1536 B, time from last successful read: 3.7 m Finished 0.00user 0.00system 3:43.56elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 8inputs+0outputs (0major+376minor)pagefaults 0swaps It looks like, from where I'm standing it worked perfectly. Here's the log: # Rescue Logfile. Created by GNU ddrescue version 1.14 # Command line: ddrescue --direct --retrim --max-retries=3 /dev/sdb1 /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img.log # current_pos current_status 0x00000600 + # pos size status 0x00000000 0x00000400 + 0x00000400 0x00000400 - 0x00000800 0x254314FC00 + I'm not sure how to proceed. Does this mean all of my data is lost???????? Appreciate ANY input!

  Read the article

• How to resize / enlarge / grow a non-LVM ext4 partition

  - by Mischa

  I have already searched the forums, but couldnt find a good suitable answer: I have an Ubuntu Server 10.04 as KVM Host and a guest system, that also runs 10.04. The host system uses LVM and there are three logical volumes, which are provided to the guest as virtual block devices - one for /, one for /home and one for swap. The guest had been partitioned without LVM. I have already enlarged the logical volume in the host system - the guest successfully sees the bigger virtual disk. However, this virtual disk contains one "good old" partition, which still has the old small size. The output of fdisk -l is me@produktion:/$ LC_ALL=en_US sudo fdisk -l Disk /dev/vda: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c8ce7 Device Boot Start End Blocks Id System /dev/vda1 * 1 3917 31455232 83 Linux Disk /dev/vdb: 2147 MB, 2147483648 bytes 244 heads, 47 sectors/track, 365 cylinders Units = cylinders of 11468 * 512 = 5871616 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2bf7 Device Boot Start End Blocks Id System /dev/vdb1 1 366 2095104 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(0, 43, 28) Partition 1 has different physical/logical endings: phys=(260, 243, 47) logical=(365, 136, 44) Disk /dev/vdc: 225.5 GB, 225485783040 bytes 255 heads, 63 sectors/track, 27413 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027f25 Device Boot Start End Blocks Id System /dev/vdc1 1 9138 73398272 83 Linux The output of parted print all is Model: Virtio Block Device (virtblk) Disk /dev/vda: 32.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 32.2GB 32.2GB primary ext4 boot Model: Virtio Block Device (virtblk) Disk /dev/vdb: 2147MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2146MB 2145MB primary linux-swap(v1) Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 What I want to achieve is to simply grow or resize the partition /dev/vdc1 so that it uses the whole space provided by the virtual block device /dev/vdc. The problem is, that when I try to do that with parted, it complains: (parted) select /dev/vdc Using /dev/vdc (parted) print Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 (parted) resize 1 WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Start? [1049kB]? End? [75.2GB]? 224GB Error: File system has an incompatible feature enabled. Compatible features are has_journal, dir_index, filetype, sparse_super and large_file. Use tune2fs or debugfs to remove features. So what can I do? This is a headless production system. What is a safe way to grow this partition? I CAN unmount it, though - so this is not the problem.

  Read the article

• Performance of SHA-1 Checksum from Android 2.2 to 2.3 and Higher

  - by sbrichards

  In testing the performance of: package com.srichards.sha; import android.app.Activity; import android.os.Bundle; import android.widget.TextView; import java.io.IOException; import java.io.InputStream; import java.security.MessageDigest; import java.security.NoSuchAlgorithmException; import java.util.zip.ZipEntry; import java.util.zip.ZipFile; import com.srichards.sha.R; public class SHAHashActivity extends Activity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); TextView tv = new TextView(this); String shaVal = this.getString(R.string.sha); long systimeBefore = System.currentTimeMillis(); String result = shaCheck(shaVal); long systimeResult = System.currentTimeMillis() - systimeBefore; tv.setText("\nRunTime: " + systimeResult + "\nHas been modified? | Hash Value: " + result); setContentView(tv); } public String shaCheck(String shaVal){ try{ String resultant = "null"; MessageDigest digest = MessageDigest.getInstance("SHA1"); ZipFile zf = null; try { zf = new ZipFile("/data/app/com.blah.android-1.apk"); // /data/app/com.blah.android-2.apk } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } ZipEntry ze = zf.getEntry("classes.dex"); InputStream file = zf.getInputStream(ze); byte[] dataBytes = new byte[32768]; //65536 32768 int nread = 0; while ((nread = file.read(dataBytes)) != -1) { digest.update(dataBytes, 0, nread); } byte [] rbytes = digest.digest(); StringBuffer sb = new StringBuffer(""); for (int i = 0; i< rbytes.length; i++) { sb.append(Integer.toString((rbytes[i] & 0xff) + 0x100, 16).substring(1)); } if (shaVal.equals(sb.toString())) { resultant = ("\nFalse : " + "\nFound:\n" + sb.toString() + "|" + "\nHave:\n" + shaVal); } else { resultant = ("\nTrue : " + "\nFound:\n" + sb.toString() + "|" + "\nHave:\n" + shaVal); } return resultant; } catch (IOException e) { e.printStackTrace(); } catch (NoSuchAlgorithmException e) { e.printStackTrace(); } return null; } } On a 2.2 Device I get average runtime of ~350ms, while on newer devices I get runtimes of 26-50ms which is substantially lower. I'm keeping in mind these devices are newer and have better hardware but am also wondering if the platform and the implementation affect performance much and if there is anything that could reduce runtimes on 2.2 devices. Note, the classes.dex of the .apk being accessed is roughly 4MB. Thanks!

  Read the article

• Can ECC registred RAM 512 MB DDR-400 be used on thinclients - specifically Neoware CA10/CA22?

  - by Ramaswami Murugan

  Can ECC registered RAM 512 MB DDR-400 be used on thin clients - specifically Neoware CA10/CA22? Neoware thin clients (now HP Thin clients e100/e140) have 2 slots for a max of 1 Gb of DDR-400 RAM (184 Pin PC3200). I notice that the price of ECC reg RAM is considerably less than that of non-reg RAM ($10 for ECC reg 512 MB vs $24 for non-ECC reg 512 MB) so this approach is worth it for me to upgrade my memory on numerous thin clients (approx 40). The BIOS is Phoenix E686 and the chipset is VIA 800MHz - 1 Ghz.

  Read the article

• Concept behind SHA-1 Checksum

  - by Vishwas Gagrani

  What's the basis behind SHA-1 or SHA-2 or other Checksum algorithms? I read about it here http://en.wikipedia.org/wiki/SHA-1#Data_Integrity But I am still wondering about an answer in a layman's language. Can I understand it as a very, very compressed code that can be translated back into original data? Let's say, I have a letter written in notepad. Then the whole of my 1 A4 page size data can be converted into something like this "9b90417b6a186b6f314f0b679f439c89a3b0cdf5". So whenever I want my original data back, I can convert this back into original data? I am very sure that I am wrong here, because it is weird how data that itself contains combination of letters and numbers can be represented by smaller set of letters and numbers. Illogical! Then, what's the basic?

  Read the article

• How to repair an external harddrive?

  - by dodohjk

  I would like to reformat my hard disk, and if possible recover the (somewhat unimportant) contents if possible. I have a Western Digital 1TB hard drive which had a NTFS partition. I unplugged the drive without safely removing it first. At first a pop up was asking me to use a Windows OS to run the chkdsk /f command, however, in the effort to keep using a Linux OS I used the ntfsfix command on the ubuntu terminal Now, when I try to access the hard drive, it doesn't show up anymore in Nautilus. I tried reformatting it using Disk Utility, but it gives me an error message, and Gparted would hang on the "Scanning devices" step infinitely. Please comment any output that you would like to see and I will add it to my question. EDIT disk utility tells me is on /dev/sdb the command sudo fdisk -l gives dodohjk@DodosPC:~$ sudo fdisk -l [sudo] password for dodohjk: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006fa8c Device Boot Start End Blocks Id System /dev/sda1 * 4094 482344959 241170433 5 Extended /dev/sda2 482344960 488396799 3025920 82 Linux swap / Solaris /dev/sda5 4096 31461127 15728516 83 Linux /dev/sda6 31463424 52434943 10485760 83 Linux /dev/sda7 52436992 62923320 5243164+ 83 Linux /dev/sda8 62924800 482344959 209710080 83 Linux Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6e697373 This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sdb1 ? 1936269394 3772285809 918008208 4f QNX4.x 3rd part /dev/sdb2 ? 1917848077 2462285169 272218546+ 73 Unknown /dev/sdb3 ? 1818575915 2362751050 272087568 2b Unknown /dev/sdb4 ? 2844524554 2844579527 27487 61 SpeedStor Partition table entries are not in disk order I wrote something wrong here, however here the output of fsck /dev/sbd is dodohjk@DodosPC:~$ sudo fsck /dev/sdb fsck from util-linux 2.20.1 e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device&gt;

  Read the article

• Ubuntu installation does not recognize drive partitioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Ubuntu 11.10 doesn't detect external usb hard drive

  - by Andrew

  I have been batting with this issue for a bit and cannot find the answer to it. So the Dmesg see's the device, being Symwave WDC WD64.... media@Media-pc:~$ dmesg | tail -n 20 [78678.719497] scsi 10:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 0 CCS [78678.725621] scsi 10:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 0 CCS [78684.073837] scsi 11:0:0:0: Direct-Access SYMWAVE WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 4 [78691.008126] scsi 11:0:0:0: uas_eh_abort_handler tag 0 [78691.008139] scsi 11:0:0:0: uas_eh_device_reset_handler tag 0 [78691.008147] scsi 11:0:0:0: uas_eh_target_reset_handler tag 0 [78691.008154] scsi 11:0:0:0: uas_eh_bus_reset_handler tag 0 [78691.080307] usb 2-2.4: reset high speed USB device number 9 using ehci_hcd [78691.221427] scsi 11:0:0:0: Device offlined - not ready after error recovery [78691.221498] scsi 11:0:0:0: rejecting I/O to offline device [78691.221519] scsi 11:0:0:0: rejecting I/O to offline device [78691.222952] scsi 11:0:0:1: Enclosure SYMWAVE SES 3B01 PQ: 0 ANSI: 4 [78691.223156] scsi 11:0:0:2: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [78691.225061] sd 11:0:0:0: Attached scsi generic sg3 type 0 [78691.225344] ses 11:0:0:1: Attached Enclosure device [78691.225495] ses 11:0:0:1: Attached scsi generic sg4 type 13 [78691.226266] sd 10:0:0:0: Attached scsi generic sg5 type 0 [78691.226653] sd 10:0:0:1: Attached scsi generic sg6 type 0 [78691.241647] sd 10:0:0:0: [sdd] Attached SCSI removable disk [78691.243832] sd 10:0:0:1: [sde] Attached SCSI removable disk It looks like it attaches sdd and sde. Now when i look in the disk utility it shows "Hard disk Symwave WD6400AAKS-0 device /dev/sdc doesn't show any other info then that, if i format, it says that it cannot open /dev/sdc no device or address error. Underneeth the device it does show two general usb3.0 CRW that are sdd and sde. Now if I do a fdisk -l it doesn't show the device: media@Media-pc:~$ sudo fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000247de Device Boot Start End Blocks Id System /dev/sda1 * 2048 152176639 76087296 83 Linux /dev/sda2 152178686 156301311 2061313 5 Extended /dev/sda5 152178688 156301311 2061312 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x948fc822 Device Boot Start End Blocks Id System /dev/sdb1 63 1953520064 976760001 7 HPFS/NTFS/exFAT So now I am confused. Any ideas how I get fdisk to see the device?

  Read the article

• Can't access external hard drives or thumb drives

  - by calden

  I am not a complete linux noob but I don't know a lot either and would greatly appreciate some help with this. I just installed Ubuntu 10.10 onto my laptop. Everything is working great however USB devices such as thumb drives and external hard drives wont show up. I have been looking around a bit and when I run sudo fdisk -l it displays this: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065684 Device Boot Start End Blocks Id System /dev/sda1 * 1 29255 234983424 83 Linux /dev/sda2 29255 30402 9212929 5 Extended /dev/sda5 29255 30402 9212928 82 Linux swap / Solaris Disk /dev/sdb: 16.0 GB, 16026435072 bytes 64 heads, 32 sectors/track, 15283 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000df90d Device Boot Start End Blocks Id System /dev/sdb1 * 1 15283 15649776 7 HPFS/NTFS It does seem to display my 16 gig thumb drive but other then seeing it here I cant access it to read and write files to it. It does the same with my external hard drive. I know those devices work as I have tried them on my other computer and they are working fine. Also this is what is in fstab if this will help anybody help me: proc /proc proc nodev,noexec,nosuid 0 0 /dev/sdb1 / ext4 errors=remount-ro 0 1 /dev/sdb5 none swap sw 0 0 Thank you very much for the help everyone.

  Read the article

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Ubuntu doesn't "see" external USB Hard Disk

  - by Mina Michael

  It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB. Edits: Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it? I tried this: sudo mount /dev/sdb1 /mnt But gives this: mount: special device /dev/sdb1 does not exist I also tried: sudo mount /dev/sdc1 /mnt but it stays with no output forever. I left it in background for about 30 min.s. sudo fdisk -l gives out this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa42d04a3 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 80325 102481919 51200797+ 7 HPFS/NTFS/exFAT /dev/sda3 263874558 312580095 24352769 5 Extended /dev/sda4 102481920 263872511 80695296 7 HPFS/NTFS/exFAT /dev/sda5 263874560 310505471 23315456 83 Linux /dev/sda6 310507520 312580095 1036288 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5822aaea Device Boot Start End Blocks Id System /dev/sdc1 2048 976769023 488383488 7 HPFS/NTFS/exFAT The part below "Partition table entries are not in disk order" takes about 5 minutes to appear. The outputs of ls /dev/ | grep sd before and after connecting the HDD: before: sda sda1 sda2 sda3 sda4 sda5 sda6 ,after: sda sda1 sda2 sda3 sda4 sda5 sda6 sdd sdd1 The second output has the lines sdd and sdd1 different from the first one. IT SHOWED THE FILES!! The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

  Read the article

• Are Windows partitions gone?

  - by Gigili

  I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

  Read the article

• SD Card only mounted after a reboot

  - by evothur

  Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Cannot load from raid with grub

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... This is my partial fdisk -l output: Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Anybody can resolve this issue? I have big headache with this.

  Read the article

• why does the partition start on sector 2048 instead of 63

  - by gcb

  I had two drives partitioned the same and running 2 raid partitions on each. One died and I replaced it under warranty for the same model. While trying to partition it, the first partition can only start on sector 2048, instead of 63 that was before. Driver have different geometry as previous and remaining ones. (Fewer heads/more cylinders) old drive: $ sudo fdisk -c -u -l /dev/sdb Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000aa189 Device Boot Start End Blocks Id System /dev/sdb1 * 63 174080339 87040138+ 83 Linux /dev/sdb2 174080340 182482334 4200997+ 82 Linux swap / Solaris /dev/sdb3 182482335 3907024064 1862270865 fd Linux raid autodetect remanufactured drive received from warranty: $ sudo fdisk -c -u -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 81 heads, 63 sectors/track, 765633 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d0b5d Device Boot Start End Blocks Id System /dev/sda1 2048 ... why is that?

  Read the article

• How do I copy files between harddrives on Ubuntu CLI?

  - by ed209

  I have a dedicated server with a 120gb main ssd. The server happens to come with a couple of 3000GB hard drives. I'd like to use them to back up my main drive. Preferably, I'd like one as an exact copy of the main SSD and the other with incremental backups of the mysql database and a user uploads file. These are the drives I have Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2e18 Device Boot Start End Blocks Id System /dev/sda1 2048 4196352 2097152+ 83 Linux /dev/sda2 4198400 5246976 524288+ 83 Linux /dev/sda3 5249024 234441647 114596312 83 Linux Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table The first problem I have, is that I have no idea how to copy from one drive to another. Kind of embarrassing I know, but I don't know where to start. I'm thinking of this in terms of Mac OS cli where I'm able to copy between /Volumes - is there an equivalent? (there is nothing under /mnt or /media)

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >