Search Results

Search found 7740 results on 310 pages for 'split sound'.

Page 3/310 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• USB sound card with 6.3mm jack output

  - by Andrei Rinea

  I have a pair of Sennheiser 555 semi-professional headphones. These have a 6.3mm jack and a 3.5mm jack adapter. I wish I could buy an USB sound card for my laptop that would have a 6.3mm output not 3.5mm so I could skip this adapter and lose less quality. Any recommendations?

  Read the article

• xvidcap: Error accessing sound input from /dev/dsp

  - by stivlo

  I'm running Ubuntu 11.10 and I'm trying xvidcap to record a screencast with audio from the microphone, however it can't record any sound: $ xvidcap --file appo.avi --cap_geometry 700x500-0+0 Error accessing sound input from /dev/dsp Sound disabled! Sure enough /dev/dsp doesn't even exist: $ sudo ls -lh /dev/dsp ls: cannot access /dev/dsp: No such file or directory I found a blog post about fixing xvidcap sound input, however if I try the suggestion I get: $ sudo modprobe snd-pcm-oss FATAL: Module snd_pcm_oss not found. So the question is, how can I create /dev/dsp? The problem behind the problem is: how can I record sound from the microphone with xvidcap? So workarounds are welcome too. UPDATE: I've followed the suggestion of James, and something has improved. The error accessing /dev/dsp is gone, however now I get: [oss @ 0x8e0c120] Estimating duration from bitrate, this may be inaccurate xtoffmpeg.c add_audio_stream(): Can't initialize fifo for audio recording Now when I record xvidcap appears in the recording tab of pavucontrol and I can choose Audio stream from Internal Audio Analog Stereo or Monitor of Internal Audio Analog Stereo, I tried both just in case, but the video is still mute. UPDATE 2: I found that "Monitor of" is the one to record application sounds, while for microphone, I should choose "Internal Audio Analog Stereo". To rule out other problems, such as with the microphone, I tried with gnome-sound-recorder and it works. Actually I jumped on my chair, since the volume was too high! :-)

  Read the article

• Sound stopped working

  - by Brian West

  I ran through the troubleshooting at https://help.ubuntu.com/community/SoundTroubleshooting It did not play the test sound, and it also does not play sounds during speaker-test. It does play sounds when I adjust my volume on my computer (using pommed). It worked just the other day, but this is the first time I've tested it since last night, when I put it to pm-suspend-hybrid and it half-woke up (the backlight came on, but it didn't fully wake up), then went back, then half-woke again, but was frozen like that. I had to do a manual reboot of the machine when that happened. Now my sound doesn't work, except for adjusting the volume (where the little "beep" sound plays). During the troubleshooting, it recognized my sound card, the sound modules, and the sound card's installation. I've tried removing ~/.pulse, but to no avail. Also, if it's any help, pulseaudio is running, but pulseaudio --check returns nothing, which the manpage suggests indicates an error. Edit: I should probably clarify that the wake up from the suspend-hybrid was not provoked in any way. I was laying in bed when I noticed my room was brighter suddenly, so I got up to check on it.

  Read the article

• Problem with sound driver

  - by JiminP

  I had problem that sound had lag in Flash. (Other than that, there was no problem.) On the internet, I found that installing OSS4 might help me. So I installed OSS4, but there was some problems (no sound on Flash, and couldn't use function key on the laptop - which is quite annoying), so I try to remove OSS4 and re-installing sound modules. After some mess-up, the whole sound was gone. I used Ubuntu for a year, but I don't know how to use the terminal well (All I know is basic commands like sudo, ls, or apt-get).. Now I'm trying to recover by following instructions at this page, but I have some problems... :( When I try to follow instructions: sudo aplay -l finds no sound drivers. find /lib/modules/'uname -r' | grep snd (backtick changed to ' due to code markup) returns nothing. When I try to do sudo apt-get install linux-restricted-modules-'uname -r' linux-generic, it says that it can't find linux-restricted-modules-3.0.0-13-generic package. lspci -v | grep -A7 -i "audio" returns this, which doesn't contain anything about the name of the driver. Writing sudo modprobe sn and pressing tab twice only returns sudo modprobe sn9c102. sudo aptitude --purge reinstall linux-sound-base alsa-base alsa-utils linux-image-'uname -r' linux-ubuntu-modules-'uname -r' libasound2 returns this, and didn't change non of above. sudo apt-get install linux-alsa-driver-modules-$(uname -r) fails because it can't find the package linux-alsa-driver-modules-3.0.0-13-generic. Compiling ALSA driver doesn't work. When I try to make, it says that /lib/modules/3.0.0-13-generic/build/include/linux/modversions.h doesn't exist. I'm using Ubuntu 11.10. Can anyone help me? I can re-install Ubuntu, but I don't want to....

  Read the article

• Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

  - by Schof

  This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

  Read the article

• Need a little help with sound in a JApplet

  - by jacob schuschel

  I am working on a solitaire game in Java, and i need to implement sound when the desk is shuffled, card flipped, etc. I used the following sites as reference to try and get it to work, but i am getting Null Pointer Exceptions or mishandled URL exception (depending on what i tweak). here Also, i am using netbeans 6.7.1 as my IDE. I will try to break down the code and explain: package cardgame; import java.applet.*; import java.util.logging.Level; import java.util.logging.Logger; import javax.swing.JApplet; import javax.swing.*; import java.io.*; import java.net.*; /** * * @author jacob */ public class Sound extends JApplet { private AudioClip song; // Sound player private String URL = null; private URL songPath; // Sound path /* *sound_1 = shuffling cards *sound_2 = to discard *sound_3 = from discard *sound_4 = cardflip 1 *sound_5 = cardflip 2 */ Sound(String filename) { try { songPath = new URL(getCodeBase(),filename); // Get the Sound URL } catch (MalformedURLException ex) { Logger.getLogger(Sound.class.getName()).log(Level.SEVERE, null, ex); } song = getAudioClip(songPath); // Load the Sound } Sound(int i) { URL = "./sounds/sound_" + i + ".wav"; System.out.println(URL); try { songPath = new URL(URL); // Get the Sound URL song = getAudioClip(songPath); } catch (MalformedURLException ex) { Logger.getLogger(Sound.class.getName()).log(Level.SEVERE, null, ex); } } public void playSound() { song.loop(); // Play } public void stopSound() { song.stop(); // Stop } public void playSoundOnce() { song.play(); // Play only once } } The 2 different construcors are for different ways i tried to implement this. The first one creates the filepath, and passes it in. The second one builds the filepath in the constructor, given a sound # (i made a list of what numbers correspond to what sound for reference). I am getting the followig errors out: ./sounds/sound_1.wav Nov 16, 2009 4:14:13 PM cardgame.Sound ./sounds/sound_2.wav SEVERE: null java.net.MalformedURLException: no protocol: ./sounds/sound_1.wav ./sounds/sound_3.wav at java.net.URL.(URL.java:583) at java.net.URL.(URL.java:480) at java.net.URL.(URL.java:429) ./sounds/sound_4.wav ./sounds/sound_5.wav at cardgame.Sound.(Sound.java:46) at cardgame.Game.loadSounds(Game.java:712) at cardgame.Game.(Game.java:62) at cardgame.Main.main(Main.java:25) Nov 16, 2009 4:14:13 PM cardgame.Sound SEVERE: null java.net.MalformedURLException: no protocol: ./sounds/sound_2.wav at java.net.URL.(URL.java:583) at java.net.URL.(URL.java:480) at java.net.URL.(URL.java:429) at cardgame.Sound.(Sound.java:46) at cardgame.Game.loadSounds(Game.java:712) at cardgame.Game.(Game.java:62) at cardgame.Main.main(Main.java:25) Nov 16, 2009 4:14:13 PM cardgame.Sound SEVERE: null java.net.MalformedURLException: no protocol: ./sounds/sound_3.wav at java.net.URL.(URL.java:583) at java.net.URL.(URL.java:480) at java.net.URL.(URL.java:429) at cardgame.Sound.(Sound.java:46) at cardgame.Game.loadSounds(Game.java:712) at cardgame.Game.(Game.java:62) at cardgame.Main.main(Main.java:25) Nov 16, 2009 4:14:13 PM cardgame.Sound SEVERE: null java.net.MalformedURLException: no protocol: ./sounds/sound_4.wav at java.net.URL.(URL.java:583) at java.net.URL.(URL.java:480) at java.net.URL.(URL.java:429) at cardgame.Sound.(Sound.java:46) at cardgame.Game.loadSounds(Game.java:712) at cardgame.Game.(Game.java:62) at cardgame.Main.main(Main.java:25) Nov 16, 2009 4:14:13 PM cardgame.Sound SEVERE: null java.net.MalformedURLException: no protocol: ./sounds/sound_5.wav at java.net.URL.(URL.java:583) at java.net.URL.(URL.java:480) at java.net.URL.(URL.java:429) at cardgame.Sound.(Sound.java:46) at cardgame.Game.loadSounds(Game.java:712) at cardgame.Game.(Game.java:62) at cardgame.Main.main(Main.java:25) Thanks for those who read and more thanks to those who help. I know it is somewhat long, but i would rather get it all out there, than have 50 questions that come back or have people not answer due to lack of initial info. also only lets me post a single link right now, so the links are given below dreamincode.net/forums/showtopic14083.htm stackoverflow.com/questions/512436/java-playing-wav-sounds deitel.com/articles/java_tutorials/20060422/LoadingPlayingAudioClips/index.html

  Read the article

• no hdmi sound on Ubuntu 12.04 LTS

  - by bart

  i'm very new to ubuntu/linux. I installed Ubuntu 12.04 LTS on my vista laptop (nvidia gpu) in dual boot and with some help of google i'm almost ready to go. The only thing that i can't figure out is how to play sound trough my hdmi connected to my tv. Speakers of the laptop are ok, in te sound settings i can see -hdmi -digital -speaker outputs. The top 2 won't play sound so i googled around, found a bunch of things to try but the only thing succesfull so far was to erase all the drivers from the audio settings and they stayed gone. So finally i re-installed from scratch but still no sound trough hdmi. Re-installed 6times in the last 3 days now so the only thing left for me is reaching out for help/advice about this. How can i play sound on my tv connected with hdmi? I will be glad to give more info if needed cuz this is driving me crazy, thanks for your help in advance ! Bart.

  Read the article

• No sound in Ubuntu 12.04

  - by Mohd Arafat Hossain

  I installed Ubuntu 12.04 a month ago and am using it till now. I failed to notice that all this time there was no sound at all while running Ubuntu, even while playing a game in Wine. The weird thing is that only the startup sound comes when I log in (Indian/African drum tone), then comes the utter silence. I tested both Digital Output (S/PDIF) and the speakers in the sound settings but can hear nothing. Any help?

  Read the article

• Sound problems in Unity - input but no output

  - by ana

  I am new to Ubuntu, having just installed it for the first time on my Lenovo Thinkpad. Since I installed it I have no sound output whatsoever. However, I can see from the graphical interface in Sound Preferences Input that the sound input appears to be working correctly. I have tried the following: https://help.ubuntu.com/community/HdaIntelSoundHowto https://wiki.ubuntu.com/Audio/InstallingLinuxAlsaDriverModules ubuntu-bug audio I have two sound cards, cat card0/codec* | grep Codec Codec: Conexant CX20585 Codec: Conexant ID 2c06 cat card1/codec* | grep Codec Codec: Nvidia GPU 0b HDMI/DP Codec: Nvidia GPU 0b HDMI/DP Codec: Nvidia GPU 0b HDMI/DP Codec: Nvidia GPU 0b HDMI/DP And now have pretty much run out of ideas. Can anybody help?

  Read the article

• Car engine sound simulation

  - by Petteri Hietavirta

  I have been thinking how to create realistic sound for a car. The main sound is the engine, then all kind of wind, road and suspension sounds. Are there any open source projects for the engine sound simulation? Simply pitching up the sample does not sound too great. The ideal would be to something that allows me to pick type of the engine (i.e. inline-4 vs v-8), add extras like turbo/supercharger whine and finally set the load and rpm. Edit: Something like http://www.sonory.org/examples.html

  Read the article

• Sound unavailable every other session

  - by Oxwivi

  On my desktop running Oneiric, sometimes there's no sound at all, but it would work normally at other times. My setup is built ground-up from minimal Ubuntu, but since sounds work fine, at times, I don't think it is a backend dependency issue. When it works, it will play anything from regular audio files and movies to YouTube Flash players. For the record, I installed LXDE with the alsa-base and alsa-utils packages which are the only audio-related dependencies for the lubuntu-desktop. For a while, I also used persistent Oneiric live USB, and do not recall any sound issues. It's one thing to not play sound entirely, but playing sound only under some very unclear circumstances is something else. Please help me diagnose it.

  Read the article

• Periodic clicking sound from PC speaker

  - by John J. Camilleri

  After an update some months ago, my laptop has begun making a low, repeated clicking sound every few seconds. It is not being generated through the regular sound system, as altering the volume and even muting the sound does not make any difference. My regular audio works fine, by the way, so I am guessing this is some sort of PC speaker, since I cannot hear the click when I listen through regular headphones. Strangely, when I open the sound settings dialog the click magically disappears. I don't need to change any settings; if I simply leave the dialog open in the background then the problem disappears. Any ideas what this could be? I am running regular Ubuntu 12.04, and this is the output from lspci -v | grep -A7 -i "audio": 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 0349 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 54200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Sound in Ubuntu 12.10 on Chromebook

  - by Paul Mennega

  I've got an HP Chromebook 14 that I've rooted and installed Ubuntu via Crouton (upgraded to 12.10) and most things are working nicely. One issue that I am having trouble solving relates to sound. I've got sound output that I can control via the individual app (e.g. Youtube), but when trying to control the volume via the built-in xfce4-mixer, I get the following error: GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem. Opening a terminal, I can run the alsamixer and control the volume levels. It is reporting back that the card is CRAS. I'd love to be able to do it from XFCE and the built-in mixer. I've tried re-installing the GStreamer packages, but no luck. It seems like I am close but not sure where to go from here. On a maybe unrelated note, plugging headphones into the headphone jack in Ubuntu also does not stop the sound from coming from the speakers and nothing comes through the headphones. Switching back to ChromeOs, everything works as expected, so I think that it's a driver issue.

  Read the article

• Strange sound issues with Ubuntu 11.10

  - by DNA

  I am having strange issues with sound and volume with Ubuntu 11.10 I've noticed very often, especially when I get my computer out of sleep, it lacks sound even though the volume slider is cranked all the way up. But when I plug my headphones in and then take them out, it seems to kick start my sound back! What gives? What daemon in /etc/int.d needs to be restared with the restart command to fix this? I have the following in my init.d folder /etc/init.d/alsa-restore and /etc/init.d/alsa-store Also, my start up ubuntu sound doesn't play either....

  Read the article

• how to make a continuous machine gun sound-effect

  - by Jan

  I am trying to make an entity fire one or more machine-guns. For each gun I store the time between shots (1.0 / firing rate) and the time since the last shot. Also I've loaded ~10 different gun-shot sound-effects. Now, for each gun I do the following: function update(deltatime): timeSinceLastShot += deltatime if timeSinceLastShot >= timeBetweenShots + verySmallRandomValue(): timeSinceLastShot -= timeBetweenShots if gunIsFiring: displayMuzzleFlash() spawnBullet() selectRandomSound().play() But now I often get a crackling noise (which I assume is when two or more guns are firing at the same time and confuse the sound-device). My question is whether A) This a common problem and there is a well-known solution, maybe to do with the channels or something, or B) I am using a completely wrong approach to the task. I had a look at some sound-assets for other games and they used complete burst with multiple shots. I suppose I could try that, but I would like to have organic little hickups in the gun-fire (that's what the random value is for) to make the game more gritty and dirty. I am using Panda3D, but I had the exact same problem in PyGame and SDL. [edit] Thanks a lot for the answers so far! One more problem with faking it though: Now how do I stop the sound? Let's say I have an effect with 5 bangs... *bang* *bang* *bang* *bang* *bang* And I magically manage to loop it so that there's no gap or overlap if the player fires more than 5 shots. Now, what do I do if the player stops firing halfway through the third bang? How do I know how long to keep playing the sample so that the third bang is completed and I can start playing the rumbling echo of the last shot? Of course I can look up the shot/pause timing of that sound-sample and code accordingly, but it feels extremely hacky.

  Read the article

• Intermittent sound on an Medion Akoya S5610

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• play sound from different applications on different output devices (speakers, headphones)

  - by Mike

  I want music (played e.g. via Audacious) to be played on speaker system, and all other sounds produced by other applications (including ubuntu sound effects) to be played on headphones. My computer has sound connectors at its back, and also connectors on its front panel. When I connect both headphones and speakers, only headphones work (I take it, the front connectors take precedence?). Should I purchase another sound card (in addition to the motherboard-integrated sound I have)? When I go to Audacious output settings, I see only the ouput plugin selection list, with PulseAudio selected and options like ALSA, OSS4 etc. But there's no facility to select particular output device (and I guess it wouldn't magically appear even if I had the second soundcard). Is this at all possible to bind specific application to particular output device?

  Read the article

• No sound card detected [elementary os]

  - by Silouane Gerin

  h61 I set up a computer for my parents with elementary os. I installed an Asus P8H61-I motherboard which contains an integrated Realtek ALC887 sound card. The system doesn't recognize the sound card. Here are the results of some commands: lspci | grep audio doesn't return anything, alsa force-reload return Unloading ALSA sound driver modules: (none loaded). Loading ALSA sound driver modules: (none to reload). aplay -l no soundcard detected and cat /proc/asound/cards let me know that asound doesn't exist. I tried installing Realtek drivers but nothing happened. Here is a log from alsa : Log Can someone help me? Thanks.

  Read the article

• No sound on laptop speakers on an Acer Aspire 6920

  - by snewix

  Computer: Acer Aspire 6920 Card: HDA Intel Chip: Realtek ALC889 My problem is that the laptop build-in speakers don't play any sound. When i plug in my headphones the sound works normally, the same goes with external speakers. Those work normally like the headphones. The profile in the Sound settings is Analog two-way Stereo. I am using Ubuntu 12.04. Might trere be any problem with my sound drivers or something similar? Any form of help appreciated.

  Read the article

• Ubuntu Surround Sound Help?

  - by Adam

  I am running Ubuntu 12.10 on a Sony Vaio VGC-RB34G ( http://reviews.cnet.com/desktops/sony-vaio-vgc-rb34g/4505-3118_7-31289053.html ) with an integrated Realtek High Definition Audio sound card. On Windows, I can set up the sound card to provide sound to my surround sound system from the Line Out, Line In, and Mic ports, as in all of these are producing audio. I have tried to use alsa to achieve this result with no luck. Is there any possible way to do this on Ubuntu? Thanks! Here is a Picture of the manager I have on Windows and the result I want to achieve https://picasaweb.google.com/106733704390489891165/November102012#5809378929755566722

  Read the article

• loss of sound in ubuntu 12.04

  - by Leo Simon

  I'm running Linux E6520 3.2.0-56-generic #86-Ubuntu SMP Wed Oct 23 09:20:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux on a Dell Latitude E6530. (This is a new machine; have run the same version of linux on an older machine for a year, without this happening.) I've been losing sound regularly, though have not been able to isolate the trigger for this. I've scoured the web on this subject, in particular https://help.ubuntu.com/community/SoundTroubleshootingProcedure and Audio stopped working suddenly in 12.04 Nothing from the first site seemed to work for me. From the second site, I learned enough to be able to fix the problem when it happens, but nothing on the web has helped me figure out why the problem is happening in the first place. Patching together stuff from the web, and with some blind luck, I've found that the following steps seem to restore sound pulseaudio --kill pulseaudio --start pavucontrol -> output devices Click on the "Mute audio" icon, which mutes audio Click on the "Mute audio" icon, which unmutes audio. This obviously doesn't make sense: audio wasn't muted in the first place, but somehow, magically, toggling mute audio off and on seems to reset something. Can anybody suggest from this information why sound would be disappearing in the first place (it seems as though something is getting muted at the system level, but I don't know what)? a simpler (command-line/script) way of restoring sound, in particular, is it possible to reset pavucontrol from the commandline? Some other pieces of information that may be of use: The problem is clearly happening at the system level, since I've set up a clean new user, and this user has the same problems that I do. So user fixes like deleting the .pulse directory aren't (and don't) help. Sound works fine in Windows (dual-boot) so it's not a hardware problem Any help/suggestions on this would be most appreciated.

  Read the article

• What is this type of sound effect called?

  - by Fibericon

  There is a sound typically associated with a bright flash of light, which starts with a lower whirring noise, then breaks into a higher pitched sound. What is that type of sound called? I'm not sure how to begin searching for that, so a typical name for it would be very helpful. It's something similar to what occurs at 0:41 in this youtube video (here's a link to a few seconds beforehand), where Naruto 6 tails transforms into Kyuubei in Naruto Generations.

  Read the article

• Intermittent sound

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• No sound into headphones

  - by quack1

  I will make it quick : I have no sound in my headphones when they are plugged in on my Asus F200CA running Ubuntu 14.04, but : I have sound in the laptop speakers when the headphones are plugged out. If I boot up my laptop on a Live USB running Ubuntu 14.04, I have sound in the speakers and in the headphones. If I open pavucontrol, I can "see" sound, but I can't hear it. I already did some of the actions listed here. I'm running Ubuntu 14.04, with Unity, and this bug appeared about a week ago.

  Read the article

• Crackling sound from microphone recently, in 13.04

  - by Patrig Droumaguet

  I use 13.04 since the release and I use Skype which was working well. But recently I've had remarks saying my voice was "crackling", even if the voice from my interlocutor was perfect. Making a test with Audacity and Cheese, I've seen that every recorded sound (with the front microphone of my laptop or a jack microphone) was crackling. It's not really like saturating, the sound has a lot of annoying pops. I've tried to check the settings, they were still on PulseAudio. I've even tried the extreme solution : re-installing Ubuntu (because initially it was working)… with the same problem. If I boot on Windows (dual-boot) I have no problem (so it's not physical). If anyone could help :) My laptop is a HP dv6-6165sf. The sound card is a "IDT 92HD81B1X5" (with BeatsAudio). Thanks a lot ! New tests - july 6th Hi again, I've tried editing /etc/pulse/default.pa with these three settings : load-module module-udev-detect use_ucm=0 tsched=0 load-module module-udev-detect tsched=0 load-module module-udev-detect use_ucm=0 The three of them don't change anything, except the last one (which was by default) which makes Audacity record without any crackling sound. But in Skype, Cheese and Kazam, the sound is crackling… I've installed again Ubuntu 13.04 (from scratch, deleting everything from /home), and I've updated it. The microphone is still cracking. Thanks for your help !

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >