Search Results

Search found 28439 results on 1138 pages for 'wingman20 10'.

Page 3/1138 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

  - by mejpark

  Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

  Read the article

• Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

  - by mejpark

  I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

  Read the article

• Linux e1000e (Intel networking driver) problems galore, where do I start?

  - by Evan Carroll

  I'm currently having a major problem with e1000e (not working at all) in Ubuntu Maverick (1.0.2-k4), after resume I'm getting a lot of stuff in dmesg: [ 9085.820197] e1000e 0000:02:00.0: PCI INT A disabled [ 9089.907756] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 9089.907762] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 9089.907797] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9089.907827] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9089.907857] e1000e 0000:02:00.0: setting latency timer to 64 [ 9089.908529] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9089.908922] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9089.908954] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9090.024625] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9090.024630] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9090.024712] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 9090.109492] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9090.164219] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X and, a bunch of [ 2128.005447] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 2128.005452] TDH <89> [ 2128.005454] TDT <27> [ 2128.005456] next_to_use <27> [ 2128.005458] next_to_clean <88> [ 2128.005460] buffer_info[next_to_clean]: [ 2128.005463] time_stamp <6e608> [ 2128.005465] next_to_watch <8a> [ 2128.005467] jiffies <6f929> [ 2128.005469] next_to_watch.status <0> [ 2128.005471] MAC Status <80080703> [ 2128.005473] PHY Status <796d> [ 2128.005475] PHY 1000BASE-T Status <4000> [ 2128.005477] PHY Extended Status <3000> [ 2128.005480] PCI Status <10> I decided to compile the latest stable e1000e to 1.2.17, now I'm getting: [ 9895.678050] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI [ 9895.678055] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9895.678098] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9895.678129] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9895.678162] e1000e 0000:02:00.0: setting latency timer to 64 [ 9895.679136] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.679160] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9895.679192] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9895.791758] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9895.791766] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9895.791850] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9895.892464] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.948175] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.949111] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9895.954694] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9895.954703] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9895.955157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9906.832056] eth0: no IPv6 routers present With 1.2.20 I get: [ 9711.525465] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI [ 9711.525472] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9711.525521] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9711.525554] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9711.525586] e1000e 0000:02:00.0: setting latency timer to 64 [ 9711.526460] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9711.526487] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9711.526523] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9711.639763] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9711.639771] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9711.639854] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9712.060770] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.116195] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.117098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9712.122684] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9712.122693] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9712.123142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9722.920014] eth0: no IPv6 routers present But, I'm still getting these [ 9982.992851] PCI Status <10> [ 9984.993602] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 9984.993606] TDH <5d> [ 9984.993608] TDT <6b> [ 9984.993611] next_to_use <6b> [ 9984.993613] next_to_clean <5b> [ 9984.993615] buffer_info[next_to_clean]: [ 9984.993617] time_stamp <24da80> [ 9984.993619] next_to_watch <5d> [ 9984.993621] jiffies <24f200> [ 9984.993624] next_to_watch.status <0> [ 9984.993626] MAC Status <80080703> [ 9984.993628] PHY Status <796d> [ 9984.993630] PHY 1000BASE-T Status <4000> [ 9984.993632] PHY Extended Status <3000> [ 9984.993635] PCI Status <10> [ 9986.001047] e1000e 0000:02:00.0: eth0: Reset adapter [ 9986.176202] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9986.176211] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO I'm not sure where to start troubleshooting this. Any ideas? Here is the result of ethtool -d eth0 MAC Registers ------------- 0x00000: CTRL (Device control register) 0x18100248 Endian mode (buffers): little Link reset: reset Set link up: 1 Invert Loss-Of-Signal: no Receive flow control: enabled Transmit flow control: enabled VLAN mode: disabled Auto speed detect: disabled Speed select: 1000Mb/s Force speed: no Force duplex: no 0x00008: STATUS (Device status register) 0x80080703 Duplex: full Link up: link config TBI mode: disabled Link speed: 10Mb/s Bus type: PCI Express Port number: 0 0x00100: RCTL (Receive control register) 0x04048002 Receiver: enabled Store bad packets: disabled Unicast promiscuous: disabled Multicast promiscuous: disabled Long packet: disabled Descriptor minimum threshold size: 1/2 Broadcast accept mode: accept VLAN filter: enabled Canonical form indicator: disabled Discard pause frames: filtered Pass MAC control frames: don't pass Receive buffer size: 2048 0x02808: RDLEN (Receive desc length) 0x00001000 0x02810: RDH (Receive desc head) 0x00000001 0x02818: RDT (Receive desc tail) 0x000000F0 0x02820: RDTR (Receive delay timer) 0x00000000 0x00400: TCTL (Transmit ctrl register) 0x3103F0FA Transmitter: enabled Pad short packets: enabled Software XOFF Transmission: disabled Re-transmit on late collision: enabled 0x03808: TDLEN (Transmit desc length) 0x00001000 0x03810: TDH (Transmit desc head) 0x00000000 0x03818: TDT (Transmit desc tail) 0x00000000 0x03820: TIDV (Transmit delay timer) 0x00000008 PHY type: IGP2 and ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 3 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 Here is also the lspci -vvv for this controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Lenovo ThinkPad X60s Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 415a Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-0a-e4-ff-ff-3e-ce-74 Kernel driver in use: e1000e Kernel modules: e1000e I filed a bug on this upstream, still no idea how to get more useful information. Here is a the result of the running that script EEPROM FIX UPDATE $ sudo bash fixeep-82573-dspd.sh eth0 eth0: is a "82573L Gigabit Ethernet Controller" This fixup is applicable to your hardware Your eeprom is up to date, no changes were made Do I still need to do anything? Also here is my EEPROM dump $ sudo ethtool -e eth0 Offset Values ------ ------ 0x0000 00 0a e4 3e ce 74 30 0b b2 ff 51 00 ff ff ff ff 0x0010 53 00 03 02 6b 02 7e 20 aa 17 9a 10 86 80 df 80 0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27 0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f 0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff 0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00 0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff 0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4a e0 I'd also like to note that I used eth0 every day for years and until recently never had an issue.

  Read the article

• Plesk 10 Postfix with multiple IP adresses and SSL certificates

  - by JulianB

  We are currently running a root server with Debian 6 and Plesk 10.4.4. We have some virtual hosts using one IP adress (shared) - e.g. example1.com - and another virtual host using a dedicated IP address (example2.com). Is there a way to configure postfix to do the following Always use the IP address of the virtual host to which the e-mail account belongs (so that an e-mail from [email protected] will originate from the shared IP-Address and an e-mail from [email protected] will originate from the dedicated IP? Use different certificates for TLS for example1.com and example2.com? If the latter is not possible: Could any problems arrive when using example1.com as certificate for example2.com users? Of course, example2.com users would have to configure their clients to use example1.com as the SMTP server name to avoid annoying security warnings. But if we still would be able to get the effect of the first point that would still be acceptable.

  Read the article

• Windows 8 - IE 10 Metro - How to print or save a webpage

  - by AbhishekGirish

  I'm running Windows 8 Pro. My default browser is Internet Explorer 10 (and hence opens as a Modern Windows 8 app). I want to know how to print or save a webpage. There are no related settings available in the browser. The only option is to select "View on Desktop" and the browser interface familiar to IE 9 opens up on the desktop, through which I could access the above said options and additional settings. I know the Desktop is not going away anytime soon and that its still an important part of Windows. But if Microsoft is pitching for the Modern Windows UI, why would they leave out important options such as print & save from it and force a user to access the "old" Desktop mode for the same? Even Windows 8 RT supports plug-and-play access to Printers & Peripherals. So not being able to Print from a tablet or access the File System is definitely not an answer.

  Read the article

• Touch Screen Ubuntu 10.04LTS

  - by WalterJ89

  I'm trying to get a touch screen working with Ubuntu 10.04LTS (64bit) -it is a serial touchsceen, connected at /dev/ttyS0 ,i know that works because I get garbage in the terminal when I enable it. -before the screen used a 3m driver (I believe) in XP. My knowledge of Linux is passive so I generally pick up something when I need it. To get this working I came accross a lot of tutorials (a lot outdated a bit), I'm still at a loss to get this work. I'm not sure where to put linux drivers (/usr/ or /dev/?) most tutorials kind of skip over that part. I have tried editing the /etc/X11/xorg.conf unsuccessfully. I'm not sure what the syntax for that is supposed to be. Thank You

  Read the article

• Disable spell checking in Internet Explorer 10 (Windows 8)

  - by Lumi

  I installed the release preview of Windows 8, which comes with Internet Explorer 10. IE10 has been endowed with a spell checking Feature, which is active while I write this text. As a matter of principle, I disable spell checking anywhere I go. I simply hate spell checking. I know better than the spell checker. (And when not it doesn't matter.) This is all the more annoying as I write in several languages and the spell checker only does one language (German, in this case), and then even in the new and wrong spelling, not in the old an true one. How can I disable this?

  Read the article

• Domain pointing to wrong subscription in Plesk 10

  - by Michal Gow

  I recently moved a domain name in the Plesk 10 control panel from one subscription to another. DNS is managed by another server so there is no change in DNS at all. The IP address is shared and remains the same so there is really no need for a DNS change. But the domain is still managed by its former subscription (where it should have been removed from) and is pointing to exactly the same folder as in the past, even when is not in the list of domains there. Subsequently, the new subscription do not have the domain under its control. Even this domain is in list of domains here and points to another folder.

  Read the article

• How can you print 1 to 10 & 10 to 1 by using recursion with single variable

  - by ccc

  I am preparing for my interview tomorrow -- I need the answer to this question: How can you print 1 to 10 & 10 to 1 by using recursion with single variable

  Read the article

• Error after updating to Mac OS X from version 10.6.5 to 10.6.6

  - by PARTH

  Hi Guys, I am getting an error as shown in the screenshot. This started happening after I updated my Mac OS X from 10.6.5 to 10.6.6. Problem is that Finder stops working 5 mins after the restart and all the other aplications including Xcode 3.2.5, iPhone simulator, safari,etc stop working. Everytime I have to restart the Mac. What could be a permanent fix for this? Please Help and Suggest Thanks

  Read the article

• sorry, the maximum allowed clients from your host (10) are already connected" FTP error

  - by Sejanus

  Hello, I keep getting the "sorry, the maximum allowed clients from your host (10) are already connected" error whenever I try to transfer a large number of files. At first I thought it's a filezilla bug, however I get the same error basically with every FTP client I've tried, including Total Commander under Wine. I do not get that error using Windows. I did try to limit maximum allowed connections for Filezilla, both in server settings and in global settings, it didnt change anything. I did try to switch between passive and active modes (not sure if it's related at all, just last desperate attempt), and it didnt change anything either. When I try to use native ftp client (not sure how is it called, the one in Places - Connect to a server) I get abstract "connection refused" error every time I transfer large number of files. Connection is refused for separate particular files, if I click "Ignore" each time the rest of files are transfered perfectly well, so I assume it's the very same error. Anything I could do? This really drives me mad, transfering large numbers of files is a part of my everyday job... P.S. and this happens with many different FTP servers. Also I dont get this error in Windows. So I assume it's not a server problem. P.P.S. I am aware of similar question here, the answer provided just didn't solve it to me.

  Read the article

• "cannot receive new filesystem stream: invalid backup stream" error when unpacking flash archive on solaris 10

  - by Bovril

  I've searched around but i'm having no luck with some peculiar behavior with a flash archive. I'm using HP Server Automation 9.14 to deploy the OS. I'm creating a Solaris 10 flash archive to create a snapshot default build in our environment. I create the flash archive with # flar create -c -S -n g8-solaris10-u10 g8-solaris10-u10.flar It seems to create the file without any problems (exit status 0). When deploying to a new system (same hardware), it extracts to a point and then bails. The last error in the log I can see is Extracted 2047.00 MB ( 82% of 2488.98 MB archive) ERROR: Could not read file (172.27.118.100:/media/opsware/sunos/flar/g8-solaris10-u10.flar ERROR: Errors occurred during the extraction of flash archive. The file /tmp/flash_errors contains the list of errors encountered ERROR: Could not extract Flash archive ERROR: Flash installation failed The error log contained the following message cannot receive new filesystem stream: invalid backup stream A previous version of this flash archive (1.8gb) worked ok, so I suspect size may be a factor. The source system (the one the flash archive is an image of) is an HP BL460C GEN8 some more info below. OS version Info # uname -a SunOS testhostname 5.10 Generic_147441-01 i86pc i386 i86pc # who -r . run-level 3 Oct 15 08:15 3 0 S disks # echo | format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t0d0 <DEFAULT cyl 17841 alt 2 hd 255 sec 63> /pci@0,0/pci8086,3c06@2,2/pci103c,3355@0/sd@0,0 Specify disk (enter its number): Specify disk (enter its number): zpools # zpool list NAME SIZE ALLOC FREE CAP HEALTH ALTROOT rpool 136G 24.6G 111G 18% ONLINE - Zones # zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / native shared The file size of 2047 seems suspiciously close to 2048, which is concerning. Any help would be greatly appreciated. Thanks

  Read the article

• Solaris 10: How to image a machine?

  - by nonot1

  I've got a Solaris 10 workstation that I'd like to create a full image backup from. The machine has 2 drives, one UFS for system root, and 1 ZFS for data storage. I intend to add a third HD to keep the backup images of both primary drives (including any zfs snapshots). The purpose is not disaster recovery, but rather to allow me to easily blow away a series of application installation/configuration changes I intend to try. What's the best way to do this? I'm not too familiar with Solaris, but have some basic Linux knowledge. I looked at CloneZilla, but it does not support Solaris. I'm OK with just a dd | gzip > image style solution, but I'd need some way to first zero-out the non-used blocks on the primary drives to aid gzip. They are are much larger than my 3rd drive, but hardly have any real data. Update to clarify: I specifically want to avoid using any file-system snapshot functionality, because part of the app configuration changes involve/depend slightly on existing and new snapshots. Ideally the full collection of snapshots should be part of the backup. Virtualization not an option, because the goal is to do performance evaluation on a very specific HW configuration. For the same reason, the spurious "back up" snapshots could skew performance data. Thank you

  Read the article

• Removing resource limits on Solaris 10

  - by mikeydonkey

  How should one remove all potential artificial resource limitations for a process? I just saw a case where a server application consumed resources so that some limitation was hit. The other shells into the same server etc were all extremely slow (waiting for something to free up for them; ie. prstat starting 5 minutes). It wasn't CPU/memory related problem so I think it has got something to do with ulimits / projects. Already managed to set the maximum open files to 500 000 and it helped a little bit. However there is something else and I can not figure out what resource is maxed out. I can get some in-house administrator probably to check this but I would like to understand how I could make sure there shouldn't be any limitations! If you think I am going the wrong way (would be better to figure out what limitation should be specfically tuned etc) please feel free to point me to the correct way. I know technical stuff - it's just Solaris 10 that is giving me headache :/

  Read the article

• Automating silent software deployments on Solaris 10

  - by datSilencer

  Hello everyone. Essentially, the question I'd like to ask is related to the automation of software package deployments on Solaris 10. Specifically, I have a set of software components in tar files that run as daemon processes after being extracted and configured in the host environment. Pretty much like any server side software package out there, I need to ensure that a list of prerequisites are met before extracting and running the software. For example: Checking that certain users exists, and they are associated with one or many user groups. If not, then create them and their group associations. Checking that target application folders exist and if not, then create them with preconfigured path values defined when the package was assembled. Checking that such folders have the appropriate access control level and ownership for a certain user. If not, then set them. Checking that a set of environment variables are defined in /etc/profile, pointed to predefined path locations, added to the general $PATH environment variable, and finally exported into the user's environment. Other files include /etc/services and /etc/system. Obviously, doing this for many boxes (the goal in question) by hand can be slow and error prone. I believe a better alternative is to somehow automate this process. So far I have thought about the following options, and discarded them for one reason or another. 1) Traditional shell scripts. I've only troubleshooted these before, and I don't really have much experience with them. These would be my last resort. 2) Python scripts using the pexpect library for analyzing system command output. This was my initial choice since the target Solaris environments have it installed. However, I want to make sure that I'm not reinveting the wheel again :P. 3) Ant or Gradle scripts. They may be an option since the boxes also have java 1.5 enabled, and the fileset abstractions can be very useful. However, they may fall short when dealing with user and folder permissions checking/setting. It seems obvious to me that I'm not the first person in this situation, but I don't seem to find a utility framework geared towards this purpose. Please let me know if there's a better way to accomplish this. I thank you for your time and help.

  Read the article

• CodePlex Daily Summary for Tuesday, May 20, 2014

  CodePlex Daily Summary for Tuesday, May 20, 2014Popular ReleasesEdiFabric: Release 3.1: Fixed parse tree generation for the latest validation schemasCompare .NET Objects: Version 2.03.0.0: Support for System.Drawing.Font type New Option to Ignore Unknown Object TypesQuickMon: Version 3.11: This release adds some major changes to the core monitoring engine. 1. Polling overrides: Each collector entry can specify a minimum time updating is allowed for it and dependent collector entries. 2. Polling frequency sliding: Additional to polling overrides a collector entry can specify 'sliding' polling frequency if the state remains the same. This means the frequency slows down reducing overhead of polling on a stagnant resource. 3. The monitor pack has an overriding frequency. If used...Family Tree Analyzer: Version 3.7.2.3-beta2: Small beta test to determine issue with Lost Cousins facts with census with no country.AST - a tool for exploring windows kernel: Ast-0.2.20140519-win8.1x86: symbol form, supports any symbol query like dt/x command in windbg symbol form, supports loading pdb file pe form, visualizer of pe info (dos/optional header, sections, directories, import/export table)Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.Endomondo Export: First Release: This is the first release, it might be buggy, so I'll eventually try to improve it over time. I did it quick and dirty as I didn't have much spare time to develop it, but again it works for me. ;-) If I see people use it and there are reasonable requests I might add more stuff to it. Hope you guys like it!FileTable Services for Lightswitch: FileTable Services for Lightswitch 1.0.0: 19 MAY 2014 v.1.0.0 Initial releaseWordMat: WordMat v. 1.06: Check WordMat.blogspot.com for a complete description of new features.Visual F# Tools: Daily Builds Preview 05-16-2014: This preview is released for use under a proprietary license.Wsus Package Publisher: Release v1.3.1405.17: Add Russian translation (thanks to VSharmanov) Fix a bug that make WPP to crash if the user click on "Connect/Reload" while the Report Tab is loading. Enhance the way WPP store the password for remote computers command.MoreTerra (Terraria World Viewer): More Terra 1.12.9: =========== = Compatibility = =========== Updated to account for new format 1.2.4.1 =========== = Issues = =========== all items have not been added. Some colors for new tiles may be off. I wanted to get this out so people have a usable program.LINQ to Twitter: LINQ to Twitter v3.0.3: Supports .NET 4.5x, Windows Phone 8.x, Windows 8.x, Windows Azure, Xamarin.Android, and Xamarin.iOS. New features include Status/Lookup, Mute APIs, and bug fixes. 100% Twitter API v1.1 coverage, Async, Portable Class Library (PCL).ConEmu - Windows console with tabs: ConEmu 140519 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.26.0: Added access to the Release Notes during 'Check for Updates...'' Debug panels Added support for generic types members Members are grouped into 'Raw View' and 'Non-Public members' categories Implemented dedicated (array-like) view for Lists and Dictionaries http://download-codeplex.sec.s-msft.com/Download?ProjectName=csscriptnpp&DownloadId=846498ClosedXML - The easy way to OpenXML: ClosedXML 0.70.0: A lot of fixes. See history.SFDL.NET: SFDL.NET (2.2.9.2): Changelog: Neues Icon Xup.in CnL Plugin BugfixSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...Better Robocopy GUI: Command Line GUI for Robocopy: Better Robocopy GUI had become the primary plugin in Command Line GUI built on .NET 4TFS Planning and Disaster Recovery Avoidance Guide: v1.4.BETA - TFS, DR and Azure IaaS Planning Guides: Welcome to the TFS Planning and DR Avoidance Guidance What is new? A new crisper, more compact style, which is easier to consume on multiple devices without sacrificing any content. Also included are the new TFS on Azure IaaS guide and supplementary guides. Note Capacity planning workbook and posters are included in the Everything Zip package. Quality-Bar Detail Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review ...New ProjectsBizTalk Port Info Query Tool: This tool is capable of retrieving BizTalk send and receive port information, through which can be searched.C5_StyleCopped: The C5 project while an excellent set of collections suffers from being very non StyleCop compliant.Channel 9 RSS Reader (Universal / WinPhone 8): Channel 9 RSS Reader Code Share Sample- A simple RSS reader app for the Channel 9 RSS feed sharing code across 3 apps.CRM Web API Yelp Example: Sample Visual Studio 2013 project that provides an example of how you could use Web API and Microsoft Azure to integrate with Yelp.ERP Accounting System: ERP Accounting SystemEssIL: Essential classes written in CIL.FileTable Services for Lightswitch: Integrates SQL Server 2012 and later FileTable functionality with Lightswitch rapid application development tools. Works with ALL types of Lightswitch clients.freeasyDMS: A free and easy to use DMS for everyone. Without any cloud restrictions. All information about added Documents are stored lokaly at XML files.FreelancerCreateReport: Freelancer_CreateReportInstituto Superior de Ciencias Comerciales: esta es una pruebaMVC Blogger: Under TestingMVC Bootstrap Timepicker: ASP.NET MVC html helper for Bootstrap 3 time picker. This helper makes it easy to use a time picker with the bootstrap look 'n feel in your web site.NextGen: NextGen FrameworkPlato 2D Framework: Plato Windows Runtime App canvas oriented MVVM framework.Promotion Planner Pro: Trade Promotion Management and Analytic suitSharePoint Managed Metadata List Filter: This managed metadata list filter webpart provides the ability to filter multiple list view webparts that contain the same Managed metadata site column on the sSurfwave: A Windows Store (Windows Runtime) library that provides multi-touch tracking and normalized interpretation capabilities.Torrent Description Generator: A simple WPF application to generate a robust torrent description for movies in text or bbcode. Includes file info, thumbs, imdb/RT links and poster.Trang's Project: Qu?n lý thông tin khách hàng trong ho?t d?ng vay v?nWebSniffer: A bot written in C# to play a hangman game and intelligently make decisions about what to pick next.WorldBankBBS: BBS Package designed for use with ASCII, ANSI and PETSCII (Commodore) users. All resources are shared between differing clients. WPF Password Generator with Prism 5 and Moq (2014): This is a WPF reference implementation for developing an MVVM application that uses Prism (5) and Moq.????-????【??】????????: ??????????????,??????????????????,?????????????。?????????,????????????。 ?????-?????【??】?????????: ?????????????????,????,????,?????????.?????,?????!?????,?????????、??、??! ??????-??????【??】??????????: ????????????,???????,??????。??????????,????,????,?????,????????????。 ??????-??????【??】??????????: ???????????????、???????,?????????,???????????????。?????????????,???????。 ??????-??????【??】??????????: ?????????????????,???????????????????????????,????:????,????,????,?????。 ??????-??????【??】??????????: ????????????????,?????????????? ??。??????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ??????????????????,???、???!???????,????????????????,????????????,???! ??????-??????【??】??????????: ???????????????,????,???????、???????????,???????????,????,?????,???????。 ??????-??????【??】??????????: ????????????????????????,?????????,??????????,????????,?????! ??????-??????【??】??????????: ?????????????,????????,??????????????,?????????,????,????,??????。 ??????-??????【??】??????????: ??????????????、?????????,?????????,????,????????,????????????????! ??????-??????【??】??????????: ?????????????:??????、????、????、????、????、??????、??????，???????! ??????-??????【??】??????????: ????????????????、?????,????????????????????,????,????,??????。 ??????-??????【??】??????????: ????????????????，???????、???????????，????????、????、????、??????、????????。 ??????-??????【??】??????????: ???????????????????????????,???????????????????????,???????。 ??????-??????【??】??????????: ???????????????、????、????、??????、????、???????,?????,?????????! ??????-??????【??】??????????: ??????????????????、????、??????、????????,????????????,???????????！ ??????-??????【??】??????????: ????????????????????,?????????????????????,?????,????,???????. ??????-??????【??】??????????: ???????????????、???????,?????????,???????????????,?????????????。 ??????-??????【??】??????????: ????????????、??、???????????,??????,????????,??????????????????...????。 ??????-??????【??】??????????: ????????????????，?????????/?,,???????????,??????????????! ??????-??????【??】??????????: ??????????,????????????????????????,???????????????,?????????????！ ??????-??????【??】??????????: ??????????,????????,?????,???,???????????,???????????,?????,??????！ ??????-??????【??】??????????: ???????????????????????????、??????????????,??????????????。 ??????-??????【??】??????????: ?????????????????"????,????"???,????????????????????????,??????????????。 ??????-??????【??】??????????: ?????????????????,????:????,????,????,??????,?????,???????????????! ??????-??????【??】??????????: ??????????????????????????,???????????,????????,?????????????????????。 ??????-??????【??】??????????: ???????????、????、????、??????、????、????????,????????、?????????,?????。 ??????-??????【??】??????????: ?????????????????,?????????????。????????????,???????,???????,?????,?????。 ??????-??????【??】??????????: ????????????????,?????????、??、??、????,??????????,?????????????！ ??????-??????【??】??????????: ???????????、????、????、??????????,???,?????,???????????????. ??????-??????【??】??????????: ??????????????????????,?????, ... ????????????,????,????,?????,???????。 ??????-??????【??】??????????: ????????????????????????、??????,????、?????、????， ?????????，?????????????！ ??????-??????【??】??????????: ????????,??????,?????????????????????,???????????????????????。 ??????-??????【??】??????????: ?????????????????????、????、????、??????、???????,??????、??????。 ??????-??????【??】??????????: ???????【.????.????.????.????.】??【??】:、??、??、??、??、??、??、??、??、??、??、?????。 ??????-??????【??】??????????: ??????????????????,????,??.??.??.??.??.??.??.???，????，???????! ??????-??????【??】??????????: ????????????????????、????????、????????、????????、???????,????????????。 ??????-??????【??】??????????: ????????????????????,?????,???????,???????????,??????! ??????-??????【??】??????????: ???????????、??????、????、?????、?????!????,????????????????!????。 ??????-??????【??】??????????: ??????,??,????????。 ... ??????????????????、??????????????????... ???????-???????【??】???????????: ???????????????????????????,???????????????,????????????????！ ???????-???????【??】???????????: ???????????????:????,????,????,???????,????????,??????:????????,?????! ???????-???????【??】???????????: ???????,?????????,?????????????。?????????????,?????????,???????。 ??????-??????【??】??????????: ????????????????,???????、???????????,????????,????,?????????,??????,??????! ??????-??????【??】??????????: ?????????????????,????????????,?????????????????,??????,????????! ??????-??????【??】??????????: ??????????????????,???????、????、????、??????、???????,??????,???????????。 ??????-??????【??】??????????: ?????????????,??,??,??,??? ?,??,,??,??,??,??,??,??,????????,??????！ ??????-??????【??】??????????: ????????????????????????????:???????,??????,????,????,????,?????！ ??????-??????【??】??????????: ???????????????????,????,????,????,???????,?????,?????.??????。 ??????-??????【??】??????????: ????????????????????,?????????????,???????????.????????????,????????????! ??????-??????【??】??????????: ??????????????????,??:??????,????,????,????,?????,??????????????. ??????-??????【??】??????????: ?????????????????,???????????????。?????????????,???????,?????????。 ??????-??????【??】??????????: ?????????????,????(??)????????，??????，????，???，????，???????! ??????-??????【??】??????????: ??????????????,?????????????,?????????????,??????,????,????,??????????！ ??????-??????【??】??????????: ????????????????,????????,????:???????,??????,????,????,?????,?????,??????! ??????-??????【??】??????????: ?????????????????????,????,????,??????????。???????????????,??,??,??????????,??????... ??????-??????【??】??????????: ?????????????????,??????????????、???????、???????、???????、?????！ ??????-??????【??】??????????: ???????????,?????????????? ??。????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ????????????、?????、?????、?????、?????、????,???????????,?????,??????！ ??????-??????【??】??????????: ?????????????、?????、?????、????、?????,??????????。????????????????! ??????-??????【??】??????????: ??????????????????,????????????,?????、??、????,?????,??????！ ??????-??????【??】??????????: ?????????????????,???????????????。???????????,??????:????、????、???????！ ??????-??????【??】??????????: ??????????????,?????????????,????,?????????,?????????????,?????,?????! ??????-??????【??】??????????: ??????????????????,???????????,??????????????,??????????，??????????????！

  Read the article

• CodePlex Daily Summary for Saturday, November 10, 2012

  CodePlex Daily Summary for Saturday, November 10, 2012Popular ReleasesImageGlass: Version 1.5: http://i1214.photobucket.com/albums/cc483/phapsuxeko/ImageGlass/1.png v1.5.4401.3015 Thumbnail bar: Increase loading speed Thumbnail image with ratio Support personal customization: mouse up, mouse down, mouse hover, selected item... Scroll to show all items Image viewer Zoom by scroll, or selected rectangle Speed up loading Zoom to cursor point New background design and customization and others... v1.5.4430.483 Thumbnail bar: Auto move scroll bar to selected image Show / Hi...Building Windows 8 Apps with C# and XAML: Full Source Chapters 1 - 10 for Windows 8 Fix 002: This is the full source from all chapters of the book, compiled and tested on Windows 8 RTM. Includes: A fix for the Netflix example from Chapter 6 that was missing a service reference A fix for the ImageHelper issue (images were not being saved) - this was due to the buffer being inadequate and required streaming the writeable bitmap to a buffer first before encoding and savingmyCollections: Version 2.3.2.0: New in this version : Added TheGamesDB.net API for Games and NDS Added Support for Windows Media Center Added Support for myMovies Added Support for XBMC Added Support for Dune HD Added Support for Mede8er Added Support for WD HDTV Added Fast search options Added order by Artist/Album for music You can now create covers and background for games You can now update your ID3 tag with the info of myCollections Fixed several provider Performance improvement New Splash ...Draw: Draw 1.0: Drawing PadPdfReport: PdfReport 1.4: - Added Html Footer Template. - Added a new HeaderTemplate (HtmlHeader) to simplify creating the headers of pages and groups by using HTML. See HtmlHeader/HtmlHeaderPdfReport.cs sample for more info. - Added a new sample (HtmlCellTemplate/HtmlCellTemplatePdfReport.cs) to show how to use the HtmlField template for creating the custom cell templates. - Added transparency setting to DiagonalWatermark. See ProgressReportPdfReport for more info. - Added DynamicCompile/DynamicCompilePdfReport.cs sa...Player Framework by Microsoft: Player Framework for Windows 8 (v1.0): IMPORTANT: List of breaking changes from preview 7 Ability to move control panel or individual elements outside media player. more info... New Entertainment app theme for out of the box support for Windows 8 Entertainment app guidelines. more info... VSIX reference names shortened. Allows seeing plugin name from "Add Reference" dialog without resizing. FreeWheel SmartXML now supports new "Standard" event callback type. Other minor misc fixes and improvements ADDITIONAL DOWNLOADSSmo...WebSearch.Net: WebSearch.Net 3.1: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. It facilitates the experiments of web search researchers due to its high flexibility and extensibility. The platform can be used or extended by any language compatible for .Net 2 framework, from C# (recommended), VB.Net to C++ and Java. Thanks to the large coverage of knowledge in web search research, it is necessary to model the techniques and main...Umbraco CMS: Umbraco 4.10.0: NugetNuGet BlogRead the release blog post for 4.10.0. Whats newMVC support New request pipeline Many, many bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesWe have done all we can not to break backwards compatibility, but we had to do some minor breaking changes: Removed graphicHeadlineFormat config setting from umbracoSettings.config (an old relic from the 3.x days) U4-690 DynamicNode ChildrenAsList was fixed, altering it'...MySQL Tuner for Windows: 0.3: Welcome to the third beta of MySQL Tuner for Windows! This release fixes bugs in the displaying of numbers, and a crash that occurred due to the program incorrectly closing and disposing of resources, Be warned that there will be bugs in this release, so please do not use on production or critical systems. Do post details of issues found to the issue tracker, and I will endeavour to fix them, when I can. I would love to have your feedback, and if possible your support! Requirements Microso...SharePoint Manager 2013: SharePoint Manager 2013 Release ver 1.0.12.1106: SharePoint Manager 2013 Release (ver: 1.0.12.1106) is now ready for SharePoint 2013. The new version has an expanded view of the SharePoint object model and has been tested on SharePoint 2013 RTM. As a bonus, the new version is also available for SharePoint 2010 as a separate download.D3D9Client: D3D9Client R7: New release for Orbiter 2010-P1 - Added horizon/sun angle for night-lights into the configuration file (default 10deg) - Some runway lights related bugs are fixed - Added more configuration options for runway lightsFiskalizacija za developere: FiskalizacijaDev 1.2: Verzija 1.2. je, prije svega, odgovor na novu verziju Tehnicke specifikacije (v1.1.) koja je objavljena prije nekoliko dana. Pored novosti vezanih uz (sitne) izmjene u spomenutoj novoj verziji Tehnicke dokumentacije, projekt smo prošili sa nekim dodatnim feature-ima od kojih je vecina proizašla iz vaših prijedloga - hvala :) Novosti u v1.2. su: - Neusuglašenost zahtjeva (http://fiskalizacija.codeplex.com/workitem/645) - Sample projekt - iznosi se množe sa 100 (http://fiskalizacija.codeplex.c...MFCMAPI: October 2012 Release: Build: 15.0.0.1036 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.3: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.3 For detailed release notes check the release notes. TypeScript supportWrite your code in a ...MCEBuddy 2.x: MCEBuddy 2.3.7: Changelog for 2.3.7 (32bit and 64bit) 1. Improved performance of MP4 Fast and M4V Fast Profiles (no deinterlacing, removed --decomb) 2. Improved priority handling 3. Added support for Pausing and Resume conversions 4. Added support for fallback to source directory if network destination directory is unavailable 5. MCEBuddy now installs ShowAnalyzer during installation 6. Added support for long description atom in iTunesFoxyXLS: FoxyXLS Releases: Source code and samplesWindow Manager: Window Manager 1.0: First releaseProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...New ProjectsAuthor-it Variables Report Plug-in: The Variable Information Plug-in is an Author-it plug-in that displays information about all the variables in a library.bobthebuilder: Bob the builderCalendarSite: This webapplicaton is a calendar and appoinement manager app.ControlIP: This project helps users make the control task in a projectDaily Math Training: Daily Math Training app is Windows 8 app for children.Diablo III: This Project will contain several Diablo III related Implementations (a Windows 8 App another API Implementation, maybe some Calculators...)gelform: Ejercicio UTNJHashWin: Calcular hash MD5 SHA1 SHA256 SHA512 de arquivos MultiTask .NET 4.0 C# Marron TFS: Marron TFSMiddle Tennessee State University Robotics Team: Home of the MTSU Raider Robotics team.myexam: examN2F Router: The Zibings, N2Framework, url mapping/router project.NZBMatrix Advanced Feed Reader: This project is simple filter for NZBMatrix website feeds to update user with new movies which falls into the predefined customizable search templates.OpenTrading: Projeto em VB .net 3.5 que utiliza Active Record para mapeamento do banco de dados diretamente na classe das entidades e NHibernate para persistência dos dadosProjeto Parque - PI: Este projeto é resultado de um trabalho que realizamos todos os semestres na faculdade. 4º BSI - Centro Universitário Senac. QuesSys: this project is about examinationsample of inheritance: this project a sample of inheritance between classes at C#SharePoint 2013 Search Query Tool: Tool to test and debug the Search REST API in SharePoint 2013. Issue GET and POST search and suggestions queries. Use also against SharePoint Online. SharePoint Metro Grid: SharePoint 2010/2013 web part that displays links in Metro Tile Grid format. Just like Windows 8. Includes 215 images in 7 different sizes. Or use your own.SQL Server Partitioned Table Framework: The SQL Server Partitioned Table Framework (PTF) consists of a set of T-SQL Procedures that ease the maintenance work associated with partitioned tables.String -By GigaPlux Inc.: String OS is a operating system that was developed using C# and is based on the cosmos project .It has a beautiful File System by GRUNT.svu cms: first cms with chat and message between user vConsole for Windows 8: Just a very simple little app to help IT folks stuck in vSphere 5.0 with Win 8 console issues until you get to the next version of vSphereWikiprep#: The Wikiprep program is completely written in C# and based on .Net 4.0 . It processes Wikipedia dumps.Windows 8 Lock Screen: Windows 8 Lock Screen is a app that works like the Windows 8 Lock Screenwsccproject: updates will be made in due time during development

  Read the article

• Ubuntu Server and setting up two nic cards

  - by kmalik

  I have ubuntu server on a computer with a wireless and hardwired nic card. The wireless needs to get the internet and pass it to the ubuntu server as well as pass it along to the hardwired nic card to more computers. I am having issues getting the basic set up as I believe the route table is grabbing from the wrong nic card. The router is 192.168.1.0 and the server is set to 192.168.1.11 on the wireless card through DHCP ETH0 (wired nic card) is set up to be 10.10.10.0 and the server is 10.10.10.1) I am not a linux or networking guru but basically I am trying to have internet come from a guest network 192.168.1.0 i believe to give internet to the ubuntu server then the ubuntu server will also A) have the wired nic serve DHCP addresses to other computers via a switch or router (that acts as a switch) via 10.10.10.0 addresses. And I would love if it also passed along internet capabilities as well if possible. Bu really at this point my hope is to at least get the internet working on the server and the DHCP to pass correctly. At the moment the specific issue I am having is getting ubuntu server to connect to the internet and have both nic cards up and running correctly. Any help would be appreciated! The route table is as follows: Destination Gateway GM Flags Metric Iface 0.0.0.0 10.10.10.1 0.0.0.0 UG 100 eth0 10.10.10.0 0.0.0.0 255.255.255.0 U 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 eth0 1992.168.1.0 0.0.0.0 255.255.255.255.0 U 0 eth1 My interfaces is set up as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.1 netmask 255.255.255.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.1 domain-name-servers 192.168.1.0 auto eth1 iface eth1 inet dhcp netmask 255.255.255.0 gateway 192.168.1.0 wpa-driver wext wpa-ssid "ssid_name" wpa-ap-scan 1 wpa-proto wpa wpa-pairwise ccmp wpa-group ccmp wpa-key-mgmt wpa-psk wpa-psk "HASH" My DHCPD.conf (as there is a domain name server on here is as follows): ddns-update-style none default-lease-time 600 max-lease-time 7200 authoritative option domain-name "Kamron's Network" option subnet-mask 255.255.255.0 option broadcast-address 10.10.10.255 option routers 192.168.1.0 option domain-name-server 192.168.1.0 98.223.128.213 ooption subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.99 } log-facility local7

  Read the article

• Interoperability between Weblogic 10.3.1 and Oracle BPM 10.3.1

  - by alfredozn

  Hi, Im migrating an ALBPM 6.5 running on a WLS 10.0 to an Oracle BPM 10.3.1 running on WLS 10.3.1 I got some problems with the Oracle driver because the old driver (weblogic.jdbcx.oracle.OracleDataSource) was definitely removed from the server and is not longer supported. Instead I used the thin driver (oracle.jdbc.xa.OracleXADataSource), the database migration was executed succesfully but after that, when I try to deploy the engine ear in WebLogic I got exceptions asociated to the driver: [ (cont) ] Main: Caused by: weblogic.application.ModuleException: [HTTP:101216]Servlet: "engineStartup" failed to preload on startup in Web application: "/albpmServices/albpm_engine". [ (cont) ] Main: fuego.directory.DirectoryRuntimeException: Exception [java.sql.SQLException: Invalid column type]. [ (cont) ] Main: at fuego.directory.DirectoryRuntimeException.wrapException(DirectoryRuntimeException.java:85) [ (cont) ] Main: at fuego.directory.provider.jdbc.oracle.OraclePersistenceManager.mapSQLException(OraclePersistenceManager.java:145) [ (cont) ] Main: at fuego.directory.provider.jdbc.datadirect.oracle.DataDirectOraclePersistenceManager.mapSQLException(DataDirectOraclePersistenceManager.java:51) [ (cont) ] Main: at fuego.directory.provider.jdbc.JDBCServiceAccessor.mapSQLException(JDBCServiceAccessor.java:78) [ (cont) ] Main: at fuego.directory.provider.jdbc.JDBCObjectPropertiesAccessor.fetchAllDirectoryProperties(JDBCObjectPropertiesAccessor.java:442) [ (cont) ] Main: at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) I was looking around for a solution but all is pointing to use the old driver, I think isn't a good practice to force the server to use this driver after Oracle remove it completely. Any suggestions or similar experiences??

  Read the article

• Solaris 10 branded zone VM Templates for Solaris 11 on OTN

  - by jsavit

  Early this year I wrote the article Ours Goes To 11 which describes the ability to import Solaris 10 systems into a "Solaris 10 branded zone" under Oracle Solaris 11. I did this using Solaris 11 Express, and the capability remains in Solaris 11 with only slight changes. This important tool lets you painlessly inhaling a Solaris Container from Solaris 10 or entire Solaris 10 systems ("the global zone") into virtualized environments on a Solaris 11 OS. Just recently, Oracle provided Oracle VM Templates for Oracle Solaris 10 Zones to let you create Solaris 10 branded zones for Solaris 11 even if you don't currently have access to install media or a running Solaris 10 system. To use this, just download the Oracle VM Template for Oracle Solaris Zone 10 from OTN at http://www.oracle.com/technetwork/server-storage/solaris11/downloads/virtual-machines-1355605.html. This page contains images of Oracle Solaris 10 8/11 (the recent update to Solaris 10) in SPARC and x86 formats suitable for creating branded zones. The same page also has a VirtualBox image you can download for a complete Solaris 10 install in a guest virtual machine you can run on any host OS that supports VirtualBox. Both sets of downloads provide a quick - and extremely easy - way to set up a virtual Solaris 10 environment. In the case of the Oracle VM Templates, they illustrate several advanced features of Solaris 11. To start, just go to the above link, download the template for the hardware platform (SPARC or x86) you want, and download the README file also linked from that page. Install prerequisites The README file tells you to install the prerequisite Solaris 11 package that implements the Solaris 10 brand. Then you can install instances of zones with that brand. # pkg install pkg:/system/zones/brand/brand-solaris10 Packages to install: 1 Create boot environment: No Create backup boot environment: Yes DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 44/44 0.4/0.4 PHASE ACTIONS Install Phase 74/74 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 That took only a few minutes, and didn't require a reboot. Install the Solaris 10 zone Now it's time to run the downloaded template file. First make it executable via the chmod command, of course. I found that (unlike stated in the README) there was no need to rename the downloaded file to remove the .bin. When you run it you provide several parameters to describe the zone configuration: -a IP address - the IP address and optional netmask for the zone. This is the only mandatory parameter. -z zonename - the name of the zone you would like to create. -i interface - the package will create an exclusive-IP zone using a virtual NIC (vnic) based on this physical interface. In my case, I have a NIC called rge0. -p PATH - specifies the path in which you want the zoneroot to be placed. In my case, I have a ZFS dataset mounted at /zones, and this will create a zoneroot at /zones/s10u10. Kicking it off, you will see a copyright message, and then messages showing progress building the zone, which only takes a few minutes. # ./solaris-10u10-x86.bin -p /zones -a 192.168.1.100 -i rge0 -z s10u10 ... ... Checking disk-space for extraction Ok Extracting in /export/home/CDimages/s10zone/bootimage.ihaqvh ... 100% [===============================] Checking data integrity Ok Checking platform compatibility The host and the image do not have the same Solaris release: host Solaris release: 5.11 image Solaris release: 5.10 Will create a Solaris 10 branded zone. Warning: could not find a defaultrouter Zone won't have any defaultrouter configured IMAGE: ./solaris-10u10-x86.bin ZONE: s10u10 ZONEPATH: /zones/s10u10 INTERFACE: rge0 VNIC: vnicZBI13379 MAC ADDR: 2:8:20:5c:1a:cc IP ADDR: 192.168.1.100 NETMASK: 255.255.255.0 DEFROUTER: NONE TIMEZONE: US/Arizona Checking disk-space for installation Ok Installing in /zones/s10u10 ... 100% [===============================] Using a static exclusive-IP Attaching s10u10 Booting s10u10 Waiting for boot to complete booting... booting... booting... Zone s10u10 booted The zone's root password has been set using the root password of the local host. You can change the zone's root password to further harden the security of the zone: being root, log into the zone from the local host with the command 'zlogin s10u10'. Once logged in, change the root password with the command 'passwd'. The nifty part in my opinion (besides being so easy), is that the zone was created as an exclusive-IP zone on a virtual NIC. This network configuration lets you enforce traffic isolation from other zones, enforce network Quality of Service, and even let the zone set its own characteristics like IP address and packet size. Independence of the zone's network characteristics from the global zone is one of the enhancements in Solaris 10 that make it easier to consolidate zones while preserving their autonomy, yet provide control in a consolidated environment. Let's see what the virtual network environment looks like by issuing commands from the Solaris 11 global zone. First I'll use Old School ifconfig, and then I'll use the new ipadm and dladm commands. # ifconfig -a4 lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 rge0: flags=1004943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,DHCP,IPv4> mtu 1500 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:d1:18:ac:bc vboxnet0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3 inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255 ether 8:0:27:f8:62:1c # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE yge0 Ethernet unknown 0 unknown yge0 yge1 Ethernet unknown 0 unknown yge1 rge0 Ethernet up 1000 full rge0 vboxnet0 Ethernet up 1000 full vboxnet0 # dladm show-link LINK CLASS MTU STATE OVER yge0 phys 1500 unknown -- yge1 phys 1500 unknown -- rge0 phys 1500 up -- vboxnet0 phys 1500 up -- vnicZBI13379 vnic 1500 up rge0 s10u10/vnicZBI13379 vnic 1500 up rge0 s10u10/net0 vnic 1500 up rge0 # dladm show-vnic LINK OVER SPEED MACADDRESS MACADDRTYPE VID vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/net0 rge0 1000 2:8:20:9d:d0:79 random 0 # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 rge0/_a dhcp ok 192.168.1.3/24 vboxnet0/_a static ok 192.168.56.1/24 lo0/v6 static ok ::1/128 Log into the zone The install step already booted the zone, so lets log into it. Notice how you have to be appropriately privileged to log into a zone. This is my home system so I'm being a bit cavalier, but in a production environment you can give granular control of who can login to which zones. Voila! a Solaris 10 environment under a Solaris 11 kernel. Notice the output from the uname -a and ifconfig commands, and output from a ping to a nearby host. $ zlogin s10u10 zlogin: You lack sufficient privilege to run this command (all privs required) savit@home:~$ sudo zlogin s10u10 Password: [Connected to zone 's10u10' pts/5] Oracle Corporation SunOS 5.10 Generic Patch January 2005 # uname -a SunOS s10u10 5.10 Generic_Virtual i86pc i386 i86pc # ifconfig -a4 lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc # bash bash-3.2# ifconfig -a lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc bash-3.2# ping 192.168.1.2 192.168.1.2 is alive For fun, I configured Apache (setting its configuration file in /etc/apache2) and brought it up. Easy - took just a few minutes. bash-3.2# svcs apache2 STATE STIME FMRI disabled 12:38:46 svc:/network/http:apache2 bash-3.2# svcadm enable apache2 Summary In just a few minutes, I built a functioning virtual Solaris 10 environment under by Solaris 11 system. It was... easy! While I can still do it the manual way (creating and using a system archive), this is a low-effort way to create a Solaris 10 zone on Solaris 11.

  Read the article

• Ubuntu 10: an error occurred while mounting /mnt/hgfs

  - by Patrick

  hi, I'm emulating Ubuntu using VMWare and I've upgraded it to Maverick version. When I boot the system I get this error (below the Ubuntu logo): "an error occurred while mounting /mnt/hgfs" So I have to click S to continue and the the OS seems to work well. Thanks

  Read the article

• Cannot access Ubuntu 10/04 after reinstalling Windows

  - by meyosef

  I had Windows Vista Home Premium on HP pavilion desktop. I partitioned the disk for Ubuntu and a swap disk partition and then I installed Ubuntu 10.04. When I would start my computer, I would be given a choice to start Windows or Ubuntu. Today I reinstalled Windows, and now the menu has disappeared. I don't see in windows the disk partition that I allocated to Ubuntu, so it means Ubuntu still exist but I can't load it. What can I do ?

  Read the article

• Changes to grub in ubuntu 10

  - by jdege

  I've been running CentOS 5 for some years. I've decided to upgrade to Ubuntu, and with 10.04 just out, this seemed like a good time. I'm a tad paranoid, so I started off with a new set of drives - one to install on, one to backup to, and one as a spare. I removed my existing CentOS 5 drives, and did an install, and had no problems. I installed the server version, and used the default full-disk LVM installation. Next, I copies my backup scripts over, edited them to work with the new configuration, and did a test backup. That worked fine, as well. Then comes the real test, could I do an install of the backup onto the spare drive? (I won't put anything of importance on a system that doesn't have a reliable backup, and if I've never done a restore, it's not reliable.) I booted from a System Rescue CD (ver 1.5.3), with the spare drive as /dev/sda, and the backup drive as /dev/sdb. I had no trouble in partitioning, configuring LVM, formatting, making swap, or restoring the file systems. But when I got to restoring grub to the MBR, I ran into problems. My restore instructions from CentOS 5 said run grub, then enter two commands: root (hd0,0) setup (hd0) The first command exits with an error: "Checking if /boot/grub/stage1 exists ... no" I did some googling around, and found that the Grub2 included in recent Ubuntus is very different than the Grub 0.97 included in CentOS 5. One site suggested I use: grub-install --root-dir=/mnt/restore /dev/sda That appeared to work, but when I booted from the drive, I ended up at a grub prompt. Any ideas as to what I need to do? It seems like a simple problem, but my attempts at searching out answers on the web are being swamped by references to the old version of Grub. Help would be appreciated.

  Read the article

• Configure Ubuntu9.10 to see hardware of my laptop

  - by michael

  I have installed Ubuntu 9.10 on my laptop. But it can't see all the hardware of the laptop. I would like some help. my laptop has 8G (in Windows7), but Ubuntu only see 2.9G (I get this value from System Monitor under Resource tab my laptop can have 1600x900 resolution (it works in Windows7), but i can only set to 1280x800 in Ubunutu my wireless card does not work. But my wired connection works. Can you please help me in configuring my Ubuntu environment?

  Read the article

• CodePlex Daily Summary for Saturday, May 10, 2014

  CodePlex Daily Summary for Saturday, May 10, 2014Popular ReleasesTerraMap (Terraria World Map Viewer): TerraMap 1.0.3.14652: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles The setup file will make sure .NET 4 is installed, install TerraMap, create desktop and start menu shortcuts, add a .wld file association, and launch TerraMap. If you prefer the zip file, make sure you have .NET Framework v4.5 installed, then just download and extract the ZIP file, and run TerraMap.exe.R.NET: R.NET 1.5.12: R.NET 1.5.12 is a beta release towards R.NET 1.6. You are encouraged to use 1.5.12 now and give feedback. See the documentation for setup and usage instructions. Main changes for R.NET 1.5.12: The C stack limit was not disabled on Windows. For reasons possibly peculiar to R, this means that non-concurrent access to R from multiple threads was not stable. This is now fixed, with the fix validated with a unit test. Thanks to Odugen, skyguy94, and previously others (evolvedmicrobe, tomasp) fo...CTI Text Encryption: CTI Text Encryption 5.2: Change log: 5.2 - Remove Cut button. - Fixed Reset All button does not reset encrypted text column. - Switch button location between Copy and Paste. - Enable users to use local fonts to display characters of their language correctly. (A font settings file will be saved at the same folder of this program.) 5.1 - Improve encryption process. - Minor UI update. - Version 5.1 is not compatible with older version. 5.0 - Improve encryption algorithm. - Simply inner non-encryption related mec...SEToolbox: SEToolbox 01.029.006 Release 1: Fix to allow keyboard search on load dialog. (type the first few letters of your save) Fixed check for new release. Changed the way ship details are loaded to alleviate load time for worlds with very large ships (100,000+ blocks). Fixed Image importer, was incorrectly listing 'Asteroid' as import option. Minor changes to menus (text and appearance) for clarity and OS consistency. Added in reading of world palette for color dialog editor. WIP on subsystem editor. Can now multiselec...Media Companion: Media Companion MC3.597b: Thank you for being patient, againThere are a number of fixes in place with this release. and some new features added. Most are self explanatory, so check out the options in Preferences. Couple of new Features:* Movie - Allow save Title and Sort Title in Title Case format. * Movie - Allow save fanart.jpg if movie in folder. * TV - display episode source. Get episode source from episode filename. Fixed:* Movie - Added Fill Tags from plot keywords to Batch Rescraper. * Movie - Fixed TMDB s...SimCityPak: SimCityPak 0.3.0.0: Contains several bugfixes, newly identified properties and some UI improvements. Main new features UI overhaul for the main index list: Icons for each different index, including icons for different property files Tooltips for all relevant fields Removed clutter Identified hundreds of additional properties (thanks to MaxisGuillaume) - this should make modding gameplay easierSeal Report: Seal Report 1.4: New Features: Report Designer: New option to convert a Report Source into a Repository Source. Report Designer: New contextual helper menus to select, remove, copy, prompt elements in a model. Web Server: New option to expand sub-folders displayed in the tree view. Web Server: Web Folder Description File can be a .cshtml file to display a MVC View. Views: additional CSS parameters for some DIVs. NVD3 Chart: Some default configuration values have been changed. Issues Addressed:16 ...Magick.NET: Magick.NET 6.8.9.002: Magick.NET linked with ImageMagick 6.8.9.0.VidCoder: 1.5.22 Beta: Added ability to burn SRT subtitles. Updated to HandBrake SVN 6169. Added checks to prevent VidCoder from running with a database version newer than it expects. Tooltips in the Advanced Video panel now trigger on the field labels as well as the fields themselves. Fixed updating preset/profile/tune/level settings on changing video encoder. This should resolve some problems with QSV encoding. Fixed tunes and profiles getting set to blank when switching between x264 and x265. Fixed co...NuGet: NuGet 2.8.2: We will be releasing a 2.8.2 version of our own NuGet packages and the NuGet.exe command-line tool. The 2.8.2 release will not include updated VS or WebMatrix extensions. NuGet.Server.Extensions.dll needs to be used alongside NuGet-Signed.exe to provide the NuGet.exe mirror functionality.DNN CMS Platform: 07.03.00 BETA (Not For Production Use): DNN 7.3 release is focused on performance and we have made a variety of changes to improve the run-time characteristics of the platform. End users will notice faster page response time and administrators will appreciate a more responsive user experience, especially on larger scale web sites. This is a BETA release and is NOT recommended for production use. There is no upgrade path offered from this release to the final DNN 7.3 release. Known Issues - The Telerik RAD Controls for ASP.NET AJA...SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 2.0.2: SmartStore.NET 2.0.2 is primarily a maintenance release for version 2.0.0, which has been released on April 04 2014. It contains several improvements & important fixes. BugfixesIMPORTANT FIX: Memory leak leads to OutOfMemoryException in application after a while Installation fix: some varchar(MAX) columns get created as varchar(4000). Added a migration to fix the column specs. Installation fix: Setup fails with exception Value cannot be null. Parameter name: stream Bugfix for stock iss...Channel9's Absolute Beginner Series: Windows Phone 8.1: Entire source code for Windows Phone 8.1 Absolute Beginner Series.BIDS Helper: BIDS Helper 1.6.6: This BIDS Helper beta release brings support for SQL Server 2014 and SSDTBI for Visual Studio 2013. (Note that SSDTBI for Visual Studio 2013 is currently unavailable to download from Microsoft. We are releasing BIDS Helper support to help those who downloaded it before it became unavailable, and we will recheck BIDS Helper 2014 is compatible after SSDTBI becomes available to download again.) BIDS Helper 2014 Beta Limitations: SQL Server 2014 support for Biml is still in progress, so this bet...Windows Phone IsoStoreSpy (a cool WP8.1 + WP8 Isolated Storage Explorer): IsoStoreSpy WP8.1 3.0.0.0 (Win8 only): 3.0.0.0 + WP8.1 & WP8 device allowed + Local, Roaming or Temp directory Selector for WindowsRuntime apps + Version number in the title :)CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.24.0: ShortcutMapping panel now allows direct modification of the shortcuts. Custom updater dropped support for MSI installation but it still allows downloading of MSI http://www.csscript.net/npp/codeplex/non_msi_update.pngProDinner - ASP.NET MVC Sample (EF5, N-Tier, jQuery): 8.2: upgrade to mvc 5 upgrade to ASP.net MVC Awesome 4.0, EF 6.1, latest jcrop, Windsor Castle etc. ability to show/hide the dog using tinymce for the feedback page mobile friendly uiASP.net MVC Awesome - jQuery Ajax Helpers: 4.0: version 4.0 ========================== - added InitPopup, InitPopupForm helpers, open initialized popups using awe.open(name, params) - added Tag or Tags for all helpers, usable in mod code - added popup aweclose, aweresize events - popups have api accessible via .data('api'), with methods open, close and destroy - all popups have .awe-popup class - popups can be grouped using .Group(string), only 1 popup in the same group can exist at the same time - added awebeginload event for...ScreenToGif: Release 1.0: What's new: • Small UI tweaks everywhere. • You can add Text, Subtitles and Title Frames. • Processing the gif now takes less time. • Languages: Spanish, Italian and Tamil added. • Single .exe multi language. • Takes less time to apply blur and pixelated efect. • Restart button. • Language picker. (If the user wants to select a diferent language than the system's) • "Encoding Finished" page with a link to open the file. • GreenScreen unchanged pixels to save kilobytes. • "Check for Updates" t...Touchmote: Touchmote 1.0 beta 11: Changes Support for multiple monitor setup Additional settings for analog sticks More reliable pairing Bug fixes and improvementsNew ProjectsADO: copy rightAntilop: Antilop is a professionnal C# business and data access framework.Bit Consulting Business Information Technology Blog: Espacio creado para todos los interesados en intercambiar información, opinar, preguntar todo lo relacionado con los productos ofrecidos por BIT CONSULTING.Black Desert C# emulator(Necroz Project): Development Black Desert emulatorDSLK: bai tap ctdl&gtFreelancerWebSecurity: FreelancerWebSecurityGlobal Machine Access: The project provides an intuitive interface computer control via the command line window. Features: - Login, logout, change password. - Execute commands inHeadTS: An alternative to the HeadJS script loader that provides a more focused, robust, promise-based script management system.How to develop an autodialer / predictive dialer in C#: This project demonstrates how to build a VoIP autodialer in C# in order to be able to make a huge amount of simultaneous calls automatically.html5demo: demo web app.NetPipe: A new piece of software in python that will allow programs to be executed on other computers / servers over a network.Observer Pattern: This project shows how the observer design pattern works.Our wedding: Ruben y Sarahi wedding 19-09-2014SpreadsheetComputations: Good stuffSpurnUI: jQuery based professional ASP.NET Controls for moblieStrategy Pattern: This project shows how the strategy design pattern works.TagIt-MP3: TagIt-MP3 is a free audio file data tagging ID3 format editor, support ID3 tag version, this audio tool can read and write metadata tags for MP3 audio files.TeamProjectDaNang: Ðà N?ng nhóm l?p trình :DThaumcraft4 Research: A small application to help players of Minecraft / Thaumcraft 4 complete their research projects.Visualize and Analyze Demand for Coding Skills, Using WPF: Use data visualization app to figure-out which job skills are most in demand. WPlayer: This project using ffmpeg library, based on Media Foundation. Yammer API SDK: A C# Yammer API SDK?????-?????【??】???????: ????????????????、?????????,??????、??????????????????,???????.??????????,????????。 ??????-??????【??】??????????: ??????????????????,???????、????、????、??????、???????,??????,???????????。?????-?????【??】???????: ??????????1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】?????????: ???????????????,???????、???????????,????????,????,?????????,??????,??????! ?????-?????【??】?????????: ???????,??????,?????????????????????,???????????????????????。?????-?????【??】???????: ???????????:?????,??????!???????????????,???????、?????、??????“??”????,????,????!?????-?????【??】???????: ???????????????????,???,??????????、???????????????????。??????,????、????，??????！ ?????-?????【??】???????: ???????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】????? ??: ?????????????????????????,???????????,??????,??????????????...????????。??????！??????-??????【??】??????????: ??????????????????,??:??????,????,????,????,?????,??????????????.??????-??????【??】??????????: ????????????????????,?????????????,???????????.????????????,????????????! ?????-?????【??】???????: ?????????????????????????,???????????,??????,??????????????...????????。??????！????-????【??】????????: ????????????????、?????、?????、????、?????,??????????。????????????????!?????-?????【??】?????????: ??????,??,????????。 ... ??????????????????、??????????????????...?????-?????【??】?????????: ?????????????:????,????,????,???????,????????,??????:????????,?????!??????-??????【??】????????: ?????????????????????、????、????、??????、???????,??????、??????。??????-??????【??】??????????: ????????,??????,?????????????????????,???????????????????????。 ?????-?????【??】???????: ??????????????????????????,??????,???????????,????????????????,????????.??????. ????-????【??】????????: ??????????????,???????、???????????,????????,????,?????????,??????,??????!?????-?????【??】?????: ?????????????????,???????、????、????、??????、???????,??????,???????????。?????-?????【??】???????: ????????????、????、????、??????、????、???????,?????,?????????!?????-?????【??】?????????: ???????????????????????、??????,????、?????、????， ?????????，?????????????！ ??????-??????【??】??????????: ?????????????????????、????、????、??????、???????,??????、??????。?????-??????【??】???????: ?????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！?????-?????【??】?????????: ???????????????????????、??????,????、?????、????， ?????????，?????????????！?????-?????【??】?????????: ??????????????、????、????、??????、????、???????,?????,?????????!??????-??????【??】??????????: ?????????????????"????,????"???,????????????????????????,??????????????。 ?????-?????【??】???????: ????????????????、?????????,??????、??????????????????,???????.??????????,????????。 ????-????【??】????????: ????????????????????????,???????????????,????????????????！ ?????-?????【??】?????????: ?????,?????????,?????????????。?????????????,?????????,???????。??????-??????【??】??????????: ????????????????,????:????,????,????,??????,?????,???????????????!?????-?????【??】???????: ???????????:?????,??????!???????????????,???????、?????、??????“??”????,????,????! ?????-?????【??】?????????: ?????????????????????????、??????????????,??????????????。?????-?????【??】?????????: ???????????????,????????????,?????????????????,??????,????????!?????-?????【??】?????????: ??????????????????????,????????????,?????、??、????,?????,??????！ ?????-?????【??】???????: ????????????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！ ??????-??????【??】????????: ??????????????????????????、??????????????,??????????????。??????-??????【??】??????????: ?????????????????"????,????"???,????????????????????????,??????????????。????-????【??】????????: ????,?????????,?????????????。?????????????,?????????,???????。 ?????-?????【??】???????: ?????????????????、????、??????、????????,????????????,???????????！?????-?????【??】???????: ???????????????,????????????,?????????????????,??????,????????!?????-?????【??】?????????: ???????????????,????:????,????,????,??????,?????,???????????????! ??????-??????【??】????: ???????????????:?????? ???? ??????,???????,??????,???????。??????-??????【??】????????: ??????????????????、????、??????、????????,????????????,???????????！?????-?????【??】???????: ???????????????????,????????????,????????,???,???????????,????,????。?????,??????.????-????【??】??????: ?????????????????????????,???????????????????????,???????。?????-?????【??】???????: ???????????,????,??????????? ???? ???? ?????????,???,??,?????!

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >