Search Results

Search found 795 results on 32 pages for 'wire plant'.

Page 3/32 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Is it possible to replace the Logitech G500 wire without rebuying the mouse?

  - by leladax

  It has to be replaced ideally in whole, from the point it starts inside the mouse (with a white 4-5 piece of wires connection) to the end (of the USB connector to the computer) or at least to a considerable length because there is fatigue very near the mouse and the more I fix it there with soldering the closer it gets to being unfixable or reaching towards 'inside' the mouse where fixing it will be hard or impossible. So I wonder if there is a way to get a replacement of the whole thing or at least the inside-the-mouse connector to a certain length. Also I wonder if other mice types are identical in the connector of the inside.

  Read the article

• Falling Sand simulation

  - by Erik Forbes

  I'm trying to re-create a 'falling sand' simulation, similar to those various web toys that are out there doing the same thing - and I'm failing pretty hard. I'm not really sure where to begin. I'm trying to use cellular automata to model the behavior of the sand particles, but I'm having trouble figuring out how to make the direction in which I update the 'world' not matter... For example, one of the particle types I'd like to have is Plant. When Plant comes in contact with Water, Plant turns that Water particle into another Plant particle. The problem here though is that if I'm updating the game world from top to bottom and left to right, then a Plant particle placed in the middle of a sea of Water particles will immediately cause all of the Water particles to the right and below that new Plant particle to turn into Plants. This is not the behavior I am expecting. =( I'm having difficulty explaining exactly my difficulty, so I'll try to add more information as best I can as I go along. Suffice it to say that this is very much outside my box, as it were, and I don't even know what to search for.

  Read the article

• Backup solution

  - by user66115

  We are currently looking for a new backup solution. Our current network is 5 remote location with a tape backup in each plant. Right now we are looking at a MPLS VPN and running backups out of our main plant. The main thing that we backup are user private folders and department files. And each plant has it's own file server that houses CAD drawings. My main plan is to have every thing but that CAD drawing at the main faculty. We would start with a main backup of the drawing files and then do change backups back to the main plant. Besides tapes what would be the best way to backup. Our contact at Pc Connection is point us toward a Tandberg Data device.

  Read the article

• RPi and Java Embedded GPIO: Sensor Connections for Java Enabled Interface

  - by hinkmond

  Now we're ready to connect the hardware needed to make a static electricity sensor for the Raspberry Pi and use Java code to access it through a GPIO port. First, very carefully bend the NTE312 (or MPF-102) transistor "gate" pin (see the diagram on the back of the package or refer to the pin diagram on the Web). You can see it in the inset photo on the bottom left corner. I bent the leftmost pin of the NTE312 transistor as I held the flat part toward me. That is going to be your antenna. So, connect one of the jumper wires to the bent pin. I used the dark green jumper wire (looks almost black; coiled at the bottom) in the photo. Then push the other 2 pins of the transistor into your breadboard. Connect one of the pins to Pin # 1 (3.3V) on the GPIO header of your RPi. See the diagram if you need to glance back at it. In the photo, that's the orange jumper wire. And connect the final unconnected transistor pin to Pin # 22 (GPIO25) on the RPi header. That's the blue jumper wire in my photo. For reference, connect the LED anode (long pin on a common anode LED/short pin on a common cathode LED, check your LED pin diagram) to the same breadboard hole that is connecting to Pin # 22 (same row of holes where the blue wire is connected), and connect the other pin of the LED to GROUND (row of holes that connect to the black wire in the photo). Test by blowing up a balloon, rubbing it on your hair (or your co-worker's hair, if you are hair-challenged) to statically charge it, and bringing it near your antenna (green wire in the photo). The LED should light up when it's near and go off when you pull it away. If you need more static charge, find a co-worker with really long hair, or rub the balloon on a piece of silk (which is just as good but not as fun). Next blog post is where we do some Java coding to access this sensor on your RPi. Finally, back to software! Ha! Hinkmond

  Read the article

• Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 3)

  - by hinkmond

  So, let's now connect the parts together to make a Java Embedded ghost sensor using a Raspberry Pi. Grab your JFET transistor, LED light, wires, and breadboard and follow the connections on this diagram. The JFET transistor plugs into the breadboard with the flat part facing left. Then, plug in a wire to the same breadboard hole row as the top JFET lead (green in the diagram) and keep it unconnected to act as an antenna. Then, connect a wire (red) from the middle lead of the JFET transistor to Pin 1 on your RPi GPIO header. And, connect another wire (blue) from the lower lead of the JFET transistor to Pin 25 on your RPi GPIO header, then connect another (blue) wire from the lower lead of the JFET transistor to the long end of a common cathode LED, and finally connect the short end of the LED with a wire (black) to Pin 6 (ground) of the RPi GPIO header. That's it. Easy. Now test it. See: Ghost Sensor Testing Here's a video of me testing the Ghost Sensor circuit on my Raspberry Pi. We'll cover the Java SE app needed to record the ghost analytics in the next post. Hinkmond

  Read the article

• How to wire a verifier to a 2.0m5 Restlet using the spring extension and an xml config?

  - by Kevin Pauli

  I can't seem to find any example of how to do this. Imperatively in java it would be a piece of cake of course, but I can't seem to figure out how to inject my JaasVerifier into my SpringComponent declaratively from within the xml. It appears from the method signatures that Verifier is designed to be attached to Context, but the instance of Context itself is created as a side effect of the SpringComponent creation so I can't get a hold of it in Spring. There must be something I am missing.

  Read the article

• I wired up a z 80 using telephone wire and put a jump to 0000 0000 0000 0000

  - by john

  I put 1100 0011 0000 0000 0000 0000 in the 2764 eprom --- this is supposed to test the z80 -- I have a 555 timer running at 500 khz. Can this small program work with the z80 ? I looked at the address pins on a m465 oscilloscope. The address shows highs up to 0100 0000. I think it should only count to 0000 0000 0000 0011. Can the z80 be tested? The Santa Clara Valley also made the lm1871 radio control chip that could not show a high or a low without completing the entire rc loop.

  Read the article

• C# Is it possible to wire up an event to a method when it is finished?

  - by Martijn

  I have a .dll file and in there, there's a method called A. When I call that method I'd like to call a method of my own, method B. So my question is, is it possible to call method B immediately when method A is finished? Offcourse I can call method A and after that call method B manually. But I was wondering is there a manner to do this automatically, maybe with an event? So when method A is finished the event gets fired somehow and method A is called.

  Read the article

• Sequential WSASend() calls - can I rely on TCP to put them on the wire in the posting order?

  - by Poni

  On Windows I/O completion ports, say I do this: void function() { WSASend("1111"); // A WSASend("2222"); // B WSASend("3333"); // C } If I got a "write-complete" that says 3 bytes of WSASend() A were sent, is it possible that right after that I'll get a "write-complete" that tells me that some or all of B & C were sent, or will TCP will hold them until I re-issue a WSASend() call with the rest of A's data? Or will TCP complete it automatically?

  Read the article

• How to wire Swing DISPOSE_ON_CLOSE to menu bar option...

  - by des

  So I want to have an "Exit" option on my menubar, NP. The JFrame already has the DISPOSE_ON_CLOSE in it's setDefaultCloseOperation method. I've looked around and have yet to find what I believe is a good example... What's a good or right way? A little help please! As Always...

  Read the article

• Replacing stock Core 2 Duo heatsink fan (just the fan really) with a Dell CPU fan

  - by user647345

  My old heatsink fan broke and I'm trying to reconnect its plugs to a new fan. My Dell CPU fan has some custom Dell plug. I snipped the old fan's wire in half and kept the plug on the end of it. I want to connect it to the Dell fan wire to the plug. The motherboard is a P5Q-e, the stock Core 2 Duo fan was .20A and the dell is .70A. Is that going to matter? The wire from the fan has four wires, the wire with the plug has four wires. They share three, of the four colors: red, black, and blue. Dell's fourth wire is white, while the plug's fourth wire is yellow. Is it safe to assume that I just connect the yellow and the white plug together and match the rest up? I don't want to take any risk of damaging anything. It runs fine passively without a fan, but I have speedstep on, so I would like to use this fan and just fasten it to the heatsink with some twist ties and paperclips and call it a day.

  Read the article

• Guice + Quartz + iBatis

  - by DroidIn.net

  I'm trying to wire together Guice (Java), Quartz scheduler and iBatis (iBaGuice) to do the following: Start command line utility-scanner using main() Periodically scan directory (provided as argument) for files containing formatted output (XML or YAML) When file is detected, parse and output result to the database The problems: I used this example to wire Guice and Quartz. However I'm missing some important details which I'm asking in the comments but the post is somewhat dated so I'm quoting it here also: It's not obvious how to set-up the scheduler. Where and how would I wire the Trigger (I can use Trigger#makeMinutelyTrigger)? I really have just one type of job I will be executing, I understand that details in the JobFactory#newJob are coming from the TriggerFiredBundle parameter but where/how do I wire that? And where/how do I create or wire concrete Job?

  Read the article

• Vattenfall Accelerates Projects and Cuts Costs with AutoVue Document Visualization

  Ringhals, a Swedish nuclear power plant, part of the Vattenfall Group, produces 20 percent of the country's electricity and is the largest power station in the Nordic region. Ringhals has standardized on AutoVue for most of their engineering and asset document visualization requirements throughout their plant maintenance, design and engineering operations. As a result, they have cut IT maintenance costs, increased productivity, and improved maintenance operations.

  Read the article

• Motherboard wiring

  - by ML

  I am putting a new motherboard in a chenbro chasis and I dont get how to plugin the wires for powerSW resetSW, etc. It is a SuperMicro P4DP6 motherboard. ** I cant post an image yet, but here is a long to the spot on the mobo where this goes: http://andrewslack.info/mobo.png The powerSW lead is a green and white wire. I have the wire for PowerSW in place as the white wire ground and I have tried the reverse even (green to ground). The wire is covering Pin 1 and 2 in the diagram And I press the power button on the machine and nothing happens. It worked before I replaced the motherboard, the 24-pin ATX power leas is connected as well as the 2dn 6-pin optional power. Thoughts?

  Read the article

• Motherboard wiring

  - by ML

  I am putting a new motherboard in a chenbro chasis and I dont get how to plugin the wires for powerSW resetSW, etc. It is a SuperMicro P4DP6 motherboard. ** I cant post an image yet, but here is a long to the spot on the mobo where this goes: http://andrewslack.info/mobo.png The powerSW lead is a green and white wire. I have the wire for PowerSW in place as the white wire ground and I have tried the reverse even (green to ground). The wire is covering Pin 1 and 2 in the diagram And I press the power button on the machine and nothing happens. It worked before I replaced the motherboard, the 24-pin ATX power leas is connected as well as the 2dn 6-pin optional power. Thoughts?

  Read the article

• 12.04 Wi-Fi not working correctly with Intel Pro/Wireless 3945ABG

  - by Jerel

  This is a very strange problem. The only time the Wi-Fi works is when I have the wired connection connected. I have a Dell 6400/e1505 with the Broadcom BCM 4401-B0 internal NIC, and the Intel Pro/Wireless 3945ABG Wi-Fi adapter. I was on 10.0.4 LTS before, and I remember having to screw around to get the Wi-Fi to work, but that was years ago, and now it's acting even stranger than it did back then. If I boot up with the wire connected, the Wi-Fi starts up. If I boot up without the wire connected, the Wi-Fi won't start at all. If after booting with the wire connected, and the Wi-Fi starts up, I then disable the wireless, the wired connection works fine. Without the wire connected, dmesg shows the iwl3945 driver loading and starting with no errors, and the wireless adapter activated. Running rfkill list shows no blocks, but there is no connection to my Wi-Fi. Help! I am more confused than a chameleon in a bag of Skittles.

  Read the article

• I don't get any Internet when I connect connect Cisco DPC3825 DOCSIS 3.0 Gateway with DLink DIR-625 [on hold]

  - by Asif Akhtar

  I am using Cisco DPC3825 DOCSIS 3.0 Gateway as my modem and router right now and it works fine on a computer directly connected to Cisco DPC3825 DOCSIS 3.0 Gateway with wire but I am getting very low/poor signal strength on my wireless computer due to which I am looking to install DLink DIR-625 as my router but because when I connect Cisco DPC3825 DOCSIS 3.0 Gateway with DLink DIR-625 and connect my computer with wire to DIR-625 then I don’t get any Internet.(I get Internet when I connect my computer with wire with Cisco DPC3825 DOCSIS 3.0 and I know there is nothing wrong with DLink DIR-625).

  Read the article

• Perl cron job stays running

  - by Dylan

  I'm currently using a cron job to have a Perl script that tells my Arduino to cycle my aquaponics system and all is well, except the Perl script doesn't die as intended. Here is my cron job: */15 * * * * /home/dburke/scripts/hal/bin/main.pl cycle And below is my Perl script: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $pid = fork(); my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { if ($args eq "cycle") { my $stop = 0; sleep(1); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); while ($stop == 0) { sleep(2); } die "Done."; } else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } } Why wouldn't it die from the statement die "Done.";? It runs fine from the command line and also interprets the 'cycle' argument fine. When it runs in cron it runs fine, however, the process never dies and while each process doesn't continue to cycle the system it does seem to be looping in some way due to the fact that it ups my system load very quickly. If you'd like more information, just ask. EDIT: I have changed to code to: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C if ($args eq "cycle") { open (LOG, '>>log.txt'); print LOG "Cycle started.\n"; my $stop = 0; sleep(2); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; print LOG "Alarm is being set.\n"; alarm (420); print LOG "Alarm is set.\n"; while ($stop == 0) { print LOG "In while-sleep loop.\n"; sleep(2); } print LOG "The loop has been escaped.\n"; die "Done."; print LOG "No one should ever see this."; } else { my $pid = fork(); $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } }

  Read the article

• Telerik MVC Grid won't load data into details table (subtable)

  - by henriksen

  I have a list of Plants and assosiated Projects. I want to output this in a table with all the Plants and use Telerik.Grid to expand a Plant, show a Telerik.Grid with associated Projects. I want the Projects to be dynamically loaded with Ajax. The code for the grid: @(Html.Telerik().Grid<PlantDto>() .Name("Plants") .Columns(columns => { columns.Bound(plant => plant.Title); }) .DetailView(details => details.ClientTemplate( Html.Telerik().Grid<ProjectDto>() .Name("Plant_<#= Id #>") .DataBinding(dataBinding => dataBinding.Ajax() .Select("ProjectsForPlant", "User", new { plantId = "<#= Id #>" })) .ToHtmlString() )) .DataBinding(dataBinding => dataBinding.Ajax().Select("PlantsForUser", "User")) ) The initial data is loaded into the grid just fine (the list of Plants) but when I expand a plant I just get an empty sub-table. Looking in FireBug there are no calls to the server. The controller that should serve the list of projects is never called. Anyone have an idea on what it could be?

  Read the article

• Continuously check nestat output for a particular program

  - by Vihaan Verma

  I have a android emulator running on port 5554. I want to continuously watch the netstat output concerning emulator stuff. right now I have to manually execute this command every time sudo netstat -plant | grep emulator I thought doing something like this would repeat above command automatically every 2 sec. watch sudo netstat -plant | grep emulator but instead it hangs the terminal. How to achieve such functionality ? Thanks

  Read the article

• Creating a new nested resource

  - by Bobby B

  I'm working on a basic garden logging application which consists of gardens, plants and planted plants. Each user has one or many gardens, plants are master definitions, and a planted plant can be thought of as an instance of a plant in a specific user's garden. In my routes.rb file I have the following: map.resources :gardens do |gardens| gardens.resources :planted_plants, :has_many => :plant_log_entries, :collection => { :filter => :post, :choose_garden => :post} gardens.resources :garden_log_entries end map.resources :plants This makes sense to me when retrieving a list of planted_plants in a user's garden, but I'd like to create a planted_plant record from the index of plant. The problem is, a user can have multiple gardens. How can I create a new form for a planted_plant that allows the user to specify which garden should be used? The current route requires a garden_id - which makes sense for retrieval, but I'd like to supply that as a parameter for creation. Thanks in advance for any help!

  Read the article

• List view pages in google index

  - by plantify

  We have a large database of items which are viewable as individual items (they are plants) (url example http://www.plantify.co.uk/Abelia-chinensis/plant-5087) or in a list view (url example http://www.plantify.co.uk/page-1/plant). There is a link on the individual page to the list view. We want to index in google for the term Abelia chinensis. My question revolves around the list view and its impact on SEO. Should we prevent google from indexing the list view? Should we put a no follow on the link to the list view to prevent us from losing link 'juice' to a page that is really on for navigation/

  Read the article

• Good WPF focused blogs and/or podcasts?

  - by Steve the Plant

  Are there any good WPF focused blogs and/or podcasts out there?

  Read the article

• Good C# focused blogs and/or podcasts?

  - by Steve the Plant

  Are there any good C# focused blogs and/or podcasts out there?

  Read the article

• Mixing libraries with and without RTTI with GCC on Mac OS X?

  - by Steve the Plant

  I've been banging my head on an issue and before I continue injuring myself some more, I'd like to confirm: Is it possible to have a GCC project that uses libraries that are compiled with and without RTTI? So, for example, I have project A (compiled without RTTI) that uses library B (compiled with RTTI) and library C (compiled without RTTI). In theory, is all that supposed to compile and link with no problems?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >