Search Results

Search found 4248 results on 170 pages for 'adsl router'.

Page 30/170 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Connecting Wii to router to Proxy Server via VPN to BBC iPlayer

  - by nkimber

  I live in the USA and want to be able to watch UK TV streamed over the web. The relevant services are geographically crippled. I can do this by using a VPN proxy server in the UK, connecting to the VPN service using a straight Windows VPN connection. However, this means I have to watch everything on my PC. The BBC iPlayer works on the Wii in the UK. So, I'd like to connect my Wii to a wireless router (LinkSys WRT54G2) and have that be automatically connected via VPN to my proxy service in the UK. If I can do this then I'd be able to stream UK TV direct to my TV via the Wii. I thought I could have one router act as my VPN connection, connected to a 2nd router that connects to my Cable internet access. But this bit isn't working, any thoughts?

  Read the article

• WRTU54G-TM T-Mobile@Home router with 3rd party firmware

  - by dlamblin

  I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly?

  Read the article

• How to open ports on modem for better torrent performance

  - by Mehper C. Palavuzlar

  I've been using utorrent to download and upload torrents for a long time. Recently someone told me that I need to open port(s) for utorrent from my modem settings for better downloading and uploading performance. Is it true? If yes, how can I do that? My utorrent version: 2.0 and the port used for incoming connections: 61829. My modem: Yaksu S200 ADSL router modem and I can reach its settings via web interface. I looked at the settings but they seem a bit complicated to me. Other info you may need to know: I have dynamic IP. I'm using Win7 x64.

  Read the article

• Wireless clients have no route to ethernet clients in OpenWrt router

  - by superjoe30

  I'm using OpenWrt Kamikaze 8.09 on a Linksys WRT54g v1.1 router. I just flashed it with default settings and got everything working, except my wireless laptop cannot ping my desktop which is wired to the router. What can I do to fix this? (My desktop can ping other desktops wired to the router) My routing table: config 'defaults' option 'syn_flood' '1' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'zone' option 'name' 'lan' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'zone' option 'name' 'wan' option 'input' 'REJECT' option 'output' 'ACCEPT' option 'forward' 'REJECT' option 'masq' '1' config 'forwarding' option 'src' 'lan' option 'dest' 'wan' option 'mtu_fix' '1' config 'redirect' option 'src' 'wan' option '_name' 'ssh' option 'proto' 'tcp' option 'src_dport' '22' option 'dest_ip' '192.168.1.100' option 'dest_port' '22' config 'redirect' option 'src' 'wan' option '_name' 'http' option 'proto' 'tcp' option 'src_dport' '8888' option 'dest_ip' '192.168.1.100' option 'dest_port' '8888'

  Read the article

• Print server not being recognized after switching router and upgrading to 64 bit

  - by picardo

  I recently upgraded Windows 7 from 32 bit to 64 bit. I also switched my router from a very old model of Netgear to TP-Link. Before these updates, I had been using a USB print server by IOGear. After the updates, I took care to reinstall the drivers for both the print server and the printer, and picked the option to install a printer via TCP/IP, but no matter what I did, the driver software couldn't locate the print server on my network. I hit refresh, restarted my machine, turned off the firewalls and tried again. Still nothing. I'm at my wit's end. What else is left to try? Edit: More info. The print server is connected to the router via LAN line. The computer is connected to the router with a wireless connection.

  Read the article

• Using Static Public IPs and Private DHCP IPs on the Same Router

  - by Andrew Larsson

  I have a subnet of public IP addresses that my ISP has provided me with. They are routed through my router (how profound) that has a a static IP. I have successfully assigned the IPs from that subnet to various devices on my network. This works just fine, they get their own public IP, they can access the Internet, and the Internet can access them. However, I would like to also assign some private IPs on my network through that same router and put them behind NAT. Is this even possible? Could a VLAN be of use? I would like to avoid putting another router on the network, which makes this is quite an awkward question.

  Read the article

• Problem with VPN using 2 Wire Router with a Linksys Router.

  - by Hiram Hubbard

  I am having a problem with a VPN between a 2 Wire router and a Linksys router. 2 wire is the client PC using Linksys Quick VPN software and Linksys RVS4000 is the server. The PC is not the issue. It works on a different network not using 2 wire. Also the Linksys RVS4000 is not the issue, 3 other user can VPN to it with no problem not using 2 Wire. The problem is with 2 Wire. The client PC is getting this error: "The remote gateway is not responding" What configuration changes are needed on the 2 Wire router (port, UPNP, etc...) and what changes are needed if any on the Linksys RVS4000? Thanks.

  Read the article

• Advantages / disadvantages of having DynDNS access on a computer vs the router

  - by Margaret

  I have a shiny new toy, a Cisco Wireless-N Gigabit Security Router with VPN (WRVS4400N). While looking through the instruction manual, I discovered that it had support for DynDNS built-in. We've currently got the DynDNS client running on one of the servers (that people SSH to, as documented in this question); but the reason for the router update is to move away from SSH to VPN. To that end, is there any difference in behaviour/functionality/maintainability to run it off the computer, as opposed to the router? Thus far, DynDNS has more or less a set-and-forget setup, but since the feature was there, I wanted to know if it was a better location for the process...

  Read the article

• LinkSys router suddenly cannot get an IP address

  - by user43208

  I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

  Read the article

• router cannot get ip address

  - by user43208

  Hi guys, I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

  Read the article

• Can't connect Alienware M11x wireless to internet thru families router

  - by Jim Kron

  Morning All, Have an Alienware M11x loaded with Win 7 Premium with the Dell half card wifi. Also have a Netgear and Belkin USB external adapters (b/g and N to include dual radios. No joy either. Families Internet is served thru Charter and they use a Motorola Router. No matter if we reset the router, I cannot connect to the Net but can talk to the router. BTW... my brother only uses WEP as a number of connected items are old and my folks are not in a high threat area for attacks. Frustrated, as I know what I'm doing but this really has me stumped. Any thoughts? Much appreciated, Jim

  Read the article

• Process of carrying out a BER Test

  - by data

  I am subscribed to an ISP supplying a 3meg ADSL line. Lately (for the last 4 weeks) speeds have dropped from the usual average downstream speed of ~250kbps to just 0.14Mbps (according to speedtest.net) and employees are complaining about lack of access to the server. I have been calling customer support and logging calls for the last 3 weeks, but they have been unable to determine the source of the problem other than carrying out a few bitstream tests and checking the DHCP renewal times. I am going to call back and suggest carrying out a BER test. What type of equipment is needed to carry out this test? I have access to a wide range of Cisco networking equipment. Other: We don't need a leased line as there are less than ten employees.

  Read the article

• Multi Gateway and Backup Routing on a cisco router

  - by user64880

  Hi all, I have a 2611 Cisco Router with only one Fastethernet port Now I have two internet gateways. I want to config my router as when primary routing fails second routing automatically start to route all my packets. When I set 2 IP route command in my router then I check I see it work well but when peer IP on primary routing is down it can not change to second routing until I remove first route command.In the following I write my setting. How can I set it? interface FastEthernet0/0 ip address 81.12.21.100 255.255.255.248 secondary ip address 62.220.97.14 255.255.255.252 ip route 0.0.0.0 0.0.0.0 62.220.97.13 ip route 0.0.0.0 0.0.0.0 81.12.21.97 100 Cheer, Kamal

  Read the article

• Access VirtualBox-ed server from behind the router

  - by migajek

  I'm having the following configuration: Windows 7 hosting VirtualBox and it's guest: Ubuntu The machine (physical) which runs VirtualBox is behind the router and has the address of 192.168.0.110 VirtualBox runs the Bridged network, and the IP of VirtualBox-ed Ubuntu (eth0) is 192.168.0.200 Host (Win7) is running HTTP service on port 80, while guest (Ubuntu) is running it's service on port 9000 I can access both services from inside the network by typing the ip_address:port and this works fine. Both ports are forwarded on the router to their's respective IPs: 80 -> 192.168.0.110:80 9000 -> 192.168.0.200:9000 Unfortunately, accessing the router's external IP doesn't work as expected. While external_ip:80 works correctly, external_ip:9000 - doesn't I believe the problem is VBox - related, since the same network is running also other physical machine with Ubuntu and http service on 8000 and this one is forwarded correctly.

  Read the article

• Network router and switch configuration

  - by gilly3

  Can I put a switch before my router in my home network? Here is a diagram of how I want to set up my network: ________________________________ ________________________________________ | | | | | Cable Access Panel | | Home Office | | _____________ ________ | | _____________ | | | | | | | | | | _________ | | | Cable Modem |--->| Switch |-------------->| Router |____| | | | |_____________| |________| | | |_____________| | Printer | | |______________________/____\____| | / | \ |_________| | ___/_ _\___ | _____/ ____|____ \_____ | | | | | | | | | | | | | | PC1 | | PC2 | | | PC3 | | Ext. HD | | PC4 | | |_____| |_____| | |_____| |_________| |_____| | |________________________________________| The reason I want to do this is because my router is also my wireless access point. My cable modem is located in the far corner of my home where my phone/tv/network access panel is. I'd rather keep the wireless access point in a more central location, but I'm not sure if DHCP will continue to work properly with that configuration. Edit: I'd like to continue to be able to share files and access my networked drive and printer from each computer in the house.

  Read the article

• Add a server between router and switch (production)

  - by Kossel

  I have a small office network basically like below, there are more router/pc connected in S1. As you can see, the router is doing job of DHCP, DNS. but now I wish to add a Linux server between R1 and S1, So I can monitor the network traffic and do other more advance server admin stuff. the whole office network is 192.168.1.x and people are using their computer everyday. What network configuration should the new Linux server have (both interfaces) in order to minimize the changes need in the network? tried to change R1 ip to 192.168.100.1 them add the server with FE0/0 192.168.100.1 and FE0/1 192.168.1.1 but looks cannot ping the original Router..

  Read the article

• Proccess of carrying out a BER Test

  - by data

  I am subscribed to an ISP supplying a 3meg ADSL line. Lately (for the last 4 weeks) speeds have dropped from the usual average downstream speed of ~250kbps to just 0.14Mbps (according to speedtest.net) and employees are complaining about lack of access to the server. I have been calling customer support and logging calls for the last 3 weeks, but they have been unable to determine the source of the problem other carrying out a few bitstream tests and checking the DHCP renewal times. I am going to call back and suggest carrying out a BER test. What type of equipment is needed to carry out this test? I have access to a wide range of Cisco networking equipment. Other: We dont need a leased line as there are less than ten employees.

  Read the article

• problem on expand network using a router

  - by Jose

  I have a Netgear FS605 v3 router, and i'm trying to expand my network. The router is connected to the cable modem with cat5 cable. I have 2 laptop connected to the router but i'm only able to get internet connectivity in one. The first laptop i turn on, get the signal and the other one will show no connectivity. I have restarted all the devices many times but no luck. Can somebody explain me how to get this solved. Thanks.

  Read the article

• D Link DSL G624T Router will work wirelessly but not via cable

  - by Andy Fensome

  I have a D Link router which works in providing a wireless internet connection for my main PC and secondary notebook. I have been advised that the internet connection to the main pc will be better if I wire the router directly to the PC. I have tried this and can not get a connection. I just keep getting the message network cable unplugged. I have had the ethernet adaptor checked out on the pc and the cable is good ( also checked out). Anything I can do or do I have a bad router. I have tried the cable in all 4 ports and the message is still the same.

  Read the article

• Need reasonably priced router with QoS support [closed]

  - by ULTRA_POROV

  I dont need wireless. I am expecting very heavy traffic, with possibly thousands of tcp connections open at one time. This would require that the router has good hardware. I also need to limit the different services i will provide. Lets say i need to guarantee 60% of all the bandwidth to HTTP, 10% FTP, and 10% for Mail... So the router software must have flexible QoS options as well. I don't know which one to chooose, because this information is usually not given on the router specs.

  Read the article

• Static routing on a TP-Link TL-WR1043ND

  - by igor

  My home network setup looks like this: Both routers are TP-Link TL-WR1043ND routers. The basement router handles all devices in the house that are connected via cable, handing out addresses for the 10.89.49.0/24 network via DHCP. Wireless doesn’t really work from the basement, as the signal is too weak, so I have disabled it. To do WiFi, I have added a second (identical) router downstairs. On the WAN side it is assigned the 10.89.49.101 IP address from the basement router, and on its LAN it provides the 10.89.7.0/24 network. Basic internet access works flawlessly from any device this way. I am now facing the problem that I am not able to communicate (e.g. SSH) between all devices, wired or wireless. I am able to connect from a wireless device to a wired device, for example SSH-ing from 10.89.7.X to 10.89.49.Y, but it doesn’t work the other way round—despite the fact that I have added a static route to the basement router: Does anybody have any idea on how to solve it? Both routers have already been upgraded to use the most recent firmware from TP-Link.com (Build 110429), to no avail. Errata: I would like to stick with the official firmware, switching to something like DD-WRT or OpenWrt only as a last resort.

  Read the article

• Asus WL-520GU conflicting subnet (and/or IP) with 2Wire DSL

  - by Paula

  I have an Asus wireless router: WL-520GU... and an AT&T 2Wire for my DSL connection. When I try to browse anywhere, I just get an odd message from the Asus router (in the common Asus broken-English, bad formatting, and awful spelling): http://postimage.org/image/upxrjflcj I guess it's trying to say: Your Asus Router and your 2Wire have the same subnet mask. (It doesn't say if that's good, or bad... but it sounds like they must be different.) but... But for the "solution" it looks like it's trying to say: Your Asus Router and your 2Wire have the same IP address. My Asus has the defaults: 192.168.1.1 and 255.255.255.0 My 2Wire has: 192.168.1.66 I'm not seeing where the conflict(s) could be. The Asus firmware is v3.0.0.14 . None of these problems occur with the old v3.0.0.8 firmware. Any ideas on how to fix this? (PLEASE don't say to run a totally different DD/Tomato firmware because it's "better". I need to fix THIS 1 problem, not try to convince my company to switch everything to an entirely different set of problems.)

  Read the article

• Problem with TL-R480T+ and static routes

  - by Globulopolis

  Hi! I've some question about this router. Before starting, some configurations, specified by my provider. Wan1 VPN IP - 192.168.172.84 Mask - 255.255.255.0 Gateway - 192.168.172.253 DNS - 195.110.6.7 Wan2 Dynamic IP DHCP - 168.120.1.34 Mask - 255.255.255.0 Router IP 192.168.1.1 Computer IP 192.168.1.7 Routes: route -p add 192.168.0.0 mask 255.255.0.0 192.168.172.253 route -p add 195.110.6.0 mask 255.255.254.0 192.168.172.253 route -p add 88.135.112.0 mask 255.255.240.0 192.168.172.253 route -p add 178.219.160.0 mask 255.255.240.0 192.168.172.253 For first provider I need to provide a routes. 'Cause router does not support different routes for different WAN interfaces I put them in "Static routes". But when I try to save them I've got an error: Destination IP address can not be set in a same subnet with the WAN or LAN IP address. If I change IP's to local like 192.168.x.x router tell me: Gateway must be set in a same subnet with WAN or LAN IP address. Changing mask on WAN1 interface to 255.255.0.0 doesn't help. Any ideas? PS! Or maybe I'm must email to TP-Link support?

  Read the article

• can't ssh within LAN, but can connect from outside

  - by Patrick B.

  A strange issue: I have a desktop running Ubuntu 10.04 behind a Netgear WNR1000 router performing NAT. I would like to be able to ssh into the desktop from my laptop (running Windows 7 and Cygwin). When at home, both the desktop and the laptop are connected by wireless (the desktop is in a different room from the router). sshd seems to be running fine, since ssh localhost from the desktop works without trouble. Also, ssh my.ip.address from my laptop when it is not behind the router works fine (I am forwarding port 22 on the router to my desktop). However, ssh same.ip.address from within the LAN fails with "Connection refused". ssh 192.168.local.ip.address fails with a different message, "Connection timed out". I can connect if I first ssh to a machine outside the LAN. So far I haven't found anything with Google because with the search terms that seem like they would be relevant, the vast majority of people have the opposite problem - i.e., they can't connect from outside the LAN but can connect within it. I can port forward through a remote server when I'm at home, but this seems like a totally absurd way to connect two computers on the same home LAN. I have already tried stopping and starting sshd on the desktop. Any thoughts?

  Read the article

• How have multiple web servers and IPs on the same physical network

  - by jsigned

  I do web development out of a small office and need to have multiple physical and virtual servers that can be accessed from the internet. I also have a number of devices (computers, laptops, tablets, printers, etc) that need connections as well. I have gotten a subnet of 8 IP's from my ISP and while that is adequate for the web servers its far too small for everything that needs access to the network. My router is an ASUS RT-N16 running DD-WRT. I'm just smart enough about this routing topic to be dangerous, think 2 year old with a magic marker. I would like to keep my internal network NAT'ed on the 192.168.x.x network and route the 68.69.x.x 255.255.255.248 traffic directly to the servers. The physical network consists of the 4 port DD-WRT router and an unmanaged gig switch. I have a fiber connection to the office that works as an Ethernet port. In other words I can plug my laptop directly into it and have access to the internet. There is no login or password and the router is setup to get DHCP from the ISP, and to provide DHCP addresses for the internal network. What I've done so far is google and try different configurations with little success. In the end I decided I didn't even know how to ask the questions needed. My questions are: Is this the best way to configure the network? How do you do it? VLANs? Multiple routers? I've never had to configure a router using anything more than the GUI so if this is command line stuff be gentle.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >