Search Results

Search found 1175 results on 47 pages for 'air'.

Page 30/47 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• How does a hard drive compare to Flash memory working as a hard drive in terms of speed?

  - by Jian Lin

  Some experiment I did with hard drive read/write speed was 10MB/s write and 40MB/s read, and with a USB Flash drive, it can be 5MB/s write and 10MB/s read. Also, if I put a virtual hard drive .vhd file in a hard drive or in a USB Flash drive and try a Virtual Machine using it, the one using the hard drive is quite fast, while the one using the USB Flash drive is close to not usable. So I wonder some early netbooks use 4GB or 8GB flash memory as the hard drive, and even the Apple Mac Air has an option of using flash memory instead of a hard drive. But in those situation, will the speed be slower than using a hard drive, like in the case of a USB Flash drive?

  Read the article

• Lost Internet access in Windows XP Mode virtual pc under Windows 7

  - by kousen

  In my office, I created and configured a virtual pc in Windows XP Mode. Everything was working fine. Now I'm on the road, and my Internet access (in the host operation system) is either via a hotel wifi or through my Verizon air card. Either way, I've lost Internet access in the virtual pc. I went into the Virtual PC settings, and set the Networking value to Shared Networking (NAT). Actually, I've tried every combination I can find, but I can't get from the virtual pc to the web. I'm hoping to use the virtual box at a client site, so I really need that access. Is there anything I can do to get it back? Thanks for any help.

  Read the article

• Exchange 2007 ignoring Send Connectors (again)

  - by gravyface

  Wow, I'm at a loss here -- I posted this exact same question a while back and it's doing the exact same thing: my Send Connector I've created for "Microsoft Domains" (hotmail.com cost 1) is being ignored again and routed through the "Default" Send Connector (* cost 10). Last time, I had the same cost for both Send Connectors, but I've tried setting the Default connector to 5, 10, 100, etc. and regardless, all mail gets routed through that connector (which smarthosts through Postini). Besides calling an air strike on Redmond, what else can I do? MS is blocking Postini again, need to get this working permanently.

  Read the article

• PPTP VPN on OS X and iOS failed to connect Facebook and Youtube

  - by bGiraffe

  Thnaks for reading. I setup a VPN server on my Buffalo WHR-HP-G300N router at Macau, and use it for access website over China Firewall when i travel in China. On Android and Windows, everything work fine, however on my Macbook Air and iPad, it is not working. I can access blocked site like badoo.com but not facebook and youtube. If i ping it at terminal, it said "ping: cannot resolve facebook.com: Unknown host". After i read this http://cp.hidemynet.com/knowledgebase.php?action=displayarticle&id=26, i find i can restart my router and reboot my Macbook, and connect to VPN before any request to any blocked site so that i can successfully connect to facebook and youtube. However it works sometime but not always. It is really annoying because i need to work on VPN and my Mac, would anyone can help me to solve it? Rather than restarting my router and my Mac every time. Please HELP!!! regards

  Read the article

• iMac OSX Lion upgrade - Photo Booth stopped working

  - by Tawani

  After I upgraded my [2009] iMac to OSX Lion (a few days ago), the Photo Booth program stopped working. When I click on the icon, all I get is the following error message: Photo Booth cannot be opened because of a problem With the following stack trace: Process: Photo Booth [1367] Path: /Users/USER/Desktop/*/Photo Booth.app/Contents/MacOS/Photo Booth Identifier: com.apple.PhotoBooth Version: 3.0.1 (117) Build Info: PhotoBooth-1170000~3 Code Type: X86-64 (Native) Parent Process: launchd [149] Date/Time: 2011-07-27 20:48:00.458 -0400 OS Version: Mac OS X 10.7 (11A511) Report Version: 9 Sleep/Wake UUID: BA40DCC4-26BB-480D-9590-709AA598D4CF Interval Since Last Report: 187610 sec Crashes Since Last Report: 10 Per-App Crashes Since Last Report: 7 Anonymous UUID: 9994E544-979E-4577-9413-0D163B53E3B9 Crashed Thread: 0 Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Application Specific Information: dyld: launch, loading dependent libraries Dyld Error Message: Symbol not found: _kFigTimeInvalid Referenced from: /Users/USER/Desktop/*/Photo Booth.app/Contents/MacOS/Photo Booth Expected in: /System/Library/Frameworks/CoreMedia.framework/Versions/A/CoreMedia in /Users/USER/Desktop/*/Photo Booth.app/Contents/MacOS/Photo Booth PS: I also installed OSX Lion on my MacBook Air and had no issues.

  Read the article

• Sync iCloud bookmarks with Firefox in Windows 7

  - by MDMarra

  I have four devices that I want to sync my bookmarks across: a Mac Mini, a Macbook Air, an iPad2, and a Windows 7 PC. I use Safari on the three Apple products and Firefox 8 on the Windows 7 PC. I use iCloud to sync my bookmarks with the three Apple devices, but this obviously leaves my Windows PC out of the loop. I realize that I can sync the bookmarks to IE and then constantly export them and import them into Firefox, but this is both clunky and not really a "sync" since things that I bookmark on my PC in Firefox won't show up on my other devices. What is the best way to sync my bookmarks from iCloud with a PC running Firefox 8?

  Read the article

• NAT for Sprint Nexus S "Portable Wi-Fi hotspot"

  - by Jon Rodriguez

  I am on a 2010 Macbook Air connected to the web over wifi tethering on my Sprint Nexus S. I want to be able to host a few files using MAMP, but it seems that Sprint is running a NAT. When I query checkip.dyndns.org right now, it returns 68.27.228.75. However, trying to navigate to that IP fails (even though I do have MAMP's Apache running on port 80, as verified via loopback). When I whois 68.27.228.75, it appears to be a Sprint address, with NetName "SPRINTPCS" and OrgName "Sprint Nextel Corporation". So, is there some way I can circumvent Sprint's NAT to allow people to connect to my server that is running on a Nexus S Portable Wi-Fi hotspot?

  Read the article

• How do I use an internal SSD as a scratch disk for FCP X?

  - by andrewb

  I'm contemplating setting up my MacBook Air as a video editing machine. If I do this, I'll upgrade to a 256 GB SSD, and I should be able to keep around 100 GB or more free for video editing. The video files would of course be stored externally, but save purchasing some expensive Thunderbolt RAID device (which I suppose is gradually becoming more of an option), it will be slow for read/writes. How can I have a set up where I take advantage of my SSD's speed for a scratch disk/cache for FCP X, but still have the TB(s) of storage of externals? I don't want to have to be moving files constantly back and forth, this is about saving time not wasting it.

  Read the article

• how to connect only ethernet and only wireless hosts together

  - by Ashok Das

  Here is my problem. I have an android tablet that have only WiFi for network connectivity and I have a windows server that have only Ethernet ports for network connection. Now I want to telnet to my server from my tablet. I think some wireless to Ethernet converter required in between. I am planning to use Buffalo Air Station WCR-GN or TP-LINK TL-WR740N or TL-WR702N. The connection setup should be like this: [server]<---Ethernet---[WIFI router]<---wireless---[Tablet]. Now I am in doubt will this setup work? Anybody please help me with this. Regards Ashok

  Read the article

• iPhoto fails to see my new iPhone 3Gs

  - by Alexey Kulikov

  Two weeks ago I have bought the new iPhone 3Gs. It synced like charm with iTunes and I was happy until a couple of days ago when I noticed that there was absolutely no way I could get any photos from the phone to my mac, as it doesn't even appear in the device list. Long story short — i have even tried resetting Leopard completely from scratch (and formatting the HD beforehand). Still no joy. Leopard Snow 10.6.1 absolutely clean install with all updates iPhone 3Gs 3.1.2 - syncs like charm with iTunes, but NOT iPhoto Mac Book Air Any help will be greatly appreciated! update: It works with my old iphone, why can't the 3Gs work?

  Read the article

• Sync a specific folder of contacts to iPhone

  - by colemanm

  Is there a simple way to organize contacts in Outlook/Entourage and only have a subset of them synchronize with the iPhone over Exchange ActiveSync? Our CEO has thousands of contacts in his mailbox, but would prefer if only a small portion of them synched to his phone over the air... The iPhone's performance takes a huge hit keeping that massive dataset in order. If he could put some of the records in subfolders or something and only sync the top level, I think that would work for him. Does anyone know if this is possible?

  Read the article

• Entering new user data into AD LDS

  - by Robert Koritnik

  I need some help configuring AD LDS (Active Directory Lightweight Directory Services). I'm not an administrator, have never configured domains and I don't have a clue how to add new users to existing domains. The thing is I need to develop an app on top of Sharepoint 2010 that must be connected to AD. I've chosen AD LDS because I can install it on Windows 7 and it acts as an active directory even though there's no domain controller present in the network. What I've done so far: I've installed AD LDS I've added a new instance with appication directory partition name DN=Air,DC=Watanabe,DC=pri I can connect to it using ADSI Edit and see all kinds of strange But now I don't know what to do? When it opens I can see the window below, but where's next? Can anybody give me some guidelines, how can I add domain users, so I can use them in my app AD required app?

  Read the article

• Formatted a Bootcamped drive as a dynamic disk, now can't boot to either Mac or Windows

  - by Steven H

  I was trying to create an extra partition to get a file from the Windows side of my Macbook Air to the Mac side, and I accidentally made the disk dynamic without realizing it. I am now unable to boot to the Mac side (holding Alt to go into the system manager at startup doesn't even list the Mac partition), and the Windows side blue screens during boot (goes so quickly that it doesn't even get to the error code before restarting). What can I do to fix the issue? I don't know how to make a bootable flash drive that a Mac will recognize, and Disk Utility (via Internet Recovery) couldn't do anything. (cross-posted from apple.stackexchange)

  Read the article

• Drivers for Wacom Bamboo Tablet on Windows 7

  - by hcl

  I would like to use my Bamboo tablet on my newly installed windows 7 box. However I definitively only want have the drivers to be installed. I don’t want all the additional software which is provided by Wacom in the standard software Installation package. I already tried different installation packages from the Wacom webpage, but I have not found a package which does not install all the additional apps (Adobe AIR etc). I also have not found an option to disable the installation of the undesired apps in the installer . Have I missed something? May someone give me a hint on how to get/install the drivers only?

  Read the article

• When to move into a CRM system?

  - by Dan

  I have a client that is currently managing around 5000+ contacts via Outlook. There is also a BES Express installation in place. There are a couple problems. First, there is a corrupt contact in there somewhere that is preventing either a cabled or over the air sync of the complete list to a blackberry. The second, is that it just seems to be getting a bit unruly. They currently have a license for ACT, which I'm trying to get them to move into, but at what number does the contact list need to be at to migrate away from using Outlook/Exchange and into a real CRM solution?

  Read the article

• Server Room Protocols/Server Room Management

  - by Matthew E

  Hi, I'm new to this site but have found the articles and feedback very useful. We have a Server Room which our Organisation owns and controls, yet there are several thirs party companies that have open access to this room. As such, we have been asked to put together a protocol paper that stipulates the standards that we expect to be adhered to when working in this room. Other than the monitoring of UPS loads, Air Cooling functionality, alarm systems etc, does any one have any guidance on the kind of issues that need to be documented to make this protocol all encompassing? I'm thinking along the lines of not leaving cardboard or other combustibles in the room, not having food and drink in the room, not altering the fabric of the building by drilling through walls etc? Many thanks in advance for any guidance provided.

  Read the article

• Bluetooth not seeing mouse (Fedora)

  - by Chris

  I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt), blueman-manager, or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

  Read the article

• My C disk show 33gb less space then i have bcs of hidden or encrypted files i cant find

  - by Peter

  Hello I was hoping some one could help me my drive has 92gbs used space, 95gbs free out of 220 partition 33gbs in the air i cant find, already did cleanup, emptied recycle bin, history and temp files also and I believe sin Ive seen before its possibly space my brother used with a program he uses to hide (possibly encrypted) files dont know the name just seen him do it on usb and pc dont appear visible or hidden and result is what you read above is there any way of finding them to delete them hence my brother is nowhere to b found or could it be something else??? already tried freecommander also.

  Read the article

• Connect wired-only devices to a remote wireless access point?

  - by billpg

  Hi everyone. In building A, I have a Netgear wireless access point using WPA2. Works great, no problems. In building B, I have some devices that only have wired Ethernet ports. They can't see my access point. What I need is a gizmo that connects over-the-air to my access point in building A, talks WPA2, and converts the packets to and from a wired Ethernet port. Netgear-access-point in building A      (WPA2 WiFi) Wireless bridge device          <-- Looking for this.      (Cat5 ethernet) My devices in building B. I've looked for devices on Amazon, but the descriptions are infuriatingly unclear. It says it supports WPA2, but does it support it as a client? Grrr... Any recommendations please?

  Read the article

• is airtunes compatible with airsharing

  - by Mitch Robertson

  I have an Airport Express that I have plugged into a speaker system. I can change the music in my house with my iPhone through Apple's Remote app. Great. Now is my Airport Express compatible with Air Sharing? Can I 'push' music or sound to my Airport Express and out the speakers that are plugged into it? Or is this only possible with an Apple TV? And if I get an Apple TV can I do what I'm trying to do? 'Push' music from someone's iPhone that is on the same WIFI network as mine to a speaker system?

  Read the article

• Linux Bluetooth [closed]

  - by Chris

  Not sure if this is the proper forum; please forgive me if it's not... I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run either hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt) or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

  Read the article

• Using MythTV to Stream Satellite Signal to multiple users

  - by Ammar

  I'm planning on setting up a small media center to achieve the following: I have multiple users who want to watch satellite channels I want them to be able to change the channel remotely I'm going to buy an external DVB to capture the signal Use some software to stream the channel that is selected I want to have 2 different channels at the same time, I assume I will need two DVB cards Users use VLC or Windows Media Player or whatever to view the channels How can I achieve this? I heard MythTV can do it? I tried to do some research I couldn't find enough information. Note: There's no copyright issue here. I'm streaming Free-To-Air (FTA) channels.

  Read the article

• Entering data into AD LDS

  - by Robert Koritnik

  I need some help configuring AD LDS (Active Directory Lightweight Directory Services). I'm not an administrator, have never configured domains and I don't have a clue how to add new users to existing domains. The thing is I need to develop an app that must be connected to AD. I've chosen AD LDS because I can install it on Windows 7 and it acts as an active directory even though there's no dmain controller present in the network. What I've done so far: I've installed AD LDS I've added a new instance with appication directory partition name DN=Air,DC=Watanabe,DC=pri I can connect to it using ADSI Edit and see all kinds of strange But now I don't know what to do? When it opens I can see the window below, but where's next? Can anybody give me some guidelines, how can I add domain users, so I can use them in my app AD required app?

  Read the article

• Dell Dimension 2400 problem

  - by murgatroid99

  I have a new problem with a Dell Dimension 2400 PC. Until yesterday or the day before, it was working fine, but today when I press the power button the light on the power button turns yellow instead of green, the fan behind the processor increases speed until it sounds like a jet engine, and the computer does not boot up. I cleaned out the dust in the computer so that is not the problem. Also, the fan was blowing cold air. Do any of you know what might be causing this and how I might be able to fix it?

  Read the article

• Can a Mini DisplayPort to HDMI cable support resolutions above 1920x1200?

  - by cnst

  Is it theoretically possible for a cheapo Mini DisplayPort to HDMI cable or adapter to support resolutions above 1920 × 1200, e.g. 2560 × 1440 (QHD)? Or is it always electrically-equivalent to a single-link DVI, and such resolutions above 1920×1200 are out of the question? From empirical evidence, I've tried out some rather expensive brand-name adapter from a local Apple dealer that was marked as HDMI 1.3 compliant with my mid-2013 MacBook Air (5000) and also with X230 (4000), and a QHD monitor, but was only getting a maximum of FHD resulution through such an arrangement.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >