Search Results

Search found 971 results on 39 pages for 'candidate'.

Page 30/39 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• How to Build Services from Legacy Applications

  - by Chris Falter

  The SOA consultants invaded the executive suite at your company or agency, preached the true religion, and converted the unbelievers. Now by divine imperative you must convert your legacy applications into a suite of reusable services.  But as usual, you lack the time and resources that you need in order to develop the services properly.  So you googled or bing’ed, found this blog post, and began crying in gratitude.  Yes, as the title implies, I am going to reveal my easy, 3-step, works-every-time process for converting silos of legacy applications into the inventory of services your CIO has been dreaming about.  So just close your eyes and count to 3 … now open them … and here it is…. Not. While wishful thinking is too often the coin of the IT realm, even the most naive practitioner knows that converting legacy applications into reusable services requires more than a magic wand.  The reason is simple: if your starting point is your legacy applications, then you will simply be bolting a web service technology layer on top of your legacy API.  And that legacy API is built in the image of the silo applications.  Enter the wide gate of the legacy API, follow the broad path of generating service interfaces from existing code, and you will arrive at the siloed enterprise destruction that you thought you were escaping. The Straight and Narrow Path This past week I had the opportunity to learn how the FBI Criminal Justice Information Systems department has been transitioning from silo applications to a service inventory.  Lafe Hutcheson, IT Specialist in the architecture group and fellow attendee at an SOA Architect Certification Workshop, was my guide.  Lafe has survived the chaos of an SOA initiative, so it is not surprising that he was able to return from a US Army deployment to Kabul, Afghanistan with nary a scratch.  According to Lafe, building their service inventory is a three-phase process: Model a business process.  This requires intense collaboration between the IT and business wings of the organization, of course.  The FBI uses IBM Websphere tools to model the process with BPMN. Identify candidate services to facilitate the business process. Convert the BPMN to an executable BPEL orchestration, model and develop the services, and use a BPEL engine to run the process.  The FBI uses ActiveVOS for orchestration services. The 12 Step Program to End Your Legacy API Addiction Thomas Erl has documented a process for building a web service inventory that is quite similar to the FBI process. Erl’s process adds a technology architecture definition phase, which allows for the technology environment to influence the inventory blueprint.  For example, if you are using an enterprise service bus, you will probably not need to build your own utility services for logging or intermediate routing.  Erl also lists a service-oriented analysis phase that highlights the 12-step process of applying the principles of service orientation to modeling your services.  Erl depicts the modeling of a service inventory as an iterative process: model a business process, define the relevant technology architecture, define the service inventory blueprint, analyze the services, then model another business process, rinse and repeat.  (Astute readers will note that Erl’s diagram, restricted to analysis and modeling process, does not include the implementation phase that concludes the FBI service development methodology.) The service-oriented analysis phase is where you find the 12 steps that will free you from your legacy API addiction. In a nutshell, you identify the steps in the process that need services; identify the different types of services (agnostic entity services, service compositions, and utility services) that are required; apply service-orientation principles; and normalize the inventory into cohesive service models. Rather than discuss each of the 12 steps individually, I will close by simply referring my readers to Erl’s explanation.

  Read the article

• IE9 and the Mystery of the Broken Video Tag

  - by David Wesst

  I was very excited when Microsoft released the Internet Explorer 9 Release Candidate. As far as I was concerned, this was another nail in the coffin for IE6 and step in the right direction for us .NET web developers as our base camp was finally starting to support the latest and greatest future-web standards. Unfortunately, my celebration was short lived as I soon hit a snag while loading up an HTML5 site I was building in Visual Studio 2010. The Mystery After updating Internet Explorer, I ran my HTML5 site that had the oh-so-lovely HTML5 video tag showing a video. Even though this worked in IE9 Beta, it appeared that IE9 RC could not load the same file. I figured that it was the video codec. Maybe IE9 RC no longer supported the video codec I used to encode my video. Here's the code I used: <video width="854" height="480" id="myOtherVideo" autoplay="" controls=""> <source src="/DemoSite1/Media/big_buck_bunny.mp4"/> <div> <p>Your browser does not support HTML5 Video.</p> </div> </video> As you can see from the code, I had the "fail-safe" code inside the video tag. The idea there being that if the video tag, or the video files themselves, are not supported by the browser my video should fail gracefully. What was even more strange was the fact that it worked in all the other HTML5 browsers that supported video. The Investigation Whoa! DJ stop the music. How can any of that make sense? Would the IE team really take such huge strides forward only to forget to include a feature that was already in the beta? I don't think so. I did plenty of searching on the web and asking around on the web, but could not seem to find anyone else having the same problem. Eventually I came across this post talking about declaring the MIME type in the .htaccess file. That got me thinking: does my web server support the video MIME type? I was using VS2010, so how do I know what kind of MIME types are supported by default? Still, my page hosted in Cassini (the web development server in VS2010) works on the other browsers. Why wouldn't it work with IE9 RC? To answer that, it was time to open up the upgraded toolbox known as the Developer's Tools in IE9 and use the new Network Tab. The Conclusion If you take a closer look at the results displayed from the Network tab, you can see that IE9 RC has interpreted the video file as text/html rather than video/mp4. To make this work, I decided to use IIS to debug my HTML5 web application by setting the web project's properties. Then, I added the MIME types that I want to support (i.e. video/mp4, video/ogg, video/webm). Et voila! The Mystery of the Broken Video Tag is solved. After Thoughts After solving the mystery, I still had the question about why my site worked in Chrome, Safari, and Firefox 3.6. After asking around, the best answer that I received was from my colleague Tyler Doerksen. He said that IE9 likely depends on the server telling it what kind of file it is downloading rather than trying to read the metadata about the data it is trying to download before doing anything. I have no facts to back this up, but it makes sense to me. In a browser war where milliseconds can make your browser fall back a few places in the race for supremacy, maybe the IE team opted to depend on the server knowing what kind of content it is serving up. Makes sense to me. In any case, that is just an educated guess. If you have any comments, feel free to post on them below. This post also appears at http://david.wes.st

  Read the article

• How to ace Skype Interviews

  - by FelixWehmeyer

  Many companies these days opt to include a Skype interview in the recruitment process, as it comes close to a face-to-face interview without the time and costs involved for both the company and the candidate. In some cases during the recruitment process at Oracle you also might be asked to conduct a Skype interview. To help you get started with this, we researched some websites to give you several tips and tricks. What most of the bloggers say about this topic is collected in this article to help you prepare. It is all about Technology The bit that can make a Skype interview more complicated than a face-to-face or phone interview is the fact you are using additional technology. Always check the video and audio capabilities of your computer to make sure they work properly. Be prepared for connections to be limited during the interview. Using a webcam can also be confusing, if you do not have a lot of experience using it. Make sure you look at the camera and not the monitor to avoid the impression you are looking away. Practice If you do not feel comfortable using the camera, do a mock interview with a friend or family member before you have the actual interview. Be aware that facial impressions or reactions come across differently on a monitor, so make sure to practice how you  come across during the interview. Good lighting in the room also helps you make you look the best for the interviewer. You and your room Dress code, as in any face-to-face interview,is important to think about. Dress the same way as you would for face-to-face interviews and avoid patterns or informal clothing. Another tip,is to be aware of your surroundings. Make sure the room you use looks good on camera, making sure it is neat and tidy, also think about how the walls look behind you. Also make sure you do not get distracted during the interview by anyone or anything, as this will directly have an impact on your interview and your ability to focus and concentrate. What is in a name What goes for any account that you share during the recruitment process, either your email address or Skype name, is to make sure it comes across as professional. Try to avoid using nicknames or strange words in your accounts, stick to using a first name – last name or an abbreviation of the same. If you would like to read more about this topic, have a look at the links below which we used as inspiration for this blog article. 7 Deadly Skype Interview Sins is fun to read and to gives you some good advice to keep in mind. ·         http://www.inc.com/guides/201103/4-tips-for-conducting-a-job-interview-using-skype.html ·         http://blog.simplyhired.com/2012/05/5-tips-to-a-great-skype-interview.html ·         http://www.cnn.com/2011/LIVING/07/11/skype.interview.tips.cb/index.html http://www.ehow.com/how_5648281_prepare-skype-interview.html

  Read the article

• Moving from Silverlight 4 Beta to RC - Part 1

  The other day I had finished up my Task-It Webinar, written a few blog posts, and knew the time had come to move from my Silverlight 4 Beta environment up to the latest RC (release candidate) bits that were released last Monday. What disappointed me when I went to the Silverlight 4 Information Page is that it told me what to install, but not what to uninstall first. Uninstalling I'm not entirely sure if I had to uninstall anything, or if installing the new stuff would just work, but in poking around the web I found posts stating that you must uninstall the following items first. Unfortunately I'm going by memory here and have not been able to find my way back to the magic page I found in the myriad of posts that I went through: Microsoft VisualStudio Beta 2 Microsoft .NET Framework 4 Extended (apparently this must be done *before* the next one) Microsoft .NET Framework Client Profile Microsoft Silverlight 4 Tools for Visual Studio 2010 WCF RIA Services Preview for Visual Studio 2010 While I was at it, I removed a bunch of other stuff, like Blend 3, Blend 4, the SDK's associated with them, and a bunch other stuff that was old. Of course, I didn't really want/need to keep any Silverlight 3 stuff around as I am developing Task-It in Silverlight 4. If I need a Silverlight 3 environment at some point I'll set it up in a virtual environment. NOTE: One thing that I did not uninstall is the Microsoft Silverlight 4 Toolkit November 2009. The reason is that they have not released the March version yet, so if you uninstall this, youll end up having to reinstall it. Installing OK, now that I had all of that old stuff off my machine, now it was time to get the new stuff. For this part I liked Tim Heuer's post, A Guide to What has Changed in Silverlight 4 RC better than the Silverlight 4 Information Page. VisualStudio 2010 RC - I installed Ultimate, but you may not need that version. No harm, it's free for now anyway. I downloaded the .exe and the 3 .rar files, then ran the .exe. I then extracted the contents of the ISO (using WinZip) to a new directory, and now had Setup.exe, a bunch of .cab files and some other assorted stuff. I simply ran Setup.exe and chose custom install (only because I wanted to uncheck Visual C++...I don't really have a need for that) Silverlight 4 Tools for Visual Studio 2010 - As mentioned in Tim's blog post, this installs this installs Silverlight developer runtime, SDK, tools, and this installs Silverlight developer runtime, SDK, tools, and WCF RIA Services. WCF RIA Services Toolkit March 2010 - I'm not sure if/when I'll need any of this stuff, but no harm in installing it anyway. Expression Blend 4 beta - Only if you plan to use Blend, which I do. Windows Phone Developer Tools - Only if you are interested in playing with Windows Phone 7 development. Wrap Up Hopefully I got those steps right. If anyone finds anything I've missed, please just add a comment to this post and I'll update it accordingly.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Oracle GoldenGate Active-Active Part 1

  - by Nick_W

  My name is Nick Wagner, and I'm a recent addition to the Oracle Maximum Availability Architecture (MAA) product management team.  I've spent the last 15+ years working on database replication products, and I've spent the last 10 years working on the Oracle GoldenGate product.  So most of my posting will probably be focused on OGG.  One question that comes up all the time is around active-active replication with Oracle GoldenGate.  How do I know if my application is a good fit for active-active replication with GoldenGate?   To answer that, it really comes down to how you plan on handling conflict resolution.  I will delve into topology and deployment in a later blog, but here is a simple architecture: The two most common resolution routines are host based resolution and timestamp based resolution. Host based resolution is used less often, but works with the fewest application changes.  Think of it like this: any transactions from SystemA always take precedence over any transactions from SystemB.  If there is a conflict on SystemB, then the record from SystemA will overwrite it.  If there is a conflict on SystemA, then it will be ignored.  It is quite a bit less restrictive, and in most cases, as long as all the tables have primary keys, host based resolution will work just fine.  Timestamp based resolution, on the other hand, is a little trickier. In this case, you can decide which record is overwritten based on timestamps. For example, does the older record get overwritten with the newer record?  Or vice-versa?  This method not only requires primary keys on every table, but it also requires every table to have a timestamp/date column that is updated each time a record is inserted or updated on the table.  Most homegrown applications can always be customized to include these requirements, but it's a little more difficult with 3rd party applications, and might even be impossible for large ERP type applications.  If your database has these features - whether it’s primary keys for host based resolution, or primary keys and timestamp columns for timestamp based resolution - then your application could be a great candidate for active-active replication.  But table structure is not the only requirement.  The other consideration applies when there is a conflict; i.e., do I need to perform any notification or track down the user that had their data overwritten?  In most cases, I don't think it's necessary, but if it is required, OGG can always create an exceptions table that contains all of the overwritten transactions so that people can be notified. It's a bit of extra work to implement this type of option, but if the business requires it, then it can be done. Unless someone is constantly monitoring this exception table or has an automated process in dealing with exceptions, there will be a delay in getting a response back to the end user. Ideally, when setting up active-active resolution we can include some simple procedural steps or configuration options that can reduce, or in some cases eliminate the potential for conflicts.  This makes the whole implementation that much easier and foolproof.  And I'll cover these in my next blog. 

  Read the article

• Olympics data available for all on Windows Azure SQL Database and Power View

  - by jamiet

  Are you looking around for some decent test data for your BI demos? Well, if so, Microsoft have provided some data about all medals won at the Olympics Games (1900 to 2008) at OlympicsData workbook - Excel, SSIS, Azure sample; it provides analysis over athletes, countries, medal type, sport, discipline and various other dimensions. The data has been provided in an Excel workbook along with instructions on how to load the data into a Windows Azure SQL Database using SQL Server Integration Services (SSIS). Frankly though, the rigmarole of standing up your own Windows Azure SQL Database ok, SQL Azure database, is both costly (SQL Azure isn’t free) and time consuming (the provided instructions aren’t exactly an idiot’s guide and getting SSIS to work properly with Excel isn’t a barrel of laughs either). To ease the pain for all you BI folks out there that simply want to party on the data I have loaded it all into the SQL Azure database that I use for hosting AdventureWorks on Azure. You can read more about AdventureWorks on Azure below however I’ll summarise here by saying it is a SQL Azure database provided for the use of the SQL Server community and which is supported by voluntary donations. To view the data the credentials you need are: Server mhknbn2kdz.database.windows.net  Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly Type those into SSMS and away you go, the data is provided in four tables [olympics].[Sport], [olympics].[Discipline], [olympics].[Event] & [olympics].[Medalist]: I figured this would be a good candidate for a Power View report so I fired up Excel 2013 and built such a report to slice’n’dice through the data – here are some screenshots that should give you a flavour of what is available: A view of all the available data Where do all the gymastics medals go? Which countries do top ten all-time medal winners come from? You get the idea. There is masses of information here and if you have Excel 2013 handy Power View provides a quick and easy way of surfing through it. To save you the bother of setting up the Power View report yourself you can have the one that I took these screenshots from, it is available on my SkyDrive at OlympicsAnalysis.xlsx so just hit the link and download to play to your heart’s content. Party on, people! As I said above the data is hosted on a SQL Azure database that I use for hosting “AdventureWorks on Azure” which I first announced in March 2013 at AdventureWorks2012 now available for all on SQL Azure. I’ll repeat the pertinent parts of that blog post here: I am pleased to announce that as of today … [AdventureWorks2012] now resides on SQL Azure and is available for anyone, absolutely anyone, to connect to and use for their own means. This database is free for you to use but SQL Azure is of course not free so before I give you the credentials please lend me your ears eyes for a short while longer. AdventureWorks on Azure is being provided for the SQL Server community to use and so I am hoping that that same community will rally around to support this effort by making a voluntary donation to support the upkeep which, going on current pricing, is going to be $119.88 per year. If you would like to contribute to keep AdventureWorks on Azure up and running for that full year please donate via PayPal to [email protected] Any amount, no matter how small, will help. If those 50+ people that retweeted me beforehand all contributed $2 then that would just about be enough to keep this up for a year. If the community contributes more than we need then there are a number of additional things that could be done: Host additional databases (Northwind anyone??) Host in more datacentres (this first one is in Western Europe) Make a charitable donation That last one, a charitable donation, is something I would really like to do. The SQL Community have proved before that they can make a significant contribution to charitable orgnisations through purchasing the SQL Server MVP Deep Dives book and I harbour hopes that AdventureWorks on Azure can continue in that vein. So please, if you think AdventureWorks on Azure is something that is worth supporting please make a contribution. I’d like to emphasize that last point. If my hosting this Olympics data is useful to you please support this initiative by donating. Thanks in advance. @Jamiet

  Read the article

• MySQL Server 5.6 default my.cnf and my.ini

  - by user12626240

  We've introduced a default my.cnf / my.ini file for MySQL Server that you can now see in the 5.6.8 release candidate: # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M   # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin   # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... # port = ..... # socket = ..... # server_id = .....   # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M   sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES    There is also a template file called my-default.cnf or my-default.ini that has these lines near the start: # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL.   On Linux systems, the mysql_install_db command will copy the template file to the final location, where the server will read and use the file, removing the extra three lines. On Windows, the installer will create extra settings based on the answers you gave during installation. Neither will overwrite an existing my.cnf or my.ini file. The only initially active setting here is to change the value of  sql_mode from the server default of NO_ENGINE_SUBSTITUTION to NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES. This strict mode changes warnings for some non-standard behaviour into errors. This can cause applications which rely on the non-standard things, like dates that aren't valid, to lose data. If we had just changed the server default, the new setting would affect all servers that lack an explicit sql_mode setting, including those where strict mode is harmful. So we did it in the default file instead because that will only affect new server installations. You should expect that in our next version after 5.6, the server default will include STRICT_TRANS_TABLES. Our Windows installer and some of our connectors already use STRICT_TRANS_TABLES by default. Strict has been our preferred setting for many years and it is good to see some development platforms are using it. If you need the old behaviour, just remove the STRICT_TRANS_TABLES setting. If you do this, please also ask your application provider to make it unnecessary. They can do that by setting the session sql_mode setting in their own connections, so the rest of the applications using the server don't have to have an undesirable default. We've kept this file as small as possible because we found that our old files were too big and confused people. We've also now removed the old my-huge and related example files. One key part of this is the link to the documentation, where we will provide an introduction to some key settings. We'd like to hear your feedback on settings that will benefit most users or are most important to call out for existing users. Please do that by commenting here or if you prefer by adding comments to this bug report.

  Read the article

• Building Enterprise Smartphone App &ndash; Part 1: Why Build Smart Phone Apps

  - by Tim Murphy

  This is part 1 in a series of post based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Intro Most of us already carry smartphones. We play games on them. We keep up with what is going on with our friends and our favorite teams. We take pictures of our kids at their events. But the question is if that is all they are good for. Many companies have aspects of their business that lend themselves to being performed by mobile devices. Some of them lean toward larger device such as tablets, but many can be executed on smartphones. This and the following articles will discuss some of the possible applications of smartphone technology for businesses, the platforms that are available and the considerations you need to make when building them. I'll take a look at some specific scenarios and wrap up with a couple of capabilities that are just emerging that can be used in the future. Why Build Enterprise Smartphone Applications So what are some of the ways that you can leverage smartphone technology to gain efficiency in your business or a clients business. There are a few major areas that I have seen mobile platforms being an advantage to. Your mobile sales force is a key candidate for leveraging smartphone apps.  They can visit clients in their retail location and place orders on site. It is a more personal approach which can gain you customer loyalty.  A sales person may also gather information about the way a client does business or who their target market is. This allows them you to focus marketing information or build customized support for your customer. You may also have need to track physical inventory in a store. This is something that has historically been done with laser scanners, but with the camera capabilities in today's phones and tablets it is possible to use more general multi-purpose devices.  This can save costs on both hardware and telecommunication contracts. Delivery verification is another area that historically has been the domain of specialized devices but can now be accomplished with smartphones.  This also reduces costs because it is also used for communicating with the driver and other operations.  Add to that the navigation capability of smartphones and you can see how the return on investment increases. Executives are always on the go. They spend most of their time in meetings and yet they need access to decision making information at their finger tips. With a smartphone app they can get alerts when major sales are closed or critical accounting process are completed that may need their attention. They can also answer questions by instantly pulling up BI reports. I have often heard operations support people say that they need things like VPN and RDP from their phones. If they can also have notifications of outages or critical support requests they can be react to situations without needing to be tied to their desks. These are all valid reasons to need smartphone applications.  In the next installment I will discuss platforms and features. del.icio.us Tags: Smartphones,Enterprise Smartphone Apps,Architecture

  Read the article

• Server cannot set status after HTTP headers have been sent IIS7.5

  - by marcinn

  Hi, Sometimes I get exception in my production environment: Process information Process ID: 3832 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information Exception type: System.Web.HttpException Exception message: Server cannot set status after HTTP headers have been sent. Request information Request URL: http://www.myulr.pl/logon Request path: /logon User host address: 10.11.9.1 User: user001 Is authenticated: True Authentication Type: Forms Thread account name: NT AUTHORITY\NETWORK SERVICE Thread information Thread ID: 10 Thread account name: NT AUTHORITY\NETWORK SERVICE Is impersonating: False Stack trace: at System.Web.HttpResponse.set_StatusCode(Int32 value) at System.Web.HttpResponseWrapper.set_StatusCode(Int32 value) at System.Web.Mvc.HandleErrorAttribute.OnException(ExceptionContext filterContext) at System.Web.Mvc.ControllerActionInvoker.InvokeExceptionFilters(ControllerContext controllerContext, IList(1) filters, Exception exception) at System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) at System.Web.Mvc.Controller.ExecuteCore() at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__4() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass1.<MakeVoidDelegate>b__0() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass8(1).<BeginSynchronous>b__7(IAsyncResult _) at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult(1).End() at System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& ompletedSynchronously) I didn't noticed this error on my test environment what should I check? I am using ASP.NET MVC 2 (Release Candidate 2)

  Read the article

• SCons does not clean all files

  - by meowsqueak

  I have a file system containing directories of "builds", each of which contains a file called "build-info.xml". However some of the builds happened before the build script generated "build-info.xml" so in that case I have a somewhat non-trivial SCons SConstruct that is used to generate a skeleton build-info.xml so that it can be used as a dependency for further rules. I.e.: for each directory: if build-info.xml already exists, do nothing. More importantly, do not remove it on a 'scons --clean'. if build-info.xml does not exist, generate a skeleton one instead - build-info.xml has no dependencies on any other files - the skeleton is essentially minimal defaults. during a --clean, remove build-info.xml if it was generated, otherwise leave it be. My SConstruct looks something like this: def generate_actions_BuildInfoXML(source, target, env, for_signature): cmd = "python '%s/bin/create-build-info-xml.py' --version $VERSION --path . --output ${TARGET.file}" % (Dir('#').abspath,) return cmd bld = Builder(generator = generate_actions_BuildInfoXML, chdir = 1) env.Append(BUILDERS = { "BuildInfoXML" : bld }) ... # VERSION = some arbitrary string, not important here # path = filesystem path, set elsewhere build_info_xml = "%s/build-info.xml" % (path,) if not os.path.exists(build_info_xml): env.BuildInfoXML(build_info_xml, None, VERSION = build) My problem is that 'scons --clean' does not remove the generated build-info.xml files. I played around with env.Clean(t, build_info_xml) within the 'if' but I was unable to get this to work - mainly because I could not work out what to assign to 't' - I want a generated build-info.xml to be cleaned unconditionally, rather than based on the cleaning of another target, and I wasn't able to get this to work. If I tried a simple env.Clean(None, "build_info_xml") after but outside the 'if' I found that SCons would clean every single build-info.xml file including those that weren't generated. Not good either. What I'd like to know is how SCons goes about determining which files should be cleaned and which should not. Is there something funny about the way I've used a generator function that prevents SCons from recording this target as a Clean candidate?

  Read the article

• how to tackle this combinatorial algorithm problem

  - by Andrew Bullock

  I have N people who must each take T exams. Each exam takes "some" time, e.g. 30 min (no such thing as finishing early). Exams must be performed in front of an examiner. I need to schedule each person to take each exam in front of an examiner within an overall time period, using the minimum number of examiners for the minimum amount of time (i.e. no examiners idle) There are the following restrictions: No person can be in 2 places at once each person must take each exam once noone should be examined by the same examiner twice I realise that an optimal solution is probably NP-Complete, and that I'm probably best off using a genetic algorithm to obtain a best estimate (similar to this? http://stackoverflow.com/questions/184195/seating-plan-software-recommendations-does-such-a-beast-even-exist). I'm comfortable with how genetic algorithms work, what i'm struggling with is how to model the problem programatically such that i CAN manipulate the parameters genetically.. If each exam took the same amount of time, then i'd divide the time period up into these lengths, and simply create a matrix of time slots vs examiners and drop the candidates in. However because the times of each test are not necessarily the same, i'm a bit lost on how to approach this. currently im doing this: make a list of all "tests" which need to take place, between every candidate and exam start with as many examiners as there are tests repeatedly loop over all examiners, for each one: find an unscheduled test which is eligible for the examiner (based on the restrictions) continue until all tests that can be scheduled, are if there are any unscheduled tests, increment the number of examiners and start again. i'm looking for better suggestions on how to approach this, as it feels rather crude currently.

  Read the article

• GWT carousel widget

  - by Nils

  Hello, I'm currently working on a GWT project, in which I need to use a "carousel" widget. The carousel widget is supposed to display pieces of information and 2 arrows - when the user clicks on one of the arrow, the content is moved with an animation and replaced with new content. I've been looking through the available widget libs, but the "carousel" widget does not seem to be that available. The only real candidate I found is the gwt-yui-carousel widget (see link below), but this seems to be an overload of ressources - though it does almost exactly what I need, but instead of displaying simple images, I'll have to display, in MVP terms, a view/presenter. Here is the widget running : http://gwt-yui-carousel.googlecode.com/svn/trunk/www/com.gwtyuicarousel.javascriptload.JavaScriptLoad/javascriptload.html (coming from here : http://code.google.com/p/gwt-yui-carousel/ ). Is there a better carousel widget available that I would not know of ? Or should I extend an existing one to create the desired effect ? Would you recommend to use the gwt-yui-carousel (I don't think so) ? If there is no better option, do you think that it would be a good idea to create the widget myself ? Note that I think that the key thing is, here, that I'll have to display presenter/views, which will fetch data in DataBase on arrow clicks and so on - so a customisation of an existing widget would be required, or the chosen widget should be able to display a list of GWT Widgets. Again I don't think that I can use one of the existing usual carousel widgets, since those are not "gwt-oriented" and could not support view/presenters and all this gwt stuff ;) Any answer would be greatly appreciated :) Best regards, Nils

  Read the article

• Injecting Mockito mocks into a Spring bean

  - by teabot

  I would like to inject a Mockito mock object into a Spring (3+) bean for the purposes of unit testing with JUnit. My bean dependencies are currently injected by using the @Autowired annotation on private member fields. I have considered using ReflectionTestUtils.setField but the bean instance that I wish to inject is actually a proxy and hence does not declare the private member fields of the target class. I do not wish to create a public setter to the dependency as I will then be modifying my interface purely for the purposes of testing. I have followed some advice given by the Spring community but the mock does not get created and the auto-wiring fails: <bean id="dao" class="org.mockito.Mockito" factory-method="mock"> <constructor-arg value="com.package.Dao" /> </bean> The error I currently encounter is as follows: ... Caused by: org...NoSuchBeanDefinitionException: No matching bean of type [com.package.Dao] found for dependency: expected at least 1 bean which qualifies as autowire candidate for this dependency. Dependency annotations: { @org...Autowired(required=true), @org...Qualifier(value=dao) } at org...DefaultListableBeanFactory.raiseNoSuchBeanDefinitionException(D...y.java:901) at org...DefaultListableBeanFactory.doResolveDependency(D...y.java:770) If I set the constructor-arg value to something invalid no error occurs when starting the application context.

  Read the article

• Spring 3 DI using generic DAO interface

  - by Peders

  I'm trying to use @Autowired annotation with my generic Dao interface like this: public interface DaoContainer<E extends DomainObject> { public int numberOfItems(); // Other methods omitted for brevity } I use this interface in my Controller in following fashion: @Configurable public class HelloWorld { @Autowired private DaoContainer<Notification> notificationContainer; @Autowired private DaoContainer<User> userContainer; // Implementation omitted for brevity } I've configured my application context with following configuration <context:spring-configured /> <context:component-scan base-package="com.organization.sample"> <context:exclude-filter expression="org.springframework.stereotype.Controller" type="annotation" /> </context:component-scan> <tx:annotation-driven /> This works only partially, since Spring creates and injects only one instance of my DaoContainer, namely DaoContainer. In other words, if I ask userContainer.numberOfItems(); I get the number of notificationContainer.numberOfItems() I've tried to use strongly typed interfaces to mark the correct implementation like this: public interface NotificationContainer extends DaoContainer<Notification> { } public interface UserContainer extends DaoContainer<User> { } And then used these interfaces like this: @Configurable public class HelloWorld { @Autowired private NotificationContainer notificationContainer; @Autowired private UserContainer userContainer; // Implementation omitted... } Sadly this fails to BeanCreationException: org.springframework.beans.factory.BeanCreationException: Could not autowire field: private com.organization.sample.dao.NotificationContainer com.organization.sample.HelloWorld.notificationContainer; nested exception is org.springframework.beans.factory.NoSuchBeanDefinitionException: No matching bean of type [com.organization.sample.NotificationContainer] found for dependency: expected at least 1 bean which qualifies as autowire candidate for this dependency. Dependency annotations: {@org.springframework.beans.factory.annotation.Autowired(required=true)} Now, I'm a little confused how should I proceed or is using multiple Dao's even possible. Any help would be greatly appreciated :)

  Read the article

• iPad Safari's mapping of mouse events to touch events in image-maps

  - by Tim

  My website makes extensive use of image-maps. The images are of pages from a medieval manuscript. The mouseOver event of the AREA tags has a tooltip attached to it, which displays a modern typographic transcription of the ancient script for the line the mouse is hovering over. I just checked my website out on the iPad at the Apple store. The iPad is many respects a joy to use, however, I am wondering about Apple's mapping of the mouseEvents to the finger-touch events. Apple probably had a good reason for doing things as they did, but their choices seem counterintuitive an overly complicated to me. Specifically, the iPad Safari browser clearly was responding to both fingerDown and fingerTap, and in different ways. When I tapped an area of the image-map, the tooltip wired to the mouse-over event pf the AREA tag was displayed, and remained visible until I tapped somewhere else. When I held my finger down on an area of the image-map, the area changed color. So if iPad Safari detects a mouseOver eventhandler, it executes the mouseOver code and apparently prevents the "click" event from propagating, so that if you also have something wired to the click event, it doesn't work? Is that right? But more importantly, why isn't fingerDown the iPad-Safari counterpart for mouseOver? FingerDown seems a more likely candidate than Tap when mapping the mousePOver event. I would have expected things to be mapped in this way: MouseClick : FingerTap (i.e. finger down and then immediately up) MouseOver : FingerDown (finger down and stays on the spot) If Apple had treated fingerDown as the counterpart to mouseOver, then the tooltip could be displayed upon FingerDown and made invisible again on fingerUp, which would be the counterpart to mouseOut. Perhaps someone could enlighten me about the thinking process that led Apple to these particular mouse-to-touch event-mappings? Thanks

  Read the article

• Automatically calling OnDetaching() for Silverlight Behaviors

  - by Dan Auclair

  I am using several Blend behaviors and triggers on a silverlight control. I am wondering if there is any mechanism for automatically detaching or ensuring that OnDetaching() is called for a behavior or trigger when the control is no longer being used (i.e. removed from the visual tree). My problem is that there is a managed memory leak with the control because of one of the behaviors. The behavior subscribes to an event on some long-lived object in the OnAttached() override and should be unsubscribing to that event in the OnDetaching() override so that it can become a candidate for garbage collection. However, OnDetaching() never seems to be getting called when I remove the control from the visual tree... the only way I can get it to happen is by explicit detaching the behavior BEFORE removing the control and then it is properly garbage collected. Right now my only solution was to create a public method in the code-behind for the control that can go through and detach any known behaviors that would cause garbage collection problems. It would be up to the client code to know to call this before removing the control from the panel. I don't really like this approach, so I am looking for some automatic way of doing this that I am overlooking or a better suggestion. public void DetachBehaviors() { foreach (var behavior in Interaction.GetBehaviors(this.LayoutRoot)) { behavior.Detach(); } //... //continue detaching all known problematic behaviors.... }

  Read the article

• Does RabbitMq do round-robin from the exchange to the queues

  - by Lancelot

  Hi, I am currently evaluating message queue systems and RabbitMq seems like a good candidate, so I'm digging a little more into it. To give a little context I'm looking to have something like one exchange load balancing the message publishing to multiple queues. I don't want to replicate the messages, so a fanout exchange is not an option. Also the reason I'm thinking of having multiple queues vs one queue handling the round-robin w/ the consumers, is that I don't want our single point of failure to be at the queue level. Sounds like I could add some logic on the publisher side to simulate that behavior by editing the routing key and having the appropriate bindings in place. But that's kind of a passive approach that wouldn't take the pace of the message consumption on each queue into account, potentially leading to fill up one queue if the consumer applications for that queue are dead. I was looking for a more pro-active way from the exchange entity side, that would decide where to send the next message based on each queue size or something of that nature. I read about Alice and the available RESTful APIs but that seems kind of a heavy duty solution to implement fast routing decisions. Anyone knows if round-robin between the exchange the queues is feasible w/ RabbitMQ then? Thanks.

  Read the article

• nested iterator errors

  - by Sean

  //arrayList.h #include<iostream> #include<sstream> #include<string> #include<algorithm> #include<iterator> using namespace std; template<class T> class arrayList{ public: // constructor, copy constructor and destructor arrayList(int initialCapacity = 10); arrayList(const arrayList<T>&); ~arrayList() { delete[] element; } // ADT methods bool empty() const { return listSize == 0; } int size() const { return listSize; } T& get(int theIndex) const; int indexOf(const T& theElement) const; void erase(int theIndex); void insert(int theIndex, const T& theElement); void output(ostream& out) const; // additional method int capacity() const { return arrayLength; } void reverse(); // new defined // iterators to start and end of list class iterator; class seamlessPointer; seamlessPointer begin() { return seamlessPointer(element); } seamlessPointer end() { return seamlessPointer(element + listSize); } // iterator for arrayList class iterator { public: // typedefs required by C++ for a bidirectional iterator typedef bidirectional_iterator_tag iterator_category; typedef T value_type; typedef ptrdiff_t difference_type; typedef T* pointer; typedef T& reference; // constructor iterator(T* thePosition = 0) { position = thePosition; } // dereferencing operators T& operator*() const { return *position; } T* operator->() const { return position; } // increment iterator& operator++() // preincrement { ++position; return *this; } iterator operator++(int) // postincrement { iterator old = *this; ++position; return old; } // decrement iterator& operator--() // predecrement { --position; return *this; } iterator operator--(int) // postdecrement { iterator old = *this; --position; return old; } // equality testing bool operator!=(const iterator right) const { return position != right.position; } bool operator==(const iterator right) const { return position == right.position; } protected: T* position; }; // end of iterator class class seamlessPointer: public arrayList<T>::iterator { // constructor seamlessPointer(T *thePosition) { iterator::position = thePosition; } //arithmetic operators seamlessPointer & operator+(int n) { arrayList<T>::iterator::position += n; return *this; } seamlessPointer & operator+=(int n) { arrayList<T>::iterator::position += n; return *this; } seamlessPointer & operator-(int n) { arrayList<T>::iterator::position -= n; return *this; } seamlessPointer & operator-=(int n) { arrayList<T>::iterator::position -= n; return *this; } T& operator[](int n) { return arrayList<T>::iterator::position[n]; } bool operator<(seamlessPointer &rhs) { if(int(arrayList<T>::iterator::position - rhs.position) < 0) return true; return false; } bool operator<=(seamlessPointer & rhs) { if (int(arrayList<T>::iterator::position - rhs.position) <= 0) return true; return false; } bool operator >(seamlessPointer & rhs) { if (int(arrayList<T>::iterator::position - rhs.position) > 0) return true; return false; } bool operator >=(seamlessPointer &rhs) { if (int(arrayList<T>::iterator::position - rhs.position) >= 0) return true; return false; } }; protected: // additional members of arrayList void checkIndex(int theIndex) const; // throw illegalIndex if theIndex invalid T* element; // 1D array to hold list elements int arrayLength; // capacity of the 1D array int listSize; // number of elements in list }; #endif //main.cpp #include<iostream> #include"arrayList.h" #include<fstream> #include<algorithm> #include<string> using namespace std; bool compare_nocase (string first, string second) { unsigned int i=0; while ( (i<first.length()) && (i<second.length()) ) { if (tolower(first[i])<tolower(second[i])) return true; else if (tolower(first[i])>tolower(second[i])) return false; ++i; } if (first.length()<second.length()) return true; else return false; } int main() { ifstream fin; ofstream fout; string str; arrayList<string> dict; fin.open("dictionary"); if (!fin.good()) { cout << "Unable to open file" << endl; return 1; } int k=0; while(getline(fin,str)) { dict.insert(k,str); // cout<<dict.get(k)<<endl; k++; } //sort the array sort(dict.begin, dict.end(),compare_nocase); fout.open("sortedDictionary"); if (!fout.good()) { cout << "Cannot create file" << endl; return 1; } dict.output(fout); fin.close(); return 0; } Two errors are: ..\src\test.cpp: In function 'int main()': ..\src\test.cpp:50:44: error: no matching function for call to 'sort(<unresolved overloaded function type>, arrayList<std::basic_string<char> >::seamlessPointer, bool (&)(std::string, std::string))' ..\src\/arrayList.h: In member function 'arrayList<T>::seamlessPointer arrayList<T>::end() [with T = std::basic_string<char>]': ..\src\test.cpp:50:28: instantiated from here ..\src\/arrayList.h:114:3: error: 'arrayList<T>::seamlessPointer::seamlessPointer(T*) [with T = std::basic_string<char>]' is private ..\src\/arrayList.h:49:44: error: within this context Why do I get these errors? Update I add public: in the seamlessPointer class and change begin to begin() Then I got the following errors: ..\hw3prob2.cpp:50:46: instantiated from here c:\wascana\mingw\bin\../lib/gcc/mingw32/4.5.0/include/c++/bits/stl_algo.h:5250:4: error: no match for 'operator-' in '__last - __first' ..\/arrayList.h:129:21: note: candidate is: arrayList<T>::seamlessPointer& arrayList<T>::seamlessPointer::operator-(int) [with T = std::basic_string<char>, arrayList<T>::seamlessPointer = arrayList<std::basic_string<char> >::seamlessPointer] c:\wascana\mingw\bin\../lib/gcc/mingw32/4.5.0/include/c++/bits/stl_algo.h:5252:4: instantiated from 'void std::sort(_RAIter, _RAIter, _Compare) [with _RAIter = arrayList<std::basic_string<char> >::seamlessPointer, _Compare = bool (*)(std::basic_string<char>, std::basic_string<char>)]' ..\hw3prob2.cpp:50:46: instantiated from here c:\wascana\mingw\bin\../lib/gcc/mingw32/4.5.0/include/c++/bits/stl_algo.h:2190:7: error: no match for 'operator-' in '__last - __first' ..\/arrayList.h:129:21: note: candidate is: arrayList<T>::seamlessPointer& arrayList<T>::seamlessPointer::operator-(int) [with T = std::basic_string<char>, arrayList<T>::seamlessPointer = arrayList<std::basic_string<char> >::seamlessPointer] Then I add operator -() in the seamlessPointer class ptrdiff_t operator -(seamlessPointer &rhs) { return (arrayList<T>::iterator::position - rhs.position); } Then I compile successfully. But when I run it, I found memeory can not read error. I debug and step into and found the error happens in stl function template<typename _RandomAccessIterator, typename _Distance, typename _Tp, typename _Compare> void __adjust_heap(_RandomAccessIterator __first, _Distance __holeIndex, _Distance __len, _Tp __value, _Compare __comp) { const _Distance __topIndex = __holeIndex; _Distance __secondChild = __holeIndex; while (__secondChild < (__len - 1) / 2) { __secondChild = 2 * (__secondChild + 1); if (__comp(*(__first + __secondChild), *(__first + (__secondChild - 1)))) __secondChild--; *(__first + __holeIndex) = _GLIBCXX_MOVE(*(__first + __secondChild)); ////// stop here __holeIndex = __secondChild; } Of course, there must be something wrong with the customized operators of iterator. Does anyone know the possible reason? Thank you.

  Read the article

• Asp.Net MVC Tutorial Unit Tests

  - by Nicholas

  I am working through Steve Sanderson's book Pro ASP.NET MVC Framework and I having some issues with two unit tests which produce errors. In the example below it tests the CheckOut ViewResult: [AcceptVerbs(HttpVerbs.Post)] public ViewResult CheckOut(Cart cart, FormCollection form) { // Empty carts can't be checked out if (cart.Lines.Count == 0) { ModelState.AddModelError("Cart", "Sorry, your cart is empty!"); return View(); } // Invoke model binding manually if (TryUpdateModel(cart.ShippingDetails, form.ToValueProvider())) { orderSubmitter.SubmitOrder(cart); cart.Clear(); return View("Completed"); } else // Something was invalid return View(); } with the following unit test [Test] public void Submitting_Empty_Shipping_Details_Displays_Default_View_With_Error() { // Arrange CartController controller = new CartController(null, null); Cart cart = new Cart(); cart.AddItem(new Product(), 1); // Act var result = controller.CheckOut(cart, new FormCollection { { "Name", "" } }); // Assert Assert.IsEmpty(result.ViewName); Assert.IsFalse(result.ViewData.ModelState.IsValid); } I have resolved any issues surrounding 'TryUpdateModel' by upgrading to ASP.NET MVC 2 (Release Candidate 2) and the website runs as expected. The associated error messages are: *Tests.CartControllerTests.Submitting_Empty_Shipping_Details_Displays_Default_View_With_Error: System.ArgumentNullException : Value cannot be null. Parameter name: controllerContext* and the more detailed at System.Web.Mvc.ModelValidator..ctor(ModelMetadata metadata, ControllerContext controllerContext) at System.Web.Mvc.DefaultModelBinder.OnModelUpdated(ControllerContext controllerContext, ModelBindingContext bindingContext) at System.Web.Mvc.DefaultModelBinder.BindComplexModel(ControllerContext controllerContext, ModelBindingContext bindingContext) at System.Web.Mvc.Controller.TryUpdateModel[TModel](TModel model, String prefix, String[] includeProperties, String[] excludeProperties, IValueProvider valueProvider) at System.Web.Mvc.Controller.TryUpdateModel[TModel](TModel model, IValueProvider valueProvider) at WebUI.Controllers.CartController.CheckOut(Cart cart, FormCollection form) Has anyone run into a similar issue or indeed got the test to pass?

  Read the article

• How would you answer Joel's sample programming questions?

  - by Khorkrak

  I recently interviewed a candidate for a new position here. I wish though that I'd read Joel's Guerrilla Guide to Interviewing prior to that interview - naturally I happened upon it the night afterwards :P http://www.joelonsoftware.com/articles/GuerrillaInterviewing3.html So I tried answering the easy questions myself - yeah I used the python interpreter to type stuff in and tested the results a bit - I didn't look up any solutions beforehand though and I also thought about how long it took me to come up with answers for each one and what I'd look for the next time I interview someone. I'd let them type stuff into the interpreter and see how did used python's introspection capabilities too to find out things like what's the re module's method for building a regex etc. Here are my answers - these are in python of course - what are yours in your favourite language? Do you see any issues with the answers I came up with - i.e. how could they be improved upon - what did I miss? Joel's example questions: Write a function that determines if a string starts with an upper-case letter A-Z. import re upper_regex = re.compile("^[A-Z]") def starts_with_upper(text): return upper_regex.match(text) is not None Write a function that determines the area of a circle given the radius. from math import pi def area(radius): return pi * radius**2 Add up all the values in an array. sum([1, 2, 3, 4, 5]) Harder Question: Write an example of a recursive function - so how about the classic factorial one: def factorial(num): if num > 1: return num * factorial(num - 1) else: return 1

  Read the article

• Heuristic to identify if a series of 4 bytes chunks of data are integers or floats

  - by flint

  What's the best heuristic I can use to identify whether a chunk of X 4-bytes are integers or floats? A human can do this easily, but I wanted to do it programmatically. I realize that since every combination of bits will result in a valid integer and (almost?) all of them will also result in a valid float, there is no way to know for sure. But I still would like to identify the most likely candidate (which will virtually always be correct; or at least, a human can do it). For example, let's take a series of 4-bytes raw data and print them as integers first and then as floats: 1 1.4013e-45 10 1.4013e-44 44 6.16571e-44 5000 7.00649e-42 1024 1.43493e-42 0 0 0 0 -5 -nan 11 1.54143e-44 Obviously they will be integers. Now, another example: 1065353216 1 1084227584 5 1085276160 5.5 1068149391 1.33333 1083179008 4.5 1120403456 100 0 0 -1110651699 -0.1 1195593728 50000 These will obviously be floats. PS: I'm using C++ but you can answer in any language, pseudo code or just in english.

  Read the article

• SQL Server CLR stored procedures in data processing tasks - good or evil?

  - by Gart

  In short - is it a good design solution to implement most of the business logic in CLR stored procedures? I have read much about them recently but I can't figure out when they should be used, what are the best practices, are they good enough or not. For example, my business application needs to parse a large fixed-length text file, extract some numbers from each line in the file, according to these numbers apply some complex business rules (involving regex matching, pattern matching against data from many tables in the database and such), and as a result of this calculation update records in the database. There is also a GUI for the user to select the file, view the results, etc. This application seems to be a good candidate to implement the classic 3-tier architecture: the Data Layer, the Logic Layer, and the GUI layer. The Data Layer would access the database The Logic Layer would run as a WCF service and implement the business rules, interacting with the Data Layer The GUI Layer would be a means of communication between the Logic Layer and the User. Now, thinking of this design, I can see that most of the business rules may be implemented in a SQL CLR and stored in SQL Server. I might store all my raw data in the database, run the processing there, and get the results. I see some advantages and disadvantages of this solution: Pros: The business logic runs close to the data, meaning less network traffic. Process all data at once, possibly utilizing parallelizm and optimal execution plan. Cons: Scattering of the business logic: some part is here, some part is there. Questionable design solution, may encounter unknown problems. Difficult to implement a progress indicator for the processing task. I would like to hear all your opinions about SQL CLR. Does anybody use it in production? Are there any problems with such design? Is it a good thing?

  Read the article

• Hiring a programmer: looking for the "right attitude"

  - by Totophil

  It's actually two questions in one: What is the right attitude for a programmer? How do you (or would you) look for one when interviewing or during hiring process? Please note this question is not about personality or traits of a candidate, it is about their attitude towards what they do for living. This is also not about reverse of programmers pet peeves. The question has been made community wiki, since I am interested in a good answer rather than reputation. I disagree that the question is purely subjective and just a matter of opinion: clearly some attitudes make a better programmer than others. Consecutively, there might quite possibly exist an attitude that is common to the most of the better programmers. Update: After some deliberation I came up with the following attitude measurement scales: identifies themselves with the job ? fully detached perceives code as a collection of concepts ? sees code as a sequence of steps thinks of creating software as an art ? takes 100% rational approach to design and development Answers that include some sort of a comment on the appropriateness of these scales are greatly appreciated. Definition of "attitude": a complex mental state involving beliefs and feelings and values and dispositions to act in certain ways; "he had the attitude that work was fun" The question came as a result of some reflection on the top voted answer to "How do you ensure code quality?" here on Stack Overflow.

  Read the article

• Curve fitting: Find the smoothest function that satisfies a list of constraints.

  - by dreeves

  Consider the set of non-decreasing surjective (onto) functions from (-inf,inf) to [0,1]. (Typical CDFs satisfy this property.) In other words, for any real number x, 0 <= f(x) <= 1. The logistic function is perhaps the most well-known example. We are now given some constraints in the form of a list of x-values and for each x-value, a pair of y-values that the function must lie between. We can represent that as a list of {x,ymin,ymax} triples such as constraints = {{0, 0, 0}, {1, 0.00311936, 0.00416369}, {2, 0.0847077, 0.109064}, {3, 0.272142, 0.354692}, {4, 0.53198, 0.646113}, {5, 0.623413, 0.743102}, {6, 0.744714, 0.905966}} Graphically that looks like this: We now seek a curve that respects those constraints. For example: Let's first try a simple interpolation through the midpoints of the constraints: mids = ({#1, Mean[{#2,#3}]}&) @@@ constraints f = Interpolation[mids, InterpolationOrder->0] Plotted, f looks like this: That function is not surjective. Also, we'd like it to be smoother. We can increase the interpolation order but now it violates the constraint that its range is [0,1]: The goal, then, is to find the smoothest function that satisfies the constraints: Non-decreasing. Tends to 0 as x approaches negative infinity and tends to 1 as x approaches infinity. Passes through a given list of y-error-bars. The first example I plotted above seems to be a good candidate but I did that with Mathematica's FindFit function assuming a lognormal CDF. That works well in this specific example but in general there need not be a lognormal CDF that satisfies the constraints.

  Read the article

• CSS Parser - Insert mtimes

  - by brad

  What command line tool can I use to automatically insert mtimes into urls in my css files for the purposes of breaking the cache? /* before */ .example { background: url(example.jpg); } /* after */ .example { background: url(example.jpg?1271298451); } Also, I would like this tool to spit out the latest mtime as the css files mtime. (If the css file is still cached then the new urls will not get to the client.) In searching the web, I have found very few tools that can do this. I am even considering rolling my own, but have found very little in the way of css parsers that are actively maintained. A candidate should be: fast (I don't want to wait 30 seconds on deployment) command line accessible (something like "cat foo.css bar.css | cssmtime out.css") What I've found so Far yui compressor - initially I thought I would extend the yui compressor to do this, but found that it is implemented as a bunch of regex's and not a parser. csstidy - last release was in 2007 and development has been suspended, but does have an option for inserting mtimes (also written in php, something I have no experience in) cssutils - python sac implementation - seems to be actively maintained, but also seems like overkill for my needs. Also, written in python which I have experience with csspool - ruby sac implementation - I don't know much ruby, but would like to learn other sac implementations - There are several java implementations, and a c implementation neither of which I know much about What's your experience? Have you used any of these libraries? Was the experience positive? Would you recommend I go with them for my purposes?

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >