Search Results

Search found 4593 results on 184 pages for 'charles 22'.

Page 30/184 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• What does "link to unknown" mean?

  - by Question Overflow

  I just upgraded my server to Fedora 17 which made a switch of my bootloader from GRUB Legacy to GRUB2. There are two symbolic links in the /etc folder that points to the files grub.conf and grub.cfg in /boot/grub and /boot/grub2 respectively. Though the targets seem correct, the link icons are displaying an X status which seems to indicate that the links are broken. Upon right-clicking the property type, it states "link to unknown". The file size of the link corresponds exactly with the file size of the target file, so, why does the links appear to be broken? The image of the link icons: As requested, the following are the outputs from the commands: $ ls -l /etc/grub.conf lrwxrwxrwx. 1 root root 22 Jul 14 2011 /etc/grub.conf -> ../boot/grub/grub.conf $ ls -l /etc/grub2.cfg lrwxrwxrwx. 1 root root 22 Dec 10 18:57 /etc/grub2.cfg -> ../boot/grub2/grub.cfg

  Read the article

• How is virtual machine port opening works

  - by Xianlin

  I have a question regarding VM port. Say I have a Virtual Machine and a Host Machine. The opening ports on Host are 80, 22, 443 only. if I opened ports 80, 22, 443 VM it should be working. However if I opened port 21 on VM, will it work? If it works, does it mean the port 21 on Host is opened also? My understanding is that the network traffic goes from VM's virtual network adapter to Host's physical network adapter. So the ports on these 2 network adapters should match. Am I correct to say this?

  Read the article

• puppet master REST API returns 403 when running under passenger works when master runs from command line

  - by Anadi Misra

  I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work?

  Read the article

• rewrite rule does not rewrite url as expected

  - by user1708687

  I have a problem with a CMS website, that normally generates readable urls. Sometimes it happens that navigation links are shown as www.domain.com/22, which results in an error, instead of www.domain.com/contact. I have not found a solution for this yet, but the page is working if the url is www.domain.com/index.php?id=22. Therefore, I'm trying to rewrite www.domain.com/22 to www.domain.com/index.php?id=22 and I have used this rewrite rule: RewriteRule ^([1-9][0-9]*)$ index.php?id=$1 [NC] I tested it using http://htaccess.madewithlove.be and here it shows the correct result, but on the website no rewrite is happening.

  Read the article

• IPSec tunnel between FortiGate and iPhone / iOS - Works except for DNS / Wins

  - by user57988

  I have configured my Fortigate with a new VPN IPSec tunnel to allow the iOS Cisco client to connect. That works fine. I can RDP to my servers, browse to my servers via IP address, etc. But, the iPhone does not resolve my internal IP addresses. I have added the DNS servers that serve addresses for my internal users, as well as the WINS servers, but the iPhone acts like it doesn't see them at all. config vpn ipsec phase1-interface edit "iPhone_VPN" set type dynamic set interface "wan1" set dhgrp 2 set proposal 3des-sha1 3des-md5 set xauthtype auto set mode-cfg enable set authusrgrp "iPhone_VPN_Users" set ipv4-start-ip 10.10.99.100 set ipv4-end-ip 10.10.99.199 set ipv4-netmask 255.255.0.0 set ipv4-dns-server1 10.10.2.1 set ipv4-dns-server2 10.22.1.80 set ipv4-wins-server1 10.10.2.1 set ipv4-wins-server2 10.22.1.80 set ipv4-split-include "Dialup_VPN_Networks" set psksecret ENC xxxxx next end For whatever reason, as far as I can tell, the iPhone does not 'see' the DNS or WINS entries. I don't know how to check it...

  Read the article

• In ufw is there any way to disable logging for a particular rule?

  - by thomasrutter

  I am using UFW with a default logging policy of "low". I would like to keep this logging on for the default deny action, but disable it for a particular IP address only. So I'd like to create one particular new rule that doesn't have logging. Is there a way to achieve this? I have a rather uncomplicated ufw setup so far, like this: Status: active Logging: on (low) Default: deny (incoming), allow (outgoing) New profiles: skip To Action From -- ------ ---- 22/tcp LIMIT Anywhere 80/tcp ALLOW Anywhere 443/tcp ALLOW Anywhere 22/tcp ALLOW Anywhere (v6) 80/tcp ALLOW Anywhere (v6) 443/tcp ALLOW Anywhere (v6)

  Read the article

• Linux policy routing - packets not coming back

  - by Bugsik

  i am trying to set up policy routing on my home server. My network looks like this: Host routed VPN gateway Internet link through VPN 192.168.0.35/24 ---> 192.168.0.5/24 ---> 192.168.0.1 DSL router 10.200.2.235/22 .... .... 10.200.0.1 VPN server The traffic from 192.168.0.32/27 should be and is routed through VPN. I wanted to define some routing policies to route some traffic from 192.168.0.5 through VPN as well - for start - from user with uid 2000. Policy routing is done using iptables mark target and ip rule fwmark. The problem: When connecting using user 2000 from 192.168.0.5 tcpdump shows outgoing packets, but nothing comes back. Traffic from 192.168.0.35 works fine (here I am not using fwmark but src policy). Here is my VPN gateway setup: # uname -a Linux placebo 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:49:02 UTC 2012 i686 i686 i386 GNU/Linux # iptables -V iptables v1.4.12 # ip -V ip utility, iproute2-ss111117 IPtables rules (all policies in table filter are ACCEPT) # iptables -t mangle -nvL Chain PREROUTING (policy ACCEPT 770K packets, 314M bytes) pkts bytes target prot opt in out source destination Chain INPUT (policy ACCEPT 767K packets, 312M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 5520 packets, 1920K bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 782K packets, 901M bytes) pkts bytes target prot opt in out source destination 74 4707 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner UID match 2000 MARK set 0x3 Chain POSTROUTING (policy ACCEPT 788K packets, 903M bytes) pkts bytes target prot opt in out source destination # iptables -t nat -nvL Chain PREROUTING (policy ACCEPT 996 packets, 51172 bytes) pkts bytes target prot opt in out source destination Chain INPUT (policy ACCEPT 7 packets, 432 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 1364 packets, 112K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 2302 packets, 160K bytes) pkts bytes target prot opt in out source destination 119 7588 MASQUERADE all -- * vpn 0.0.0.0/0 0.0.0.0/0 Routing: # ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master lan state UNKNOWN qlen 1000 link/ether 00:40:63:f9:c3:8f brd ff:ff:ff:ff:ff:ff valid_lft forever preferred_lft forever 3: lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:40:63:f9:c3:8f brd ff:ff:ff:ff:ff:ff inet 192.168.0.5/24 brd 192.168.0.255 scope global lan inet6 fe80::240:63ff:fef9:c38f/64 scope link valid_lft forever preferred_lft forever 4: vpn: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 link/none inet 10.200.2.235/22 brd 10.200.3.255 scope global vpn # ip rule show 0: from all lookup local 32764: from all fwmark 0x3 lookup VPN 32765: from 192.168.0.32/27 lookup VPN 32766: from all lookup main 32767: from all lookup default # ip route show table VPN default via 10.200.0.1 dev vpn 10.200.0.0/22 dev vpn proto kernel scope link src 10.200.2.235 192.168.0.0/24 dev lan proto kernel scope link src 192.168.0.5 # ip route show default via 192.168.0.1 dev lan metric 100 10.200.0.0/22 dev vpn proto kernel scope link src 10.200.2.235 192.168.0.0/24 dev lan proto kernel scope link src 192.168.0.5 TCP dump showing no traffic coming back when connection is made from 192.168.0.5 user 2000 # tcpdump -i vpn tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vpn, link-type RAW (Raw IP), capture size 65535 bytes ### Traffic from user 2000 on 192.168.0.5 ### 10:19:05.629985 IP 10.200.2.235.37291 > 10.100-78-194.akamai.com.http: Flags [S], seq 2868799562, win 14600, options [mss 1460,sackOK,TS val 6887764 ecr 0,nop,wscale 4], length 0 10:19:21.678001 IP 10.200.2.235.37291 > 10.100-78-194.akamai.com.http: Flags [S], seq 2868799562, win 14600, options [mss 1460,sackOK,TS val 6891776 ecr 0,nop,wscale 4], length 0 ### Traffic from 192.168.0.35 ### 10:23:12.066174 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [S], seq 2294159276, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 557451322 ecr 0,sackOK,eol], length 0 10:23:12.265640 IP 10.100-78-194.akamai.com.http > 10.200.2.235.49247: Flags [S.], seq 2521908813, ack 2294159277, win 14480, options [mss 1367,sackOK,TS val 388565772 ecr 557451322,nop,wscale 1], length 0 10:23:12.276573 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [.], ack 1, win 8214, options [nop,nop,TS val 557451534 ecr 388565772], length 0 10:23:12.293030 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [P.], seq 1:480, ack 1, win 8214, options [nop,nop,TS val 557451552 ecr 388565772], length 479 10:23:12.574773 IP 10.100-78-194.akamai.com.http > 10.200.2.235.49247: Flags [.], ack 480, win 7776, options [nop,nop,TS val 388566081 ecr 557451552], length 0

  Read the article

• Eclipse Helios on OS X Snow Leopard crashes frequently when editing certain PHP files

  - by William

  I use Eclipse Helios (Eclipse Platform: 3.6.0.I20100608-0911, Eclipse IDE for PHP Developers: 1.3.0.20100617-0520) all the time on OS X (Snow Leopard), and it seems I only run into trouble whenever I'm editing a PHP file that's part of the WordPress blogging framework. When I move my cursor to a variable or function name, that often triggers the beach ball of death. I suspect Eclipse is trying to look up that variable/function and for some reason that causes an endless loop. Sometimes it's not just variables or functions. Just today I was trying to replace all occurrences of a quoted string. Every time I clicked "Replace All", the program would freeze immediately after the string was replaced and the text cursor was moved to the replaced position. I think the moving of the text cursor is important, because I got the same result when I searched for the string (thus moving the cursor), but NOT when I searched for a nonexistent string. I tried disabling everything in my preferences related to marked occurrences, hovering, code assistance, etc. Nothing helps. I use Eclipse for all my projects, and I find that it's only WordPress projects where this happens. Here's my eclipse.ini file: -startup ../../../plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar --launcher.library ../../../plugins/org.eclipse.equinox.launcher.cocoa.macosx_1.1.0.v20100503 -product org.eclipse.epp.package.php.product --launcher.defaultAction openFile -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Dosgi.requiredJavaVersion=1.5 -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -XX:PermSize=128m -XX:MaxPermSize=128m -XX:MaxGCPauseMillis=10 -XX:MaxHeapFreeRatio=70 -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalMode -XX:+CMSIncrementalPacing -XX:CompileThreshold=5 -Xms128m -Xmx512m -Xss2m -Xdock:icon=../Resources/Eclipse.icns -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -framework ../../../plugins/org.eclipse.osgi.services_3.2.100.v20100503.jar I have 4GB of RAM, so I don't know if the problem is I'm underutilizing my resources. Here's what I see over and over in the error log: !ENTRY org.eclipse.jface 2 0 2011-01-16 16:26:21.533 !MESSAGE Keybinding conflicts occurred. They may interfere with normal accelerator operation. !SUBENTRY 1 org.eclipse.jface 2 0 2011-01-16 16:26:21.533 !MESSAGE A conflict occurred for ALT+COMMAND+Q P: Binding(ALT+COMMAND+Q P, ParameterizedCommand(Command(org.eclipse.ui.views.showView,Show View, Shows a particular view, Category(org.eclipse.ui.category.views,Views,Commands for opening views,true), org.eclipse.ui.handlers.ShowViewHandler@2a46d1, [Lorg.eclipse.ui.internal.commands.Parameter;@18f50c2,,true), [Lorg.eclipse.core.commands.Parameterization;@1ff1855), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,cocoa,system) Binding(ALT+COMMAND+Q P, ParameterizedCommand(Command(org.eclipse.ui.views.showView,Show View, Shows a particular view, Category(org.eclipse.ui.category.views,Views,Commands for opening views,true), org.eclipse.ui.handlers.ShowViewHandler@2a46d1, [Lorg.eclipse.ui.internal.commands.Parameter;@18f50c2,,true), [Lorg.eclipse.core.commands.Parameterization;@96b40c), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,cocoa,system) !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.217 !MESSAGE System property http.proxyHost has been set to 127.0.0.1 by an external source. This value will be overwritten using the values from the preferences !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.217 !MESSAGE System property http.proxyPort has been set to 8888 by an external source. This value will be overwritten using the values from the preferences !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.218 !MESSAGE System property https.proxyHost has been set to 127.0.0.1 by an external source. This value will be overwritten using the values from the preferences !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.219 !MESSAGE System property https.proxyPort has been set to 8888 by an external source. This value will be overwritten using the values from the preferences I did some experimenting with the particular script that's giving me trouble. It's a hybrid of HTML and PHP, so Eclipse has to do both HTML and PHP validation. I wondered if the HTML validation had something to do with it, so I created a new file, copied the contents over, and messed with the doctype element. I found that if I replaced the well-formed XHTML 1.0 Strict doctype element with a generic doctype (as such: <!DOCTYPE html>), then I did not crash the program just by moving the cursor around. I set all HTML validation rules to "Ignore", but it still didn't solve my problems. For now, I'm just going to echo the doctype using PHP instead of entering it literally. That seems to prevent crashes. I notice that when I move the cursor around the document, Eclipse displays the "xpath" to my current location at the bottom of the screen. Sometimes there's a delay while it figures out my current path. Perhaps when it's validating against the Strict doctype, it has problems quickly calculating the xpath as I move the cursor around? Maybe it has a stack overflow that causes it to crash.

  Read the article

• php soapclient responds as 'null' but xml response is ok using __getLastResponse

  - by Roger S

  I'm looking for help with a php soapclient call: The call is to a remote panel and I want to pull off the log data. There are various services published via the WSDL and I am able to use several with no issues. Here's the list: array(12) { [0]=> string(77) "GetGPTimerChannelsResponse GetGPTimerChannels(GetGPTimerChannels $parameters)" [1]=> string(74) "GetGPTimerChannelResponse GetGPTimerChannel(GetGPTimerChannel $parameters)" [2]=> string(74) "SetGPTimerChannelResponse SetGPTimerChannel(SetGPTimerChannel $parameters)" [3]=> string(47) "GetSlaveResponse GetSlave(GetSlave $parameters)" [4]=> string(71) "GetLogDataInlineResponse GetLogDataInline(GetLogDataInline $parameters)" [5]=> string(71) "GetLogItemInlineResponse GetLogItemInline(GetLogItemInline $parameters)" [6]=> string(59) "GetAlarmListResponse GetAlarmList(GetAlarmList $parameters)" [7]=> string(50) "GetSyslogResponse GetSyslog(GetSyslog $parameters)" [8]=> string(47) "SetSlaveResponse SetSlave(SetSlave $parameters)" [9]=> string(53) "GetVersionResponse GetVersion(GetVersion $parameters)" [10]=> string(53) "GetTDBInfoResponse GetTDBInfo(GetTDBInfo $parameters)" [11]=> string(53) "GetLogItemResponse GetLogItem(GetLogItem $parameters)" } I am trying to use the GetLogDataInline service which requires four parameters - these I'm passing as an array and all seems OK when doing the connection (the request/response takes around 30 seconds to process). When I look at a var_dump / print_r of the result, it returns NULL, whereas when I do a call to the __getLastResponse all of the data I need to populate my local database is there. Below is the code for the soapclient call: $client = new soapclient ("http://192.168.1.126/cgi-bin/cgi.cgi?WSDL", array("trace" => 1, "exceptions" => true, "cache_wsdl" => WSDL_CACHE_NONE, "features" => SOAP_SINGLE_ELEMENT_ARRAYS )); $params = array ( "ResponseType" => "Xml", "Step" => 15, "Start" => "2012-06-14T12:00:00+01:00", "End" => "2012-06-14T23:59:45+01:00" ); $result = $client -> GetLogDataInline ($params); An extract from the var_dump / __getLastResponse is: var_dump($client) object(SoapClient)#1 (4) { ["trace"]= int(1) ["_features"]= int(1) ["_soap_version"]= int(1) ["sdl"]= resource(4) of type (Unknown) } var_dump($result) NULL __getLastResponse 15 2012-06-14T12:00:00+01:00 2012-06-14T23:59:45+01:00 External Temperature Workshop Lux Level Electricity Pulse 100wh Workshop PIR Active Boiler Flow Temp Outside Lux Workshop_Light_Override_Hours Water Consumption (Litres) Electricity kWh Consumption Water Consumption M3 Gas kWh Consumption Outside Lighting Heating Effective Setpoint Router Reset Workshop Lighting State Heating Run Hours Heating On Receptin Percent RH Reception Temp Reception RH Reception Temp 2012-06-14T12:00:00+01:00 -85.6 2.1 -1.0 Off -91.5 13.8 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 53.0 22.0 53.0 22.0 2012-06-14T12:00:15+01:00 -85.4 2.1 -1.0 Off -91.8 13.8 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 53.0 22.0 53.0 22.0 2012-06-14T12:00:30+01:00 -85.4 2.1 -1.0 Off -91.8 13.8 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 53.0 22.0 53.0 22.0 2012-06-14T12:00:45+01:00 -85.4 2.1 -1.0 Off -91.5 13.7 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 54.0 22.0 54.0 22.0 (this should be xml but doesn't appear to have copied correctly) If you've got this far, thanks for taking the time. Any help would be much appreciated.

  Read the article

• Can't log in via SSH to any accounts set to use /bin/bash as a default shell

  - by Gui Ambros

  I'm trying to install bash as the default shell on a ARM Linux running on an embedded device (Synology DS212+ NAS). But there's something really wrong, and I can't figure out what it is. Symptoms: 1) Root has /bin/bash as default shell, and can log in normally via SSH: $ grep root /etc/passwd root:x:0:0:root:/root:/bin/bash $ ssh root@NAS root@NAS's password: Last login: Sun Dec 16 14:06:56 2012 from desktop # 2) joeuser has /bin/bash as default shell, and receives "Permission denied" when trying to log in via SSH: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/bash $ ssh joeuser@localhost joeuser@NAS's password: Last login: Sun Dec 16 14:07:22 2012 from desktop Permission denied, please try again. Connection to localhost closed. 3) changing joeuser's shell back to /bin/sh: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/sh $ ssh joeuser@localhost Last login: Sun Dec 16 15:50:52 2012 from localhost $ To make things even more strange, I can log in as joeuser using /bin/bash using the serial console (!). Also a su - joeuser as root works fine, so the bash binary itself is working fine. In an act of despair, I changed joeuser's uid to 0 on /etc/passwd, but also didn't work, so it doesn't seem to be anything permission related. Seems that bash is doing some extra checking that sshd didn't like, and blocking the connections for non-root users. Maybe some sort of sanity checking - or terminal emulation - that is triggering the SIGCHLD, but only when called via ssh. I already went through every single item on sshd_config, and also put SSHD in debug mode, but didn't find anything strange. Here's my /etc/ssh/sshd_config: LogLevel DEBUG LoginGraceTime 2m PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile %h/.ssh/authorized_keys ChallengeResponseAuthentication no UsePAM yes AllowTcpForwarding no ChrootDirectory none Subsystem sftp internal-sftp -f DAEMON -u 000 And here's the output from /usr/syno/sbin/sshd -d, showing the failed attempt of joeuser trying to log in, with /bin/bash as the shell: debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: HPN Buffer Size: 87380 debug1: sshd version OpenSSH_5.8p1-hpn13v11 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: read PEM private key done: type ECDSA debug1: private host key: #2 type 3 ECDSA debug1: rexec_argv[0]='/usr/syno/sbin/sshd' debug1: rexec_argv[1]='-d' Set /proc/self/oom_adj from 0 to -17 debug1: Bind to port 22 on ::. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on :: port 22. debug1: Bind to port 22 on 0.0.0.0. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on 0.0.0.0 port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 6 out 6 newsock 6 pipe -1 sock 9 debug1: inetd sockets after dupping: 4, 4 Connection from 127.0.0.1 port 52212 debug1: HPN Disabled: 0, HPN Buffer Size: 87380 debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1-hpn13v11 SSH: Server;Ltype: Version;Remote: 127.0.0.1-52212;Protocol: 2.0;Client: OpenSSH_5.8p1-hpn13v11 debug1: match: OpenSSH_5.8p1-hpn13v11 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1-hpn13v11 debug1: permanently_set_uid: 1024/100 debug1: MYFLAG IS 1 debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: AUTH STATE IS 0 debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: client->server aes128-ctr hmac-md5 none SSH: Server;Ltype: Kex;Remote: 127.0.0.1-52212;Enc: aes128-ctr;MAC: hmac-md5;Comp: none debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: server->client aes128-ctr hmac-md5 none debug1: expecting SSH2_MSG_KEX_ECDH_INIT debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user joeuser service ssh-connection method none SSH: Server;Ltype: Authname;Remote: 127.0.0.1-52212;Name: joeuser debug1: attempt 0 failures 0 debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: PAM: initializing for "joeuser" debug1: PAM: setting PAM_RHOST to "localhost" debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user joeuser service ssh-connection method password debug1: attempt 1 failures 0 debug1: do_pam_account: called Accepted password for joeuser from 127.0.0.1 port 52212 ssh2 debug1: monitor_child_preauth: joeuser has been authenticated by privileged process debug1: PAM: establishing credentials User child is on pid 9129 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_new: session 0 debug1: session_pty_req: session 0 alloc /dev/pts/1 debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 9130 debug1: session_exit_message: session 0 channel 0 pid 9130 debug1: session_exit_message: release channel 0 debug1: session_by_tty: session 0 tty /dev/pts/1 debug1: session_pty_cleanup: session 0 release /dev/pts/1 Received disconnect from 127.0.0.1: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials Here you have the full output of sshd -dd, together with ssh -vv. Bash: # bash --version GNU bash, version 3.2.49(1)-release (arm-none-linux-gnueabi) Copyright (C) 2007 Free Software Foundation, Inc. The bash binary was cross compiled from source. I also tried using a pre-compiled binary from the Optware distribution, but had the exact same problem. I checked for missing shared libraries using objdump -x, but they're all there. Any ideas what could be causing this "Permission denied, please try again."? I'm almost diving in the bash source code to investigate, but trying to avoid hours chasing something that may be silly.

  Read the article

• Bitbucket SSH and iptables

  - by Astaz3l

  I'm a newbie in iptables to be honest. I have some basic rules. Everything is blocked by default. iptables -t filter -F iptables -t filter -X iptables -t filter -P INPUT DROP iptables -t filter -P FORWARD DROP iptables -t filter -P OUTPUT DROP iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT ...some rules for http, ftp etc... iptables -t filter -A OUTPUT -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -t filter -A INPUT -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT With the last two lines i'm trying to open the access for ssh so i can connect to bitbucket. When i try to connect to bitbucket: ssh -Tv [email protected] I got the error - connection timed out. But when I disable iptables i can connect without any problems. What am i missing? Should I add any additional rules?

  Read the article

• SQL like group by and sum for text files in command line?

  - by dnkb

  I have huge text files with two fields, the first is a string the second is an integer. The files are sorted by the first field. What I'd like to get in the output is one line per unique string and the sum of the numbers for the identical strings. Some strings appear only once while other appear multiple times. E.g. Given the sample data below, for the string glehnia I'd like to get 10+22=32 in the result. Any suggestions how to do this either with gnuwin32 command line tools or in linux shell? Thanks! glehnia 10 glehnia 22 glehniae 343 glehnii 923 glei 1171 glei 2283 glei 3466 gleib 914 gleiber 652 gleiberg 495 gleiberg 709

  Read the article

• Separating two networks

  - by Farhan Ali

  I have two routers, R1 and R2. R1 (a stock linksys router running dd-wrt) is connected to internet and is serving internet to a network of 5 devices/PCs running a DHCP server, with a network of 192.168.1.0/24. R1 also serves internet services to R2. R2 (a ubuntu server 12.04) gets internet from R1. R2 has 3 PCs attached to it, runs a DHCP server with a network of 172.22.22.0/24. My requirement is that the clients on both sides should not talk to each other at all – with the exception that R1 clients may access the R2 router through its IP of 192.168.1.x. At the moment, R2 clients are able to ping R1 clients, which is unacceptable, whereas R1 clients cannot ping R2 clients, which is OK. I believe iptables could be set up but I don't know how.

  Read the article

• Horrible performing RAID

  - by Philip

  I have a small GlusterFS Cluster with two storage servers providing a replicated volume. Each server has 2 SAS disks for the OS and logs and 22 SATA disks for the actual data striped together as a RAID10 using MegaRAID SAS 9280-4i4e with this configuration: http://pastebin.com/2xj4401J Connected to this cluster are a few other servers with the native client running nginx to serve files stored on it in the order of 3-10MB. Right now a storage server has a outgoing bandwith of 300Mbit/s and the busy rate of the raid array is at 30-40%. There are also strange side-effects: Sometimes the io-latency skyrockets and there is no access possible on the raid for 10 seconds. The file system used is xfs and it has been tuned to match the raid stripe size. Does anyone have an idea what could be the reason for such a bad performing array? 22 Disks in a RAID10 should deliver way more throughput.

  Read the article

• Getting packets from one port to another on a Dell PowerConnect 2824 switch

  - by Arvo Bowen

  I have a dell PowerConnect 2824 and I have a cat 5 cable connected from port 1 to port 23. Port 1 is reserved for VLAN 1 (the only VLAN that can manage the switch) and port 18-23 belong to VLAN 112. I currently have the switch setup with ip 10.71.3.5/27 and a test machine plugged into port 22 with IP address 10.71.3.30/27. For some reason I can not ping 10.71.3.5 from my test machine (10.71.3.30). Note: When I try to ping the server plugged into port 21 (IP: 10.71.3.7/27) also VLAN 112, I get responses just fine. Note: When I plug my test machine directly into port 1, I can ping 10.71.3.5 just fine. Quick Recap: Switch IP: 10.71.3.5 Port 1 - dedicated to management - (VLAN1) Port 21 - SERVER (10.71.3.7/27) - (VLAN112) Port 22 - test machine (10.71.3.30/27) - (VLAN112) Port 23 - dedicated to management (to hop over to VLAN 1 from VLAN 112) - (VLAN112)

  Read the article

• Access Monit on PHP

  - by xian

  i have a remote server (Centos 5.8) and i have installed monit on it as my monitoring tool. monit installation yum install monit now, on my local machine (still Centos5.8), i want to get the system status (shown below) of the said server provided by monit --------------------------------------------------- | Parameter | Value | --------------------------------------------------- | Name | serverHostname | | Status | Running | | Monitoring mode | active | | Monitoring status | Monitored | | Data collected | Fri, 22 Jun 2012 16:47:01 | | Load average | [0.32] [0.37] [0.43] | | CPU usage | 3.3%us 0.2%sy 0.0%wa | | Memory usage | 2005212 kB [53.9%] | | Swap usage | 893256 kB [21.8%] | --------------------------------------------------- This information is shown when you clicked on the system name link found on the your monit's home page http://localhost:2812 How can I do that in php? How can I retrieve those information? i was thinking of executing this linux command in php: /usr/bin/monit status Output of this is The Monit daemon 5.4 uptime: 2h 55m System 'system_asi454' status Running monitoring status Monitored load average [0.22] [0.34] [0.42] cpu 3.3%us 0.2%sy 0.0%wa memory usage 2005212 kB [53.9%] swap usage 892928 kB [21.8%] data collected Fri, 22 Jun 2012 16:47:01 which is similar to the table content show above.

  Read the article

• How do I delete a route in OS X 10.5

  - by authormichael-olsen-craig

  I somehow configured my Mac to route all requests for a particular IP Name (sample.com) to the loopback address (127.0.0.1). Now I'm trying to remove this, but can't determine where to do it. There is no entry for it under /etc/hosts. The routing table shows that it is mapping the IP Name to the IP address of the Mac. Routing table output below: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.2.1 UGSc 4 1 en0 127 sample.com UCS 0 0 lo0 sample.com sample.com UH 1 7093 lo0 169.254 link#4 UCS 0 0 en0 192.168.2 link#4 UCS 6 0 en0 192.168.2.1 0:11:22:22:3f:fa UHLW 20 55565 en0 1070 192.168.2.15 tsema.org UHS 0 9 lo0 192.168.2.255 link#4 UHLWb 4 84777 en0 Any help would be greatly appreciated!

  Read the article

• Installing Gitolite on NAS - FATAL: have errors but logging failed

  - by Jay

  I'm trying to install Gitolite on my Synology DiskStation, following these instructions: http://www.bluevariant.com/2012/05/comprehensive-guide-git-gitolite-synology-diskstation/ Under "Install Gitolite on the DiskStation and Run Setup" When I run the gitolite install command: DiskStation> /volume1/homes/git/gitolite/install -ln /bin I get the following error: FATAL: have errors but logging failed! 2012-05-31.00:10:22 no GL_LOGFILE env var 2012-05-31.00:10:22 die could not symlink /volume1/home/git/gitolite/src/gitolite to /bin<<newline>> at /volume1/home/git/gitolite/install line 71<<newline>> I am very new to all of this. Does anyone know what this means, and how I can fix this error? Thank you very much.

  Read the article

• apache2 mod_proxy without 301 moved permanently?

  - by Guy Sensei

  Is it possible to not send a 301 moved permanently response to the client when using mod_proxy? I would like the client to deal with the reverse proxy as opaquely as possible. My Virtual Host Settings- relevant snippet ProxyPreserveHost On ProxyPass /GTM http://192.168.1.27/GTM ProxyPassReverse /GTM http://192.168.1.27/GTM wget localhost/GTM --2011-09-27 21:54:22-- localhost/GTM Resolving localhost... ::1, 127.0.0.1 Connecting to localhost|::1|:80... failed: Connection refused. Connecting to localhost|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: localhost/GTM/ [following] --2011-09-27 21:54:22-- localhost/GTM/ Reusing existing connection to localhost:80. HTTP request sent, awaiting response... 200 OK

  Read the article

• vmware linux headers not found for ubuntu 10.10 ?

  - by Tumbleweed

  I've installed Vmware 6.5 on Ubuntu 10.10... when I start vmware player/workstation its asking for linux kernel header for some compilation but I'm not able to find the appropriate package, see the Image below.... Update after running following commands sudo -s cd /lib/modules/$(uname -r)/build/include/linux ln -s ../generated/utsrelease.h ln -s ../generated/autoconf.h Error has been changed like below.... ERROR: modinfo: could not find module vmmon ERROR: modinfo: could not find module vmnet ERROR: modinfo: could not find module vmblock ERROR: modinfo: could not find module vmci ERROR: modinfo: could not find module vsock Using 2.6.x kernel build system. make: Entering directory /tmp/vmware-root/modules/vmmon-only' make -C /lib/modules/2.6.35-22-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory/usr/src/linux-headers-2.6.35-22-generic' CC [M] /tmp/vmware-root/modules/vmmon-only/linux/driver.o In file included from /tmp/vmware-root/modules/vmmon-only/linux/driver.c:31: /tmp/vmware-root/modules/vmmon-only/./include/compat_wait.h:78: error: conflicting types for ‘poll_initwait’ include/linux/poll.h:72: note: previous declaration of ‘poll_initwait’ was here

  Read the article

• Why TVs are costlier than Monitor for same screen size?

  - by Vikrant Chaudhary

  Just wondering, why LCD/LED-backlit TVs cost more (almost double) than LCD/LED-backlit monitors for same screen size. Because I guess that TVs and Monitors, both use almost same technologies and both nowadays support some common connectors (HDMI/D-Sub/DVI etc). And since a Monitor has much higher resolution than a TV for that size, and they are used more closely than TVs, Monitors probably require more engineering effort. So, Monitors are supposed to be costlier than TVs, right? Ex: A ViewSonic (or any) 22"/26" monitor supports Full-HD resolution at 1080p (WSXGA+-1680×1050, WUXGA-1920×1200), while all 22"/26" HDTVs support HD-ready 720p (WXGA-1366x768) only, which is also the resolution of my Notebook's 15.6" screen.

  Read the article

• Urgent SSH Local Port Redirection

  - by Salina Odelva

  Hi, everyone. I have a shell account but the admin has restricted ssh access to the server. The server is listening on 0.0.0.0:22 but the firewall blocks any incoming attempts to this port. He says he is doing maintenance but I don't believe him and I need to backup my stuff with ssh. My question is that: Is it possible to do this: Me (Wan IP) <- Hosting Server (tcp/8080) redirects to Hosting Server (tcp/22) I don't want to involve my own linux machine in this and I can only make use of ssh.. Thanks!!

  Read the article

• Automatically allowing SSH into a machine behind a UPNP router?

  - by GJ

  Hi I have a MacBook connecting to the Internet from behind various routers from time to time (home, office, etc). All of the routers support UPNP. I need to allow a co-worker to SSH into the machine, without configuring each router each time to forward port 22 to the MacBook. Is there any way to get the MacBook to use UPNP (or some other method) to automatically configure any supporting router that it is behind to forward port 22 to itself? That would allow the co-worker to SSH into the MacBook but just knowing its external IP, which is easy.

  Read the article

• Can't bring NAT to work

  - by user31738

  Hello, I bought a D-link DIR-300 wireless router and i can't bring NAT to work, i have an ssh and http service i need to forward to the internet. My connection is as follows: I have an ADSL connection, i'm using a ADSL ethernet modem connected and working, it doesnt let me put it on bridge mode. I have my router connected to my adsl modem through ethernet, it gets its ip through DHCP (and i'ts always the same) I have a desktop computer running linux with apache and openssh configured and working, it has fixed ip. I configured the NAT in the modem forwarding port 22 from the router ip to the internet. In the router i setup NAT forwarding port 22 from the desktop computer fixed ip to out there. This setup already worked with a fonera i had before, can anyone help me with this or tell me what kind of tests do i need to do? How can i test if the router is forwarding ports correctly before the modem?

  Read the article

• Closing telnet connection gracefully from session mode itself without going to telnet prompt.

  - by Kumar Alok

  a normal telnet connection is like this: telnet localhost 22 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_4.2 ^] telnet close Connection closed. I want to close it from telnet session itself without coming to telnet prompt by pressing. My requirement is that if i press some control character from telnet session itself like CTRL+A so it will come out of session and close it automatically. something like this: $ telnet localhost 22 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_4.2 ^A Connection closed. $ I tried all the options given at the man page and tried to do some $HOME/.telnetrc file tests but couldn't achieve it, as telnetrc will execute all the commands written in it with the given host whenever a telnet to that host is done. Can anyone help me in this, like how it can be achieved.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >